ENTERPRISE PRODUCTS GBICs, SFPs & Media Converters

ENTERPRISE PRODUCTSGBICs, SFPs & Media Converters

KEY MARKETSWho Buys Telsey Media Converters?

• Media converters market around 300 M$• Switching market more then 10 B$• Enterprise

• Media converters

• Switches for the access and agreggation

• Small and medium LANs do not need heavy modular switches

• etc.

• Network service providers• Media converters

• Access switches

• Residential gateways (CPEs)

• STBs

• etc.

Layer 7 – Application (where Email, FTP, Telnet, etc. access the network) (data)

Layer 6 – Presentation (Encoding of mpeg / jpeg / ascii / text) (data)

Layer 5 – Session (allows applications to establish & end dialog) (data)

Layer 4 – Transport (TCP /UDP – error corrects, Max Tx Unit, segments)

Layer 3 – Network Layer (IP /IPX addresses the data for WAN routing) (packets)

Layer 2 – Data Link Layer (puts raw bits into frames, MAC Address) (frames)

(separate network into VLANs) Layer 1 – Physical Layer (Cable type) (bits)

OSI Seven Layer Model

• Thick Ethernet (Yellow Co-ax - obsolete)

• Thin Ethernet (Black Co-ax - obsolete)

• Unshielded Twisted Pair (Cat 5 / Cat 5e / Cat 6)

• Fibre (Multi Mode / Single Mode)

Layer 1 – The Cable Type

Layer 1 Types of Copper Cable

Spectral

BandwidthChannel Length LAN Applications

Cat 1 Voice Cabling

Cat 2 4MHz 4Mb Token Ring (4 x UTP’s)

Cat 3 16MHz 100m10Mb Ethernet, 4Mb Token Ring

Cat 4 20MHz 100m10Mb Ethernet, 16Mb Token Ring

Cat 5 100MHz 100m 1000Mb Ethernet

Cat 5e * 100MHz 100m 1000Mb Ethernet

Cat 6 ** 100m 1000Mb Ethernet

Cat 6e ** 250MHz 100m 1000Mb Ethernet

Cat 7 600MHz 100mAvailable rarely by some vendors

* e stands for enhanced – has better crosstalk** Cat 6 is expensive, large cross section & large bend radius

• Distance– Spans far greater distance than copper

• Security– Fibre eliminates data signals radiating from a cable– Difficult to ‘tap’ and does not emit signals

• Immunity from Electro-Magnetic Interference (EMI)– Fibre eliminates electrical energy corrupting data on a cable– E.g. lightning, Welding, heavy electrical motors, power generation

• 10Gb cabling

Layer 1 - Why Fibre Optic Cable?

Construction of Glass Fibre

High Density Glass Core

Lower Density Glass Cladding

1 micron = 1 millionth of a metre = 1 µm125 microns = thick human hair

125 µm

Construction of Glass Fibre

Light Source

Light reflects off of high density low density interface

Limitation of Multi Mode Fibre

Sharp pulse of light in – different path lengths through fibre – slightly blurred pulse outLonger the fibre – more the blurBlur limits frequency of light, therefore limits speed of dataEach bounce reduces power of signal, thus reducing max distance of fibre

Types of Fibre

• 62.5/125 Multi Mode fibre – first available fibre type• 50/125 Multi mode fibre – available later - better• Multi Mode = Multi bounce• 2km maximum distance at 100Mbps• 500m maximum distance at 1000Mbps (50/125)• Multi Mode allows ‘tighter’ bends

Multi-mode fibre

62.5 µm

125 µm

Single-mode fibre

9 µm125 µm

9/125 or 10/125µm Single mode ≈ Single bounce Around 100 km maximum distance Large minimum bend radius More expensive optics at each end

Fibre Links mainly have one fibre for Tx one Fibre for RX

Bi-Directional or “Single Fibre” Drivers

With good fibre joints all OK

With bad fibre joints, reflection goes back in Rx

Adding a “prism” at each end can direct Rx and Tx light down the same fibre

Ethernet Copper Distance Limitations

10BaseT 100BaseT 1000BaseT

Cat 5 UTP Copper 100m 100m 100m

Multi Mode Fibre Distances

Wavelength

Distance using 62.5/125

Distance using 50/125

10FL MM 850nm 2Km 2Km

100SX MM 850nm 300m 300m

100FX MM 1310nm 2Km 2Km

1000SX 850nm 220m 550m

1000LX SM (10Km) + Mode conditioning patchcord

1310nm 550m 550m

Advanced Multi Mode Fibre Distances

Wavelength

Distance using 62.5/125(160MHz /Km)

