Emerson Flow Control Valves

FLOW CONTROLS

SUBJECT INDEX

Burnaby 604.298.4472 Interior BC 604.202.4853 Vancouver Island 604.282.0118 Calgary 403.214.2134 Edmonton 780.451.4744 Saskatchewan 306.373.9227Kitchener 519.748.0961 St.Catharines 905.988.1724 Windsor 519.251.9925 North Bay 780.476.0800 Ottawa 613.742.0083 www.isc.tv

Page #D

Driers.............................................................................................................17-22E

Electronic Control Valves..................................................................................9-16Expansion Valves................................................................................................1-8

FFilter Cores...........................................................................................................20Filter Driers......................................................................................................17-22 Bi-Flo................................................................................................................18 Liquid Line........................................................................................................17 Suction Line.................................................................................................18-19 Suction or Liquid Line Take Apart Shells.....................................................20-22

HHead Pressure Controls..................................................................................26-28

MMoisture-Liquid Indicators...............................................................................23-24

OOil Filter Drier........................................................................................................23Oil Level Regulator.........................................................................................22-23

RRegulators..................................................................................................28-34 Constant Pressure............................................................................................34 Electronic Stepper.............................................................................................28 Hot Gas Bypass................................................................................................29 Inlet Pressure..............................................................................................29-30 Outlet Pressure...........................................................................................30-33

SSolenoid Valves...............................................................................................24-26

TThermostatic Expansion Valves..........................................................................1-8

VValves Electronic Control..........................................................................................9-16 Head Pressure Control................................................................................26-28 Oil Control....................................................................................................22-23 Solenoid..................................................................................................24-26 Thermostatic Expansion..................................................................................1-8


1

R22 / R407COrder Number Nominal Capacity (tons) Equalizer Type Refrigerant Charge Valve Connections (in)AFA1/4HC 1/4 Internal HC 1/4 x 1/2 SAE AFA1/2HC 1/2 Internal HC 1/4 x 1/2 SAE AFAE1/2HC 1/2 External HC 1/4 x 1/2 SAE AFAE1HW 1 External HW 3/8 x 1/2 SAE AFAE1-1/2HC 1 1/2 External HC 3/8 x 1/2 SAE AFAE2HC 2 External HC 3/8 x 1/2 SAE

R404A / R507 / R502 / R402AOrder Number Nominal Capacity (tons) Equalizer Type Refrigerant Charge Valve Connections (in)AFA1/4RC 1/4 Internal RC 1/4 x 1/2 SAE AFA1/4RZ 1/4 Internal RZ 1/4 x 1/2 SAE AFAE1/4RC 1/4 External RC 1/4 x 1/2 SAE AFAE1/4RZ 1/4 External RZ 1/4 x 1/2 SAE AFA1/2RC 1/2 Internal RC 1/4 x 1/2 SAE AFAE1/2RC 1/2 External RC 1/4 x 1/2 SAE AFAE1/2RZ 1/2 External RZ 1/4 x 1/2 SAE AFAE1/2RW35 1/2 External RW35 3/8 x 1/2 SAE AFA1RC 1 Internal RC 3/8 x 1/2 SAE AFA1RZ 1 Internal RZ 3/8 x 1/2 SAE AFAE1RC 1 External RC 3/8 x 1/2 SAE AFAE1RZ 1 External RZ 3/8 x 1/2 SAE AFAE1RW45 1 External RW45 3/8 x 1/2 SAE AFAE1-1/2RC 1 1/2 External RC 3/8 x 1/2 SAE AFAE2RC 2 External RC 3/8 x 1/2 SAE

R134A Order Number Nominal Capacity (tons) Equalizer Type Refrigerant Charge Valve Connections (in)AFA1/4MC 1/4 Internal MC 1/4 x 1/2 SAE AFAE1/4MC 1/4 External MC 1/4 x 1/2 SAE AFA1/2MC 1/2 Internal MC 1/4 x 1/2 SAE AFAE1/2MC 1/2 External MC 1/4 x 1/2 SAE AFA1MC 1 Internal MC 3/8 x 1/2 SAE AFAE1MC 1 External MC 3/8 x 1/2 SAE Note: Nominal capacities are based on 40°F evaporator temperature and 100°F vapour free liquid refrigerant entering the valve.Refrigerant Code Charge CodeF = R12 C = medium tempH = R22 CA = heat pumpM = R134A W(MOP) = press. limiting*P = R507 Z = low temp*R = R502 * P, R and S *S = R404A are interchangeableZ = R410A

EMERSON FLOW CONTROLS TX VALVESAFA SERIES THERMO® TAKE APART STYLE EXPANSION VALVES

R12 / R401AOrder Number Nominal Capacity (tons) Equalizer Type Refrigerant Charge Valve Connections (in)AFA1/4FC 1/4 Internal FC 1/4 x 1/2 SAE AFAE1/4FC 1/4 External FC 1/4 x 1/2 SAE AFA1/2FC 1/2 Internal FC 1/4 x 1/2 SAE AFAE1/2FC 1/2 External FC 1/4 x 1/2 SAE AFA1FC 1 Internal FC 3/8 x 1/2 SAE AFAE1FC 1 External FC 3/8 x 1/2 SAE AFAE1-1/2FC 1 1/2 External FC 3/8 x 1/2 SAE AFAE2FC 2 External FC 3/8 x 1/2 SAE

Designed for commercial refrigeration applications requiring compact size combined with stable and accurate control over wide load and evaporator temperature ranges.

Burnaby 604.298.4472 Interior BC 604.202.4853 Vancouver Island 604.282.0118 Calgary 403.214.2134 Edmonton 780.451.4744 Saskatchewan 306.373.9227Kitchener 519.748.0961 St.Catharines 905.988.1724 Windsor 519.251.9925 North Bay 780.476.0800 Ottawa 613.742.0083 www.isc.tv2

Order Number Nominal Capacity (tons) Equalizer Type Refrigerant Charge Valve Connections (in)BAEB1/2ZW155 1/2 External ZW155 3/8 x 1/2 SAE BAEB1ZW155 1 External ZW155 3/8 x 1/2 SAE BAEB11/2ZW155 1 1/2 External ZW155 3/8 x 1/2 SAE BAEB2ZW155 2 External ZW155 3/8 x 1/2 SAE BAEB3ZW155 3 External ZW155 3/8 x 1/2 SAE BAEB31/2ZW155 3 1/2 External ZW155 3/8 x 1/2 SAEBAEB41/2ZW155 4 1/2 External ZW155 3/8 x 1/2 SAE BAEB6ZW155 6 External ZW155 3/8 x 1/2 SAE BAEB7ZW155 7 External ZW155 3/8 x 1/2 SAE

R410A (MOP 155)

Order Number Nominal Capacity (tons) Equalizer Type Refrigerant Charge Valve Connections (in)BAEB1/2HCA 1/2 External HCA 3/8 x 1/2 SAE BAEB1HCA 1 External HCA 3/8 x 1/2 SAE BAEB11/2HCA 1 1/2 External HCA 3/8 x 1/2 SAE BAEB2HCA 2 External HCA 3/8 x 1/2 SAE BAEB21/2HCA 2 1/2 External HCA 3/8 x 1/2 SAE BAEB3HCA 3 External HCA 3/8 x 1/2 SAE BAEB4HCA 4 External HCA 3/8 x 1/2 SAE BAEB5HCA 5 External HCA 3/8 x 1/2 SAE BAEB6HCA 6 External HCA 3/8 x 1/2 SAE

R22 / R407C

EMERSON FLOW CONTROLS TX VALVESBA THERMO EXPANSION VALVESBA(E)/BN(E) Series Thermo Expansion Valves featuring balanced port construction are used for Bi-Flow applications. BA/BN valves provide stable and accurate control over a wide range of operating conditions.


3

R134 MEDIUM TEMPERATURE -20 TO 50°FOrder Number Capacity (tons) Equalizer Type Valve Connections (in)HF1/4MC 1/4 Internal 3/8 x 1/2 SAE HFE1/4MC 1/4 External 3/8 x 1/2 SAE HF1/2MC 1/2 Internal 3/8 x 1/2 SAE HFE1/2MC 1/2 External 3/8 x 1/2 SAE HFESC3/4MC 3/4 External 3/8 x 1/2 ODF HFE1MC 1 External 3/8 x 1/2 SAE HFE11/2MC 1 1/2 External 3/8 x 1/2 SAE HFESC1-1/2MC 1 1/2 External 3/8 x 1/2 ODF HFESC1-3/4MC 1 3/4 External 3/8 x 1/2 ODF HFE21/2MC 2 1/2 External 3/8 x 1/2 SAE HFE4MC 4 External 3/8 x 1/2 SAE

R22 / R407COrder Number Capacity (tons) Equalizer Type Valve Connections (in) Refrigerant Charge HF1/4HC 1/4 Internal 3/8 x 1/2 SAE C, medium temperature (-20°F - 50°F) HFE1/4HC 1/4 External 3/8 x 1/2 SAE C, medium temperature (-20°F - 50°F) HFESC1/4HC 1/4 External 3/8 x 1/2 ODF C, medium temperature (-20°F - 50°F) HF1/4HZ 1/4 Internal 3/8 x 1/2 SAE Z, low temperature (-50°F - 10°F) HF1/2HC 1/2 Internal 3/8 x 1/2 SAE C, medium temperature (-20°F - 50°F) HFE1/2HC 1/2 External 3/8 x 1/2 SAE C, medium temperature (-20°F - 50°F) HFESC1/2HC 1/2 External 3/8 x 1/2 ODF C, medium temperature (-20°F - 50°F) HFE1/2HZ 1/2 External 3/8 x 1/2 SAE Z, low temperature (-50°F - 10°F) HFE1/2HW35 1/2 External 3/8 x 1/2 SAE W35, low temperature mop (-50°F - 0°F) HF1HC 1 Internal 3/8 x 1/2 SAE C, medium temperature (-20°F - 50°F) HFE1HC 1 External 3/8 x 1/2 SAE C, medium temperature (-20°F - 50°F) HFESC1HC 1 External 3/8 x 1/2 ODF C, medium temperature (-20°F - 50°F) HFE1HZ 1 External 3/8 x 1/2 SAE Z, low temperature (-50°F - 10°F) HFE1HW35 1 External 3/8 x 1/2 SAE W35, low temperature mop (-50°F - 0°F) HF11/2HC 1 1/2 Internal 3/8 x 1/2 SAE C, medium temperature (-20°F - 50°F) HFE11/2HC 1 1/2 External 3/8 x 1/2 SAE C, medium temperature (-20°F - 50°F) HFESC11/2HC 1 1/2 External 3/8 x 1/2 ODF C, medium temperature (-20°F - 50°F)

EMERSON FLOW CONTROLS TX VALVESHF SERIES THERMO® EXPANSION VALVES

R12 / R401 MEDIUM TEMPERATURE -20 TO 50°FOrder Number Capacity (tons) Equalizer Type Valve Connections (in)HF1/4FC 1/4 Internal 3/8 x 1/2 SAEHFE1/4FC 1/4 External 3/8 x 1/2 SAEHF1/2FC 1/2 Internal 3/8 x 1/2 SAEHFE1/2FC 1/2 External 3/8 x 1/2 SAEHFESC1/2FC 1/2 External 3/8 x 1/2 ODFHF1FC 1 Internal 3/8 x 1/2 SAEHFE1FC 1 External 3/8 x 1/2 SAE HFESC1FC 1 External 3/8 x 1/2 ODF HF11/2FC 1 1/2 Internal 3/8 x 1/2 SAE HFE11/2FC 1 1/2 External 3/8 x 1/2 SAE HFESC11/2FC 1 1/2 External 3/8 x 1/2 ODF HF2FC 2 Internal 3/8 x 1/2 SAE HFE2FC 2 External 3/8 x 1/2 SAE HFESC2FC 2 External 3/8 x 1/2 ODF S/T HFE31/2FC 3 1/2 External 3/8 x 1/2 SAE HFESC31/2FC 3 1/2 External 3/8 x 1/2 ODF S/T

Small capacity balanced ported expansion valves for precise superheat control on systems designed to operate with floating heat pressures and varying evaporator loads. Large H-size power elements provide longer life and smoother, more consistent valve control over a wide range of operating conditions. Wide load range characteristics. Features include: tailored bulb charges for specific temperature ranges; forged brass body-SAE connections; bar-stock brass body-ODF connections; replaceable power assembly; replaceable inlet filter; internal/external equalizer; field-proven internal seal construction; is interchangeable with currently available commercial refrigeration TEV’s.

table continued next page


R404A / R507 / R502 / R402Order Number Capacity (tons) Equalizer Type Valve Connections (in) Refrigerant ChargeHF1/4RC 1/4 Internal 3/8 x 1/2 SAE C, medium temperature (-20°F - 50°F) HFE1/4RC 1/4 External 3/8 x 1/2 SAE C, medium temperature (-20°F - 50°F) HFESC1/4RC 1/4 External 3/8 x 1/2 ODF C, medium temperature (-20°F - 50°F) HF1/4RZ 1/4 Internal 3/8 x 1/2 SAE Z, low temperature (-50°F - 10°F) HFE1/4RZ 1/4 External 3/8 x 1/2 SAE Z, low temperature (-50°F - 10°F) HFESC1/4RZ 1/4 External 3/8 x 1/2 ODF Z, low temperature (-50°F - 10°F) HF1/4RW45 1/4 Internal 3/8 x 1/2 SAE W45, low temperature mop (-50°F - 0°F) HFESC1/4RW45 1/4 External 3/8 x 1/2 ODF W45, low temperature mop (-50°F - 0°F) HF1/2RC 1/2 Internal 3/8 x 1/2 SAE C, medium temperature (-20°F - 50°F) HFE1/2RC 1/2 External 3/8 x 1/2 SAE C, medium temperature (-20°F - 50°F) HFESC1/2RC 1/2 External 3/8 x 1/2 ODF C, medium temperature (-20°F - 50°F) HF1/2RZ 1/2 Internal 3/8 x 1/2 SAE Z, low temperature (-50°F - 10°F) HFE1/2RZ 1/2 External 3/8 x 1/2 SAE Z, low temperature (-50°F - 10°F) HFESC1/2RZ 1/2 External 3/8 x 1/2 ODF Z, low temperature (-50°F - 10°F) HF1/2RW45 1/2 Internal 3/8 x 1/2 SAE W45, low temperature mop (-50°F - 0°F) HFESC1/2RW45 1/2 External 3/8 x 1/2 ODF W45, low temperature mop (-50°F - 0°F) HFE1/2RW45 1/2 External 3/8 x 1/2 SAE W45, low temperature mop (-50°F - 0°F) HF1RC 1 Internal 3/8 x 1/2 SAE C, medium temperature (-20°F - 50°F) HFE1RC 1 External 3/8 x 1/2 SAE C, medium temperature (-20°F - 50°F) HFESC1RC 1 External 3/8 x 1/2 ODF C, medium temperature (-20°F - 50°F) HF1RZ 1 Internal 3/8 x 1/2 SAE Z, low temperature (-50°F - 10°F) HFE1RZ 1 External 3/8 x 1/2 SAE Z, low temperature (-50°F - 10°F) HFE1RW45 1 External 3/8 x 1/2 SAE W45, low temperature mop (-50°F - 0°F) HFESC1RW45 1 External 3/8 x 1/2 ODF W45, low temperature mop (-50°F - 0°F) HFE11/2RC 1 1/2 External 3/8 x 1/2 SAE C, medium temperature (-20°F - 50°F) HFESC11/2RC 1 1/2 External 3/8 x 1/2 ODF C, medium temperature (-20°F - 50°F) HFE11/2RZ 1 1/2 External 3/8 x 1/2 SAE Z, low temperature (-50°F - 10°F) HFESC1-1/2RZ 1 1/2 External 3/8 x 1/2 ODF Z, low temperature (-50°F - 10°F) HFE11/2RW45 1 1/2 External 3/8 x 1/2 SAE W45, low temperature mop (-50°F - 0°F) HFESC1-1/2RW45 1 1/2 External 3/8 x 1/2 ODF W45, low temperature mop (-50°F - 0°F) HF2RC 2 Internal 3/8 x 1/2 SAE C, medium temperature (-20°F - 50°F) HFE2RC 2 External 3/8 x 1/2 SAE C, medium temperature (-20°F - 50°F) HFESC2RC 2 External 3/8 x 1/2 ODF C, medium temperature (-20°F - 50°F) HF2RZ 2 Internal 3/8 x 1/2 SAE Z, low temperature (-50°F - 10°F) HFE2RZ 2 External 3/8 x 1/2 SAE Z, low temperature (-50°F - 10°F) HFESC2RZ 2 External 3/8 x 1/2 ODF -HFE2RW45 2 External 3/8 x 1/2 SAE W45, low temperature mop (-50°F - 0°F) HFESC2RW45 2 External 3/8 x 1/2 ODF W45, low temperature mop (-50°F - 0°F) HFE31/2RZ 3 1/2 External 3/8 x 1/2 SAE Z, low temperature (-50°F - 10°F) HFE31/2RC 3 1/2 External 3/8 x 1/2 SAE C, medium temperature (-20°F - 50°F) HFESC31/2RC 3 1/2 External 3/8 x 1/2 ODF C, medium temperature (-20°F - 50°F) HFESC3-1/2RZ 3 1/2 External 3/8 x 1/2 ODF Z, low temperature (-50°F - 10°F) HFESC5RC 5 External 3/8 x 1/2 ODF C, medium temperature (-20°F - 50°F) HFE31/2RW45 3 1/2 External 3/8 x 1/2 SAE W45, low temperature mop (-50°F - 0°F)

