1
ENGOPT 2014
Program (provisional)
Version 01
2
Monday – 08/09/2014 - 2
Session: D-01 Design Optimization and Inverse Problems Room:1
Chair:
Hours ID Speaker Title
10:35-10:55
5736 Lazarov, Boyan S
Topology optimized designs of steady state conduction heat transfer problems with convection boundary conditions Lazarov, Boyan S; Alexandersen, Joe ; Sigmund, Ole
10:55-11:15
5754 Wallin, Mathias
Topology optimization based on inverse motion form finding Wallin, Mathias ; Ristinmaa, Matti
11:15-11:35
5770 Gupta, Deepak K.
Topology optimization for improving the performance of solar cells Gupta, Deepak K.; Langelaar, Matthijs ; Barink, Marco ; van Keulen, Fred
11:35-11:55
5861 Evgrafov, Anton
A locally cubically convergent algorithm for topology optimization of Stokes flows Evgrafov, Anton
11:55-12:15
5894 Nakamura, Hiroyuki
Study on the topology optimization of electronic parts mounted on micro satellite Nakamura, Hiroyuki
12:15-12:35
5906 Silva, Olavo M.
A topology optimization procedure for the vibrational power flow response in 3D FE models Silva, Olavo M.; Neves, Miguel M.; Lenzi, Arcanjo
Session: I-01 Industrial Applications Room:2
Chair:
Hours ID Speaker Title
10:35-10:55
5494 Beauthier, Charlotte
Hypersonic cryogenic tank design using mixed-variable surrogate-based optimization Beauthier, Charlotte ; Hendrick, Patrick ; Mahajan, Ashvin ; Sainvitu, Caroline ; Sharifzadeh, Shayan ; Verstraete, Dries
10:55-11:15
5508 Afzal, Arshad A Multi-Objective Optimization Procedure for Micromixer Design Using MOGA Afzal, Arshad ; Kim, Kwang-Yong
11:15-11:35
5619 Andry, Philippe
Better flexible hoses design thanks to optimization Andry, Philippe
11:35-11:55
5684 Marano, Giuseppe C.
Optimization of a Dissipative Connection in Wall-Frame Systems Greco, Rita ; Marano, Giuseppe C.
11:55-12:15
5885 Aute, Vikrant An Adaptive Multiscale Approximation Assisted Multiobjective Optimization Applied to Compact Heat Exchangers Saleh, Khaled H ; Bacellar, Daniel ; Aute, Vikrant ; Radermacher, Reinhard
12:15-12:35
6038 Popov, Grigorii M.
Seven-stage axial compressor optimization Matveev, Valeriy N.; Egorov, Igor N.; Baturin, Oleg V.; Popov, Grigorii M.
3
Monday – 08/09/2014 -2
Session: N-01 Numerical Optimization Techniques Room:3
Chair:
Hours ID Speaker Title
10:35-10:55
5582 Yang, Songlin The Comprehensive Optimization Analysis of Mechanical properties of the Monohull Ship Yang, Songlin; Yu, Qiang ; Chen, Yi
10:55-11:15
5809 Schatz, Markus
Structural design optimization of aerospace structures considering material selection and sizing Schatz, Markus ; Wehrle, Erich ; Baier, Horst
11:15-11:35
5823 Yurchenko, Vitalina
Optimization Of Steel Structures Based On A Hybrid Genetic Algorithm And Update Gradient Method Yurchenko, Vitalina ; Peleshko, Ivan
11:35-11:55
5974 Ramos, Nuno NR
Railway Seat Structure Optimization for Crashworthiness Improvement using Meta-modeling Ramos, Nuno NR; Ambrosio, Jorge
11:55-12:15
6017 Lee, Jae-Woo Tailless UAV Design Using Variable Fidelity Method with Global Design Search and Radial Basis Function Networks Lee, Jae-Woo ; Tyan, Maxim ; Nguyen, Nhu Van ; Kim, Sangho ; Nah, SeungHyeog
12:15-12:35
6109 Herskovits, José
Structural Optimization Including Constraints on the Natural Frequencies with a Nonlinear Semidefinite Programming Approach Herskovits, José ; Roche, Jean Rodolphe; Bazan, Elmer
Session: E-01 Efficient Analysis and Reanalysis Techniques Room:4
Chair:
Hours ID Speaker Title
10:35-10:55
5525 Yue, Yao Accelerating cyclic steady state optimization of linear simulated moving bed chromatography models by Krylov-type model order reduction methods Yue, Yao ; Li, Suzhou ; Feng, Lihong ; Seidel-Morgenstern , Andreas ; Benner, Peter
10:55-11:15
5643 Camaño, Alexandra L
Development of a new technique for straightening of welding induced distortion in ship structures Camaño, Alexandra L
11:15-11:35
5831 Hidalgo-Silva, Hugo
Improving Linear Inversion Algorithms for Geosounding Inversion Hidalgo-Silva, Hugo ; Gomez-Trevino, Enrique
11:35-11:55
5899 Beremlijski, Petr
On solution of 3D contact shape optimization problems with Coulomb friction based on domain decomposition Beremlijski, Petr ; Markopoulos, Alexandros
11:55-12:15
5946 Shetty, Sandeep
Efficient reliability-based optimization using a combined metamodel and FE-based strategy Shetty, Sandeep
12:15-12:35
5386 Kuzmina, Lyudmila K
A.M.Lyapunov Reduction Principle in Problems of parametric Stability/Optimality for Complex Systems Kuzmina, Lyudmila K
4
Monday – 08/09/2014 - 3
Session: D-02 Design Optimization and Inverse Problems Room:1
Chair:
Hours ID Speaker Title
14:00-14:20
5439 Kuci, Erin Shape Optimization of Interior Permanent Magnet Motor for Torque Ripple Reduction Kuci, Erin ; Geuzaine, Christophe ; Dular, Patrick ; Duysinx, Pierre
14:20-14:40
5512 Gangl, Peter Design Optimization of Electric Machines Using Shape Optimization and Sensitivity-Based Topology Optimization Gangl, Peter ; Langer, Ulrich
14:40-15:00
5842 Vondrejc, Jaroslav
Shape optimization for homogenized phononic materials and band gap structures Rohan, Eduard ; Vondrejc, Jaroslav ; Heczko, Jan
15:00-15:20
5892 Otomori, Masaki
Topology optimization for the design of light-trapping structures considering a uniform cross-sectional constraint Otomori, Masaki ; Yamada, Takayuki ; Izui, Kazuhiro ; Nishiwaki, Shinji ; Kogiso, Nozomu
15:20-15:40
5988 Leon, Jersson X
Tuning Parameters Using Bio-Inspired Multiobjective Optimization Algorithm for Topology Optimization Based on Bacterial Chemotaxis Leon, Jersson X; Guzmán, María A
15:40-16:00
5990 van der Veen, Gijs J.
Integrated optimization of controller and topology for mechatronic systems van der Veen, Gijs J.; Langelaar, Matthijs ; van Keulen, Fred
Session: I-02 Industrial Applications Room:2
Chair:
Hours ID Speaker Title
14:00-14:20
5562 Olivera, Ana C Robust Assignment of Fleet Size and Travel Routes for Transportation to a Single-Destiny Using Optimization via Simulation Gabriel, Baquela Enrique; Olivera, Ana C
14:20-14:40
5142 Harald, Harald Experimental and Analytical Flow Optimization of Hydraulic Accumulators Harald, Harald ; Zimmermann, Uwe ; Hübner, Dirk
14:40-15:00
5575 Kawtummachai, Ruengsak
A Hybrid Harmony Search Algorithm for a Green Vehicle Routing Problem Kawtummachai, Ruengsak ; Shohdohji, Tsutomu
15:00-15:20
5625 Callies, Rainer Optimal Race Course Design for Air Races Callies, Rainer
15:20-15:40
5772 Averbakh, Igor Transportation Network Construction Planning Problems Averbakh, Igor ; Pereira, Jorge
15:40-16:00
5947 Oliveira Júnior, Antonio A. M.
The Ant Colony Optimization Algorithm for Offshore Air Transport in Northeast Of Brazil Mota , Liliane L. O.; Oliveira Júnior, Antonio A. M. ; Souza, Domingos Fabiano D. F. S.; Soletti , João Inácio J. I.; Souza, Thiago X. R.; Carvalho, Sandra Helena S. H. V.; Jesus , Edilson E. ; Rocha, Kamila K. A.
5
Monday – 08/09/2014 - 3
Session: N-02 Numerical Optimization Techniques Room:3
Chair:
Hours ID Speaker Title
14:00-14:20
5740 Gambarelli, Paola
A surrogate-assisted evolutionary algorithm for dynamic structural identification Gambarelli, Paola ; Vincenzi, Loris
14:20-14:40
5815 Mansour, Rami
A Single-loop method for Reliability-Based Design Optimization Mansour, Rami ; Olsson, Mårten
14:40-15:00
5850 Arakawa, Masao
Schemes in Setting Position and Radius of RBF in Convolute RBF for Surrogate Optimization Arakawa, Masao ; Kitayama, Satoshi
15:00-15:20
5910 Zambolini-Vicente, Bruno G. G. L.
Robust Optimization Of Shunt Circuits For The Passive Control Of Composite Structures Zambolini-Vicente, Bruno G. G. L.; Silva, Victor A. C.; de Lima, Antônio M. G.
15:20-15:40
5914 Gubarev, Fedor V
Towards Large-Scale Surrogate-Based Optimization Gubarev, Fedor V; Pospelov, Alexis I.
15:40-16:00
5953 Rajaram, Dushhyanth
An improved methodology for Airfoil shape optimization using Surrogate based design optimization Rajaram, Dushhyanth ; Pant, Rajkumar
Session:MS6-01 MS06 - Inverse Problems in Engineering Room:4
Chair:
Hours ID Speaker Title
14:00-14:20
5620 Martins, Nuno F. M.
Direct and optimization methods for the localization of immersed obstacles in porus media. Martins, Nuno F. M.
