2
PRODUCT BRIEF Elevator Cam Triangular corner mount housing Wall mount housing The Elevator Cam is a vandal resistant indoor digital surveillance camera for use in unattended or vandal prone areas. The high sensitivity camera captures high-resolution colour images in low light conditions when motion is detected. The images are stored on a removable memory card for easy viewing on a computer or PDA. The camera can also be configured to capture images on a time-lapse basis. No wireless receiver or no wireless transmitters = No interference No cabling = Cost effective installation The colour camera can store up to 32,000 images and will optionally overwrite the oldest images when the memory card is full - for ‘set and forget’ operation. The ElevatorCam can be housed in either a wall mount or a triangular corner mount lockable stainless steel case for optimum protection. High Capacity Rechargeable lithium ion battery When powered by the 7.5 Ah battery, the Camera can operate for up to 5 ½ months in standby mode. Utilising its patented ultra low power video processing technology, the camera can operate for more than 15 weeks when capturing 200 photos per day, every day of the week! 240v Permanent Power Installing a power point on top of the lift car will provide a permanent power source for the camera, with the onboard battery now becoming a backup battery. FEATURES • High sensitivity image sensor for low light operation • Lockable stainless steel case • Set and forget operation • High quality glass camera lens • Event-Triggered or Time-Lapse camera modes. • Flexible scheduler for independent arming and disarming • Time and date stamped event log • Image encryption for security • High speed image viewer included with setup software • Optional Black & White image sensor for very low light applications • Ideal for retro fitting into elevators – no need for expensive cabling throughout lift wells • Customised image-capture sequence & Pre-Trigger image capture • Digital signature including camera ID, within each image for legal verification • Standalone operation from 7.5Ah battery with 5 ½ months standby or 15weeks capturing 200images daily • Time and date stamped images with programmable text overlay • Camera installed in minutes (once a power point is installed) January 2010
