WATER AND SANITATION AGENCY
ENLISTMENT FORM
FOR
WATER METER
MANUFACTURERS / SOLE AGENTS / AUTHORIZED DEALERS
DIRECTORATE OF PROCUREMENT & STORES 59-F GULSHAN-E-RAVI, LAHORE
NAME OF FIRM:__________________________________________________________________
ADDRESS:_________________________________________________________________________
TELEPHONE NO. OFFICE:________________________________________________________
MOBILE NUMBER:_____________________________________________________________
CHALLAN NO.:____________________________________________________________________
DATED:_____________________________________________________________________________
SIGNATURE OF ISSUANCE AUTHORITY:______________________________________
1. Manufacturers / Sole Agents / Authorized Dealers interested to get themselves registered with the Water & Sanitation Agency (WASA) Lahore should obtain printed application form on payment of Rs. 5000/- by submission of written application from the office of Director Procurement and Stores WASA, Lahore during office hour on any working days.
2. The contractor approved for enlistment shall have to deposit the
enlistment fee for the year 2018-19 within fifteen (15) days receipt of approval letter failing which it would be consider that you are not willing to be enlisted on WASA panel.
3. The applicant shall be enlisted/ registered after evaluation and on approval of application from the committee constituted by Managing Director, WASA for evaluation of enlistment applications.
4. Enlistment fee shall be Rs 50,000.00 (Pak Rupees Fifty Thousand only).
5. The enlistment / renewal/ registration of the firm shall be valid for
one (01) fiscal year.
6. The application for renewal of next fiscal year on submission of application along with all necessary documents on or before 30th June of every year for processing viz approval of renewal.
7. After approval of renewal by the committee payment of
Rs 25,000.00 (Pak Rupees Twenty Five Thousand Only) shall be made through challan form issued by WASA, Lahore
8. Registration Certificate / Letter shall be issued containing terms
and conditions along with approved make and models of water meters (Appendix-L)
9. Certificate for renewal of registration shall be issued on payment of
fee as described above. (Appendix-M)
10. If application for the renewal after due date you will be penalized for 25% of renewal fee per-quarter.
11. All valid / renewed documents / literature / broucher/ technical
specifications / certifications shall be provided with renewal request.
12. All the enlisted Manufacturers / Sole Agents / Authorized Dealers shall have to provide water meters as per notified specifications..
13. The Manufacturers / Sole Agents / Authorized Dealers once approved / enlisted on WASA panel would have to provide water meters in accordance with notified specifications on reasonable market rate.
14. The approved / enlisted Manufacturers / Sole Agents / Authorized
Dealers shall have well established website with product verification / confirmation portal to verify water meter regarding following aspects. Date of Manufacturing Site of Manufacturing / Country of Origin Details of Water Meter concerning type, discharge, class ,dia and
all other relevant information.
15. In case of foreign Manufacturer approved / enlisted on WASA panel, shall have to establish a franchise with equipment / accessories / parts of water meter that would be required for repair of water meter.
16. Inspection of water meters will be carried out at ware house of the firm through the committee constituted by Managing Director, WASA.
17. The approved enlisted / registered firm shall provide all necessary fittings i.e couplings, nuts, bushes, etc. required for installation of Water Meter.
18. The approved enlisted / registered firm shall have a well-established outlet in WASA Lahore jurisdiction easily accessible to WASA Consumers / Customers. A committee shall inspect the outlets regarding services provided by the firm.
19. The approved enlisted / registered firm must maintain a stock of minimum 1000 (One Thousand) water meter at their outlet.
20. The approved enlisted / registered firm shall be bound to provide warranty and after sale services to the consumer / customer. In case of any complaint received from consumer / customer regarding performance, services, availability of water meters, accessories / parts and after sale services WASA Lahore reserves the right to delist the firm from its panel of approved Water Meter Manufacturer / Sole Agents / Authorized Dealers.
21. The approved enlisted / registered firm shall be responsible for third party inspections in respect of following aspects and submit the same to WASA Lahore.
Technical staff of third party shall visit the factory premises of
manufacturing company / supplier in its country.
Examine / technically evaluate water meters keeping in view
notified specifications.
Checking for appropriate handling of water meters.
Validation of quality through visual inspection and testing with
respect to notified specification and identify deviation in any.
Post-shipment inspections in Pakistan at the port of delivery to
certify and validate the items passed during pre-shipment have
been received securely.
APPLICATION (To be filled by the applicant)
1. Manufacturer Sole Agent Authorized Dealer (Shade the Box)
2. Name of Owner / Proprietor / Authorized Representative______________________
3 CNIC:
4. Name of Firm / Company
5. Office Address
6. Email Address 7. Web Address 8. Land Line No. Cell# 9. Firm’s / Company Bank Account No. 10. National Tax No. (N.T.N)
CERTIFY THAT From the best of my knowledge and belief, the above mentioned information is
correct. I understand that in case if I supply any incorrect information to WASA, Lahore
my enlistment would be treated as cancelled and I will be held responsible for the loss
if any incurred to WASA, Lahore. If I make any change in the said information I will
send prompt intimation to the Director Procurement & Stores WASA, Lahore of the
same otherwise my enlistment be treated as cancelled.
Signature_____________________________________________ (Owner / Proprietor / Authorized Representative)
Stamp ________________________________________________
Date__________________________________________
Passport Size Photo
DECLARATION
(To be filled on Judicial Stamp Paper of Rs.100)
Certified that following are the Specimen Signatures of
Mr./Ms.___________________________________________________________________________ who
is Proprietor / Owner / Authorized Representative of Firm/ Company
M/s__________________________________________________________________________________
Signature_____________________________________________ (Owner / Proprietor / Authorized Representative)
Witness No. 1
Signature_______________________
Name____________________________
Address ________________________
Designation____________________
Witness No. 2
Signature_______________________
Name____________________________
Address ________________________
Designation____________________
ENLISTMENT AND REGISTRATION CRITERIA
A. Mandatory Requirements
Mandatory Requirements from serial # 1 to serial # 10 provided in the table below and in all Technical Forms are compulsory. Failure to comply with any of these parameters will result in disqualification of applicant, being ineligible for enlistment.