14:20-14:40
5732 Wilke, Daniel Nicolas
Comparison of two inverse strategies to characterize soil profiles Wilke, Daniel Nicolas; Kok, Schalk ; Heymann, Gerhard
14:40-15:00
5739 Kok, Schalk Estimating the stress-strain curve of steel wire Kok, Schalk ; Wilke, Daniel
15:00-15:20
5779 Mierzwiczak, Magdalena
Determination of non-uniformity of unidirectional fibrous porous media as inverse problem Kolodziej, Jan A; Mierzwiczak, Magdalena ; Fritzkowski, Pawel
15:20-15:40
5789 Jansen van Rensburg, Gerhardus J
Simultaneous boundary value and material parameter estimation using imperfect compression data. Jansen van Rensburg, Gerhardus J; Kok, Schalk ; Wilke, Daniel N
15:40-16:00
5922 Asaadi, Erfan Using inverse mapping to directly solve inverse problems Asaadi, Erfan ; Kok, Schalk ; Heyns, Stephan
6
Monday – 08/09/2014 - 4
Session: D-03 Design Optimization and Inverse Problems Room:1
Chair:
Hours ID Speaker Title
16:15-16:35
5691 Vicente, Diogo A.
Parameterization Formulations for Aerofoil Shape Optimization Vicente, Diogo A.; Gamboa, Pedro V.; Silvestre, Miguel A.R.
16:35-16:55
5695 Pant, Rajkumar S
Surrogate Based Analysis and Shape Optimization of and Aerostat Envelope Pant, Rajkumar S; Paul, Smritinandan ; Patil, Dhaval A
16:55-17:15
5843 Papadimitriou, Dimitrios I.
Robust reliability-based aerodynamic shape optimization Papadimitriou, Dimitrios I.; Papadimitriou, Costas
17:15-17:35
6383 Patho, Robert Optimal shape design in frictional contact problems with a solution-dependent friction coefficient Patho, Robert
17:35-17:55
6760 Zapletal, Jan BEM Based Shape Optimization Using Subdivision Surfaces Zapletal, Jan ; Merta, Michal
Session: I-03 Industrial Applications Room:2
Chair:
Hours ID Speaker Title
16:15-16:35
5464 Holopainen, Sami K
A model for scheduling using supplier/vendor selection Holopainen, Sami K
16:35-16:55
5538 Lin, Shin-Yeu Heuristic Distributed Algorithm for Optimization of Time Slot Utilization in RFID Reader Network Lin, Shin-Yeu ; Hsieh, Chia-Hsiang
16:55-17:15
5656 Mavromatidis, Georgios
Multi-objective optimization to simultaneously address energy hub sizing, layout and scheduling using a linear formulation Mavromatidis, Georgios ; Evins, Ralph ; Orehounig, Kristina ; Dorer, Viktor ; Carmeliet, Jan
17:15-17:35
6363 Ali, Abdalla Dynamic Job Shop Scheduling with Alternatives Routes based on Genetic Algorithm Ali, Abdalla ; Hackney, Phil ; Birkett, Martin ; Bell, David
17:35-17:55
5757 Donoso-Bravo, Andrés
Optimization in biogas processes production. The importance of global sensitivity analysis, optimization procedure and uncertainty analysis Donoso-Bravo, Andrés ; Carrera-Chapela, Fabio ; Ruiz-Filippi, Gonzalo
7
Monday – 08/09/2014 - 4
Session: S-01 Sensitivity Analysis Room:3
Chair:
Hours ID Speaker Title
16:15-16:35
5876 Sigmund, Ole A comparison of SIMP, topological derivatives and other topology optimization approaches Sigmund, Ole
16:35-16:55
5630 Lavasan, Arash
Sensitivity analysis of the model response in mechanized tunnelling simulation ? A case study assessment Zhao, Chenyang ; Lavasan, Arash A; Schanz, Tom
16:55-17:15
5642 Plazaola, Carlos R
Sensitivity Analysis of the Stability of Buried Anisotropic Material Circular Cylindrical Shells Including Soil Interaction Plazaola, Carlos R; Medina, Ana E
17:15-17:35
5858 Lise, Noël Shape optimization of bimaterial (micro)structures using XFEM and a level set description Lise, Noël ; Pierre, Duysinx
17:35-17:55
5396 Sammani D A Revised Vertex Enumeration Algorithm Via Dual Fourier-Motzkin Elimination Method: Abdullahi, Sammani D
Session:MS6-02 MS06 - Inverse Problems in Engineering Room:4
Chair:
Hours ID Speaker Title
16:15-16:35
5651 Colaco, Marcelo J
Bayesian Estimate of Mass Fraction of Burned Fuel in Internal Combustion Engines Using Pressure Measurements Estumano, Diego C; Hamilton, Fabiana C; Colaco, Marcelo J; Leiroz, Albino JK; Carvalho, Rogerio N; Dulikravich, George S; Orlande, Helcio RB
16:35-16:55
5657 Silva, Tiago A. N.
Probability distribution estimation based on experimental variability using differential evolution Silva, Tiago A. N.; Loja, Maria A. R. ; Carvalho, Alda ; Maia, Nuno M. M. ; Barbosa, Joaquim I.
16:55-17:15
5753 Kolodziej, Jan Meshless Methods for the Inverse Problem Related to the Determination of Non-Newtonian Fluid Properties from the Volume Flow Experiment Mierzwiczak, Magdalena ; Grabski, Jakub ; Kolodziej, Jan K
17:15-17:35
5797 Francisco, Paulo R. V.
Multicriteria Optimization Techniques Applied To Vehicle Accident Reconstruction Francisco, Paulo R. V.; Dias, Joao M. P.; Sousa, Luis A. G.
17:35-17:55
5887 Takeda, Norio Measurement-Simulation Hybrid Modeling for Estimating Unmeasured Responses Takeda, Norio
8
Tuesday – 09/09/2014 - 1
Session: D-04 Design Optimization and Inverse Problems Room:1
Chair:
Hours ID Speaker Title
08:40-09:00
5553 Igor, Mainenti-Lopes
Application of Generalized Extremal Optimization (GEO) Technique to Design a Orbit Transfer Solar Sail Control System Igor, Mainenti-Lopes ; Luiz, Souza ; Fabiano, Sousa
09:00-09:20
5676 Benndorf, Joerg
Performance Optimization of Complex Continuous Mining System Using Stochastic Simulation Soleymani Shishvan, Masoud ; Benndorf, Joerg
09:20-09:40
5810 Choi, Han-Lim Information-Maximizing Adaptive Design of Experiments for Wind Tunnel Testing Choi, Han-Lim ; Ahn, Jaemyung ; Cho, Doo-Hyun
09:40-10:00
5935 Ramalhinho, Helena
A Polynomial Algorithm for a Special Case of the One-Machine Scheduling Problem with Time-Lags Ramalhinho, Helena
10:00-10:20
7047 Turteltaub, S. Isogeometric Shape Optimization for Time-Dependent Problems Turteltaub, S. ; Wang, Z.P.
Session: I-04 Industrial Applications Room:2
Chair:
Hours ID Speaker Title
08:40-09:00
5423 Perelmuter, Anatoly V
Optimization of the Overload-Protection Degree Perelmuter, Anatoly V; Veriuzhska, Tetiana Y
09:00-09:20
5817 Morvaj, Boran Optimal selection and operation of distributed energy resources for an urban district Morvaj, Boran ; Evins, Ralph ; Carmeliet, Jan
09:20-09:40
5408 Othman, Mahmoud Mohamed
A Firefly Based Optimization Technique for Optimal Planning of Voltage Controlled Distributed Generators Othman, Mahmoud Mohamed; El-Kattam, Walid Seif; Hegazy, Yasser Gamal; Abdelaziz, Almoataz Youssef
09:40-10:00
6762 Alhasan, Ishaq An Integrated MILP Model for Optimal Operation of a Network of Gas Oil Separation Plants: An Industrial Case Study Alhasan, Ishaq ; Liu, Songsong ; Papageorgiou, Lazaros G.
10:00-10:20
5958 Hrebicek, Jiri Optimization of Corporate Performance Using Data Envelopment Analysis with Maple Hrebicek, Jiri ; Chvatalova, Zuzana ; Trenz, Oldrich ; Soukopova, Jana
9
Tuesday – 09/09/2014 -1
Session:MS6-03 Room:3
Chair:
Hours ID Speaker Title
08:40-09:00
5900 Fernandez de Bustos, Igor
On introducing restrictions for mechanism design Fernandez de Bustos, Igor ; García Marina, Vanessa ; Ansola, Ruben ; Abasolo, Mikel
09:00-09:20
5950 Borges, João E.
A new aerodynamic inverse method for the design of ducts Borges, João E.
09:20-09:40
5962 Pinto, Luis Fall detection modeling based on inverse problems Pinto, Luis ; Figueiredo, Isabel ; Kumar, Sunil N.; Leal, Carlos
Session:MS1-01 MS01 - Topology Optimization For Structural Static and Dynamic Failures Room:4
Chair:
Hours ID Speaker Title
08:40-09:00
5563 Kim, Ki Hyun Research on the layout of both rigid and porous materials in the acoustic topology optimization for noise barrier Kim, Ki Hyun ; Yoon, Gil Ho
09:00-09:20
5564 Arimitsu, Yutaka
Optimum Structures of Micropolar Materials Depending on Elastic Constants Arimitsu, Yutaka ; Wu, Zhiqiang ; Sogabe, Yuji ; Kimura, Takuto
09:20-09:40
5674 Salazar de Troya, Miguel A
Adaptive Mesh Refinement in Stress-Based Topology Optimization Salazar de Troya, Miguel A.; Tortorelli, Daniel A.
