2
Orgreave Drive Shefeld S13 9NR UK Tel: +44 (0)1253 390906 Fax: +44 (0)1253 300160 www.envirasponge.com [email protected] EnviraSpong e has been specially developed to provide a low-dust environment for surface preparation. What is EnviraSponge? EnviraSponge is a sponge-coated abrasive. When the EnviraSponge is propelled against a surface the sponge attens and exposes the abrasive which abrades or cleans the surface. On rebound the sponge expands back to its original size causing a vacuum inside the sponge which captures the dust particles. The EnviraSponge is recycled using a regrader which removes dust and other foreign particles. EnviraSponge capture s the dust at the source of generation. It is recyclable and minimises waste generated during surface cleaning. Unlike conventional hard abrasives, which ricochet great distances with signicant retained energy, EnviraSponge transfers its energy upon contact by attening out. The main benets are: • Low Dust - Contaminants are contained at the source, resulting in less dust to collect - There is a signicantly reduced need for dust suppression and extraction. • Superior surface preparation in confned environments. • Keep your sensitive equipment protected. • Recyclable. • Improved operator visibility, meaning less re-work. • Greater operator safety - low abrasive rebound; low dust. • Reduce down-time - with a dust-free environment other trades can work simultaneously. • Dry surface preparation. • Replace mechanical cleanin g tools for faster and easier treatment of curved surfaces with a near-perfect nish. • Enhanced surface cleaning and chloride removal from steel. • Creates a surface prole of 5 - 100 microns on steel. EnviraSponge’s dust containment and its ability to perform dry make it well suited in a production environment. Increased productivity and reduced down-time can be achieved because EnviraSponge allows conned spaces to be cleaned without affecting sensitive equipment. Low Dus t Advanced Surfac e T reatment T echnology Media Generator
