Endeavor Snowboards launched it’s first series of snowboards in 2002 featuring a full topsheet of carbon fiber. Eleven years on and Endeavor still seeks innovation with research and development at the Archetype Snowboard Lab in Vancouver, Canada. The mandate is simple - make the best riding experience possible! The Archetype Lab develops the future for Endeavor, providing a platform to take an idea to prototype in 24 hours.
Only those who will risk going too far can possibly find out how far one can go. - T.S. Eliot
Today’s Ideas Set Tomorrow’s Standards.
In 2011, Endeavor Snowboards built a prototyping facility in Vancouver called Archetype. This lab was created to build snowboards that would enhance the riding experience. The Archetype Series is Endeavor’s lightest and is the preferred board on a pow day.
ARCHETYPE
156cm 159cm
ARCHETYPE
BOARD DESIGNTECH BRIEFING
PRETENSIONED CARBON GLASSPOP OFF THE SNOW WITH POWER AND ENERGY
C-TECH PHANTOM CORESTHE ULTRA LIGHT WOODCORE.
ENGINEERING INSIGHTS
ARTIST STATEMENT WHO RIDES IT?
HOVER CAMBER Camber under foot and reverse camber rise out to the nose contact points, this is a directional version of our successful Multi-Camber. Designed to create maximum lift in the nose while having tons of pop and responsiveness for getting through tight tree lines.
This is anything but your average snowboard glass. Pulled tight under tension, pressed with heat and infused with the perfect resin to glass ratio, this carbon reinforced laminate completely replaces the heavy plastic top sheet of the board. This shaves 1/2 pound of weight and makes the board one of the most responsive and poppy flexes ever ridden.
Grown in eastern Canada this wood is so light that it shaves 18% of the weight off a finished snowboard.
Dark Arts and Black Magic. That’s how these boards are made. So we embraced it with symbols from the occult and fortune telling rendered by hand.
http://hovercraftstudio.com
It’s futuristic, no compromise and finely tuned tech.
NOSE TAIL
SOFT FLEX STIFF FLEX
POWDER
ALL MOUNTAIN
PARK
SINTERED 7500
HIT STEEP RUNS CHARGE HELLA’ FAST
FLOAT ON DEEP POW NAVIGATE TIGHT TREES
CARBON FIBRE BEAMS
DIRECTIONAL SHAPE
STONE GRIND BASE FINISH
TAPERED SHAPE FACTORY TUNED
ARCHETYPE
TAPERED SHAPEKEEP YOUR NOSE ABOVE POW
With a slightly longer nose than the tail, directional boards are designed for all mountain riding and to float in soft snow. Adding a slight taper sinks the tail and raises the nose for effortless float in deep snow conditions, but also makes exiting turns easier on groomed runs.
HOVER CAMBEREXTRAKICK
2014
New for 2014, the Clout raises the bar of technological innovation. Pretensioned glass laminates eliminate the traditional cloth reinforcement with the heavy plastic top sheet found in most snowboards. This technology offers any rider the tool to advance their level of riding.
CLOUT
156cm
153cm 159cm
CLOUT
BOARD DESIGNTECH BRIEFING
PRETENSIONED GLASSPOP OFF THE SNOW WITH POWER AND ENERGY
RUBBER SIDEWALL INLAYSCUSHIONING FOR THE BANGS AND BUMPS
PHANTOM COREAS LIGHT AND MYSTERIOUS AS CASPER
ENGINEERING INSIGHTS
ARTIST STATEMENT WHO RIDES IT?
POP CAMBER Completely flat between the bindings and camber down to the contact points, Pop Camber is designed to give the most energy transfer and pop possible. This camber profile is ideal for jumps and riders that like a fast and snappy board.
This is anything but your average snowboard glass. Pulled tight under tension, pressed with heat and infused with the perfect resin to glass ratio. This carbon reinforced laminate completely replaces the heavy plastic top sheet of the board. This shaves 8% of weight and makes the board one of the most responsive and poppy flexes ever ridden.
