Date post: | 21-Dec-2015 |
Category: |
Documents |
Upload: | tvkbhanuprakash |
View: | 310 times |
Download: | 3 times |
Jai Guru DevaSri Ganesaya NamahaJai Hind
15 December 2012 2
Course Offered by:
Prof. Bhanuprakash Tallapragada
Dept. of Marine Engineering
College of Engineering
Andhra University
Visakhapatnam - 530003
15 December 2012 3
Engineering Mechanics – II (Dynamics)
Chapter – 12
Lecture 2
15 December 2012 4
General Curvilinear Motion
15 December 2012 5
Curvilinear Motion occurs when the particle moves
along a curved path.
Since the path described is in Three-Dimensions,
vector analysis is used to formulate the particle’s
position, velocity, and acceleration.
In this lecture we look into the general aspects of
curvilinear motion.
Introduction
15 December 2012 6
Position
Consider a particle located at P on a space curve
defined by the path function ‘s’.
The position vector is r = r (t)
15 December 2012 7
Displacement During a small interval of time
∆t, particle moves by a
distance ∆s along the curve to
a new position P/ defined by
The displacement ∆r
represents the change in the
particle’s position
r r r′ = + ∆
15 December 2012 8
Velocity
0lim
avg
t
rvt
r drvt dt∆ →
∆=
∆∆
= =∆
1. dr is tangent to the curve at P
2. Direction of v is also tangent to the curve
3. As ∆t → 0, ∆r approaches ∆s, hence speed (v – scalar) is given by dsv
dt= Thus speed can be obtained by
differentiating path function wrt time
15 December 2012 9
avgvat
∆=
∆
AccelerationParticle has vel v at ‘t’, at t + ∆t, velocity is v/ = v + ∆v
2
2
dv d radt dt
= =
15 December 2012 10
Hodograph• Hodograph is the locus of the arrowhead of the velocity
vector
• ∆v will approach the tangent to the hodograph as ∆tgoes to zero
• Acceleration will always be tangent to the hodographand never tangential to the path
• Velocity is always tangential to the path
15 December 2012 11
1. Position:
2. Here x = x(t), y = y(t), z = z(t), so r = r (t)
3. The magnitude of r is always positive and defined by
4. Direction of r is given by unit vector ur = r/r
Curvilinear Motion : Rectangular Components
r xi yj zk= + +
2 2 2r x y z= + +
i, j, k frame of reference is fixed
15 December 2012 12
Velocity( ) ( ) ( )
( )
x y z
dr d d dv xi yj zkdt dt dt dt
d dx dixi i xdt dt dt
drv v i v j v kdt
= = + +
= +
= = + +
Magnitude is given by
2 2 2x y zv v v v= + +
Direction is given by uv = v/v
15 December 2012 13
Acceleration
, ,
x y z
x x y y z z
dva a i a j a kdt
where a v a v a v
= = + +
= = =
2 2 2x y za a a a= + + Magnitude
Direction is specified by ua = a/a
15 December 2012 14
Suppose you are shooting a projectile up the hill, what angle must you shoot so that it will go the maximum distance along the hill?
15 December 2012 15
Here’s a classic example that every beginning physics student has
traditionally learned.
A hunter sees a monkey in a tree, and decides to shoot it. He
knows that this particular species of monkey always falls
from the tree at the instant the shot is fired. At what angle
must the hunter aim, in order to hit the monkey?
Monkey and Hunter
15 December 2012 16
Monkey and Hunter
15 December 2012 17
The first step is to solve for the time at which
impact occurs.
The x-component of the velocity of the
projectile is v0 cos θ,
The distance in the x-direction is D
so the time of impact is
15 December 2012 18
At the time of impact, the z-coordinates of themonkey and bullet must be the same:
15 December 2012 19
This says that the hunter should aim directly at
the monkey!
The downward acceleration of the monkey
exactly compensates for the downward
acceleration of the bullet, as long as they start
falling at the same time.
15 December 2012 20
It may at first seem a bit surprising that this result
doesn’t depend on the speed of the bullet
But it makes sense when you think about it.
The faster the bullet, the less time the bullet has to fall,
but the monkey also has less time to fall, so the speed
has no effect.
15 December 2012 21
Example:
Estimate the maximum distance a long jumper can
jump. Determine some reasonable values to use in
this problem.
15 December 2012 22
First assume vI = 30 ft/sec (a world class sprinter). Let θ = 45° to maximize the range.