09:40-10:00
5688 Bruggi, Matteo
A robust approach to the optimization of structures made of unilateral material Bruggi, Matteo ; Duysinx, Pierre
10:00-10:20
5908 Kovács, Flórián
Optimal packages: binding regular polyhedra Kovács, Flórián
10
Tuesday – 09/09/2014 - 2
Session: D-05 Design Optimization and Inverse Problems Room:1
Chair:
Hours ID Speaker Title
10:35-10:55
5529 Gutierrez, Sergio
An overview of results for Inverse Problems using Small Amplitude Homogenization Gutierrez, Sergio
10:55-11:15
5612 Inglese, dr Gabriele
Recovering the functional form of nonlinear heat transfer by means of thermal imaging Inglese, dr Gabriele
11:15-11:35
5791 Sobota, Tomasz
Numerical Inverse method for determining heat flux distribution on the combustion chamber water wall Sobota, Tomasz
11:35-11:55
5839 Libotte, Gustavo B
A Graphic Java Interface for the Calculation of Double Azeotropes by the Inversion of Functions from the Plane to the Plane Libotte, Gustavo B; Platt, Gustavo M; Guedes, Aline D L
11:55-12:15
5879 Guedes, Aline de Lima
Inversion of Function from the Plane to the Plane to solve Nonlinear Algebraic Systems: Calculating of Double Azeotrope using the Modified Raoult?s Law Guedes, Aline de Lima ; Platt, Gustavo Mendes; Neto, Francisco Duarte Moura
12:15-12:35
5940 Ferreira, Patricia A. D.
Inverse problems applied to the optimization of numerical model validation of railway track dynamic behavior Ferreira, Patricia A. D.; Maciel, Rui
Session: I-05 Industrial Applications Room:2
Chair:
Hours ID Speaker Title
10:35-10:55
5600 Wurm, M.Sc. Andreas
Automotive Shift Quality Optimization based on Piecewise Monotone Interpolation of Parameter Characteristics Wurm, M.Sc. Andreas ; Bestle, Prof. Dr.-Ing. habil. Dieter ; Kahlbau, Dr.-Ing. Sebastian
10:55-11:15
5650 Dias, Pedro H. C.
Automotive Powertrain Optimization by Genetic Algorithm Analysing Transmission Ratios Colherinhas, Gino B.; Dias, Pedro H. C. ; Rodrigues, Anna Paula S. P. ; Diniz, Alberto C. G. C.
11:15-11:35
5697 Bapst, Roman Model-Linearisation Strategies for MPC of the Air-Path of a Diesel Engine Bapst, Roman ; Jakob, Marcel ; Asprion, Jonas ; Guzzella, Lino
11:35-11:55
5698 Carvalheira, Pedro de F. V.
Optimization of the Fuel Consumption of M3165 Four-Stroke Internal Combustion Engine Carvalheira, Pedro de F. V.; Nunes, Jorge Miguel F.
11:55-12:15
5816 Centeno, Felipe FOCEG
Optimizing parameters of a downdraft biomass gasifier Centeno, Felipe FOCEG; Arruda, Karina KAA; Lora, Electo EESL; Gonçalvez, Jose JLG
12:15-12:35
5907 Cada, Roman Designing and optimizing nuclear fuel loadings Cada, Roman
11
Tuesday – 09/09/2014 -2
Session: N-03 Numerical Optimization Techniques Room:3
Chair:
Hours ID Speaker Title
10:35-10:55
5506 Secchi, Argimiro R
A Comparative Study between wavelet-adaptive Multiple Shooting and Single Shooting implemented in a Matlab-EMSO environment Santos, Lizandro S; Secchi, Argimiro R; Biscaia Jr., Evaristo C
10:55-11:15
5678 Roche, Jean R. Interior Point Method for Nonlinear Semidefinite Programming, Convergence Analysis and Numerical Results in Structural and Multidisplinary Optimization Roche, Jean R.; Herskovits, José; Bazan, Elmer ; Aroztegui, Miguel
11:15-11:35
5685 Smietanski, Marek J
An exponential generalized Newton method for solving unconstrained optimization problems Smietanski, Marek J
11:35-11:55
5763 Costanzo, Stefano
MOGASI: a multi-objective Genetic Algorithm for efficiently handling constraints and diversified decision variables. Costanzo, Stefano ; Castelli, Lorenzo ; Turco, Alessandro
11:55-12:15
5937 Tobias, Linke Recent advances in the solution of large nonlinear optimisation problems with WORHP Tobias, Linke ; Dennis, Wassel ; Christof, Büskens
12:15-12:35
5965 Goulart, Evandro
Large Scale Sparse Nonlinear Constrained Optimization based on FAIPA, the Feasible Arc Interior Point Algorithm Goulart, Evandro ; Herskovits, José
Session:MS1-02 MS01 - Topology Optimization For Structural Static and Dynamic Failures Room:4
Chair:
Hours ID Speaker Title
10:35-10:55
5474 Michailidis, Georgios
Comparison of formulations and strategies for thickness control in shape and topology optimization via a level-set method Allaire, Gregoire ; Jouve, Francois ; Michailidis, Georgios
10:55-11:15
5523 Diaz, Alejandro R
A 3D printing model suitable for topology optimization Diaz, Alejandro R; Akandeh, Atra ; Kwon, Patrick
11:15-11:35
5544 Rozvany, George I. N
Major advances in exact structural topology optimization: stress and displacement based multi-load design Rozvany, George I. N.; Pomezanski, Vanda O.; Sokol, Tomasz ; Pintér, Erika
11:35-11:55
5568 Aulig, Nikola Towards Multi-objective Topology Optimization of Structures subject to Crash and Static Load Cases Aulig, Nikola ; Nutwell, Emily ; Menzel, Stefan ; Detwiler, Duane
11:55-12:15
5586 Christiansen, Asger N.
Combined shape and topology optimization for minimization of von Mises Stress Christiansen, Asger N.; Tortorelli, Daniel A.; Aage, Niels ; Sigmund, Ole
12:15-12:35
5813 Sokol, Tomasz New numerical and exact solutions of generalized Michell trusses subject to multiple load cases Sokol, Tomasz
12
Tuesday – 09/09/2014 - 3
Session: D-06 Design Optimization and Inverse Problems Room:1
Chair:
Hours ID Speaker Title
14:00-14:20
5416 Hallak , Patrícia Habibi
A genetic algorithm for optimization of spatial trusses considering self-weight loads Lemonge, Afonso Celso de Castro Lemonge C.C.; Patrícia, Patrícia Habibi Hallak ; Helio, Helio José Corrêa Barbosa ; Goliatt, Leonardo Goliatt da Fonseca
14:20-14:40
5594 Logo, Janos Optimal design of curved folded plates by optimality criteria method Balogh, Bence ; Logo, Janos
14:40-15:00
5780 Kanno, Yoshihiro
A Mixed-Integer Programming Approach to Design of Periodic Structures with Negative Thermal Expansion Hirota, Masayuki ; Kanno, Yoshihiro
15:00-15:20
5979 Dzierzanowski, Grzegorz
Multiphase elastic structures of minimal compliance Cherkaev, Andrej ; Dzierzanowski, Grzegorz
15:20-15:40
6362 Jensen, Hector A.
Component Mode Synthesis Techniques For Reliability-Based Design Optimization Of Large Scale Structural Models Jensen, Hector A.
15:40-16:00
5482 Jahjouh, Mahmoud M
Structural Identification of Two Dimensional Shear Buildings using a Modified Adaptive Harmony Search Algorithm Jahjouh, Mahmoud M; Nackenhorst, Udo
Session: I-06 Industrial Applications Room:2
Chair:
Hours ID Speaker Title
14:00-14:20
5389 Lacor, Chris The potential of Support vector machines and Kriging in modelling the gas cyclone performance Elsayed, Khairy ; Vucinic, Dean ; Lacor, Chris
14:20-14:40
5468 Reis, Renata Lins
Optimization of a Silver Catalyzed Formaldehyde Plant Using Artificial Neural Networks Reis, Renata Lins; Fontes, Raony Maia; Kalid, Ricardo de Araujo; Fernandes, John Kennedy de Oliveira; Pontes, Karen Valverde
14:40-15:00
5727 Soletti, João Inácio J I
Mixture Optimization and Analysis of the Chemical Behavior of Different Types of Ethanol For Export Soletti, João Inácio J I ; Carvalho, Sandra S H V; Pedulla, Maria Clara M C O
15:00-15:20
5744 Luz Junior, Luiz F. L.
Achievement of metamodels for optimization of methylamines production process through computer aided design Machado, Alex V. L.; Leitoles, Delano P.; Lenzi, Marcelo K.; Yamamoto, Carlos I.; Luz Junior, Luiz F. L.
15:20-15:40
5982 Ivanov, Kirill S Basics of optimal design and functional parameters evaluation for crushing and sorting process chains in mining industry Ivanov, Kirill S; Mezenin, Anton ; Vaisberg, Leonid A
15:40-16:00
5574 Lopes, Manuel Pereira
Optimization of storage space in ports? cereal storage silos ? a case study Cardoso, Mónica Glória; Ferreira, Eduarda Pinto; Lopes, Manuel Pereira; Lopes, Jorge Cardia
13
Tuesday – 09/09/2014 - 3
Session: N-04 Numerical Optimization Techniques Room:3
Chair:
Hours ID Speaker Title
14:00-14:20
5548 Pellegrini, Riccardo
Application of derivative-free multi-objective algorithms to reliability-based robust design optimization of a high-speed catamaran in real ocean environment Pellegrini, Riccardo ; Rinaldi, Francesco ; Campana, Emilio ; Diez, Matteo F.; Fasano, Giovanni ; Iemma, Umberto ; Liuzzi, Giampaolo ; Lucidi, Stefano
14:20-14:40
5567 Bakker, Craig Multi-Objective Optimization, MDO and Differential Geometry Controlled Pareto Front Solution Spacing Bakker, Craig ; Parks, Geoffrey
14:40-15:00
5580 Yang, Songlin A Study on Multidisciplinary Design Optimization Method for Unmanned Underwater Vehicle Wang, Mengyun; Wei, Zifan; Yu, Qiang ; Yang, Songlin
15:00-15:20
5777 de Oliveira, Leonardo C
Use of Evolutionary Dynamic Weighted Aggregation for the solutions of Robust Design Optimization de Oliveira, Leonardo C; Monteiro, Hugo VQ; Afnso, Silvana MB
15:20-15:40
5803 Medina, Juan C
Optimization under Uncertainty through Adaptive Kriging Metamodeling in Augmented Input Space Medina, Juan C; Taflanidis, Alexandros A
15:40-16:00
5933 Chung, Joon Aircraft Derivative Design Optimization Process with Uncertainty of Analysis Tools Park, Hyeong-Uk ; Chung, Joon ; Lee, Jae-Woo ; Neufeld, Daniel
Session:MS5-01 MS05 - Optimization of Laminated Composite Structures Room:4
Chair:
Hours ID Speaker Title
14:00-14:20
5819 Lund, Erik On Discrete Material and Thickness Optimization of Laminated Composite Structures using Filters Sørensen, René ; Lund, Erik
14:20-14:40
5915 Figueiredo de Sá, Ricardo
Multi-Objective Optimization of a 3D Composite Structure Figueiredo de Sá, Ricardo ; van Hattum, Ferrie W.J.; Sá , César J. M. A.; Nunes, J.P.
