ÉQ
UIP
EM
EN
T D
’EM
BA
LLA
GE
PA
CK
AG
ING
EQ
UIP
ME
NT
IMPULSE SERIES
Table top I- bar impulse sealer with led indicator and timer. Five differents models and sizes available:
Scelleuse à impulsion I- bar portatif à témoin lumineux et minuterie.Cinq modèles et grandeurs disponibles:
I 8-20, I 12-30, I 16-40, I 24-60 & I 36-90. :110V
ECONO SERIES
Economical Table top I- bar shrink-wrap system. Impulsesealer with led indicator, timer, on/off switch, film separator,
and film roll holder, circuit breaker and heat gun. Three different models and sizes available:
Système d’emballage I- bar portatif économique. Scelleuse àimpulsion à témoin lumineux, minuterie, Disjoncteur interrupteur.Séparateur de pellicule. Support rouleaux, et fusil chauffant.Trois modèles et grandeurs disponibles:
E-12, E-18 & E-24. :110V
SOLUTION SERIES
An affordable & portable L- bar sealer and shrink tunnel.Sealer with complet digital & electronic controls, with film cradle,
separator & adjustable working table. Tunnel with temperaturecontrols & conveyor variable speed controls.
Système abordable et portatif de scelleuse en L-bar et tunnelchauffant. Scelleuse a Contrôle digital et électronique complet,support a pellicule separe et table de travail ajustable.Tunnel a controle de temperature & convoyeur a vitesse variable.
Sealer model: SOL-1216: 12” W X 16” L: 110Vtunnel model: SOT-126: 12” W X 6” H X 18” L : 220V OR 110V
B.B.Q. SERIES
One step seal & shrink unit, semi-automatic, magnet,digital & electronic display, for light production,
Console Stand on Casters available.
Scelleuse et tunnel semi-automatique modèlecloche, électromagnétique, controle digitale,Console à roulettes disponible.
Model: BBQ 1.5E: 11”W X 17” L X 4” H: 220V
Scelleuse modèle : SOL-1216: 40 cm X 50 cm : 110VTunnel modèle: SOT-126: 30 cm L X 15 cm H X 45 cm LO.: 220V OU 110V
Modèle: BBQ 1.5E: 28 cm L X 43 cm LO X 10 cm H : 220V
ALPHA SERIES
Compact L-bar sealer and shrink tunnel on one frame. Top bottom and sideheated air flow, twin blowers, adjustable sealing platform, 21" film capacity,
speed controlled tunnel conveyor mesh belt, fully digital & electronic controls,impulse sealing system, baked paint, fully upgradable easy add on options.
Scelleuse en L-bar et tunnel compact sur une seule platforme. Circulationd’air chaud du haut, bas et côté. Double souffleur à haute vélocité, Table detravail ajustable. Support de pellicule ajustable. Convoyeur du tunnel àvitesse variable filet en Teflon. Peinture cuite. Contrôle par système d’impulsion microprocesseur, contrôle complet digital & électronique,Concept modulaire, options faciles à ajouter.
Models: C1.0, C2.0, C2.5E, C3.0, C3.5E, C4.5E: 16”W X 20”L SEALER & 17” W X 9” H X 27” L TUNNEL:
220V or 220/110V
Modèles: C1.0, C2.0, C2.5E, C3.0, C3.5E, C4.5E: 40 cmL X 50 cmLO SCELLEUSE & 42 cm L X 22 cm H X 67 cm LO TUNNEL :220V ou 220/110V
GAMMA SERIES
medium duty L frame sealer, and / or tunnel Scelleuse en L-bar, et /ou tunnel compact .
Models: CS1.0, CS2.0, CS2.5E, CS3.0, CS3.5E, CS4.5E : 16”W X 20”L SEALER : 220V or 110V
And / or CT 1.0, CT 2.0, CT 3.0, CT 3.5E17” W X 9” H X 27” L TUNNEL: 220V or 220/110V
Modèles: CS1.0, CS2.0, CS2.5E, CS3.0, CS3.5E, CS4.5E : 40 cm X 50 cm Scelleuse : 220V ou 110VEt / ou CT 1.0, CT 2.0, CT 3.0, CT 3.5E :42 cm L X 22 cm H X 67 cm LO TUNNEL : 220V ou 220/110V
STARPAK SERIES
The advantages and the flexibility of two units on one heavy duty frame withone power source. Easy move forward and / or backward to centre product
into tunnel, pressicion height adjustable take-away conveyor, hand crank tunnel elevator to align with sealer, fully upgradable easy add on options.
Les avantages et la flexibilité de deux unités sur seul frame a une source électrique. Scelleuse ajustable horizontallement & tunnel ajustableverticalement pour meilleur transfert et rendement, options faciles à ajuster.
