Date post: | 19-Apr-2015 |
Category: |
Documents |
Upload: | quoc-thanh |
View: | 218 times |
Download: | 11 times |
Emulsions & Sunscreens:An Update
Ken Klein
Definition! An emulsion is a system of two (or
more) immiscible materials (usually liquids) in which one material (the dispersed/internal phase) is suspended or dispersed throughout another material (the continuous/external phase) in separate droplets
Typical Emulsion Components(water phase)
Water QS Humectant 2-7% Preservative 0.05-1.0 Emulsifier 0.5-1.5% Thickener 0.1-2% Emollient 0.5-2% “Whiffle dust” QS
Typical Emulsion Components(oil phase)
Emollients 5-10% “Actives” Drug level Antioxidant 0.05-0.2% Emulsifier (primary) 1-2% Emulsifier (secondary)
1-2%
Wax 0.5-2% Silicones 0.5-5%
Typical Emulsion Components(misc.)
Preservative qs Fragrance 0.1-1% Color qs
Emulsifiers:Function! Reduce surface tension! Form complex interfacial films (on the
surface of emulsion droplets)! Form liquid crystalline structures which
act as a barrier to coalescence
Comment! All emulsions are inherently unstable
(with the exception of spontaneously forming micro emulsions). All we can do is delay the day when the instability will arrive.*
*Barker, Graham
Stokes LawV=d2(∆p)g/18η
Goal= Reduce the value of VV=Velocity of sedimentationd=diameter of particles of the dispersed phase∆p =difference between the specific gravity of the internal and external phasesg=acceleration due to gravityη=viscosity of the external phase
Stabilization! Increase viscosity! Decrease particle size and obtain a
narrow distribution of particle sizes! Improve strength of interfacial film
! Choice of emulsifier
! Reduce particle interaction! Preservation considerations
Viscosity Effects! Increase % (phase ratio) of internal phase! Decrease particle size
! The internal phase occupies a greater volume
! Add electrolyte (monovalent)! At higher concentrations you interfere with the
electrical double layer and destabilize emulsions! Destabilizes O/W emulsions! Stabilizes many W/O emulsions! Stabilizes many Cationic emulsions
Emulsion Stabilization(on the micro level)
! Electrical charges (double layer)! Solvated layers (liquid crystals?)! Surface rigidity/elasticity! Steric effects (emulsifier packing)
Particle Size Influences! You MUST have small particles and a narrow
distribution of particle sizes! Choice of emulsifier! Placement of emulsifier! Concentration of emulsifier! Processing
! Phasing! Mixing equipment! Temperature effects
Ostwald Ripening
! The phenomenon whereby smaller droplets seem to disappear and larger droplets grow in size! Small droplets have a high radius of
curvature. This leads to an increased outward pressure (Laplace pressure) and to greater solubility of the oil components in the water phase. Diffusion then occurs from the water phase into the larger oil droplets which are seen to grow in size.
! The result is emulsion instability!
Cognis Skin Care, Dr. R. Daniels
Fatty Alcohol Adsorption
Interfacial Film Strength
Steric Stabilization! The term steric stabilization is generally
used to describe stabilizing action of polymers adsorbed on the surface of the discontinuous phase (droplets) of dispersions and emulsions. It is also known as colloidal protection.