Sr. No. Documents/Capabilities and Compliance Required Attachment/
Required Documents
1 100% Compliance to the required specifications. Fill out all the relevant Forms for Technical Information of offered meters enclosed in Technical Forms. Attach specific literature/ brochure of product with brand and model number verifying all required specifications (General brochure having partial coverage of the specifications will not be acceptable).Attach Technical information including drawing and performance curve (of the offered model) also
Appendix A
2 Certifications of OEM for the offered model of meters: Compliance certificate of ISO: 4064
(International Organization Standardization) Certificate issued by an authorized body
of OIML: R49 (International Organization for legal Metrology And Certificate issued by an authorized body of MID/2004/22/EEC/AWWA/JWWA
Appendix B
3 Equipment available at Manufacturer’s facility for Quality Assurance / Control Methodology and calibration facility.
Appendix C
4 Documentary proof (certificate of registration as Original Equipment Manufacturer) to the effect that the Applicant is the original Manufacturer of the required Water Meter. In case of Authorized Agent, the Applicant also has to provide documentary proof that its Principal is an Original Manufacturer of the required Water Meters.
Appendix D
5 Certified Evidence of Production per Annum. Appendix E 6 Certified Copy of Audited Accounts for Bidder’s Financial Status in
terms of Average Annual Turnover for last three (03) Years. Appendix F
7 Previous experience of OEM supply of Mechanical Water Meters (Multi-jet Volumetric Rotary Piston/Notating Disc) and Static Water Meter in last 3 years. Attested copies of Supply Order details showing contract amount along with Performance Certificates are to be submitted.
Appendix G
8 Authenticated Copy of Company Human Resource profile including engineering and managerial capability
Appendix H
9 Attach certified copy of NTN & GST or other appropriate authenticity of the similar nature applicable to the applicant in the Country of origin of Goods including all such liabilities.
Appendix I
10 Minimum one (01) year Warranty of offered Goods. Appendix J
Note : In case the applicant is foreign manufacturer they should have registered office established in Pakistan otherwise he will have to apply through authorized dealer / sole agent having well established and registered office in Pakistan.
B. Eligibility Criteria
The firm is required to obtain minimum 60 marks for being eligible concerning / registration / enlistment on WASA panel. In case of Authorized Dealer / Sole Agents following criteria shall be evaluated on documentary proof of OEM.
Sr. No. Required Criteria Maximum
Marks 1 Capacity of production of the goods per annum (No. of water
meters) <25,000 = 5 Marks >25,000and<50,000 = 10 Marks >=50,000 = 20 Marks
20
2 Financial Status Average Annual Turnover for last three (03) Years <0.1 Million USD Or equivalent PKR = 5 Marks >0.1 Million USD Or equivalent PKR &<0.5 Million USD Or equivalent PKR = 15 Marks >0.5 Million USD Or equivalent PKR = 25 Marks
25
3 Supply of Mechanical Water meters (Multi-jet, Volumetric Rotary Piston Notating Disc Disc) and Static Water Meter [Ultrasonic technology, Electromagnetic, Fluidic Oscillation (small meters)] having in last 3 years. Supply Order details showing contract amount and Performance Certificates are to be submitted. <0.1 Million USD Or equivalent PKR = 5 Marks >0.1 Million USD Or equivalent PKR and<0.5 Million USD Or equivalent PKR = 10 Marks >0.5 Million USD Or equivalent PKR and<1 Million USD Or equivalent PKR = 15 Marks >=1 Million USD Or equivalent PKR = 25 Marks
25
4 Equipment / Test Bed available at Manufacturers (OEM) facility for Quality Assurance / Control Methodology / Calibration Facility.
10
5 Company profile including: Managerial Staff Engineering Staff Supervisory Staff Technical Staff Laboratory Staff
10
6 Well established website and availability of product verification portal.
10
Note: In case the applicant is foreign manufacturer they should have registered office established in Pakistan otherwise he will have to apply through authorized dealer / sole agent having well established and registered office in Pakistan.
APPENDIX-A
Technical Information of Offered Meter(s)
[The Applicants are required to attach:
1. Technical information including drawing and performance curve of the offered meters.
2. Attach specific literature/ brochure of product with brand and model number verifying all required specifications (General brochure having partial coverage of the specifications will not be acceptable).]
TECHNICAL FORM A-1 (a)
TECHNICAL SPECIFICATIONS OF OFFICERED METERS
Water Meter Type: Volumetric Rotary Piston DN (15 mm)
Country of Origin:___________________________ Brand Name_____________ Model No:__________
Properties of water Meters Comply /Non-Comply Remarks
GENERAL FEATURES:
Possibility for both visual & Automated Meter Reading (AMR) outputs
Tamper proof Provided with non-return valve Un-affected by grit and particulates Provided with wire and lead seal Not effected by Magnetic field.
CERTIFICATIONS:
ISO 4064 (International Organization Standardization) Complaint
OIML: R49(International Organization for Legal Metrology)
MID/2004/22/EEC/AWWA/JWWA
DETAIL OF METROLOGICAL SPECIFICATIONS:
Size (15mm) Accuracy: Class II Material : Bras/Non-ferrous metal Protection Class: IP-68 Ambient Temperature: +5 to 55°C Liquid Temperature: Up to 50°C Maximum Working Pressure =16Bars Flow rate: Q3/Q1 = 160 Maximum Flow rate (Q3) : 2.5m3/ hr
INSTALLATION:
Any Direction
TECHNICAL FORM A-1 (b)
TECHNICAL SPECIFICATIONS OF OFFICERED METERS
Water Meter Type: Volumetric Rotary Piston DN (20 mm)
Country of Origin:___________________________ Brand Name_____________ Model No:__________
Properties of water Meters Comply /Non-Comply Remarks
GENERAL FEATURES:
Possibility for both visual & Automated Meter Reading (AMR) outputs
Tamper proof Provided with non-return valve Un-affected by grit and particulates Provided with wire and lead seal Not effected by Magnetic field.