Order Number Capacity (tons) Equalizer Type Valve Connections (in) Refrigerant ChargeHFE11/2HZ 1 1/2 External 3/8 x 1/2 SAE Z, low temperature (-50°F - 10°F) HFE11/2HW35 1 1/2 External 3/8 x 1/2 SAE W35, low temperature mop (-50°F - 0°F) HF2HC 2 Internal 3/8 x 1/2 SAE C, medium temperature (-20°F - 50°F) HFE2HC 2 External 3/8 x 1/2 SAE C, medium temperature (-20°F - 50°F) HFESC2HC 2 External 3/8 x 1/2 ODF C, medium temperature (-20°F - 50°F) HFE2HZ 2 External 3/8 x 1/2 SAE Z, low temperature (-50°F - 10°F) HFE21/2HC 2 1/2 External 3/8 x 1/2 SAE C, medium temperature (-20°F - 50°F) HFESC21/2HC 2 1/2 External 3/8 x 1/2 ODF C, medium temperature (-20°F - 50°F) HFE3HC 3 External 3/8 x 1/2 SAE C, medium temperature (-20°F - 50°F) HFESC3HC 3 External 3/8 x 1/2 ODF C, medium temperature (-20°F - 50°F) HFE3HZ 3 External 3/8 x 1/2 SAE Z, low temperature (-50°F - 10°F) HFE3HW35 3 External 3/8 x 1/2 SAE W35, low temperature mop (-50°F - 0°F) HFE51/2HC 5 1/2 External 3/8 x 1/2 SAE C, medium temperature (-20°F - 50°F) HFESC51/2HC 5 1/2 External 3/8 x 1/2 ODF C, medium temperature (-20°F - 50°F)

EMERSON FLOW CONTROLS TX VALVESHF SERIES THERMO® EXPANSION VALVESR22 / R407C


5

R134 Order Number Capacity (tons) Equalizer Type Connections (in)TCLE3-1/2MC 3 1/2 1/4 SAE external 3/8 x 5/8 ODF TCLE7-1/2MC 71/2 1/4 SAE external 5/8 x 7/8 ODF TCLE9MC 9 1/4 SAE external 5/8 x 7/8 ODF TER19MC 19 1/4 SAE external 7/8 x 1 1/8 ODF

R22 / R407cOrder Number Capacity (tons) Equalizer Type Connections (in) Remote Bulb Tubing Length TCLE2HC 2 1/4 SAE external 3/8 x 5/8 ODF 5’ Standard TCLE3HC 3 1/4 SAE external 3/8 x 5/8 ODF 5’ Standard TCLE5HC 5 1/4 SAE external 5/8 x 7/8 ODF 5’ Standard TCLE71/2HC 7 1/2 1/4 SAE external 5/8 x 7/8 ODF 5’ Standard TCLE10HC 10 1/4 SAE external 5/8 x 7/8 ODF 5’ Standard TCLE12HW 12 1/4 SAE external 5/8 x 1 1/8 ODF 5’ Standard TJRE14HC 14 1/4 SAE external 7/8 ODF x 1 1/8 ODM 5’ Standard TJRE18HW 18 1/4 SAE external 7/8 ODF x 1 1/8 ODM 5’ Standard TER22HW 22 1/4 SAE external 7/8 ODF x 1 1/8 ODM 10’ Standard TER26HW 26 1/4 SAE external 7/8 ODF x 1 1/8 ODM 10’ Standard TER35HW 35 1/4 SAE external 7/8 ODF x 1 1/8 ODM 10’ Standard TER45HW 45 1/4 SAE external 7/8 ODF x 1 1/8 ODM 10’ Standard TIR55HW 55 1/4 SAE external 7/8 ODF x 1 1/8 ODF 10’ Standard THR75HC 75 1/4 SAE external 1 1/8 ODF x 1 1/8 ODF -

R404A / R507 / R502 / R402AOrder Number Capacity (tons) Equalizer Type Connections (in) Remote Bulb Tubing Length MOP TCLE1RC 1 1/4 SAE external 3/8 x 1 1/2 ODF 5’ Standard -TCLE2RC 2 1/4 SAE external 3/8 x 1/2 SAE 5’ Standard -TCLE2RZ 2 1/4 SAE external 3/8 x 1/2 ODF 5’ Standard -TCLE2RW35 2 1/4 SAE external 3/8 x 1/2 ODF - 35TCLE3RC 3 1/4 SAE external 3/8 x 5/8 ODF 5’ Standard -TCLE3RZ 3 1/4 SAE external 3/8 x 5/8 ODF 5’ Standard -TCLE41/2RC 4 1/2 1/4 SAE external 5/8 x 5/8 ODF 5’ Standard -TCLE4-1/2RW35 4 1/2 1/4 SAE external 5/8 x 5/8 ODF - 35TCLE4-1/2RZ 4 1/2 1/4 SAE external 5/8 x 5/8 ODF - -TCLE7RZ 7 1/4 SAE external 5/8 x 7/8 ODF 5’ Standard -TCLE8RC 8 1/4 SAE external 5/8 x 7/8 ODF 5’ Standard -TCLE8RZ 8 1/4 SAE external 5/8 x 7/8 ODF 5’ Standard -TJLE9RZ 9 1/4 SAE external 5/8 x 7/8 ODF - -TJRE12RZ 12 1/4 SAE external 7/8 ODF x 1 1/8 ODM 5’ Standard -TER14RZ 14 1/4 SAE external 7/8 x 1 1/8 ODF - -TER16RW 16 1/4 SAE external 7/8 ODF x 1 1/8 ODM 10’ Standard -TER16RZ 16 1/4 SAE external 7/8 x 1 1/8 ODF - -TER21RZ 21 1/4 SAE external 7/8 x 1 1/8 ODF - -TER21RW35 21 1/4 SAE external 7/8 x 1 1/8 ODF - 35

EMERSON FLOW CONTROLS TX VALVEST SERIES THERMOSTATIC EXPANSION VALVES

R12 / R401AOrder Number Capacity (tons) Equalizer Type Connections (in) Remote Bulb Tubing Length TCLE61/2FC 6 1/2 1/4 SAE external 5/8 x 7/8 ODF 5’ Standard TCLE3FC 3 1/4 SAE external 3/8 x 5/8 ODF 5’ Standard TCLE4FC 4 1/4 SAE external 1/2 x 5/8 ODF 5’ Standard

Adjustable superheat. Replaceable, interchangeable components. For original equipment and field replacements in air conditioning and refrigeration applications.

Note: Available for refrigerants R11, R113, R114, R152A, R600 and others. Models less valve flange, order separately.Note: Nominal capacities are based on 40°F evaporator temperature and 100°F vapour free liquid refrigerant entering the valve.Refrigerant Code Charge CodeF = R12 C = medium tempH = R22 CA = heat pumpM = R134A W(MOP) = press. limiting*P = R507 Z = low temp*R = R502 * P, R and S *S = R404A are interchangeableZ = R410A


R22 / R407CConnections (in)

Order Number* Capacity (tons) MOP Inlet Outlet TRAE+10HC 10 - 5/8 7/8TRAE+15HC 15 - 7/8 1 1/8TRAE+15HW100 15 100 7/8 1 1/8TRAE+20HC 20 - 7/8 1 1/8TRAE+20HW100 20 100 7/8 1 1/8TRAE+30HC 30 - 1 1/8 1 3/8TRAE+40HC 40 - 1 1/8 1 3/8TRAE+50HC 50 - 1 1/8 1 3/8TRAE+60HC 60 - 1 1/8 1 3/8TRAE70HW 70 - 1 1/8 1 3/8

For large capacity air conditioning, refrigeration and chiller applications where stable and accurate control, over wide load and evaporator temperature ranges, is required. R12, R22, R502 service. Balance, double-port design. External superheat adjustment 1/4” SAE external equalizer.

R402A / R404A / R502 / R507Connections (in)

Order Number* Capacity (tons) Inlet OutletTRAE+8RZ 8 5/8 7/8TRAE+12RZ 12 7/8 1 1/8TRAE+14RZ 14 7/8 1 1/8TRAE+20RZ 20 7/8 1 1/8TRAE+30RZ 30 7/8 1 1/8* “E” in valve type denotes external equalizer. Omit for internally equalized valves.Note: Nominal capacities are based on 40°F evaporator temperature and 100°F vapour free liquid refrigerant entering the valve.Note: + indicates valve has a replaceable power assembly and cage.

EMERSON FLOW CONTROLS TX VALVESTRAE SERIES THERMO® EXPANSION VALVES

CAGE ASSEMBLIES FOR T SERIES REFRIGERANT VALVESFOR USE WITH POWER ASSEMBLIES XB1019, X8019

Use With Valve ModelOrder Number R12 R22 R502 Equalizer TypeX22440-B1B TCL(E)1/4F TCL(E)1/2H TCL(E)1/4R External X22440-B2B TCL(E)1/2F TCL(E)1H TCL(E)1/2R External X22440-B3B TCL(E)1F TCL(E)2H TCL(E)1R External X22440-B4B TCL(E)2F TCL(E)3H TCL(E)2R External X22440-B5B TCL(E)3F TCL(E)5H TCL(E)3R External X22440-B6B TCL(E)4F TCL(E)7 1/2H TCL(E)4 1/2R External X22440-B7B TCL(E)6 1/2F TCL(E)10H TCL(E)7R External X22440-B8B TCL(E)7 1/2F TCL(E)12H TCL(E)8R External XC725-B4B TJLE800F TJLE1400H TJLE900R External X11873-B4B TJR8F TJR14H TJR9R External

Note: Nominal capacities are based on 40°F evaporator temperature and 100°F vapour free liquid refrigerant entering the valve.Refrigerant Code Charge CodeF = R12 C = medium tempH = R22 CA = heat pumpM = R134A W(MOP) = press. limiting*P = R507 Z = low temp*R = R502 * P, R and S *S = R404A are interchangeableZ = R410A


7

REPLACEMENT GASKETS AND WRENCHOrder Number Description E642 Packing nut wrench X13455-1 Gasket set for “T” series, CP, NTO, DP8, 10035, D1789, DT7410, 8769, 12997-1, 8443, CPGR5027, 5035, N935, 8591, 7838,

DT7634, 8931 series

Use With Valve ModelOrder Number R12 R22 R502 Equalizer TypeX9117-B6B TER13F TER22H TER14R External X9117-B7B TER15F TER26H TER16R External X9117-B8B TER20F TER35H TER21R External X9117-B9B TER25F TER45H TER27R External X9166-B10B TIR35F TIR55H TIR37R ExternalX9144-B11B THR45F THR75H THR48R ExternalX9144-B13B THR55F THR100H THR60R External

EMERSON FLOW CONTROLS TX VALVESCAGE ASSEMBLIES FOR T SERIES REFRIGERANT VALVESFOR USE WITH POWER ASSEMBLIES XC726, X7726

EMERSON FLOW CONTROLS DESUPERHEATING VALVELCL SERIES TAKE-A-PART DESUPERHEATING THERMO® VALVES

Order Number Equalizer Type LCL1A Internal LCLE1A ExternalLCL2A Internal LCLE2A ExternalLCL3A InternalLCLE3A ExternalLCL4A InternalLCLE4A External

Desuperheating (liquid injection) valve used in conjunction with hot gas bypass to prevent excessive suction line superheat.

Note: Refer to hot gas bypass tables in Flow Controls catalogue for valve sizing

POWER ASSEMBLIESSTANDARD BULB MODELS

Order Number Refrigerant Refrigerant Charge Capillary Tube Length (ft) Equalizer Type For Use With XB1019FC-1B R12 FC 5 1/4 SAE external TCL, TJL and TJR XB1019HC-1B R22 HC 5 1/4 SAE external TCL, TJL and TJR XB1019MC-1B R134A MC 5 1/4 SAE external TCL, TJL and TJR XB1019HC-2B R22 HC 10 1/4 SAE external TCL, TJL and TJR XB1019HW-4B R22 HW 20 1/4 SAE external TCL, TJL and TJR XB1019RC-1B R502 RC 5 1/4 SAE external TCL, TJL and TJR XB1019RW35-1B R502 RW35 5 1/4 SAE external TCL, TJL and TJR XB1019RWZ-1B R502 RZ 5 1/4 SAE external TCL, TJL and TJR XC726HC-2B R22 HW 10 1/4 SAE external TER, THR, TIR XC726RWZ-2B R502 RWZ 10 1/4 SAE external TER, TIR, THR, TMRXC726RC-2B R502 RC 10 1/4 SAE external TER, TIR, THR, TMRXC726MC-2B R134A MC 10 1/4 SAE external TER, TIR, THR, TMRXC726HC-2B R22 HC 10 1/4 SAE external TER, TIR, THR, TMRXC726HWZ-2B R22 HWZ 1/4 SAE external TER, TIR, THR, TMRXC726HW65-2B R22 HW 10 1/4 SAE external TER, TIR, THR, TMRXC726FC-3B R12 FC TER, TIR, THR, TMR

Consists of power assembly, gaskets and bulb clamps. Cap screws not included.

Not available with M.O.P. Not available for TG, ZZ, HC, HCE or RC valves.