14:40-15:00
5469 Ferreira, Rafael T L
Hierarchical optimization of fiber reinforced composites for natural frequencies Ferreira, Rafael T L ; Rodrigues, Helder C; Guedes, José M
15:00-15:20
6010 Hernandes, Jose Antonio J.A.H
Advanced DMO Approximations for Frequency Maximization of Laminated Composites Guerrini Filho, Helio H.G.F; Hernandes, Jose Antonio J.A.H; Ferreira, Rafael Thiago Luiz R.T.L.F
15:20-15:40
5711 Faria, Alfredo R
Optimization of composite structures under multiple load cases using a discrete approach based on lamination parameters Faria, Alfredo R
15:40-16:00
6290 Rezaei, Sepideh
Multi Objective Optimization of Laminated Composite Materials with Weight and Reliability Objective Functions Rezaei, Sepideh ; Jalaei Zadeh, Mohammad Foad
14
Tuesday – 09/09/2014 - 4
Session: D-07 Design Optimization and Inverse Problems Room:1
Chair:
Hours ID Speaker Title
16:15-16:35
5531 Pedersen, Niels L
On Optimization of internal/external Spur Gears Tooth Bending Strength Pedersen, Niels L
16:35-16:55
5841 Rayneau-Kirkhope, Daniel
Optimization of hierarchical structures for withstanding gentle compressive loads Rayneau-Kirkhope, Daniel ; Farr, Robert ; Mao, Yong
17:15-17:35
5860 Hedaya, Mohammed M.
Weight Minimization of Truss Structures Subjected to Dynamic Loading Hedaya, Mohammed M.; Elsabbagh, Adel M.; Hussein, Ahmed M.
17:35-17:55
5588 Messager, Tanguy
Numerical direct evolutionary identification of constitutive semi-crystalline polymer model parameters Abdul-Hameed, Hemin ; Messager, Tanguy ; Zaïri, Fahmi ; Naït-Abdelaziz, Moussa
Session: I-07 Industrial Applications Room:2
Chair:
Hours ID Speaker Title
16:15-16:35
5528 Ahn, Jiwoong Polymer Electrolyte Fuel Cell Performances Enhanced by Under-Rib Convection Ahn, Jiwoong ; Lee Jungkoo ; Nguye, Vinh ; Park Sangki Duy; Kim, Hyung-Man ; Choi, Kap-Seung
16:35-16:55
5573 Sabartova, Zuzana
An optimization model for truck tyres'' selection Sabartova, Zuzana ; Lindroth, Peter
16:55-17:15
5954 Taler, Jan Optimum heating of the boiler evaporator taking into account thermal stresses Taler, Jan ; Taler, Dawid ; Dzierwa, Piotr ; Harchut, Piotr
17:15-17:35
5864 Wu, Zhiqiang An approach to optimal design of golf clubhead with considering off-center shot Wu, Zhiqiang ; Sogabe, Yuji ; Arimitsu, Yutaka ; Tamaogi, Takayuki
17:35-17:55
5969 Arzate Salgado, Juan Antonio
Modeling and parameter estimation of a biogas pilot-plant operated with maize silage using a two-step model Arzate Salgado, Juan Antonio; Cruz Bournazou, Mariano N; Kirstein, Max ; Neubauer, Peter ; Junne, Stefan ; Habermann, Boris
15
Tuesday – 09/09/2014 - 4
Session:MS2-01 MS02 - Optimization in Oil and Gas Industries Room:3
Chair:
Hours ID Speaker Title
16:15-16:35
5409 Horowitz, Bernardo
A Multifidelity Approach to Waterflooding Optimization Fragoso, Manuel ; Horowitz, Bernardo ; Rodrigues, José Roberto
16:35-16:55
5426 Afonso, Silvana MB
Multicriteria Solutions for Optimum Reservoir Management Afonso, Silvana MB; De Oliveira, Leonardo C; Pinto, Jefferson WO; Horowitz, Bernardo ; Willmersdorf, Ramiro B
16:55-17:15
5488 Eduardo, Camponogara
An MILP Formulation for Scheduling Oil Tankers for Offloading Operations with Variable Travel Time Leonardo, de Assis S.; Eduardo, Camponogara ; Agustinho, Plucenio
17:15-17:35
5622 Lenz, Ralf Optimal Extension of Gas Transmission Networks Lenz, Ralf ; Schwarz , Robert ; Serrano, Felipe
17:35-17:55
5661 Fabiany, Fabiany Lamboia L., F.
A modified Shuffled frog-leaping algorithm to model products transport in pipeline networks Fabiany, Fabiany Lamboia L., F.; Valéria, L úcia Valéria Ramos de Arruda A., L. V.; Flávio, Fl avio Neves Jr. N. Jr, F.
Session:MS5-02 MS05 - Optimization of Laminated Composite Structures Room:4
Chair:
Hours ID Speaker Title
16:15-16:35
5569 Piotr, Kedziora Optimal design of composite structures subjected to fatigue loading in a fuzzy environment Piotr, Kedziora ; Muc, Aleksander
16:35-16:55
5726 Oganesyan, Paul A.
Reducing of the stress concentration near mounting zones of the wind turbine composite blade Oganesyan, Paul A.; Zhilyaev, Igor V.; Shevtsov, Sergey N.; Wu, Jiing K.; Huang, Jyun P.; Shevtsova, Varvara S.
16:55-17:15
6084 Madeira, Jose F.A.
Multiobjective optimization of damped composite sandwich structures Madeira, Jose F.A.; Araujo, Aurelio L.; Mota Soares, Cristovao M.; Mota Soares, Carlos A.
17:15-17:35
6056 Rodrigues, Gonçalo P
Combined Topology and stacking sequence optimization of composite laminated structures for structural performance measures. Rodrigues, Gonçalo P; Guedes, José M; Folgado, João
17:35-17:55
6023 Jalaei Zadeh, Mohammad Foad
Comparison of optimization methods for weight minimization of laminated composite panels Jalaei Zadeh, Mohammad Foad ; Gharavi, A R
16
Wednesday – 10/09/2014 - 1
Session: D-08 Design Optimization and Inverse Problems Room:1
Chair:
Hours ID Speaker Title
08:40-09:00
5491 Brochier, Felipe O. B.
Optimization of an unitary split system air conditioner with variable refrigerant flow Brochier, Felipe O. B.; Indrusiak, Maria L. S.; Wander, Paulo R.
09:00-09:20
5587 Stoerkle, Johannes
Optimization and Investigation of the Dynamical-optical Behavior of Mirror Systems Stoerkle, Johannes ; Wengert, Nicolai ; Eberhard, Peter
09:20-09:40
5705 Wais, Piotr Opitmization of a car radiator fin shape Wais, Piotr
09:40-10:00
5904 António, Carlos AC
Determination of peel strength based on composition of adhesives for the footwear industry using genetic algorithm Paiva, Rosa MM; António, Carlos AC; Silva, Lucas FM
10:00-10:20
5945 Ocal, Arda Determination of Layer Properties for Full Depth Asphalt Pavements Using Artificial Neural Network Based Gravitational Search Algorithm Ocal, Arda ; Pekcan, Onur
Session: I-08 Industrial Applications Room:2
Chair:
Hours ID Speaker Title
08:40-09:00
5662 Yi, Sung Design Optimization of Silicon Condenser Microphone Yi, Sung
09:00-09:20
5771 Köthe, Thomas
Shape optimization of aircraft cabin ventilation components using adjoint CFD Köthe, Thomas ; Herzog, Sebastian ; Wagner, Claus
09:20-09:40
5807 Panek, David Shape optimization of inductors for preheating before laser welding and hardening. Panek, David ; Kotlan, Vaclav ; Dolezel, Ivo ; Hamar, Roman ; Pavel, Kus
09:40-10:00
6094 Demet, Seyit Mehmet
Experimental Study Optimizied with Taguchi Method of Wear Behaviors of Reinforced PTFE Alloy Pivot Pin Bearings Imrek, Hüseyin ; Demet, Seyit Mehmet
10:00-10:20
6304 Firat, Veysal Determination of Sliding Ratio of V-Belt Pulley Mechanisms by Optimizing the Belt Tension Firat, Veysal ; Imrek, Huseyin
17
Wednesday – 10/09/2014 -1
Session:MS4-01 MS04 - Optimization Methods in Biomechanics and Biomedical Engineering Room:3
Chair:
Hours ID Speaker Title
08:40-09:00
5794 Ruben, Rui B. Optimization of Mandibular Symphysis Plates Positioning Ruben, Rui B.; Dinis, Jairson C. ; Kemmoku, Daniel T.; Noritomi, Pedro Y.; Silva, Jorge V.L.
09:00-09:20
5957 Lino, Jorge A framework for custom design and fabrication of cranio-maxillofacial prostheses using investment casting Csáky, Viktor ; Neto, Rui ; Duarte, Teresa J.; Couto, Mafalda P.; Machado, Margarida ; Lino, Jorge
09:20-09:40
5975 Ribeiro, Nelson S.
Parametric Optimization of Coronary stents based on Finite Element Models Ribeiro, Nelson S.; Folgado, João O.; Rodrigues, Hélder C.
