College to Corporate Service HYD | RJY |TPGUDEM Page 1

College to Corporate (Motivate, Educate and Transform)

Door no: 74-1-8, TTD Kalyanamandapam Road, Prakash Nagar, Rajahmundry-533013, East Godavari, AP.

CTC (Srihari gate academy), Rly station road/jubilee road, behind KSN complex, Tadepalligudem-1, West Godavari, AP.

Contact number: 9177543694 / 9885212436

College to Corporate Service HYD | RJY |TPGUDEM Page 2

EMBEDDED SYSTEMS 2013-2014 MAJOR PROJECT LIST

For ECE/EEE and EIE branches

1. GENERAL EMBEDDED PROJECTS 2. PC BASED PROJECTS 3. DTMF/ MOBILE BASED 4. VOICE BASED PROJECTS 5. RF BASED PROJECTS 6. X-BEE BASED PROJECTS 7. MEMS BASED PROJECTS 9. GSM BASED PROJECTS 10. GPS BASED PROJECTS 11. RFID BASED PROJECTS 12. SMART CARD BASED 13. BIO METRICS BASED 14. ROBOTICS / MECHARTONICS 15. COMBINATIONS

ADVANCED PROJECTS 1. BLUETOOTH BASED 2. TOUCH SCREEN BASED 3. THERMAL PRINTER BASED PROJECTS 4. GPRS/EMBEDDED NETWROKING BASED PROJECTS

EMBEDDED ELECTRICAL PROJECTS

EMBEDDED POWER ELECTRONICS

EMBEDDED MATLAB INTERFACING PROJECTS

College to Corporate Service HYD | RJY |TPGUDEM Page 3

EMBEDDED SYSTEMS 2013-2014 MAIN PROJECT LIST

GENERAL EMBEDDED PROJECTS: This section covers the hardware and software tools for the design and development of

reliable Embedded Electronic Systems, Intelligent Sensors and Actuators. Students can be able to learn about the GPIO embedded systems which find its application in almost all the areas of consumer electronics and real time embedded devices. A prototype of the real working model will be designed here to know the application, working principle, limitation and future scope of the project

CTC_GE_01 FLUID LEVEL INDICATOR WITH CONTROLLING AND MONITORING OF WEATHER IN INDUSTRIES

CTC_GE_02 TEMPERATURE MONITORING AND CONDITIONAL MAINTENANCE SYSTEM FOR OPERATION THEATERES FOR SURGERIES

CTC_GE_03 AUTOMATIC COLLEGE BELL SYSTEM (front end)

CTC_GE_04 DC MOTOR SPEED AND DIRECTION CONTROLLING USING PWM

CTC_GE_05 AC MOTOR SPEED CONTROL USING TRIAC

CTC_GE_06 DC MOTOR SPEED AND DIRECTION CONTROL USING IR REMOTE

CTC_GE_07 STEPPER MOTOR SPEED AND DIRECTION CONTROL USING IR

CTC_GE_08 SPEED CONTROL OF SINGLE PHASE INDUCTION MOTOR USING IR

CTC_GE_09 INDUSTRIAL ELECTRONIC DEVICE CONTROL THROUGH IR REMOTE

CTC_GE_10 AUTOMATIC RAILWAY GATE CONTROL SYSTEM USING IR

CTC_GE_11 IR REMOTE BASED APPLIANCE CONTROL SYSTEM

CTC_GE_12 INFRARED REMOTE RECEIVER

CTC_GE_13 VISITOR COUNTER WITH METAL DETECTOR ENHOUSED ENTRY,EXIT AND PRESENT COUNT

CTC_GE_14 AUTOMATIC ROOM LIGHT CONTROLLER WITH VISITOR COUNTER USING IR SENSOR

CTC_GE_15 HEAT PROTECTION SYSTEM WITH THERMOSTAT

CTC_GE_16 AUTOMATIC EMBEDDED GREEN HOUSE AUTOMATION SYSTEM

CTC_GE_17 EMBEDDED STREET LIGHT CONTROL SYSTEM

CTC_GE_18 CONFIGURABLE PASSWORD BASED AUTHENTICATION/ACCESS ACCESS AND SECURITY SYSTEM

CTC_GE_19 PASSWORD BASED DOOR LOCKING

CTC_GE_20 TIME BASED ELECTRICAL APPLIANCES CONTROL IN INDUSTRIES USING RTC

CTC_GE_21 MICROCONTROLLER BASED DIGITAL CLOCK WITH ALARM.

