8/9/2019 En ISO 1874-1 - Nylon PA 6 Natural

1/14

ICS 83.080.20

Kunststoffe – Polyamid (PA)-Formmassen – Teil 1: Bezeichnung(ISO 1874-1 : 1992)

European Standard EN ISO 1874-1 : 2000 has the status of a DIN Standard.

 A comma is used as the decimal marker.

National foreword

This standard has been published in accordance with a decision taken by CEN/TC 249 to adopt, withoutalteration, International Standard ISO 1874-1 as a European Standard.

The responsible German body involved in its preparation was the Normenausschuss Kunststoffe (PlasticsStandards Committee), Technical Committee Polyamid-Formmassen.

The DIN Standards corresponding to the International Standards referred to in clause 2 of the EN are asfollows:

ISO Standard DIN Standard(s)

ISO 307 DIN EN ISO 307

ISO/R 527 DIN EN ISO 527-1, DIN EN ISO 527-2, and DIN EN ISO 527-3

ISO 1043-1 DIN EN ISO 1043-1

ISO 1043-2 DIN ISO 1043-2

ISO 1874-2 DIN EN ISO 1874-2

ISO 3451-4 DIN EN ISO 3451-4 * )

 Amendments

DIN 16773-1, February 1985 edition, has been superseded by the specifications of EN ISO 1874-1, whichis identical to ISO 1874-1.

Previous edition

DIN 16773-1: 1985-02.

Ref. No. DIN EN ISO 1874-1 : 2001-02English pr ice group 08 Sales No.1108

06.01

DEUTSCHE NORM February 2001

EN ISO 1874-1

{

Continued overleaf.

EN comprises 12 pages.

© No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut für Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen) .

Polyamide (PA) moulding and extrusion materialsPart 1: Designation(ISO 1874-1 : 1992)

English version of DIN EN ISO 1874-1

Supersedes DIN 16773-1,February 1985 edition.

*) Currently at draft stage.

8/9/2019 En ISO 1874-1 - Nylon PA 6 Natural

2/14

National Annex NA Standards referred to(and not included in Normative references and Annex ZA  )

DIN EN ISO 307 Polyamides – Determination of viscosity number ( ISO 307 : 1994)

DIN EN ISO 527-1 Plastics – Determination of tensile properties – Part 1: General principles for the deter-mination of tensile properties (ISO 527-1 : 1993 + Corr 1 : 1994)

DIN EN ISO 527-2 Plastics – Determination of tensile properties – Part 2: Test conditions for moulding andextrusion plastics (ISO 527-2 : 1993 + Corr 1 : 1994)

DIN EN ISO 527-3 Plastics – Determination of tensile properties – Part 3: Test conditions for films and sheets(ISO 527-3 : 1995)

DIN EN ISO 1043-1 Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their specialcharacteristics (ISO 1043-1 : 1997)

DIN EN ISO 1874-2 Polyamide (PA) moulding and extrusion materials – Preparation of test specimens anddetermination of properties (ISO 1874-2 : 1995)

DIN EN ISO 3451-4 Plastics – Determination of ash – Part 4: Polyamides (ISO 3451-4 : 1998)* )

Page 2DIN EN ISO 1874-1 : 2001-02

*) Currently at draft stage.

8/9/2019 En ISO 1874-1 - Nylon PA 6 Natural

3/14

English version

ICS 83.080

Central Secretariat: rue de Stassart 36, B-1050 Brussels

European Committee for Standardization

Comité Européen de Normalisation

Europäisches Komitee für Normung

Plastics

Polyamide (PA) moulding and extrusion materialsPart 1: Designation

(ISO 1874-1 : 1992)

© 2000. CEN – All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.

Ref. No. EN ISO 1874-1 : 2000 E

Plastiques – Matériaux polyamides(PA) pour moulage et extrusion –Partie 1: Désignation(ISO 1874-1 : 1992)

Kunststoffe – Polyamid (PA)-Form-massen – Teil 1: Bezeichnung(ISO 1874-1 : 1992)

This European Standard was approved by CEN on 2000-09-08.

CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.

Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Central Secretariat or to any CEN

member.

The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibili ty of aCEN member into its own language and notified to the Central Secretariat has thesame status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland,and the United Kingdom.

ÈÉË

EN ISO 1874-1

September 2000

8/9/2019 En ISO 1874-1 - Nylon PA 6 Natural

4/14

Page 2EN ISO 1874-1 : 2000

Foreword

International Standard

ISO 1874-1 : 1992 Plastics – Polyamide (PA) moulding and extrusion materials – Part 1: Designation,

which was prepared by ISO/TC 61 ‘Plastics’ of the International Organization for Standardization, has beenadopted by Technical Committee CEN/TC 249 ‘Plastics’, the Secretariat of which is held by IBN, as a EuropeanStandard.

This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, and conflicting national standards withdrawn, by March 2001 at the latest.

In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-ing countries are bound to implement this European Standard:

 Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.

Endorsement notice

The text of the International Standard ISO 1874-1 : 1992 was approved by CEN as a European Standard withoutany modification.

NOTE: Normative references to international publications are listed in Annex ZA (normative).

8/9/2019 En ISO 1874-1 - Nylon PA 6 Natural

5/14

Page 3EN ISO 1874-1 : 2000

8/9/2019 En ISO 1874-1 - Nylon PA 6 Natural

6/14

Page 4EN ISO 1874-1 : 2000

8/9/2019 En ISO 1874-1 - Nylon PA 6 Natural

7/14

Page 5EN ISO 1874-1 : 2000

8/9/2019 En ISO 1874-1 - Nylon PA 6 Natural

8/14

8/9/2019 En ISO 1874-1 - Nylon PA 6 Natural

9/14

Page 7EN ISO 1874-1 : 2000

8/9/2019 En ISO 1874-1 - Nylon PA 6 Natural

10/14

Page 8EN ISO 1874-1 : 2000

8/9/2019 En ISO 1874-1 - Nylon PA 6 Natural

11/14

Page 9EN ISO 1874-1 : 2000

8/9/2019 En ISO 1874-1 - Nylon PA 6 Natural

12/14

Page 10EN ISO 1874-1 : 2000

8/9/2019 En ISO 1874-1 - Nylon PA 6 Natural

13/14

8/9/2019 En ISO 1874-1 - Nylon PA 6 Natural

14/14

Page 12EN ISO 1874-1 : 2000