09:40-10:00
6033 Maranha, Vitor
External Fixator configurations in tibia fractures - Numerical Optimization and Experimental Validation Maranha, Vitor ; Samarra, Miguel ; Neto, Augusta ; Amaro, Ana ; Roseiro, Luis
10:00-10:20
6049 Almeida, Henrique A
Structural and Vascular Evaluation of Polymer Degrading Scaffolds Almeida, Susana R; Freitas, Dino M; Almeida, Henrique A; Bártolo, Paulo J
Session:MS3-01 MS03 - New Advances in Derivative-Free Optimization Methods for Engineering Optimization
Room:4
Chair: Ana Custódio
Hours ID Speaker Title
08:40-09:00
5470 Kux, Steffen Hybrid Multi-Criterion Optimization Strategies for complex technical problems Kux, Steffen
09:00-09:20
5865 Kaliszewski, Ignacy
Pareto suboptimal designs with assessments of the Pareto optimality gaps Kaliszewski, Ignacy ; Kiczkowiak, Tomasz ; Miroforidis, Janusz
09:20-09:40
5878 Regis, Rommel G
A Radial Basis Function Algorithm for Constrained Expensive Multi-Objective Optimization Regis, Rommel G
09:40-10:00
5693 Pires, Tiago T. Structural optimization of a joined wing aircraft using DMS algorithm Pires, Tiago T.; Madeira, J. F. A. ; Suleman, Afzal
18
Wednesday – 10/09/2014 - 2
Session: D-09 Design Optimization and Inverse Problems Room:1
Chair:
Hours ID Speaker Title
10:35-10:55
5411 Pedersen, Pauli
Design of material anisotropy constitutive matrices for structural stiffness and strength optimization Pedersen, Pauli ; Pedersen, Niels
10:55-11:15
5551 Barbarosie, Cristian
Multi-objective optimization of composite materials with negative Poisson ratios Barbarosie, Cristian ; Toader, Anca-Maria ; Lopes, Sérgio
11:15-11:35
6313 Dimitrovová, Zuzana
Optimization of a material with a negative stiffness provided by an inherent bistable element Heczko, Jan ; Dimitrovová, Zuzana ; Rodrigues, Hélder
11:35-11:55
5889 Hao, Junhong Porosity Distribution Optimization in Insulation Materials by the Variational Method Hao, Junhong ; Chen, Qun ; Hu, Kang
11:55-12:15
6021 Tovar, Andres Optimization of Heterogeneous Microstructure Using Statistical and Physical Descriptors within a Cellular Automaton Reconstruction Framework Emami, Anahita ; Wu, Tong ; Tovar, Andres
12:15-12:35
5670 Boussaa, Djaffar
Optimization of thermoelastic functionally graded materials using a nonsmooth Newton method Boussaa, Djaffar
Session: I-09 Industrial Applications Room:2
Chair:
Hours ID Speaker Title
10:35-10:55
5495 Couceiro, Iván Structural optimization of power transmission towers using the simulated annealing algorithm Couceiro, Iván ; Martínez, Santiago ; París, José ; Colominas, Ignasi ; Navarrina, Fermín ; Casteleiro, Manuel
10:55-11:15
5634 Brudlo, Krzysztof
Biomimetic Structural Optimization Technique in Multiphysics Industrial Application Nowak, Michal S; Hausa, Hubert ; Roszak, Robert ; Morzynski, Marek ; Brudlo, Krzysztof
11:15-11:35
5694 Ide, Takanori Structural optimization methods to design light weight automatic transmission of vehicles with low radiated noise Ide, Takanori ; Otomori, Masaki ; Leiva, Juan Pablo; Watson, Brian C
11:35-11:55
5742 Afonso, Silvana Maria B.
Design optimization of equivalent mooring system on truncated depth Ferreira, Fábio Martins Gonçalves; Lages, Eduardo N.; Afonso, Silvana Maria B.; Lyra, Paulo Roberto M.
11:55-12:15
5808 Jakubek, Daria Adjoint-based shape optimization of high-speed trains Jakubek, Daria ; Herzog, Sebastian ; Wagner, Claus
12:15-12:35
5814 Mankovits, Tamás
SVR And FEA Based Shape Optimization on Air Spring Bumpers Mankovits, Tamás ; Kocsis, Imre ; Szabó, Tamás ; Vámosi, Attila ; Huri, Dávid
19
Wednesday – 10/09/2014 -2
Session: N-05 Numerical Optimization Techniques Room:3
Chair:
Hours ID Speaker Title
10:35-10:55
5578 Singh, Pushpinder
Solving dual hesitant fuzzy assignment problem with restrictions using similarity measure Singh, Pushpinder
10:55-11:15
5633 Schwarz, Colin Real-Time Optimization by Indirect NMPC Methods Schwarz, Colin ; Callies, Rainer ; Szabo, Andrei
11:15-11:35
5637 Abebe, Geletu Coupling analytic approximation with polynomial chaos collocation to tackle non-convex chance constraints in control engineering applications Abebe, Geletu ; Pu, Li
11:35-11:55
5645 Torres-Guardia, Luis Torres Guardia LETG
Multi-Stage Stochastic Distribution Model Torres-Guardia, Luis Torres Guardia LETG; Guillen de Torres, Tania Guillen de Torres TZGT
11:55-12:15
5686 Bauma, Elisabeth
A novel hybrid method for optimal control problems and its application to trajectory optimization in micro manufacturing Bauma, Elisabeth ; Schuster, Thomas
12:15-12:35
5746 Montanher, Tiago M
Global estimation of Hidden Markov models using interval arithmetic Montanher, Tiago M; Mascarenhas, Walter F
Session:MS3-02 MS03 - New Advances in Derivative-Free Optimization Methods for Engineering Optimization
Room:4
Chair: José Aguilar Madeira
Hours ID Speaker Title
10:35-10:55
5530 Carro-Calvo, Leopoldo
Global optimization design for expensive computational simulations in aerodynamics using a novel surrogate model approach: The Intelligent Estimation Search with Sequential Learning (IES-SL). Carro-Calvo, Leopoldo ; Andrés-Pérez, Esther ; Salcedo-Sanz, Sancho ; Martin Burgos, Mario
10:55-11:15
5834 Ayres, José Eduardo A.
A new multimodal hybrid differential evolution applied to parameter estimation in vapor-liquid equilibrium problem Ayres, José Eduardo A.; Domingos, Roberto P.; Platt, Gustavo M.
11:15-11:35
5526 Larson, Jeffrey Multi-start, Model-based Derivative-free Optimization Larson, Jeffrey ; Wild, Stefan
11:35-11:55
5654 Custodio, Ana Luisa
GLODS: Clever Multistart in Directional Direct Search Custodio, Ana Luisa ; Madeira, Jose Aguilar
11:55-12:15
5708 Ambrosio, Jorge
Optimal Railway Vehicle Suspension Design for Improved Running Safety Magalhaes, Hugo; Madeira, José FA; Ambrosio, Jorge ; Pombo, Joao
20
Wednesday – 10/09/2014 - 3
Session: D-10 Design Optimization and Inverse Problems Room:1
Chair:
Hours ID Speaker Title
14:00-14:20
5592 Rodrigues, Simão Santos
Design of after-market wind turbine blade add-ons for noise reduction Rodrigues, Simão Santos; Marta, André Calado
14:20-14:40
5712 Canelas, Alfredo
Inductors optimal design in three-dimensional electromagnetic shaping problems Canelas, Alfredo ; Roche, Jean R
14:40-15:00
5748 Osmar, Osmar Francisco Reis Silva OFRS
Hybrid Optimization Algorithm Applied on Multistage Axial Compressor Performance Calculations with Variable Geometry Osmar, Osmar Francisco Reis Silva OFRS; Tomita, Jesuino takachi Tomita JTT; Bringhenti, Cleverson Bringuenthi CB; Cavalva, Diogo Ferraz cavalca DFC
15:00-15:20
5759 Martins, Gustavo C.
Piezoelectric speaker optimization for hearing aid application through multi-physical FE models Martins, Gustavo C.; Nunes, Paulo R.; Cordioli, Júlio A.
15:20-15:40
5869 Morga, Mariantonietta
Optimal design of Tuned Mass Dampers under non-stationary random ecxitation Morga, Mariantonietta ; Greco, Rita ; Marano, Giuseppe C
15:40-16:00
5913 Khominich, Dmitry
Quest of Optimal Polyurethane Damper Geometry Khominich, Dmitry
Session: I-10 Industrial Applications Room:2
Chair:
Hours ID Speaker Title
14:00-14:20
5368 Sousa, Filipe Topology Optimization Studies on Wing Morphing Compliant Edges Sousa, Filipe ; Lau, Fernando ; Suleman, Afzal
14:20-14:40
5741 Meindlhumer, Martin
Towards a Monolithic Design of Large Aircraft Wing Spoilers using Numerical Topology and Laminate Optimization Meindlhumer, Martin ; Schagerl, Martin ; Fleischmann, Martin
14:40-15:00
5822 Melnikovs, Anatolijs
Robust Shape Optimization of Composite Structure Using Metamodels Janushevskis, Alexander ; Melnikovs, Anatolijs ; Janusevskis, Janis
15:00-15:20
5949 Zur, Sascha Optimization of the DLR SpaceLiner inside the integration environment RCE Zur, Sascha ; Tröltzsch, Anke
15:20-15:40
5951 Pierre, Duysinx
Shape and Topology Optimization of Lightweight Automobile Transmission Components Pierre, Duysinx ; Emmanuel, Tromme ; Geoffrey, Virlez ; Lise, Noel ; Nicolas, Poulet
15:40-16:00
5980 Bobby, Sarah Reliability-Based Topology Optimization for Uncertain Building Systems in Seismic Zones Bobby, Sarah ; Spence, Seymour ; Bernardini, Enrica M. J.; Kareem, Ahsan
21
Wednesday – 10/09/2014 - 3
Session: N-06 Numerical Optimization Techniques Room:3
Chair:
Hours ID Speaker Title
14:00-14:20
5534 Ansola Loyola, Ruben
Results comparison between the SIMP and SERA method for compliant mechanisms design Alonso Gordoa, Cristina ; Ansola Loyola, Ruben ; Vegueria Lopez, Estrella ; Querin, Osvaldo
14:20-14:40
5559 Mrzyglod, Miroslaw W.
The Evolutionary Method For Topology Optimization Of Super-Light Structures Mrzyglod, Miroslaw W.