CTC_GE_22 POWER SAVER SYSTEM FOR ADVERTISEMENT HOARDINGS USING RTC

CTC_GE_23 EMBEDDED ENERGY SAVER SYSTEM FOR HOME APPLIANCES

College to Corporate Service HYD | RJY |TPGUDEM Page 4

CTC_GE_24 EMBEDDED PREPAID ENERGY METER

CTC_GE_25 POWER MANAGEMENT SYSTEM FOR SEMINAR HALLS/AUDITORIUMS

CTC_GE_26 BANK LOCKER SECURITY SYSTEM WITH PASSWORD AND INTRUDER ALARM

CTC_GE_27 ADVANCED EMBEDDED AUTOMATIC CAR PARKING SYSTEM

CTC_GE_28 STOP WATCH WITH LAPSE FOR ATHLETICS

CTC_GE_29 AUTOMATIC INTER GATE LOCKING SYSTEM FOR TOLL TAX

CTC_GE_30 ANTI-THEFT ALARM SYSTEM

CTC_GE_31 INTELLIGENT OBJECT COUNTING SYSTEM

CTC_GE_32 WIRELESS BASED AUTOMATION OF SHUTTER CONTROL SYSTEM

CTC_GE_33 DAM GATES CONTROL

CTC_GE_34 AUTOMATIC PLANT IRRIGATION SYSTEM

CTC_GE_35 POWER SAVING SYSTEM FOR SHOPPING MALLS USING 8051

CTC_GE_36 ELECTRONIC VOTING MACHINE

CTC_GE_37 DRIVER LESS VEHICLE NAVIGATION SYSTEM

CTC_GE_38 AUTOMATIC SOLAR TRACKING SYSTEM

CTC_GE_39 ALCOHOL DETECTOR SYSTEM FOR SURVELLIANCE COPS ON HIGHWAYS

CTC_GE_40 SOLAR TRACKING SYSTEM USING LDR

CTC_GE_41 AUTOMATED SOLAR PANEL CONTROLLER USING RTC

CTC_GE_42 TEMPARATURE MONITORING AT A BOILER

CTC_GE_43 TRAFFIC CONTROL SYSTEM WITH TIMMER

CTC_GE_44 TEMPERATURE ANALYZING SYSTEM FOR INDUSTRIAL CONTROL

CTC_GE_45 MULTI CHANNEL FAULT ANNOUNCEMENT SYSTEM USNG TEMPERATURE, SMOKE AND LDR SENSORS

CTC_GE_46 PREPAID ENERGY METER

CTC_GE_47 POSTPAID ENERGY METER

CTC_GE_48 HIGH SECURITY WINDOWS USING MICROCONTROLLER

CTC_GE_49 INTERFACING OF GRAPHICAL LCD TO MICROCONTROLLER

CTC_GE_50 FAULT PROTECTION & RECTIFICATION IN AC TRANSMISSION LINES

CTC_GE_51 PC BASED DATA LOGGER SYSTEM

CTC_GE_52 AUTOMATIC GAS LEAKAGE ALERTING SYSTEM

CTC_GE_53 SMOKE SENSING DEVICE

CTC_GE_54 FIRE SENSOR BASED ALARM SYSTEM

CTC_GE_55 ELECTRONIC EYE FOR SENSING MULTI COLORS

CTC_GE_56 MULTI COLOR SENSING AND IDENTIFICATION USING ELECTRONIC EYE

College to Corporate Service HYD | RJY |TPGUDEM Page 5

CTC_GE_57 DIFFERENT COLORED OBJECTS SEGGRETATION BASED ON COLOR SENSOR THROUGH ADC

CTC_GE_58 INDUSTRIAL SECURITY SYSTEM (FIRE,SMOKE,IR)

PC BASED PROJECTS PC based Embedded projects have their own way of application and ease of operation, all the PC based embedded projects will be interfaced with a VB front end, which uses the hyper terminal application of the windows OS and serves the purpose of communications through serial interface. These projects include, monitoring systems, navigation systems and control systems. The serial communication interface will be RS232 protocol for which we use MAX 232 IC as a hardware component

CTC_PC_01 PC BASED HITECH HOME IMPLEMENTATION

CTC_PC_02 REAL TIME COLLEGE ALARM USING PC CTC_PC_03 PC BASED INDUSTRIAL PARAMETERS ANNOUNCEMENT SYSTEM CTC_PC_04 PC BASED ROBOT NAVIGATIONSYSTEM

CTC_PC_05 PC BASED WIRELESS ROBOT CONTROL SYSTEM

CTC_PC_06 DEVICE CONTROL USING PC WIRELESS

CTC_PC_07 PC BASED OPTIMIM POWER MANAGEMENT SYSTEM FOR HOTELS

CTC_PC_08 STREET LIGHT MANAGEMENT USING PC

CTC_PC_09 POWER CUT SCHEDULING USING PC

CTC_PC_10 EMPLOYEE LOG SYSTEM USING PC AND RFID

CTC_PC_11 EASY MESSAGE SENDING USING PC

CTC_PC_12 PC BASED STEPPER MOTOR SPEED AND DIRECTION CONTROL

DTMF/ MOBILE BASED Dual Tone Multiple Frequency (DTMF) is a signaling system for identifying the keys or better says the number dialed on a pushbutton or DTMF keypad. DTMF has enabled the long distance signaling of dialed numbers in voice frequency range over telephone lines. We use a DTMF decoder namely MT/MT/HT-8870/9170 to decode the signals received by the DTMF decoder Which provides us the binary equivalent of the tone received ex: for 3 it would be 0011, which can be fed to the digital controller to perform the operations needed.

CTC_DT_01 IVRS SYSTEM USING DTMF

CTC_DT_02 DTMF BASED DEVICE CONTROL

CTC_DT_03 DTMF BASED HOME AUTOMATION

College to Corporate Service HYD | RJY |TPGUDEM Page 6

CTC_DT_04 DTMF BASED INDUSTRIAL PARAMETER CONTROLLING SYSTEM

CTC_DT_05 DTMF BASED MOTOR CONTROLWITHOUT MOBILE PHONE

CTC_DT_06 DTMF BASED SECURITY LOCKING SYSTEM

CTC_DT_07 ROBOT CONTROL THROUGH MOBILE PHONE

VOICE BASED PROJECTS Voice based projects could be very useful as the acknowledgement or the response from the system will be a voice to let us know the system status or the output of our project, the voice output could be a from a frontend software or a voice IC APR9600 in which we can record, playback and can erase the voice chunks according to our project, these kind of projects find to be very useful for blind people.

CTC_VB_01 TEXT TO VOICE CONVERSION ON PC [with front end]

CTC_VB_02 MOBILE BASED TEXT TO VOICE CONVERSSION[with front end]

CTC_VB_03 INDUSTRIAL PARAMETERS MONITORING THROUGH VOICE [with front end]

CTC_VB_04 HI_TECH SAFETY IMPLEMENTATION BY VOICE COMMANDS [with front end]

CTC_VB_05 POWER PLANT FALSE ALARM SYSTEM THROUGH VOICE [with front end]

CTC_VB_06 IVRS THROUGH PC [with front end]

CTC_VB_07 AUTOMATIC STATION INDICATION SYSTEM USING APR9600 CTC_VB_08 ENVIRONMENTAL PARAMETERS MONITORING THROUGH VOICE [front end]

RF BASED PROJECTS Wireless communication and wireless control systems has been useful in many daily life activities in both Home and industrial applications. Most of the time it is used in the place where there needs to perform operations in areas hovering hazardous gases or radiation where human intervention could be go, but operations should be performed