CERTIFICATIONS:
ISO 4064 (International Organization Standardization) Complaint
OIML: R49(International Organization for Legal Metrology)
MID/2004/22/EEC/AWWA/JWWA
DETAIL OF METROLOGICAL SPECIFICATIONS:
Size (20mm) Accuracy: Class II Material : Bras/Non-ferrous metal Protection Class: IP-68 Ambient Temperature: +5 to 55°C Liquid Temperature: Up to 50°C Maximum Working Pressure =16Bars Flow rate: Q3/Q1 = 160 Maximum Flow rate (Q3) : 4.0m3/ hr
INSTALLATION:
Any Direction
TECHNICAL FORM A-1 (c)
TECHNICAL SPECIFICATIONS OF OFFICERED METERS
Water Meter Type: Volumetric Rotary Piston DN (25 mm)
Country of Origin:___________________________ Brand Name_____________ Model No:__________
Properties of water Meters Comply /Non-Comply Remarks
GENERAL FEATURES:
Possibility for both visual & Automated Meter Reading (AMR) outputs
Tamper proof Provided with non-return valve Un-affected by grit and particulates Provided with wire and lead seal Not effected by Magnetic field.
CERTIFICATIONS:
ISO 4064 (International Organization Standardization) Complaint
OIML: R49(International Organization for Legal Metrology)
MID/2004/22/EEC/AWWA/JWWA
DETAIL OF METROLOGICAL SPECIFICATIONS:
Size (25mm) Accuracy: Class II Material : Bras/Non-ferrous metal Protection Class: IP-68 Ambient Temperature: +5 to 55°C Liquid Temperature: Up to 50°C Maximum Working Pressure =16Bars Flow rate: Q3/Q1 = 160 Maximum Flow rate (Q3) : 6.3m3/ hr
INSTALLATION:
Any Direction
TECHNICAL FORM A-2 (a)
TECHNICAL SPECIFICATIONS OF OFFICERED METERS
Water Meter Type: Notating Disc DN (15 mm)
Country of Origin:___________________________ Brand Name_____________ Model No:__________
Properties of water Meters Comply /Non-Comply Remarks
GENERAL FEATURES:
Possibility for both visual & Automated Meter Reading (AMR) outputs
Tamper proof Provided with non-return valve Un-affected by grit and particulates Provided with wire and lead seal Not effected by Magnetic field.
CERTIFICATIONS:
ISO 4064 (International Organization Standardization) Complaint
OIML: R49(International Organization for Legal Metrology)
MID/2004/22/EEC/AWWA/JWWA
DETAIL OF METROLOGICAL SPECIFICATIONS:
Size (15mm) Accuracy: Class II Material : Bras/Non-ferrous metal Protection Class: IP-68 Ambient Temperature: +5 to 55°C Liquid Temperature: Up to 50°C Maximum Working Pressure =16Bars Flow rate: Q3/Q1 = 160 Maximum Flow rate (Q3) : 2.5m3/ hr
INSTALLATION:
Any Direction
TECHNICAL FORM A-2 (b)
TECHNICAL SPECIFICATIONS OF OFFICERED METERS
Water Meter Type: Notating Disc DN (20 mm)
Country of Origin:___________________________ Brand Name_____________ Model No:__________
Properties of water Meters Comply /Non-Comply Remarks
GENERAL FEATURES:
Possibility for both visual & Automated Meter Reading (AMR) outputs
Tamper proof Provided with non-return valve Un-affected by grit and particulates Provided with wire and lead seal Not effected by Magnetic field.
CERTIFICATIONS:
ISO 4064 (International Organization Standardization) Complaint
OIML: R49(International Organization for Legal Metrology)
MID/2004/22/EEC/AWWA/JWWA
DETAIL OF METROLOGICAL SPECIFICATIONS:
Size (20mm) Accuracy: Class II Material : Bras/Non-ferrous metal Protection Class: IP-68 Ambient Temperature: +5 to 55°C Liquid Temperature: Up to 50°C Maximum Working Pressure =16Bars Flow rate: Q3/Q1 = 160 Maximum Flow rate (Q3) : 4.0m3/ hr
INSTALLATION:
Any Direction
TECHNICAL FORM A-2 (c)
TECHNICAL SPECIFICATIONS OF OFFICERED METERS
Water Meter Type: Notating Disc DN (25 mm)
Country of Origin:___________________________ Brand Name_____________ Model No:__________
Properties of water Meters Comply /Non-Comply Remarks
GENERAL FEATURES:
Possibility for both visual & Automated Meter Reading (AMR) outputs
Tamper proof Provided with non-return valve Un-affected by grit and particulates Provided with wire and lead seal Not effected by Magnetic field.
CERTIFICATIONS:
ISO 4064 (International Organization Standardization) Complaint
OIML: R49(International Organization for Legal Metrology)
MID/2004/22/EEC/AWWA/JWWA
DETAIL OF METROLOGICAL SPECIFICATIONS:
Size (25mm) Accuracy: Class II Material : Bras/Non-ferrous metal Protection Class: IP-68 Ambient Temperature: +5 to 55°C Liquid Temperature: Up to 50°C Maximum Working Pressure =16Bars Flow rate: Q3/Q1 = 160 Maximum Flow rate (Q3) : 6.3m3/ hr
INSTALLATION:
Any Direction
TECHNICAL FORM A-3 (a)
TECHNICAL SPECIFICATIONS OF OFFICERED METERS
Water Meter Type: Multi-Jet Wet Dial DN (15 mm)
Country of Origin:___________________________ Brand Name_____________ Model No:__________
Properties of water Meters Comply /Non-Comply Remarks
GENERAL FEATURES:
Possibility for both visual & Automated Meter Reading (AMR) outputs
Tamper proof Provided with non-return valve Un-affected by grit and particulates Provided with wire and lead seal Not effected by Magnetic field.
