epoxy resins and hardeners

EPIDIAN® CATALOGUE | 2019

epoxy resins and hardeners Intro

1

CIECH Sarzyna is a part of CIECH Group, and has been manufacturing resins and crop protection products for over 80 years. Now the company is one of the leaders of the Polish chemical market and an important international player, known for its flagship products POLIMAL® and EPIDIAN®.

Plastics portfolio of CIECH Sarzyna includes epoxy resins, saturated and unsaturated polyester resins, gelcoats, topcoats, phenol-formaldehyde resins, and hardeners.

The broad range of EPIDIAN® products includes:

resins and hardeners for flooring systems

resins and hardeners for composites

speciality protective coatings

pipe renewal systems

innovative solutions for pultrusion

solid epoxy resins for powder coatings

and liquid anticorrosion paints

resins for semi-finished goods.

legendtable of contentsPAGES

Intro

Table of Contents | Legend

Semifinished Products

Solid Epoxy Resins for Powder Coatings

Solid Epoxy Resins with Flow Control Agents

Modified Epoxy Resins for Anticorrosion Coatings

Injections, and Construction Laminates

Liquid Anticorrosion Paints, Can and Coil Coating

Composites

Speciality Resins

Adhesives

Resins for Electrical Insulations

Epoxy Flooring

Chemical Resistance of Epoxy Flooring Systems

Hardeners

Chemical Resistance of Selected

Epoxy Resin Compositions

1

2

3

4

5

6-7

8

9

9

10

11

12

13

14

17

2

SOLID EPOXY RESINS

LIQUID EPOXY RESINS

MODIFIED EPOXY RESINS

MODIFIED EPOXY RESIN SOLUTIONS

Semifinished Products

High chemical resistanceUniversal useEasy to modify

Solid, liquid, and modified epoxy resins for production of varnishes, prepregs, hot cure compositions, saturants, kits, adhesives etc.

ciechzywice.pl

3

Resin Properties ApplicationsEpoxy number

mol/100gViscosity

at 25 °C [mPa∙s] Gardner scale max

min max min max

EPIDIAN® 1 BPA-basedChemical resistant and electroinsulating varnishes Dry prepregs

0,180 0,230 - - 1

EPIDIAN® 1RBPA-based Narrow epoxide number range

Chemicaly resistant and electroinsulating varnishes

0,180 0,200 - - 2

EPIDIAN® 2 Rate of hydrolysis of chlorine - 1500 ppmHot cure compositions Wet prepregs

0,230 0,280 - - 2

EPIDIAN® 4BPA-based High viscosity

Kits and chemical resistant coatings Binders

0,410 0,450 - - 3

EPIDIAN® 5 BPA-based Binders and saturants Kits Impregnants

0,480 0,510 20 000 30 000 2

EPIDIAN® 6 BPA-based 0,510 0,540 10 000 15 000 1

EPIDIAN® 6DBPA-based Rate of hydrolysis of chlorine under 400ppm

Electronics – compositions with fillers 0,520 0,550 10 000 12 500 1

EPIDIAN® 6F BPA and BPF blend Chemical resistant paints and varnishes Binders and saturants Kits Impregnants Adhesives

0,540 0,570 6 000 9 000 3

EPIDIAN® 6F1BPA and BPF blend Lower viscosity vs EPIDIAN® 6F

0,550 0,590 4 500 6 500 3

Rich portfolio of resins for pure epoxy and hybrid powder coatings that are widely used for interior industrial applications, especially for anti-corrosion protection. Used to cover steel elements exposed to adverse conditions, in particular chemical substances e.g.: protection of tubes, valves, tanks, tools and automotive parts.

Resin Properties Applications

Weight equivalent

[g/mol]

Epoxy equivalent [mol/100g]

Softening temperature

[°C]

Viscosity in 40% BDG at 25 °C

[mPa-s]

min max min max min max min max

TYPE 1 EPIDIAN® MLB

Low bake resin Excellent flow properties Low viscosity

Pure epoxy powder coatings MDF applications

500 550 0,182 0,200 72 84 - 1 000*

TYPE 2

EPIDIAN® 010 ABPA-based Excellent flow properties

Type 1,5 for low temperature powder coatings Hybrid powder coatings Pure epoxy powder coatings

550 590 0,170 0,182 - - 230 280

EPIDIAN® 010BPA-based Flexible epoxide number

Type 2 epoxy resin with a wide range of applications, Powder coatings with high gloss and excellent flow properties