CTC_RF_01 RF BASED INDUSTRIAL AUTOMATION SYSTEM

CTC_RF_02 SAFE SWITCHING OF HIGH VOLTAGE DEVICES USING RF REMOTE SYSTEM

CTC_RF_03 WIRELESS DATA ENCRYPTION AND DECRYPTION FOR SECURITY IN ARMY APPLICATIONS

CTC_RF_04 WIRELESS DATA LOGGER USING RF COMMUNICATION

CTC_RF_05 WIRELESS ELECTRONIC NOTICE BOARD USING RF

CTC_RF_06 ADVANCED EMBEDDED REMOTE CONTROL ROBOT NAVIGATION SYSTEM USING RF

College to Corporate Service HYD | RJY |TPGUDEM Page 7

CTC_RF_07 AUTOMATIC STATION INDICATION SYSTEM FOR RAILWAYS USING LCD/APR9600

CTC_RF_08 WIRELESS INDUSTRIAL SECURITY SYSTEMS FOR FACTORIES

CTC_RF_09 PC BASED RAILWAY GATE CONTROL USING R.F. COMMUNICATION

CTC_RF_10 WIRELESS TEMPERATURE MONITORING SYSTEM USING R.F COMMUNICATION

CTC_RF_11 RF BASED SECURITY SYSTEM FOR BANKING APPLICATIONS.

CTC_RF_12 RF BASED PATIENT MONITORING SYSTEM

CTC_RF_13 WIRELESS FIRE ALARM & MONITOR ON LCD

CTC_RF_14 WIRELESS DIGITAL CODE LOCK WITH STATUS DISPLAY

CTC_RF_15 SPEED CONTROL OF SINGLE PHASE INDUCTION MOTOR USING RF

CTC_RF_16 RF CONTROLED ROBOT WITH NAVIGATION

CTC_RF_17 HOME APPARATUS CONTROLED THROUGH RF

CTC_RF_18 WIRELESS INTRUSION DETECTION, ELECTRONIC SECURITY AND CONTROL USING CENTRAL MONITORING SYSTEM

CTC_RF_19 MODERN BUS STATION USING RF (VOICE ANNOUNCEMENT)

CTC_RF_20 DC MOTOR SPEED AND DIRECTION CONTROL USING RF

CTC_RF_21 DC MOTOR SPEED AND DIRECTION CONTROL USING RF WITH PC

CTC_RF_22 AC MOTOR SPEED AND DIRECTION CONTROL USING RF

CTC_RF_23 AC MOTOR SPEED AND DIRECTION CONTROL USING RF WITH PC

CTC_RF_24 WIRELESS STEPPER MOTOR CONTROL USING RF

CTC_RF_25 WIRELESS STEPPER MOTOR CONTROL USING RF WITH PC

X-BEE BASED PROJECTS

Zigbee is a low power spin off of Wi-Fi. It is a specification for small, low power radios based on IEEE 802.15.4 – 2003 Wireless Personal Area Networks standard. Applications include wireless light switches, electrical meters with in-home-displays, traffic management systems, and other consumer and industrial equipment that requires short-range wireless transfer of data at relatively low rates. ZigBee operates in the industrial, scientific and medical (ISM) radio bands; 868 MHz in Europe, 915 MHz in the USA and Australia, and 2.4 GHz in most jurisdictions worldwide.

CTC_XB_01 WIRELESS DATA TRANSMISSION USING X-BEE/ZIG-BEE

CTC_XB_02 INDUSTRIAL PARAMETERS MONITORING & CONTROLLING USING X-BEE/ZIG-BEE

CTC_XB_03 MULTIPLE DEVICES CONTROLLING USING X-BEE/ZIG-BEE

College to Corporate Service HYD | RJY |TPGUDEM Page 8

CTC_XB_04 SPEED & DIRECTION CONTROLLING OF STEPPER MOTOR USING X- BEE/ZIG-BEE

CTC_XB_05 PC BASED POWER PLANT PARAMETERS MONITORING & CONTROLLING USING X-BEE/ZIG-BEE

CTC_XB_06 X-BEE/ZIG-BEE BASED PICK & PLACE ROBOT CTC_XB_07 X-BEE/ZIG-BEE BASED TEMPERATURE MONITORING ROBOT

CTC_XB_08 POWER PLANT PARAMETERS MONITORING AND CONTROLLING USING X-BEE/ZIG-BEE

CTC_XB_09 SPEED CONTROL OF SINGLE PHASE INDUCTION MOTOR USING X - BEE /ZIG-BEE

CTC_XB_10 DATA LOGGER USING X- BEE/ZIG-BEE CTC_XB_11 X-BEE/ZIG-BEE BASED NODAL (NODES) COMMUNICATION THROUGH WEB SERVER

CTC_XB_12 DEVELOPMENT OF A SMART POWER METER FOR AMI BASED ZIGBEE

CTC_XB_13 REMOTE-CONTROLLABLE AND ENERGY-SAVING ROOM ARCHITECTURE BASED ON

ZIGBEE CTC_XB_14 ZIGBEE BASED WIRELESS ELECTRONIC NOTICE BOARD CTC_XB_15 WIRELESS DATA ENCRYPTION AND DECRYPTION USING ZIGBEE CTC_XB_16 ZIGBEE BASED REAL TIME FLUID TANK LEVEL MONITOR AND CONTROL CTC_XB_17 PATIENT HEALTH MONITORING SYSTEM USING ZIGBEE

CTC_XB_18 A WIRELESS DATA ACQUISITION AND TRANSMISSION SYSTEM DESIGN

CTC_XB_19 GREEN HOUSE MONITORING AND CONTROLING THROUGH ZIGBEE COMMUNICATION

CTC_XB_20 DESIGN OF MONITOR-AND-CONTROL SYSTEM FOR SUPERMARKET FRESH AREA BASED ON ZIGBEE

MEMS BASED PROJECTS

Micro-Electro-Mechanical Systems or MEMS Technology is a precision device technology that integrates mechanical elements, sensors, actuators, and electronics on a common silicon substrate through micro fabrication technology. This technology is used to fabricate miniature size systems comprising of electronic and mechanical components. The size of the system may vary from a few microns or lower to a few millimeters. MEMS have proven to be highly efficient technology with huge potential. Some example of the application of this technology includes sensors, accelerometers, printer cartridge, robots etc.

