Enriching the lives of animals and humanswww.BHenrich.com 1-800-808-5609

The B/H Prim-A-Rich 8.0 Housing ModulesReference B/H Master Quote #BHM-004761 of November 2003

© 2003 Britz-Heidbrink, Inc. All rights reserved. November 10, 2003 Page 2

Value Added Features

Ergonomic Factors•Each primary component must weigh less than 400 pounds•Push - Pull handles strategically placed to aid in the movement of the units•Provide Zero threshold cage openings to improve access and reduce lifting injuries•Must be easy rolling, with maintenance free casters•Must allow for use of an exercise insert to reduce frequency of animal shifts into a transfer box

Thermo-neutral Surfaces•Composite side and/or back panels•Thermo-neutral push/pull handles to reduce the risk of handling hot surfaces after cage washing•Composite barrier panels in play/exercise cage

Social Housing• Need Safe pairing options with variety of divider panel configurations• Must provide horizontal pairing in 2 over 2 cage configuration• Must provide common social area for up to four animals

Reduces Transfer Hazards•Animals can self transfer to social cage for routine cage sanitization procedures•Eliminates requirement for caregivers to hold heavy transfer box to cage front for transfer•Reduces potential for animal exposure, scratches and bites with close animal contact 

© 2003 Britz-Heidbrink, Inc. All rights reserved. November 10, 2003 Page 3

Value Added Features (cont)

Environmentally Enhanced• Thermo-neutral surfaces• Ability to break eye contact• Interchangeable enrichment panels prevents the primary cage from

becoming stagnate and provides a multitude of feeding and foraging options• Social housing options with from 1 to 3 additional animals• Exercise potential in large social insert cage with multiple levels for social

structure• Solid, sound dampening panels enhance the environment by providing

security for animals to break eye contact and to break contact with drafts from the HVAC system

Noise Reduction Features• Sound dampening side panels and floors, reduces the ability of dominant

animals to express aggression by beating on noisy steel surfaces• Stainless steel rollers on squeeze back for quiet operation• Quiet, rolling casters

© 2003 Britz-Heidbrink, Inc. All rights reserved. November 10, 2003 Page 4

Sizing Up the 8.0 “Apart”-ments

Style: 2 over 2 primate housing unit, stainless steel, Full unit breaks apart into two 1 over 1 units for ease of transport.

Exterior Dimension: Fully Assembled 67-1/4"w x 44"d x 82-7/16"h, Each Half 33-5/8"w x 44"d x 82-7/16"h

Inside Compartment Dimension: 31"w x 38"d x 36"h

Floor Space: 8.1 sq.ft./compartment

Framing: 1" x 1" x 18 ga. T304 stainless steel square tube

Finish: Satin

Note: unit shown here with wire mesh fronts

© 2003 Britz-Heidbrink, Inc. All rights reserved. November 10, 2003 Page 5

Additional detail 8.0 “Apart”-ments

Unit shown with halves separated.

Note: unit show here with wire mesh front screens.

© 2003 Britz-Heidbrink, Inc. All rights reserved. November 10, 2003 Page 6

Cage Front Details Front Panels:All front panels of the unit will accommodate small enrichment devices, a plain enrichment panel insert will come standard with each front. Also, front will include a "tamper proof" card holder, and 1 small primate feeder mounting plate.

All wire mesh with horizontal sliding door (#000000)

© 2003 Britz-Heidbrink, Inc. All rights reserved. November 10, 2003 Page 7

Squeeze Back Details

Squeeze back: 1" x 1" x 3/16" wire mesh on 1/2" round rod frame. Single handed pull, integrated square tube pull bars that also serve as perches for occupants of cage. Operated on rollers and guide channels. Tamper proof and ratcheting locking mechanism.

© 2003 Britz-Heidbrink, Inc. All rights reserved. November 10, 2003 Page 8

Back Panel Details

Back Panels: 1/4" thick colorful composite (Trespa) material. Panel is fastened to frame with rivets.

Aluminum Grey

Graphite Grey

Azurite Blue

Bottle Green

© 2003 Britz-Heidbrink, Inc. All rights reserved. November 10, 2003 Page 9

Side Panel Details

Side Panels: Split panel with upper portion filled with 1" x 1" x 3/16" wire mesh on 7/16" round rod frame welded onto cage frame. Lower portion is filled 1/4" thick colorful composite (Trespa).

1” Wire Mesh

¼” Trespa

Upper Compartment

1” Wire Mesh

¼” Trespa

Lower Compartment

Aluminum Grey Graphite Grey Azurite Blue Bottle Green

© 2003 Britz-Heidbrink, Inc. All rights reserved. November 10, 2003 Page 10

Divider Panel SpecificsInterchangeable Socialization Panel(See page 11 for inserts)

Fixed Stainless Barrier

Stainless steel rod and tube door guides for quiet, smooth and maintenance free operation.

Flat bar pull handle, pivots down when door is in full open position. Includes lock points at full open/close positions.

