Engineered Wood
ProductsEast Coast
The Offer4 Major components make up the Engineered
Wood Products (EWP) Offer
- LVL (Laminated Veneer Timber)
- I- Joists
-Glulam (Glued Laminated Timber)
-Timber connectors (Brackets)
Other Key Features
- Various wood treatments
- Takeoff service
- Complimentary design software
- Suits both residential and commercial applications
- Lengths up to 18 metres
- Consistent quality (strength and defect free)
Choice of Leading Manufacturers
Engineered Floor Systems to suite all
applicationsCan be used in a variety of applications
TYPICAL FLOOR LAYOUT
Ridge Beam
Roof Rafter
Wall Intel
Floor Joist
Bearers
Engineered Wood Products (EWP)
Laminated Veneer Lumber (LVL)
- Commonly used as Bearers, Floor Joists, Lintels, Ridge Beams
and Rafters
- Available in sizes from 90x35mm to 600x75mm
- LVL is available in specific commercial product grades. Refer to
individual product and manufacturers span tables for best
selection in each application.
- Various Treatment options available in H2 and H3 against
termite attack and decay
- Commonly used as Floor Joists and Rafters.- Available in sizes from 200x44mm to
400x90mm- Various Treatment options available in H2
to protect against termite attack.- Complete range of brackets available and
various fixing methods for every application
I-Joists
- Typically used in high loads that may
require higher stiffness material that is
beyond the capabilities of LVL.
- Commonly used as Bearers, Lintels, Ridge
Beams and Rafters
- Beams can be ordered pre-cambered or as a
straight beam.
- Available in various treatments in H2 & H3
to protect against termite attack and
fungal decay.
Glulam (Glued Laminated Timber)
- A complete range of hangers to suit all applications.
- Various timber to steel beam fixing methods available
- A number blocking applications to suit every job
Fixing Methods and Hangers
Rim
Joist
- A complete guide to all methods of notching, cut backs and hole cutting.
Hole Cutting
Available treatment options
-H2-S Offers protection against termite
attack, in areas “South of the Tropic of
Capricorn” only.
-H2 Offers protection against termite
attack and is accepted in ALL parts of
Australia
- H3 Offers protection against termite
attack and fungal decay, when used
externally above ground.
Typical Treatment Offers
• The Design Centre offers a free take-off and Engineering Service• This service is not direct to the public, as it is managed by the Bunnings Channel
The Design Centre
The Offer
- A full suite of Technical products is
available
- Design Guides
- Span tables
- Technical Data
- Brochures
- Technical Dept Support via Phone
(one for each brand)
- One Site Support (by appointment)
Technical Support
Design SoftwareFree Design Software available from all leading brands
SmartFrame – Tilling Timber
Brands Include:
SmartLVL 15 – Laminated Veneer Lumber
SmartJoist – I Joist
Red Alert – Bearer and Joist System
FrameSmart – Pine Framing Material
SmartLAM – Glue Laminated Beams
Lutre – Internal Lining Boards
Architectural Claddings – External/Internal
SmartEst – Quick Quotes
Free Design Service
For more details visit www.tilling.com.au
EWP Brands
hySPAN is the product you know and trust
•hySPAN+ offers an alternative to F17 hardwood
beams in traditional sizes
•hyJOIST Engineered I-Joists are cost effective and
lightweight perfect for residential and commercial
construction
•Terminator cost effective termite protection with 25
year guarantee
•Technical Expertise Fully supported by on site CHH
technical expertise and Free phone support – 1800
808 131
•designIT software Free design software
•designIT site Frees smart phone app
EWP Brands
Building Systems
• e-joist
• e-beam
• e-beam+ [F17] JD3(with the same joint strength group as F17 H/Wood)
• e-bearer + joist
• e-garage
• e-house software
East Coast Offer
EWP Brands
The Process
Email or drop off plans to Bunnings
Trade Rep
Select EWP product options and brand
Quote for Take-Off will be provided
A Bunnings Trade Rep will present a
quotation for review and approval by
Builder
Builder to raise an order with Bunnings Trade with signed
approval
Order is placed
Delivery of order to Site as per agreed
date
Can we help?
Bunnings welcome the opportunity to quote your next job.
72 hour quote turnaround.
Please contact your local Bunnings representative or call 133 062.