14:40-15:00
5570 Kwak, Sung Kyu
Simultaneous optimization of loading point and structural topological layouts for the design of loaded frames Kwak, Sung Kyu ; Kim, Suh In ; Ahn, Byungseong ; Han, Sangmin ; Kim, Yoon Young
15:00-15:20
5583 Kim, Suh In Linkage mechanism synthesis by topology optimization Kim, Suh In ; Kang, Seok Won ; Kim, Yoon Young
15:20-15:40
5667 Tajs-Zielinska, Katarzyna
Generating optimal topologies with Cellular Automata based on irregular lattices Bochenek, Bogdan ; Tajs-Zielinska, Katarzyna
15:40-16:00
5379 Yoon, Gil Ho Monolithic FSI analysis approach for stress based topology optimization Yoon, Gil Ho
Session:MS5-03 MS05 - Optimization of Laminated Composite Structures Room:4
Chair:
Hours ID Speaker Title
14:00-14:20
6054 Ferreira, Ana L.
Stacking Sequence Optimization for Fiber-reinforced Flat Panels for stiffness and natural vibration frequency criteria. Ferreira, Ana L.; Almas, Miguel M; Guedes, José M; Rodrigues, Helder C
14:20-14:40
5924 Valido, Anibal Jorge AJ
Optimal Design of Thin-Walled Laminated Beams with Geometrically Nonlinear Behaviour Valido, Anibal Jorge AJ; Barradas Cardoso, João J; Moita, Paulo Jorge PJ
14:40-15:00
5925 Barradas Cardoso, João J
Optimal Design of Composite Laminated Thin-Walled Cross-Section Properties Barradas Cardoso, João J; Valido, Aníbal Jorge AJ; Moita, Paulo Jorge PJ
15:00-15:20
6078 Carvalho, Vitor S.
Viscoelastic material parameter estimation in sandwich structures Carvalho, Vitor S.; Araujo, Aurelio L.; Maia, Nuno M.M.
15:20-15:40
5700 Bagci, Mehmet
Determination of Solid Particle Erosion with Taguchi Optimization Approach of Hybrid Composite Systems Bagci, Mehmet
15:40-16:00
6289 NAIMI, Selmen
A design optimization study of a partially damped sandwich structure NAIMI, Selmen ; ASSAF, Samir ; HAMDI, Mohamed Ali
22
Wednesday – 10/09/2014 - 4
Session: D-11 Design Optimization and Inverse Problems Room:1
Chair:
Hours ID Speaker Title
16:15-16:35
5348 Milewski, Jaroslaw
Methodology for chosing the optimum Seasonal Thermal Energy Storage architecture Milewski, Jaroslaw ; Wolowicz, Marcin ; Bujalski, Wojciech
16:35-16:55
5492 Polak, Elijah On the Use of Min-Max Algorithms in Receding Horizon Control Laws for Harbor Defense Polak, Elijah ; Lee, Seungho ; Walrand, Jean
16:55-17:15
5981 Louis, Gosselin Optimization of heat exchangers under uncertainties Louis, Gosselin ; Julien, Lambert
17:15-17:35
6350 Santos, Moises M.
Application of Logic-Structural Matrix in the Allocation Optimization of Devices in Power Systems Distribution Santos, Moises M.; Abaide, A. R.; Sperandio, M. ; Milke, Tafarel F.
17:35-17:55
5545 Chang, Chih-Jung
Bi-Objective Wind Farm Optimization with Turbine Blade Design under Uncertainty Chang, Chih-Jung ; Chan, Kuei-Yuan
Session: I-11 Industrial Applications Room:2
Chair:
Hours ID Speaker Title
16:15-16:35
5395 Morozov, Valery
Method and system for control of flotation process based on preliminary estimates of ore grade Morozov, Valery ; Zorigt, Ganbaatar ; Lodoy, Delgerbat ; Stoliarov, Valeriy
16:35-16:55
5666 Alvarez-Vazquez, Lino J.
Optimal control in moving domains: An application to eutrophication Alvarez-Vazquez, Lino J.; Fernandez, Francisco J.; Martinez, Aurea
16:55-17:15
5758 Vossen, Georg Optimal Control for Battery Management Systems Vossen, Georg ; Roos, Dirk ; Struck, Alexander
17:15-17:35
5967 Ruiz, Ana B. Efficient Operation of Power Plants: a Multibjective Optimization Study Based on the Auxiliary Services Ruiz, Ana B. ; Luque, Mariano ; Cabello, Jose M. ; Ruiz, Francisco
17:35-17:55
5884 Kripka, Moacir Minimizing the Environmental Impact f R-C Structural Elements Kripka, Moacir ; Medeiros, Guilherme ; Fraga, José Luis Fleith de; Marosin, Paulo Roberto Tolotti
23
Wednesday – 10/09/2014 - 4
Session:MS4-02 MS04 - Optimization Methods in Biomechanics and Biomedical Engineering Room:3
Chair:
Hours ID Speaker Title
16:15-16:35
5566 Nikitina, Lialia Local improvement algorithm, nonconvex Pareto fronts and applications Clees, Tanja ; Hornung, Nils ; Nikitin, Igor ; Nikitina, Lialia ; Steffes-lai, Daniela
16:35-16:55
5589 Breen, Alexander Cleveland
A pre-operational study magnification measurement and error estimation of residual tibia kinematics within below knee prosthetics Breen, Alexander Cleveland ; Dupac, Mihai ; Noroozi, Siamak ; Osborne, Neil
16:55-17:15
5853 Ribeiro, Frederico O
The callus formation in bone healing as a shape optimization problem Ribeiro, Frederico O; Fernandes, Paulo R; Folgado, João O; Gómez-Benito, Maria José ; García-Aznar, José M
17:15-17:35
5921 Moita, Paulo J P
Limiting Performance Analysis of a Vehicle?s Restraint System Including Pre-Acting Control Moita, Paulo J P; Cardoso, João E B; Valido, Aníbal J J
17:35-17:55
5975 Ribeiro, Nelson S.
Parametric Optimization of Coronary stents based on Finite Element Models Ribeiro, Nelson S.; Folgado, João O.; Rodrigues, Hélder C.
Session:MS2-02 MS02 - Optimization in Oil and Gas Industries Room:4
Chair:
Hours ID Speaker Title
16:15-16:35
5733 Siregar, Septoratno
Pressure Distribution Determination in a Complex Gas Pipeline Network Siregar, Septoratno ; Soewono, Edy ; Sidarto, Kuntjoro
16:35-16:55
5994 Órfão, Nuno Scheduling of Branched Multi-Product Pipelines Órfão, Nuno ; Relvas, Susana ; Barbosa-Póvoa, Ana Paula
16:55-17:15
6025 Tapia, Marta Optimized Ballast Control in Load-out Operations Tapia, Marta ; Kaleff, Peter ; Garcia, Sandra ; Rodriguez, Juan
17:15-17:35
6048 Soletti, João Inácio
Helicopter routing problem applied to offshore platforms Soletti, João Inácio ; Carvalho, Sandra Helena Vieira ; Sousa, Carla Jaciara; Oliveira Júnior, Antônio Martins
17:35-17:55
5554 Romero, David G
Determining Optimal Routes To Traverse Block Sets Romero, David G; Gaona, Silvia M; Rojano, Miguel A
24
Wednesday – 10/09/2014
Session:Poster Room:
Chair:
Hours ID Speaker Title
10:20-17:55
5701 Karaskova, Adela
Use of genetic algorithms for spare parts distribution system Rybickova, Alena ; Karaskova, Adela ; Mockova, Denisa
10:20-17:55
5824 Carmo, Shirlene Kelly Santos
Modeling and Analysis of Control in One Unit Compression Chlorine Carmo, Shirlene Kelly Santos; Vasconcelos, Luis Gonzaga Sales; Emerenciano, Mariângela Da Silva Araújo
10:20-17:55
5522 Ruiz-Molina, Juan Carlos
A Widely Linear System for Quaternion Estimation Ruiz-Molina, Juan Carlos; Navarro-Moreno, Jesus ; Fernandez-Alcala, Rosa Maria
10:20-17:55
5641 Brigadnov, Igor A.
Minimization of Nonsmooth Functions in the Limit Analysis Problem of Electrostatics Brigadnov, Igor A.; Fedotova, Ekaterina M.
10:20-17:55
6002 Q., Catharine Q.
Artificial Neural Networks Structure Selection: The benefits of Cross Validation Method N., idelfonso B.; Q., Catharine Q.; P., Karen V.
10:20-17:55
6030 Albayrak, Gülça
Optimization of the Ready-Mixed Concrete Delivery System Using Transportation Algorithm Albayrak, Gülça ; Albayrak, Ugur
10:20-17:55
6057 Coelho, Helena
FAIPA_MAT and FAIPA_SCI: A Library for Non Linear Constrained Optimization in Matlab and Scilab Coelho, Helena; Herskovits, José
10:20-17:55
5381 Kobelev, Vladimir V.
PARETO and NASH fronts as the limit case of the isoperimetric inequality in multiobjective optimization theory Kobelev, Vladimir V.
10:20-17:55
5490 Messager, Tanguy
Practical interest of "anti-optimal" solutions in optimal structural design Messager, Tanguy ; Pyrz, Mariusz
10:20-17:55
5536 Park, Hyo Seon
Performance Based Optimal Seismic Retrofit Technique for pre-Northridge Steel Moment Frames by Using Genetic Algorithm Oh, Byung Kwan ; Choi, Se Woon ; Kim, Yousok ; Park, Hyo Seon
10:20-17:55
5572 Tabbuso, Pietro
Comparison between unrestricted dynamic shakedown design and a new probabilistic approach for structures under seismic loadings Palizzolo, Luigi ; Benfratello, Salvatore ; Tabbuso, Pietro
10:20-17:55
5699 Carvalheira, Pedro de F. V.
Design Optimization of the Centrifugal Clutch of the M3165 Four-Stroke Internal Combustion Engine Carvalheira, Pedro de F. V.
10:20-17:55
5728 Nakao, Atsuyuki
Development of an adaptive experimental design method based on probabilities to achieve requirements and quantity of information on next experiments Nakao, Atsuyuki ; Kaneko, Hiromasa ; Funatsu, Kimito
10:20-17:55
5936 Zambolini-Vicente, Bruno G. G. L.
Optimization of Multimodal Circuits for the Passive Control of Vibrations of Composites Structures Silva, Victor A. C. ; Zambolini-Vicente, Bruno G. G. L.; de Lima, Antônio M. G.