Finally use g = 32 ft/sec2. The range equation gives
R = 28.125 ft
World Record by Bob Beamon in
Mexico Olympics in 1968 is 29ft 2.5 in
15 December 2012 23
Normal and Tangential Components When path is known – n-t coordinate system
convenient Origin located at the particle
15 December 2012 24
Normal and Tangential Components (cont)1. Planar Motion:
2. Particle P is moving in a plane along a fixed curve
3. P is located at distance ‘s’ from a point ‘O’
4. Coordinate system is considered with Origin at P.
5. t-axis is tangent to the curve
6. Positive t-direction represented by ut (unit vector)
15 December 2012 25
The normal coordinate will be directed towards O/, the centre of
curvature of the plane curve.
This is always on the concave side of the curve
Positive direction is un.
The plane containing the n-t axes is called the osculating plane,
and in this case is fixed in the plane of motion
Normal and Tangential Components (cont)
15 December 2012 26
Velocity:1. Velocity is always tangential to the path2. Path s = s(t)3. Magnitude of Velocity = v = ds/dt4. V= v (scalar) x ut (Unit vector - direction)
Normal and Tangential Components (cont)
15 December 2012 27
Normal and Tangential Components (Cont)
Acceleration
Acceleration is the time
rate of change of velocity
v v= = +t ta v u u
v= tV u
15 December 2012 28
Normal and Tangential components (Cont)
1. When particle moves along arc ds in time dt, magnitude of ut does not change (magnitude = 1)
2. Its direction changes to u/t
3. Thus u/t = ut + dut
4. Magnitude of dut= ut dθ =1x dθ
5. Direction is perpendicular to ut i.e., along un
6. Therefore dut = dθ un
n tv v a a= = + = +t t n ta v u u u u
15 December 2012 29
Normal and Tangential Components ( cont)
t n t
2
n
2 2t n
sds=ρdθ; θ=ρ
v
dv dv ds dt dv ds dva a where a =v = × × = × =vdt dt dt ds ds dt ds
va =ρ
a= a a
t n n n
t n
su u u u
a u u
= θ = =ρ ρ
= + =
+
Since
ds
15 December 2012 30
Normal and Tangential Components (cont)Summary
1. Straight line motion ρ = ∞, an = 0, at = dv/dt
2. Curved motion constant speed at = dv/dt = 0, an = v2/ρ –
centripetal acceleration
15 December 2012 31
Normal and Tangential components (Cont)
Radius of curvature is given by
32 2
2
2
dy1+dx
ρ=d ydx
15 December 2012 32
Cylindrical Components
1. In Some Engineering Problems, it is often
convenient to use Cylindrical Coordinate system
r, θ, z
2. If the problem is in plane we use Polar Coordinates
r, θ
15 December 2012 33
Cylindrical Components (contd)
Polar Coordinates
R extends outwards from origin to the particle
θ is measured ccw between fixed reference line and r-axis
Positive directions of r and θ are given by unit vectors ur, uθ
These are perpendicular to one another
ur extends from P along increasing r when θ is held fixed
uθ extends from P in a direction that occurs when r is held fixed and θ is increased
15 December 2012 34
Position: At any instant the position of the particle is defined by the position vector
rrr u=
15 December 2012 35
VelocityInstantaneous velocity is obtained by taking time derivative of r.
r rr rv r u u= = +
0
rr t t tx
uu lim lim uθ∆ → →∞
∆ ∆θ = = ∆ ∆
rθv vrv u uθ= +ru uθ= θ
15 December 2012 36
Velocity Graphically the velocity components are shown
rv r and v rθ= = θ
Magnitude of V is given by 2 2v= (r +(rθ)
15 December 2012 37
Acceleration
r r r r rr ra v u u u u uθ θ θ= = + + θ + θ + θ
0 0t t
r
r
lim limt t
ua a
r
r
uu u
ua u u
θθ ∆ → ∆ →
θ
θ θ
∆ ∆θ = = − ∆ ∆ = −θ
= +
2 2ra r r a r rθ= − θ = θ + θ
15 December 2012 38
Cylindrical Coordinates
In a space curve we have three
coordinates (3 DOF) for a
particle and so we use r, θ, z
( ) ( )2
r z
r r z
r-rθ rθ+2rθ z
P r z
r z
r z
r u u
v u u u
a u u uθ
θ
= +
= + θ +
= + +
15 December 2012 39
Time Derivatives ( Issues)
1. If the coordinates are defined as time parametricequations r = r(t), θ= θ(t), then derivatives are easy
2. In some cases the relationship between r and θ maybe given
Thus of the four time derivatives
namely if we know two,
then we can get the other two from
these equations
r,r,θ,θ