CERTIFICATIONS:
ISO 4064 (International Organization Standardization) Complaint
OIML: R49(International Organization for Legal Metrology)
MID/2004/22/EEC/AWWA/JWWA
DETAIL OF METROLOGICAL SPECIFICATIONS:
Size (15mm) Accuracy: Class II Material : Bras/Non-ferrous metal Protection Class: IP-68 Ambient Temperature: +5 to 55°C Liquid Temperature: Up to 50°C Maximum Working Pressure =16Bars Flow rate: Q3/Q1 = 160 Maximum Flow rate (Q3) : 2.5m3/ hr
INSTALLATION:
Horizontal
TECHNICAL FORM A-3 (b)
TECHNICAL SPECIFICATIONS OF OFFICERED METERS
Water Meter Type: Multi-Jet Wet Dial DN (20 mm)
Country of Origin:___________________________ Brand Name_____________ Model No:__________
Properties of water Meters Comply /Non-Comply Remarks
GENERAL FEATURES:
Possibility for both visual & Automated Meter Reading (AMR) outputs
Tamper proof Provided with non-return valve Un-affected by grit and particulates Provided with wire and lead seal Not effected by Magnetic field.
CERTIFICATIONS:
ISO 4064 (International Organization Standardization) Complaint
OIML: R49(International Organization for Legal Metrology)
MID/2004/22/EEC/AWWA/JWWA
DETAIL OF METROLOGICAL SPECIFICATIONS:
Size (20mm) Accuracy: Class II Material : Bras/Non-ferrous metal Protection Class: IP-68 Ambient Temperature: +5 to 55°C Liquid Temperature: Up to 50°C Maximum Working Pressure =16Bars Flow rate: Q3/Q1 = 160 Maximum Flow rate (Q3) : 4.0m3/ hr
INSTALLATION:
Horizontal
TECHNICAL FORM A-3 (c)
TECHNICAL SPECIFICATIONS OF OFFICERED METERS
Water Meter Type: Multi-Jet Wet Dial DN (25 mm)
Country of Origin:___________________________ Brand Name_____________ Model No:__________
Properties of water Meters Comply /Non-Comply Remarks
GENERAL FEATURES:
Possibility for both visual & Automated Meter Reading (AMR) outputs
Tamper proof Provided with non-return valve Un-affected by grit and particulates Provided with wire and lead seal Not effected by Magnetic field.
CERTIFICATIONS:
ISO 4064 (International Organization Standardization) Complaint
OIML: R49(International Organization for Legal Metrology)
MID/2004/22/EEC/AWWA/JWWA
DETAIL OF METROLOGICAL SPECIFICATIONS:
Size (25mm) Accuracy: Class II Material : Bras/Non-ferrous metal Protection Class: IP-68 Ambient Temperature: +5 to 55°C Liquid Temperature: Up to 50°C Maximum Working Pressure =16Bars Flow rate: Q3/Q1 = 160 Maximum Flow rate (Q3) : 6.3m3/ hr
INSTALLATION:
Horizontal
TECHNICAL FORM A-4 (a)
TECHNICAL SPECIFICATIONS OF OFFICERED METERS
Water Meter Type: Multi-Jet Semi Dry Dial DN (15 mm)
Country of Origin:___________________________ Brand Name_____________ Model No:__________
Properties of water Meters Comply /Non-Comply Remarks
GENERAL FEATURES:
Possibility for both visual & Automated Meter Reading (AMR) outputs
Tamper proof Provided with non-return valve Un-affected by grit and particulates Provided with wire and lead seal Not effected by Magnetic field.
CERTIFICATIONS:
ISO 4064 (International Organization Standardization) Complaint
OIML: R49(International Organization for Legal Metrology)
MID/2004/22/EEC/AWWA/JWWA
DETAIL OF METROLOGICAL SPECIFICATIONS:
Size (15mm) Accuracy: Class II Material : Bras/Non-ferrous metal Protection Class: IP-68 Ambient Temperature: +5 to 55°C Liquid Temperature: Up to 50°C Maximum Working Pressure =16Bars Flow rate: Q3/Q1 = 160 Maximum Flow rate (Q3) : 2.5m3/ hr
INSTALLATION:
Horizontal
TECHNICAL FORM A-4 (b)
TECHNICAL SPECIFICATIONS OF OFFICERED METERS
Water Meter Type: Multi-Jet Semi Dry Dial DN (20 mm)
Country of Origin:___________________________ Brand Name_____________ Model No:__________
Properties of water Meters Comply /Non-Comply Remarks
GENERAL FEATURES:
Possibility for both visual & Automated Meter Reading (AMR) outputs
Tamper proof Provided with non-return valve Un-affected by grit and particulates Provided with wire and lead seal Not effected by Magnetic field.
CERTIFICATIONS:
ISO 4064 (International Organization Standardization) Complaint
OIML: R49(International Organization for Legal Metrology)
MID/2004/22/EEC/AWWA/JWWA
DETAIL OF METROLOGICAL SPECIFICATIONS:
Size (20mm) Accuracy: Class II Material : Bras/Non-ferrous metal Protection Class: IP-68 Ambient Temperature: +5 to 55°C Liquid Temperature: Up to 50°C Maximum Working Pressure =16Bars Flow rate: Q3/Q1 = 160 Maximum Flow rate (Q3) : 4.0m3/ hr
INSTALLATION:
Horizontal
TECHNICAL FORM A-4 (c)
TECHNICAL SPECIFICATIONS OF OFFICERED METERS
Water Meter Type: Multi-Jet Semi Dry Dial DN (25 mm)
Country of Origin:___________________________ Brand Name_____________ Model No:__________
Properties of water Meters Comply /Non-Comply Remarks
GENERAL FEATURES:
Possibility for both visual & Automated Meter Reading (AMR) outputs
Tamper proof Provided with non-return valve Un-affected by grit and particulates Provided with wire and lead seal Not effected by Magnetic field.
