Date post: | 02-Jun-2018 |
Category: |
Documents |
Upload: | nenad-bulic |
View: | 218 times |
Download: | 0 times |
of 27
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
1/27
- 0 -
5119 LAN[ENGLISH]
Digital Satellite Receiver
Users Manual
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
2/27
- 1 -
CONTENTS
1. SAFETY ............................................................................................................................ 3
2. ENVIRONMENT PROTECTION ....................................................................................... 3
INFORMATION ON
DISPOSAL FOR
USERS
(PRIVATE HOUSEHOLDS
)IN THE
EUROPEAN
UNION
.......... 3DECLARATIONOFCONFORMITY ................................................................................................. 4
3. REMOTE CONTROL ........................................................................................................ 5
4. SUPPORT & COPYRIGHT ............................................................................................... 6
5. ACCESSORIES ................................................................................................................ 6
6. FRONT PANEL ................................................................................................................. 7
7. REAR PANEL ................................................................................................................... 7
8. CONNECTING YOUR SYSTEM ....................................................................................... 8
HOW TO CONNECT YOUR STBTO VARIOUS SYSTEMS .............................................................................. 8
9. GETTING STARTED ...................................................................................................... 10EASY INSTALL ....................................................................................................................................... 10BOX SETTING ......................................................................................................................................... 10LANGUAGE ............................................................................................................................................ 10TIME SETTING ........................................................................................................................................ 10PARENTAL CONTROL ............................................................................................................................. 10INSTALL SETTING ................................................................................................................................... 10INSTALL YOUR DISH ............................................................................................................................... 10AUTOMATIC INSTALL SATELLITE AND SEARCH CHANNEL ...................................................................... 11MANUALLY INSTALL SATELLITE AND SEARCH CHANNEL ...................................................................... 11
10.MENU OPERATIONS ..................................................................................................... 11
SERVICES ............................................................................................................................................... 11ORGANIZING SERVICES .......................................................................................................................... 11ORGANIZING FAVOURITES ..................................................................................................................... 12
11.INSTALLATION .............................................................................................................. 13
SATELLITE INSTALLATION ..................................................................................................................... 13TERRESTRIAL INSTALLATION (OPTIONAL) ......................................................................................... 17LANSETTING ........................................................................................................................................ 18CASETTINGS (OPTIONAL) .................................................................................................................. 18FACTORY DEFAULT ............................................................................................................................... 19
12.PREFERENCE ................................................................................................................ 20
LANGUAGE ............................................................................................................................................ 20
PARENTAL CONTROL ............................................................................................................................. 20TIME SETTING ........................................................................................................................................ 20
Automatic Update .......................................................................................................................................................................... 21Current Date &Time ..................................................................................................................................................................... 21GMT Offset .................................................................................................................................................................................... 21Daylight Time ................................................................................................................................................................................ 21Wake Up ......................................................................................................................................................................................... 21Wake Up Time ............................................................................................................................................................................... 21Sleep ............................................................................................................................................................................................... 21Sleep Time ...................................................................................................................................................................................... 21
A/VCONTROL ........................................................................................................................................ 21TV-SCART ..................................................................................................................................................................................... 21VCR-SCART .................................................................................................................................................................................. 21Screen Ratio ................................................................................................................................................................................... 21TV Standard ................................................................................................................................................................................... 21Video Brightness ............................................................................................................................................................................ 21Video Contrast ............................................................................................................................................................................... 21Video Saturation ............................................................................................................................................................................ 22
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
3/27
2
UHFSETTING ........................................................................................................................................ 22MISCELLANEOUS SETTINGS ................................................................................................................... 22
13.SYSTEM ......................................................................................................................... 23
SYSTEM INFORMATION .......................................................................................................................... 23UPGRADE RS232 .................................................................................................................................... 23
14.GAME ............................................................................................................................. 23SOKOBAN ............................................................................................................................................... 23
15.INTERNET ...................................................................................................................... 24
16.TROUBLE SHOOTING ................................................................................................... 25
17.SPECIFICATIONS .......................................................................................................... 26
SATELLITE SPECIFICATION ..................................................................................................................... 26TERRESTIAL SPECIFICATION (OPTIONAL) ............................................................................................... 26A/VMODE ............................................................................................................................................. 26MICROPROCESSOR &MEMORIES ........................................................................................................... 26POWER &ENVIRONMENT CONDITION ................................................................................................... 26
PHYSICAL SPECIFICATION ...................................................................................................................... 26CONNECTION ......................................................................................................................................... 26
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
4/27
3
1. SAFETY
This STB has been manufactured to satisfy the international safety standards. Pleaseread the following safety precautions carefully.