The rubber sidewall inlay absorbs pressure on impact and minimalizes sidewall damage as well as dampening vibration on hard snow easing leg fatigue.
The Phantom Wood Core boasts a 15% reduction in weight compared to the Standard Wood Core, making the deck lighter and more responsive.
The Clout graphic started with this question... “If I went down into a secret robot laboratory, what would the stuff down there look like?” I think I found the answer.
The graphic is stripped down and utilitarian. However, the exclusive neon base colour and the unique camouflage spot varnish give it enough ‘black-ops’ attitude to match the engineering in the board.
A declassified park/pipe/freestyle weapon, the Clout is not to be underestimated. This board is not for the lazy rider with a hangover.
ALL MOUNTAIN
PARK
PIPE
SINTERED 7500
HIT RUNS SPIN TO WIN
BLACK PARK LAPS 1/2 PIPE
STONE GRIND BASE FINISH
TWIN SHAPE STITCHED SIDEWALLS
CARBON BEAMS FACTORY TUNED
CLOUT
http://edburdick.co.uk
NOSE TAIL
FLAT ZONEPOPCAMBER
POPCAMBER
SOFT FLEX STIFF FLEX
The B.O.D. stands for the Board Of Directors and is the pride and joy of the Endeavor crew. The B.O.D. is a tech-laden board which stands at the pinnacle of performance and design with zero camber, true twin and Dow Tech. Dow Tech at the contact points eliminates edge hook and creates a much looser, fun ride.
B.O.D.
158cm 155cm 161cm
149cm 152cm
BOARD OF DIRECTORS
BOARD DESIGNTECH BRIEFING
DOW-TECHRAISED CONTACTS
BASALT FIBERGLASSDECLASSIFED MILITARY TECHNOLOGY
CARBON FIBRE BEAMSMEMORY STRIPS THAT INCREASE YOUR POP
ENGINEERING INSIGHTS
ARTIST STATEMENT WHO RIDES IT?
ZERO CAMBERW/ DOW-TECH
With no pressure on the contact points due to the raised wings, this board feels loose and catch-free like a reverse camber board, however it remains more stable and predictable like a regular camber board.
Dow-Tech raises the contact points 2mm off the snow creating a ride similar to a reverse camber without loosing the benefits of a camber board.
An eco-alternative, basalt is the premium aerospace material made from molten basalt and was declassified by the military in 1995. An unparalleled strength-to-weight ratio gives our premium freestyle boards added performance, elasticity, and durability.
Strategically placed carbon stiffens the board without adding weight and increases the response by adding flex memory and pop.
All aspects of the five boards including the design on the back of the boards are hand drawn and unique. In total 30 individual illustrations had to be created to complete these boards. The theme was based on futuristic space disaster, mixing skulls of astronauts and fragmented planets, satellites, and space shuttles.
This deck is used as the standard that snowboards are measured off, with award, after award, after award.
ALL MOUNTAIN
PARK
POWDER
SINTERED 7500
TECH SAVVY RIDERS PARK BURNERS
MOUNTAIN SLAYER POW IS MY BUSINESS
PHANTOM CORE
TWIN SHAPE
RUBBER SIDEWALL INLAYS
FACTORY TUNED
BOARD OF DIRECTORS
STITCHED SIDEWALLS
http://alexismarcou.com
NOSE TAIL
ZERO CAMBERDOWTECH
DOWTECH
SOFT FLEX STIFF FLEX
The Next Series is a freerider’s dream. Taper in the tail allows it to sink slightly, which in turn lifts the nose making pow riding a breeze. Incredible to look at, the satin finished bamboo veneer topsheet serves a functional purpose of stiffening the board without the need of extra glass or carbon. Finished off with a sublimated sintered 7500 base for speed and a Phantom wood core for flex memory and pop.