588 714 0,140 0,170 75 90 250 400

EPIDIAN® 010 B BPA-basedStandard resin for powder coatings with excellent flow properties

610 650 0,154 0,164 - - 270 360

EPIDIAN® 010 CBPA-based High gloss Excellent flow properties

Type 2,5 epoxy resin Powder coatings with high gloss and excellent flow properties

640 730 0,137 0,156 80 95 - -

TYPE 3

EPIDIAN® 011 CW

BPA-basedStandard resin for hybrid and pure epoxy powder coatings

700 750 0,133 0,143 90 98 360 480

EPIDIAN® 011 E 715 835 0,120 0,140 84 98 400 600

EPIDIAN® 011 715 835 0,120 0,140 85 98 300 500

EPIDIAN® 011 A 715 870 0,115 0,140 88 98 370 450

EPIDIAN® 031 M BPA-based Epoxy resin for hybrid powder coatings with improved overbake resistance

715 835 0,120 0,140 - - 2 500* 4 500*

EPIDIAN® 031BPA-based

Pure epoxy powder coatings 715 835 0,120 0,140 - - 2 500* 4 500*

EPIDIAN® 033 A Structural powder coatings 741 800 0,125 0,135 - - 3 100* 5 200*

TYPE 4

EPIDIAN® 012

BPA-basedStandard resin for pure epoxy powder coatings

800 1 000 0,100 0,125 93 105 450 750

EPIDIAN® 012I 770 840 0,119 0,130 - - 360 660

EPIDIAN® 012 U 877 952 0,105 0,114 93 105 - -

Outstanding mechanical resistanceExtraordinary chemical resistanceExcellent surface adhesionHighly durable final productMay be used for powder coatings with low curing temperatures

Solid Epoxy Resins for Powder Coatings

*at 150 °C

4

Resin Properties ApplicationsWeight equivalent

[g/mol]Epoxy equivalent

[mol/100g]

Softening temperature

[°C]

min max min max min max

TYPE2

EPIDIAN® 010 H-2Flexible epoxide number

Wide range of applications powder coatings with high gloss and excellent flow properties

625 715 0,140 0,160 75 90

EPIDIAN® 010 H-2,5 605 645 0,155 0,165 75 90

TYPE 3

EPIDIAN® 011 H-1

Improved flow properties of the final product

Standard resin for hybrid and pure epoxy powder coatings

715 830 0,120 0,140 84 98

EPIDIAN® 011 H-2 715 870 0,115 0,140 84 98

EPIDIAN® 011 A H-2 715 830 0,120 0,140 84 98

EPIDIAN® 011 H-2,5 715 870 0,115 0,140 84 98

EPIDIAN® 011 H-5 740 870 0,115 0,135 84 98

EPIDIAN® 011 H-10 770 910 0,110 0,130 84 98

Perfect for highly flexible coatings for household appliances, steel furniture, bicycles, toys etc. Ensure better flow properties of the final product that allows to obtain a thinner layer of the coating i.e. better product performance / lower production costs.

Solid Epoxy Resins with Flow Control Agents

Good mechanical resistanceHigh chemical resistanceExcellent surface adhesion

5

6

Resin Hardener Properties ApplicationsHardener ratio/

per 100 g of resin

Epoxy number [mol/100g]

Viscosity at 25 °C [mPa∙s]

min max min max

EPIDIAN® 450U1

Contains styrene Excellent fiberglass and fabric wetting

Kits and chemical resistant coatings30

0,3 0,4 800/20 1500/20TFF

May be applied in wet conditions and lower temperatures (>5 °C)

20

EPIDIAN® 505 Z-1 Excellent glass fiber and fabric wettingCompositions with fillers kits and chemical resistant coatings

10 - - - 1500

EPIDIAN® 601

U1 BPA based Laminates Solvent-free coatings Kits Putties Impregnants

45

0,5 0,55 700 1 100IDA Higher elasticity 50

TFFMay be applied in wet conditions and lower temperatures (>5 °C)

27

EPIDIAN® 624 IDA Potable water certifiedLaminates, protective coatings Injections, impregnants

50 0,48 0,51 600 800

EPIDIAN® 635 635 BPA-based Laminates 33 0,53 0,56 2 500 3 000

EPIDIAN® 652

IDA BPA/BPF blendLaminates Solvent-free coatings Kits Putties Impregnants

50

0,49 0,51 500 900TFF

May be applied in wet conditions and lower temperatures (>5 °C)