MAINS SUPPLY: 100 - 250V AC 50/60Hz
OVERLOADING: Do not overload wall outlet, extension cord or adapter as this mayresult in fire or electric shock.
LIQUIDS: Keep liquids away from the STB. The apparatus shall not be exposed todripping or splashing and that no objects filled with liquids, such as vases, shall beplaced on the apparatus.
CLEANING: Disconnect the STB from the wall outlet before cleaning .Use a light dampcloth (no solvents) to dust the STB.
VENTILATION: The slots on top of the STB must be left uncovered to allow properairflow to the unit. Do not stand the STB on soft furnishings or carpets. Do not exposethe STB to direct sunlight or do not place it near a heater. Do not stack electronicequipments on top of the STB.
ATTACHMENTS: Do not use any attachments that are not recommended as these maycause hazard or damage the STB.
CONNECTION TO THE SATELLITE DISH LNB: Disconnect the STB from the mainsbefore connecting or disconnecting the cable from the satellite dish.
FAILURE TO DO SO CAN DAMAGE THE LNB.
CONNECTION TO THE TV: Disconnect the STB from the mains before connecting ordisconnecting the cable from the satellite dish.FAILURE TO DO SO CAN DAMAGE THE TV.
EARTHING: The LNB cable MUST BE EARTHED to the system earth for the satellitedish.
LOCATION: Place the STB indoor in order not to expose to lightening, rain or sunlight.
2. Environment protection
Attention!Your product Is marked with this symbol. It means that used electrical and electronic products shouldnot be mixed with general household waste. There is a separate collection system for theseproducts.
Information on Disposal for Users (private households)in the European Union
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
5/27
4
Used electrical and electronic equipment must be treated separately and In accordance withlegislation that requires proper treatment, recovery and recycling of used electrical and electronicequipment.Following the implementation by member states, private households within the EU states may returntheir used electrical and electronic equipment to designated collection facilities free of charge*. Insome countries* your local retailer may also take back your old product free of charge if you
purchase a similar new one. *) Please contact your local authority for further details.If your used electrical or electronic equipment has batteries or accumulators, please dispose of theseseparately beforehand according to local requirements.By disposing of this product correctly you will help ensure that the waste undergoes the necessarytreatment, recovery and recycling and thus prevent potential negative effects on the environment andhuman health which could otherwise arise due to inappropriate waste handling.
Information on Disposal for Business Users
In the European Union
If the product is used for business purposes and you want to discard It:
Please contact your local dealer who will inform you about the take-back of the product. You mightbe charged for the costs arising from take-back and recycling Small products (and small amounts)might be taken back by your local collection facilities,
In other Countries outside the EU
If you wish to discard of this product, please contact your local authorities and ask for the correctmethod of disposal.
DECLARATION OF CONFORMITY
The manufacturer herewith declares the conformity of that product with the following directivesand standards:
Low Voltage Directive LVD 2006/95/EGEN 60 065:2002+A1:2006
EMC Directive 2004/108/EGEN 55 013:2001+A1:2003+A2:2006EN 55 020:2007EN 61 000-3-2:2006EN 61 000-3-3:1995+A1:2001+A2:2005
Model:Digital Satellite Receiver DVB-S
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
6/27
5
3. Remote Control
POWER Button
Switch the STB between Operation and Standby mode.
UHF Button
Alter the UHF setting.MUTE Button
Enable / Disable the Audio.
Numeric Buttons
Select the TV or Radio services and menu options.
0/ 0&ZOOM Button
After other Numeric buttons, its used for 0 button. Otherways its used to enable the zoom function.
PAUSE Button
Pause or play video.
PRE Button
Select the previously viewed service.Return to the previous menu.
INFO Button
Display the service information box on the Screen.Display the extended event or service information inmenu.
EPG Button
Display EPG menu.
MENU Button
Display the Main Menu on the screen.Return to the previous menu.
EXIT ButtonCancel the user selection and return to the Screen.
LEFT/V- RIGHT/V+ Buttons
Adjust the volume (Increase / Decrease).Change the value of the selected item in menu.Move cursor left or right in the menu.
UP/CH+ DOWN/CH- Buttons
Service up or down through the available services.Move the selection bar in menu.
OK Button
Display Service List on screen.
Select an item in menu. TV/RADIO Button
Select the TV/Radio mode.
FIND Button
Find service by name in Service List, Organizing Services,Organizing Favourites and EPG menu.