NEXT
157cm 162cm 165cmWIDE
154cm 159cm
NEXT
BOARD DESIGNTECH BRIEFING
TAPERED SHAPEKEEP YOUR NOSE ABOVE POW
Bamboo Wood VeneerKeep away from Panda Bears
Phantom CoreAs light and mysterious as Casper
ENGINEERING INSIGHTS
ARTIST STATEMENT WHO RIDES IT?
HOVER CAMBER Camber under foot and reverse camber rise out to the nose contact points, this is a directional version of our successful Multi-Camber. Designed to create maximum lift in the nose while having tons of pop and responsiveness for getting through tight tree lines.
With a slightly longer nose than the tail, directional boards are designed for all mountain riding and to float in soft snow. Adding a slight taper sinks the tail and raises the nose for effortless float in deep snow conditions, but also makes exit-ing turns easier on groomed runs.
A thin veneer of exotic, high-end bamboo creates an amazing aesthetic look while enhancing the flex and strength of the board.
The Phantom Wood Core boasts a 15% reduction in weight compared to the Standard Wood Core, making the deck lighter and more responsive.
I wanted to keep the content simple but strong enough to work in harmony with the bamboo top sheet. We used a wide range of color but this time instead of flooding it, the color was overlaid enough to be prevalent but still allow for the grain behind it to show through. Combining that with the content of old gangs, legions and other conjured up products really brings a high quality look to this amazing series.
The Next is for the rider who lives for pow. It is stiff, responsive, stable, and reliable.
ALL MOUNTAIN
PARK
POWDER
SINTERED 7500
MOUNTAIN BOMBERS SHIN CAMPOS
POW HUNTERS BACKCOUNTRY HIKERS
CARBON FIBRE BEAMS
DIRECTIONAL SHAPE
TRIAX FIBERGLASS FACTORY TUNED
STITCHED SIDEWALLS
NEXT
http://cargocollective.com/rorydoyle
NOSE TAIL
HOVER CAMBEREXTRAKICK
SOFT FLEX STIFF FLEX
Flat kicks, double carbon beams, phantom woodcore, super camber, rubber sidewall inlays and basalt glass...... the High 5 is a beast just waiting to be unleashed. Hands down, the most aggressive performance board in the Endeavor line, this board is loaded with pop that demands respect. Snap from edge to edge at lightning speed, blast off park hits with aggression and even float pow with ease.
HIGH 5
155cm 157cm 159cm
151cm 153cm
HIGH 5
BOARD DESIGNTECH BRIEFING
BASALT FIBERGLASSDECLASSIFED MILITARY TECHNOLOGY
RUBBER SIDEWALL INLAYSCUSHIONING FOR THE BANGS AND BUMPS
ENGINEERING INSIGHTS
ARTIST STATEMENT WHO RIDES IT?
SUPER CAMBERW/ FLAT KICKS
The super camber with flat kicks rides like a longer snowboard because of the quick radius to flat on the nose and tail. 15mm of Super Camber means an unbelievable amount of stored energy just waiting to be released.
An eco-alternative, basalt is the premium aerospace material made from molten basalt and was declassified by the military in 1995. An unparalleled strength-to-weight ratio gives our premium freestyle boards added performance, elasticity, and durability.
The rubber sidewall inlay absorbs pressure on impact and minimalizes sidewall damage as well as dampening vibration on hard snow easing leg fatigue.
The Hi5 series by Daniel Curtis was created by ripping it up and rebuilding. The aim of the the process was to have as much fun as possible making them. The ingredients are many of his favorite artifacts he has collected on adventures.
Don’t let the neon fool, the H5 is aggressive as they come with super camber and it may lift the rider higher than they think off a bump.