27

TFF 8020May be applied in wet conditions and lower temperatures (>5 °C) Lower viscosity

33

EPIDIAN® 653 IDA Higher viscosity vs EPIDIAN® 652Laminates, solvent-free coatings kits, putties, impregnants

50 0,5 0,53 800 1000

EPIDIAN® 655 U1 BPA-based Laminates, compositions with fillers 45 0,5 0,53 1 500 2 100

EPIDIAN® 659 Z1 BPA/BPF blend Laminates, solvent-free coatings kits, putties, impregnants 14 0,56 0,59 600 700

EPIDIAN® 6011

U1Low viscosity, Potable water certified May be used as a primer

Laminates Protective coatings Injections Impregnants

40

0,47 0,51 200 400TFF

May be applied in wet conditions and lower temperatures (>5 °C)

24

TFF 8020May be applied in wet conditions and lower temperatures (>5 °C) Lower viscosity

30

IDA Higher elasticity 50

EPIDIAN® 6012U1

BPA/BPF blendMultilayer laminates Adhesives

450,5 0,54 2 000 3 000

6012 PA 35

EPIDIAN® 6411 U1 BPA based Laminates - infusion, manual lamination 45 0,57 0,6 1 000 1 400

EPIDIAN® 11   Rate of hydrolysis of chlorine - 600 ppm Flame retardant

Laminates Prepregs

  0,18 0,23 300* 600*

Modified Epoxy Resins for Anticorrosion Coatings, Injections, and Construction Laminates

Resin Hardener Gel time at 20 °C 100 g sample [min]

Tensile strenght [Mpa]

Flexural strenght [MPa]

Baracol hardness [°B]

EPIDIAN® 601

IDA 50 45 70 -

U1 45 50 - 60 80 - 90 28 - 33

TFF 20 65 - 75 100 - 115 -

EPIDIAN® 607 IDA 60 35 70 -

EPIDIAN® 624IDA 40 30 55 3

TFF 20 60 90 -

EPIDIAN® 635 635 210 77 107 18

EPIDIAN® 652

IDA-4 180 25 65 - 75 15

IDA 50 30 60 15

TFF 8020 21 45 80 25

TFF 13 - - -

EPIDIAN® 653IDA 40 30 70 6

TFF 30 - - -

EPIDIAN® 6011

IDA 50 20 20 -

TFF 20 65 90 -

TFF 8020 16 50 90 30

EPIDIAN® 6291IDA 43 - 79,6 27

TFF 21 - 125 38

EPIDIAN® 6292IDA 44 - 90,5 28

TFF 21 - 136 41

A wide portfolio of resins used to produce elements in automotive and wind industries, ensuring the final product has outstanding mechanical, chemical, and weathering resistance.

High mechanical resistanceHigh weathering resistanceHigh chemical resistanceDurability of final product

High HDTDialectical propertiesZero shrinkage while curing

7

Properties of Selected Epoxy Resin Compositions for Laminates

Resins for chemical resistant paints and varnishes, mainly used to paint the walls (especially in halls and basements) that are exposed to chemical and mechanical loads as well as industrial steel elements that require anti-corrosion protection.

Resin Properties ApplicationsEpoxy number [mol/100g] Viscosity at 25 °C [mPa∙s]

min max min max

EPIDIAN® 1 BPA-basedChemical resistant and electroinsulating varnishes Dry prepregs