EMERSON FLOW CONTROLS STEPPER TXVESVB BI-FLO STEPPER EXPANSION VALVESThe ESVB is a direct driven expansion valve that uses a stepper motor to actuate the valve pin. The stepper motor uses a voltage pulse to move the valve either open or closed, one step with each pulse. The ESVB has the ability to be interfaced with a variety of control electronics. The ESVB is useful in a variety of applications ranging from case control to subcooler applications, truck/trailer refrigeration, and heat pump/air conditioning applications.FEATURES• Hermetic construction eliminates external leakage• Bi-Flo capability allows one valve to control the superheat in both cooling and heating modes for heat pump applications• Stepper motor moves in discrete “steps” allowing for precise digital control• Voltage is required only when moving the valve increasing energy efficiency• Removable external connector for easy replacement• Contains internal strainer in both the inlet and outlet connections to protect the valve from contamination in both forward and reverse flow modes• Solenoid-tight shut-off eliminates the need for both a traditional TEV and a solenoid valve in the liquid line• Stainless steel housing minimizes corrosion over the life of the valve• 2-phase bi-polar, linear actuating stepper motor, direct drive• Two motors available 24 volt or 12 volt alternating square wave (see stepper sequence table)SPECIFICATIONS• UL file number MP604, CSA file number LR3204• MOPD: 300 psid, either flow direction• Maximum Working Pressure: 500 psi• Operating Temperatures: Ambient -40°F to 150°F Refrigerant -40°F to 140°F• Shipping Weight: 2 lbs• Motor drive voltage (12VDC or 24VDC) must be within +10% and -15% thru step

MOTOR SPECIFICATIONSFEATURE ESVB-1, -4 ESVB-10, -20COIL RESISTANCE (± 10%) 84 � at 25°C (12V) 336 � at 25°C (24V) 29 � at 25°C (12V) 116 � at 25°C (24V)INDUCTANCE (± 20%) 55 mH per winding 52 mH per windingSTEP RATE (± 20%) 50 steps/second 50 steps/second# steps from full open to full closed 384 steps 800 stepsHYSTERESIS (steps) 0 0LINEAR TRAVEL / STEP .001 inch .001 inchPOWER INPUT (nominal) 1.7 watts per phase (3.4 watts total) 5 watts per phase (10 watts nominal)

NOMENCLATURE EXAMPLE: ESV 1 24v 3/8 x 3/8 ODF ANG NC

ESVB 1 24 3/8 x 3/8 ODF ANG NCBiPolar Stepper Driven

Nominal Capacity141020

Motor Voltage 12V or 24V1

Side Fitting Size x Bottom Fitting Size3/8 x 3/83/8 x 1/21/2 x 1/2

7/8 x 1 3/8

Fitting Type ODF

Body ANG = Angle

Style

Connector NC = No Connector (must order connector

separately)ORDERING INFORMATION FOR ESVB VALVESESVB 1 12V 3/8 X 3/8 ODF ANG NCESVB 1 12V 3/8 X 1/2 ODF ANG NC BKESVB 1 24V 3/8 X 3/8 ODF ANG NCESVB 1 24V 3/8 X 1/2 ODF ANG NC BKESVB 4 12V 3/8 X 3/8 ODF ANG NCESVB 4 12V 3/8 X 1/2 ODF ANG NC BKESVB 4 24V 3/8 X 3/8 ODF ANG NCESVB 4 24V 3/8 X 1/2 ODF ANG NC BKESVB 10 24V 3/8 X 3/8 ODF ANG NCESVB 10 24V 3/8 X 1/2 ODF ANG NC BKESVB 20 24V 3/8 X 3/8 ODF ANG NCESVB 20 24V 3/8 X 1/2 ODF ANG NC BKEXTERNAL CONNECTOR, 4 WIRE, 5 FT.EXTERNAL CONNECTOR, 4 WIRE, 22 FT.

ESVB NOMINAL CAPACITY RANGES IN TONSVALVE R12 @60 PSI ▲P R134A @60 PSI ▲P R22 @60 PSI ▲PESVB-1ESVB-4ESVB-10ESVB-20

0.412.006.00

13.00

0.512.457.38

16.00

0.703.36

10.0821.86

VALVE R407C @100 PSI ▲P R404A/R507 @100 PSI ▲P R502 @100 PSI ▲PESVB-1ESVB-4ESVB-10ESVB-20

0.673.199.60

20.82

0.502.437.29

15.83

0.452.176.52

14.14


9

94

EC3 STAND-ALONE SUPERHEAT CONTROLLERS

Adjustability of operating parameters such as superheat and MOPSuitable for several different refrigerants such as R22, R124, R134a, R404A, R407C, R507, R410A and R744 (subcritical).Drives EX4, EX5, EX6, EX7 and EX8Fed-through signal from a connected pressure transmitter may be connected to any other third party controller to avoid use of additional costly pressure transmitter.Intelligent alarm management to protect compressor as well as fail safe operationIntegral UPS (Uniterrupted Power Supply) eliminates need for any external battery or UPSSetting and readout via Display/Keypad unit ECD-002DIN rail mounted housing

••

••

•

•

••

FEATURES AND SPECIFICATIONS

The EC3-X33 controller is for the EX-4 through 8 electronic control valves. The controller can be applied in a majority of applica-tions of air conditioning and refrigeration such as chillers, industrial process cooling, rooftops, heat pumps, package unit, close control, cold room, food process, air handling units, air cooler and air driers.

ECD-002

EC3-X33

Uses an interated web page for parameter setup, data monitoring and loggingCapabile of sending alarms via email communication

•

•

ADDITIONAL FEATURES AND SPECIFICATIONS ON EC3-X32Wiring for EC3-X33

Typical Ordering Package for EC3-X33

A: White wire B: Black wire C: Blue wire D: Brown wire

E: Plug cable assembly EX5-Nxx for connection to EX4/EX5/EX6/EX7/EX8

G: Remote control panel, system controller

H: Alarm relay, dry contact. Relay coil is not energised at Alarm or power off

I: Digital input (0V/open = Stop; 24V/closed = Start)

J: Transformer Class II, 24VAC secondary / 25VA (ECT 323, 804 332)

K: Third party controller (can use the analog output signal from EC3)

Selection TableTCP/IP

Description Type Order No. Type Order No.Universal Superheat Controller EC3-X33 807 783 EC3-X32 807 782Terminal Kit K03-X33 807 645 K03-X32 807 644

Description Type Order No. NoteUniversal Superheat Controller EC3-X33 807 783Terminal Kit K03-X33 807 645 For EC3-X33Display/Keyboard for EC3-X33 ECD-002 807 657Ethernet Cable 3m ECC-N30 807 861Temperature Sensor ECN-N60 804 497 For EC3-X33 and EC3-X32

Pressure Transmitter PT4-07M 802 332 R22, R134a, R507, R404A, R407C, R124

Plug and Cable Assembly for PT4 PT4-M60 804 805EX Valve (EX5 Example) EX5-U21 800 618 EX4, EX5, EX6, EX7, EX8EX Cable Connector EX5-N60 804 652 For EX4, EX5, EX6, EX7, EX8


10

95

EC3-X33 QUICK SET-UP

Code Description Default Min Max RecommendationH5 Password 12 1 199 Modifyu0 Refrigerant 1 0 7 Select according to system refrigerant

0 = R221 = R134a2 = R5073 = R404A4 = R407C5 = R410A6 = R1247 = R744

uP Pressure sensor type 0 0 1 Modify only for R410A or R7440 = PT4-07M1 = PT4-18M (for R410A, R744 subcritical)2 = PT4-30M for R744 transcritical3 = PT4-50M for R744 transcritical

ut Valve Type 5 1 5 Select according to installed valve1 = EX42 = EX53 = EX64 = EX75 = EX8

uu Start up opening 50 10 100 Factory settingu9 Start up opening duration 5 1 30 Factory settinguL Low superheat alarm function 1 0 2 Factory setting

0 = Disable1 = Enable, auto reset

u5 Superheat set-point 6 3 30 Factory settingu2 MOP Control 1 0 1 Disable if you do not need MOP function

0 = Disable1 = Enable

u3 MOP Temperature ?? Modify according to operating envelope of compressor/5 Units SI / Imperial 0 0 1 Factory setting

0 = Metric ºC, K, bar1 = Imperial F, R, psig

/1 Permanent display parameter 0 0 4 Factory setting0 = Superheat1 = Evaporating pressure2 = Valve opening %3 = Suction gas temperature4 = Evaporating temperature

u4 Superheat control mode 0 1 0 Factory setting0 = Standard1 = Slow

b1 Battery error management 2 0 3 Factory setting0 = Disable1 = Alarm display only2 = Enable, auto reset3 = Enable, manual reset


11

96

EXD-U00 UNIVERSAL DRIVER MODULE

Automatic operation directly proportional to input signal no parameter setting requiredEasy con guration by dip switchesFor use with CFC’s, HCFC’s and HFC’s not for use with ammoniaMaximum exibility with reduced inventoryDIN rail mounted aluminum housing

•

••

••


The EXD-U00 driver module is for the EX-4 through 8 electronic control valves. The driver module contains all required algorithms, hardware and software the only requirements are an analog 4-20 mA or 0-10 V signal.Con gured to operate as a: Solenoid Valve Electronic Expansion Valve Hot Gas By-pass Evaporator Pressure Regulator Crankcase Pressure Regulator Head Pressure Control Liquid Level Control Liquid Injection Valve

Con gurationDriver module can be con gured via Dip-switches

Two outputs for separate drivers or controllers24 VAC inputreliable power source in event of power failureDIN rail mounted aluminum housing

•

••

•


In the event of a power loss an eletronic valve is not able to drive closed and will remain in the position at time of failure. Because of this there is a likely potential for the refrigerant to migrate, which may result compres-sor failure. The ECP-024 is a simple and reliable solution to drive the valve closed and prevent the harmful effects of migration.

UNINTERRUPTIBLE POWER SUPPLY ECP-024

FUNCTION

The driver module requires an analog input signal 4 - 20 mA or 0 - 10 V. The output is the closing/opening of EX-4 through 8 and consequently the control of refrigerant liquid or vapour mass ow in accordance with the analog input. The universal driver module can be connected to any controller which can provide the speci ed analog signal (4-20 mA or 0-10 V) This gives extreme exibility to retro tting systems to achieve different functionality utilizing an existing controller.

TYPICAL PACKAGE

Universal Driver Module EXD-U00 804 557

Terminal Kit for EXD-u00 K09-U00 804 559

Transformer 24V, 25VA ECT-323 804 424

Uninnteruptible Power Supply RCP-024 804 558

Terminal kit for ECP-024 K09-P00 804 560

Electronic Stepper Valve EX - 5 800 600

EX Cable and Connector EX5-N60 804 652

Achievable function

Dip-switchnumber

EX4/5/6operation

EX7operation

EX8operation

4-20 mAAnalogue

input signal

0-10VAnalogue

input signal

With start mode

Withoutstart mode

12345678

OFFONONOFFONOFF

--

ONOFFOFFONOFFON

--

ONONOFFONONON

--

-------

OFF

-------

ON

------

ON-

------

OFF-


12

97

EX Electronic Control Valve series applications: Expansion Valve Hot-Gas Bypass Valve Evaporator Pressure Regulator Crankcase Pressure Regulator Head Pressure Control Liquid Level Control Liquid Injection Valve

EX ELECTRONIC CONTROLVALVE SERIES

Fully hermetic, corrosion resistant, 100% stainless steelFor use CFC’s, HCFC’s, HFC’s - mineral,alkyl benzene and POE systems (not for use with ammable refrigerants)Bi-Polar stepper motor driven (24 VDC)Full valve travel

EX-4 / 5 / 6 = 750 steps 1.5 seconds EX-7 = 1600 steps 3.2 seconds EX-8 = 2600 steps 5.2 seconds

Direct coupling of motor and valve for high reliabilityPositive Shut-off function eliminates solenoid requirementHigh capacity and resolution due to straight through designBalanced force designCeramic slide and port for accurate ow and minimal wearMaximum working pressure: EX-4 653 psig

EX-5/6 624 psig EX-7/8 508 psig

MOPD Maximum Operating Pressure Differential: EX-4 475 psig EX-5/6 435 psig EX-7/8 360 psig

Refrigerant temperature range: -68oF to 176oFCRN le number: Pending (see page A)

••

••

••••••

•

••

Flow Control’s patented ceramic slide and port design ensures a reliable linear modulation of mass ow vs valve position. Other designs drive a valve stem into a seat, thus producing non-linear ow per step.

Note: EX4, EX5, EX6, EX7 and EX8 are delivered without cable/connector assembly. The cable/connector assembly must be ordered separately.

Suction Duty CapacitiesFor pressure drops other than 2 psi use capacity from EX Suction Duty

Capacity tables and multiply by the appropriate factor

EX4 EX5/EX6 EX7EX8

open partial open closed

SELECTION CHART - CAPACITIES REPRESENT VALVE FULLY OPEN (NO RESERVE CAPACITY) AT 100OF/40OF EQUIVALENT PRESSURE DROP

Pressure Drop (psi) 1.5 2 3 4.4 Factor 0.82 1 1.15 1.41

Type Order No. Expansion Valve Nominal Capacity (tons)

Regulation Inlet connection Outlet connectionR 407C R 404A/507 R 134a R 410A R 22 R 124 R 744

EX4-I21 800 615 4.5 3.3 3.6 5.5 4.7 2.6 9.5

10 ... 100%

3/8” ODF 5/8” ODF

EX4-U31 800 617 4.5 3.3 3.6 5.5 4.7 2.6 9.5 5/8” ODF 5/8” ODF Bi-Flow

EX5-U21 800 618 15.1 9.9 11.1 16.5 14.2 8 5/8” ODF 7/8” ODF

EX5-U31 800 619 15.1 9.9 11.1 16.5 14.2 8 5/8” ODF 7/8” ODF Bi-Flow

EX6-I21 800 620 35.8 23.9 26.4 39.8 34.1 19.1 7/8” ODF 1-1/8” ODF

EX6-I31 800 622 35.8 23.9 26.4 39.8 34.1 19.1 1-1/8” ODF 1-1/8” ODF Bi-Flow

EX7-I21 800 624 98.6 65.3 72.4 93.7 1-3/8” ODF 1-3/8” ODF

EX7-U31 800 626 98.6 65.3 72.4 93.7 1-3/8” ODF 1-3/8” ODF Bi-Flow

EX8-I21 800 631 262.7 174.1 193.1 249.9 1-5/8” ODF 1-5/8” ODF

Cable & Connector Assembly for EX4, EX5, EX6, EX7 and EX8

EX5-N60 20 ft length PCN 804652

FEATURES


13

98

EX SUCTION DUTY CAPACITY

CondensingTemperature

R - 134a Maximum Capacity in Tons (2 psi drop, others page 97) ValveTypeEvaporator Temperature

50 °F 40 °F 30 °F 20 °F 0 °F

140 °F 2.8 2.6 2.3 1.7 1.1 EX78.5 7.7 6.8 5.1 3.7 EX8

120 °F 3.1 2.8 2.6 2.0 1.4 EX79.7 8.5 7.7 6.0 4.3 EX8

100 °F 3.4 3.1 2.8 2.3 1.7 EX710.8 9.7 8.5 6.5 4.8 EX8

90 °F 4.0 3.4 3.1 2.3 1.7 EX711.6 10.5 9.4 7.4 5.4 EX8

70 °F 4.3 3.7 3.4 2.6 2.0 EX712.8 11.4 10.2 8.0 6.0 EX8


R - 22 Maximum Capacity in Tons (2 psi drop, others page 97) ValveTypeEvaporator Temperature

50 °F 40 °F 30 °F 20 °F 0 °F -20 °F -40 °F

140 °F 3.7 3.4 3.1 2.6 2.0 1.4 1.1 EX711.6 10.5 9.7 7.7 6.2 4.3 3.4 EX8

120 °F 4.3 3.7 3.4 2.8 2.3 1.7 1.4 EX712.8 11.6 10.5 8.5 6.8 5.4 4.0 EX8

100 °F 4.5 4.3 3.7 3.1 2.6 2.0 1.4 EX713.9 12.8 11.6 9.4 7.7 6.0 4.3 EX8

90 °F 4.8 4.5 4.0 3.4 2.6 2.0 1.4 EX715.0 13.6 12.5 10.2 8.2 6.2 4.5 EX8

70 °F 5.4 4.8 4.3 3.7 2.8 2.3 1.7 EX715.9 14.8 13.3 11.0 8.8 6.8 5.1 EX8


R - 407C Maximum Capacity in Tons (2 psi drop, others page 97) ValveTypeEvaporator Temperature

50 °F 40 °F 30 °F 20 °F 0 °F

140 °F 3.4 3.1 2.8 2.3 1.7 EX710.2 9.4 8.2 6.5 5.1 EX8

120 °F 4.0 3.4 3.1 2.6 2.0 EX711.6 10.5 9.7 7.7 6.0 EX8

100 °F 4.3 4.0 3.4 2.8 2.3 EX713.0 11.9 10.8 8.5 6.5 EX8

90 °F 4.8 4.3 4.0 3.1 2.6 EX714.5 13.0 11.6 9.4 7.4 EX8

70 °F 5.1 4.5 4.3 3.4 2.6 EX715.6 14.2 12.8 10.2 8.0 EX8


R - 404A/507 Maximum Capacity in Tons (2 psi drop, others page 97) ValveTypeEvaporator Temperature