P-/P+ Buttons
Press to move up or down pages on the menus.
FAV Button
Display Organizing Favourites menu.
10. SAT Button
Display Organizing Satellites menu.
P/N Button
Switch the TV Standard on the Screen.
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
7/27
6
TV/SAT Button
Switch the TV or AV mode on the Screen.
F1 Button
Enter Organizing Services menu direct on the Screen.
F2 Button
Enter Manual Installation menu direct on the Screen. WHITE(SUBTITLE) Button
Setup the Subtitle and watch on the Screen.
RED(AUDIO) Button
Perform RED button function in menu.Select Sound Track and Multilingual on the Screen.
GREEN(Multi-picture) Button
Perform GREEN button function in menu.Display Multi-Picture menu on the Screen.
YELLOW(SLEEP) Button
Perform YELLOW button function in menu.
Set Standby time on the Screen .BLUE(TELETEXT) Button
Perform BLUE button function in menu.Setup the Teletext and watch on the Screen.
4. Support & Copyright
To better satisfy our customers, we give our best to each product and service. Also we support ourcustomer through our local sales, service network and electronic server system of us.Moreover, we maintain very close working relationships with our customers. We take a highlydisciplined engineering approach to product design, manufacture, testing, acceptance and to
technical and maintenance support.We conduct comprehensive testing of the units, provide complete documentation support andconsistently deliver the highest quality products on time, every time. We supports you via itshomepage with useful information and new software.To provide you the convenience of usage, We has the right to make changes and improvements toany of the products described in this manual and the manual of the products without notice.
5. AccessoriesCheck the following accessories when you open the box
Users Manual Remoter Control Unit
The device, packaging material and batteries must never be disposed of with household.Please obtain appropriate information about regulations in your community, and dispose of all in
accordance with regulations at the separate locations provided.
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
8/27
7
6. Front panel
POWER KEY: To switch the receiver power on/stand byv ,^ KEY : To change channels, or to move cursor up or down in the menuPOWER Led: Lights up while the receiver is power onRemote Sensor: Detects infrared signal from remote control unitDisplay(4-Digit/7-Segment): Indicates operating status of receiverSignal Led: When receiving signal is strong, the signal led is lighted.VOL KEY (optional): To adjust volume level, or to move cursor left or right in the menuMENU KEY (optional): To enter into the main menuOK KEY (optional): To see TV/Radio channel list, or to confirm in the menuExit (optional): Cancel the user selection and return to the viewing mode from a menu.Card Slot:(Optional) depending on version, one or two Smart Card Interface for CONAX cards.
Insert the Smart Card chip side up!
7. Rear Panel
Please refer to the diagram above for all possible connections of your receiverDo not connect the unit to the mains socket until all other connections have been made andchecked.
A:
B:
AERIAL OUT (optional): This enables the connection of another receiver.AERIAL IN (optional): This port is to connect the coaxial cable from terrestrial antenna.LOOP OUT: This enables the connection of another receiver.13/18V 500mA MAX LNB IN: This port is to connect the coaxial cable from LNB of your Dish.VIDEO: This RCA connector is used to connect any external video.0-12V:This is used to Connect 12V to an external 0V/12V switch.AUDIO R/L:These RCA connectors are used to connect any external audio amp or system.RS 232CSERIAL PORT:This is used to connect your receiver to a computer through
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
9/27
8
a serial cable.TV:This is used to connect your TV through SCART cable.NERWORK: Connection to Internet or local network, It can be update the software Via this port.
VCR This is used to connect your VCR through SCART cable.
SPDIF: Digital Audio interface, connect to AV amplifier SPDIF (optical) input terminal.ANT IN (optional): Connect to Analog TV antenna.TV OUT (optional): This is used to connect your TV through RF cable.
8. Connecting Your System
How to connect your STB to various systemsThere are several ways of connecting the STB to your TV, VCR and/or Hi-Fi SYSTEM. Consult yourlocal supplier for assistance in setting-up your system that is best suited to your requirements.
Connect STB to a TV setConnect your STB to a TV set with SCART, if your TV set is equipped for it. Alternatively you canuse A/V, TV out (UHF) jacks.
Connect STB to a VCRConnect the SCART jack from the VCR to the back of your STB. Alternatively you can use A/V, TVout (UHF).
Connect STB to a Hi-Fi SystemConnect a RCA stereo cable from the AUDIO L/R jacks, on your STB to the LINE, AUX, SPARE orEXTRA input jacks on your Hi-Fi System.