CERTIFICATIONS:
ISO 4064 (International Organization Standardization) Complaint
OIML: R49(International Organization for Legal Metrology)
MID/2004/22/EEC/AWWA/JWWA
DETAIL OF METROLOGICAL SPECIFICATIONS:
Size (25mm) Accuracy: Class II Material : Bras/Non-ferrous metal Protection Class: IP-68 Ambient Temperature: +5 to 55°C Liquid Temperature: Up to 50°C Maximum Working Pressure =16Bars Flow rate: Q3/Q1 = 160 Maximum Flow rate (Q3) : 6.3m3/ hr
INSTALLATION:
Horizontal
TECHNICAL FORM A-5 (a)
TECHNICAL SPECIFICATIONS OF OFFICERED METERS
Water Meter Type: Multi-Jet Dry Dial DN (15 mm)
Country of Origin:___________________________ Brand Name_____________ Model No:__________
Properties of water Meters Comply /Non-Comply Remarks
GENERAL FEATURES:
Possibility for both visual & Automated Meter Reading (AMR) outputs
Tamper proof Provided with non-return valve Un-affected by grit and particulates Provided with wire and lead seal Not effected by Magnetic field.
CERTIFICATIONS:
ISO 4064 (International Organization Standardization) Complaint
OIML: R49(International Organization for Legal Metrology)
MID/2004/22/EEC/AWWA/JWWA
DETAIL OF METROLOGICAL SPECIFICATIONS:
Size (15mm) Accuracy: Class II Material : Bras/Non-ferrous metal Protection Class: IP-68 Ambient Temperature: +5 to 55°C Liquid Temperature: Up to 50°C Maximum Working Pressure =16Bars Flow rate: Q3/Q1 = 160 Maximum Flow rate (Q3) : 2.5m3/ hr
INSTALLATION:
Horizontal
TECHNICAL FORM A-5 (b)
TECHNICAL SPECIFICATIONS OF OFFICERED METERS
Water Meter Type: Multi-Jet Dry Dial DN (20 mm)
Country of Origin:___________________________ Brand Name_____________ Model No:__________
Properties of water Meters Comply /Non-Comply Remarks
GENERAL FEATURES:
Possibility for both visual & Automated Meter Reading (AMR) outputs
Tamper proof Provided with non-return valve Un-affected by grit and particulates Provided with wire and lead seal Not effected by Magnetic field.
CERTIFICATIONS:
ISO 4064 (International Organization Standardization) Complaint
OIML: R49(International Organization for Legal Metrology)
MID/2004/22/EEC/AWWA/JWWA
DETAIL OF METROLOGICAL SPECIFICATIONS:
Size (20mm) Accuracy: Class II Material : Bras/Non-ferrous metal Protection Class: IP-68 Ambient Temperature: +5 to 55°C Liquid Temperature: Up to 50°C Maximum Working Pressure =16Bars Flow rate: Q3/Q1 = 160 Maximum Flow rate (Q3) : 4.0m3/ hr
INSTALLATION:
Horizontal
TECHNICAL FORM A-5 (c)
TECHNICAL SPECIFICATIONS OF OFFICERED METERS
Water Meter Type: Multi-Jet Dry Dial DN (25 mm)
Country of Origin:___________________________ Brand Name_____________ Model No:__________
Properties of water Meters Comply /Non-Comply Remarks
GENERAL FEATURES:
Possibility for both visual & Automated Meter Reading (AMR) outputs
Tamper proof Provided with non-return valve Un-affected by grit and particulates Provided with wire and lead seal Not effected by Magnetic field.
CERTIFICATIONS:
ISO 4064 (International Organization Standardization) Complaint
OIML: R49(International Organization for Legal Metrology)
MID/2004/22/EEC/AWWA/JWWA
DETAIL OF METROLOGICAL SPECIFICATIONS:
Size (25mm) Accuracy: Class II Material : Bras/Non-ferrous metal Protection Class: IP-68 Ambient Temperature: +5 to 55°C Liquid Temperature: Up to 50°C Maximum Working Pressure =16Bars Flow rate: Q3/Q1 = 160 Maximum Flow rate (Q3) : 6.3m3/ hr
INSTALLATION:
Horizontal
TECHNICAL FORM B-1 (a)
TECHNICAL SPECIFICATIONS OF OFFICERED METERS
Water Meter Type: Static Meters (Ultrasonic Technology) DN (15 mm)
Country of Origin:___________________________ Brand Name_____________ Model No:__________
Properties of water Meters Comply /Non-Comply Remarks
GENERAL FEATURES:
No moving parts Both Visual (LCD) with or without
Automated Meter Reading outputs
As per class 2 of OIML/ISO Specifications (Current)
Temper Proof Un-affected by grit and particulates No reverse flow measurements.
CERTIFICATIONS:
ISO 4064 (International Organization Standardization) Complaint
OIML: R49(International Organization for Legal Metrology)
MID/2004/22/EEC/AWWA/JWWA
DETAIL OF METROLOGICAL SPECIFICATIONS:
Size (15mm) Accuracy: Class II Material : Bras/Non-ferrous metal Protection Class: IP-68 Ambient Temperature: +5 to 55°C Liquid Temperature: Up to 50°C Maximum Working Pressure =16Bars Flow rate: Q3/Q1 = 160 Maximum Flow rate (Q3) : 2.5m3/ hr Battery life: Minimum 10 years
INSTALLATION:
Horizontal or Vertical Position
TECHNICAL FORM B-1 (b)
TECHNICAL SPECIFICATIONS OF OFFICERED METERS
Water Meter Type: Static Meters (Ultrasonic Technology) DN (20 mm)
Country of Origin:___________________________ Brand Name_____________ Model No:__________
Properties of water Meters Comply /Non-Comply Remarks
GENERAL FEATURES:
No moving parts Both Visual (LCD) with or without
Automated Meter Reading outputs
As per class 2 of OIML/ISO Specifications (Current)
Temper Proof Un-affected by grit and particulates No reverse flow measurements.