CTC_ME_01 MEMS BASED DRIVING SIMULATION [with front end]

CTC_ME_02 WHEEL CHAIR DIRECTION CONTROL WITH GESTURE RECOGNITION (MEMS ACCELEROMETER)

CTC_ME_03 AUTOMATIC FALL DETECTION AND ACTIVITY MONITORING FOR ELDERLY PEOPLE

College to Corporate Service HYD | RJY |TPGUDEM Page 9

CTC_ME_04 WIRELESS MOUSE WITH MEMS ACCELEROMETER [with front end] CTC_ME_05 HEAD MOVEMENT TRACKING SYSTEM

CTC_ME_06 ACCELEROMETER BASED HAND GESTURE RECOGNITION SYSTEM CTC_ME_07 MEMS BASED VEHICLE INCLINATION MONITOR

CTC_ME_08 MEMS BASED ROBO CONTROL[WIRELESS/WIRED]

CTC_ME_09 MEMS BASED HOME APPLIANCE CONTROL [WIRELESS/WIRED]

GSM BASED PROJECTS

Global System for Mobile communication (GSM) is an architecture used for mobile communication in most of the countries. Since its inception, GSM was destined to employ digital rather than analog technology and operate in the 900 MHz frequency band. Most GSM systems operate in the 900 MHz and 1.8 GHz frequency bands, we use a GSM modem namely simcomm300 which can be used as an imitation of mobile phone to receive and send the signals over the GSM band, this GSM modem can be operated using some set of commands, this modem works on serial communication interface. GSM finds its applications in device switching, vehicle navigation communication, monitoring, authentication and security.

CTC_GS_01 HOME SECURITY USING GSM

CTC_GS_02 AGRICULTURE FIELD MOTOR CONTROL SYSTEM USING GSM

CTC_GS_03 INDUSTRIAL ELECTRICAL DEVICES CONTROL SYSTEM THROUGH GSM

CTC_GS_04 FIRE DETECTION AND AUTOMATIC ALERT SYSTEM

CTC_GS_05 WEATHER MONITORING SYSTEM IN REMOTE PLACES USING GSM

CTC_GS_06 GSM BASED DC MOTOR SPEED AND DIRECTION CONTROL

CTC_GS_07 SMS BASED ELECTRICAL APPLIANCE CONTROL FOR HOME /OFFICE

CTC_GS_08 EMBEDDED AUTOMATIC ROBOTIC VEHICLE NAVIGATIONSYSTEM THROUGH SMS

CTC_GS_09 E-CHALLAN BILLING SYSTEM USING GSM

CTC_GS_10 SUBSTATION MONITORING AND CONTROL SYSTEM USING GSM

CTC_GS_11 WATER RESERVOIR MONITORING AND PUMPING SYSTEM USING GSM.

CTC_GS_12 INDUSTRIAL DATA LOGGER USING GSM

CTC_GS_13 REMOTE POWER LINE DATA MONITORING SYSTEM USING GSM

College to Corporate Service HYD | RJY |TPGUDEM Page 10

CTC_GS_14 SPEED CONTROL OF THREAD ROLLER’S AC MOTOR IN SPINNING MILLS USING GSM MODEM

CTC_GS_15 REAL-TIME INDUSTRIAL PROCESS CONTROLLING & MONITORING USING MOBILE

CTC_GS_16 GSM BASED INDUSTRIAL PARAMETER MONITORING SYSTEM USING SERIAL COMMUNICATION AND ANALOG TO DIGITAL CONVERTERS.

CTC_GS_17 INDUSTRIAL EIGHT CHANNEL DATA LOGGER USING GSM MODEM

CTC_GS_18 INTELLIGENT SYSTEM FOR HAZARDOUS GAS, HUMAN DETECTION AND TEMPERATURE MONITORING IN COAL MINESUSING GSM

CTC_GS_19 AN ADVANCED EMBEDDED MOBILE WEB SERVER FOR AGED PEOPLE MONITORING AND PARAMETER BACK RECEPTION USING GSM TECHNOLOGIES

CTC_GS_20 GSM BASED EXAM RESULTS ACQUISITION SYSTEM FROM SERVER DATABASE

CTC_GS_21 RAILWAY ACCIDENT IDENFITICATION AND ALERT SYSTEM

CTC_GS_22 TEMPERATURE MEASUREMENT OVER GSM MOBILE

CTC_GS_23 PASSWORD PROTECTED GSM BASED DEVICE CONTROL

CTC_GS_24 REMOTE MONITORING OF VEHICULAR PARAMETERS THROUGH GSM MODULE

CTC_GS_25 EASY SMS SYSTEM

CTC_GS_26 SMS POLL COUNTING SYSTEM FOR TV SHOWS

CTC_GS_27 SMS BASED ELECTRICAL APPARATUS CONTROL IN OFFICES

CTC_GS_28 SCHEDULE DATA CAPTURING USING GSM.

CTC_GS_29 DEVELOPMENT OF AN EMBEDDED SYSTEM FOR UNMANNED RAILWAY GATE

CTC_GS_30 AUTOMATIC MOBILE ALERT SYSTEM FOR LETHAL GAS DETECTION

CTC_GS_31 ENGINE MONITORING THROUGH GSM MODEM

CTC_GS_32 SMS BASED BANKING SECURITY SYSTEM

CTC_GS_33 GSM BASED SMART INFORMATION SYSTEM FOR LOST ATM CARDS

CTC_GS_34 GSM BASED DEVICE MONITORING AND CONTROLLING SYSTEM WITH ELECTROMAGNETIC RELAY TO CONTROL 230 VOLTS A.C. ,20AMP LOAD (PRACTLLY DEVELOPED IN OIL RIGS IN PETROLIUM INDUSTRIES)

CTC_GS_35 GSM BASED STEPPER MOTOR CONTROL SYSTEM

CTC_GS_36 POWER GRID CONTROL USING GSM

CTC_GS_37 GSM BASED DOOR OPENING AND CLOSING SYSTEM

CTC_GS_38 SMS BASED MOTOR SPEED CONTROL

CTC_GS_39 VEHICLE OVER SPEED INDICATION TO TRAFFIC CONTROL ROOM THROUGH GSM

CTC_GS_40 TRAFFIC JAM UPDATES AT SIGNALS ( RF )

