+ All Categories
Home > Documents > En ModulTechnik Moduflex 2500 2600

En ModulTechnik Moduflex 2500 2600

Date post: 01-Jun-2018
Category:
Upload: razvan-preda
View: 226 times
Download: 0 times
Share this document with a friend

of 12

Transcript
  • 8/9/2019 En ModulTechnik Moduflex 2500 2600

    1/12

    Reg.-Nr. 1829400 / QM / 05.97 (AA)QM-System-Audit

    DIN EN ISO 9001:2000

    Ceiling-suspended Supply Unit

    Moduflex 2500 and Moduflex 2600

    The medical supply unit

    with exemplary conception and functionality

    medical

    supply systems

    and equipment

    modultechnik GmbH

  • 8/9/2019 En ModulTechnik Moduflex 2500 2600

    2/12

    Moduflex 2600 with Equipment carrier IW 2500-Tr-M fig. 2and GW 2500-Tr-M

    Moduflex 2500 with B BSP 2500-I-P fig. 3asic support head

    Moduflex 2500 and 2600 - the multi-option medical supply

    ceiling unit

    With regard to the system rangesand , special attention has

    been given to high levels of hygiene andintensive med. requirements.

    Thanks to their modular design, themedicalsupplyceilingunitsinthe

    and ranges offer a flexiblearrangement of the system and theworkplace. Taking into consideration yourrequirements, the area of usage andspatial dimension, isable to offer you a supply unit tailored toyour individual medical needs.

    To ensure that the patient receives the bestpossible care, the unit is accessible from allsidesinallmodelvariants.

    The new design of the rangeoffers all the facilities necessary for opti-mumpatientcare.

    In the basic version, the supplybeam can be fitted with the necessarymedia and installations at the front andback of the unit on many levels. Simpleequipment carriers, which move along theentire length of the beam, complete theworking area facilities.

    Whatever the requirements of the chosencourse of treatment and the amount ofequipment and care accessories neededare, the entire unit can be situatedconveniently close to thepatient.

    Our new basic support head generation,which can be positioned as required with ina range of 1,000 mm, provides the bestpossible care for the patient what-ever thechosen course of treatment, offering 3 - 5

    level installation possibilities, easily adjust-able equipment consoles and swivel armsto provide infusion, monitoring and respira-tory equipment to the intensive care ward.

    Moduflex

    2500 2600

    Moduflex

    2500 2600

    modul technik GmbH

    Moduflex

    Moduflex

    The concept is designed to meet all requirementsmodul technik GmbH

  • 8/9/2019 En ModulTechnik Moduflex 2500 2600

    3/12

    CEE-socket 400 V/16 A (5-pole) fig. 6

    Ergonomically and optimally designed for a wide range of integration

    possibilities

    data socket RJ 45, telephone socket fig. 7and nurse call system (light call)

    electrical socket 230 V/16 A and fig. 5potential equalizer

    Moduflex 2500 and Moduflex 2600

    Moduflex 2500 with Equipment carrier fig. 4GW 2500-Tr-M

    Design according to space availability

    Optional Equipment

    Power Current Technology

    Optional Equipment

    Monitoring/Communication Technology

    The and supply units are produced infull respect of projectconsiderations and are tailor-made tomeet the requirements of the operator. The horizontalsupply baris availablein several standard lengths.

    Thanks to this modular assembly, a flexible andof in-built components for power current-,

    communication- and medical gas technology on severallevels is made possible.

    The medical supply units and comeequipped with safety sockets (230V/16 A withcontrol light)

    as well as CEE-sockets (230 V/16 A 3-pole, 400 V/16 A 5-pole) as standard. Number of sockets and type of circuit ofthe build in elements as well as the mains supply will beconsidered according to eachproject.

    According to customer specifications further elements canbe built in. An electrical connecting blockis built in at worksand is wired for theelectricalcomponents.

    Spacialist firms offer connection facilities for monitors andpatient-monitoring units. It is, however, possible to make

    the necessary preparations for the installation of suchdevices (normally made available to )in the medical supply systems , inour factory. The connection of monitoring systems fallsbeyond the service range of , due to

    the fact that a higher level of operational safety calls forcables to remain uncut. Plug devices and sockets forcommunication made available toare installed in our factory in accordance with theinstructions of the specificmanufacturers.

