7
100% made in Germany EMIWA ® ANJO WindPowerHeat-System
100% made in Germany
EMIWA® ANJOWindPowerHeat-System
Our products are for everyone. For the future and for energy indepen-dence.
For doers and pioneers.
At NRGSync Holding GmbH, we have made it our business to provide consumers of electricity and fossil fuels, innovative system solutions for sustainable, safe and future-oriented energy supply for buildings and public spaces.
We have developed our state-of-the-art products for everyone. Our product as a stand-alone system or in combination with existing systems such as PV, open up immeasurable possibilities for independent energy supply and heat.
The product range of our wind systems extends from hybrid street lanterns to our roof-mounted EMIWA®
ANJO to industrially usable wind system with a height of up to 50 meters and an installed power of 0.5 MW.-3.0 MW., such as our EMIWA® HIROKI.
With this brochure we would like to introduce you to the future of self-sufficient energy supply for your building. Also so-called „post-EEG PV systems“ (after the end of the EEG subsidy) can be coupled and with our systems, in order to use the energy produced energy exclusively for your building and your heat. This also applies to all PV systems, oil and gas heating systems in old and new buildings - either as an addi-tion to the existing heating system or as an add-on for energy production and self-use.
Imagine that from now on you would use all of the energy you produced yourself. You could use it to supply your building and with excess energy even heat your domestic water. How would it be, if your PV system did not feed a single kWh of energy into the public grid? Instead, it would buffer the energy produ-ced in our certified high-performance storage.
Via our intelligent inverter, the stored energy would spread out evenly over 365 days, hour after hour into your home grid. Our system would continue to produ-ce energy for you in parallel on the roof of your house. Also, in autumn, winter and spring you could use your self-generated energy and supplement the weak sunny months with our wind system.
And last but not least. Imagine that we could bring you a giant step closer to the goal of complete buil-ding self-sufficiency. It is actually possible to reduce individual consumption through the 100% use of self-produced energy via storage media and small wind turbines.
Fascinating that no one has really thought about it until today. Here we as NRGSync are very happy to be the pioneer. We can break new ground with unique, innovative systems and show you completely new pos-sibilities. In addition, we ensure with our numerous patented innovations, “made in Germany“, we provide a quality feature of which we are also a little proud. Let us surprise you and discover with us now your new possibilities.
Yours Stefan KausManaging Director of NRGSync Holding GmbH
Who we are
Profit even without direct marketing and EEG.
3 NRGSync Product description EMIWA® ANJO
The EMIWA® ANJO is a system based on state-of-the-art technologies to control the production and delive-ry of energy according to demand. It gives priority to the sources that produce energy in the cleanest and most cheapest. The basis is a 500-watt wind generator combined with a photovoltaic (PV) system. However, an existing PV system can also be integrated into the system. The aim is always to integrate PV systems into the overall system, in order to supply the building and heat.
This has decisive advantages: z Long-term contracts for direct marketing via
energy companies, which can block flexible supplier models.
z The savings in electricity costs are many times hig-her for users than the income from direct marketing, which must be additionally taxed.
EMIWA® ANJO
The EMIWA® ANJO offers every user the possibility in combination with an existing PV system a cost-effective and simple way to building self-sufficiency - including all necessary components and control units.
The wind generator consists of a high-power wind tur-bine, an external coating with photovoltaic properties, which does not require direct solar radiation and has a three-phase generator. It can be flexibly attached to the building with a mounting mast. The turbine has a torque clutch to decouple the generator if the wind speed is bigger than 400 rpm, thus protecting the system from overload.
Height (without mast) 125 cm
Width 100 cm front 120 back
Depth 130 cm
Installed power Wind: 4,3 KW PV: 4.2 KW Total: 8.5 KW
Power PV per side 240 Watt/p x 2 = 480watt/p 48 Volt
BMS / self-consumption Integrated Cell monitoring/ <4 Wh im Monat
Battery efficiency 96%
System efficiency >95 % bei 100 A
Cooling/heating/ventilation not required
Power-to-weight ratio (cell) 210 Wh / kg
Rotor + Wind deflector
Generator
PV
If your building has an additional PV system that is no longer subsidized by the EEG, it can be fully integra-ted into the system.
In order to use as much solar power as possible in the building, it is necessary to store the energy. This allows you to use electricity generated during the day as needed even after the sun goes down.
We therefore recommend that you also adjust the storage capacity and power class of the inverter accor-dingly when integrating the PV system.
You can also integrate a PV plant into the system at a later date. For example, in the event that the EMIWA® ANJO is installed before the end of the EEG subsidy for an existing PV system.
The EMIWA® ANJO detects when more electricity is produced in the building than is consumed. The charge-dischar-ge unit then receives the command to charge the lithium-ion battery with exactly the amount of electricity that would otherwise flow into the grid in excess. The stored electricity is then available again later, e.g. after sunset or when there is an increased demand for electricity for wall boxes or similar in the building.
The units of measurement given here are approximate values, which may deviate slightly due to production conditions.