50 °F 40 °F 30 °F 20 °F 0 °F -20 °F -40 °F

140 °F 2.6 2.3 2.3 1.7 1.1 0.9 0.6 EX78.2 7.4 6.5 5.1 3.7 2.8 2.0 EX8

120 °F 3.4 3.1 2.6 2.0 1.7 1.1 0.9 EX710.2 9.1 8.2 6.5 5.1 3.7 2.6 EX8

100 °F 4.0 3.4 3.1 2.6 2.0 1.4 1.1 EX711.9 10.8 9.7 7.7 6.0 4.5 3.4 EX8

90 °F 4.5 4.0 3.7 2.8 2.3 1.7 1.4 EX713.6 12.2 11.0 8.8 7.1 5.4 4.0 EX8

70 °F 4.8 4.5 4.0 3.4 2.6 2.0 1.4 EX715.0 13.6 12.5 9.9 8.0 6.0 4.5 EX8


14

99

EX HOT GAS BYPASS CAPACITY

EX LIQUID CAPACITY FOR HEAD PRESSURE CONTROL


R - 22/407C R134a R404/507 ValveTypeat 40 °F Saturated Suction Temperature

140 °F

6.5 4.5 5.4 EX515.3 10.8 12.8 EX654.2 38.3 45.7 EX7

164.0 116.7 138.6 EX8

120 °F

5.7 4.0 5.1 EX513.1 9.1 11.6 EX646.3 32.7 41.7 EX7

140.6 98.8 126.9 EX8

100 °F

4.5 3.4 4.5 EX510.8 7.7 10.2 EX638.6 27.0 36.9 EX7

117.6 82.1 111.9 EX8

90 °F

4.0 2.6 3.7 EX59.1 6.2 8.8 EX6

31.8 22.2 31.5 EX796.6 67.0 95.4 EX8

70 °F

2.8 1.7 2.8 EX56.2 4.0 6.5 EX6

22.4 14.5 22.7 EX768.4 44.0 69.3 EX8


R - 407C Maximum Capacity in Tons (5 psi drop) ValveType

40 °F 30 °F 20 °F 0 °F -20 °F -40 °F

140 °F

4.0 3.7 3.4 3.4 EX59.1 8.5 8.2 8.0 EX6

31.8 30.7 29.3 27.8 EX796.6 92.9 88.9 84.6 EX8

120 °F

4.5 4.3 4.3 4.0 EX510.5 10.2 9.9 9.4 EX637.5 36.4 34.9 33.5 EX7

114.2 110.2 105.9 101.7 EX8

100 °F

5.1 5.1 4.8 4.8 EX512.2 11.6 11.4 10.8 EX643.2 41.7 40.3 38.9 EX7

130.6 126.7 122.4 117.9 EX8

90 °F

6.0 5.7 5.4 5.4 EX513.6 13.3 12.8 12.5 EX648.3 47.1 45.4 44.0 EX7

146.8 142.9 138.3 133.8 EX8

70 °F

6.5 6.2 6.2 6.0 EX515.1 14.8 14.2 13.9 EX653.7 52.3 50.8 49.1 EX7

162.7 158.5 154.2 149.4 EX8

50 °F

6.8 6.8 6.5 EX516.2 15.6 15.3 EX657.4 55.7 54.2 EX7

174.1 169.5 164.7 EX8


15

100


R - 22 Maximum Capacity in Tons (5 psi drop)ValveTypeEvaporator Temperature

40 °F 30 °F 20 °F 0 °F -20 °F -40 °F

140 °F

4.3 4.3 4.3 4.0 4.0 3.7 EX510.2 9.9 9.7 9.4 9.1 8.5 EX636.4 35.2 34.1 32.9 31.8 30.7 EX7

109.9 107.1 103.7 100.3 96.8 93.2 EX8

120 °F

4.8 4.8 4.5 4.8 4.5 4.3 EX511.6 11.4 10.2 11.1 10.2 9.9 EX640.9 40.0 36.6 38.9 36.6 35.2 EX7

124.7 121.6 111.0 118.1 111.0 107.1 EX8

100 °F

5.4 5.4 5.4 5.1 4.8 4.8 EX512.8 12.5 12.2 11.9 11.6 11.1 EX645.7 44.6 43.5 42.3 41.2 39.8 EX7

138.6 135.5 132.1 128.7 124.7 121.0 EX8

90 °F

6.0 6.0 5.7 5.7 5.4 5.4 EX514.2 13.9 13.6 13.1 12.8 12.5 EX650.3 49.1 48.0 46.9 45.4 44.3 EX7

152.2 149.1 145.7 142.0 138.0 134.0 EX8

70 °F

6.5 6.5 6.2 6.2 6.0 6.0 EX515.3 15.1 14.8 14.5 13.9 13.6 EX654.5 53.4 52.3 51.1 49.7 48.8 EX7

165.9 162.4 159.0 155.3 151.4 147.4 EX8

50 °F

7.1 6.8 6.8 6.5 6.2 EX516.2 15.9 15.6 15.3 14.8 EX657.9 56.8 55.4 54.2 52.8 EX7

175.8 172.1 168.4 164.4 160.5 EX8

30 °F

7.4 7.1 7.1 6.8 EX517.0 16.8 16.5 15.9 EX661.1 59.6 58.5 57.1 EX7

185.2 181.5 177.2 173.2 EX8

10 °F

8.0 8.0 7.7 7.7 7.4 EX518.7 18.5 18.0 17.6 17.3 EX666.5 65.3 63.9 62.5 61.3 EX7

201.6 197.9 194.3 190.0 186.0 EX8


R - 134a Maximum Capacity in Tons (5 psi drop)ValveTypeEvaporator Temperature

40 °F 30 °F 20 °F 0 °F -20 °F -40 °F

140 °F

4.0 3.7 3.7 3.4 EX59.1 8.8 8.2 7.7 EX6

32.7 31.0 29.5 27.8 EX799.4 94.3 89.5 84.1 EX8

120 °F

4.5 4.3 4.3 4.0 EX510.5 10.2 9.9 9.1 EX637.8 36.1 34.4 32.7 EX7

115.0 109.9 104.8 99.4 EX8

100 °F

5.1 5.1 4.8 4.5 EX511.9 11.6 11.1 10.5 EX642.9 41.2 39.5 37.8 EX7

130.1 125.0 119.8 114.5 EX8

90 °F

5.7 5.7 5.4 5.1 EX513.3 13.1 12.5 11.9 EX647.7 46.0 44.3 42.6 EX7

145.4 140.0 134.6 129.2 EX8

70 °F

6.2 6.2 6.0 5.7 EX514.8 14.5 13.9 13.3 EX652.8 51.1 49.1 47.4 EX7

160.2 155.1 149.4 144.0 EX8

50 °F

6.8 6.5 6.2 EX515.6 15.3 14.8 EX655.9 54.0 52.3 EX7

169.38 164.2 158.5 EX8


16

101

PT4 PRESSURE TRANSMITTER

Pressure sensitive piezo-based cell with strong Primary output signal for precise and noise-free operationPressure cell protected by oil lled pressure enclosureOutput signal 4 to 20 mASeparate electrical plug for easy eld serviceVibration and pulsation resistantCompact dimensionsPressure connector 1/4” SAE female (7/16-20 UNF) with shraeder depressorVariable supply voltage (10-28 VDC)Protection class IP 65, per: EN60529Maximum Working Pressure: 500 psigCE-mark under EC EMC-DirectiveLifetime = 5,000,000 full stroke cyclesUL le number: E258370CRN le number: OF0845.9 (see page A)

•

••••••

•••••••

FEATURES AND SPECIFICATIONSPlug/Cable assembly

sold seperately


R - 404A/507 Maximum Capacity in Tons (5 psi drop)ValveTypeEvaporator Temperature

40 °F 30 °F 20 °F 0 °F -20 °F -40 °F

140 °F

2.3 2.3 2.0 1.7 1.7 1.4 EX55.4 4.8 4.5 4.3 3.7 3.4 EX6

18.7 17.6 16.5 15.1 13.6 12.2 EX757.4 53.7 49.7 45.4 41.5 36.9 EX8

120 °F

3.1 2.8 2.6 2.6 2.3 2.3 EX56.8 6.5 6.2 5.7 5.4. 4.8 EX6

24.7 23.3 22.2 20.7 19 17.6 EX775.0 71.0 67.0 62.5 58.2 53.7 EX8

100 °F

3.7 3.4 3.4 3.1 2.8 2.8 EX58.5 8.0 7.7 7.4 6.8 6.5 EX6

30.1 28.7 27.3 25.8 24.1 22.7 EX791.2 86.9 82.6 78.4 73.8 69 EX8

90 °F

4.3 4.0 4.0 3.7 3.4 3.4 EX59.9 9.4 9.1 8.5 8.2 7.7 EX6

34.9 33.8 32.4 30.7 29.3 27.5 EX7106.5 102.2 98.0 93.4 88.6 83.8 EX8

70 °F

4.8 4.5 4.5 4.3 4 4 EX511.4 10.8 10.5 9.9 9.7 9.1 EX640.0 38.6 37.2 35.5 34.1 32.4 EX7

126.3 117.0 112.7 107.9 103.1 98.3 EX8

50 °F

5.1 5.1 4.8 4.5 4.5 EX512.2 11.6 11.4 10.8 10.5 EX643.5 41.7 40.3 38.6 36.9 EX7

131.8 126.9 122.4 117.3 112.2 EX8

30 °F

5.7 5.4 5.1 5.1 EX513.1 12.5 12.2 11.6 EX646.6 44.9 43.2 41.5 EX7

114.1 136.3 131.5 126.4 EX8

10 °F

6.0 5.7 5.7 EX513.9 13.3 13.1 EX649.4 47.7 46 EX7

150.2 145.1 140 EX8

NOMENCLATURE EXAMPLE: PT4-07MPT4 07M

PressureTransmitter

Pressure Range7 22” Hg to 100 psig

18 0 to 260 psig30 0 to 440 psig50 0 to 725 psig

Ordering InformationPCN Description

802 332 PT4-07M802 333 PT4-18M802 334 PT4-30M802 326 PT4-50S804 805 PT4-M60 Plug/Cable Assembly


17

EMERSON FLOW CONTROLS DRIERSEKP EXTRA-KLEANLIQUID LINE FILTER-DRIERCushioned flow, filtration first, process controlled fiberglass filter network, manufacturer approved for use with POE oils, 20 micron filtration, specifically blended desiccant 75% molecular sieve and 25%.

Flow Capacity Tons @ 1 PSI P*Order Number Unit Size (cu in) Connections (in) R134A R22 R404A/R507 R410A EKP-032 3 1/4 SAE 2 2.2 1.5 2.2EKP-032S 3 1/4 ODF - 3/8 ODM 2.7 2.9 1.9 2.9EKP-033 3 3/8 SAE 3 3.2 2.1 3.2EKP-033S 3 3/8 ODF - 1/2 ODM 3 3.2 2.2 3.3EKP-052 5 1/4 SAE 2.1 2.3 1.5 2.3EKP-052S 5 1/4 ODF 3.3 3.6 2.4 3.6EKP-053 5 3/8 SAE 3.5 3.8 2.5 3.8EKP-053S 5 3/8 ODF 4.4 4.8 3.2 4.9EKP-082 8 1/4 SAE 2.3 2.5 1.7 2.5EKP-082S 8 1/4 ODF 3.1 3.4 2.3 3.4EKP-083 8 3/8 SAE 4 4.3 2.9 4.4EKP-083S 8 3/8 ODF 4.5 4.9 3.3 5EKP-084 8 1/2 SAE 6.7 7.3 4.9 7.4EKP-084S 8 1/2 ODF 7.1 7.7 5.2 7.8EKP-162 16 1/4 SAE 2.3 2.4 1.6 2.5EKP-162S 16 1/4 ODF 3.1 3.4 2.3 3.5EKP-163 16 3/8 SAE 3.9 4.3 2.9 4.3EKP-163S 16 3/8 ODF 4.4 4.8 3.2 4.9EKP-164 16 1/2 SAE 7.2 7.8 5.2 7.9EKP-164S 16 1/2 ODF 8.5 9.2 6.2 9.3EKP-165 16 5/8 SAE 9.7 10.5 7 10.6EKP-165S 16 5/8 ODF 10.1 10.9 7.3 11EKP-303 30 3/8 SAE 4.3 4.7 3.1 -EKP-303S 30 3/8 ODF 6.3 6.8 4.5 -EKP-304 30 1/2 SAE 8.1 8.8 5.9 -EKP-304S 30 1/2 ODF 10 10.8 7.2 -EKP-305 30 5/8 SAE 10.6 11.5 7.7 -EKP-305S 30 5/8 ODF 12.5 13.5 9 -EKP-307S 30 7/8 ODF 16.8 18.2 12.2 -EKP-413 41 3/8 SAE 4.3 4.7 3.1 -EKP-414 41 1/2 SAE 10.4 11.3 7.5 -EKP-414S 41 1/2 ODF 10.8 11.7 7.8 -EKP-415 41 5/8 SAE 12 13 8.7 -EKP-415S 41 5/8 ODF 17 18.4 12.3 -EKP-417S 41 7/8 ODF 20.3 22 14.7 -EKP-419S 41 1 1/8 ODF 27.7 30 20.1 -EKP-757S 75 7/8 ODF 22.2 24 16.1 -EKP-759S 75 1 1/8 ODF 32.7 35.4 23.7 -All ratings in accordance with ARI standard 710-86 86°F Liquid Refrigerant Temperature 5°F Saturated Vapour Temperature3.1 lbs/min/ton for R134a 2.9 lbs/min/ton for R22 4.0 lbs/min/tons for R404a/R507


18

ALF RECOVERY, RECYCLE AND RECLAIM FILTER

Order Number Connections (in)ALF-032S 1/4 ODFALF-033S 3/8 ODFALF-034S 1/2 ODF

Designed to meet commercial refrigeration requirements. Maximizes removal of contaminants including: aluminum and iron particles, copper and iron oxides, metal chips, varnish, burrs, flux and dirt. The ALF can also be utilized for recovery, recycle and reclaim applications. Filter area: 4.28 square inches; Filtration: 40 microns; UL listed and CSA certified.

Flow Capacity (tons) @1 PSI Pressure Drop

Liquid RefrigerantCapacity By Weight (oz)

Order Number Connections (in) R22 R410A R407C Filter Area (sq in) Desiccant Volume (cu in) 75°F 125°F BFK-083 3/8 SAE 4.5 4.5 4.4 16.5 4.6 7.7 6.9BFK-083S 3/8 ODF 5.1 5.1 5 16.5 4.6 7.7 6.9BFK-084 1/2 SAE 6.4 6.4 6.3 16.5 4.6 7.7 6.9BFK-084S 1/2 ODF 6.7 6.7 6.6 16.5 4.6 7.7 6.9BFK-163 3/8 SAE 4.6 4.6 4.5 28.3 10 14.2 12.7EBF-163 3/8 SAE 5.2 5.2 5.1 28.3 10 14.2 12.7BFK-163S 3/8 ODF 5.2 5.2 5.1 28.3 10 14.2 12.7EBF-163S 3/8 ODF 5.2 5.2 5.1 28.3 10 14.2 12.7BFK-164 1/2 SAE 7.7 7.7 7.6 28.3 10 14.2 12.7EBF-164 1/2 SAE 6.6 6.6 6.5 28.3 10 14.2 12.7BFK-164S 1/2 ODF 8.1 8.1 7.9 28.3 10 14.2 12.7EBF-164S 1/2 ODF 6.6 6.6 6.5 28.3 10 14.2 12.7BFK-165 5/8 SAE 8.3 8.3 8.1 28.3 10 14.2 12.7BFK-165S 5/8 ODF 8.7 8.7 8.5 28.3 10 14.2 12.7BFK-305S 5/8 ODF 14.2 - 13.9 - - - -

EMERSON FLOW CONTROLS DRIERSBFK/EBF SERIES BI-FLO HEAT PUMP FILTER-DRIERSAvailable in two basic sizes, the bi-directional filter-drier provides heat pump system protection in heating and cooling cycles summer and winter with one compact unit. It reduces complex piping and resulting costs. Internal check valves allow flow and filtration in either direction. May be installed in any position. Provides effective removal of moisture, acid and solid contaminants.