0,180 0,230 - -

EPIDIAN® 014 BPA-based

Can and coil coating

0,050 0,065 1 000 3 000

EPIDIAN® 014 LV BPA-based 0,065 0,075 800 2 200

EPIDIAN® 012 U BPA-based 0,105 0,114 - -

EPIDIAN® 6 BPA-based

Chemical resistant paints and varnishes

0,510 0,540 10 000 12 500

EPIDIAN® 6DBPA-based Rate of hydrolysis of chlorine under 400ppm

0,520 0,550 10 000 12 500

EPIDIAN® 6F BPA and BPF blend 0,540 0,570 6 000 9 000

EPIDIAN® 6F1BPA and BPF blend Lower viscosity vs 6F

0,550 0,590 4 500 6 500

EPIDIAN® 6FD BPA and BPF blend 0,560 0,580 4 000 5 000

EPIDIAN® 6X90 90% xylene solution 0,510 0,540 - -

EPIDIAN® 4X80 80% xylene solution 0,380 0,430 500 900

EPIDIAN® 24X80 80% xylene solution 0,300 0,340 3 400 7 100

EPIDIAN® 115 75% xylene solution 0,190 0,230 7 000 14 000

EPIDIAN® 115 I 75% xylene solution 0,210 0,220 7 000 14 000

EPIDIAN® 115 H 75% xylene solution 0,200 0,220 7 000 14 000

EPIDIAN® 115 LV75% xylene solution Lower viscosity vs EPIDIAN® 115 H

0,220 0,240 5 000 10 000

EPIDIAN® 145050% xylene and diacetone alcohol solution

Electrical insulating paints and varnishes Can and coil coating

0,050 0,080 800 1 500

EPIDIAN® 1X70 70% xylene solution

Chemical resistant paints and varnishes

0,190 0,240 - -

EPIDIAN® 1075X 75% xylene and MIBK solution 0,200 0,220 - -

EPIDIAN® 1075 75% MIBK solution 0,200 0,220 - -

EPIDIAN® 1XM70 70% xylene and MEK solution 0,200 0,220 2 000 3 000

Mechanical resistanceChemical resistanceExcellent adherence to surfacesShort cure time

8

Liquid Anticorrosion Paints, Can and Coil Coating

Composities

Speciality Resins

A range of resins for pultrusion, relining, and filament winding.

A selection of unique products for demanding applications, ranging from extreme anti-corrosion protection to stylish interior design solutions.

Outstanding mechanical resistanceGood fiber wettingDurability of final product

9

Resin Properties Applications

Epoxy number [mol/100g] Viscosity at 25 °C

[mPa∙s]

min max min max

EPIDIAN® 1300 Basic compositionComposite rods – pultrusion

0,540 0,570 7 000 9 000

EPIDIAN® 1301 Increased glass-transition temperature 0,540 0,570 7 000 9 000

EPIDIAN® 1134 Higher elasticity Safety nets – pultrusion 0,475 0,510 600 900

EPIDIAN® 5000 R Composition with mineral filler Pipe repair with relining method 0,545 0,560 1 500 2 500

EPIDIAN® 629 Excellent fiber wetting Laminates – filament winding 0,540 0,580 800 1 300

Resin Properties Applications

Epoxy number [mol/100g] Viscosity at 25 °C

[mPa∙s]

min max min max

EPIDIAN® DECO High transparencyFurniture and other elements of interior design

0,490 0,520 600 800

EPIDIAN® 653-3Low viscosity Excellent penetration

Protection of concrete and metal surfaces Putties and epoxy mortars

0,500 0,530 800 1 000

EPIDIAN® 6200Good adhesion to bituminous masses (asphalts)

Anti-slip flooring 0,390 - 2 000 4 000

             

Resin Properties Applications Amount of fillers % Density at 20 °C, mPas

EPIDIAN® 6250High abrasion resistance Enables spray application

Renovation and protection of surfaces exposed to chemical corrosion

52 - 56 1,65 - 1,75

Adhesives

Very good adhesionExcellent mechanical resistanceGood chemical resistanceZero shrinkage while curing

A variety of two-component resin based adhesives used in construction, electrotechnics, for anti-corrosion linings, to bond metal, glass, ceramics, and other materials.

Resin Hardener Properties Applications

Hardener ratio/per 100 g of

resin

Gel time of compound, temp. 20 °C

sample 100 g [min]

Epoxy number [mol/100g]

Viscosity at 25 °C [mPa s]

min max min max

EPIDIAN® 5

Z-1 High viscosity

Adhesives for metal, glass, ceramics, and plastics

12 33

0,48 0,5120 000 30 000

IDA Higher elasticity 50 40

PACHigh elasticity (depending on the amount of hardener)

60-100 180 10 000 25 000

EPIDIAN® 53

Z-1 Low viscosity

Adhesives for metal, glass, and ceramics

10 60

0,41 - 900* 1 500*TFF

May be applied in wet conditions and lower temperatures (>5 °C) Shorter cure time

22 30

EPIDIAN® 57

Z-1

Medium elasticity High viscosity High shear and peeling resistance Adhesives for metal, glass, ceramics,

and leather

10 40

- - 13 000 19 000

TFF

May be applied in wet conditions and lower temperatures (>5 °C) Shorter cure time