Models: U1.5E, U2.5E, U3.5E: 16”W X 20”L SEALER and 17” W X 9” H X 27” L TUNNEL :
220V or 220/110V
Modèles: U1.5E, U2.5E, U3.5E : 40 cmL X 50 cmLO SCELLEUSE & 42 cm L X 22 cm H X 67 cm LO TUNNEL :220V ou 220/110V
BETA SERIES
High production heavy-duty L- frame sealer, and / or, high productionheavy-duty tunnel.
Scelleuse en L-bar, et /ou tunnel, construction robuste .
Models: S1.0, S2.0, S2.5E, S3.0, S3.5E, S4.5E :22”W X 30”L SEALER : 220V or 110VAnd / or T 1.0, T 2.0, T 3.0, T 3.5E :
22” W X 12” H X 42” L TUNNEL : 220V or 480V
Modèles: S1.0, S2.0, S2.5E, S3.0, S3.5E, S4.5E : 55 cm X 75 cm Scelleuse : 220V ou 110VEt / ou CT 1.0, CT 2.0, CT 3.0, CT 3.5E : 55 cm L X 30 cm H X 105 cm LO TUNNEL : 220V ou 480V
DELTA SERIES
Delta models are available in differentheavy duty sealers and tunnels sizes:
Scelleuse en L-bar, et /ou tunnel, constructionrobuste différentes grandeurs disponibles
DS 30X30, DS 30X40, DS 40X40, DS 30X60, DS 30X80, DS30X90, DS30X108 & UP
DT 30 X 12”H X 52”L & UP.
DS 30X30, DS 30X40, DS 40X40, DS 30X60,DS 30X80, DS30X90, DS30X108 et plusDT 30 X 12”H X 52”L et plus.
OMEGA-LINE SERIES
Fully automatic - bar sealer (ALS 1.0), shrink tunnel CT3.5E, motorized infeed conveyor, 180 D gravity exit conveyor:
Scelleuse en L- bar complètement automatique ( ALS 1.0 ), tunnel CT 3.5E,convoyeur d’entre motorizer, 180 D convoyeur de sortie à gravité.
Sealer model ALS1.0 : 18” W x 20” L x 5” H. : 220V 15 amps, 80 psi
Scelleuse modèle ALS1.0 : 45 cm x 50 cm x 12 cm H . : 220V 15 amps, 80 psi
SIGMA-LINE SERIES
Semi & fully automatic sleeve wrappers &shrink tunnel with cooler systems.
Système d’emballage par manche & tunnel avecsystème de refroidissement.
Sealer model: SW1.0, SW2.0, SW3.0, SW4.0, SW5.0-OL-RA : 220V 15amps, 80 psi
Sizes: 24 x12, 32x16, 48x16, 60x16, 70x20 & up.
Scelleuse modèles : SW 1.0, SW2.0, SW3.0, SW4.0, SW5.0-OL-RA :220V 15amps, 80 psiSurface de scellage : ( 60x30, 80x40, 120x40, 150x40, 175x50 ) cm & plus.
OTHERS AUTRES
(1) Twin head sealer, (2) Motorized power film unwinds, re-trofit any equipment,
(3) Mailing machine, (4) Case sealer.
(5) In-line motorized speed controlled conveyors. (6) 90 degrees roller conveyor. 180 degrees rollers conveyor.
(7) Gravity rollers conveyor.(8) Turn table and S S-table. (9) Left-handed equipment.
(10) Stainless steel food grad equipments
(1) Scelleuse à double tête. (2) Débobineur à angle, motorisé. Pour tous types d’équipements.(3) Machine pour envoie postaux.(4) Scelleuse ( tapeuse ) à boîte.(5) Convoyeur en ligne motorisé à vitesse variable(6) 90º & 180º convoyeur à rouleaux.(7) Convoyeur de gravité à rouleaux.(8) Table tournante & table en acier inoxydable(9) Équipement pour gaucher.(10) Équipement en acier inoxydable
10
8
9
7
6
5
4
3
2
1
MODELS SHOWN FOR ILLUSTRATION PURPOSE ONLY
SATURN PACKAGING CUSTOMIZE SHRINK WRAP EQUIPMENT IN AWIDE RANGE OF SIZES, OPTIONS AND STAINLESS STEEL VERSIONS,FROM MANUAL TO FULLY AUTOMATIC MACHINES FROM 8” TO 108”LONG, TURNKEY PROJECTS, CHOICE OF COLORS, RENT & LEASING
AVAILABLE.
MODÈLES ILLUSTRÉS POUR DÉMONSTRATION SEULEMENT.
EMBALLAGE SATURN FABRIQUE SUR MESURE DES ÉQUIPEMENTS DEDIFFÉRENTES GRANDEURS, OPTIONS ET EN ACIER INOXYDABLE.DES SYSTÈMES MANUELS À AUTOMATIQUES DE 20 À 270 cm, PROJETCLÉS EN MAINS, CHOIX DE COULEURS, LOCATION & FINANCEMENTDISPONIBLE.
WWW.SATURNPACKAGING.COM 1-888-5 SEAL-IT ( 7325-48)
FAX: 514-956-8124