Connect STB to a Digital Audio SystemIf you have a DAC with S/PDIF optical fiber input, you can connect the STB with it to enjoy higher
quality sound. Connect S/PDIF optical fiber to a digital amplifier.
Loop ThroughIf you have another analogue or digital STB and you wish to use the same LNB then you canconnect it via the loop through. Connect one end of the coaxial cable to the Loop Through on theSTB and connect the other end to the LNB IN on your second STB.
TV with Motorized System (DiSEqC 1.2)
A:
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
10/27
9
B:
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
11/27
10
9. GETTING STARTED
Easy InstallPress the POWERbutton to operate thereceiver from Standby mode. If you did not
install it before, the Easy Install Menu will bedisplayed automatically to guide you to installyour box and dish.*Notice: There are two parts, Box Setting andInstall Setting. Please follow the indication inthis menu one step by one.
Box SettingLanguage
Choose Menu Language. Go to next.
Time SettingSet Current Time. Go to next.
Parental ControlSet Password, Receiver Lock and CensorshipClassification. Go to next to enter in InstallSetting.
Install Setting
Choose one from the following items: Install
your dish, Automatic install satellite andsearch channel and Manually install satelliteand search channel.
Install your dish
a. Install one satellite, Press REDbutton to
edit it. In edit menu you can check signal.This function is very useful for installing
your dish. It will automatically calculate the
elevation and azimuth for certain satellite
according to the local longitude and latitude
you entered. Set the longitude and latitude
by pressing 0~9and LEFT /RIGHTbutton,
and you get the elevation and azimuth
information from the menu. Then go to next.
b. Adjust your dish depend on the intensity
and quality. Press RED button to edit
satellite as above, press OK button to select
TP. Go to next.
c. Adjust your dish depend on the SNR and
BER. Press REDbutton to edit satellite as
above, press OKbutton to select TP. Go to
next.
d. Choose one from the following items:
Install another satellite and Complete
installing dish and search channels. ForInstall another satellite, you need to install
another satellite the above step by step. For
Complete installing dish and search
channels, you need to set the Scan Mode
and Network, then press OKbutton to do
scan.
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
12/27
11
Automatic install satellite andsearch channel
The receiver will detect your antenna andsearch available signals and download services
for you automatically.
Manually install satellite andsearch channelYou need to choose your interested satellitesand set right parameters for LNB Type, 22KHzTone, 12V, DiSEqC1.0 or Motorized DiSEqC1.2or USALS items, then press REDbutton to doscan to complete install. For more details,please check chapter Installation of MenuOperations.
10. MENU OPERATIONS
Services
Organizing Services
The menu displays as the following:
- Service list, Group information
- Operating frame with Move, Lock, Delete,
Rename, Skip functions
Operations:LEFT/RIGHT button:switch frame from servicelist to operating frame or verse
RED button: enter Group menu to switch
service group
GREEN button: enter Options menu for 4
shortcuts for choosing services:
Select All:select all services under current listUnselect All:unselect all selected servicesSelect Others:select services except those
been selectedSelect by TP:select services belonging tocertain transponder only
TV/RADIO button:switch from TV service list
to the Radio service list or verse
FIND button:quickly find service by the name
UP/ DOWN, P+/P-, OK button:browse service
list and select some
INFO button:check detail information of
current service
Move: select one or more services and press
RIGHT button to select MOVE icon. Press
UP/DOWN, P+/P-, 0~9button to move the
selected service to where you want to locate,
then all the selected services will be reordered
and move to the new location one by one.
Lock: select one or more services and press
RIGHTbutton to select LOCKicon. The symbol
LOCK will be displayed at the end of the
service name, which means the service is
locked and need to enter password to view.
Remove: select one or more services and
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
13/27
12
press RIGHTbutton to select REMOVEicon.
The selected services will be removed from the
database forever.
Rename: select one or more services and
press RIGHTbutton to select RENAMEicon.Rename menu will be displayed, you can
enter new name through keyboard submenu.
Skip: select one or more services and press
RIGHTbutton to select SKIPicon. The symbol
SKIPwill be displayed at the end of the service
name, which means the service will be
skipped when you browse services without any
menu by pressing UP/DOWNbutton.