10:20-17:55
5621 Oclon, Pawel The Performance Optimization of the High Temperature Fin And Tube Heat Exchanger Using the Continous Genetic Algorithm. Oclon, Pawel ; Lopata, Stanislaw ; Weglowski, Bohdan ; Pilarczyk, Marcin
10:20-17:55
5692 Taler, Jan Inverse procedure for determining transient fluid temperature based on temperature responses of the thermometer and pipeline wall Taler, Jan ; Jaremkiewicz, Magdalena
10:20-17:55
5720 Dawid, Taler Determining heat transfer correlations for transition and turbulent flow in ducts Dawid, Taler
10:20-17:55
5760 Centeno González,
Programming the inverse thermal balance for a bagasse-fired boiler, including the application of a optimization method in MATLAB
25
Session:Poster Room:
Chair:
Hours ID Speaker Title
Felipe O Centeno González, Felipe O; Martínez Reyes, Arnaldo M; Lesme Jaén, René ; Villa Nova, Helcio F; Silva Lora, Electo E; Gonçalvez, Jose L
10:20-17:55
5901 Kocsis, Imre SVM Variants Used in the Investigation of Some Engineering Optimization Problems Kocsis, Imre ; Mankovits, Tamás ; Vámosi, Attila ; Deák, Krisztián
10:20-17:55
5948 Amado, Franco D. R.
Productivity and optimization of the brew production by mash variation Amado, Franco D. R.; Barreto, Vinicius B.; Cruz, Kaiza V.
10:20-17:55
5978 Tovar, Andres Thin-walled component design optimization for crashworthiness using principles of compliant mechanism synthesis and Kriging sequential approximation Liu, Kai ; Tovar, Andres ; Detwiler, Duane
10:20-17:55
6028 Albayrak, Ugur
Assessment of Corrosion and Mechanical Properties of Rebar Used in a 50 Years-Old Reinforced Concrete Industrial Building Canbaz, Mehmet ; Albayrak, Ugur
10:20-17:55
6029 Unluoglu, Esref
Examination of material properties and carbonation of concrete in a 50-year-old structure Canbaz, Mehmet ; Albayrak, Ugur ; Unluoglu, Esref
10:20-17:55
5923 Camponogara, Eduardo
A Mathematical Programming Formulation for Robust Production Optimization of Gas-Lifted Oil Fields Hulse, Eduardo O.; Camponogara, Eduardo
10:20-17:55
5679 Gouveia, Nuno D.
A Minimization Procedure for the Determination of SFRC Tensile Behaviour Gouveia, Nuno D.; Faria, Duarte M. V.; Ramos, António M. P; Custódio, Ana L.
10:20-17:55
6013 Hernandes, Jose Antonio
Laminate Stacking Sequence Optimization with Response Surface Based on the RQA Hernandes, Jose Antonio; Leite Lemos, Vinicius; Moreto Massoca, Alexandre
10:20-17:55
5986 Michal, Cialkowski
Regularization of an inverse problem by imposing the stiffness on the graphs of its solutions Michal, Cialkowski ; Nikolai, Botkin ; Jan, Kolodziej ; Andrzej, Frackowiak ; Andrzej, Mackiewicz ; Agnieszka, Wroblewska
10:20-17:55
5977 Ahani, Parisa A novel approach for optimal integration of small electric vehicles with diesels vans in urban freight transport Ahani, Parisa ; Farias, Tiago ; Melo, Sandra
10:20-17:55
5991 Regis, Rommel G
An Adaptive and Locally-Biased Optimization Method Using Kriging Metamodels Regis, Rommel G
10:20-17:55
5996 Montañez-Barragán, Brenda
Optimization of Extraction of Phenolic Compounds In Cactus Pear (Opuntia Ficus-Indica) Waste Cladodes using Box-Behnken Design of Experiments Mirón-Mérida, Vicente ; Montañez-Barragán, Brenda ; Barragán-Huerta, Blanca E
10:20-17:55
5590 Kobelev, Vladimir
Topological derivatives for fundamental frequencies of elastic bodies Kobelev, Vladimir
10:20-17:55
5805 Ribeiro Costa, Victor Thauan
Reaeration Coefficient Sensitivity Analysis For Water Quality River Modelling Ribeiro Costa, Victor Thauan; Lugon Junior, Jader; Watts Rodrigues, Pedro Paulo
26
Thursday – 11/09/2014 - 1
Session: D-12 Design Optimization and Inverse Problems Room:1
Chair:
Hours ID Speaker Title
08:40-09:00
5418 Parra-Guevara, David
Existence and uniqueness of the regularized solution in the problem of recovery the non-steady emission rate of a point source: Application of the adjoint method. Parra-Guevara, David ; Skiba, Yuri ; Reyes-Romero, Arturo
09:00-09:20
5943 Wang, Qi Optimal pitching axis of flapping-wings for hovering flight Wang, Qi ; Goosen, Johannes ;van Keulen, Fred
09:20-09:40
5776 Pinter, Janos D
Global vs. Local Optimization for Parameter Estimation in Engineering Models Pinter, Janos D; Satish, Mysore G..
09:40-10:00
5781 Liang, Chen A Copula-sampling Approach to Multi-objective Optimization under Uncertainty Liang, Chen ; Mahadevan, Sankaran
10:00-10:20
5687 Abderrahmane, Habbal
A Nash game approach to solve elliptic data completion problems Abderrahmane, Habbal ; Moez, Kallel
Session: I-12 Industrial Applications Room:2
Chair:
Hours ID Speaker Title
08:40-09:00
5616 Ciancio, Claudio
Temperature Prediction in High Speed Incremental Forming Process by Data Mining Technique Ambrogio, Giuseppina ; Ciancio, Claudio ; Filice, Luigi ; Gagliardi, Francesco ; Musmanno, Roberto
09:00-09:20
5893 Jin, Kai Residual stress and distortion after ejection for injection molded part with metal-insert by the process chain analysis Jin, Kai ; Jeong, Taesan ; Kim, Naksoo
09:20-09:40
5896 Kim, Taesan Numerical analysis and optimal design to reduce residual stresses and deformations of die casting sheets after ejection Kim, Taesan ; Jin, Kai ; An, Teagen ; Kim, Naksoo
09:40-10:00
5959 Campos, Hugo RC
On the optimization and accuracy of stress-strain curve determination using hydraulic bulge test Campos, Hugo RC; Santos, Abel D; Martins, Bruno ; Barlat, F.
10:00-10:20
5565 Nikitin, Igor Extrapolation check for metamodel-driven optimization Clees, Tanja ; Hüttemann, Martin ; Nikitin, Igor ; Nikitina, Lialia ; Steffes-lai, Daniela
27
Thursday – 11/09/2014 -1
Session:MS4-03 MS04 - Optimization Methods in Biomechanics and Biomedical Engineering Room:3
Chair:
Hours ID Speaker Title
08:40-09:00
5796 Quental, Carlos
Optimal approach to the human motion reconstruction within the limitation of the kinematic data acquisition procedures Quental, Carlos ; Folgado, João ; Ambrósio, Jorge ; Monteiro, Jacinto
09:00-09:20
5942 Silva, Maria Elisabete T.
Optimization of the Mooney-Rivlin constitutive model parameters for the pelvic floor muscles, using an Inverse Method Silva, Maria Elisabete T.; Parente, Marco P.L.; Natal, Renato M.J.; Mascarenhas, Teresa
09:20-09:40
5995 Rodrigues , Carlos M.B.
Human optimization of lower limb muscle stretch shortening cycle Rodrigues , Carlos M.B.; Correia, Miguel V.; Abrantes, João M.C.S.; Nadal, Jurandir
Session: DE-01 Design Optimization …/ Efficient Analysis… Room:4
Chair:
Hours ID Speaker Title
08:40-09:00
6055 Matos, Agostinho M
Optimization computational model for piezoelectric energy harvesters considering material piezoelectric microstructure Matos, Agostinho M; Guedes, Jose M; Jayachandran, Kuzhichalil P; Rodrigues, Helder C
09:00-09:20
5486 Miranda, Sofia I
Superquantile Regression with Applications to Buffered Reliability, Uncertainty Quantification, and Conditional Value-at-Risk Rockafellar, R Tyrrell; Royset, Johannes O; Miranda, Sofia I
09:20-09:40
5938 L.F.P., Etman Specifying decomposition structure in large-scale MDO: revision of the Psi language using a LED lighting design case T., Wilschut ; A.T., Hofkamp ; L.F.P., Etman ; J.E., Rooda ; A.W.J., Gielen
09:40-10:00
5835 Domingos, Roberto Pinheiro
A Multimodal Differential Evolutionary Applied to Robotic Navigation Problem Domingos, Roberto Pinheiro; Ayres, José Eduardo Almeida ; Platt, Gustavo Mendes; Neto, Francisco D. M.
10:00-10:20
5591 Yilmaz, Serhat A Proposed Annex Architecture for Enhancing Extrapolation Performance of MLP Neural Networks Yilmaz, Serhat ; Ekinci, Onder
28
Thursday – 11/09/2014 - 2
Session: D-13 Design Optimization and Inverse Problems Room:1
Chair:
Hours ID Speaker Title
10:35-10:55
5558 Rawdon, Blaine Knight
Design Optimization of the Gossamer Condor and Gossamer Albatross Human-Powered Airplanes Rawdon, Blaine Knight
10:55-11:15
5614 Afonso, Frederico
Multidisciplinary Performance Based Optimization of Aircraft Afonso, Frederico ; Vale, José ; Lau, Fernando ; Suleman, Afzal
11:15-11:35
5623 Vale, José Lobo
Stochastic Optimization in Aircraft Design Amândio, Luis Filipe ; Marta, André Calado; Suleman, Afzal ; Afonso, Frederico José; Vale, José Lobo
11:35-11:55
5702 Burton, Scott A
Air Vehicle Design Optimization using a Multi-Fidelity Model in the Service-Oriented Computing Environment (SORCER) Burton, Scott A
11:55-12:15
5868 Padulo, Mattia A Risk-based Approach to Aircraft Design Optimization Padulo, Mattia ; Delbove, Julien
12:15-12:35
5916 Vale, José L. Performance Based MDO of a Regional Transport Aircraft with a Joined Wing Configuration Vale, José L.; Afonso, Frederico ; Lau, Fernando ; Suleman, Afzal
Session: I-13 Industrial Applications Room:2
Chair:
Hours ID Speaker Title
10:35-10:55
5773 Silva, Marlon da
Optimization Methods Applied to Nonlinear Signal Interference Models Silva, Marlon da; Senne, Edson Luiz França; Vijaykumar, Nandamudi Lankalapalli
10:55-11:15
5792 Zietarski, Stanislaw
The Combinatorial-Cyclic Method of Optimization (CCOpt) in a virtual and, scaled or full sized, physical prototyping Zietarski, Stanislaw ; Kachel, Stanislaw ; Kozakiewicz, Adam ; Wrzesien, Stanislaw
11:15-11:35
6000 Vasconcelos, Angela Lucínia Urtiga
Study of the dynamic behavior and development of the optimal procedure of startup a thermally coupled distillation column Vasconcelos, Angela Lucínia Urtiga
11:35-11:55
6004 Q., Catharine Q.
Modeling and Optimization of a Distillation Column using Advanced Optimization Software (ROMeo®) Q., Catharine Q.; P., Karen V.; N., idelfonso B.
