Date post: | 24-Mar-2016 |
Category: |
Documents |
Upload: | danny-boatswain |
View: | 282 times |
Download: | 15 times |
Max LightLess than 2kgs!
Max Quiet97.3 dBA
aust
rali
a’s
mo
st p
ow
erfu
l im
pact
wre
nch
in it
s cl
ass
NEW
Twin
Hammer
next generation air toolsThe Black Rattler
24 MONTH WARRANTY
Made In Japan TM
MetricHEX: 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10MM
$29.95ETHEX-10-MET
NEW
TORX: T10, T15, T20, T25, T27, T30, T40, T45, T50
$29.95ETTORX-10
NEW
ImperialHEX: 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8"
$29.95ETHEX-10-IMP
NEW
TM
MADE IN DENMARK
• Ideal for general use and keeping work areas clean & tidy.• Max Working Pressure: 232 PSI (16 bar).
8mm Bent PipeBlow Gun
$15.95124140101
$39.95PT-200
• Up to 50% more force in twisting applications. • Cushion grip reduces slippage.• Thumb release provides for easy one handed use.
Opening: 0-40mm (0 - 1-5/8”)Length: 180mmWeight: 375g
Pric
es V
alid
: 01/
02/1
2 til
l 27/
04/1
2. ©
2011
End
eavo
ur T
ools
$49.95727-08
Made in Spain
Extra Long Hex | Torx Key Sets
With Magnetiser (10 pce)
Ergo GripErgo Grip Locking Plier
Up to 50%
moretorque
Up to 50%
more
torque
Anti SlipAnti Slip
Gas Torch• Auto ignition and safety switch.• Up to 60 minutes of use (20 ml tank).
Torch Temp: 1300ºC
Butane Heat Tools
1 FEBRUARY - 27 APRIL 2012All Prices Include GST
Splash
NEW
1,200 ft lbs / 1,627NmBreakaway Torque
Max Power
$395.00RMAX1200
NEW
1/2” Drv Hub Nut Removal Set (6pce)
Impact Wrenches
Air Die Grinders
Air Chisel
2 Another Quality Range From Endeavour Tools
• Free Speed: 25,000 rpm• Weight: 0.60 Kg• Length: 165mm• Avg Air Cons: 2.7CFM
• All popular sizes: 17, 19, 21, 22, 27mm
Industrial GradeJapanese QualitySuperior Performance
12 Month parts & labour warrantyon all Endeavour Air Tools
$178.95E2001S
• Free Speed: 25,000 rpm• Weight: 0.37 Kg• Length: 165 mm• Avg Air Cons: 4.0 CFM
$178.95E2011S
$189.00E4120
Breakaway Torque: 500 ft. lbs / 678 Nm• Working Torque: 25-350 ft. lbs / 34-475 Nm• Weight: 2.4 lbs / 1.09 kg• Avg Air Consumption: 4.5 cfm• Sound Level: 93.5 dBA• Overall Length: 5-3/4”• Air Inlet: 1/4”• Recommended Hose Size: 3/8”
Breakaway Torque: 1,200 ft. lbs / 1,627 Nm• Working Torque: 50-800 ft. lbs / 68-1,085 Nm• Weight: 4 lbs / 1.8 kg• Avg Air Consumption: 4.9 cfm• Sound Level: 97.3 dBA• Overall Length: 6-7/8”• Air Inlet: 1/4”• Recommended Hose Size: 3/8”
$79.00ET1031
NEW
$395.00RMAX1200
NEW
$359.00RMAX500
NEW
1/4”COLLET
1/4”COLLET
Small
Medium
Easily remove damaged hub nuts
1/2”
3/8”
NEW
• Chisel Shank: 10.2mm dia• Blows/Min: 2,600• Stroke Length: 10mm• Avg Air Cons: 3.0 CFM
Air Chisel Hammer
composite
next generation air tools
The Black
Rattler
24 MONTH WARRANTY
$419.00RMAX1200-EXT
NEW
2” Extended Anvil
New cutting edge technology from Endeavour delivers class leading power in a super lightweight, low noisetool.
Patened trigger design allows one handed operation. Variable speed trigger delivers accurate use. All backedby a comprehensive 24 month warranty.
1/2” Drive (5 pce) Chrome Moly | Impact
1/2” Drive (3 pce)Chrome Moly | Impact
Ratchet Wrenches
Impact Grade Quick Release Adaptors
• Max Torque: 22 ft.lbs / 30 Nm• Avg Air Cons: 1.8 CFM• Overall Length: 125mm
3Prices Valid: 01/02/12 till 27/04/12
Air Saw
Wheel Nut Sockets
• Capacity: 3mm mild steel• Stroke/Min: 10,000• Stroke Length: 10mm
• Max Torque: 22 ft.lbs / 30 Nm• Avg Air Cons: 1.8 CFM• Overall Length: 125mm
WOBBLE
• 17mm • 19mm • 21mm • 22mm • 27mm
• 17mm • 19mm • 21mm
Breakaway Torque: 1,800 ft. lbs / 2,440 Nm• Working Torque: 100-1,000 ft. lbs / 13-1,356 Nm• Weight: 6.85 lbs / 3.1 kg• Avg Air Consumption: 6.9 cfm• Sound Level: 97.3 dBA• Overall Length: 8”• Air Inlet: 3/8”• Recommended Hose Size: 1/2”
BONUSAir Saw Blades
BONUS1/4” HEX Quick
Release
Adaptor
BONUS10mm HEX Quick
Release
Adaptor
$295.00E4700BP
BONUS
$199.00E1107BP
BONUS
$199.00E1108BP
BONUS
$799.00RMAX1800
NEW
1/4”SQ DRV
3/8”SQ DRV
3/8”SQ DRV
10mm
1/4”SQ DRV
1/4”
3/8”SQ DRV
1/4”
3/4”
$19.95ET3M10
$19.95ET3S08
$64.95ETK5
$39.95ETK3
$19.95ET2S08
NEW
24 MONTH WARRANTY
aust
rali
a’s
mo
st p
ow
erfu
l im
pac
t w
ren
ch
in
its
cla
ss
6” Extended Anvil
$819.00RMAX1800-EXT
NEW
Aluminium ratchet handle with double �exible joints. Includes 19 popular bits & 1/4” square drive adaptor
Analogue Torque Wrenches• Premium quality (ISO 6789 compliant)• Calibration certificate included (+/- 3% accuracy)• Easy to use with pull-push torque setting mechanism• Easy to read window scale
Aluminium Ratcheting Bit Holder & Bit Set
Composite sharks teeth spanner rack with magnetic strips. Two piece 385mmand 425mm lengths, holdsup to 20 spanners.
Magnetic Sharks Teeth Spanner Rack (2pce)
4 Another Quality Range From Endeavour Tools
Great for tool boxes, car boots, boats, home & factory.
• Overall length: 940mm• Tang thru• Square shank
Non-Slip Mats
Jumbo Pry Bar
Size: 45 x 195mm Size: 60 x 195mm
• Chrome Vanadium shaft.• Replacement heads available.
Ratcheting Breaker Bars
• Drop forged steel • Heat treated blades• High impact handles
4pce Pry Bar Set
600mm450mm
300mm
200mm
The Torque Specialists
Convert your ratchet wrench into a socket driver / bit holder
1/4” Square Drive10mm Wrench
3/8” Square Drive17mm Wrench
1/2” Square Drive19mm Wrench
1/4” Bit Holder10mm Wrench
10mm Bit Holder10mm Wrench
Bit HoldersSocket Drivers
• Magnetic spanner rack with protective foam backing, ideal for tool chests or any ferrous surface.• Holds up to 12 spanners for easy size identification.• Can also be wall mounted.
Quality Tools - Designed to Last - Made In Taiwan
te
3/8”Torque Range:20-110 Nm (15-81 ft.lbs)OL: 403mm
BONUS3/8” Breaker
Bar
1/2”Torque Range:30-210 Nm (22-155 ft.lbs)OL: 490mm
BONUS1/2” Breaker
Bar
3/4”Torque Range:140-700 Nm (50-500 ft.lbs)OL: 1032mm
BONUS3/4” Breaker
Bar
1/2”Torque Range:50-350 Nm (37-258 ft.lbs)OL: 625mm
BONUS1/2” Breaker
Bar $499.00ARD500BB
$189.00ARD250BB
$159.00ARD150BB
$149.00ARD080BB
3/8” SQ DRV
600mmOL
450mmOL
1/2” SQ DRV
MAGNETIC
MAGNETIC
Magnetic Spanner Rack
$13.95DA0045
$18.95DA0060
$34.95AL-BTH21
$27.95DA1237
$55.95ET1206
$49.95ET1205
$19.95ETWR03
NEW
$19.95RA-5
$17.95ETWR02
NEW$48.95
DA1225NEW
Flexible
-SN LIO PN
Ratchet Wrench Sets
XL Flat Ratchet Wrenches
Quality Tools - Designed to Last - Made In Taiwan
Quality Tools - Designed to Last - Made In Taiwan
Metric (12 pce)8, 9, 10, 11, 12, 13, 14,
15, 16, 17, 18, 19mm
Imperial (7 pce)5/16, 3/8, 7/16, 1/2
9/16, 5/8, 3/4”
Metric (7 pce)8, 10, 12, 13, 14
17, 19mm
Metric (7 pce)8, 10, 12, 13, 14
17, 19mm5/16, 3/8, 7/16, 1/2
9/16, 5/8, 3/4”
Imperial (7 pce)8, 9, 10, 11, 12, 13, 14,
15, 16, 17, 18, 19mm
Metric (12 pce)
Chrome Vanadium mirror polished finish. Extra long length to reach into narrow and deep spaces.
ALL KABO WRENCHES FEATURE SPHERICAL DRIVE & LIFETIME WARRANTY
6-Point 6-Point 50%rounded o� Star Square Spline12-Point
Packaged inEVA Trays
5Prices Valid: 01/02/12 till 27/04/12
Wrench Sizes:8 x 10mm12 x 14mm13 x 15mm16 x 18mm17 x 19mm
XLB5-MET
Overall Length:250mm330mm330mm375mm405mm
5pcs Metric Set
XLB4-IMP
Wrench Sizes:5/16” x 3/8”7/16” x 1/2”9/16” x 5/8”11/16” x 3/4”
Overall Length:215mm285mm350mm405mm
4pcs Imperial Set
Reversible 15º O�set
Wrench Sizes:21 x 22mm24 x 27mm
Overall Length:425mm465mm
XLB2-MET
2pcs Metric Set
5/16, 3/8, 7/16, 1/29/16,5/8, 3/4”
Imperial (7 pce)8, 10, 12, 13, 14
17,19mm
Metric (7 pce)8, 9, 10, 11, 12, 13, 14,
15, 16, 17, 18, 19mm
Metric (12 pce)
Stubby
$139.95PFFK7-MET
BONUS
$189.95
$149.95
$89.95
$199.95PFFK12-MET
BONUS$139.95PFFK7-IMP
BONUS
Combination
-SN LIO PN
Metric (12 pce)8, 9, 10, 11, 12, 13, 14,
15, 16, 17, 18, 19mm
$169.95PFZK-12VP
BONUS
$119.95PFG7-MET
BONUS $189.95PFG12-MET
BONUS$119.95PFG7-IMP
BONUS
$99.95PFT7-MET
BONUS $169.95PFT12-MET
BONUS$99.95PFT7-IMP
BONUS
BONUSWR02
BONUSWR02
BONUSWR02
BONUSWR02
FlatExtra LongSpherical Drive EVA Packaging
• Jaw openings 5-7mm & 6-9mm• Hardened shafts
Clip Removal Tool Set
• Strikes blow when pressure applied• Cap adjusts force of blow• Extra hard steel tip - replacement tips available
Auto Centre Punch
• Premium Quality - Made In Japan• Famous for its comfortable handle • For Industrial, Automotive & Professional Use
• Hardened 350mm long square steel blade• Tang thru design (can be struck with hammer to loosen screws)• 9.5mm wide slotted tip
Extra Long “Tang Thru” Driver
• Ideal for pulling out vehicle hoses.• Blade is made of a hardened steel.• Comfortable cushion grip.• O.L.: 215mm
Hose Remover
Scraper Set (2 Pce)• Ideal for scraping dried paint, rubbing o� rust or carving aerated concrete• Tang thru type can be used with hammer• Durable for heavy impact work• Scraper width: 16mm & 21mm
6 Another Quality Range From Endeavour Tools
Torx® Security Screwdriver Sets (6 pce)High quality steel shank with hardened tip. Screwdrivers drive both standard & security Torx® screws
Sizes: T10H, T15H, T20H, T25H, T27H, T30H
Extra Long Length (250mm Blade)
Regular Length (150mm blade)Sizes: T10H, T15H, T20H, T25H, T27H, T30H
Now in EVA Trays
• Phillips: #1 X 75mm, #2 X 150mm, #3 X 150mm • Slotted: 5.5 X 75mm, 6.0 X 100mm, 8.0 X 150mm
Magnetised & Tang-Thru Screwdriver Set (6 pce)
Quality Plastic Casewith EVA Insert
BONUS98
The Screwdriver Specialists
$26.95380385
$24.95H-611
$25.95CT-610
$44.95185
$24.95215-9-5X350
$68.95888-6V98PC
BONUS
$94.95222-C-TH/6KLNG
$74.95222-C-TH/6K
Screwdriver set with double ended interchangeable 300mm blades. One end Torx® (Sec) (6 sided), other end Torx Plus® (Sec) (5 sided). Sizes T10 | T15 | T20 | T27 | T30 | T40
Ribe (32 Pce)
• 9 x 55mm (M5 to M14)• 9 x 100mm (M5 to M14) • 7 x 140mm (M8 to M14) • 7 x 200mm (M8 to M14).
Torx® Plus Tamperproof Bit Sockets• 1/4” Drive Bit Sockets TS8H, TS15H, TS20H, TS25H, TS27H, TS30H. • 3/8” Drive Bit Sockets TS40H, TS45H, TS50H, TS55H.
S2 Steel quality!
S2 Steel Mechanic’s Bit Set (40 pce)Includes popular sizes of Torx, Spline and Hex bits, plus 10mm Hex bit holders in 3/8” and 1/2" drive.
Hex Spline Torx®
8 x 55mm : M5, M6, M8, M9, M10, M12, M14, M167 x 100mm : M5, M6, M8, M9, M10, M12, M147 x 140mm : M5, M6, M8, M9, M10, M12, M144 x 200mm : M8, M10, M12, M14
9 x 55mm : 5, 6, 7, 8, 10, 12, 14, 17, 19 mm | 8 x 100mm : 5, 6, 7, 8, 10, 11, 12, 13 mm |7 x 140mm : 5, 6, 7, 8, 10, 12, 14 mm | 6 x 200mm: 5, 6, 7, 8, 10, 12 mm
Spline (26 pce)
Hexagon (30 pce)
7Prices Valid: 01/02/12 till 27/04/12
Torx® (Sec)/ Torx Plus® (Sec) Drivers (7 pce)
• Ball Type Universal Joint 35-3118• 3/8”F x 1/4”M Adaptor 35-3119• 3/8”F x 1/2”M Adaptor 35-3120
3pce Adaptors & Universal Joint Set
• Ball Type Universal Joint 45-4118• 1/2”F x 3/8”M Adaptor 45-4119• 1/2”F x 3/4”M Adaptor 45-4120
3pce Adaptors & Universal Joint Set
A2 Steel / Magnetised 10 PacksBITS Bonanza
50mm Power Bits50PH1A10PK Phillips #1 9 .95
10 Pack
50PH2A10PK Phillips #2 9 .95
10 Pack
9 .9510 Pack
50PH2ADE10PKPhillips #2 D/E
50PZ2A10PKPozidrive #2 9 .95
10 Pack
50PZ1A10PKPozidrive #1 9 .95
10 Pack
50H5A10PKHex 5mm 9 .95
10 Pack
9 .9510 Pack
50RS2A10PKSquare #2
300mm long300mm long
Bit Socket Sets (1/2” Drv)
• Ball Type Universal Joint 25-2118• 1/4”F x 3/8”M Adaptor 25-2119• Hex Insert Bit Holder 25-2131
3pce Adaptor, Universal Joint and Bit Holder Set
1/4”SQ DRV
3/8”SQ DRV
1/2”SQ DRV
$59.95ET9342
NEW
$134.95ET2106
$124.95ET2104
$124.95ET2103
$29.9535-3PCSET
$39.9545-3PCSET
$64.95ET1319
$26.9525-3PCSET
$32.9511PC-25B
8 Another Quality Range From Endeavour Tools
$63.95124145100
• Cleans places which are difficult to access• Max Working Pressure: 232 PSI (16 bar)
• Special hardened nozzle.• Removes corrosion, old paint, dirt, etc.• Adjustable nozzle regulates quantity of sand.
Air Sand Blasting Gun
Flat Nozzle• Flat nozzle generates a quiet, efficient, regulated distribution of compressed air• Designed for drying, cleaning and cooling purposes
• Safety nozzle & noise suppressor meet OH & S requirements for safe & reliable use• Noise level 76db at 6 bar inlet pressure• Non block tip prevents “Dead Hand”• Max Working Pressure: 232 PSI (16 bar)
Safety
$29.95 $34.95 $43.95 $149.95 $169.95124140112 124140113 124140114 124140183 124140184
DURABLE & STRONGMade from acetal plastic that’s harder than brass
LEAK FREE VALVE SYSTEMGuaranteed even after 10 million operations
PRECISE AIR FLOWInfinitely adjustable trigger system
TM
MADE IN DENMARK
Blow Guns
Extra Long Air Blow Guns
Cleaning GUNS
300mm 500mm 1m 1.5m 2m
316 Stainless Pipe
Endeavour Filter Regulators
Maximum airflow: 2,200 l / min
Maximum airflow: 3,000 l / min
• Maximum input pressure: 215 PSI• Maximum output pressure: 150 PSI• Bowl capacity: 55ml
1/4” BSP
1/4” BSP
3/8” BSP
50 Series Mini SeriesMaximum airflow: 1,100 l / min
• Maximum input pressure: 280 PSI• Maximum output pressure: 227 PSI• Bowl capacity: 15ml
• Adjustable nozzle regulates the amount of cleaning agent applied. • Thermoplastic tank is resistant to most chemicals (except solvent based).
260mm Metal Pipe Engine Cleaning Gun
• Fitted with a standard 13mm water coupling• Produces no splash-back, preventing the user from getting wet• Trigger easily regulates pressure• Uses 4 - 8 litres of water per minute
Air & Water
$59.95124142100
$25.95124140125
$39.95124142180
$29.95124140026
$74.95EFR502A
$77.95EFR503A
$54.95EFR212A
9Prices Valid: 01/02/12 till 27/04/12
Oil & Coolant Oil Filter Wrenches
Sizes:• Hex: 8, 9, 10, 12, 14, 17mm• Square: 7, 8, 10, 11, 12, 13, 14mm• Square: 5/16”, 3/8” • 10mm Square (Female)• M16 Spline Security• Triangular (10mm)
Oil Drain Plug Key Set (18 Pce)
• Use either hand pump, or airline to extract fluid.• Avoids the need to remove the drain plug.• 10L capacity.
• 4 suction tubes included - 7mm steel oil - 6mm oil - Brake fluid connector - 10mm gear oil
Air / Manual Oil Extractor• New cup style avoids damage to filter housing. • Suits most popular vehicles, including Toyota.• 3/8” Drive
Cup Style Oil FilterWrench Set (9 pce)
$149.95ET9024
Nylon Strap Oil Filter WrenchSturdy non-slip nylon strap. Handles spin-type filters up to 6” (150mm) diameter. For use with 1/2” drive tools.
BMW Cooler Line PliersEasily release hydraulic cooling lines on most BMW E & R series engines.
Oil Pan Separator ToolWide, tapered, round blade edges between metal surfaces to break gasket seals on engine pumps, transmissions or any difficult to separate gasket joints.Blade width: 42mmLength: 70mm
Oil Drain Plug Thread Repair KitIncludes:• Tap. • Screws (x6). • Washers (x12).
Suits Toyota & Lexus
$26.95ET1130
$38.95ET1243
Suits BMW /Volvo models
Suits GM 2.2L Ecotech &Mercedes HGVs
Suits Mercedes, BMW, Ford 6L Diesel
Suits Mercedes
$26.95ET1131
Suits Mercedes, Mazda 3 & others
Suits genuineToyota D2 oil filter
M13 x 1.25P M15 x 1.25P M17 x 1.25P
$12.95DA6686
$26.95ET2220E
$26.95ET2220D
$247.95ET3586
$29.95ET8011-01
$30.95ET8011-03
NEW $33.95ET8011-06
NEW
$26.95ET1370
NEW
$26.95ET9001
NEW
Quality Alloy Steel!Quality Alloy Steel!
73MM
14FLUTES
64.5MM
14PT
74MM
14FLUTES
86MM
32MM
36MM
16FLUTES
84MM
14FLUTES
$98.95ET1356
$74.95ET1236
BONUS
$29.95ET2114
BONUSWR02
ItemsPrices
hot
10
Wire Piercing Guide Clip
$5.95ET3005
NEW
High Tension System Testers
Electrical
EFI Test Light Kit
Solderpro 70 Kit
Car / Truck Tyre Pressure Gauge
Reads up to150 PSI
Solar powered
Solderpro 150 Kit
Flameless Heat Shrink Gun
Universal Line Kit
Contains a 70W butanepowered iron, 4 extra tips
and more. A well priced tool for the trade user. 4-in-1
functionality and a 20ml tank.
• Includes a �bre-optic extension for viewing from driver’s seat.• Seven noid lights for testing GM, PFI, FORD TBI, GEO TBI, BOSCH PFI, GM TBI, GM SCPI, GM MULTEC 2. • Two IAC signal test lights.
• Measures up to 150 PSI (ideal for trucks).• 4 unit conversion (PSI / Bar / KPa / Kg /cm).• With LED light, and dual solar panel / lithium battery.
Top of the rangebutane iron with auto
ignition with 2 removable and refillable LEC (liquid
energy cells). Includessolder and more.
Auto ignition with safety locking switch.Powered by Iroda RC-30 re�llable Fuel Cell or
readily available disposable lighter.Heat temperature
up to 650°C.
The Ultimate Circuit TesterConnect a Power Probe III to the vehicle's battery and you'll have a multitude of testers at your �ngertips...
• Volt Meter: backlit voltmeter reads up to 70V.• Continuity tester: for switches or relays.• Long lead: supplied with a 20ft lead.
® III
Comprehensive kit for quickly & securely connecting into wiring. Over 86 leads.
• 2 way LED testers.• Black / red multimeter connector leads.• Male / female round terminal to banana plug.• Male / female flat blade terminal to banana plug.• Variable resistors with banana terminals.• Needle / piercing probes.• Heavy duty alligator clips.
Terminal Kit with Ratchet Crimper (552 Pce)
Heat Shrink Kit (180 Pce)• Colour coded heat shrink tubes from 2mm to 9mm diameter.• Diameter will reduce by up to 50% when heated to 125°C.
• Ratcheting crimping tool with laminated steel jaws and insulated grips.• 500 assorted terminals, 50 cable ties and insulating tape.
• Clip design protects tools.• Easier to grip than plain wires.• Suits vehicles with Clarion, Sony, Blaupunkt systems.
Folding Radio Removal Kit(2 Pce)
$69.95PRO-70K
BONUS BONUSET1800
Heat Shrink
(180 Pce)
BONUSET3005
Wire Piercing
Guide Clip
BONUSET3005
Wire Piercing
Guide Clip
$69.95ET9894
BONUS
$74.95ET8048
NEW$19.95ET1800
NEW
$94.95ET1117
NEW
$36.95MJ-600
$19.95ET1335
$199.95ETPP319FTC
$239.95ET2031B
BONUS
$149.95PRO-150K
BONUS
$16.95DA1291
42V Circuit TesterFor Hybrids
$25.95ET1330
Computer Safe Circuit Tester (3-15V)
$13.50DA1418
BONUSET1330
Hybrid Tester
11
ItemsPrices
hot
A universal air powered kit toremove the disc calipers on most vehicles.
Air Powered Disc Caliper Wind Back Kit
Wind back disc brake pistons onAudi, Rover, Ford, Peugeot, VW, Nissan &Subaru vehicles
Brake Spreader
Brake & Fluid Hose Clamp
Updated adaptor set for domestic imported vehicles to suit later model cars.
Master Cylinder Pressure Bleeder Adaptor Sets
• Single person operation for quickly / cleanly bleeding brakes.
Air Brake Bleeder
• 0.375L
Air Brake BleederReplenishment Bottle
Hand operated pump generates airpressure inside the tank allowingbrake bleeder to be used away from permanent air connections.3.5 litre capacity
Hand Operated Pressure Style Brake Bleeder
Original universal adaptor set for European / Japanese vehicles.
$13.95DA9031
TM
MADE IN DENMARK
$169.95ET5613
BONUS
Small Brake Spoon (124mm)
Tyre Repair KitFor Steel Belted Radials
$39.95DA3710
Digital Brake Fluid Tester
$49.95ET1333
$39.95DA5556
$119.95ETWH505H
$249.95ETWH500C
$189.95ETWH500CN
$8.95DA5533
Self Gripping Pullers
Capacity: 1.1 tonnesSpread: 80mmReach: 90mm
Capacity: 1.1 tonnesSpread: 150mmReach: 150mm
Capacity: 1.7 tonnesSpread: 200mmReach: 200mm
$89.95ET8076-01
$109.95ET8076-02
$139.95ET8076-03
$34.95124143150
$94.95124143100
BONUSET1333
Brake Fluid Tester
Spring Loaded
Essential Diesel Tools
Mercedes Glow Plug Puller & Reamer Set
Damaged Glow Plug Removal Set (19 Pce)
Extra Long Glow Plug Socket Set (6 Pce)
Glow Plug Connector Pliers
Direct Access
90º Angle
12 Another Quality Range From Endeavour Tools
Diesel Injector Seat Cutter Set• Cleans / recuts injector seats of modern common rail diesel engines. • 4 reamers included 19mm �at (Benz CRD), 17mm �at (BMW, PSA, Renault), 15mm �at (most trucks), 19mm angled (Fiat / Iveco).
• Removes damaged & broken glow plugs from cylinder heads.• Suitable for glow plugs with an M8 x 1.0mm thread.
• Rubber socket insert grips ceramic insulation / helps with extracting plug.• Sizes: 8, 9, 10, 12, 14, 16mm• 3/8” Drv | 150mm long
• Recommended for use when �tting new or re�tting original glow plugs. • Sizes M10 & M12 (2 lengths)• Manufactured from Chrome Moly steel & titanium coated• Suitable for removing engine carbon deposits.
For removing glow plug connectors on late model diesel engines, including Mercedes, VAG, BMW.
21x90mm: Ford Duratorq (Mondeo / Transit) | 22x80mm | 22x110mm | 27x80mm | 28x80mm | 28x83mm VM 2.4D / 2.5D Alfa ,Chrysler, Land Rover, Rover engines.
Suitable for Titania and Zirconia oxygen sensors found on mostmodern vehicles.
Removes the copper injector seal when it is stuckin the head. Adjusts to allow seals with 7.5-10mm internal diameter to be removed.
Injector Seal Removal Tool
Diesel Injector Sockets 1/2" Drv (6 Pcs)
Di�cult to Reach Sensor Sockets (6 Pce)
Common Rail Diesel Injector Flow Test Kit
Oxygen Sensor Socket Master Kit (11 Pce)
Diesel Injection Leak Back Master Kit
• Measures return fuel �ow on diesel vehicles with up to 6 cylinders.• With measurement tubes for short term tests, and bottles for longer / more accurate tests.
• Measures return fuel �ow on diesel vehicles with up to 6 cylinders to identify faulty injectors.• Includes adaptors for Bosch, Delphi, Denso injectors.
$139.95ET2209
• Access difficult pipe connectors and wired sensor units (NOT Lambda).• Ideal for the loosening of ABS pipes, master cylinder pipes, diesel injection pipes and wired sensors.
$189.95ET1472
NEW
$79.95ET1172
NEW$69.95ET1195
NEW
$84.95ET1033
NEW
$239.95ET1383
NEW
$57.95ET1267
NEW
$44.95ET1456
NEW
$44.95ET1457
NEW
$134.95ET1426
NEW
$179.95ET1428
NEW$119.95
ET1392
NEW
NEW
NEW
Transmission Filling System
EngineTools
Optional Adaptors
Water Pump Wrenches
41mm (GM 1.6L)
46mm (GM 1.6, 1.7D, 2.0L)
GM 46844 Air BagRemoval
Tool
Fuel FeedDisconnect Plier
Seal Installation & Removal Kit
Universal Clutch Alignment Kit (17 Pce)
13Prices Valid: 01/02/12 till 27/04/12
Quickly & easily remove camshaft and crankshaft seals in passenger cars, light trucks and sports utility vehicles.
• Holds water pump when replacing the timing belt.
For replacing transmission �uid onmodern vehicles. Adaptors to suitmost vehicles including Ford Falcon.7.5l capacity. Viscosity range up toSAE 140.
16 SAE & metric pilot bearingadapters for aligning the clutch plate for assembly on most cars.
For Mercedes M12 thread (722.9), VAG M22 thread(CVT), VAG M24 thread (DSG).
$24.95ET1310-17
Honda | Toyota Fuel Pipe LineNut Wrenches
3/8” Drv x 14mm(OL 93mm)
1/2” Drv x 17mm(OL 98mm)
Diesel InjectionPriming Tool
Essential for priming fuelsystem after any service
work that disturbs thefuel system to enablethe engine to restart.
• For inline fuel �lterreplacements
• Petrol engines: VAG,GM, Mercedes M-Class
Piston Rings Compressors
3” Height | 60-175mm
2” Height | 40-80mm
3” Height | 53-125mm
Multi Purpose Puller SetFor balancer, pulley, gear &�ywheel. Drop forged 4-slotyoke and a variety of cap boltsand forcing screw tips makethis set universal.
$24.95ET1310-14
NEW
NEW
$15.95DA3020
$18.95DA3021
$21.95DA3022
$32.95ETWH101A
$47.95ET1546
NEW
$49.95ET5094
NEW
$29.95ET1023A
$29.95ET1023B
$229.95ET0960A
$39.95DA4001
$99.95ET4089A
$289.95ET4089
$54.95DA9132
NEW
NEW
Timing Tools
Another Quality Range From Endeavour Tools14
Ecotec (Barina)
Mitsubishi Belt Tensioner Adjuster
GM Cruze (2.0 VDCi)
OEM CodeEN-48245EN-48246
Engine codesZ20DM | Z20DMH \ LLWZ20DMH | RA420 | Z20SI | Z20S3 | Z20S4 | Z20S5
Subaru Camshaft Sprocket Holder Adjustable Camshaft Pulley Holding Tool
Applications OEM CodeKM-953 | KM-952KM-954 | KM-955
• Two cylinder design to fix the tension pulley easily. • For Mitsubishi vehicles with injection engines.
• Universal tool set for fitting stretch belts on a variety of modern vehicles. • Guides belts into place while pulleys are rotated.
• Set of pins suitable for locking back belt tension device while installing or removing cam or auxiliary drive belt.
Agila | Astra G/H | Combo CCorse B/C/D | Meriva ATigra B 1.0 / 1.2 / 1.4 petrol engines Codes X10XE | Z10XE | XEP | Z14XEL | XEP (1993 - 2010)Barina XC Z14XEP
V6 Alloy 3.6L Chain Drive
Grooved pins hold the camshaft pulley stationary while loosening and tightening the center shaft bolt. Applications: Benz, BMW, Ford, Mitsubishi, Honda, VW, Audi, Nissan, Volvo & Toyota.
OEM # 499977500 For 2005 & Newer 2.5L Turbo And 3.6L 6 Cylinder Engines
Ribbed Pulley Remover• Puller grips the grooves on the pulley• Suitable for pulley diameters 130 - 155mm
Belt Tension Locking Pins (6 pce)
Zetec 16V Twin Cam 2.0L
OEM Code
PETROL
ET1464BELTDriven
21-210 | 303-50721-163 | 303-57421-259 | 303-74821-162B | 303-376 303-376B
ApplicationsFiesta | Focus | CougarC Max | Maverick | MondeoPuma | S-Max | Transit ( from 1995 onwards)
Also includes some Volvo 1.8 and 2.0 engines
FORD
Astra 1.6 | 1.8OEM Code
PETROL
ET0471VPBELTDriven
KM-6340KM-6333KM-911
ApplicationsAstra G/H | Corsa D | Insignia | Meriva ASignum | Vectra C | Safira B 1.6 / 1.8 petrol engines | Codes 2HO | A18XEW | LDEA16XER | Z16LEL | LER | XE1 | XEP XER | Z18XER (2003 - 2010)
Applications:
GMPETROL
BELTDriven
CHAINDrivenGM
GM | COMMODORE
$109.95 $49.95
$49.95
ET0530
ET46105
ET1314
GM
GM
CHAINDriven
Universal Stretch Fit Tool (2 Pce)
ET0270
Applications:Laguna 2.2D/TD, Safrane 2.2TD,Espace 2.2TD, Trafic 2.5 2.5D, and Megane 2.5D/TD
RENAULT BELTDriven
CHAINDriven $224.95
CITROËN / PEUGEOT $269.95ET1541
PETROL
BELTDriven
DIESEL
DIESEL
An essential kit for servicing petrol / dieselengines including timing belt replacement.
ET0379
Applications:Audi : A4, A6, A8, AII (97-04)VW : Passat (98-04)
AUDI | VW $249.95PETROL
BELTDriven
DIESELCHAINDriven
PETROL
BELTDriven
CHAINDriven
$74.95NEW
Citroën: AX, BX, ZX, XM, VISA, SAXO, XSARA, XANTIA, Berlingo, Jumpy, C15, C25, Picasso, C5. Peugeot: 106, 205, 305, 306, 307, 309, 405, 406, 605, 607, Expert, Partner, Boxer. Including (Petrol) 1.8 2.0 2.2 16v HPI EW coded engines and (Diesel) 1.9 DW8, 2.0 DW10, 2.2 DW12 HDi 1.9 D.
$99.95NEW ET1161
Applications:Hold camshafts at TDC position when replacing timing belt. Applicable: AUDI A4, A6, A8, S4, ALLROAD (95-04). VW: PASSAT (96-04) with codes: ACK, AGA, AGB, AJG, ALF, ALG, ALW, AML, AMM, APR, APS, APZ, AQD, ARE, ARJ, ASM, BDV, BES. P.C.D.: 622mm
AUDI | VW $74.95V6 Camshaft Setting Plate
A comprehensive kit with tools for 1.3 & 1.9 CDTi, Ecotec 2.0 & 2.2 engines, 1.0 12V & 1.2 16V, 1.4 & 1.6 16V Ecotec.This includes Astra and Barinas.
ET1549 $169.95
$19.95ET1232
$39.95ET2172
$78.00ET1400
NEW
$24.95ET1346
$149.95ET1081
$78.00ET8075
NEW
NEW
Prices Valid: 01/02/12 till 27/04/12 15
Strut Support Clamp
Spotweld Cutter 3/8”
Grip-On Tool Shadow Board (16 Pce)
Tail Pipe Expanders
Vacuum Suction Cup (150mm)
Butt Welding ClampSet (4 Pce)
Filler Application Set (4 Pce) Mini Panel Removal Set (6 Pce)
Internal design operates with simple wrench. Standard equipment for all tail pipe expanding.
• Great for removing small or fine facia trim and bezels from dashboards, air vents door planels, and much more.• Made from impact resistant high quality nylon.
• Pull out panel dents safely & easily. • Also suitable to hold windshields, lift metal / plastic etc. • Simply lift lipped edge to release vacuum.
• Quality alloy steel double ended blade cuts perfect holes in most materials. • 1/4” arbour with retractable pilot assures accurate cuts.
Made from spring steel with plastichandles. 4 piece set of
1”, 2”, 3” & 4”.