CSFD COMPACT SUCTION LINE FILTER DRIERS

Order Number Connections (in) WidthCSFD-14S4-VV 1/2 ODF 4 1/4CSFD-14S5-VV 5/8 ODF 4 1/2CSFD-14S6-VV 3/4 ODF 4 3/8CSFD-14S7-VV 7/8 ODF 4 9/16CSFD-14S9-VV** 1 1/8 ODF 4 7/8

The CSFD has a compact 14 cubic inch, solid block desiccant core, design that is perfect for short lay-ins. Compact suction line filter drier for moisture, acid and contaminant removal. For use with CFC, HCFC and HFC refrigerants. Features: Dual access valves; high acid removal; solid copper fittings; corrosion resistant epoxy powder paint finish.

** 400 Maximum working pressure


19

ASD PREMIUM SUCTION LINE FILTER-DRIERS

Flow Capacity in (tons) Refrigerant*R12 R134a R502 R404a/507 R22

Evaporator Temperature20°F -20°F 40°F 0°F 20°F -20°F 20°F -20°F 20°F -20°F

Pressure Drop (PSI)Order Number Connections (in) 1.5 0.5 2 1 2 1 2 1 2 1ASD45S7-VV 7/8 ODF 3.6 1.5 5.1 2.2 4.8 1.9 4.8 2 6 2.6ASD50S9-VV 1 1/8 ODF 5 1.8 7.3 3 6.9 2.7 6.9 2.8 8.5 3.5ASD75S11-VV 1 3/8 ODF 5.9 2 8.8 3.5 8.4 3.1 8.4 3.2 10.2 4ASD75S13-VV 1 5/8 ODF 6.2 2.1 9.3 3.7 8.9 3.3 8.2 3.4 10.7 4.2

Incorporate the protective filter plus a desiccant specially blended for maximum moisture and acid removal. Rugged steel shells for shock resistance. Corrosion-resistance finish. Low pressure drop-full flow fittings. Filtration to less than 10 microns. Dual access valves. Full copper fittings-easy to sweat in. Safe working pressure: 500 pisg. For use with CFC, HCFC and HFC refrigerants.

* All ratings in accordance with ARI standard 730-80.

EMERSON FLOW CONTROLS DRIERSSFD SERIES SUCTION LINE FILTER DRIERS

R134A R22 R404A/507 LengthOrder Number Connections (in) 40°F @ 2∆P 0°F @ 1∆P 20°F @ 2∆P -20°F @ 1∆P 20°F @ 2∆P -20°F @ ∆P Case Overall SFD13S4-VV 1/2 ODF 2.3 1 2.3 1 1.9 0.8 3 3/8 4 15/16SFD13S5-VV 5/8 SAE 3.1 1.3 3.2 1.4 2.7 1.1 3 3/8 5 5/32SFD13S6-VV 3/4 ODF 4.1 1.7 4.2 1.8 3.5 1.4 3 3/8 5 1/4SFD13S7-VV 7/8 ODF 4.4 1.9 4.6 1.9 3.9 1.5 3 3/8 5 3/4SFD27S7-VV 7/8 ODF 4.7 1.9 4.8 1.8 4.1 1.6 5 1/8 7 1/2SFD27S9-VV 1 1/8 ODF 5.2 2 5.4 2.1 4.6 1.7 5 1/8 7 5/8SFD54S11-VV 1 3/8 ODF 4.5 1.7 4.6 1.8 3.9 1.5 8 1/4 12 1/4SFD54S13-VV 1 5/8 ODF 4.6 1.8 4.7 2 4 1.6 8 1/4 12 5/32

The compacted suction filter drier for use after burnout or when major work has been performed. Suction line filter-drier for moisture, acid and contaminant removal. Corrosion-resistant finish. Low pressure drop-full flow fittings. Filtration to less than 10 microns. Dual access valves. Full copper fittings easy to sweat in. Safe working pressure: 500 psig. For use with CFC, HCFC and HFC refrigerants.


ASF SERIES SUCTION LINE FILTERS

Flow Capacity in (tons) Refrigerant*R12 R134a R502 R404a/507 R22

Evaporator Temperature20°F -20°F 40°F 0°F 20°F -20°F 20°F -20°F 20°F -20°F

Pressure Drop (PSI)Order Number Connections (in) 1.5 0.5 2 1 2 1 2 1 2 1ASF-28S3-VV 3/8 ODF 1.2 0.8 0.5 0.5 1.2 0.8 0.5 0.4ASF-28S4-VV 1/2 ODF 1.3 0.8 2 0.9 2.0 0.8 2 .8 2.3 1.2ASF-35F5-VV 5/8 SAE 1.5 0.9 2.3 1 2.3 0.9 2.3 .9 2.6 1.3ASF-35S5-VV 5/8 ODF 2.2 1.4 3.3 1.5 3.2 1.4 3.2 1.4 3.7 1.9ASF-45S6-VV 3/4 ODF 3.2 1.8 4.8 2.2 4.7 1.8 4.7 1.9 5.5 2.7ASF-45S7-VV 7/8 ODF 4.8 1.9 6.7 3.1 6.3 2.7 6.3 2.8 8 3.6ASF-50S9-VV 1 1/8 ODF 6.8 2.6 9.5 4.3 10 3.9 10 4 12 4.9ASF-75S11-VV 1 3/8 ODF 8.8 3.4 12 5.6 13 4.9 13 5.1 15 6.5ASF-75S13-VV 1 5/8 ODF 9.7 3.8 14 6.3 13 5.0 13 5.2 16 6.7ASF-64S17-VV 2 1/8 ODF 18.3 7.2 26 12 23 9.5 23 9.8 27 12ASF-64S21-VV 2 5/8 ODF 21.4 8.9 31 14 26 12 26 12 31 14

ASF suction line filters are specifically designed to protect the compressor from dirt and solid contaminants.



20

BLOCKS AND FILTER CORES

Order Number Refrigerant Type FunctionAB-48 CFC, HCFC Burnout cleanup, High acid removalAD-48 CFC, HCFC High acid removalAH-48 CFC, HCFC High acid and water removalD-42 CFC, HCFC High acid removalF-48 CFC, HCFC, HFC Filter (suction only)F-48R CFC, HCFC, HFC Filter (suction only) reverse flowF-100 CFC, HCFC, HFC Filter (suction only)H-100 CFC, HCFC High acid and water removalUK-48 CFC, HCFC, HFC Universal replacementUK-100 CFC, HCFC, HFC Universal replacementW-48 CFC, HCFC, HFC High wax Burnout cleanupW-100 CFC, HCFC, HFC High wax Burnout cleanup

Fit interchangeably in type ADKS and STAS filter-drier shells and all competitive shell type filter driers. Supplied with all necessary gaskets and couplings.

EMERSON FLOW CONTROLS TAKE APART SHELLS AND CORESADKS SERIES LARGE CAPACITY FILTER-DRIERSADKS LIQUID AND SUCTION LINE FILTER-DRIER RATINGS

Flow Capacity in Tons @ 1 PSIOrder Number Connections (in) R12 R134A R22 R407C R404A/R507 R502ADKS 30013T 1 5/8 ODF 57 70 76 74 50 49ADKS 30017T 2 1/8 ODF 69 84 92 90 61 59ADKS 40017T 2 1/8 ODF 73 89 97 95 64 63ADKS 40021T 2 5/8 ODF 83 101 110 107 73 71

Offers the flexibility of using either replaceable filter cores as protection against solid contaminants, or replaceable filter-drier blocks for protection against acid, moisture and solids. Provides high liquid line flow capacities for larger air-conditioning and refrigeration jobs. Simplified internal hardware for easy installation. Full flow fittings for low pressure drop. Corrosion-resistant epoxy paint finish. Sturdy steel shells for long life durability. Safe working pressure: 500 psig.

Flow Cap. in (tons) @ Evap. Temp. R134A

Flow Cap. in (tons) @ Evap. Temp. R22

Flow Cap. in (tons) @ Evap. Temp. R404A/R507

Order Number Connections (in) 40°F @ 2∆P

20°F @ 1.5∆P

0°F @ 1∆P

-20°F @ 0.5∆P

40°F @ 3∆P

20°F @ 2∆P

0°F@ 1.5∆P

-20°F @ 1∆P

-40°F @ 0.5∆P

40°F @ 3∆P

20°F @ 2∆P

0°F @ 1.5∆P

-20°F@ 1∆P

-40°F@ 0.5∆P

STAS-489S-V 1 1/8 ODF 8 6 4 1 15 9 7 4 1 13 8 6 4 2STAS-4811S-V 1 3/8 ODF 10 7 4 2 18 11 8 5 2 17 10 6 4 3STAS-4813S-V 1 5/8 ODF 13 8 5 3 23 13 10 6 3 20 12 7 5 4STAS-4817S-V 2 1/8 ODF 17 10 7 4 31 20 13 7 3 27 17 10 6 5STAS-4821S-V 2 5/8 ODF 20 13 8 4 40 27 17 10 5 37 20 13 8 6STAS-9617S-V 2 1/8 ODF 18 12 6 4 33 20 13 8 4 27 17 11 7 5STAS-9621S-V 2 5/8 ODF 25 17 10 5 47 28 18 11 6 40 23 17 10 7

STAS SERIES STEEL TAKE-APART SHELL FILTER DRIERS FOR LIQUID AND SUCTION LINE SERVICESUCTION LINE FILTER-DRIER RATINGSThese devices offer the flexibility of using either replaceable filter cores as protection against solid contaminants, or replaceable filter-drier blocks for protection against acid, moisture and solids. They provide high liquid line flow capacities for larger air-conditioning and refrigeration jobs. Simplified internal hardware for easy installation. Full flow fittings for low pressure drop. Corrosion-resistant epoxy paint finish. Sturdy steel shells for long life durability. Safe working pressure 500 psig.

SUCTION LINE FILTER-DRIER RATINGS


21

REPLACEMENT PARTS FOR STAS FILTER-DRIERSOrder Number Description X27458-1 Shell strainer assembly for STAS-48 series X27458-2 Shell strainer assembly for STAS-96 seriesX11983-1 Cover gasket (includes felt set), used on all STAS series

Flow Capacity (tons) @ 1 PSIOrder Number Blocks Connections (in) R12 R134A R22 R407C R404A/R507 R502STAS-485T 1 5/8 ODF 15 19 21 20 14 13STAS-487T 1 7/8 ODF 28 35 38 37 25 24STAS-489T 1 1 1/8 ODF 40 48 53 51 35 34STAS-4811T 1 1 3/8 ODF 46 56 61 59 40 39STAS-4813T 1 1 5/8 ODF - - - - - -STAS-967T 2 7/8 ODF 31 37 41 40 27 26STAS-969T 2 1 1/8 ODF 47 58 63 61 42 40STAS-9611T 2 1 3/8 ODF 59 72 79 77 52 51STAS-9613T 2 1 5/8 ODF 64 78 85 83 56 55STAS-9617T 2 2 1/8 ODF - - - - - -STAS-1449T 3 1 1/8 ODF 46 56 61 56 40 39STAS-14411T 3 1 3/8 ODF 66 81 88 86 58 57STAS-14413T 3 1 5/8 ODF 73 89 97 95 64 63STAS-14417T 3 2 1/8 ODF 84 103 112 109 74 72STAS-19211T 4 1 3/8 ODF 71 86 94 92 62 61STAS-19213T 4 1 5/8 ODF 77 95 103 101 68 66STAS-19217T 4 2 1/8 ODF 87 106 115 112 76 74

LIQUID LINE FILTER-DRIER RATINGS

EMERSON FLOW CONTROLS TAKE APART SHELLS AND CORESSTAS SERIES STEEL TAKE-APART SHELL FILTER DRIERS FOR LIQUID AND SUCTION LINE SERVICE

BTAS BRASS TAKE-APART SUCTION LINE FILTER-DRIEROrder Number Connections (in) Nominal Shell Size (in) Filter Drier Cartridge Filter CoreBTAS-27S-V 7/8 ODF 2 A2F-D A2FBTAS-39S-V 1 1/8 ODF 3 A3F-D A3F BTAS-311S-V 1 3/8 ODF 3 A3F-D A3F BTAS-313S-V 1 5/8 ODF 3 A3F-D A3F BTAS-317S-V 2 1/8 ODF 3 A3F-D A3F BTAS-411S-V 1 3/8 ODF 4 A4F-D A4F BTAS-413S-V 1 5/8 ODF 4 A4F-D A4F BTAS-417S-V 2 1/8 ODF 4 A4F-D A4F BTAS-421S-V 2 5/8 ODF 4 A4F-D A4F BTAS-517S-V 2 1/8 ODF 5 A5F-D A5F BTAS-521S-V 2 5/8 ODF 5 A5F-D A5F BTAS-525S-V 3 1/8 ODF 5 A5F-D A5F


22

BTAS FILTER CAPACITIESFlow Cap. in (tons)

@ Evap. Temp. R134AFlow Cap. in (tons) @ Evap. Temp. R22


Order Number Cartridge Number

40°F @ 2∆P

20°F @ 1.5∆P

0°F @ 1∆P

-20°F @ 0.5∆P

40°F @ 3∆P

20°F @ 2∆P

0°F @ 1.5∆P

-20°F @ 1∆P

-40°F @ 0.5∆P

40°F @ 3∆P

20°F @ 2∆P

0°F @ 1.5∆P

-20°F @ 1∆P

-40°F @ 0.5∆P

BTAS-25S-V A2F 2.7 1.9 1.2 0.6 5.1 3.3 2.2 1.4 0.7 4.1 2.6 1.8 1.1 0.6BTAS-26S-V A2F 4.1 2.8 1.8 1 7.5 4.9 3.3 2.1 1.1 6.1 3.9 2.6 1.6 0.9BTAS-27S-V A2F 4.8 3.3 2.1 1.1 8.8 5.7 3.9 2.5 1.3 7.2 4.6 3.1 1.9 1BTAS-29S-V A2F 7.3 5 3.2 1.7 13.5 8.8 5.9 3.7 2 11 7 4.7 2.9 1.5BTAS-37S-V A3F 5.1 3.5 2.2 1.2 9.4 6.1 4.2 2.6 1.4 7.7 4.9 3.3 2.1 1.1BTAS-39S-V A3F 8.1 5.5 3.5 1.9 15 9.7 6.6 4.1 2.2 12 7.8 5.2 3.2 1.7BTAS-311S-V A3F 13 8.8 5.6 3 24 15.5 10.5 6.6 3.5 19.3 12.4 8.3 5.2 2.7BTAS-313S-V A3F 15.8 10.8 6.9 3.7 29 19 12.8 8.1 4.3 24 15.2 10.2 6.3 3.3BTAS-317S-V A3F 21 14.3 9.1 4.9 38 25 17 10.7 5.7 31 20 13.5 8.4 4.4BTAS-411S-V A4F 13.6 9.3 5.9 3.2 25 16.3 11 7 3.7 20 13 8.8 5.5 2.9BTAS-413S-V A4F 17 11.7 7.4 4 31 20 14 8.7 4.6 26 16.4 11 6.8 3.6BTAS-417S-V A4F 29 19.6 12.4 6.7 53 34 23 14.6 7.8 43 28 18.5 11.5 6BTAS-421S-V A4F 35 24 15.1 8.1 64 42 29 17.8 9.5 52 34 23 14 7.3BTAS-517S-V A5F 34 24 15 8.1 63 41 28 17.6 9.4 52 33 22 13.8 7.2BTAS-521S-V A5F 45 31 20 10.7 84 54 37 23 12.4 68 44 29 18.2 9.6BTAS-525S-V A5F 56 38 24 13.2 103 67 46 29 15.3 84 54 36 23 11.8