11:55-12:15
6005 Dias, Joao P Evolutionary Multiobjective Optimization of Multibody Systems with Application to Vehicle Structures under Impact Dias, Joao P; Francisco, Paulo R
12:15-12:35
5644 Alghamdi, Saeid A
Durability-Based Design-Optimization of RC Beams and Columns in Corrosive Environments Alghamdi, Saeid A
29
Thursday – 11/09/2014 -2
Session: N-07 Numerical Optimization Techniques Room:3
Chair:
Hours ID Speaker Title
10:35-10:55
5465 Kaneko, Hiromasa
Fast optimization of hyperparameters of support vector regression model considering its predictive ability Kaneko, Hiromasa ; Funatsu, Kimito
10:55-11:15
5579 Kuckoski, Adriano
Structural Optimization of Frame Structures by Integer Programming with Failure Constrains Kuckoski, Adriano ; Fonseca, Jun
11:15-11:35
5636 Ergünes, Biket Interval Partitioning Methods for Mixed Integer Nonlinear Problems Ergüne?, Biket ; Ozdamar, Linet ; Demir, Onur ; Gülcan, Nur
11:35-11:55
5683 Mohamed Amine, Bouhlel
Kriging combining Partial Least Squares for optimization in high dimension Mohamed Amine, Bouhlel ; Nathalie, Bartoli ; Morlier, Joseph ; Otsmane, Abdelkader
11:55-12:15
5689 Miranda, Joao A One-Step Discrete Adjoint-Based Approach for Combined Design Optimization and A Posteriori Error Estimation Miranda, Joao ; Elsayed, Khairy ; Lacor, Chris ; Abraham, Simon
12:15-12:35
5804 da Silva Junior, C. A.
A metric to assist the selection of the particle swarm optimization parameters da Silva Junior, C. A. ; Saba, W. B. ; Abe, N. M. ; Passaro, A.
Session: Room:4
Chair:
Hours ID Speaker Title
30
Thursday – 11/09/2014 - 3
Session: D-14 Design Optimization and Inverse Problems Room:1
Chair:
Hours ID Speaker Title
14:00-14:20
5552 Siegbert, Roland
Development of an Objective Function for Die-Swell in Extrusion Die Design Siegbert, Roland ; Elgeti, Stefanie ; Behr, Marek
14:20-14:40
5703 Reith, Dirk New ethylene oxide force fields via global and local optimization Krämer, Andreas ; Hülsmann, Marco ; Köddermann, Thorsten ; Reith, Dirk
14:40-15:00
5737 Pascu, Adrian Simulation of polymeric membrane in ASPEN Plus for CO2 post-combustion capture Pascu, Adrian ; Badea, Adrian ; Dinca, Cristian ; Stoica, Laurentiu
15:00-15:20
5882 Xu, Yunchao Theoretical Analyses in the Influence of Heat and Mass Transfer on the Conversion Rate of Methanol Decomposition Xu, Yunchao ; Chen, Qun
15:20-15:40
5738 Stoica, Laurentiu
Absorber design for improving the CO2 post-combustion capture efficiency Stoica, Laurentiu ; Badea, Adrian ; Dinca, Cristian ; Pascu, Adrian
15:40-16:00
5883 Wang, Yifei Experimental Studies of Central Variable Water Volume Chiller System Optimization for Energy Conservation Wang, Yifei ; Chen, Qun
Session: I-14 Industrial Applications Room:2
Chair:
Hours ID Speaker Title
14:00-14:20
5800 Albino, Larissa LAS
Tactical Decision Model for Emergency Response for Oil Spills on The Sea Albino, Larissa LAS; Tapia, Lucio LUC
14:20-14:40
5615 Derbala, Ali - A "2-Jobshop and one conveyor" scheduling problem Bouali, Abdenacer -; Derbala, Ali -; Bouiche, Abdelhak -
14:40-15:00
5519 Jayachandran, K P
Simultaneous optimization of orientation and concentration in piezoelectric composites Jayachandran, K P; Guedes, J M; Rodrigues, H C
15:00-15:20
5983 Badawy, Rashad
Quantum-Inspired Evolution for Smart Building Energy Management in Future Power Networks Badawy, Rashad ; Yassine, Abdulsalam ; Heßler, Axel ; Hirsch, Benjamin ; Albayrak, Sahin
15:20-15:40
6006 Maia, Ivana Márcia Oliveira
Experimental Methodology for Quantification Analysis of Methane Emission Applied to the Charcoal Production in Laboratory Maia, Ivana Márcia Oliveira; Rodrigues de Carvalho, Solidônio; Borges, Valério Luiz; Pereira de Lima, Euclides Antonio; Mota, Rogério Lima ; Barbosa, Livia Domingos
31
Thursday – 11/09/2014 - 3
Session: N-08 Numerical Optimization Techniques Room:3
Chair:
Hours ID Speaker Title
14:00-14:20
5721 Ishibashi, Ken Application of Cellular Automaton to Combinatorial Optimization Problems Ishibashi, Ken ; Furuta, Hitoshi ; Nomura, Yasutoshi ; Nakatsu, Koichiro ; Takahashi, Kyosuke
14:20-14:40
5747 Phan, An Thanh
Method of orienting curves for determining Delaunay triangulations Phan, An Thanh ; Dinh, Giang Thanh; Le, Trang Hong
14:40-15:00
6014 Ginho, Jorge Cipriano Fernandes dos Santos JCFS
A New Draft of Resolution to the P-Median Problem Ginho, Jorge Cipriano Fernandes dos Santos JCFS
15:00-15:20
5873 Dolatshah, Azam
Investigation of energy dissipation over stepped spillways using a hybrid FV - ANN technique Dolatshah, Azam ; Imani Khoshkho, Hasan ; Mashal, Mahmoud
15:20-15:40
5485 Mazorche, Sandro R
Solving a problem of elastic-plastic torsion as complementarity Mixed Mazorche, Sandro R
15:40-16:00
5628 Brigadnov, Igor A.
Regularization of Non-Convex Plastic Boundary Value Problems Brigadnov, Igor A.
Session: Room:4
Chair:
Hours ID Speaker Title
32
Thursday – 11/09/2014 - 4
Session: D-15 Design Optimization and Inverse Problems Room:1
Chair:
Hours ID Speaker Title
16:15-16:35
5833 Martins, Joaquim R. R. A.
Aircraft Wing Design via High-Fidelity Aerostructural Optimization Martins, Joaquim R. R. A.
16:35-16:55
5752 Christiansen, Rasmus E
Benefits and Challenges when Performing Robust Topology Optimization for Interior Acoustic Problems Christiansen, Rasmus E; Jensen, Jakob S; Lazarov, Boyan S; Sigmund, Ole
16:55-17:15
5462 Nastase, Adriana
Influence of Start Values of Optimization Over the Global Optimized Shapes of Flying Configurations Nastase, Adriana
17:15-17:35
5806 Werner, Michael
Unified Suspension Optimization Process Considering Robustness Hahn, Youngwon ; Cofer, Jack ; Choi, Yangwook ; Werner, Michael
17:35-17:55
5607 Optimal Shape Design of a Cross-Slot Device Using NURBS Parameterization Heibati, Masoumeh ; A.Alves, Manuel ; S.N.Oliveira, Mónica
Session: I-15 Industrial Applications Room:2
Chair:
Hours ID Speaker Title
16:15-16:35
5611 Musial, Jedrzej
Online Goods Brokering Musial, Jedrzej
16:35-16:55
5832 Bautzer, Claudio C.G.S.B,S
Thermo-Structural Analysis of the Separation System of Satellite Launcher Vehicle Payload for Aluminium and Steel Bautzer, Claudio C.G.S.B,S; Machado, Humberto H.A. M
16:55-17:15
5952 Grilo, Teresa TG
Optimal control of passive particles advected by two-dimensional point vortices Grilo, Teresa TG; Lobo Pereira, Fernando FLP; Gama, Sílvio SG
17:15-17:35
5973 Ahani, Parisa A new approach for optimizing economic load dispatch problem with valve-point effects Ahani, Parisa
17:35-17:55
5999 Montañez-Barragán, Brenda
Optimization of Bioactive Compounds Extraction from Coffee Waste Using Box-Behnken Experimental Design Mirón-Mérida, Vicente ; Montañez-Barragán, Brenda ; Barragán-Huerta, Blanca E
33
Thursday – 11/09/2014 - 4
Session: N-09 Numerical Optimization Techniques Room:3
Chair:
Hours ID Speaker Title
16:15-16:35
5550 Ribau, João P. Optimization of Financial Savings and Life Cycle CO2 emissions of Hybrid Bus Powertrains Considering the Energy Management Strategy and Design Ribau, João P.; Silva, Carla M.; Sousa, João M.
16:35-16:55
5584 Yang, Songlin Comprehensive optimization of the ship performance for USV and its methods Yang, Songlin; Zhang, Yu Gong; Wen, Yan Yi
16:55-17:15
5827 Platt, Gustavo M
Application of the Flower Pollination Algorithm in Nonlinear Algebraic Systems with Multiple Solutions Platt, Gustavo M
17:15-17:35
5677 Soleymani Shishvan, Masoud
Long Term Production Planning of Open Pit Mines by Ant Colony Optimization Soleymani Shishvan, Masoud ; Sattarvand, Javad
17:35-17:55
5840 Yavuz, Mehmet
Istanbul Stock Exchange (Bist) Index Prediction With Neural Networks During The Financial Crises Yavuz, Mehmet ; Sakarya, Sakir ; Karaoglan, Aslan Deniz ; Ozdemir, Necati
Session: Room:4
Chair:
Hours ID Speaker Title