CTC_GS_41 DAM LEVEL WARNING USING GSM SMS

College to Corporate Service HYD | RJY |TPGUDEM Page 11

CTC_GS_42 MODERN ATOMIZED THEFT PROOF MUSEUMS

CTC_GS_43 CONTROL OF SOIL MOISTURE IRRIGATION SYSTEM

CTC_GS_44 EASY SMS SYSTEM

CTC_GS_45 DEVELOPMENT OF A GSM BASED VEHICLE SECURITY SYSTEM

CTC_GS_46 DEVELOPMENT OF A GSM BASED LCD DISPLAY

CTC_GS_47 GSM INTERGRATED SMART ATM TRANSACTION SYSTEM

CTC_GS_48 SMS BASED DC MOTOR SPEEDAND DIRECTION CONTROL

CTC_GS_49 SMS BASED AC MOTOR SPEEDAND DIRECTION CONTROL

CTC_GS_50 GSM BASED FIRE ALERTING AND CONTROLING SYSTEM WITH THERMOSTAST

CTC_GS_51 A SMART GSM BASED EMBEDDED SOLUTION FOR CONTINUOUS REMOTE MONITORING OF CARDIAC PATIENTS

CTC_GS_52 GSM BASED VEHICLE FUEL LEVEL MONITORING THROUGH SMS

CTC_GS_53 AUTOMATIC METER READING USING GSM GPS BASED PROJECTS

GPS works all across the world and in all weather conditions, thus helping users track locations, objects, and even individuals! GPS technology can be used by any person if they have a GPS receiver. GPS has become an efficient tool in the field of scientific use commerce, surveillance and tracking. GPS is used except in locations where it is difficult to detect the signal for example, underwater, subterranean location, inside the building and caves. Applications: Navigation, Geo-tagging, Surveying, Map-making, Tectonics

CTC_GP_01 ACQUIRING ALTITUDE, LONGITUDE AND LATITUDE POSITION ON X,Y & Z AXIS FOR A SPECIMEN IN MOTION

CTC_GP_02 PC INTERFACING USING GPS TECHNOLOGY CTC_GP_03 AUTOMOBILE THEFT IDENTIFICATION USING GPS

CTC_GP_04 GPS BASED STATION ARRIVAL ANNOUNCEMENT SYSTEM FOR BUSES / TRAINS CTC_GP_05 GPS BASED HIGH PRECISION UNIVERSAL CLOCK FOR ATOMIC LABORATORIES

RFID BASED PROJECTS

RFID (Radio frequency identification) tag is also called as Transponder. This operates on 1.25 KHz. It is a low power consumption unit. It consists of digital data in the form of active RF zip. It sends the digital data to the RFID reader through internal Antenna. RFID reader is also called as Interrogator. RFID reader it receives the data from Tag through Antenna. The received data is coded by the using Manchester coding and sends serially to the controller through RS232; from there we can use that data for different kind of applications like authentication, ID access, account management, price tags and also in security systems

College to Corporate Service HYD | RJY |TPGUDEM Page 12

CTC_RD_01 RFID BASED ATTENDANCE SYSTEM. [with front end]

CTC_RD_02 ERFID BASED SECURITY AUTHENTICATION SYSTEM CTC_RD_03 RFID BASED BANKING SYSTEM. CTC_RD_04 LIBRARY MANAGEMENT SYSTEM USING RFID CTC_RD_05 BUS LOCATION ANNOUNCEMENT SYSTEM

CTC_RD_06 RFID BASED PARCEL TRACING SYSTEM CTC_RD_07 RFID BASED RATION CARD CTC_RD_08 RFID BASED HIGHWAY TOLL COLLECTION CTC_RD_09 DEVELOPMENT OF AN EMBEDDED SYSTEM USING RFID BASED SECURITY SYSTEM

CTC_RD_10 RFID R/W BASED PREPAID ENERGY METER

CTC_RD_11 RFID BASED CAR PARKING SYSTEM CTC_RD_12 AUTONOMOUS NAVIGATION OF RFID SENSING ROBOTS CTC_RD_13 RFID BASED DOOR LOCKING SYSTEM CTC_RD_14 RFID BASED ATM SYSTEM

CTC_RD_15 RFID BASED NATIONAL CARD/ PASSPORT SYSTEM CTC_RD_16 RFID BASED N.G.O./STUDENT BUS PASS ID SYSTEM CTC_RD_17 RFID BASED SECURITY SYSTEM FOR MINING INDUSTRIES [with front end]

CTC_RD_18 EXAMINATION ROOM GUIDE USING RFID FOR THE JUMBLING SYSTEM BASED EXAMS

CTC_RD_19 EZEE LINK CARD FOR PUBLIC TRANSPORT SYSTEM [with front end]

SMART CARD BASED

The term smart card has been used to describe a class of credit-card-sized devices with varying capabilities: stored-value cards, contactless cards, and integrated circuit cards (ICC).To promote data security and date integrity the International Standards Organization (ISO) developed the ISO 7816 standards for integrated circuit cards with contacts. These specifications focused on interoperability at the physical, electrical, and data-link protocol levels. These cards play a vital role in our daily life as identification cards, Sodexho cards, shopping cards, and in some other corporate sectors.

CTC_SC_01 EZEE LINK CARD FOR PUBLIC TRANSPORT SYSTEM

CTC_SC_02 SMART CARD BASED ATTENDANCE SYSTEM

CTC_SC_03 SMART CARD BASED SECURITY ACCESS CONTROL SYSTEM

College to Corporate Service HYD | RJY |TPGUDEM Page 13

CTC_SC_04 UNMANNED PETROL BUNK SYSTEM

CTC_SC_05 PREPAID CARD FOR INTERNET BROWSING SYSTEM

CTC_SC_06 PREPAID ENERGY METER USING SMART CARD

CTC_SC_07 VEHICLE PARKING SYSTEM USING SMART CARD

CTC_SC_08 AUTOMATIC DOOR OPEING AND CLOSING USING SMART CARD

CTC_SC_09 HOSPITAL MANAGEMENT SYSTEM USING SMART CARD

BIO METRICS BASED

Finger print identification is one of the most well-known and publicized bio metrics, because of their uniqueness and consistently over time, finger prints have been used for identification for over a century, more recently becoming automated due to advancements in computing capabilities. Finger print identification is popular because of the inherent ease in acquisition, the numerous sources available for collection, and their established use and collections by law enforcement and immigration

CTC_BM_01 FINGERPRINT BASED AUTHENTICATION SYSTEM.