SUPER CAMBER W/ FLAT KICKS
PARK
ALL MOUNTAIN
POWDER
SINTERED 7500
THE KING OF POP TRANSITION SLAYERS
BIG BOOTER JUMPERS
ANDY NUDDS
INSERT RETENTION PLATES
FACTORY TUNED
TWIN SHAPE
CARBON BEAMS
STITCHED SIDEWALLS
PHANTOM COREAS LIGHT AND MYSTERIOUS AS CASPER
The Phantom Wood Core boasts a 15% reduction in weight compared to the Standard Wood Core, making the deck lighter and more responsive.
HIGH 5
http://danielcurtis.ca
NOSE TAIL
SUPER CAMBER W/ FLAT KICKS
SOFT FLEX STIFF FLEX
The Live is one of the best sellers in the Endeavor line-up and this year it has a new camber story. The board is camber 75% of the board length with a 3mm reverse camber before the contact points. This directional twin is the board that everyone can ride and have fun on. It doesn’t matter if it is the rider’s first day on the hill or an advanced level rider, the Live can do it all.
LIVE
148cm 151cm 153cm 156cm
159cm 163cm 153cm 161cmWIDE
157cmWIDE
LIVE
BOARD DESIGNTECH BRIEFING
CARBON FIBRE BEAMSMEMORY STRIPS THAT INCREASE YOUR POP
MUTLIVIBRATION DAMPENINGNO NEED TO WEAR A MOUTH GUARD
ENGINEERING INSIGHTS
ARTIST STATEMENT WHO RIDES IT?
MULTI CAMBER This board has traditional camber between the bindings for pop and a 3mm rise of reverse camber out to the contact points for a fun, float in soft snow and a hook-free ride.
Strategically placed carbon stiffens the board without adding weight and increases the response by adding flex memory and pop.
Strategically placed in areas, the dampening will eliminate unwanted high-frequency vibrations on hard snow and increase the bond between the various laminates in a board.
The Cold Front mural was created as a mash up of my own personal interest in bold graphics and comic book art and symbols/characters that represent both the Endeavor company and the location of Vancouver. Was a fun challenge to bring all these elements together in the theme of ‘Cold Front’ and create a dynamic, site-specific mural for the Endeavor head offices.
The do anything board that does not fail. Throw park, pow, street, ice at it and it won’t let the rider down. If there is only one deck in a board bag, the Live has to be it.
ALL MOUNTAIN
PARK
POWDER
SINTERED 7500
POW LINE BOMBERS KAREEM EL RAFIE
PARK BURNERS POP LOVERS
INSERT RETENTION PLATES
FACTORY TUNED
DIRECTIONAL TWIN SHAPE
TRIAX FIBERGLASS
STITCHED SIDEWALLS
PHANTOM COREAS LIGHT AND MYSTERIOUS AS CASPER
The Phantom Wood Core boasts a 15% reduction in weight compared to the Standard Wood Core, making the deck lighter and more responsive.
LIVE
http://www.houseofmeggs.com
NOSE TAIL
CAMBER ReverseCamber
ReverseCamber
SOFT FLEX STIFF FLEX
The first child of the Archetype R&D Lab, the goal was simple: to create a completely new style of board that is stable yet loose, aggressive yet fun and soft yet poppy. Wider than the average deck, this board is designed to be ridden 3-4cm shorter than the typical board. The brand new Dow-Tech 2 technology will make sure that it will never hook an edge.
NEW STANDARD
151cm 154cm 157cm
145cm 148cm
NEW STANDARD
BOARD DESIGNTECH BRIEFING
DT-2RAISED CONTACTS
ENGINEERING INSIGHTS
ARTIST STATEMENT WHO RIDES IT?
ZERO CAMBERW/ DOW-TECH2
With no pressure on the contact points due to the raised wings, this board feels loose and catch-free like a reverse camber board, however it remains more stable and predictable like a regular camber board.
Dow-Tech 2 raises the contact points 3mm in height and 18cm in length off the snow creating a ride similar to a reverse camber but with the benefits of a camber board.
After a long day on the hill, down at the pub the most common conversations are: “Did you see that guy killing the park?”, “You should of seen the airtime I caught off that wind lip” and “How many bangers did you film Today?”. So we decided to have a laugh and imagine what would be going through their heads, while listening to all this snowboard slang.