CERTIFICATIONS:
ISO 4064 (International Organization Standardization) Complaint
OIML: R49(International Organization for Legal Metrology)
MID/2004/22/EEC/AWWA/JWWA
DETAIL OF METROLOGICAL SPECIFICATIONS:
Size (20mm) Accuracy: Class II Material : Bras/Non-ferrous metal Protection Class: IP-68 Ambient Temperature: +5 to 55°C Liquid Temperature: Up to 50°C Maximum Working Pressure =16Bars Flow rate: Q3/Q1 = 160 Maximum Flow rate (Q3) : 4.0m3/ hr Battery life: Minimum 10 years
INSTALLATION:
Horizontal or Vertical Position
TECHNICAL FORM B-1 (c)
TECHNICAL SPECIFICATIONS OF OFFICERED METERS
Water Meter Type: Static Meters (Ultrasonic Technology) DN (25 mm)
Country of Origin:___________________________ Brand Name_____________ Model No:__________
Properties of water Meters Comply /Non-Comply Remarks
GENERAL FEATURES:
No moving parts Both Visual (LCD) with or without
Automated Meter Reading outputs
As per class 2 of OIML/ISO Specifications (Current)
Temper Proof Un-affected by grit and particulates No reverse flow measurements.
CERTIFICATIONS:
ISO 4064 (International Organization Standardization) Complaint
OIML: R49(International Organization for Legal Metrology)
MID/2004/22/EEC/AWWA/JWWA
DETAIL OF METROLOGICAL SPECIFICATIONS:
Size (25mm) Accuracy: Class II Material : Bras/Non-ferrous metal Protection Class: IP-68 Ambient Temperature: +5 to 55°C Liquid Temperature: Up to 50°C Maximum Working Pressure =16Bars Flow rate: Q3/Q1 = 160 Maximum Flow rate (Q3) : 6.3m3/ hr Battery life: Minimum 10 years
INSTALLATION:
Horizontal or Vertical Position
TECHNICAL FORM B-2 (a)
TECHNICAL SPECIFICATIONS OF OFFICERED METERS
Water Meter Type: Static Meters (Electromagnetic) DN (15 mm)
Country of Origin:___________________________ Brand Name_____________ Model No:__________
Properties of water Meters Comply /Non-Comply Remarks
GENERAL FEATURES:
No moving parts Both Visual (LCD) with or without
Automated Meter Reading outputs
As per class 2 of OIML/ISO Specifications (Current)
Temper Proof Un-affected by grit and particulates No reverse flow measurements.
CERTIFICATIONS:
ISO 4064 (International Organization Standardization) Complaint
OIML: R49(International Organization for Legal Metrology)
MID/2004/22/EEC/AWWA/JWWA
DETAIL OF METROLOGICAL SPECIFICATIONS:
Size (15mm) Accuracy: Class II Material : Bras/Non-ferrous metal Protection Class: IP-68 Ambient Temperature: +5 to 55°C Liquid Temperature: Up to 50°C Maximum Working Pressure =16Bars Flow rate: Q3/Q1 = 160 Maximum Flow rate (Q3) : 2.5m3/ hr Battery life: Minimum 10 years
INSTALLATION:
Horizontal or Vertical Position
TECHNICAL FORM B-2 (b)
TECHNICAL SPECIFICATIONS OF OFFICERED METERS
Water Meter Type: Static Meters (Electromagnetic) DN (20 mm)
Country of Origin:___________________________ Brand Name_____________ Model No:__________
Properties of water Meters Comply /Non-Comply Remarks
GENERAL FEATURES:
No moving parts Both Visual (LCD) with or without
Automated Meter Reading outputs
As per class 2 of OIML/ISO Specifications (Current)
Temper Proof Un-affected by grit and particulates No reverse flow measurements.
CERTIFICATIONS:
ISO 4064 (International Organization Standardization) Complaint
OIML: R49(International Organization for Legal Metrology)
MID/2004/22/EEC/AWWA/JWWA
DETAIL OF METROLOGICAL SPECIFICATIONS:
Size (20mm) Accuracy: Class II Material : Bras/Non-ferrous metal Protection Class: IP-68 Ambient Temperature: +5 to 55°C Liquid Temperature: Up to 50°C Maximum Working Pressure =16Bars Flow rate: Q3/Q1 = 160 Maximum Flow rate (Q3) : 4.0m3/ hr Battery life: Minimum 10 years
INSTALLATION:
Horizontal or Vertical Position
TECHNICAL FORM B-2 (c)
TECHNICAL SPECIFICATIONS OF OFFICERED METERS
Water Meter Type: Static Meters (Electromagnetic) DN (25 mm)
Country of Origin:___________________________ Brand Name_____________ Model No:__________
Properties of water Meters Comply /Non-Comply Remarks
GENERAL FEATURES:
No moving parts Both Visual (LCD) with or without
Automated Meter Reading outputs
As per class 2 of OIML/ISO Specifications (Current)
Temper Proof Un-affected by grit and particulates No reverse flow measurements.
CERTIFICATIONS:
ISO 4064 (International Organization Standardization) Complaint
OIML: R49(International Organization for Legal Metrology)
MID/2004/22/EEC/AWWA/JWWA
DETAIL OF METROLOGICAL SPECIFICATIONS:
Size (25mm) Accuracy: Class II Material : Bras/Non-ferrous metal Protection Class: IP-68 Ambient Temperature: +5 to 55°C Liquid Temperature: Up to 50°C Maximum Working Pressure =16Bars Flow rate: Q3/Q1 = 160 Maximum Flow rate (Q3) : 6.3m3/ hr Battery life: Minimum 10 years
INSTALLATION:
Horizontal or Vertical Position
TECHNICAL FORM B-3 (a)
TECHNICAL SPECIFICATIONS OF OFFICERED METERS
Water Meter Type: Static Meters (Fluidic Oscilation (smart Meter) ) DN (15 mm)
Country of Origin:___________________________ Brand Name_____________ Model No:__________
Properties of water Meters Comply /Non-Comply Remarks
GENERAL FEATURES:
No moving parts Both Visual (LCD) with or without
Automated Meter Reading outputs
As per class 2 of OIML/ISO Specifications (Current)
Temper Proof Un-affected by grit and particulates No reverse flow measurements.