Divider Panels: Split panel with sliding door to allow horizontal access between cage compartments and transfer to optional exercise unit. Sliding door panel includes removable filler to allow a number of different socialization options. User must choose fill panel from the following options (4 inserts required per 2-over-2 housing unit):

Grooming Bar Insert (#011839)

1" Wire Mesh Insert (#011840)

Opaque Trespa Insert (#011838)

Clear Lexan Insert (#011842)

© 2003 Britz-Heidbrink, Inc. All rights reserved. November 10, 2003 Page 11

Divider Panel Inserts

Opaque Trespa Insert (#011838)

1" Wire Mesh Insert (#011840)

Clear Lexan Insert (#011842)

Grooming Bar Insert (#011839)

Aluminum Grey Graphite Grey Azurite Blue Bottle Green

© 2003 Britz-Heidbrink, Inc. All rights reserved. November 10, 2003 Page 12

FlooringFlooring: 1" x 1" x 3/16" wire mesh, welded to 7/16" round rod frame. Floor panel is welded into unit and is not removable for vertical access.

© 2003 Britz-Heidbrink, Inc. All rights reserved. November 10, 2003 Page 13

Excreta Pan OptionsThe following pan options are available. 4 Pans are required per 2-over-2 housing unit

Excreta Pan, stainless steel, 38-1/2" x 30-1/2" x 3/4" deep, Flat Pan (#011837)

Stainless, Flat Pan(#011837)

© 2003 Britz-Heidbrink, Inc. All rights reserved. November 10, 2003 Page 14

Primate Feeders & Cover PlatesEach Cage Compartment includes a bracket for a slide in feeder or cover plate.

Feeder, Small Primate (#002354)

Feeder, Cover Plate Small (#002352)

Stainless Steel, Small Primate Feeder w/ LidDimensions (overall): ~6-3/4”h x 4-1/2” w x 3-3/4” d

Food Volume: ~80 cubic inches(#002354)

Stainless Steel, Small Primate Cover plate(#002352)

© 2003 Britz-Heidbrink, Inc. All rights reserved. November 10, 2003 Page 15

Water Manifold OptionsEach half of the 2-over-2 unit is designed to accept either a rear mounted or side mounted automatic watering manifold. One manifold per break-apart half. (Note: These manifolds do not include individual shut-off valves.) Please select from the following options:

Side mounted, stainless steel, automatic watering manifold with small primate valves. (#011841)

Rear mounted, stainless steel, automatic watering manifold with small primate valves. (#012422)

Rear MountedSide Mounted

© 2003 Britz-Heidbrink, Inc. All rights reserved. November 10, 2003 Page 16

Wall LocksWall locks: Twist lock style with rod bar to engage facility retaining system. (#012423)

NOTE: User must specify height of wall lock to ensure proper use with facility retaining system.

© 2003 Britz-Heidbrink, Inc. All rights reserved. November 10, 2003 Page 17

Water/Dry Forager Enrichment

Water/Dry Forager, Small-1" wire mesh basket with polycarbonate foraging pan

© 2003 Britz-Heidbrink, Inc. All rights reserved. November 10, 2003 Page 18

Browse Basket Enrichment

Browse Basket, Small-1" wire mesh basket with stainless steel pan

© 2003 Britz-Heidbrink, Inc. All rights reserved. November 10, 2003 Page 19

Roller Panel EnrichmentRoller Panel, Small -1" wire mesh panel with mounting bracket to hold 3 Fleece Roller Holders and/or Feeder Tubes

Fleece Roller Holder-Stainless steel fleece roller holder for use with Roller Panel

Feeder Tube-PVC tube with holes to be used with Roller Panel

© 2003 Britz-Heidbrink, Inc. All rights reserved. November 10, 2003 Page 20

Trespa Virtuon

Product Material Specification:

1. Modulus of Elasticity, 1.5 Million psi minimum

2. Shear Strength, 2000 psi minimum

3. Compressive Strength, 24000 psi minimum

4. Weight 93 pounds per cubic foot maximum

5. Flammability: Self Extinguishing

6. Water Absorption 3% maximum

7. Use temperature 350F maximum

8. Non-porous surface and edges

9. Will not support fungus or bacteria

(Source: www.trespanorthamerica.com

Product Material Specification:

1. Modulus of Elasticity, 1.5 Million psi minimum

2. Shear Strength, 2000 psi minimum

3. Compressive Strength, 24000 psi minimum

4. Weight 93 pounds per cubic foot maximum

5. Flammability: Self Extinguishing

6. Water Absorption 3% maximum

7. Use temperature 350F maximum

8. Non-porous surface and edges

9. Will not support fungus or bacteria

(Source: www.trespanorthamerica.com

• A tough, solid, thermo-neutral material with a satin finish. The satin finish is comprised of cross linked copolymers.•Trespa “is a decorative panel based on thermosetting resins, homogeneously reinforced with cellulose fibers and manufactured under high pressure and temperature. Using special techniques, the panels have an integrated, decorative surface made of melamine-impregnated paper.”

•The following colors and patterns are readily available for use in your 8.0 housing units.Aluminum Grey Graphite Grey Azurite Blue Bottle Green