Flow Cap. in (tons) @ Evap. Temp. R134A

Flow Cap. in (tons) @ Evap. Temp. R22


Order Number Cartridge Number

40°F @ 2∆P

20°F @ 1.5∆P

0°F @ 1∆P

-20°F @ 0.5∆P

40°F @ 3∆P

20°F @ 2∆P

0°F @ 1.5∆P

-20°F @ 1∆P

-40°F @ 0.5∆P

40°F @ 3∆P

20°F @ 2∆P

0°F @ 1.5∆P

-20°F @ 1∆P

-40°F @ 0.5∆P

BTAS-26S-V A2F-D 3.5 2.4 1.5 0.8 6.5 4.2 2.9 1.8 1.0 5.3 3.4 2.3 1.4 0.7BTAS-27S-V A2F-D 4.1 2.8 1.8 1.0 7.5 4.9 3.3 4.3 2.1 1.1 6.1 3.9 2.6 1.0 0.5BTAS-37S-V A3F-D 4.8 3.3 2.1 1.1 8.9 5.8 3.9 2.5 1.3 7.2 4.6 3.1 1.9 1.0BTAS-39S-V A3F-D 7.4 5.1 3.2 1.7 13.6 8.9 6.0 3.8 2.0 11.1 4.6 4.8 3.0 1.0BTAS-311S-V A3F-D 10.6 7.3 4.6 2.5 19.5 12.7 8.6 5.4 2.9 15.9 10.2 6.8 4.2 2.2BTAS-313S-V A3F-D 12.3 8.4 5.4 2.9 23.0 14.8 10.0 6.3 3.4 18.5 12.0 8.0 5.0 2.6BTAS-317S-V A3F-D 15.3 10.5 6.7 3.6 28.0 18.3 12.5 7.8 4.2 23.0 14.7 9.9 6.1 3.2BTAS-411S-V A4F-D 12.0 8.2 5.2 2.8 22.0 14.4 9.8 6.1 3.3 18.0 11.5 7.8 4.8 2.5BTAS-413S-V A4F-D 15.7 10.8 6.9 3.7 29.0 19.0 12.8 8.1 4.3 24.0 15.2 10.2 6.3 3.3BTAS-417S-V A4F-D 23.0 15.8 10.0 5.4 43.0 28.0 18.8 11.8 6.3 35.0 22.0 14.9 9.3 4.9BTAS-421S-V A4F-D 24.0 16.3 10.3 5.6 44.0 29.0 19.3 12.2 6.5 36.0 23.0 15.4 9.5 5.0BTAS-517S-V A5F-D 28.0 18.8 12.0 6.4 51.0 33.0 22.0 14.0 7.5 41.0 27.0 17.8 11.0 5.0BTAS-521S-V A5F-D 33.0 23.0 14.4 7.8 61.0 40.0 27.0 17.0 9.0 50.0 32.0 22.0 13.3 7.0BTAS-525S-V A5F-D 39.0 27.0 17.1 9.2 72.0 47.0 32.0 20.0 10.7 59.0 38.0 25.0 15.8 8.3

EMERSON FLOW CONTROLS TAKE APART SHELLS AND CORESBTAS FILTER-DRIER CAPACITIES

EMERSON FLOW CONTROLS OIL LEVEL REGULATORW-OLC MECHANICAL OIL LEVEL REGULATORS

Order Number DescriptionW-OLC-2 1/2 Sight GlassW-OLC-4 1/4 Sight GlassW-OLC-2-4 Adjustable 1/4 to 1/2 level

Controls the oil level in the compressor crankcase with a float operated valve. Keeps the oil level at the compressor manufacturer’s recommended level. Direct replacement of popular competitive models. Features: Corrosion resistant epoxy powder paint finish; 1/4 level sight glass (carrier) 1/2 level sight glass (Copeland)


23

SWIVEL NUT x SWIVEL NUT Order Number Size (in)HMI-1UU5 5/8 x 5/8 flare swivel

MALE FLARE x SWIVEL NUT Order Number Size (in)HMI-1MU5 5/8 SAE

MALE FLARE x SWIVEL NUT Order Number Size (in)HMI-1MU3 3/8 SAE

FEMALE FLARE x MALE FLARE Order Number Size (in) HMI-1FM2 1/4 SAE HMI-1FM3 3/8 SAE HMI-1FM4 1/2 SAE

SWEAT x SWEAT (OD) FEMALE EXTENDED ENDS Order Number Size (in)HMI-1TT3 3/8 ODFHMI-1TT4 1/2 ODFHMI-1TT5 5/8 ODFHMI-1TT7 7/8 ODFHMI-1TT9 1/8 ODF

EMERSON FLOW CONTROLS MOISTURE INDICATORSHMI SERIES HERMETIC MOISTURE-LIQUID INDICATORS

MALE FLARE x MALE FLARE Order Number Size (in)HMI-1MM2 1/4 SAE HMI-1MM3 3/8 SAE HMI-1MM4 1/2 SAEHMI-1MM5 5/8 SAE

The indicator element, centered within the eyepiece, is highly sensitive to moisture and gradually changes colour in relation to changes in the system moisture content. This change will continue to take place as often as there is an increase or decrease in the system moisture content. Distinct and accurately calibrated colours in the indicator element and on the colour reference label are easily matched to indicate wet, caution and dry system moisture conditions. Only one indicator element is required for all common refrigerants.

EMERSON FLOW CONTROLS OIL FILTER DRIERAOFD 553 OIL FILTER DRIER

Order Number DescriptionAOFD 553 3/8” MFL Oil Filter Drier

AOFD is designed specifically for refrigerant systems that use POE oil. POE oil is hygroscopic in nature, which means that it attracts and absorbs water. Moisture in a closed system can produce acid and will harm the compressor. AOFD protects compressors by removing moisture and trapping contaminants. Features: Designed to clean and dry POE oil; 3/8” male flare connections for easy replacement; Large filter surface area to provide maximum filtration; Contains 100% molecular sieve XH-9 Desiccant for moisture removal; Designed to operate at a very low pressure drop; 10 micron filtration for optimum oil cleaning. Replaces AC&R S-4005

EMERSON FLOW CONTROLS OIL LEVEL CONTROLOMB

Order Number DescriptionOMB-JB1 Electronic Oil Level Control s/t ASC 24/50-60OMB-M01 Electronic Oil Level Control ANG ASC2 24/50-60OMB-ACB Adaptor (Copeland Scroll ZR)OMB-ACA Adaptor (Copeland Scroll ZF, ZS, ZB)

Compressor crankcase oil level protective control. For Copeland ZF, ZB, ZR and ZS refrigeration scroll compressors. Recommended for Copeland, Carlyle, Bitzer and other semi-hermetic compressors. Features: Self-contained unit with oil level sensor and integral solenoid to manage oil level supply. Reverse Hall-effect sensor for precise measurement of oil level and protection from sensor magnetic debris contamination. Alarm and status indication by LEDs. SPDT output contact for compressor shutdown and alarming. Easy installation by sightglass replacement. Adapters suitable for various types of scroll compressors (not required for reciprocating compressors). Signal generated by gravity based float - not prone to errors from foaming like optical sensors. Debris retention magnet for reliable operation. UL Recognized. Fluorescent floating ball. Integral sight glass.


24

PILOT-OPERATED - NO MANUAL STEMInches Refrigerant Liquid Service Nominal Capacities (tons)

Order Number Connections Port Size R12 R22 R502 R134A R407C R404A/R507 200RB2T3 3/8 ODF 1/8 2 2.5 1.7 2.4 2.9 2.1200RB3T3 3/8 ODF 3/16 3 4 2.6 3.6 4.5 3.2200RB3T4 1/2 ODF 3/16 3 4 2.6 3.6 4.5 3.2

PILOT-OPERATED WITH MOUNTING STUD Inches Refrigerant Liquid Service Nominal Capacities (tons)

Order Number Connections Port Size R12 R22 R502 R134A R407C R404A/R507 200RB4T3T 3/8 ODF 1/4 3.6 5.6 3.7 4.3 5.3 3.7200RB4T4T 1/2 ODF 1/4 3.6 5.6 3.7 4.3 5.3 3.7200RB5T4T 1/2 ODF 5/16 5.3 8.2 5.4 6.4 7.8 5.4200RB5T5T 5/8 ODF 5/16 5.3 8.2 5.4 6.4 7.8 5.4200RB6T5T 5/8 ODF 3/8 6.4 10 6.5 7.7 9.5 6.5200RB4F3T 3/8 SAE 1/4 3.6 5.6 3.7 4.3 5.3 3.7200RB5F4T 1/2 SAE 5/16 5.3 8.2 5.4 6.4 7.8 5.4

PILOT-OPERATED WITH MANUAL STEM Inches Refrigerant Liquid Service Nominal Capacities (tons)

Order Number Connections Port Size R12 R22 R502 R134A R407C R404A/R507 200RB-4T3M 3/8 ODF 1/4 3.6 5.6 3.7 4.3 5.3 3.7200RB-4T4M 1/2 ODF 1/4 3.6 5.6 3.7 4.3 5.3 3.7200RB-5T4M 1/2 ODF 5/16 5.3 8.2 5.4 6.4 7.8 5.4200RB-5T5M 5/8 ODF 5/16 5.3 8.2 5.4 6.4 7.8 5.4200RB-6T5M 5/8 ODF 3/8 6.4 10 6.5 7.7 9.5 6.5200RB-4F3M 3/8 SAE 1/4 3.6 5.6 3.7 4.3 5.3 3.7

EMERSON FLOW CONTROLS SOLENOID VALVES100RB, 200RB SERIES SOLENOID VALVES2-WAY NORMALLY CLOSED FOR LIQUID OR DISCHARGE GAS SERVICE

DIRECT-ACTING - NO MANUAL STEM Inches Refrigerant Liquid Service Nominal Capacities (tons)

Order Number Connections Port Size R12 R22 R-502 R134A R407C R404A/R507 100RB2F2 1/4 SAE 7/64 0.8 1.27 0.85 0.96 1.21 0.85100RB2F3 3/8 SAE 7/64 0.8 1.27 0.85 0.96 1.21 0.85100RB2S2 1/4 ODF 7/64 0.8 1.27 0.85 0.96 1.21 0.85100RB2S3 3/8 ODF 7/64 0.8 1.27 0.85 0.96 1.21 0.85100RB2S4 1/2 ODF 7/64 0.8 1.27 0.85 0.96 1.21 0.85

Valve operates in any position, can be conveniently located in horizontal or vertical lines. One coil fits all valve sizes. Space-saving integral junction box and coil housing saves cost of handy box connections. Snap-on coil retainer, easy to install and remove. Coil assembly is replaceable without shut-down of line pressure. Long-life molded coils with class F insulations provide water, shock and vibration protection in coil winding.

REPLACEMENT PARTS FOR AMI MOISTURE-LIQUID INDICATORSAMI-2 SERIESOrder Number DescriptionPS1525-2 “O” Ring X-12978-1 Lens assembly kit (lens, lens cap and “O” ring)

Order Number Size (in) AMI-2S11 1 3/8 ODMAMI-2S13 1 5/8 ODMAMI-2S17 2 1/8 ODM

EMERSON FLOW CONTROLS MOISTURE INDICATORSAMI SERIES HERMETIC MOISTURE-LIQUID INDICATORSAMI-2 SERIES


25

WITH MANUAL STEM Inches Refrigerant Liquid Service Nominal Capacities (tons)

Order Number Connections Port Size R12 R134A R22 R407C R404A/R507 R502 240RA8T5-M 5/8 ODF 1/2 10.1 12.1 15.6 14.8 10.3 10.3240RA8T7-M 7/8 ODF 1/2 10.1 12.1 15.6 14.8 10.3 10.3240RA9T5-M 5/8 ODF 9/16 15 18 23.3 22.1 15.3 15.3240RA9T7-M 7/8 ODF 9/16 19.7 23.6 30.5 29 21 20.1240RA9T9-M 1 1/8 ODF 9/16 19.7 23.6 30.5 29 21 20.1240RA12T7-M 7/8 ODF 3/4 22.6 27.1 34.9 33.2 23 23240RA12T9-M 1 1/8 ODF 3/4 22.6 27.1 34.9 33.2 23 23240RA16T9-M 1 1/8 ODF 1 37.5 45 58 55.2 38.3 38.3240RA16T11-M 1 3/8 ODF 1 37.5 45 58 55.2 38.3 38.3240RA20T11-M 1 3/8 ODF 1 1/4 59.1 70.9 95.4 90.8 65.7 65.7240RA20T13-M 1 5/8 ODF 1 1/4 59.1 70.9 95.4 90.8 65.7 65.7240RA20T17-M 2 1/8 ODF 1 1/4 59.1 70.9 95.4 90.8 65.7 65.7

EMERSON FLOW CONTROLS SOLENOID VALVES240RA SERIES SOLENOID VALVES2-WAY NORMALLY CLOSED FOR LIQUID, SUCTION OR DISCHARGE GAS

WITH PROVISION FOR MOUNTING BRACKET, LESS MANUAL STEM

There is no additional charge for extended ends of the 240 series. Can be brazed into the line without disassembly. Will operate on suction gas as well as liquid and hot discharge gas. Available with coil or without coil. (One coil fits all valve sizes. Class F molded coil is standard.) Extended tubes are 100% copper.

Inches Refrigerant Liquid Service Nominal Capacities (tons)Order Number Connections Port Size R12 R134A R22 R407C R404A/R507 R502 240RA8T5-T 5/8 ODF 1/2 10.1 12.1 15.6 14.8 10.3 10.3240RA8T7-T 7/8 ODF 1/2 10.1 12.1 15.6 14.8 10.3 10.3240RA9T5-T 5/8 ODF 9/16 15 18 23.3 22.1 15.3 15.3240RA9T7-T 7/8 ODF 9/16 19.7 23.6 30.5 29 21 20.1240RA9T9-T 1 1/8 ODF 9/16 19.7 23.6 30.5 29 21 20.1240RA12T7-T 7/8 ODF 3/4 22.6 27.1 34.9 33.2 23 23240RA12T9-T 1 1/8 ODF 3/4 22.6 27.1 34.9 33.2 23 23240RA16T9-T 1 1/8 ODF 1 37.5 45 58 55.2 38.3 38.3240RA16T11-T 1 3/8 ODF 1 37.5 45 58 55.2 38.3 38.3240RA20T11-T 1 3/8 ODF 1 1/4 59.1 70.9 95.4 90.8 65.7 65.7240RA20T13-T 1 5/8 ODF 1 1/4 59.1 70.9 95.4 90.8 65.7 65.7240RA20T17-T 2 1/8 ODF 1 1/4 59.1 70.9 95.4 90.8 65.7 65.7

SOLENOID VALVE COILS

Order Number Configuration Voltage (Vdc) Lead Length (in)AMF12DC Open frame 12 18AMG12DC Junction box 12 6AMG24V Junction box 24 6AMG-120V Junction box 120 6AMG-120-240V Junction box 120 - 240 6AMG-208/240V Junction box 208 - 240 6

All Solenoids and Regulators can use any AM or DM Series coil except 3021R Series, M Series, DS 2184 Series. High temperature applications require an AHG or Ahc coil.

KG SERIES GASKET KITS FOR VALVES

Order Number Catalogue Number For ValveKG10025 49190 200RB KG10028 54356 240RAKG10041 54812 100RB

Consists of all necessary gaskets.