Organizing Favourites
Youcan organize all 8 FAV group services in thismenu.The menu displays as the following:
- Service list, Group information
- Operating frame with Move, Lock, Delete,
Rename, Skip functions
- FAV service list, FAV information
Operations:
LEFT/RIGHT button: switch frame between
service list, operating frame, FAV service list
RED button:enter Group menu to switch
service group
GREEN button:enter Options menu for 4
shortcuts for choosing services:
-Select All:select all services undercurrent list-Unselect All:unselect all selectedservices-Select Others:select services except
those been selected-Select by TP:select services belonging tocertain transponder only
FAV button:enter FAV menu to switch FAV
group
TV/RADIO button:switch from TV service list
to the Radio service list or verse
FIND button:quickly find service by the name(only available in service list)
UP/ DOWN, P+/P-, OK button:browse service
list / FAV service list and select some
INFO button:check detail information of
current service (only available in service list)
MOVE (only available for FAV service list):
select one or more FAV services and press
LEFT button to select MOVEicon. Press
UP/DOWN, P+/P-button to move the selected
service to where you want to locate, then all the
selected services will be reordered and move to
the new location in current FAV group service
list one by one.
MOVE TO FAV GROUP:
select one or more services and press RIGHT
button to select RIGHT MOVEicon. The
selected services will be added to current FAV
group.
REMOVE FROM FAV GROUP:select one or more FAV services and press
LEFT button to select LEFT MOVEicon. The
selected services will be removed from current
FAV group list, but still remain in database and
belong to other FAV groups it was belonging to.
RENAME:
rename FAV group. Go to operating frame and
select RENAMEicon. Rename menu will be
displayed, you can enter new FAV name
through keyboard submenu.
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
14/27
13
11. INSTALLATION
Satellite Installation
Manual Installation
Manual Installation menu is organized in theway for user to install & scan satellites/transponders easily. In all menus of ManualInstallation, real-time signal level and quality(BER) is displayed all the time for more friendlysetting.There are three main submenus:
Main window
The menu displays as the following:- Satellite list
- Indication frame with Antenna, 12V, 22KHz,
DiSEqC, Motor information for current
satellite
- A map for the location of satellite
We supply the following functions:
A. Scan
1. Use OKbutton to select one or more
satellites at one time, then press RED
button, an Scan menu will be
displayed for you to select Scan Mode
(ALL, FTAL, FTA_TV, ALL_TV) and
Network (NIT OFF, NIT ON) options by
LEFT/RIGHTbutton.
2. Press OKbutton to start scan.
3. During scanning, you can use RED
button to stop scan, useYELLOW
button to pause scan and GREEN
button to resume scanning.
4. When scanning finished, a message
box will be displayed asking you
whether to save themodification before
exit. PressYES button to save and NO
button to abort.
B. Auto DiSEqC
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
15/27
14
This function is very useful to easy installingyour system without knowledge of what kindof signal or LNB your receiver is connectedto. Press BLUEbutton, it will automaticallydetect DiSEqC connecting and set the rightconfiguration of LNB as well. In less than 1
minute, it will show you the connectingstatus, you just need to press OKbutton toscan the connected satellites if any.
C. Edit
Press GREENbutton to enter next mainpart: Edit Satellite menu.
D. TPPressYELLOWbutton to enter next main part:Transponder menu.
Edit Satellite
The menu displays as the following:
- Satellite setup menu
- Indication picture for the connecting of
antenna and DiSEqC switcher, Motorized
system.
We supply the following functions:
1. Press REDbutton to scan certain satellite
2. Press GREENbutton to enter keyboard
menu to rename certain satellite
3. Press BLUEbutton to enter Auto DiSEqC
menu to check your dish connecting
4. Setup satellites parameters as the
following:
- Satellite: Remand certain satellite by using
GREENbutton;
- Longitude: The angle of satellites
longitude is can not be changed;
- TP: Select the TP of certain satellite. Press
OKbutton to select one from the list or
press LEFT/RIGHTbutton to switch one by
one
- LNB: Select the LNB (value & type) on
antenna. Press OKbutton to select one
from the list or press LEFT/RIGHTbutton to
switch one by oneNotice: When you select Uni. (9750/10600), both 9750 and 10600MHz aresupported at the same time, the 22KHzTone setting is unnecessary(disabled),because high or low band is selected by22KHz automatically
- 22KHz: Press OKor LEFT/RIGHTto turn
22KHz Tone switcher on or off.
Notice: When you use a dual LNB or twoantennas connected to a 22KHz Toneswitch box, make 22KHz Tone switch on or
off to select LNB or antenna.- 12V: Press OKor LEFT/RIGHTto turn 12V
switcher on or off
- DiSEqC 1.0/1.1:According to the option
and position of DiSEqC switcher, select
OFF(disabled), DiSEqC A to D by OKor
LEFT/RIGHTbutton, it supports up to 16
antennas connected to the receiver at the
same time.