D-PL-12003-01
EMIWA® ANJO Product description NRGSync 4 5 NRGSync Product description EMIWA® ANJO
EMIWA® ANJO Product description NRGSync 6 7 NRGSync Product description EMIWA® ANJO
Strong reasons for the EMIWA® ANJO:
CertificateHighlightsOur system complies with DIN 12831 in the eligible detail. In addition, we have passed the noise certifica-tion with only 31 db and more than fulfill all building code regulations. Our EMIWA® ANJO is also the only small wind turbine system which is CE and TÜV cer-tified. It fulfills all requirements according to German DIN standards and legal regulations.
z Completely silent 31db certified
z Mechanical decoupling during storm at
20 NM
z Overvoltage protection 1 under the roof
z Surge protection 2 in the energy center
z Grid-parallel feed into your building
z Complete energy center
z Grid sensor
z Separate meter
z Roof rafter bracket
z Support bar
z Incl. all cables and plug connections
z Storage battery certified according to EMV/EMC,
Suitable for residental use
z Incl. battery management system
z Either as a stand-alone system or for coupling with
your old your old PV system
z Building self-sufficiency >96% with coupling
z No bird strike
z 100% recyclable
z 100% CE certified
z 100% compliance with all DIN and EU standards
z 100% „made in Germany“
EMIWA WindkraftanlageSchallpegeluntersuchung
Schallpegeluntersuchung EMIWA Windkraftanlage 25.02.2021
UNTERSUCHUNGSERGEBNIS SCHALLDRUCKPEGELKleinwindrad 500 Watt EMIWA, Hersteller NRGSync
Die ermittelten Messergebnisse laut unserem Prüfprotokoll (Nr. 100/2021 vom25.2.2021) auf Grundlage der beschriebenen Messmethode können bezüglichEinhaltung der Immissionsrichtwerte wie folgt bewertet werden:
Umgebung GrenzwertTag
GrenzwertNacht
Wert EMIWA(mittlere Leistung/
10 m Abstand)
MaximalwertEMIWA
(10 m Abstand)
Industriegebiete 70 dB(A) 70 dB(A)
Gewerbegebiete 65 dB(A) 50 dB(A)
Wohngebiete 50 dB(A) 35 dB(A)
Der Nacht-Immissionsrichtwert von 35 dBA wird eingehalten:
• im 10m Abstand zum EMIWA im gemessenen Drehzahlbereich <130 RPM max.
• und bei Extrapolation auf 420 RMP max.
Der Tages-Immissionsrichtwert von 45 dBA wird eingehalten:
• im 1, 5, und 10 m Abstand zum EMIWA im gemessenen Drehzahlbereich <130 RPM max.
• und bei Extrapolation auf 420 RMP max
Datum: 25.02.2021
----------------------------------------- --------------------------------------------------Testleiter: Dipl.-Ing.(FH) A. Stalinski Informationstechnikermeister: A. Schestak
DEKRA Certification GmbH * Handwerkstraße 15 * D-70565 Stuttgart * www.dekra-certification.de Seite 1 von 1
ZERTIFIKAT
ISO 9001:2015 DEKRA Certification GmbH bescheinigt hiermit, dass das Unternehmen
Hartmann & König Stromzuführungs AG Zertifizierter Bereich:
Entwicklung, Produktion, Vertrieb und technische Dienstleistungen von Systemen zur Energie- und Datenübertragung für ortsveränderliche Verbraucher in Serien- und Sonderausführungen Zertifizierter Standort:
D-76676 Graben-Neudorf, Hubert-und-Ursula-Herberger-Platz 1
ein Qualitätsmanagementsystem entsprechend der oben genannten Norm eingeführt hat und aufrechterhält. Der Nachweis wurde mit Auditbericht-Nr. A18021522 erbracht.
Dieses Zertifikat ist gültig vom 09.08.2018 bis 08.08.2021
Zertifikats Registrier-Nr.: 30798450/6
Lothar Weihofen
DEKRA Certification GmbH Stuttgart; 07.08.2018
D-PL-12003-01 Management SystemISO 9001:2015
www.tuv.comID 9105026575
You do not need Direct marketing with long-term contracts
anymore.
Create your own independent energy
supply.
You save CO2 sustainably in
combination with your PV system.
9 NRGSync Product description EMIWA® ANJO
Welcome to the sunny side of innovative technology.
Get in touch with us.
Headquarters
NRGSync Holding GmbHJoseph-Haydn Weg 371126 GäufeldenGermany
+ 49 (0)[email protected]
www.nrgsync.com
Concept und design: weadyou.comAugust 2021
EMIWA® ANJO Product description NRGSync 10
EMIWA® ANJO V1.0 TN 8_21
NRGSync Holding GmbH, Joseph-Haydn Weg 3, 71126 Gäufelden, Tel: 07032-2297008, [email protected]
All rights reserved.
Concept und Design: www.weadyou.com
*All specifications are subject to change. Price definitions can fluctuate and are subject to actual planning
and construction costs at the time of creation. Performance data are always subject to the choice of location
and are not binding. This information brochure is for information only. Claims to the correctness of the con-
tent are already being rejected today. Typos do not constitute a false statement. Liability claims from this
brochure are already rejected today.
We are member:
