energy for today Poly CSUN340-72P Module Fire Performance: Type 1(UL 1703) Fire Resistance Rating: Class C(IEC 61730) CSUN340-72P CSUN335-72P CSUN330-72P CSUN325-72P CSUN320-72P Module efficiency Highest power output Material & Workmanship warranty Linear power output warranty Industry leading conversion efficiency PID free Positive tolerance offer Passed salt mist & ammonia corrosion, blowing sand and hail testing Certificated to withstand wind (2400 Pa) and snow load (5400 Pa) Excellent performance under weak light condition Good temperature coefficient enables better output in hot climates CSUN’s NEW linear performance warranty The power output shall not be less than 97.5% of the minimum power output stated in the product data sheet in the first year of the product’s life cycle. The loss of power output shall not exceed 0.7% per year thereafter, ending with 80.70% in the 25th year. Additional value from CSUN’s linear warranty Standard warranty CSUN 5 years Number of years 10 years 20 years 15 years 25 years 17.55% 340 W 10 Years 25 Years All rights reserved by CSUN Version 7/2018-ENG • • Note: All information and data are subjects to change without notice. The Large Scale Project Solution China Sunergy (Nanjing) Co., Ltd is one of the leading solar cell & module manu- facturers in the world. With full utilization of our manufacturing campuses in China, Turkey, Vietnam, South Korea etc, we research, design, manufacture and distrib- ute high quality and high efficiency solar cells & Modules for the global market. CSUNPOWER is the group member to mainly distribute high quality CSUN solar cells & modules in overseas market and provide our customer turnkey solution services. Till the end of 2017, we already delivered more than 10GW solar modules to 50+countries for residential, commercial and utility-scale PV plants. Distributed By
Transcript
energy for today
Poly CSUN340-72P
Module Fire Performance: Type 1(UL 1703)Fire Resistance Rating: Class C(IEC 61730)
Passed salt mist & ammonia corrosion, blowing sand and hail testing
Certificated to withstand wind (2400 Pa) and snow load (5400 Pa)
Excellent performance under weak light condition
Good temperature coefficient enables better output in hot climates
CSUN’s NEW linear performance warranty
The power output shall not be less than 97.5% of the minimum power output stated in the product data sheet in the first year of the product’s life cycle. The loss of power output shall not exceed 0.7% per year thereafter, ending with 80.70% in the 25th year.
Additional value from CSUN’s linear warranty
Standard warrantyCSUN
5 yearsNumber of years 10 years 20 years15 years 25 years
17.55%
340 W
10 Years
25 Years
All rights reserved by CSUN
Version 7/2018-ENG
•
•
Note: All information and data are subjects to change without notice.
The Large Scale Project Solution
China Sunergy (Nanjing) Co., Ltd is one of the leading solar cell & module manu-facturers in the world. With full utilization of our manufacturing campuses in China, Turkey, Vietnam, South Korea etc, we research, design, manufacture and distrib-ute high quality and high efficiency solar cells & Modules for the global market.
CSUNPOWER is the group member to mainly distribute high quality CSUN solar cells & modules in overseas market and provide our customer turnkey solution services. Till the end of 2017, we already delivered more than 10GW solar modules to 50+countries for residential, commercial and utility-scale PV plants.
Distributed By
Dimensions IV-Curves
Electrical Characteristics at Standard Test Conditions (STC)CSUN 340-72P3400～3%46.69.45388.9517.55%
CSUN 335-72P3350～3%46.49.3637.88.8617.30%
CSUN 330-72P3300～3%46.29.2737.68.7717.04%
CSUN 325-72P3250～3%469.1937.48.6816.78%
CSUN 320-72P3200～3%45.99.137.38.5716.53%
Module TypeMaximum Power - Pmpp (W)Positive Power ToleranceOpen Circuit Voltage - Voc (V)Short Circuit Current - Isc (A)Maximum Power Voltage - Vmpp (V)Maximum Power Current - Impp (A)Module Efficiency
PackagingDimensions（L*W*H）
Container 20’Container 40’HC
2015 x 1170 x 1137 mm260 pcs672 pcs
System DesignTemp. RangeHailMax. CapacityApplication ClassSafety Class
-40℃ to + 85℃Max. diameter of 25mm with impact speed of 23m/s Snow 5400 Pa, wind 2400 PaAII
Temperature Characteristics-0.292%/K+0.045%/K-0.408%/K
Voltage Temperature CoefficientCurrent Temperature CoefficientPower Temperature Coefficient
Maximum Ratings10002027
Maximum System Voltage (V)Series Fuse Rating (A)Reverse Current Overload (A)
1956 x 992 x 40 mm22.1 kgAnodized aluminum profileToughened low iron glass, 3.2 mmEVA (Ethylene-Vinyl-Acetate)Composite film6*12 pieces polycrystalline solar cells series strings (156*156mm)Rated current ≥ 12A, IP ≥ 65, TUV & ULLength 900 mm, 1x4 mm2
Compatible with MC 4
Note:mm(inch)
FRONT VIEW
Cur
rent
/A
Voltage/V
Pow
er/W
Excellent performance under weak light condition.
Standard test conditions (STC): irradiance 1000W/m2; AM 1.5G; cell temperature 25℃. Measuring uncertainty of power is within ±3%. Certified in accordance with IEC 61215, IEC 61730-1/2 and UL 1703.
Electrical Characteristics at Nominal Operating Cell Temperature (NOCT)CSUN 330-72P244437.48356.97
CSUN 340-72P25143.47.6335.47.12
CSUN 335-72P24843.27.5635.37.04
CSUN 325-72P24142.77.4634.76.85
CSUN 320-72P23442.57.3534.66.76
Module TypeMaximum Power - Pmpp (W)Open Circuit Voltage - Voc (V)Short Circuit Current - Isc (A)Maximum Power Voltage - Vmpp (V)Maximum Power Current - Impp (A)Nominal operating cell temperature (NOCT) : irradiance 800W/m2; wind speed 1 m/s; module temperature 45℃； ambient temperature 20℃. Measuring uncertainty of power is within ±3%. Certified in accordance with IEC 61215, IEC 61730-1/2 and UL 1703.