- Motor:Press OKor LEFT/RIGHTto set
motor on or off; pressYELLOWbutton to
enter Motor menu
Motor Menu:
a) Motor Type
Press LEFT/RIGHTbutton, you canselect DiSEqC1.2 or USALS(DiSEqC1.3), according to themotorized DiSEqC system you areusing.
b) Satellite
Select a satellite name that can be used
to identify a motor position by pressingOKor LEFT/RIGHTbutton. Thelongitude of current satellite will beshown too.
c) TP
Press OKor LEFT/RIGHTbutton, youcan select one transponder from currenttransponder list to locate the signal.
d) Setup Motor
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
16/27
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
17/27
16
Transponder
The menu displays as the following:
- Transponder list
- Indication frame for the information of
current satelliteWe supply the following functions:
A. Scan
1. You can use UP/DOWN, P+/P-buttons to
browse the transponder list and press OK
button to select one or more transponders
at one time, then press RED button. An
Scan Option menu will be displayed for
you to select Scan Mode (FTA, ALL,
FTA_TV, ALL_TV) and Network (NIT OFF,
NIT ON) options by LEFT/RIGHTbutton. Be
noticed that if you select only one
transponder, you are able to scan certain
service only by putting certain VidPID,
AudPID and PcrPID by manual.
2. Press OKbutton to scan selected
transponder(s).
B. Add / Edit
Press GREEN or YELLOW button, you canedit the parameters.
Freq.:Use 0-9 buttons or LEFT/RIGHTbutton to enter new frequency.H/V: Use the LEFT/RIGHTbutton to selectthe polarization (H, V).H(Horizontal): 18V/19V is output throughLNB cable
V(Vertical): 13V/14V is output through LNBcableSym.: Use 0-9 buttons or LEFT/RIGHTbutton to enter new symbol rate.FEC: Use LEFT/RIGHTbutton to select theForward Error Correction (1/2, 2/3, 3/4, 5/6or 7/8) if you are sure about the value,otherwise please select AUTO, software willautomatically detect it for you.
C. Delete
Select one or more transponders you dont
need any more by pressing OKbutton.Then press BLUEbutton to delete them. Benoticed that all services belonging to thedeleted transponder will be deleted too.
D. Services
Press INFObutton, you can check services(TV and Radio) belonging to currenttransponder if any.
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
18/27
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
19/27
18
Configuration
In this menu, you can press LEFT/RIGHTkeyto select the Regions and set the AntennaPower on or off.
LAN Setting
Select LAN Setting under the Main Menu, thenpress OK button to confirm.
In this menu, you can set Parameters (IPAddress, Subnet Mask and Network Gate) ofthe network.
If you select the DHCP Enable, means thereceiver can get the parameters automatically.
If you unselect the DHCP Enable, than you canset the parameters manually .
CA Settings (OPTIONAL)
Receiver has build in smart card module withCONAX system. By using cards in this systemprovided by operators, it is possible to watchmany scrambled channels coded in this system.This menu shows detailed information aboutcard inserted into card reader module. It allowsto check all available information about cardinserted according to help messages visible onthe bottom of the screen.
NOTE:All information showed in this menu andsubmenu are coming from inserted card. Incase if anything is wrong, it could be cardproblem. After inserting the card correctly at anytime, a message-box will show on the screenwith message about detecting the card, in CardInfo menu all available information will bedisplayed.
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
20/27
19
Factory Default
Restore channels Data
PressOK button to load default data to currentdatabase.Press MENU/EXITbutton to abort theoperation.
Factory reset
Press OK button to do factory reset, which will
recover all database to the same as factorydefault settings, then it will automatically go toEasy Install menu to re-install your system.Press MENU/EXIT button to abort theoperation.
Backup channel data
Press OK button to set current database asdefault data.Press MENU/EXITbutton to abort theoperation.
Delete all channels
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
21/27
20
Press OK button to delete all channels.Press MENU/EXITbutton to abort theoperation.
12. Preference
The Preference menu supports the receiverinternal settings according to the connection ofthe receiver and external units. This menuincludes Language, Parental Control, TimeSetting, A/V Control, UHF Setting andMiscellaneous Settings.