Don’t be afraid to downsize on this zero camber park board for a more skate style ride.
PARK
ALL MOUNTAIN
POWDER
SINTERED 7500
URBAN RIDERS PARK DWELLERS
LEO CRAWFORD TECH SAVVY RIDERS
INSERT RETENTION PLATES
FACTORY TUNED
TWIN SHAPE
BIAX 2FIBERGLASS
STITCHED SIDEWALLS
RUBBER SIDEWALL INLAYSCUSHIONING FOR THE BANGS AND BUMPS
The rubber sidewall inlay absorbs pressure on impact and minimalizes sidewall damage as well as dampening vibration on hard snow easing leg fatigue.
CARBON FIBRE BEAMSMEMORY STRIPS THAT INCREASE YOUR POP
Strategically placed carbon stiffens the board without adding weight and increases the response by adding flex memory and pop.
NEW STANDARD
http://www.evergreendesignhouse.com
NOSE TAIL
ZERO CAMBERDOWTECH2
DOWTECH2
SOFT FLEX STIFF FLEX
This completely redesigned Color is the Endeavor team’s favorite jibbing board. The deep side cuts and reverse camber make this board soft enough to jib, yet poppy enough to hit park booters. The Color it is extremely maneuverable and is as rider friendly as they come.
COLOR
155cm
144cm 148cm 152cm
155cm 157cm 159cm
COLOR
BOARD DESIGNTECH BRIEFINGENGINEERING INSIGHTS
ARTIST STATEMENT WHO RIDES IT?
REVERSECAMBER
The Reverse Camber is a subtle 3mm concave or arching profile that curves upward. This reduces the pressure on the contact points of the board and makes it feel both looser and more fun to ride.
This series of paintings were made especially for Endeavor and are created to represent the warrior spirit of snowboarders. Each character has it’s own personality and own way of defending itself.
This board excels at jibbing but that doesn’t mean it that it’s strictly a rail board, its even fun in pow.
PARK
ALL MOUNTAIN
POWDER
EXTRUDED 1320
HIT RUNS URBAN RIDERS
LEO CRAWFORD PARK RATS
INSERT RETENTION PLATES
FACTORY TUNED
TWIN SHAPE
BIAX 2FIBERGLASS
STITCHED SIDEWALLS
RUBBER SIDEWALL INLAYSCUSHIONING FOR THE BANGS AND BUMPS
The rubber sidewall inlay absorbs pressure on impact and minimalizes sidewall damage as well as dampening vibration on hard snow easing leg fatigue.
STANDARD CORETRIED AND TRUE
CARBON FIBRE BEAMSMEMORY STRIPS THAT INCREASE YOUR POP
Precision machined from poplar wood, the Standard Core is lightweight and extremely durable.
Strategically placed carbon stiffens the board without adding weight and increases the response by adding flex memory and pop.
COLOR
http://www.funskull.com
NOSE TAIL
REVERSE CAMBER FLATFLAT
SOFT FLEX STIFF FLEX
The Guerilla is the perfect board for the rider who wants the ultimate freestyle board at a price that won’t kill the bank. Take the Guerilla in the park, take it on the groomers, take it in the trees or take it in the pow. The forgiving flex, smooth blend zones and moustache style camber profile makes it one of the most versatile boards in the Endeavor line.
GUERILLA
157cm
149cm 151cm 153cm 154cmWIDE
155cm
156cm WIDE
157cm 159cm 158cmWIDE
160cmWIDE
GUERILLA
BOARD DESIGNTECH BRIEFINGENGINEERING INSIGHTS
ARTIST STATEMENT WHO RIDES IT?
MULTI CAMBER This board has traditional camber between the bindings for pop and a 3mm rise of reverse camber out to the contact points for a fun, float in soft snow and a hook-free ride.