    Moduflex 2500 2600

    front rear

    arrangement

    Moduflex 2500 2600

    modul technik GmbH

    Moduflex 2500/2600

    modul technik GmbH

    modul technik GmbH

    The supply beam is equipped witheither basic or acute treatment supplies, as required.

    Acutesupplies, front

    Basic supplies, rear

  • 8/9/2019 En ModulTechnik Moduflex 2500 2600

    4/12

    90

    60

    90

    70

    20

    Medical supply systems, simple and comfortable

    Moduflex 2500 installation levels fig. 9

    level 3

    level2

    Moduflex 2600 installation levels fig. 11

    Moduflex 2600, med. gas technology fig. 10

    Moduflex 2500, med. gas technology fig. 8

    Moduflex 2500 and Moduflex 2600

    Moduflex 2500Comfortable

    Moduflex 2600

    Simple and Practical

    Optional Equipment Medical Gas

    Technology

    The medical supply unit offersthree possible levels of installation on the front andrear side. Level 1, at an angle of 20, Level 2 at anangle of 70and Level 3 at an angle of 90. Thiscreates a total of six levels to which equipment canbe attached, providing ample care and optimumoverview. : Installationarea forhigh voltage,low-voltage and communications technology.

    : Installation area for medical compressed

    gases and vacuum. is reserved for anequipment rail according to .

    This model shows that a modular medical supplyunit can be equipped to suit the requirements of

    the operator.

    Flexibility saves money!

    Two installation levels at the front and back of theunit ( at 60, at 90) suffice in manycasestofulfiltheneedsoftheapplication.

    Moduflex 2500

    Level1

    Level 2

    Level 3DIN EN12218

    Level 1 Level 2

    The systems are delivered project-oriented andready for use, with in-built outlet points in

    accordance with and .The installation of each of the following currentlya va i la b le p ro d uc t s, s u ch a s D R G E R,GREGGERSEN, HEYER, MEDAP, is possible.(country-specific products may be installed inprojects for use in other countries) The decision toinstall a single- or dual circuitsystem is undertakenby the technical planner with respect to eachprojectindividually.

    The copper pipes installed within the systemcomply with the quality requirements governingmedical pressurised gases and vacuums in accor-

    dance with and .

    DIN EN 737-1 DIN EN 737-4

    DIN EN737-3 ENISO 11197:2005

    level

    3

    level 2

    level1

  • 8/9/2019 En ModulTechnik Moduflex 2500 2600

    5/12

    Equipment Carrier GW/IW 2500

    Equipment Carrier GW/IW 2500range for medical supply systems

    Series Moduflex 2500/2600

    Equipment carriers for monitoring,breathing apparatus and infusions areproject-oriented in design, enabling you toindividually design your workstation. Thispossibility allows us to arrange your work-ing area optimally, whatever the field ofapplication, chosen course of treatment

    or amountof equipment required.

    The flexible, height-adjustable equipmentconsoles can be fitted centrally or non-centrally to the vertical high-grade steelcarrier beams. As an additional optiontheequipment console can also be moved toanypointalongthehorizontalaxis.

    To arrange the working area to suit yourneeds, hasdeveloped an extensive range of acces-

    sories. Thanks to this modular construc-tion, the variable arrangement of yourworkstation can also be adapted at laterdate.

    The equipment carrier trolleys, typesand

    can be positioned freely along the entirelength of the supply beam and aremechanically braked when stationary.The mechanical brake on the trolley isreleased manually. The equipment car-riers are fitted with adjustable friction

    brakes and can be adjusted manually byup to 340 until the required position hasbeenreached.

    Socket terminal boxes can be placeduniversally on theequipment carriers.

    Modular technology and an extensive pro-gramme of accessories mean that theequipment carrier systems can bedesigned to suit your field of applicationand medicalequipment requirements.

    m od ul t ec h ni k G mb H

    GW/IW 2500-M GW/IW 2500-Tr-M

    Socket strip fig.17

    for Installation of Monitoring, Respiratory and Infusion Equipment

    Running gear with fig. 16mechanical brake

    GW 2500-Tr-M fig. 13IW 2500-Tr-M fig. 12

    IW 2500-Tr-M fig. 14 fig. 15GW 2500-Tr-M

    Infusion side Monitoring side

    Infusion side

  • 8/9/2019 En ModulTechnik Moduflex 2500 2600

    6/12

    BSP 2500--P fig. 18

    Basic support heads, type BSP 2500 with five vertical levels and

    BSP 2600 with three vertical levels of installation

    Finding the right solution for the task:

    BSP 2500--P, r fig. 20ear view, withsupply points for medicalcompressed gases and vacuum

    BSP 2500--P w fig. 19ith control on theequipment console

    The basic support head generation, seriesand , withfive orthreepossible levelsof installationenables you to position your medical equipment rightwhereyouneedit.