Distance using 50/125 (500MHz/Km)

Distance using 62.5/125(200MHz/Km)

Distance using 50/125(2000MHz/Km)

10FL MM 850nm 2Km 2Km

100SX MM 850nm 300m 300m

100FX MM 1310nm 2Km 2Km

1000SX 850nm 220m 550m

1000LX SM (10Km) + Mode conditioning patchcord

1310nm 550m 550m

10G SR MM 850nm 26m 82m 33m 300m

XPLRM 1300nm 300m 300m 300m 300m

Single Mode Fibre Distance Limitations

Optical Distance using

Standard Wavelength 9/125

1000LX SM (10Km) 1310nm 10Km

1000LX SM (20Km) 1310nm 20Km

1000LX SM (50Km) 1550nm 50Km

1000LX SM (70Km) 1550nm 70Km

XSF 1310nm 10Km

XSF 1550nm 40Km

MMF and 550m/220m limit

• How to increase the distance on MFF?

1000SX 850nm 220m 550m

Wavelength

Distance using 62.5/125(160MHz /Km)

Distance using 50/125 (500MHz/Km)

SMF

MMF

Mode Conditioning Patchcord

• Match both ends of your media converters, SX wont talk to FX etc, match distance too.

• Make sure Fibre patch cords match the rest of the fibre in the run

• Only recommend installing 62.5/125 if the rest of the site is 62.5/125 (if all patch cords match it avoids mistakes)

• If specifying New Multi Mode Fibre Installation use 50/125 it performs better than 62.5/125 for the same cost

Notes - Multi Mode Fibre

10BaseX Ethernet Connectors

10BaseTCat 3, 4, 5 or 5e UTP cable RJ-45 connector 100m max distance

10Base5Thicknet cableAUI connector 500m max distance

10Base2Thinnet cableBNC connector 185m max distance

10Base FL 850nm usually ST type connector

2000m max distance

100BaseX Fast Ethernet Connectors

Typically yellow patch cord means single mode

• 100BaseT on RJ45

• 100BaseFX on SC

• 100BaseFX on MTRJ

MTRJ is High Density (RJ45 size)

Available with & without alignment pins

• 100BaseFX on VF45

Made by 3M, Low cost to terminate

Cover to protect from dust / protect eyes

1000BaseX (Gigabit) Ethernet Connectors

• 1000BaseT on RJ45

• 1000BaseSX on SC• 1000BaseLX on SC

• 1000BaseSX on LC• 1000BaseLX on LC• LC is High density (RJ45 size)

10GBaseX (10 Gig) Ethernet Connectors

• 10GBaseCX4

• 10GBaseSR on LC• 10GBaseLR on LC• 10GBaseER on LC• 10GBaseZR on LC

• 10Mb - Ethernet - Original Ethernet speed, still commonplace IEEE 802.3

– 10Base5 – Thick Ethernet (Coax) - obsolete– 10Base2 – Thin Ethernet (Coax) - obsolete– 10BaseFL – 10Mb over MM Fibre using 850nm drivers– 10BaseT – 10Mb over two unshielded twisted pairs

• 100Mb - Fast Ethernet - 10/100 Current workstation standard IEEE 802.3u

– 100BaseSX – 100Mb over Multi Mode fibre using 850nm drivers– 100BaseTX – 100Mb over two unshielded twisted pairs– 100BaseFX – 100Mb over Multi Mode fibre using 1310nm drivers

• 1Gb - Gigabit Ethernet – Server standard – Network Backbone standard

– 1000BaseT – 1000Mb over four unshielded twisted pair IEEE 802.3z– 1000BaseSX – 1000Mb over Multi Mode fibre– 1000BaseLX – 1000Mb over Single Mode fibre

• 10Gb - 10 Gig Ethernet – IEEE P802.3ae – Large Network Backbone standard

– 10GBaseSR – 10 Gig over MM using 850nm (300 meters)– 10GBaseLR – 10 Gig over SM using 1310nm (10Km) – 10GBaseER – 10 Gig over SM using 1550nm (40Km)– 10GBaseZR – 10 Gig over SM using 1550nm (80Km)

Ethernet Standards Family(Speed defined at Layer 2 of OSI Seven Layer Model)

• Link Failure feature – Unmanaged Media converter passes on management info (fibre failure) the only way it can – At Layer 1

• A Link Failure Media Converter will stop transmitting light if it

does not receive a live Ethernet copper port.

• A Link Failure Media Converter will drop its 10/100 port if it

does not receive signal on fibre.