CTC_BM_02 FINGERPRINT BASED BANK LOCKER SYSTEM.

CTC_BM_03 FINGERPRINT BASED ATTENDANCE RECORD SYSTEM.

CTC_BM_04 FINGERPRINT BASED LIFT OPERATING SYSTEM.

CTC_BM_05 FINGERPRINT BASED ELECTRONIC VOTING SYSTEM.

CTC_BM_06 FINGER PRINT BASED SECURITY SYSTEM.

CTC_BM_07 FINGER PRINT BASED VEHICLE SECURITY SYSTEM.

CTC_BM_08 FINGER PRINT RECOGNIZED ATM SYSTEM.

CTC_BM_09 FINGER PRINT BASED PHYSICAL ACCESS CONTROL VEHICLE IMMOBILIZER

ROBOTICS / MECHARTONICS

Robotics is a really interesting topic still widening its horizons with the integration of electronics. Robotics include Human Machine Interface (HMI), Human Motion Sensors, Luminescence Sensors, Touch Screens, Temperature Controllers, Optical Sensors, Ultrasonic Sensors, and depending on the sensor input they perform the specific operation which can be an automated or a manual operation, Mechatronics is the combination of Mechanical engineering, Electronic engineering, Computer engineering, Software engineering, Control engineering, and Systems Design engineering in order to design and manufacture useful products. Mechatronics is a multidisciplinary field of engineering, that is to say it rejects splitting engineering into separate disciplines. Originally, mechatronics just included the combination between mechanics and electronics

College to Corporate Service HYD | RJY |TPGUDEM Page 14

CTC_MH_01 PATH TRACKING ROBO

CTC_MH_02 REMOTE CONTROLLED ROBOT

CTC_MH_03 THERMAL ANALYSIS ROBOT

CTC_MH_04 DEFENSE APPLICATION ROBOT

CTC_MH_05 WIRELESS PICK & PLACE ROBOT

CTC_MH_06 AGRICULTURE ROBOT

CTC_MH_07 DISTANCE MEASUREMENT ROBOT

CTC_MH_08 OBSTACLE DETECTION ANDAVOIDANCE ROBOT

CTC_MH_09 MAGNETIC LIFTER

CTC_MH_10 PC BASED WIRELESS ROBOT CTC_MH_11 LIVE HUMAN IDENTIFICATION ROBOT

CTC_MH_12 THREE AXIS ROBOTIC ARM FOR INDUSTRIES

CTC_MH_13 WIRELESS ROBOT WITH SPEED CONTROL

CTC_MH_14 SOLAR BASED ROBOT

CTC_MH_15 WIRELESS ROBOTIC ARM

CTC_MH_16 THREE DEGREE FREEDOM ROBOT

CTC_MH_17 METAL DETECTING ROBOT

CTC_MH_18 OBJECT SENSING, PICK & PLACE ROBOT

CTC_MH_19 GAS DETECTION ROBOT FOR ATOMIC POWER STATION

CTC_MH_20 WATER SPRINKLING ROBOT FOR FIRE SAFETY

CTC_MH_21 PICK AND PLACE ROBOT WITH PARALLELISM MECHANISM

CTC_MH_22 MOBILE PHONE OPERATED ROBOT

CTC_MH_23 ROBOT NAVIGATION WITH WIRELESS CAMERA

CTC_MH_24 SMOKE SENSING ROBOT

CTC_MH_25 WAR HEAD ROBOT & FIRE FIGHTING ROBOT

CTC_MH_26 HEXA-BOT CONTROL X- BEE/ZIG-BEE REMOTE [with front end]

College to Corporate Service HYD | RJY |TPGUDEM Page 15

CTC_MH_27 PC BASED WALKING ROBOT THROUGH X- BEE/ZIG-BEE

CTC_MH_28 WALKING ROBOT CONTROL X- BEE/ZIG-BEE REMOTE

CTC_MH_29 REAL TIME CAR PARKING SYSTEM USING MICROCONTROLLER [with front end]

COMBINATIONS

This category hold different projects based on application rather than based on technology, so it can be defined as projects with different technologies, like GSM,GPS,ZIGBEE,RFID,GPRS etc… projects which fall under this list will be very near to real time applications as it is not based on technology but it is based on requirement and analysis.

CTC_CM_01 GPS BASED BORDER ALERT SYSTEM FOR FISHERMEN WITH BOAT SPEEDOMETER

CTC_CM_02 AUTOMATIC POWER METER READING SYSTEM USING GSM NETWORK

CTC_CM_03 GSM AND RFID BASED INTELLIGENT COURIER MAILBOX SYSTEM WITH AUTOMATIC DELIVERY NOTIFICATION

CTC_CM_04 GPS AND GSM BASED OFFICE CAB MONITORING, ALERTING AND LOGGING SYSTEM

CTC_CM_05 ACCIDENT IDENTIFICATION SYSTEM USING GSM AND GPS

CTC_CM_06 GSM BASED SCHOOL CHILDREN SECURITY SYSTEM BASED ON RFID

CTC_CM_07 SECURITY ACCESS CONTROL USING GPS AND GSM

CTC_CM_08 GSM AND GPS BASED LIVE HUMAN DETECTION WITH PIR SENSOR

CTC_CM_09 STUDENT COLLEGE ALERT SYSTEM TO PARENTS BY THEIR ENTRY AT THE

COLLEGE PREMISES BY USING RFID AND GSM SMS TECHNOLOGY

CTC_CM_10 EMPLOYEE LOG SYSTEM USING PC AND RFID

CTC_CM_11 RFID BASED BUS ANNOUNCEMTN SYSTEM USING APR9600

CTC_CM_12 MODERN RESTAURANTS ATOMIZATION FOR WIRELESS MENU DISH ORDERING

USING TOUCH PANEL AND ZIGBEE.