To achieve what I wanted I have combined various techniques and styles, including digitally enhanced pencil or pen drawings, watercolors, inks and acrylics, along with vector graphics, marker and spray made typography. All together creating a mixture of comic, pop-art, Albrecht Dürer and Alfons Mucha like artworks and tattoo, cartoons and Manga inspired frames, giving each board a highly eye-catching visuals.
One of the few boards available in this price range with a full-length poplar core, DDP (Digital Direct Printed) topsheet and UV high gloss lacquer. That’s a deal!
ALL MOUNTAIN
PARK
POWDER
EXTRUDED 1320
MOUNTAIN RIPPERS POW IS MY BUSINESS
PARK LAPPERS TECH SAVVY RIDERS
INSERT RETENTION PLATES
FACTORY TUNED
TWIN SHAPE
MULTI VIBRATION DAMPENING
STITCHED SIDEWALLS
EXTRUDED 1320 BASEMAINTAINENCE FREE
This base material prints up well, comes with a fast factory wax, is low maintenance and easy to repair, if damaged.
STANDARD CORETRIED AND TRUE
BIAX FIBREGLASSTORSIONALLY FORGIVING
Precision machined from poplar wood, the Standard Core is lightweight and extremely durable.
Lightweight and durable with forgiving torsion, this is ideal for beginners, jibbers and park riders wanting a mellow flex.
GUERILLA
http://cargocollective.com/gabz
NOSE TAIL
CAMBER REVERSECAMBER
REVERSECAMBER
SOFT FLEX STIFF FLEX
This true twin, reverse camber board has become the Endeavor team’s board of choice for street riding and park jibbing. This board is the perfect deck for the rider who wants a super fun, playful board that can be ridden all over the mountain.
VICE
149cm 152cm
144cm 147cm
155cm 158cm
VICE
BOARD DESIGNTECH BRIEFINGENGINEERING INSIGHTS
ARTIST STATEMENT WHO RIDES IT?
REVERSECAMBER
The Reverse Camber is a subtle 3mm concave or arching profile that curves upward. This reduces the pressure on the contact points of the board and makes it feel both looser and more fun to ride.
The main concept was to exemplify five different styles of parties within different layers of people depicting a range from “cheap beer parties”, where people get wasted, to high end luxury cognac events. A large part of Russian street culture involves violence, weapons, and criminal activities which also encompass and relate to the idea of “Vice”.
This board is as comfortable in the urban environment as it is burning park laps or riding the entire mountain.
PARK
ALL MOUNTAIN
POWDER
EXTRUDED 1320
LAP BURNERS PARK DWELLERS
URBAN RIDERS STREET KINGS
INSERT RETENTION PLATES
FACTORY TUNED
TWIN SHAPE
MULTI VIBRATION DAMPENING
STITCHED SIDEWALLS
STANDARD CORETRIED AND TRUE
THERMO GLASSGRAPHICS WITH POP
BIAX FIBREGLASSTORSIONALLY FORGIVING
Precision machined from poplar wood, the Standard Core is lightweight and extremely durable.
Using a water-soluble dye and a sublimation graphic process that is also more environmentally friendly than traditional screen-printing creates superior color.
Lightweight and durable with forgiving torsion, this is ideal for beginners, jibbers and park riders wanting a mellow flex.
VICE
http://www.behance.net/Ripper
NOSE TAIL
REVERSE CAMBER FLATFLAT
SOFT FLEX STIFF FLEX
WOMENS & YOUTH
The Diamond is a zero camber, true twin, featuring Dow-Tech at the contact points. Dow tech eliminates edge hook and creates a much more loose and fun ride. Carbon V’s in the nose and tail allow the board to twist while generating an intense amount of stored energy and pop. This board is waiting to be unleashed on park jumps, backcountry booters, freestyle or all mountain. The Diamond doesn’t discriminate, it destroys.