Media Converter Link Failure

Missing Link – How is it useful?

Managed SwitchMedia

ConverterMedia

Converter SwitchRest ofNetwork

Without Missing Link

Network Management system reports link OK

Network Management system reports link down

Managed SwitchMedia

ConverterMedia

Converter Switch

With Missing Link

Rest ofNetwork

Set the Managed switch port to fixed 100Mb FD

Set the Managed switch port to fixed 100Mb FD

www.telsey.com – [email protected]

Pluggable Optical ModulesGBICs & SFPs

Telsey Pluggable Optical Modules

Telsey Pluggable Optical Modules

GBICGBIC SFPSFP

GigabitEthernet

GigabitEthernet

FastEthernetFast

Ethernet

GigabitEthernet

GigabitEthernet

FastEthernetFast

Ethernet

GB101 550m

GB102 10km

GB103 40km

GB104 80km

GB105 120km

GB101 550m

GB102 10km

GB103 40km

GB104 80km

GB105 120km

GB111 15km

GB112 40km

GB113 80km

GB111 15km

GB112 40km

GB113 80km

SP101 550m

SP102 10km

SP103 40km

SP104 80km

SP105 120km

SP101 550m

SP102 10km

SP103 40km

SP104 80km

SP105 120km

SP111 15km

SP112 40km

SP113 80km

SP111 15km

SP112 40km

SP113 80km

Telsey Pluggable Optical ModulesGBICs & SFPs

Telsey Pluggable Optical ModulesGBICs & SFPs

Part Number DescriptionGB101 GBIC 1000SX SC 850nm 550m max.1,25Gbps, Hot Swappable

GB102 GBIC 1000LX SC 1310nm 10km max.1,25Gbps, Hot Swappable

GB103 GBIC 1000LX SC 1310nm 40km max.1,25Gbps, Hot Swappable

GB104 GBIC 1000ZX SC 1550nm 80km max.1,25Gbps , Hot Swappable

GB105 GBIC 1000ZX SC 1550nm 120km max.1,25Gbps, Hot Swappable

Part Number DescriptionSP101 SFP 1000SX LC 850nm 550m max.1,25Gbps, Hot Swappable

SP102 SFP 1000LX LC 1310nm 10km max.1,25Gbps, Hot Swappable

SP103 SFP 1000LX LC 1310nm 40km max.1,25Gbps, Hot Swappable

SP104 SFP 1000ZX LC 1550nm 80km max.1,25Gbps, Hot Swappable

SP105 SFP 1000ZX LC 1550nm 120km max.1,25Gbps, Hot Swappable

Part Number DescriptionGB111 GBIC 100FX SC 1310nm 15km max.155Mbps, Hot Swappable

GB112 GBIC 100FX SC 1310nm 40km max.155Mbps, Hot Swappable

GB113 GBIC 100FX SC 1550nm 80km max.155Mbps, Hot Swappable

Part Number DescriptionSP111 SFP 100FX SC 1310nm 15km max.155Mbps, Hot Swappable

SP112 SFP 100FX SC 1310nm 40km max.155Mbps, Hot Swappable

SP113 SFP 100FX SC 1550nm 80km max.155Mbps, Hot Swappable

1.25G GBIC

1.25G SFP

155M GBIC

155M SFP

- Complete offer of GBICs & SFPs - Fibber modules for MMF and SMF

- Full range of distances from 220/550 m on MMF up to 120 km on SMF

- Compatible with Telsey switches but also with other vendors

www.telsey.com – [email protected]

Media Converters

Dual-Fiber Media ConvertersMF1xx= FastEthernet MCs

MG1xx= GigabitEthernet MCs

Single-Fiber Media ConvertersMS1xx= FastEthernet MCs

MS2xx= GigabitEthernet MCs

Media Converters

• Media Conversion allows the connection of different Ethernet Layer 1 cable types on the network

• Cost-effective way of adding fibre to an existing network

• Telsey Media Converters converts media and speed

Example of Media Conversion

Fibre link

UTPUTP

Switch Switch

MediaConverter

MediaConverter

Up to 120km

Up to 100mUp to 100m

Fibre link

UTP

Switch

MediaConverter

Media Converters

• Cost effective way to bridge the distance

• Variety on choices:• 10/100 Mbps• 1000 Mbps• Dual fibber or single fiber• Multi Mode or Single Mode fiber• Distances up to 120 km

• Applicable for:• Operators• Railways• Utilities like gas, water and electricity

suppliers• Government usage etc.