I.E Heller and L. Pugh; J. Chem. Phys., 22, 1778(1956)
W/O Steric Stabilizing Emulsifier
Hydrophobically Modified Polymeric Emulsifier! Pemulen (B.F. Goodrich)
High molecular weight polyacrylate C10-30 alkyl crosspolymersOil-in-water emulsifierStabilizes emulsions through polyanionic (negative charge on hydrophobe)steric stabilization
Synthetic Thickeners! Carbomer
! Acrylic acid polymer! Available in several grades
! ETD (Easy To Disperse), more salt tolerant?! Ultrez…Easy to disperse! Various viscosity grades
! Positives! Excellent high temperature stability/viscosity, good suspension
characteristics! Negatives
! Poor electrolyte tolerance! Must be neutralized! Not compatible with cationics
! Use level (emulsions)! 0.1-0.5%
Aculyn 22! Acrylic polymer emulsion (30%)
! INCI! Acrylates/Steareth-20 Methracylate Copolymer
! Positives! Easy to incorporate, good high temperature
viscosity
! Negatives! Must be used (neutralized)at pH 7 and above
Sepigel 305! Polymer emulsion (30%)
! INCI! Polyacrylamide (and) C13-14 isoparaffin (and) laureth-7
! Positives! Easy to incorporate, good high temperature viscosity! Good compatibility with zinc oxide, good low pH
tolerance
! Negatives! Off odor, expensive, difficult to control viscosity
Salcare SC 96! Polymer emulsion (30%)
! INCI! Polyquaternium-37 (and) propylene glycol
dicaprylate/dicaprate (and) PPG-1 Trideceth-6! Positives
! Easy to incorporate, good high temperature viscosity! Good compatibility with zinc oxide, good low pH
tolerance! cationic
! Negatives! Off odor, expensive, difficult to control viscosity! Incompatible with anionic materials
Cellulose based thickeners! Excellent stability vs. pH! High use levels needed to build
viscosity (1-2%)! Anionic and nonionic versions available! Can thicken alcohol (hydroxypropyl
cellulose)
Natural Thickeners! Acacia-Gum Arabic
! Polysaccharide Hydrocolloid, odorless
! Algin-Sodium Alginate! Seaweed odor
! Carrageenan! Seaweed derived polysaccharide, good slip
! Locust bean gum! Polysaccharide, odorless
! Xanthan Gum! Anionic polysaccharide, fermentation product! Good electrolyte and pH tolerance! Maintains viscosity at elevated temperatures
Inorganic Thickeners! Bentonite (clay derived)
! Used as a suspending agent. Can be used to stabilize w/o emulsions.
! Available as preblended gels (cyclomethicone, IPM, etc.)
! Laponite- Sodium magnesium silicate! Thixotropic agent! Delicate formulation parameters
! Magnesium Aluminum Silicate! Water insoluble! Good suspending agent! Usually combined with other thickeners! Good pH, electrolyte tolerance
Misc. Thickeners! High melting point waxes
! Beeswax! Carnauba
! Fatty alcohols! Cetyl! Stearyl! Behenyl
! Fumed Silica! Thickens oil phase
Methods For Choosing Emulsifiers
! HLB! Hydrophilic Lipophilic Balance
! Water Solubilization! Dr. T. J. Lin
! PIT! Phase Inversion Temperature
! Dr. Shinoda
HLB
! Invented in 1949 by Griffin. Assigns a number from 1 to 20 to emulsifiers based on % weight of Hydrophobe to Lipophobe in a molecule.
! Used almost exclusively for nonionic emulsions
! HLB below 9…w/o! HLB 9-10..?! HLB above 10…o/w
HLB
! Oils have a required HLB! Generally one should blend high and low HLB
emulsifiers to get the best emulsion! HLB of ethoxylated emulsifiers
! HLB=E/5 where E= weight % of ethylene oxide
HLB! Positives
! Excellent starting point! Generally produces a fairly good emulsion
! Negatives! Ignores the importance of:
! Electrical double layer ! Temperature effects of ethoxylates! Fatty alcohols! Placement of emulsifier! % of emulsifier to be used! Phase volume ratios! Component interactions! Liquid crystals
Water Solubilization:Dr. T. J. Lin
! A method to choose emulsifiers! Addresses most of the drawbacks of the
HLB system
Water Solubilization:Dr. T. J. Lin
! The ability of the oil phase (with oil phase emulsifiers) to solubilize water is inversely proportional to the final particle size of the emulsion
Water Solubilization:Dr. T. J. Lin
! The oil phase is heated to emulsification temperature and stirred. Water is slowly added until a cloudy oil phase is seen.