DIAMOND
149cm 152cm 143cm 146cm
DIAMOND
BOARD DESIGNTECH BRIEFING
RUBBER SIDEWALL INLAYSCUSHIONING FOR THE BANGS AND BUMPS
CARBON FIBRE BEAMSMEMORY STRIPS THAT INCREASE YOUR POP
ENGINEERING INSIGHTS
ARTIST STATEMENT WHO RIDES IT?
ZERO CAMBERW/ DOW-TECH
With no pressure on the contact points due to the raised wings, this board feels loose and catch-free like a reverse camber board, however it remains more stable and predictable like a regular camber board.
The rubber sidewall inlay absorbs pressure on impact and minimalizes sidewall damage as well as dampening vibration on hard snow easing leg fatigue.
Strategically placed carbon stiffens the board without adding weight and increases the response by adding flex memory and pop.
The initial inspiration for this graphic was floral patterns from high fashion photography which grew into hundreds of layers of composited photos, paired with hand painted lettering. Refined and vibrant with a little attitude.
Ladies can have their own tech laden all mountain board too. The diamond is a zero camber board that won’t hook up thanks to the Dowtech raised contact points.
ALL MOUNTAIN
PARK
POWDER
PARK BURNERS FEMALE ALL MOUNTAIN RIDERS
TECH SAVVY RIDERS POW IS MY BUSINESS
STANDARD CORE
TWIN SHAPE
FACTORY TUNEDBIAX 2FIBERGLASS
STITCHED SIDEWALLS
EXTRUDED 4400
DIAMOND
DOW-TECHRAISED CONTACTS
DowTech raises the contact points 2mm off the snow creating a ride similar to a reverse camber without loosing the benefits of a camber board.
http://hovercraftstudio.com
NOSE TAIL
ZERO CAMBERDOWTECH
DOWTECH
SOFT FLEX STIFF FLEX
This women’s specific twin is a no nonsense, take no prisoners park dominator. The deep side cut makes it maneuverable. The low profile tips and soft flex make it forgiving. The smooth blend zones and moustache style camber profile combined with carbon makes it pop.
BOYFRIEND
148cm 151cm 142cm 145cm
BOYFRIEND
BOARD DESIGNTECH BRIEFINGENGINEERING INSIGHTS
ARTIST STATEMENT WHO RIDES IT?
MULTI CAMBER This board has traditional camber between the bindings for pop and a 3mm rise of reverse camber out to the contact points for a fun, float in soft snow and a hook-free ride.
El Grand Chamaco “boyfriend” collection for Endeavor shows four 3D artwork inspired by geometric shapes, symmetries and vibrant color, creating a different world for each one of the snowboard.
Skulls, knives, hands, guns, dragons, birds, robots, all those elements are used to communicate the encourage and versatility of the customer in a disrespectful way.
The same freestyle board as your boyfriend’s ride, but tailored specifically for women’s lighter weight and boot size.
PARK
ALL MOUNTAIN
POWDER
EXTRUDED 1320
PARK GIRLS GILLIAN ANDREWSHENKO
URBAN RIDERS PARK LAPPERS
INSERT RETENTION PLATES
FACTORY TUNED
TWIN SHAPE
BIAX FIBERGLASS
STITCHED SIDEWALLS
STANDARD CORETRIED AND TRUE
Precision machined from poplar wood, the Standard Core is lightweight and extremely durable.
RUBBER SIDEWALL INLAYSCUSHIONING FOR THE BANGS AND BUMPS
The rubber sidewall inlay absorbs pressure on impact and minimalizes sidewall damage as well as dampening vibration on hard snow easing leg fatigue.
CARBON FIBRE BEAMSMEMORY STRIPS THAT INCREASE YOUR POP
Strategically placed carbon stiffens the board without adding weight and increases the response by adding flex memory and pop.