CTC_CM_13 TOUCH SCREEN AND ZIGBEE BASED WIRELESS COMMUNICATION ASSISTANT IN

AIRLINES

CTC_CM_14 TOUCH SCREEN BASED PC ACCESS

College to Corporate Service HYD | RJY |TPGUDEM Page 16

ADVANCED PROJECTS

BLUETOOTH BASED

Blue tooth is a open wireless technology standard for exchanging data over short distances from fixed and mobile devices, creating personal area networks(PANs) with high levels of security. It is operated with the range 2400–2480 MHz . In these projects we connect Bluetooth dongle to PC and connect Bluetooth modem to project. By using this we can control all passive devices like motor control, relays, motors, home appliances, industrial appliances etc…

CTC_BT_01 BLUETOOTH ROBOT WITH CMOS IMAGE SENSOR (SPY ROBOT)

CTC_BT_02 REMOTE CONTROLLED HOME AUTOMATION USING BLUETOOTH

CTC_BT_03 BLUETOOTH BASED INDUSTRIAL DATA ACQUISITION SYSTEM

CTC_BT_04 INDUSTRIAL DEVICES CONTROLLING SYSTEM USING BLUETOOTH

TOUCH SCREEN BASED

A touch screen is an electronic visual display that can detect the presence and location of a touch within the display area. The term generally refers to touching the display of the device with a finger or hand. Touch screens can also sense other passive objects, such as a stylus. Touch screens are common in devices such as game consoles, all-in-one computers, tablet computers, and smart phones. Such displays can be attached to computers, or to networks as terminals. They also play a prominent role in the design of digital appliances such as the personal digital assistant (PDA), satellite navigation devices, mobile phones, and video games. In our project we are interfacing serial protocol based touch screen with the micro controller and perform various operations.

CTC_TS_01 TOUCH BASED INDUSTRIL MOTORS/ HIGH VOLTAGE DEVICES CONTROL

CTC_TS_02 TOUCH BASED HOME AUTOMATION

CTC_TS_03 ROBO CONTROL

CTC_TS_04 REALTIME ATM ACCESS

College to Corporate Service HYD | RJY |TPGUDEM Page 17

THERMAL PRINTER BASED PROJECTS

Thermal printing (or direct thermal printing) is a digital printing process which produces a printed image by selectively heating coated thermo chromic paper, or thermal paper as it is commonly known, when the paper passes over the thermal print head. We can see this technology in real time embedded products like e-billing, ticket vending machines, ECG printing, electricity bills, e- challans and few other GPRS server based products etc.,. Thermal printer operates on some set of commands. By using this, any type of text data we feed can be printed on to a special paper. These printers are very portable but complicated in design. All below projects are based on real time applications.

CTC_TP_01 THERMAL PRINTER INTEGRATION USING MICROCONTROLLER

CTC_TP_02 HAND HELD GADGET USING THERMAL PRINTER PROVISION

CTC_TP_03 MOBILE MESSAGE PRINTING SYSTEM USINGTHERMAL PRINTER

CTC_TP_04 AUTOMATIC ELECTRICAL BILLING SYSTEM TO WEBSERVER USING GPRS COMMUNICATION (HTTP AND TCP/IP PROTOCALS)

CTC_TP_05 TOLL GATE TICKETING SYSTEM TO WEBSERVER USING GPRS COMMUNICATION (HTTP AND TCP/IP PROTOCALS)

CTC_TP_06 MINIG SECURITY DATA REPORTING TO WEBSERVER USING GPRS COMMUNICATION (HTTP AND TCP/IP PROTOCALS)

CTC_TP_07 VEHICLE PARKING TICKETING SYSTEM TO WEB SERVER USING GPRS COMMUNICATION (HTTP AND TCP/IP PROTOCALS)

CTC_TP_08 RTC TICKETING SYSTEM USING GPRS COMMUNICATION (HTTP AND TCP/IP PROTOCALS)

CTC_TP_09 SENSORS DATA LOGGER SYSTEM USING GPRS COMMUNICATION (HTTP AND TCP/IP PROTOCALS)

CTC_TP_10 E-PAYMENT FOR HOME AND COMMERCIAL NEEDS GPRS COMMUNICATION (HTTP AND TCP/IP PROTOCALS)

GPRS/EMBEDDED NETWROKING BASED PROJECTS

GPRS is a general packet radio service. By using this we can update any type of data to server. GPRS provides data rates of 56–114 kbps. These servers are TCP/IP, UDP, SMTP etc., we have to communicate internet HTTP 1.1 protocol with GPRS modem. Vehicle Tracking Systems, Data loggers, Hand Held device etc… run on this technology. This is the heart of Embedded Networking real time applications.

CTC_NW_01 DATA TRASFERING FROM MICROCONTROLER TO SERVER USING GPRS COMMUNICATION (HTTP AND TCP/IP PROTOCALS)

CTC_NW_02 HOME SECURITY MONITORING THROUGH WEBSERVE USING GPRS COMMUNICATION (HTTP AND TCP/IP PROTOCALS)

CTC_NW_03 WEATHER MONITORING SYSTEM IN REMOTE PLACES USING GSM (HTTP AND TCP/IP PROTOCALS)

College to Corporate Service HYD | RJY |TPGUDEM Page 18

CTC_NW_04 AUTOMATIC ELECTRICAL BILLING SYSTEM TO WEBSERVER USING GPRS COMMUNICATION (HTTP AND TCP/IP PROTOCALS)

CTC_NW_05 TOLL GATE TICKETING SYSTEM TO WEBSERVER USING GPRS COMMUNICATION (HTTP AND TCP/IP PROTOCALS)

CTC_NW_06 MINIG SECURITY DATA REPORTING TO WEBSERVER USING GPRS COMMUNICATION (HTTP AND TCP/IP PROTOCALS)

CTC_NW_07 VEHICLE PARKING MANAGEMENT SYSTEM TO WEB SERVER USING GPRS COMMUNICATION (HTTP AND TCP/IP PROTOCALS)

CTC_NW_08 RTC TICKETING SYSTEM USING GPRS COMMUNICATION (HTTP AND TCP/IP PROTOCALS)

CTC_NW_09 SENSORS DATA LOGGER SYSTEM USING GPRS COMMUNICATION (HTTP AND TCP/IP PROTOCALS)