    Compact design, a smooth screw-free surface, high loadcapacity and the direct assigning of media connectionsprovide the maximum levels of safety for your medicalsupplies.

    Even the trolley systems of the basic support heads canbe positioned freely and can be maneuvred to any

    position within a range of +/- 500 mm. When stationary,the trolleys are pneumatically braked to prevent anyinvoluntary movement.

    The basic support heads, which can be rotated by 340and are fitted with adjustable friction brakes, enable themedicalequipment to be adapted forany situation and tobepositionedergonomicallyandclosetothepatient.

    The equipment consoles can be attached to the guiderails integrated on the front of the unit within the basicsupport head and set at the required height at any time,

    thanks to a unique adaptation device.

    BSP 2500

    2600

    Monitoring/breathing apparatus side

  • 8/9/2019 En ModulTechnik Moduflex 2500 2600

    7/12

    500 500

    We have the solution:

    The modular design concept of the new supporthead generation means that we can offer indi-vidual solutions to suit every type of therapy andconcentration of equipment required.

    We offer a range of medical supply unit solutionswhich can be placed next to and connected up to

    the patient, and which incorporate possibilities forhigh and low voltage equipment installations andmedicalgas supplies.

    The user controlswithwhich tomove the trolley andadjust the basic support head to the right positionfor the patient are fitted in a user-friendly positiondirectlyon the support head or equipment console,depending on themodel.

    The modularity of the basic support headgeneration, types and ,means that a wide range of national andinternationallyproducts can be integrated.

    Pivoting carrier arm systems can be installed onboth sides for a range of infusion systems fromdifferent manufacturers.

    BSP 2500 BSP 2600

    BSP 2600-I-P with fig. 21controlon support head

    BSP 2600-I-P, rear fig. 23BSP 2500-I-P fig. 22with controlon equipment console

    Monitoring, Respiration, Infusion Therapy and Care

    Infusion side

    Infusion side

  • 8/9/2019 En ModulTechnik Moduflex 2500 2600

    8/12

    2installationlevels

    3installationlevels

    4installationlevels

    5installationlevels

    O2

    AIR(

    5bar

    )

    VAC

    N2O

    N2

    CO2

    AIR

    -Motor

    Moduflex 2500 x x x x x x x xModuflex 2600 x x x x x x x x

    IW 2500-Tr-MGW 2500-Tr-M x x x x x x

    BSP 2500-Tr x x x x x x x xBSP 2600-Tr x x x x x x x x

    BSP 2500-P 600mm x x x x x x x xBSP 2500-P 1025mm x x x x x x x xBSP 2500-P 1325mm x x x x x x x xBSP 2600-P 600mm x x x x x x x xBSP 2600-P 1025mm x x x x x x x xBSP 2600-P 1325mm x x x x x x x x

    mtechni

    Modular technology for patients

    GW 2500-Tr-Mwith equipmentconsole drawerunit

    BSP 2500-Tr-P

    Moduflex 2500The Moduflex System 2500/2600 off

    Arrange your working

    and requ

    medical

    supply syst

    and equip

    IW 2500-Tr-M

    GW 2500-Tr-M

    BSP 2600-Tr-P

    BSP 2600-P

    syell

    ortr

    eirra

    c

    BSP 2600-Tr-M

    BSP 2500-Tr-M

  • 8/9/2019 En ModulTechnik Moduflex 2500 2600

    9/12

    220/230V

    Cut-out

    73x73

    CEE400V

    POAG

    RJ

    45

    readinglight

    Indirect

    lighting

    Spotlight

    V2Aequipment

    rails

    Equipmentconsole

    Pull

    -out

    writingarea-/keyboard

    Drawer

    x x x x x x x x x x x x x x x x

    x x x x x x x x

    x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

    dulmbH

    h varying therapy requirements.