Language
There are different kinds of languages, formenu, for audio, for EPG, for Teletext orSubtitle. You can use UP/DOWNbutton toselect one of them and then press OK button toenter submenu. Use LEFT/RIGHTbutton toswitch language one by one or press OK button
to select one from the language list.The details are as the following:
Menu LanguageAudio LanguageAudio PriorityEPG LanguageTeletext LanguageSubtitle LanguageSubtitle Display
Parental Control
Set Parental Control options to protectchildren watching programs. Please useUP/DOWNbutton to select one of the followingitems and press LEFT/RIGHTor OKbutton toset certain value.
Details are as the following:Receiver Lock: The default PIN code is 0000.
Censorship ClassificationAllow Time ControlChange Password
Time SettingYou can set system time, sleeping time andwakeup time in this menu. Furthermore, youcan set first view service in wakeup time mode.When a VCR is connected, recording can beautomatically validated/invalidated according towakeup/sleeping time setting. Please useUP/DOWNbutton to select one of the following
items and press LEFT/RIGHTor OKbutton toset certain value.
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
22/27
21
Details are as the following:
Set Automatic Update option to ON meanssystem time is based on TDT (Time and DataTable) from the stream of the current service,
and runs with system clock. Set AutomaticUpdate option to OFF means system time isset by manual and runs with system clock.
Automatic Update
Only when you set Automatic Update option toOFF, Current Date &Time is active for you toenter local date & time by LEFT/RIGHTor 0~9buttons.
Current Date &Time
GMT is referred to the standard time ofGreenwich. Please set the Offset according to
your countrys time zone. The step is half anhour.
GMT Offset
Set Daylight Time option to ON means thesummer time is on thus local time is one hourlate than normal.
Daylight Time
If you set Wake Up option to Enable, youactivate a wakeup timer. The service list will bedisplayed for you to set first view service using
UP/DOWNbutton.
Wake Up
Only if you set Wake Up option to Enable,Wake Up Time is active for you to set wakeuptime using UP/DOWNbutton.
Wake Up Time
If you set Sleep option to Enable, youactivate a sleeping timer.
Sleep
Only if you set Sleep option to Enable,Sleep Time is active for you to set sleepingtime using UP/DOWNbutton.
Sleep Time
A/V Control
You can set SCART, screen ratio and TVformat, Video picture parameters in this menuaccording to the TV set connected to the
receiver. Please use UP/DOWNbutton to selectone of the following items and pressLEFT/RIGHTor OKbutton to set certain value.Details are as the following:
Set the video output mode for the TV SCART(RGB, CVBS and YUV (special cable requiredfor connecting YUV signal to TV set )).
TV-SCART
Set the video output mode for the VCR SCART(CVBS only).
VCR-SCART
Set the screen aspect ratio of the TV setconnected to this receiver (Auto, 16:9 Full, 4:3Full, 16:9 Letter Box or 4:3 Letter Box).
Screen Ratio
Set the format of the TV set connected to thisreceiver (AUTO, PAL, NTSC, or SECAM). InAUTO mode, the receiver set the format to theone same as service viewed before enter thismenu, and automatically follows current
services format whenever current servicesstream format changes.
TV Standard
Set the video brightness for receiver output. Itranges from 1 to 8, and is independent of theTV set connected to the receiver.
Video Brightness
Set the video contrast for receiver output. Itranges from 1 to 8, and is independent of theTV set connected to the receiver.
Video Contrast
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
23/27
22
Set the video saturation for receiver output. Itranges from 1 to 8, and is independent of theTV set connected to the receiver.
Video Saturation
UHF Setting
You can set UHF parameters in this menuaccording to the TV set connected to thereceiver. Please use UP/DOWNbutton to selectone of the following items and pressLEFT/RIGHTor OKbutton to set certain value.
Details are as the following:UHF ChannelPAL FormatUHF Offset
Miscellaneous Settings
You can set other miscellaneous settings in thismenu by using UP/DOWNbutton to select oneof the following items and press LEFT/RIGHTor OKbutton to set certain value.
Details are as the following
Banner Display TimeOSD TransparencyService Switch Mode
Beep FrequencySignal Beep Level
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
24/27
23
13. System
You can check information about your receiveror upgrade the firmware or data of the receiver
through this menu.
System InformationWe provide you production information aboutthe receiver, such as Model ID, SoftwareVersion, Hardware Version, Loader Version,Latest Update and Manufacture informationas well.
Upgrade RS232We provide you two solutions to upgrade thereceiver via RS232 port.
A. Upgrade through this menu.1. Connect your receiver (as slaver) to PC
or another receiver (as master) via cross RS232cable. (The PC should have installedUpgrade.exe together with current software ordata file (*.dld).) Turn on the master.