CTC_NW_10 E-PAYMENT FOR HOME AND COMMERCIAL NEEDS GPRS COMMUNICATION (HTTP AND TCP/IP PROTOCALS)

CTC_NW_11 REAL TIMEAUTOMATIC METER READING THROUGH GPRS COMMUNICATION (HTTP AND TCP/IP PROTOCALS)

CTC_NW_12 REAL TIME STREET LIGHTS MONITORING SYSTEM THROUGH GPRS COMMUNICATION(HTTP AND TCP/IP PROTOCALS)

CTC_NW_13 HOSPITAL MANAGEMENT SYSTEM THROUGH GPRS COMMUNICATION(HTTP AND TCP/IP PROTOCALS)

CTC_NW_14 STUDENT/EMPLOYEE ATTENDANCE SYSTEM THROUGH GPRS COMMUNICATION(HTTP AND TCP/IP PROTOCALS)

CTC_NW_15 REAL TIME ROBO FUNCTIONAL MONITORING THROUGH GPRS COMMUNICATION(HTTP AND TCP/IP PROTOCALS)

EMBEDDED ELECTRICAL

This category hold different projects based on application rather than based on technology, so it can be defined as projects with different technologies includes electrical concepts like AC motors, High voltage operations, Solar chargers, feedback controls etc., … projects which fall under this list will be very near to real time applications as it is not based on technology but it is based on requirement and analysis.

CTC_EL_01 BATTERY ENERGY STORAGE FOR ENABLING INTEGRATION OF DISTRIBUTED SOLAR POWER GENERATION

CTC_EL_02 SMART SOLAR HOME SYSTEM WITH SAFETY DEVICE LOW AND HIGH VOLATAGE ALERT CTC_EL_03 HYBRID OPTOELECTRONIC SENSOR FOR CURRENT AND TEMPERATURE MONITORING ON TRNSMISSION LINES CTC_EL_04 LOW COST SOLAR ECG WITH WIRELESS TRANSMISSION(ZIGBEE OR BLUETOOTH OR GSM)

College to Corporate Service HYD | RJY |TPGUDEM Page 19

CTC_EL_05 ENERGY MONITORING SYSTEM USING SENSOR NETWORKS IN RESIDENTIAL HOUSES CTC_EL_06 VOICE OPERATED INDUCTION MOTOR SPEED CONTROL THROUGH RF COMMUNICATION CTC_EL_07 TRANSFORMER INDUSTRIAL PARAMETERS FAULT IDENTIFICATION AND INTIMATE TO EB SECTION CTC_EL_08 ENERGY METER MONITORING AND CONTROL SYSTEM USING SMS TECHNOLOGY CTC_EL_09 SPEED CONTROL OF INDUCTION MOTOR USING TOUCH SCREEN CTC_EL_10 CONTACTLESS DIGITAL TACHOMETER USING IR CTC_EL_11 MICROCONTROLLER BASED MULTIPLE DEVICE CONTROL BASED ON CHANGE IN INPUT FREQUENCY (FREQUENCY THROUGH PC AUDIO OUT) CTC_ EL_12 FREQUENCY METER FOR DIGITAL SIGNALS USING MICROCONTROLLER CTC_EL_13 UNIFIED POWER FACTOR CONTROL (UPFC) USING MICROCONTROLLER

CTC_EL_14 WIRELESS POWER TRANMISSION THROUGH MICROCONTROLLER

CTC_EL_15 SOLAR TRACKING SYSTEM

CTC_EL_16 SOLAR POWER BASED INDUSTRIAL BOILER CONTROLLER WITH TEMPERATURE DISPLAY

CTC_EL_17 ULTRA FAST ACTING ELECTRONIC CIRCUIT BRAKER

EMBEDDED POWER ELECTRONICS

This category holds different projects based on combination of power systems and electronics. Power electronics is the application of solid-state electronics for the control and conversion of electric power. It also refers to a subject of research in electronic and electrical engineering which deals with design, control, computation and integration of nonlinear, time varying energy processing electronic systems with fast dynamics.

CTC_PE_01 THYRISTER POWER CONTROL BY REMOTE

CTC_PE_02 DUAL CONVERTER USING THYRISTERS

CTC_PE_03 PROGRAMMBLE POWER CONTROL

CTC_PE_04 SINE PULSE WIDTH MODULATION USING MICROCONTOLLER

CTC_PE_05 CYCLO CONVERTER USING THYRISTER

CTC_PE_06 RF BASED HOME AUTOMATION SYSTEM

College to Corporate Service HYD | RJY |TPGUDEM Page 20

CTC_PE_07 UPFC (TRAIL AFTER CONFIRM)

CTC_PE_08 FACTS (FLEXIBLE AC TRANSMISSION) BY TSR CTC_PE_09 SVPWM SPACE VECTOR PULSE WIDTH MODULATION CTC_PE_10 REMOTE AC POWER CONTROL BY ANDROID APPLICATION

EMBEDDED MATLAB

Embedded matlab includes the High-end applications with different technologies. These embedded matlab applications are collaboration of embedded systems and matlab are mostly used in real time applications like navy, robotic applications.

CTC_EM_01 MATLAB BASED INTRUDER DETECTION AND SHOOTING ROBOT

CTC_EM_02 MULTIPLE TARGET TRACKING FOR INTELLIGENT HEADLIGHTS CONTROL

CTC_EM_03 MP3 PLAYER CONTROL THROUGH GESTURE

CTC_EM_04 AUTOMATIC DETECTION AND RECOGNISATION OF ROAD SIGN FOR DRIVER ASSISTANCE SYSTEM

CTC_EM_05 REAL TIME IMITATIVE ROBOTIC ARM CONTROL FOR HOME ROBOT APPLICATION

CTC_EM_06 EYE TRACKING BASED DRIVER FATIGUE MONITORING AND WARNING SYSTEM

CTC_EM_07 REALTIME CONTROL OF DC MOTOR DRIVE USING SPEECH RECOGNISATION

CTC_EM_08 MATLAB BASED SPEECH CONTROL HOME APPLIANCES (EXTRA)

CTC_EM_09 MATLAB BASED WIRELESS ROBOT CONTROL (EXTRA)

CTC_EM_10 IMAGE PROCESSING BASED AUTOMATIC MONEY DEPOSITOR