+ All Categories
Home > Documents > Enterprise 500 MKIV High Performance Production Plasma ...

Enterprise 500 MKIV High Performance Production Plasma ...

Date post: 27-Jan-2022
Category:
Upload: others
View: 3 times
Download: 0 times
Share this document with a friend
8
June 15, 2015 Standard Sheet Metal Machinery. 1005 North Washington Street Lisbon Iowa 52253 Mailing address PO Box 2673 Cedar Rapids, Iowa 52406 USA Tel: +1 319 408 1111 (GMT 6) Fax:+1 319 538 0181 Toll Free (USA) 1 866 935 6325 Specifications are correct on the date of publication and are subject to change without notice. [email protected] www.standardsmm.com © Standard Sheet Metal Machinery, Inc. 2008 * Patent pending Enterprise 500 MKIV High Performance Production Plasma Cutting System The Perfect Replacement Plasma Cutting Machine
Transcript

June 15, 2015

Standard Sheet Metal Machinery.

1005 North Washington Street

Lisbon Iowa 52253

Mailing address

PO Box 2673

Cedar Rapids, Iowa 52406 USA

Tel: +1 319 408 1111 (GMT – 6)

Fax:+1 319 538 0181

Toll Free (USA) 1 866 935 6325

Specifications are correct on the date of publication and are subject to change without notice.

[email protected] www.standardsmm.com

© Standard Sheet Metal Machinery, Inc. 2008

* Patent pending

Enterprise 500 MKIV High Performance Production Plasma

Cutting System

The Perfect Replacement Plasma Cutting Machine


June 15, 2015

Standard Sheet Metal Machinery.

1005 North Washington Street

Lisbon Iowa 52253

Mailing address

PO Box 2673

Cedar Rapids, Iowa 52406 USA

Tel: +1 319 408 1111 (GMT – 6)

Fax:+1 319 538 0181

Toll Free (USA) 1 866 935 6325

Specifications are correct on the date of publication and are subject to change without notice.

[email protected] www.standardsmm.com

© Standard Sheet Metal Machinery, Inc. 2008

* Patent pending

Enterprise 500 Plasma Machine with Air Zone table

The Enterprise 500MKIV plasma cutter is designed as a high performance production plasma cutting machine. Designed to run on your existing software, the machine is compatible with all major software packages. Using your existing software can lower your overall investment costs.


June 15, 2015

Standard Sheet Metal Machinery.

1005 North Washington Street

Lisbon Iowa 52253

Mailing address

PO Box 2673

Cedar Rapids, Iowa 52406 USA

Tel: +1 319 408 1111 (GMT – 6)

Fax:+1 319 538 0181

Toll Free (USA) 1 866 935 6325

Specifications are correct on the date of publication and are subject to change without notice.

[email protected] www.standardsmm.com

© Standard Sheet Metal Machinery, Inc. 2008

* Patent pending

Quick change air balanced torch and remote pause button (option)

The cutting torch can be removed from the machine without tools.


June 15, 2015

Standard Sheet Metal Machinery.

1005 North Washington Street

Lisbon Iowa 52253

Mailing address

PO Box 2673

Cedar Rapids, Iowa 52406 USA

Tel: +1 319 408 1111 (GMT – 6)

Fax:+1 319 538 0181

Toll Free (USA) 1 866 935 6325

Specifications are correct on the date of publication and are subject to change without notice.

[email protected] www.standardsmm.com

© Standard Sheet Metal Machinery, Inc. 2008

* Patent pending

Light weight aluminum bridge construction allows faster acceleration and deceleration in the corners and higher operating speeds. Bridge is SERVO Motor driven on both ends to eliminate whip.

Aluminum Bridge construction


June 15, 2015

Standard Sheet Metal Machinery.

1005 North Washington Street

Lisbon Iowa 52253

Mailing address

PO Box 2673

Cedar Rapids, Iowa 52406 USA

Tel: +1 319 408 1111 (GMT – 6)

Fax:+1 319 538 0181

Toll Free (USA) 1 866 935 6325

Specifications are correct on the date of publication and are subject to change without notice.

[email protected] www.standardsmm.com

© Standard Sheet Metal Machinery, Inc. 2008

* Patent pending

Digital SERVO Drive

Our SERVO drive controller is digital for the fastest and most precise speed control available. Motor speed reduction is done thru zero maintenance precision gear boxes. Compare the cutting results of radius parts using this near zero backlash gearbox drive reduction. The drive control is conversational and allows our engineers to connect and diagnose the machine via the Enterprise touch screen computer control. This remote diagnostic capability can reduce the need for expensive service engineer travel to make repairs or adjustments.


June 15, 2015

Standard Sheet Metal Machinery.

1005 North Washington Street

Lisbon Iowa 52253

Mailing address

PO Box 2673

Cedar Rapids, Iowa 52406 USA

Tel: +1 319 408 1111 (GMT – 6)

Fax:+1 319 538 0181

Toll Free (USA) 1 866 935 6325

Specifications are correct on the date of publication and are subject to change without notice.

[email protected] www.standardsmm.com

© Standard Sheet Metal Machinery, Inc. 2008

* Patent pending

83” / 2.08 M x 147” / 3.68 M machine footprint

The Enterprise Plasma AIR ZONE* cutting table has five separate cutting zones, each with an exhaust port. Each of our five table cutting zones include computer controlled air intake and exhaust dampers. These dampers direct the exhaust air flow only to the zone directly beneath the cutting torch. This damper system substantially reduces the cutting smoke residue and produces noticeably cleaner cut parts.

Typical cutting results


June 15, 2015

Standard Sheet Metal Machinery.

1005 North Washington Street

Lisbon Iowa 52253

Mailing address

PO Box 2673

Cedar Rapids, Iowa 52406 USA

Tel: +1 319 408 1111 (GMT – 6)

Fax:+1 319 538 0181

Toll Free (USA) 1 866 935 6325

Specifications are correct on the date of publication and are subject to change without notice.

[email protected] www.standardsmm.com

© Standard Sheet Metal Machinery, Inc. 2008

* Patent pending

Cleaner cut parts with AIRZONE table

(plasma cut parts flipped for photo) Enterprise 500 key features

High Performance Production Plasma machine design

Energy saving air zone table

5 damper controlled cutting exhaust zones

Cleaner cut parts

Lightweight aluminum bridge construction

Table configurable for side or end loading of sheets

Dual side DIGITAL SERVO driven machine

Drive and guide rail are protected underneath the table

Precision near zero backlash sealed gearbox drive speed reduction

Windows 7 or 8 computer control

Machine diagnostics via internet

All wiring is internal for protection

Torch can be removed without tools

Air float cutting torch balance system with tip-up protection

Enterprise Plasma is designed and built in the USA


June 15, 2015

Standard Sheet Metal Machinery.

1005 North Washington Street

Lisbon Iowa 52253

Mailing address

PO Box 2673

Cedar Rapids, Iowa 52406 USA

Tel: +1 319 408 1111 (GMT – 6)

Fax:+1 319 538 0181

Toll Free (USA) 1 866 935 6325

Specifications are correct on the date of publication and are subject to change without notice.

[email protected] www.standardsmm.com

© Standard Sheet Metal Machinery, Inc. 2008

* Patent pending

STANDARD SHEET METAL MACHINERY Phone: 1 319 408 1111(GMT-6) Fax: 1 319 538 0181 Factory/Showroom: 1005 North Washington Street, Lisbon, Iowa 52253 Mailing Address: PO Box 2673, Cedar Rapids, Iowa 52406


Recommended