! This method can be used to:! Choose emulsifiers! Determine optimal concentration of emulsifiers! Determine effects of “oil” components on emulsion
stability
Water Solubilization
Oil Phase
Heat
Water
Water Solubilization:A “Trick”
! Pretreat the oil phase!! Improves/reduces particle size
distribution
PIT:Phase Inversion Temperature
! Dr. Shinoda! The temperature at which the emulsion
inverts due to nonionic (ethoxylates)/ interactions.
PIT! As the temperature increases, the water
solubility of ethoxylated nonionic emulsifiers becomes poorer (the HLB decreases). There is a temperature (PIT) at which the Hydrophilic and Lipophilic characteristics of the emulsifier are equal (relative to the required HLB of the oil phase). At this temperature the emulsion will exhibit a phase inversion.
! The PIT should be at least 20C higher than the storage temperature. Choose emulsifiers, and concentrations, to raise the PIT.
Liquid Crystals:A Definition
Highly anisotropic fluids that exist as a result of long-range orientational ordering among constituent molecules.Also: Three dimensional association structures which stabilize emulsions.
Liquid Crystals In Emulsions
Suzuki, Tsutsumi and Ishida:
The self bodying action of fatty alcohols is caused by the formation of a network structure of liquid crystalline phase in the emulsion system
Liquid Crystals
This ordering is adequate to provide for increased viscosity, but not strong enough to prevent flow, thus viscous liquids are typical.This dualism between a solid (crystal) and a flowing liquid gives rise to the term liquid crystal.High temperatures will destroy the fine structure resulting in an isotropic liquid. Upon cooling the structure may or may not reform.
Mechanism Of Stabilization
! A barrier forms around the emulsion droplets and strengthens the o/w interface.
! A gel network is formed which extends from the surface of the droplets out into the bulk of the external phase. This increases the viscosity and impedes droplet movement.
Liquid Crystal Emulsifiers! Mimic the lipid bilayer in all skin cells! Good barrier function
! Reduce TEWL?
! For sensitive skin! Delivery System for Vitamins! Ideal for sunscreens
! Low HLB emulsifiers
Liquid Crystal Emulsifiers! Arlatone 2121
! Sorbitan Stearate and Sucrose Cocoate! Low HLB
! Place in water phase
! Stepan-Mild RM1! Sodium Stearyl Phthalamate
! Nikkomulese 41! Polyglyceryl-10 pentastearate and behenyl alcohol
and sodium stearoyl lactylate
! Montanov 68/Emulgade 68/50! Cetearyl glucoside
SPF 8 Self Tanner With Zenigloss Q-SELiquid Crystal Stabilized
! Phase A! DEIONIZED WATER QS! DISODIUM EDTA 0.1! GLYCERIN 96% 2.0! XANTHAN GUM 0.3! ARLATONE 2121(SORBITAN STEARATE AND SUCROSE COCOATE) 2.5
! PHASE B! OCTYL METHOXYCINNAMATE 7.5! OCTYL SALICYLATE 5.0! ZENIGLOSS Q-SE 2.5! LEXOREZ TL8 (TRIMETHYLPENTANEDIOL/ADIPIC ACID COPOLYMER) 3.0! ZENIGLOSS SE 2.5! TOCOPHERYL ACETATE 0.1! BHT 0.05! DIOCTYL SEBACATE 5.0
! PHASE C! ARLASOLVE DMI (DIMETHYL ISOSORBIDE) 3.0! TRANSCUTOL (ETHOXYDIGLYCOL) 5.0! DHA 5.0
! PHASE D! DEIONIZED WATER 5.0! SODIUM METABISULFITE 0.3! CITRIC ACID TO Ph 4.0 qs
! PHASE E! PHENONIP 1.0
Cationic EmulsifiersPositively Charged Hydrophobe
! [R-N-R]
R
R+ Cl-
Excellent Skin Feel, easy to preserve, low use levels. Can be irritating.