26

EMERSON FLOW CONTROLS SOLENOID VALVESKS SERIES REPAIR KITS FOR SOLENOID VALVESOrder Number Description KS30066 240RA8, manual stem kitKS30067 240RA9, 12 manual stem kitKS30068 240RA16 manual stem kitKS30098 240RA20 manual stem kit KS30112 100RB repair kit: enclosing tube, collar, snap cap, service tool, enclosure tube “O’ ring, body gasket KS30115 200RB repair kit: enclosing tube assembly, enclosing tube “O’ ring, snap cap KS30117 200RB, manual stem kitKS30293 200RB bi-flow Repair kitKS30321 240RA 8 Repair kitKS30322 240RA 9 Repair kitKS30323 240RA 12 Repair kitKS30324 240RA 16 Repair kitKS30325 240RA 20 Repair kit

185 PSI CONDENSING PRESSURE SET POINT (R22)

Order Number Connections (in) Condensing Pressure Set Point (psi)HP5T4-185 1/2 ODF 185HP8T4-185 1/2 ODF 185HP8T5-185 5/8 ODF 185HP8T7-185 7/8 ODF 185HP14T7-175 7/8 ODF 175HP14T9-175 1 1/8 ODF 175HP14T11-175 1 3/8 ODF 175

INDUSTRIAL SOLENOIDS

Inches MOPD^ Maximum ACOrder Number Pipe Size Port Size AC DC Cv Fluid Temperature* (°F)204CD1/4B1/8B 1/4 1/8 150 175 .34 180204CD1/4B3/64B 1/4 3/64 950 500 .05 180204CD1/4B1/4B 1/4 1/4 20 10 0.7 180210CA1/2B5/8B 1/2 5/8 150 - 3.6 180210CA3/4B3/4B 3/4 3/4 125 - 5.5 180211CA1/2B5/8P 5/8 5/8 100 - - 250211CA3/4B3/4P 3/4 3/4 100 - - 250* With an ambient temperature of 77°F^ Maximum operating pressure differential

For use with air, water and steam. 2-way normally closed.

EMERSON FLOW CONTROLS HEAD PRESSURE CONTROLSHP SERIES HEAD PRESSURE CONTROL VALVESDEVELOPED TO MAINTAIN PROPER CONDENSER PRESSURES DURING PERIODS OF LOW OUT-DOOR AMBIENT CONDITIONSMaintains adequate condensing pressures to ensure proper system operation. Without proper control of condensing pressure, serious consequences in the way of poor refrigeration and component damage can occur. HP series offers an efficient and economical approach to this problem on air cooled condensers.

Order Number Connections (in) Condensing Pressure Set Point (psi)HP5T4-110 1/2 ODF 110HP8T4-110 1/2 ODF 110HP8T5-110 5/8 ODF 110HP8T7-110 7/8 ODF 110HP14T7-110 7/8 ODF 110HP14T9-110 1 1/8 ODF 110HP14T11-110 1 3/8 ODF 110

110 PSI CONDENSING PRESSURE SET POINT (R12/R134A)


27

HEAD PRESSURE CONTROL CAPACITIESR12

Tons @ Pressure Drop - PSIValve 1 2 3 4 5HP5 1.7 2.4 3 3.4 3.8HP8 4.6 6.5 8 9.2 10.3HP14 11.7 16.5 20.2 23.6 26.4

R134A

Tons @ Pressure Drop - PSIValve 1 2 3 4 5HP5 2 2.9 3.6 4.1 4.6HP8 5.5 7.8 9.6 11 12.4HP14 14 19.8 24.2 28.3 31.7

R22 Tons @ Pressure Drop - PSI

Valve 1 2 3 4 5HP5 2.2 3.2 3.9 4.5 5HP8 6 8.5 10.5 12 13.5HP14 14.7 20.8 25.6 29.7 33.8

R404A/R507

Tons @ Pressure Drop - PSIValve 1 2 3 4 5HP14 10.1 14.3 17.6 20.5 23HP5 1.5 2.1 2.6 3 3.3HP8 3.9 5.5 6.7 7.8 8.7

Order Number Connections (in) Condensing Pressure Set Point (psi)HP5T4-215 1/2 ODF 215HP8T5-215 5/8 ODF 215HP8T7-215 7/8 ODF 215HP14T7-215 7/8 ODF 215HP14T11-215 1 3/8 ODF 215

EMERSON FLOW CONTROLS HEAD PRESSURE CONTROLSHP SERIES HEAD PRESSURE CONTROL VALVESDEVELOPED TO MAINTAIN PROPER CONDENSER PRESSURES DURING PERIODS OF LOW OUT-DOOR AMBIENT CONDITIONS215 PSI CONDENSING PRESSURE SET POINT (404A/R507)

HPC SERIES MODULATING HEAD PRESSURE CONTROL VALVES

Order Number Connections (in) Pressure Set Point HPC2T4125 1/2 ODF 125HPC2T4180 1/2 ODF 180HPC3T4125 1/2 ODF 125HPC3T4180 1/2 ODF 180HPC5T3170 3/8 ODF 170HPC5T3225 3/8 ODF 225HPC5T4100 1/2 ODF 100HPC5T4125 1/2 ODF 125HPC5T4180 1/2 ODF 180HPC5T4200 1/2 ODF 200

Developed specifically to maintain liquid subcooling and prevent liquid line flash gas. Maintains adequate condensing pressure, serious consequences in the way of poor refrigeration and component damage can occur. HPC Series offers an efficient and economical approach to this problem on air cooled condensers.


28

HPC-3 VALVE Nominal Capacity Table (tons) Pressure Drop - PSI

Order Number 1 2 3 4 5R134A 1.7 2.4 3 3.5 3.9R22 1.88 2.65 3.25 3.75 4.19R404A 1.25 1.77 2.17 2.51 2.8R507 1.25 1.77 2.17 2.51 2.8

HPC-5 VALVE Nominal Capacity Table (tons) Pressure Drop - PSI

Order Number 1 2 3 4 5R134A 2.24 3.17 3.88 4.48 5R22 2.43 3.43 4.2 4.86 5.43R404A 1.62 2.29 2.81 3.25 3.63R507 1.62 2.29 2.81 3.25 3.63

Nominal Capacity Table (tons) Pressure Drop - PSIOrder Number 1 2 3 4 5R134A 1 1.4 1.8 2 2.3R22 1.1 1.6 1.9 2.2 2.5R404A 0.7 1 1.3 1.5 1.7R507 0.7 1 1.3 1.5 1.7

EMERSON FLOW CONTROLS HEAD PRESSURE CONTROLSHPC-2 VALVE

EMERSON FLOW CONTROLS REGULATORSESR ELECTRONIC STEPPER REGULATOR

Nominal Capacity (tons)Order Number R134a R22 R507/R404A R12 R407 R502 ESR-12 5.3 5.8 5.7 4.8 7.9 7.8ESR-20 10.3 13.4 11.0 9.5 15.1 15.1

The ESR is a direct driven suction regulator that uses a linear actuating bi-polar stepper motor to move the piston. The stepper motor is actuated by a voltage pulse to energize each of the motor phases and move the piston in discrete .001 inch increments. When used as an EPR in individual supermarket display cases, the ESR, along with appropriate control electronics, provides state-of-the-art temperature control within less than ± 1°F of the desired setpoint temperature. The ESR is compatible with many control electronics widely available in the market today. Applications for the ESR include case control, line-up and rack mounted control, as well as transportation applications on refrigerated trucks, trailers and containers. ESRs are also acceptable for use as hot gas bypass and head pressure, liquid hold-back valves. An ESR may NOT be used as an expansion device.


29

EPRB(S) UPSTREAM EVAPORATOR PRESSURE REGULATORS WITH SUCTION STOPNominal Capacity (tons)

Order Number Port Size (in) Connections ODF (in) R12 R134A R22 R407C R507/R04A R502EPRB12T9 3/4 1 1/8 2.9 3.41 4.47 5.1 3.77 3.5EPRB16T11 1 1 3/8 5.3 6 7.88 8.3 6.64 6.2EPRB20T13 1 1/4 1 5/8 8.4 11.19 14.7 15.5 12.39

EMERSON FLOW CONTROLS REGULATORSCPH DIRECT OPERATED HOT GAS BYPASS REGULATORS

Nominal Capacity (tons)Order Number R12 R134A R22 R407C R507/R404A R502 CPHE1 0.4 0.5 0.7 0.7 0.7 0.6CPHE2 0.7 0.8 1.2 1.2 1.2 1.0CPHE3 1.2 1.6 2.3 2.3 2.2 2CPHE4 3 3.8 5.5 5.5 5.3 4.8CPHE5 3.6 4.5 6.7 6.7 6.4 5.8CPHE6 4.6 5.8 8.5 8.5 8.2 7.4

Type CPH regulators offer significant features: “Take-apart” construction which allows easy serviceability without removing the body flange from the line, stainless steel diaphragm and a contoured power element, and the unique “U” gland packing material which eliminates stem friction and packing leaks. Types CPHE 3 thru 6 use a balanced double-ported cage assembly. Vacuum service obtainable by counterclock adjustment of side mounted adjusting screw. Direct operated regulators are furnished with an adjustment range of 0-80 psig. A 1/4” SAE male flare external equalizer is standard.

1. Change letter “B” to “A” for Internally Equalized Valve.

DGR(E) AND EGR(E) DIRECT ACTING HOT GAS BYPASS REGULATORS

Nominal Capacity (tons)Order Number Connections R12 R134A R22 R407C R507/R04A R502EGRE-4S4C 1/2 ODF 1.6 1.8 2.9 2.9 2.8 2.6EGRE-4S5C 5/8 ODF 1.6 1.8 2.9 2.9 2.8 2.6EGRE-6S4C 1/2 ODF 2.0 2.4 3.8 3.8 3.5 2.9EGRE-6S5C 5/8 ODF 2.0 2.4 3.8 3.8 3.5 2.9EGRE-8S5C 5/8 ODF 3.6 4.2 6.7 6.7 6.3 5.9DGRE-12S7B 7/8 ODF 8.3 9.7 15.4 15.4 14.5 13.6DGRE-12S9B 1 1/8 ODF 8.3 9.7 15.4 15.4 14.5 13.6

Designed specifically for use on residential and light commercial systems; providing precision system capacity balance at an economical price. Features: Compact hermetic construction; contoured power assembly for long life; adjustment range of 0-80 psig; safe working pressure: 400 psig; UL listed. Supplied with a factory set point of 50 psig, which can be changed by adjustment. Capacity of these regulators is based on 6 degree gradient. Rated capacity will be attained when the suction pressure falls 6 degrees below the corresponding set point saturation temperature. When the suction pressure decreases below the set point, the regulator opens and allows discharge gas to be bypassed. The discharge gas may be passed into evaporator or the suction line. When bypassed to the suction line, a liquid injection Thermo Valve must be installed to properly desuperheat the suction gas returning to the compressor.

EPRB(S) UPSTREAM EVAPORATOR PRESSURE REGULATORS

Nominal Capacity (tons)Order Number Port Size (in) Connections ODF (in) R12 R134A R22 R407C R507/R04A R502EPRB12T9 3/4 1 1/8 2.9 3.41 4.47 5.1 3.77 3.5EPRB16T11 1 1 3/8 5.3 6 7.88 8.3 6.64 6.2EPRB20T13 1 1/4 1 5/8 8.4 11.19 14.7 15.5 12.39

Lightweight, energy-efficient pilot operated regulator. It is supplied with copper connections to allow easy installation into the system. The pilot operation is dependent upon high side system pressure which minimizes the pressure drop across the regulator. This regulator is of normally-open construction so that a manual operator is not required for system evacuation.


30

NOMINAL CAPACITY IN TONSValve R12 R134A R22 R407C R507/R404A R502IPR-6 0.8 0.94 1.2 1.3 1.11 9.4IPR-10 2.0 2.2 3.0 3.2 2.5 2.2

EMERSON FLOW CONTROLS REGULATORSIPR SERIES INLET PRESSURE REGULATORS

Order Number Connections (in) Operating Range (psig) Dimensions (in)IPR-6 0-50 PSI - 5/8” 5/8 ODF 0 - 50 9 3/4 x 5 1/4IPR-6 30-100 PSI - 7/8” 7/8 ODF 30 - 100 9 3/4 x 5 1/4IPR-6 30-100 PSI - 5/8” 5/8 ODF 30 - 100 9 3/4 x 5 1/4IPR-6 65-225 PSI - 5/8” 5/8 ODF 65/225 9 3/4 x 5 1/4IPR-6 0-50 PSI - 7/8” 7/8 ODF 0 - 50 9 3/4 x 5 1/4IPR-6 65-225 PSI - 7/8” 7/8 ODF 65/225 9 3/4 x 5 1/4IPR-6 0-50 PSI - 1 1/8” 1 1/8 ODF 0 - 50 9 3/4 x 5 1/4IPR-6 30-100 PSI - 1 1/8” 1 1/8 ODF 30 - 100 9 3/4 x 5 1/4IPR-10 0-50 PSI -7/8” 7/8 ODF 0 - 50 11 3/16 x 5 11/16IPR-10 30-100 PSI - 7/8” 7/8 ODF 30 - 100 11 3/16 x 5 11/16IPR-10 0-50 PSI - 1 1/8” 1 1/8 ODF 0 - 50 11 3/16 x 5 11/16IPR-10 30-100 PSI - 1 1/8” 1 1/8 ODF 30 - 100 11 3/16 x 5 11/16IPR-10 65-225 PSI - 1 1/8” 1 1/8 ODF 65/225 11 3/16 x 5 11/16IPR-10 0-50 PSI - 1 3/8” 1 3/8 ODF 0 - 50 11 3/16 x 5 11/16IPR-10 30-100 PSI - 1 3/8” 1 3/8 ODF 30 - 100 11 3/16 x 5 11/16IPR-10 65-225 PSI - 1 3/8” 1 3/8 ODF 65/225 11 3/16 x 5 11/16

IPR Upstream Evaporator Pressure Regulators accurately maintain a predetermined minimum evaporator inlet pressure, regardless of sudden load or suction pressure changes. These valves operate from an inlet pressure signal, opening on a rise in pressure above the valve set point and closing at any inlet pressure below the set point. The IPR is a hermetic valve supplied with a pressure tap in the inlet connection as standard.

OPR SERIES OUTLET PRESSURE REGULATORS

Order Number Connections (in) Operating Range (psig)OPR-6 0-60PSI 5/8 5/8 ODF 0 - 60OPR-6 50-130PSI 5/8 5/8 ODF 50 - 130OPR-6 100-230 5/8 5/8 ODF 100 - 230OPR-6 0-60PSI 7/8 7/8 ODF 0 - 60OPR-6 50-130PSI 7/8 7/8 ODF 50 - 130OPR-6 100-230 7/8 7/8 ODF 100 - 230OPR-6 0-60PSI 1-1/8 1 1/8 ODF 0 - 60OPR-10 0-60PSI 7/8 7/8 ODF 0 - 60OPR-10 50-130PSI 7/8 7/8 ODF 50 - 130OPR-10-100-230PSI-7/8 7/8 ODF 100 - 230OPR-10 0-60PSI 1-1/8 1 1/8 ODF 0 - 60OPR-10 50-130PSI 1-1/8 1 1/8 ODF 50 - 130OPR-10-100-230PSI-1/8 1 1/8 ODF 100 - 230OPR-10 0-60PSI 1-3/8 1 3/8 ODF 0 - 60OPR-10 50-130PSI 1-3/8 1 3/8 ODF 50 - 130OPR-10 100-230PSI 1-3/8 1 3/8 ODF 100 - 230OPR-10 100-230PSI 1-3/8 1 3/8 ODF 100 - 230OPR-10 100-230PSI 1-3/8 1 3/8 ODF 100 - 230OPR-10 100-230PSI 1-3/8 1 3/8 ODF 100 - 230

OPR Series Downstream Pressure Regulators accurately maintain a predetermined maximum outlet pressure. Designed to prevent compressor motor overload, the OPR is a hermetic valve supplied with a pressure tap in the inlet connection as standard.