CERTIFICATIONS:
ISO 4064 (International Organization Standardization) Complaint
OIML: R49(International Organization for Legal Metrology)
MID/2004/22/EEC/AWWA/JWWA
DETAIL OF METROLOGICAL SPECIFICATIONS:
Size (15mm) Accuracy: Class II Material : Bras/Non-ferrous metal Protection Class: IP-68 Ambient Temperature: +5 to 55°C Liquid Temperature: Up to 50°C Maximum Working Pressure =16Bars Flow rate: Q3/Q1 = 160 Maximum Flow rate (Q3) : 2.5m3/ hr Battery life: Minimum 10 years
INSTALLATION:
Horizontal or Vertical Position
TECHNICAL FORM B-3 (b)
TECHNICAL SPECIFICATIONS OF OFFICERED METERS
Water Meter Type: Static Meters (Fluidic Oscilation (smart Meter) ) DN (20 mm)
Country of Origin:___________________________ Brand Name_____________ Model No:__________
Properties of water Meters Comply /Non-Comply Remarks
GENERAL FEATURES:
No moving parts Both Visual (LCD) with or without
Automated Meter Reading outputs
As per class 2 of OIML/ISO Specifications (Current)
Temper Proof Un-affected by grit and particulates No reverse flow measurements.
CERTIFICATIONS:
ISO 4064 (International Organization Standardization) Complaint
OIML: R49(International Organization for Legal Metrology)
MID/2004/22/EEC/AWWA/JWWA
DETAIL OF METROLOGICAL SPECIFICATIONS:
Size (20mm) Accuracy: Class II Material : Bras/Non-ferrous metal Protection Class: IP-68 Ambient Temperature: +5 to 55°C Liquid Temperature: Up to 50°C Maximum Working Pressure =16Bars Flow rate: Q3/Q1 = 160 Maximum Flow rate (Q3) : 4.0m3/ hr Battery life: Minimum 10 years
INSTALLATION:
Horizontal or Vertical Position
TECHNICAL FORM B-3 (c)
TECHNICAL SPECIFICATIONS OF OFFICERED METERS
Water Meter Type: Static Meters (Fluidic Oscilation (smart Meter)) DN (25 mm)
Country of Origin:___________________________ Brand Name_____________ Model No:__________
Properties of water Meters Comply /Non-Comply Remarks
GENERAL FEATURES:
No moving parts Both Visual (LCD) with or without
Automated Meter Reading outputs
As per class 2 of OIML/ISO Specifications (Current)
Temper Proof Un-affected by grit and particulates No reverse flow measurements.
CERTIFICATIONS:
ISO 4064 (International Organization Standardization) Complaint
OIML: R49(International Organization for Legal Metrology)
MID/2004/22/EEC/AWWA/JWWA
DETAIL OF METROLOGICAL SPECIFICATIONS:
Size (25mm) Accuracy: Class II Material : Bras/Non-ferrous metal Protection Class: IP-68 Ambient Temperature: +5 to 55°C Liquid Temperature: Up to 50°C Maximum Working Pressure =16Bars Flow rate: Q3/Q1 = 160 Maximum Flow rate (Q3) : 6.3m3/ hr Battery life: Minimum 10 years
INSTALLATION:
Horizontal or Vertical Position
APPENDIX-B
Certifications of Offered Meter(s)
[The Applicant is required to attach:
1. Compliance certificate of ISO: 4064 (International Organization Standardization) 2. Certificate issued by an authorized body of OIML: R49 (International Organization for
legal Metrology) 3. Certificate issued by an authorized body of MID/2004/22/EEC/AWWA/JWWA]
APPENDIX-C
List of Quality Assurance / Control Methodology and
Equipment
[The Applicant shall provide a list of all Equipment available at Manufacturer’s Facility to
carry out the Quality Assurance/Quality Control Test along with related Methodology.]
APPENDIX-D
Documentary Proof as Original Manufacturer of Offered
Meter(s)
[The Applicant shall provide Documentary Proof to the effect that they are the Original
Equipment Manufacturer of the required goods. In case of Authorized Agent, the Applicant
also has to provide documentary proof that its principal is Original Equipment
Manufacturer of the required goods.]
APPENDIX-E
Evidence of Production per Annum
[The Applicant shall provide Certified Evidence of the Production of Offered Meter(s) per
Annum.]
APPENDIX-F
Financial Capability
[The Applicant shall provide financial information to demonstrate that they meet the
requirements stated in the Evaluation Criteria. A copy of Audited Financial Statement for
03 years should be attached.]
APPENDIX-G
Details of Supply Orders
[The Applicant shall provide Supply of Mechanical Water meters (Multi-jet, Volumetric
Rotary Piston, Notating Disc) having in last 3 years. Supply Order details showing contract
amount and Performance Certificates are to be submitted].
Similar Contract No. Information
Contract Identification
Award date
Completion date
Select Role in Contract Manufacturer
Authorized Dealer / Sole Agents
Total Contract Amount USD or equivalent PKR USD or equivalent PKR
Employer's Name:
Address:
Telephone/fax number
E-mail:
Note: Use more pages if required
APPENDIX-H
HR Profile of Company Profile
[The Applicant shall provide the complete Human Resource Profile of company.]
APPENDIX-I
Tax Registration Details
[The Applicant shall provide certified relevant tax documents/taxpayer registration
certificate of Taxation Authority of parent country of OEM or Authorized Agent, whichever
is applicable. In case of Authorized Agent, Applicant shall submit FBR National Tax Number
Certificate and sales tax registration, in particular.]