DRY SKIN MOISTURIZER (CATIONIC)
! Phase A! DEIONIZED WATER QS! DISODIUM EDTA 0.1! GLYCERIN 96% 3.0! SALCARE SC96 3.0
! PHASE B! CYCLOMETHICONE PENTAMER 5.0! ZENIGLOSS Q-SE 5.0! ZENIBEE CREAM 3.0! TOCOPHERYL ACETATE 0.1 ! DIMETHICONE 3.0! CETEARYL ALCOHOL 2.5! GLYCERYL STEARATE 0.05
! PHASE C! GERMABEN II 1.0
Nonionics! Ethoxylates Predominate! Broadly compatible! Best stability is achieved by combining
with ionic emulsifiers.
W/O EmulsionsApplications! Protective creams
! Forms a water resistant barrier against water and water soluble irritants
! Moisturizer! Reduces TEWL
! Cleansing creams! Sunscreen lotions! Baby lotions! Make-up products
W/O EmulsionsDisadvantages! Higher cost of goods than o/w systems! More difficult to manufacture and clean
up! Inherently less stable due to lack of
cohesive double layer effect! Often give a greasy occlusive skin feel
W/O Polymeric Emulsifier
DRY SKIN MOISTURIZER (W/0)
! Phase A! DEIONIZED WATER QS! DISODIUM EDTA 0.1! GLYCERIN 96% 3.0! SODIUM CHLORIDE 0.75! GERMABEN II 1.0
! PHASE B! CYCLOMETHICONE PENTAMER 2.0! ZENIGLOSS Q-SE (or) ZENIGLOSS SE 1.0! ZENIBEE CREAM 3.0! TOCOPHERYL ACETATE 0.1 ! DIMETHICONE 3.0! CASTORWAX MP80 (HYDROGENATED CASTOR OIL) 2.0! ABIL EM90 (CETYL DIMETHICONE COPOLYOL) 4.5
Sunscreens:The Basics
Types of Solar UV Radiation! UVAI (340-400nm)
! Can cause tanning but has minimal erythemal effect. Can cause long-term damage. Penetrates deeply.
! UVAII (320-340nm)! Slight erythemal contribution
! UVB (290-320nm)! Causes sunburn and is a major contributor to skin cancer
development.
! UVC (200-290nm)! Very energetic radiation. Absorbed by the ozone layer.
Ultraviolet WavelengthsTypical UVB Sunscreen absorbance
0
0.2
0.4
0.6
0.8
1
200 220 240 260 280 300 320 340 360 380 400
Wavelength (nm)
UVC UVB UVA
Filtered out by ozonelayer
Causes wrinkling/agingSunburnCancer
UVAII UVAI
Absorbtivity
Energy
Skin Penetration
SPF! MED
! Minimum Erythemal Dose! Sun Protection Factor
! MED(ps)/MED(us)! % UVB Absorbed (Sayre)
! ((SPF-1)/SPF))*100! SPF 2 absorbs 50%! SPF 15 absorbs 93.3% ! SPF 30 absorbs 96.7% ! SPF 50 absorbs 98%
λ vs. Erythemal Effectiveness (Diffey, B., J. Soc. Cosmet.Chem., 40, 127-133)
0.0007350
0.0005360
0.0003370
0.0001400
0.009320
0.001340
0.003325
0.02315
0.07310
0.22305
0.65300
1.0295
Erythemal EffectivenessWavelength
UVB Reflectivity vs. Surface (Lilyquist)
1White Skin17Sand9Water50Old/Dirty Snow85Fresh Snow
% UVB ReflectedSurface
Drug Definitiona. Articles recognized in the official United States
Pharmacopoeia, official Homeopathic Pharmacopoeia of the United States, or Official National Formulary, of any supplement of them,
b. Articles intended for the use in the diagnosis, cure, mitigation or treatment of disease in man or other animals
c. Articles (other than food) intended to affect the structure or any function of the body of man or other animals,
d. Articles, intended for use as a component of any articles specified in (a,b or c)