2. Enter this menu, and select one of thefollowing options, you can download newsoftware, data or all (software and datatogether) from the master to your receiver.B. Upgrade automatically once turn it on
1. Do the same as 1 in A.
2. Turn on the slaver, the slaver will beupgraded all automatically.
Upgrade SoftwareUpgrade DataUpgrade DefaultUpgrade Data & DefaultUpgrade AllUpgrade OTA (Optional)
14. Game
Receiver has one game for you. Please enjoy it.
Sokoban
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
25/27
24
15. Internet
Select the Net Config item, press OK button
to enter.
In this sub-menu, you should input the
parameters of Default Server, Default Server
IP and Serial Num, You can take it from your
provider, Dont forget press Red button to
confirm after you complete inputting.
Select the Net Manual Upgrade item, press
OK button to enter.
The software will displayed in the list, Select the
desired software and press Red button to start
upgrade.
WARNING! After changing software your
channels list and settings will be changed.
WARNING! Do not power off receiver when
changing software, please wait until software
upgrade is complete.
WARNING! Software on server is should be
from known source. Software on servers is put
by server administrator. Producer is notresponsible for problems caused by using
wrong or defective software.
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
26/27
25
16. Trouble Shooting
If you suspect there is a fault with your receiver, please check the following trouble shooting guide
before calling authorized service agent.
Warning! Under no circumstances attempt to repair the receiver yourself. Tampering with the
receiver may result in fatal electric shock and will invalidate your warranty.
Symptom Possible cause
Settings you made in themenu have not change
The receiver lost power before being able to enter into standbymodeSome of the Settings saved by user can be deleted partly or fully
No signal The level of signal is weakLNB is out of orderThe cable from the LNB is incorrectly Connected (short circuit or
open circuit)The position of dish is aligned incorrectly
Receiver is on but no pictureor sound except the followingmessages (NO TV program)
Channel is not availableChannel is scramble
Receiver not responding toremote control unit
RCU batteries are dead or inserted incorrectlyThe RCU is pointing toward wrong direction
Poor picture Quality The level of Signal strength is low
No sound RCA cable is connected incorrectly
The Volume level is lowMuting function is active
No display on the LED DisplayPanel
The power cord is not plugged in correctly.
No picture on the screen Receiver is in Standby modeRCA Jack is not connected firmly to the video output port oftelevisionIncorrect channel or video output is selected on televisionBrightness level of your TV set is incorrectly defined
8/10/2019 En User Manual 5119 Lan 14 IV 2009 1.Original
27/27
17. Specifications
Satellite specificationSystem standard Fully MPEGII/DVB CompliantChannel Storage Max.4000 TV and Radio Channels totally
Input Frequency 950~2150MhzRF Input level -65~-25dBmLNB Control DiSEqC1.0/1.2LNB Power 13V/18V (Max, 500mA)LNB tone switch 22KHZWaveform QPSK (SCPC, MCPC capable)Symbol rate 2~45Mbps
Terrestial specification (optional)System standard Fully MPEGII/DVB CompliantInput Frequency 170-230MHz CH5-CH12, 470-860MHZ CH21-CH69RF Input level -87~-20dBm
Antenna power 5V/50mA maxDemodulation COFDM 2K/8KNumber of carriers 1705/6817Constellation QPSK, 16QAM, 64QAMGuard Inter Val 1/4, 1/8, 1/16, 1/32FEC Decoder 1/2, 2/3, 3/4, 5/6, 7/8, k=7
A/V ModeVideo format MPEG-II Main profile/Main levelAudio format MPEG-II layer I&IIAspect Ratio 16:9, 4:3Audio sampling rate 32,44.1, 48kHzAudio Type Mono Dual Mono, Stereo, Joint stereo
Graphic display 720x576(PAL), 720x480(NTSC)
Microprocessor & MemoriesProcessor 200 MIPS based CPURAM 128MbitsFLASH 32Mbits
Power & Environment ConditionSupply Voltage Free Voltage (100~250V AC, 50/60Hz)Supply Power Max.30W
Physical SpecificationLED display 4DigitsWeight 2.0KgDimensions 300(W) x 235(D) x 65(H)mm
260(W) x 185(D) x 57(H)mm
ConnectionSatellite IF input F-type (Digital)Satellite IF loop out 950-2150MHzRS232 9 way D Rs232 DCE serial portScart TV/VCRVideo RGB, CVBS, YUVAudio Audio left, Audio rightControl Output 0/12V out
Modulator UHF CH 21-69 Adjustable (Optional)
Specification is subject to change without notice.