Work range: 1-1/8” to 1-3/4” (29-44mm)
Work range: 1-1/2” to 2-1/2” (38-64mm)
Work range: 2-3/8” to 3-1/2” (54-89mm)
131-10-BLOmnium GripSize 300mmCapacity 60mm
131-07-BLOmnium GripSize 200mmCapacity 40mm
111-10-BLCurved JawSize 235mmCapacity 63mm
111-07-BLCurved JawSize 190mmCapacity 42mm
112-10-BLStraight JawSize 235mmCapacity 63mm
112-07-BLStraight JawSize 190mmCapacity 42mm
1010Grip HolderSize 135mmCapacity 60mm
MG2K-040Micro GripSize 92mmCapacity 12mm
1075MultiGrip HolderHolds 5”, 7”, 10”
127-06-BLLong NoseSize 165mmCapacity 55mm
128-08-BLSheet MetalSize 200mmCapacity 45mm
124-06-BLC-ClampSize 165mmCapacity 60mm
125-09-BLU-ClampSize 200mmCapacity 60mm
124-12-BLC-ClampSize 300mmCapacity 100mm
139-10-BLHose ClampSize 235mmCapacity 30mm
111-05-BLCurved JawSize 135mmCapacity 30mm
• Easily aligns panels withdifferent thicknesses – surface to surface – for
smooth / accurate seam welding
Large 50mm diameter circular mirror provides wider view. Powerful magnet lifts 1.6kg. Both tools feature ball joints andtelesopic handles.
Telescopic Mirror & Pick Up Tool (2 pce)
Pack of 100 stainless steel, single edge razor blades. Fits all standard razor blade tools. Plastic storage box included.
Razor Blades (100 Pce)
Fits rubber, plastic & handle clips.
3 in 1 Clip & Trim Remover
Contains brushes with nylon, brass and stainlesssteel bristles. Ideal for cleaning dirt, rust,
peeled paint, including carburetorsor distributors.
3 Pce Cleaning Brush Set
Durable nylon bristles. 3/8” external hose fittingallows liquid to run through handle out the centerof brush head for improved cleaning. Overall length:295mm
Angled Head Parts Cleaning Brush
Durable nylon bristles can be used with general cleaning solvents. An excellent brush for cleaning engines and parts.
Parts Cleaning Brush
$19.95ET0042
NEW
$7.95DA6810
$34.95ET0722
$29.95DA5215
$9.95DA6852
$12.95DA6866
$19.95DA1248
$18.95DA6806
$12.95ET7032
$25.00DA6101
$33.00DA6103
$58.00DA6105
$379.95WH1-SET16-39
$27.95DA0225
$7.95DA1130
$5.95DA1132
Stores advertised on this page of this catalogue are independent businesses. Every effort is made to ensure advertised stock is available, but due to factors beyond the control of Endeavour Tools Pty Ltd, products advertised in this catalogue may not be available at all stores. Pricing for products includeGST are recommended only. Certain items may incur a freight charge in some stores. Endeavour Tools Pty Ltd reserves the right to correct printing errors and omissions. All sizes shown are approximate only, and accessories shown with the product are not included unless specified. All products in this
catalogue were available the time of preparation and Endeavour Tools will, within reason ensure stock of advertised product is available, but cannot be held responsible for unforseen shortfalls, beyond their control. No back orders for those items marked “While Stocks Last”.
6 Piece Extra LongFlat Ring Wrench Set• “Zero Degree Offset” & polished finish• Chrome-Moly Steel• Sizes: 8x10mm 12x14mm 13x15mm
16x18mm 17x19mm 22x24mm
Adjustable Pry Bar Set (3 Pce)Indexing head adjusts to 14 fixed angles. 3 lengths - 250mm / 300mm / 380mm
Your Endeavour Tools Distributor:
Power Probe III Master KitThe ultimate circuit tester kit! Includes:
• Power Probe III circuit tester• ECT2000 – detects SHORT and OPEN circuits• PPLS01 – deluxe lead set• Features external torch
Sizes: OL:8 x 10mm12 x 14mm13 x 15mm16 x 18mm17 x 19mm
315mm394mm407mm420mm460mm
Flexible & Reversible 5pcs Metric Set
Quality Tools - Designed to Last - Made In Taiwan
• Locking end locks bits / sockets onto driver, so they don’t come off in the engine bay!• 1/4” sockets: 5, 6, 7, 8, 10mm• Bits: PH1, PH2, Slotted - 4, 6.5mm, Torx - T10, T15, T20, T25, T27, T30
Flexible Hose Clip Driver (17 pce)
$379.95ETPP3KITFIRE
$279.00XLF5-MET
$149.95LSBM-6
$99.95ET8009
$44.95ET0170
With �ame patternFor a limited time only
Fuel & Air Conditioning Disconnection Kit (21 pce)
• Comprehensive set for separating automotive air conditioning hoses and fuel lines.• Suits a wide variety of vehicles including Ford and GM.
$127.95ET3002
NEW
NEW
NEW
Coolant Filler Japanese | Korean Vehicles• 1 Bleeder Tube• 3 Adaptors (Female Bayonet Type)- #41 (Red) 42mm - #43 (Blue) 44mm - #50 (Black) 57mm• 1 Adaptor (Female Thread) Internal Diameter: - #3 (Yellow) 48mm
Includes
bleeder tubeIncludes
bleeder tube
$97.95ET1265
NEW