APPENDIX-J
WARRANTY CERTIFICATE
Attach One (01) year Warranty Certificate of offered meters.
REGISTRATION CERTIFICATE / ENLISMENT LETTER
To,
M/s _______________________________________ Address__________________________________
No.P&S/__________ Dated _________________
Subject: ENLISTMENT OF WATER METER MANUFACTURERS / SOLE AGENTS /
AUTHORIZED DEALERS IN WATER AND SANITATION AGENCY, LAHORE,
FOR THE FISCAL YEAR……………….
Your firm has been approved for the Enlistment as Water Meter Manufacturers or Sole Agents or Authorized Dealers for the current Financial Year _________ in Water & Sanitation Agency Lahore. You are authorized to provide following water meters to WASA Consumers / Customers.
Sr. No.
Dia of Meter
TYPE Mechanical Water Meters
Volumetric rotary piston or Notating Disc or Multi Jet (Wet Dial or Semi Dry Dial or Dry Dial)
Make Model
1 15 mm - - - 2 20 mm - - - 3 25 mm - - -
Sr. No.
Dia of Meter
TYPE Static Water Meters
Ultra-Sonic Technology or Electromagnetic or Fluidic Oscillation (Smart Meters)
Make Model
1 15 mm - - - 2 20 mm - - - 3 25 mm - - -
i) Should WASA Lahore be dissatisfied with your work, conduct and technical efficiency, WASA Lahore shall be at liberty to remove your name from the approved list of Manufacturers or Sole Agents or Authorized Dealers or even black list your firm, debarring you from all future supplies to customers / consumers of WASA, Lahore, without assigning any reason thereof. ii) The firm within one (01) month shall provide a well-established website with product verification / confirmation portal to verify water meter regarding following aspects.
Date of Manufacturing Site of Manufacturing / Country of Origin Details of Water Meter concerning type, discharge, class, dia and all other relevant
information. Failing which the firm shall be delisted / removed from WASA panel.
APPENDEX-K
WATER AND SANITATION AGENCY (LDA) DIRECTORATE OF PROCUREMENT & STORES
59-F GULSHAN-E-RAVI LAHORE
iii) The firm shall provide one (01) year unconditional warranty for water meters to the consumer. iv) The firm shall be bound to provide warranty and after sale services to the consumer / customer in case of any complaint received form consumer / customer regarding performance, services, availability of water meters, accessories / parts and after sale services WASA Lahore reserves the right to delist the firm from its panel of approved Water Meter Manufacturer / Sole Agents / Authorized Dealers. v) The approved enlisted / registered firm shall provide all necessary fittings i.e couplings, nuts, bushes, etc. required for installation of Water Meter. vi) The approved enlisted / registered firm must have one (1) outlet in WASA Lahore jurisdiction easily accessible to WASA Consumers / Customers. vii) Application for renewal for the year ____________ complete in all respect shall be submitted to WASA Lahore not later than 30th June _________ or as notified later on. If the application for the renewal is received after due date you will be penalized for 25% of renewal fee per quarter. viii) All relevant instructions issued by WASA, Lahore from time to time about the private purchase of water meters shall be observed / followed strictly. ix) The firm has deposited enlistment fee of Rs.50,000.00 in Bank_________________Branch______________, Vide Challan No._______________ dated:_____________.
DIRECTOR PROCUREMENT & STORES WASA, LDA, LAHORE
C.C 1. DMD (Engg), WASA, Lahore. 2. DMD (FA&R), WASA, Lahore. 3. All Director Revenues, WASA, Lahore.
RENEWAL CERTIFICATE / LETTER
To,
M/s _______________________________________ Address__________________________________
No.P&S/__________ Dated _________________
Subject: RENEW OF WATER METER MANUFACTURERS / SOLE AGENTS /
AUTHORIZED DEALERS IN WATER AND SANITATION AGENCY, LAHORE,
FOR THE FISCAL YEAR……………….
Your renewal application has been approved as Water Meter Manufacturers or Sole Agents or Authorized Dealers for the current Financial Year _________ in Water & Sanitation Agency Lahore. You are authorized to provide following water meters to WASA Consumers / Customers.
Sr. No.
Dia of Meter
TYPE Mechanical Water Meters
Volumetric rotary piston or Notating Disc or Multi Jet (Wet Dial or Semi Dry Dial or Dry Dial)
Make Model
1 15 mm - - - 2 20 mm - - - 3 25 mm - - -
Sr. No. Dia of Meter
TYPE Static Water Meters
Ultra-Sonic Technology or Electromagnetic or Fluidic Oscillation (Smart Meters)
Make Model
1 15 mm - - - 2 20 mm - - - 3 25 mm - - -
i) Should WASA Lahore be dissatisfied with your work, conduct and technical efficiency, WASA Lahore shall be at liberty to remove your name from the approved list of Manufacturers or Sole Agents or Authorized Dealers or even black list your firm, debarring you from all future supplies to customers / consumers of WASA, Lahore, without assigning any reason thereof. ii) Application for renewal for the year ____________ complete in all respect shall be submitted to WASA Lahore not later than 30th June _________ or as notified later on. If the application for the renewal is received after due date you will be penalized for 25% of renewal fee per quarter. iii) All relevant instructions issued by WASA, Lahore from time to time about the private purchase of water meters shall be observed / followed strictly.
APPENDEX-L
WATER AND SANITATION AGENCY (LDA) DIRECTORATE OF PROCUREMENT & STORES
59-F GULSHAN-E-RAVI LAHORE
Iv) The firm has deposited renewal fee of Rs._________________ in Bank_________________ Branch______________, Vide Challan No._______________ dated:_____________.
DIRECTOR PROCUREMENT & STORES WASA, LDA, LAHORE
C.C. 1. DMD (Engg), WASA, Lahore. 2. DMD (FA&R), WASA, Lahore. 3. All Director Revenues, WASA, Lahore.
Notified Specifications