    BSP 2500-Pwith equipment console

    BSP 2500-Pwith equipment consoledrawer unit, pull-outwriting area

    BSP 2600-Pwith equipmentconsole

    BSP 2600-Pwith equipment consoledrawer unit, pull-out writing area

    you the maximum range of solutions

    a to suit your needs

    ments

    t

    BSP 2500-P

    Moduflex 2600

    basic

    supp

    ort

    heads

  • 8/9/2019 En ModulTechnik Moduflex 2500 2600

    10/12

  • 8/9/2019 En ModulTechnik Moduflex 2500 2600

    11/12

    All under one roof!

    Development, advice, planning,

    production and processing

    Advice

    Planning

    Production

    Project Development

    Service and Maintenance

    However you wish to arrange your working space,the whole range of assembly possibilities andmodular design of the medical supply systems,equipment carriers and basic support heads areideally suited to all intensive care and recoveryward requirements. We can adapt our units to becompatible with your equipment.

    The employees at , our worksrepresentatives and co-operation partners arealways happy to discuss your requirements with

    you,rightfromthestart.

    Of course we are on hand to answer your medicaland technical questions to help you find the rightsolution for your project. We will create a CADdrawingof your requirementand helpyou to decidewhich installations you will need for high and lowvoltage equipment, EDP and medical gas

    technology.

    Our many years of experience have shown that thealuminium and high-grade steel material compo-nents used by benefit theuser financially.

    The patient environment can be further improvedby our range of colour finishes. The surface finishcan be produced in all RAL colours with anelectrostatic powder coating (see overleaf forstandard colours).

    Due to the perfect and durable construction of theunit, maintenance is simple and cheap.

    can offer you an attractivemaintenance agreement tailored to suit thetechnical safety requirements of your premises.

    modul technik GmbH

    modul technik GmbH

    modul

    technik GmbH

    With regard to order development (factory-provided and on-site), optimal procedures aredetailedin our Quality-Management-Handbook.

    Technical Data and Instructions

    Weights, Loads and Additional Loads

    The medical supply unit is

    manufactured and installed to perform thefunctions for which it was designed and comesunder Equipment Category Type B, ProtectionClass 1, for use in medical beds and functionareas.

    The medical supply unit comes ready to install andis manufactured according to the guidelines of

    ,istestedandmarkedwiththeCEsymbol.

    All supplies connected to the system at thecustomers premises are fed into the medicalsupply unit via the ceiling pillars. The interface ofsupplier and customer installations is, dependingon the model, either in the horizontal ceiling pillarsor in the ceiling columns. Maintenance hatchesprovide easy access.

    The medical supply unit has been designed toaccept all specialist firm installations available on

    the market, taking account of country-specificnorms and technical standards.

    Ceiling-suspended medical supply systems arerestricted in the amount of weight they can carrydueto structuralaspects.

    The multiple securing points of the Moduflex

    systems present an advantage in terms of themomentofload.

    All data relevant to a project is submitted forstructural examination andpassed on fortesting.

    The maximum load capacity of the trolleys is 150kg.

    The maximum additional load for each equipment

    carrier or basic support head is calculatedindividuallyforeachproject.

    Moduflex 2500/2600

    EN

    ISO 11197:2005

  • 8/9/2019 En ModulTechnik Moduflex 2500 2600

    12/12

    Rudolf-Diesel-Strae 5

    D-56410 Montabaur

    (Industriegebiet)

    Tel.: (+49)2602/9449-0

    Fax: (+49)2602/9449-11

    e-mail: [email protected]

    www.modul-technik.de

    modul

    RAL 9010pure white

    Our standard RAL-colours (other colours available on request)

    ( )The colours featured in our brochure match as closely as possible the RAL chart

    RAL 5014pigeon blue

    RAL 7035light grey

    RAL 9001cream

    RAL 9002

    grey white

    0366The technical data in brochures as well as weight-, load-, and measure data are provided to the best of our knowledge, errors excepted. We reserve the right

    Moduflex

    2500/

    2600

    -09/05

    -E4

    distributed by:

    medical

    supply systems

    and equipment

    The Quality Management System of modul technik GmbH is certifiedaccording to ,Appendix II of guideline 93/42/EWG (medical products).

    DIN EN ISO 9001:2000, DIN EN ISO 13485:2001


Recommended