Final Monograph! 16 Approved (meets monograph
conditions) Sunscreens! Maximum SPF…30+! Sun block
! Not a permitted claim
! SPF 0 and 1! Not a permitted claim
Final Monograph! Waterproof
! Expanded Claims (“8 hour”, “abrasion resistant”) are not permitted
! Static testing not required for water resistance claims
! IR Claims are non-drug claims
Final Monograph! UVA Efficacy Evaluation
! Eyrthema! IPD
! Immediate Pigment Darkening
! PPD! UVA/UVB Ratio
! Star System! Critical Wavelength
Final Monograph
! No Minimum Use Levels Of Sunscreens! The “concentration of each active sunscreen ingredient in a
combination product must be sufficient to contribute a minimum SPF of 2 to the finished product and the finished product must have a minimum SPF of not less than the number of sunscreen actives used in combination multiplied by 2.”
Final Monograph! UVA
! Will be addressed in a future issue of the Federal Register
! Testing
! “chemical free”! “PABA Free”
! Aminobenzoic acid (PABA) Free
Courtesy of:Dave Steinberg
Approved Sunscreens
7.5Octyl Methoxycinnamate (Octinoxate)
10Octocrylene
5Menthyl Anthranilate (Meradimate)
15Homosalate3Dioxybenzone3Cinoxate3Avobenzone15Aminobenzoic Acid
Maximum %Sunscreen
Approved Sunscreens
25Zinc Oxide12Trolamine Salicylate25Titanium Dioxide10Sulisobenzone
4Phenylbenzimidazole Sulfonic Acid (Ensulizole)
8Padimate O6Oxybenzone5Octyl Salicylate (Octisalate)
Maximum %Sunscreen
Sunscreen Chemistry
It was a POLAR bear
Why did the white bear dissolve in water?
Sunscreen Chemistry! Ground State→Excited State → Ground State
! Energy given off as:! IR! Cis/trans isomerization! Fluorescence! Phosphorescence! Visible
Sunscreen Chemistry! Solvent effects
! Nonpolar solvents stabilize the ground state of sunscreens that are nonpolar and thus greater energy (shorter wavelength) is needed to excite these sunscreens. Their curves are seen to shift to the left (shorter wavelength). Typically the SPF decreases.
Avobenzone! Keto↔Enol Tautomerism! Stability Issues
! Patents! Octocrylene (L’Oreal)! Methyl benzylidine camphor (P&G)! Hallbrite TQ (di-octyl naphathlate)
! Triplet Quenching! Formulation Issues
! Particulates! formaldehyde
Particulate Sunscreens! Mechanism of action
! Particles smaller than 150nm will block/scatter UV but not exhibit whitening on the skin
! Increase of optical path length
Mechanism Of Particulate Absorption(Anderson)
Titanium Dioxide! Two Crystalline Forms
! Anatase! Photo unstable
! Rutile! Photo stable
Zinc Oxide! UVA/UVB absorbance! Formulation Issues
! Use dispersant to reduce agglomeration! Use suspending agent! Avoid materials sensitive to polyvalent
materials! Fatty acids! Carbomers
Sunscreen Chemistry! Solubility Parameter Considerations (Vaughan, C.)
! If the solubility parameter (a measure of polarity) of the sunscreen is not matched to the solubility parameter of the oil phase, agglomeration will result with a decrease in the SPF.