TelseyMedia Converters

TelseyMedia Converters

Dual-FiberDual-Fiber Single-FiberSingle-Fiber

GigabitEthernet

GigabitEthernet

FastEthernetFast

Ethernet

GigabitEthernet

GigabitEthernet

FastEthernetFast

Ethernet

MG100 seriesMG100 series MF100 seriesMF100 series MS200 seriesMS200 series MS100 seriesMS100 series

Telsey Media Converter Selector

Telsey Media Converters Portfolio

- 10/100TX to 100FX

- 10/100/100TX to 1000S/LX

- Dual and Single Fiber

- Up to 120km

- 19” Converter chasses

- 16 slots

-Redundant Power Suply Included !!!

Part Number Description

MF101 Media Converter 10/100TX to 100FX (SC MM 1310nm 2km) , int P.S.

MF102 Media Converter 10/100TX to 100FX (SC SM 1310nm 25Km), int P.S.




MF108 Media Converter 100FX (SC MM 1310nm 2km) to 100FX (SC SM 1310nm 25km -or- MM 1310nnm 2km), int. P.S.

MG101 Media Converter 10/100/1000T to 1000SX (SC MM 850nm 0,5km), int P.S.

MG102 Media Converter 10/100/1000T to 1000LX (SC SM 1310nm 10km), int P.S.

MG103 Media Converter 10/100/1000T to 1000LX (SC-SM 1310nm 25km), int P.S.



MG106 Media Converter 10/100/1000T to 1000LX (SC SM 1550nm 80km) , int P.S.

MG107 Media Converter 10/100/1000T to 1000LX (SC SM 1550nm 120km), int P.S.

MG108 Media Converter 1000SX (SC MM 1310nm 2km) to 1000SX (SC SM 1310nm 10km), int P.S.

MS101 Single-fiber Media Converter 10/100TX to 100FX (SC SM TX1310nm/RX1550nm 25km), int P.S.








MS201 Single-fiber Media Converter 10/100/1000TX to 1000LX (SC SM TX1310nm/RX1550nm 10km), int P.S.




RM16 Media Converter Centre 16 slots chassis 19” - 2U with redundant Power Supply (for MFs, MGs & MSs)

Media Converter Chassis

Dual-fiber Media Converters

Single-fiber Media Converters

Dual-Fiber Media Converters

Dual-Fiber link

UTPUTP

Switch Switch

MediaConverter

MediaConverter

Up to 120km


MF100 series Dual-Fiber, FastEthernet Media Converters

• 10/100BaseTX to 100BaseFX Media Converters• Dual-Fiber optical ports• Unmanaged Dual-port FastEthernet switch

rather than a traditional L1 converter• Fully compliant with IEEE:

802.3 10Base-TX, 802.3u 100Base-TX and FX Standard

• Store and Forward Switching Method• 100BaseTX port at 10/100 Mbps Auto-sensing and

Full/Half Duplex Auto-negotiation• Auto-Cross over for MDI/MDIX in TP port• 8K MAC addresses• Distances: up to 2Km with Multi-Mode fiber up to 120Km with Single-Mode fiber

• Compact size metal case• Internal power supply (The MF100 series could be plugged into RM16 Chassis)• Low dissipation• Complies with CE & FCC emission standard

• Cost-effective & Highly reliable device• Compatible with any other products featuring a 100BaseFX interface

Application:• Upgrade or extend existing 100BaseT or 10BaseT network into fiber network easily• Installation and operation of the MF100 Series is simple and straightforward

Dual-fiber, FastEthernet Media Converters

10/100TX (RJ45) to 100FX (SC)• MF101 MultiMode Fiber, 1310nm, Up to 2km • MF102 SingleMode Fiber, 1310nm, Up to 25km

• MF103 SingleMode Fiber, 1310nm, Up to 40km • MF104 SingleMode Fiber, 1310nm, Up to 60km

• MF105 SingleMode Fiber, 1310nm, Up to 120km

100FX (SC) to 100FX (SC) • MF108 MultiMode Fiber, 1310nm, Up to 2km SingleMode Fiber, 1310nm, Up to 25km

MG100 series Dual-Fiber, GigabitEthernet Media Converters

• 10/100/1000BaseTX to 1000BaseSX/FX Media Converters• Dual-Fiber optical ports• Unmanaged Dual-port GigabitEthernet switch


802.3 10Base-TX, 802.3u 100Base-TX, 802.3ab 1000Base-TX and FX Standard

• Store and Forward Switching Method• 1000BaseTX port at 10/100/1000 Mbps Auto-sensing and