31

EMERSON FLOW CONTROLS REGULATORSR12 - SUCTION GASOPR-6 EXTENDED CAPACITY

1/2 PSI Drop 1 PSI Drop 2 PSI DropEvaporator

Temperature °FSaturated Suction

Pressure PSIG 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 6030 28.5 0.27 0.48 .068 0.89 0.63 0.67 0.96 1.25 0.50 0.91 1.32 1.7420 21.1 0.38 0.57 0.75 0.93 0.53 0.79 1.05 1.30 0.71 1.08 1.45 1.8210 14.7 0.28 0.44 0.61 0.77 0.83 0.38 0.62 0.85 1.08 1.17 0.50 0.84 1.17 1.49 1.610 9.2 0.18 0.33 0.47 0.62 0.74 0.74 0.24 0.45 0.65 0.86 1.03 1.03 0.30 0.60 0.88 1.18 1.41 17.85

-10 4.5 0.22 0.35 0.47 0.60 0.64 0.64 0.29 0.47 0.65 0.83 0.90 0.90 0.38 0.63 0.88 1.14 1.23 1.05

R22 - SUCTION GASOPR-6 EXTENDED CAPACITY



Pressure PSIG 10 20 30 40 50 60 10 20 30 40 50 60 20 30 40 50 6030 54.9 0.53 0.74 1.0120 43.1 0.53 0.80 0.74 1.12 1.01 1.5510 32.8 0.47 0.72 0.97 0.66 1.01 1.37 0.90 1.40 1.900 24 0.40 0.62 0.84 1.06 0.55 0.86 1.18 1.49 0.75 1.19 1.63 2.07

-10 16.5 0.30 0.49 0.69 0.88 1.00 0.41 0.69 0.97 1.24 1.41 0.55 0.95 1.33 1.73 1.94-20 10.2 0.38 0.55 0.72 0.88 0.88 0.51 0.76 1.01 1.24 1.24 1.70 1.70-40 0.6 0.27 0.41 0.55 0.67 0.67 0.67 0.38 0.57 0.76 0.93 0.93 0.93 1.27 1.27

OPR-10 EXTENDED CAPACITY1/2 PSI Drop 1 PSI Drop 2 PSI Drop

Evaporator Temperature °F

Saturated Suction Pressure PSIG 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60

30 54.9 1.80 0.98 1.38 1.9320 43.1 1.20 2.92 1.69 4.13 2.38 5.8310 32.8 1.11 2.67 2.73 1.58 4.04 3.85 2.22 5.31 5.440 24 0.83 2.22 2.44 2.44 1.17 3.13 3.44 3.44 1.65 4.41 4.86 4.86

-10 16.5 0.43 1.66 2.17 2.17 2.17 0.61 2.34 3.07 3.07 3.07 0.84 3.31 4.32 4.32 4.32-20 10.2 1.07 1.92 1.92 1.92 1.92 1.50 2.71 2.71 2.71 2.71 2.11 3.81 3.81 3.81 3.81-40 0.6 0.79 1.47 1.47 1.47 1.47 1.47 1.11 2.08 2.08 2.08 2.08 2.08 1.55 2.92 2.92 2.92 2.92 2.92



Pressure PSIG 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 6030 28.5 0.20 1.48 2.26 2.26 0.28 2.09 3.19 3.19 0.39 2.94 4.49 4.4920 21.1 1.03 2.02 2.02 2.02 1.45 2.86 2.86 2.86 2.04 4.02 4.02 4.0210 14.7 0.55 1.58 1.80 1.80 1.80 0.78 2.23 2.54 2.54 2.54 1.08 3.12 3.58 3.58 3.580 9.2 0.08 0.99 1.60 1.60 1.60 1.60 0.11 1.39 2.25 2.25 2.25 2.25 0.14 1.94 3.17 3.17 3.17 3.17

-10 4.5 0.44 1.24 1.41 1.41 1.41 1.41 0.62 1.74 1.98 1.98 1.98 1.98 0.86 2.45 2.75 2.78 2.78 2.78

OPR-10 EXTENDED CAPACITY


32

R404A - SUCTION GASOPR-6 EXTENDED CAPACITY



Pressure PSIG 20 30 40 50 60 20 30 40 50 60 20 30 40 50 6020 55.7 0.38 0.53 0.7110 43.5 0.40 0.58 0.55 0.82 0.76 1.130 33 0.35 0.54 0.70 0.47 0.75 0.99 0.65 1.04 1.37

-10 24 0.28 0.44 0.61 0.76 0.39 0.62 0.85 1.06 0.54 0.85 1.19 1.47-20 16.3 0.21 0.35 0.48 0.63 0.70 0.29 0.48 0.68 0.89 0.98 0.39 0.66 0.93 1.23 1.37




Pressure PSIG 20 30 40 50 60 20 30 40 50 60 20 30 40 50 6020 52.5 0.88 0.42 0.59 0.82 0.8210 41 0.40 0.60 0.57 0.84 1.16 1.160 31.1 0.36 0.53 0.69 0.49 0.74 0.98 0.67 1.35 1.35

-10 22.6 0.29 0.44 0.59 0.74 0.40 0.62 0.83 1.04 0.55 0.84 1.44 1.44-20 15.3 0.22 0.35 0.48 0.61 0.67 0.29 0.48 0.67 0.85 0.93 0.39 0.65 0.92 1.29 1.29



Pressure PSIG 20 30 40 50 60 20 30 40 50 60 20 30 40 50 6020 52.5 2.24 1.02 1.45 2.04 2.0410 41 1.08 2.11 1.53 2.99 4.22 4.220 31.1 0.96 1.87 1.87 1.34 2.65 2.65 1.89 3.74 3.74

-10 22.6 0.70 1.64 1.65 1.65 0.99 2.31 2.33 2.33 1.39 3.27 3.29 3.29-20 15.3 0.39 1.21 1.45 1.45 1.45 0.55 1.70 2.05 2.05 2.05 0.77 2.40 2.88 2.88 2.88





30 26.1 0.57 2.01 2.53 2.53 0.80 2.84 3.59 3.59 1.12 4.00 5.05 5.0520 18.1 0.21 1.48 2.24 2.24 2.24 0.28 2.08 3.17 3.17 3.17 0.39 2.93 4.46 4.46 4.4610 12 0.90 1.97 1.97 1.97 1.97 1.27 2.78 2.78 2.78 2.78 1.79 3.93 3.93 3.93 3.930 6.5 0.35 1.32 1.72 1.72 1.72 1.72 0.48 1.87 2.44 2.44 2.44 2.44 0.66 2.63 3.42 3.42 3.42 3.42

-10 2 0.68 1.50 1.50 1.50 1.50 1.50 0.97 2.12 2.12 2.12 2.12 2.12 1.34 2.97 2.97 2.97 2.97 2.97

EMERSON FLOW CONTROLS REGULATORSR134A - SUCTION GASOPR-6 EXTENDED CAPACITY



Pressure PSIG 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 6030 26.1 0.37 0.59 0.82 1.06 0.50 0.83 1.16 1.48 0.67 1.13 1.60 2.0620 18.4 0.27 0.47 0.68 0.88 1.04 0.37 0.66 0.95 1.24 1.45 0.49 0.89 1.30 1.71 2.0210 12 0.36 0.54 0.71 0.89 0.91 0.48 0.75 1.00 1.25 1.27 0.65 1.00 1.37 1.72 1.750 6.5 0.23 0.39 0.55 0.70 0.80 0.80 0.32 0.54 0.77 0.99 1.10 1.10 0.40 0.71 1.03 1.34 1.52 1.52

-10 2 0.26 0.40 0.54 0.67 0.68 0.68 0.36 0.55 0.75 0.96 0.96 0.96 0.45 0.72 1.00 1.27 1.30 1.30


33

EMERSON FLOW CONTROLS REGULATORSOPR-10 EXTENDED CAPACITY



Pressure PSIG 20 30 40 50 60 20 30 40 50 60 20 30 40 50 6020 55.7 0.60 0.84 1.1810 43.5 0.92 2.09 1.30 2.96 1.84 4.170 33 0.80 2.01 2.01 1.12 2.82 2.82 1.59 3.99 3.99

-10 24 0.61 1.59 1.75 1.75 0.85 2.25 2.47 2.47 1.20 3.16 3.49 3.49-20 16.3 0.32 1.19 1.52 1.52 1.52 0.48 1.67 2.14 2.14 2.14 0.62 2.35 3.02 3.02 3.02

R407C - SUCTION GASOPR-6 EXTENDED CAPACITY



Pressure PSIG 20 30 40 50 60 20 30 40 50 60 20 30 40 50 6030 63.1 0.53 0.74 1.0120 51.6 0.53 0.80 0.74 1.12 1.01 1.5510 41.8 0.47 0.72 0.97 0.66 1.01 1.37 0.90 1.40 1.900 33.6 0.40 0.62 0.84 1.06 0.55 0.86 1.18 1.49 0.75 1.19 1.63 2.07

-10 26.7 0.30 0.49 0.69 0.88 1.00 0.41 0.69 0.97 1.24 1.41 0.55 0.95 1.33 1.73 1.94




Pressure PSIG 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 6010 46.2 0.32 0.53 0.44 0.75 0.61 1.030 35.2 0.30 0.47 0.66 0.42 0.66 0.92 0.57 0.91 1.29

-10 25.8 0.25 0.41 0.57 0.72 0.35 0.57 0.79 1.02 0.47 0.79 1.09 1.42-20 17.8 0.33 0.46 0.60 0.69 0.45 0.65 0.84 0.98 0.62 0.89 1.16 1.35-40 5.5 0.16 0.26 0.37 0.46 0.51 0.51 0.22 0.37 0.50 0.65 0.71 0.71 0.27 0.48 0.68 0.89 0.98 0.98




10 46.2 0.46 1.79 0.66 2.52 0.92 3.470 35.2 0.55 1.64 1.97 0.77 2.31 2.79 1.08 3.26 3.94

-10 25.8 0.41 1.40 1.73 1.73 0.58 1.97 2.45 2.45 0.81 2.78 3.45 3.45-20 17.8 1.04 1.51 1.51 1.51 1.47 2.13 2.13 2.13 2.07 3.00 3.00 3.00-40 5.5 0.28 0.92 1.11 1.11 1.11 1.11 0.39 1.30 1.58 1.58 1.58 1.58 0.55 1.84 2.22 2.22 2.22 2.22



Pressure PSIG 20 30 40 50 60 20 30 40 50 60 20 30 40 50 6030 63.1 0.98 1.38 1.9320 51.6 1.20 2.92 1.69 4.13 2.38 5.8310 41.8 1.11 2.67 2.73 1.58 4.04 3.85 2.22 5.31 5.440 33.6 0.83 2.22 2.44 2.44 1.17 3.13 3.44 3.44 1.65 4.41 4.86 4.86

-10 26.7 0.43 1.66 2.17 2.17 2.17 0.61 2.34 3.07 3.07 3.07 0.84 3.31 4.32 4.32 4.32



34

R12 / R134A R407C / R22 R502 / R404A / R507Pressure Drop Across Valve - PSI

Order Number 60 100 100 Connections (in)ACP(E)1 0.31 0.44 0.29 1/4 x 3/8 ODF ACP(E)2 0.41 0.57 0.38 1/4 x 3/8 SAE ACP(E)3 0.65 0.91 0.61 1/4 x 3/8 ODF ACP(E)4 0.90 1.30 0.87 1/4 x 3/8 ODF ACP(E)5 1.40 1.96 1.31ACP(E)6 1.90 2.67 1.78ACP(E)7 2.30 3.28 2.19ACP(E)8 2.70 3.75 2.50ACP(E)9 3.80 5.32 3.55

EMERSON FLOW CONTROLS REGULATORSACP SERIES AUTOMATIC CONSTANT PRESSURE REGULATORSDirect acting, hot gas bypass regulator is designed for small capacity systems. Features: Small, compact size adapts to any installation; Friction-free floating design; Fully adjustable from 0-80 psig (factory setting 40 psig)

EMERGENCY SERVICE CONTACT INFORMATIONISC Partner Email ISC Partner Email

Calgary: 403.214.2134Dene Flahr [email protected] Vince Larsen [email protected] Cegielnik [email protected] Joe McIntyre [email protected] Grieve [email protected] Jeff Weber [email protected] Iwaskiw [email protected]

Edmonton: 780.451.4744Brian Pampu [email protected] Miles Nelson [email protected] Ade [email protected] Cliff Osadchuk [email protected] Arts [email protected] Dale Werner [email protected] Kuhn [email protected] Mike Wieschorster [email protected]

Burnaby: 604.298.4472Glenn McCullough [email protected] Tom Newmark [email protected] Andres [email protected] Jerry Schaab [email protected] Kishore [email protected] Marcel Silberman [email protected] McCollum [email protected] Brian Yi [email protected] Monts [email protected]

Saskatchewan: 306.373.9227Don Faris [email protected]

Kitchener: 519.748.0961Ken Desrosier [email protected] Tom Grant [email protected] Antunes [email protected] Terri-Lynn McNeil [email protected] Cushing [email protected] Sam Otaki [email protected]

St. Catharines: 905.988.1724Dave Sevcik [email protected] Brandon Keel [email protected] Dougall [email protected] Jeff Zimmerman [email protected] Garrett [email protected]

Windsor: 519.251.9925Tim Reid [email protected] Bill Pratt [email protected] Copeman [email protected]

Ottawa: 613.742.0083Alain Brunet [email protected] Robert Lantaigne [email protected] Aivaliotis [email protected] Jonathan Ritchot [email protected]

North Bay: 705.476.0800Ray Spencer [email protected] Mark Spencer [email protected] Audette [email protected]

Headquarters: 604.298.4463Keith Werner [email protected] Johann Russell [email protected] Feedham [email protected] Rudy Wieschorster [email protected] Newstead [email protected]

BURNABY, BC3030 Beta Avenue

Burnaby, BC V5G 4K424 HR Ph: (604) 298.4472

BC Toll Free: 1.877.778.1818YVR Island Toll: 1.866.886.8858Interior BC Toll: 1.866.950.4853

Fax: (604) 298.4288

KITCHENER, ON186 Shoemaker StreetKitchener, ON N2E 3E1

24 HR Ph: (519) 748.0961Toll Free: 1.866.300.4300

Fax: (519) 748.2068

CALGARY, AB2280 Portland Street SE

Calgary, AB T2G 4M624 HR Ph: (403) 214.2134Toll Free: 1.877.212.2822

Fax: (403) 214.2139

ST. CATHARINES, ONUnits 4, 5 & 6, 27 Seapark Drive

St. Catharines, ON L2M 6S524 HR Ph: (905) 988.1724

Fax: (905) 988.5722

EDMONTON, AB11418 - 120 Street

Edmonton, AB T5G 2Y224 HR Ph: (780) 451.4744Toll Free: 1.877.969.9979

Fax: (780) 454.1072

WINDSOR, ONUnit 200, 3215 Jefferson Blvd

Windsor, ON N8T 2W724 HR Ph: (519) 251.9925Toll Free: 1.866.282.4472

Fax: (519) 251.9930

SASKATCHEWAN24 HR Ph: (306) 373.9227Toll Free: 1.877.969.9979

Fax: (306) 374.7911

OTTAWA, ONUnits 1-4, 1550 Liverpool Court

Ottawa, ON K1B 4L224 HR Ph: (613) 742.0083Toll Free: 1.866.896.4439

Fax: (613) 742.0084

HEADQUARTERSPh: (604) 298.4463Fax: (604) 205.7162

NORTH BAY, ONUnit N, 600 Gormanville Road

North Bay, ON P1B 9S724 HR Ph: (705) 476.0800Toll Free: 1.888.266.1955

Fax: (705) 476.2210www.isc.tv

Date post:	18-Apr-2015
Category:	Documents
Upload:	jaime-e-marrero
View:	487 times
Download:	2 times

Emerson Flow Control Valves

Documents