Sunscreen Agglomeration (Solubility Parameter Effects)
! The Solubility Parameters of sunscreens and solvents must be matched to give optimal performance
! Sunscreen Solubility ParameterOMC 9.3Padimate O 9.1Dimethylisosorbide 9.2Octocrylene 9.3
Sunscreen UV Absorption (Solubility Parameter Effects)
! Sunscreen (mixture) Low conc. High conc.Mineral oil/Padimate O 97% 21%Mineral oil/Padimate O/co solvent 99% 54%Mineral oil/Padimate O/co solvent/Polymer ----- 100%
Vehicles! Emulsions
! O/W! W/O
! Hydro alcoholic! Sticks! Ointments! Gels! Aerosols
! Foams! Sprays
! Propellant! Pumps
Optimizing Formulations
! SPF! Water resistance! Mildness
Optimizing SPF! Residual Skin Film
! Thickness! Optical path length
! Uniformity! Absorb maximally in the UVB region and up
to 340nm! Use the correct vehicle! Combine particulates and organic sunscreens! solubility parameter considerations
Optimizing Water Resistance! Water insoluble sunscreens! Use hydrophobic vehicles
! W/O emulsions! Ointments! Sticks! Oils
Optimizing Water Resistance! O/W emulsions
! Minimum levels of hydrophilic emulsifiers! Soaps! Highly ethoxylated emulsifiers
! Use High Oil Levels! Film formers/resins! Acrylates/C10-30 alkyl acrylate
crosspolymer (Pemulen)
Optimizing Water Resistance
! Have emulsion break or invert from O/W to W/O during application
Formulating Mild Sunscreen Formulations
! Minimum emulsifier levels! Avoid soap based systems
! Minimum levels of preservative! Minimum levels of fragrance! Minimum levels of sunscreens! Use long chain “oils”
IR Effects (Dr. Ken Marenus)
! IR: 700-1000nm! When cells (keratinocytes and fibroblasts are damaged they
release arachidonic acid)! Antioxidants inhibit IR damage (Vitamin E linoleate, BHT, etc.)
! TiO2 protects from IR damage! Test: Measure time needed to heat a petri dish of
water, coat with sunscreen and repeat measurement! 1 MED (UVB)=75mJ/cm2…10-20 minutes! 1 MED (UVA)=10J/cm2…50 minutes! 1 MED (IR)=40mJ/cm2…180 minutes
SPF 30 KIDS SUNSCREEN STICK With Zenigloss S
! Phase A! WHITE CERASIN WAX QS! CARNAUBA WAX 4.0! ALOE OIL 0.15! TOCOPHERYL ACETATE 0.1! ZENIGLOSS S 5.0! CREMEROL HMG (HYDROXYLATED MILK GLYCERIDES) 3.0
! PHASE B! OCTYL METHOXYCINNAMATE 7.5! OCTYL SALICYLATE 5.0! Z-COTE HP1 6.0! LAURYL LACTATE 3.0! ZENIGLOSS SE 2.5! BHT 2.5
SPF 15 VERY WATER RESISTANT SPRAY With Zenigloss S
! Phase A! DEIONIZED WATER QS! DISODIUM EDTA 0.1! M,P DIOL 2.5! PEMULEN TR-1 0.25
! PHASE B! OCTYL METHOXYCINNAMATE 7.5! OCTYL SALICYLATE 5.0! OXYBENZONE 2.0! ZENIGLOSS SE 1.5! ZENIGLOSS S 2.5
! PHASE C! TRIETHANOLAMINE 99% 0.2
! PHASE D! GERMABEN II 1.0
THE COAT HANDLER SUNSCREEN
•Sunscreen for Pets - SPF 15•Imagine a sunscreen for both you and your pet! Ideal for shave-downs; Poodles that are groomed with a #40 blade; hunting and camping; non-water sports, Chinese Cresteds and other hairless breeds; helping to prevent sun damage to black coats; helping toprevent skin cancer in older pets. •Available in 2 oz. and 8 oz. pump sprays.
© 1998 Senproco, Incorporated