BOYFRIEND
http://www.grandchamaco.com
NOSE TAIL
CAMBER REVERSECAMBER
REVERSECAMBER
SOFT FLEX STIFF FLEX
The Shorty has a full perimeter beveled base, designed to make it more difficult to catch an edge, when turning or hitting boxes and rails. The biax glass, mellow torsional flex and zero camber make this board forgiving as possible, yet gives the rider all the tools they need to advance their level of riding.
SHORTY
120cm 130cm 100cm 110cm
SHORTY
BOARD DESIGNTECH BRIEFINGENGINEERING INSIGHTS
ARTIST STATEMENT WHO RIDES IT?
CONVEX BASE Ideal for groms who are more likely to catch an edge and those wanting to ride fun boxes and rails, the convex base geometry raises the steel edge around the entire perimeter of the board for a catch-free ride.
These designs were inspired by a wild and crazy side of my imagination, where these objects and things live. I used lots of bright colors to complete the fantasy dream!
This board will take any grom from learning how to stand on a board to learning how to do jumps and ride park.
ALL MOUNTAIN
PARK
POWDER
EXTRUDED 1320
FUTURE PROS GREEN GROOMERS
GROMS LEARNING TO RIDE
INSERT RETENTION PLATES
FACTORY TUNED
TWIN SHAPE
MULTI VIBRATION DAMPENING
STITCHED SIDEWALLS
STANDARD CORETRIED AND TRUE
THERMO GLASSGRAPHICS WITH POP
BIAX FIBREGLASSTORSIONALLY FORGIVING
Precision machined from poplar wood, the Standard Core is lightweight and extremely durable.
Using a water-soluble dye and a sublimation graphic process that is also more environmentally friendly than traditional screen-printing creates superior color.
Lightweight and durable with forgiving torsion, this is ideal for beginners, jibbers and park riders wanting a mellow flex.
SHORTY
http://www.raulurias.com
NOSE TAIL
CONVEX BASE
SOFT FLEX STIFF FLEX
Endeavor’s design studio closes on a pow day with board meetings happening in a gondola. Endeavor’s crew don’t go to work, they live for snowboarding, they live to create better boards for more fun on the mountain. Support the independents so they don’t have to get a real job.
Office Boys.
Curated specifically for each series, the artwork on Endeavor boards isn’t just graphic design - it is fine art. Endeavor pioneered the artist collaboration eleven years ago and continues it’s dedication to searching out the freshest artwork.
Endeavor is proud to introduce the 2013 line up of artists:
Raul UriasEl Grande ChamaroHovercraftMeggsKonstantin ShalevGabzRory DoyleEd BurdickNumskull
Artists Wanted.
The team of riders that endorse Endeavor boards rigourously test the boards to their limits to ensure design integrity. Street, backcountry, and resort riding are the proving grounds. These riders depend on their boards to perform and depend on Endeavor to produce the highest quality products.
The Endeavor Snowboards team is:
Kareem El RafiePetter KristiansenLeo CrawfordRisto RuokolaAndy NuddsFlo CorzeliusGillian Andrewshenko
With Ambassadors:
Kale StephensShin CamposJohnny LyallChris Dufficy
Rider Inspired.
Much love to the extended family:
Katy Gilbertson, Daryl Trinidad, Dez Price, Dickson Li, Mike West, Natasha Wells, Cherie Broz, Auley Serfas, Sue Wells, Ryan Patey, Murray Fraser, Matty, Sam Noble, Miles Parry-Jones, Rory Doyle, Klump, Whistler- Blackcomb, Cypress, Grouse, Mt Seymour, all of our
distributors, dealers, their crews and everyone supporting the independents.
Always Endeavor.
Catalogue Layout & Design: Max Jenke, Ed Burdick, Rob DowPhotography: Scott Serfas, Oli Gagnon, Daniel O’Toole
Printed in Hong Kong. Copyright 2013 Endeavor Snowboards Inc. All Rights Reserved.
Endeavor Snowboards Inc.439 Railway StreetVancouver, British Columbia, CanadaV6A 1A7
W. www.endeavorsnowboards.com