Full/Half Duplex Auto-negotiation• Auto-Cross over for MDI/MDIX in TP port• 4K MAC addresses• Distances: up to 550m, Muli-Mode fiber, 850nm

up to 2km with Multi-Mode fiber, 1310nm up to 120Km with Single-Mode fiber, 1550nm

• Compact size metal case• Internal power supply (The MG100 series could be plugged into RM16 Chassis)• Low dissipation• Complies with CE & FCC emission standard


Application:• Upgrade or extend existing 1000BaseT, 100BaseT or 10BaseT network

into fiber network easily• Installation and operation of the MG100 Series is simple and straightforward

Dual-fiber, GigabitEthernet Media Converters

10/100/1000TX (RJ45) to 1000SX (SC)• MG101 MultiMode Fiber, 850nm, Up to 550m

10/100/1000TX (RJ45) to 1000LX (SC)• MG102 SingleMode Fiber, 1310nm, Up to 10km

• MG103 SingleMode Fiber, 1310nm, Up to 25km





100FX (SC) to 100FX (SC) • MG108 MultiMode Fiber, 1310nm, Up to 2km SingleMode Fiber, 1310nm, Up to 10km

Single-Fiber Bi-directional Media Converters

Single-Fiber link

UTPUTP

Switch Switch

MediaConverter

MediaConverter

Up to 120km


MS100 series Single-Fiber, FastEthernet Media Converters

• 10/100BaseTX to 100BaseFX 2-wavelength WDM Media Converters• Single-Fiber optical ports with Single-Fiber SC connector• Unmanaged Dual-port FastEthernet switch


802.3 10Base-TX, 802.3u 100Base-TX and FX Standard

• Store and Forward Switching Method• 100BaseTX port at 10/100 Mbps Auto-sensing and

Full/Half Duplex Auto-negotiation• Auto-Cross over for MDI/MDIX in TP port• 1K MAC addresses• Distances: 25km to 80Km on Single-Mode fiber

• Compact size metal case• Internal power supply (The MS100 series could be plugged into RM16 Chassis)• Low dissipation• Complies with CE & FCC emission standard


Application:• Upgrade or extend existing 100BaseT or 10BaseT network into fiber network easily• Installation and operation of the MS100 Series is simple and straightforward

Single-Fiber, FastEthernet, Bi-directional Media Converters

10/100TX (RJ45) to 100FX (SC)

25km pair• MS101 SingleMode Fiber, TX1310nm, RX1550nm, Up to 25km • MS102 SingleMode Fiber, TX1550nm, RX1310nm, Up to 25km




MS200 series Single-Fiber, FastEthernet Media Converters

• 10/100/1000BaseTX to 1000BaseSX/FX Media Converters• Dual-Fiber optical ports• Unmanaged Dual-port GigabitEthernet switch


802.3 10Base-TX, 802.3u 100Base-TX, 802.3ab 1000Base-TX and FX Standard

• Store and Forward Switching Method• 1000BaseTX port at 10/100/1000 Mbps Auto-sensing and

Full/Half Duplex Auto-negotiation• Auto-Cross over for MDI/MDIX in TP port• 1K MAC addresses• Distances: up to 20km

• Compact size metal case• Internal power supply (The MS200 series could be plugged into RM16 Chassis)• Low dissipation• Complies with CE & FCC emission standard


Application:• Upgrade or extend existing 1000BaseT, 100BaseT or 10BaseT network

into fiber network easily• Installation and operation of the MS200 Series is simple and straightforward

10/100/1000TX (RJ45) to 1000SX (SC)

10km pair MS201 SingleMode Fiber, TX1310nm, RX1550nm, Up to 10km MS202 SingleMode Fiber, TX1550nm, RX1310nm, Up to 10km

20km pair MS203 SingleMode Fiber, TX1310nm, RX1550nm, Up to 20km MS204 SingleMode Fiber, TX1550nm, RX1310nm, Up to 20km

Single-Fiber, GigabitEthernet, Bi-directional

Media Converters

RM16

• Media Converter Centre for MFs, MGs & MSs • 16 slots chassis• 19” - 2U with • Redundant Power Supply Included

Application:• To centralize in rack up to 16 MC blades with redundant power supply• Installation and operation of the RM16 Series is simple and straightforward

Example of media conversion deployment

Q&A

Thank You for Your attention!

Date post:	17-Jan-2016
Category:	Documents
Upload:	davida
View:	101 times
Download:	5 times

ENTERPRISE PRODUCTS GBICs, SFPs & Media Converters

Documents