22 22

EPIDIAN® 62Z-1 Medium viscosity Adhesives for metal, glass, ceramics,

for structural and electronic castings10 50

0,39-

4 000* 6 500*IDA Increased elasticity 40 80 -

EPIDIAN® 431 U1 High chemical resistance Adhesive, grout 10 - - - - -

EPIDIAN® 622 Z-1 White glue Adhesive for metal and glass 12 180** 0,5 0,55 800 1 300

EPIDIAN® 100 -One-component epoxy glue, cured at >120 °C

Adhesive for metal, glass, and ceramics - - - - - -

*at 20 °C**10 g sample

10

Resins for Electrical Insulations

Mainly used for electrical and electronic applications for encapsulation of components and production of parts of electrical devices.

Dialectical propertiesWater and moisture resistanceChemical resistanceHigh weathering resistanceHigh HDT

Resin Hardener Properties Applications Hardener ratio/per 100 g of resin

Gel time of compound,

temp. 20 °C sample 100 g [min]

Epoxy number [mol/100g]

Viscosity at 25 °C [mPa∙s]

min max min max

EPIDIAN® 52 Z-1 Low viscosityElectrical insulation Fiberglass laminates

13 40 0,51 0,55 400 800

EPIDIAN® 53

Z-1 Basic composition

Electrical insulation Fiberglass laminates

10 60 0,41 -

900* 1 500*TFF

May be applied in wet conditions and lower temperatures (>5 °C) Shorter cure time

22 30 - -

EPIDIAN® 62

Z-1 Basic composition

Electrical insulation

10 50 0,39  

4 000* 6 500*IDA Higher elasticity 40 80 - -

EPIDIAN® 590 IDA-4Pigmented composition with mineral fillers

Electrical insulation 20 210** - - - -

*at 20 °C**10 g sample

ciechzywice.pl

11

Epoxy FlooringA range of resins for a variety of epoxy flooring solutions, including but not limited to thin epoxy flooring, self-levelling epoxy flooring, flooring with acrylic flakes, quartz sand, grit etc. Available in 10 basic RAL colours. Other compositions available upon request.

EPIDIAN® Hardener Properties Applications

Hardener ratio/per 100 g of

resin

Gel time of compound, temp. 20 °C sample 100

g [min]

Epoxy number [mol/100g]

Viscosity at 25 °C [mPa∙s]

Density at 20 °C [g/cm3]

min max min max

FLOOR C1 U1

Designed for thin (0.15-0.5 mm) coloured epoxy flooring Provides an excellent coverage and jointless finish Boasts extra high abrasion resistance (BCA AR 0.5) Ensures high chemical resistance and good mechanical resistance May be applied on walls or other vertical surfaces Can be applied by spraying onto horizontal surfaces Water resistant Does not contain nonylphenol

Bays and aisles in industrial plants Garages and bus depots Technical rooms in offices and schools Warehouses, dairies, breweries Food processing plants Staff facilities Sterile rooms in pharmaceutical plants

25 - - - 2 000 4 000 1,35-1,65

FLOOR S1 U1

Designed for self-levelling (1-5 mm) epoxy flooring Provides a jointless high-gloss surface finish Boasts extra high abrasion resistance (BCA AR0.5) Ensures high chemical resistance and high mechanical resistance Recommended for decorative flooring designs Water resistant Does not contain nonylphenol

Bays and aisles in industrial plants Garages and bus depots Technical rooms in offices and schools Warehouses, dairies, breweries Food processing plants Staff facilities Sterile rooms in pharmaceutical plants Housing Stately buildings, museums and galleries

25 - - - 1 500 3 000 1,30-1,60

FLOOR G1 U1 Low viscosity

Good penetration

Primer for epoxy flooring solutions including but not limited to the ones based on EPIDIAN® C1, EPIDIAN® S1, and EPIDIAN® 6293 with grit (DRAINAGE FLOORING SYSTEM)

40 80 0,470 0,510 300 400 1,05-1,15

FLOOR G2

U1 Primers for quartz sand epoxy flooring

Primer, main coat and top coat of EPIDIAN® FLOOR Q and QF or any other quartz sand based epoxy flooring solution Primer for any concrete surfaces

40 50 0,488 0,513 500 900 -

MTB Lower application temperature Shorter cure time

Primer, main coat and top coat of EPIDIAN® FLOOR Q and QF or any other quartz sand based epoxy flooring solution Primer for wet concrete surfaces

37 25 - - - - -

TOP FINISH

TOP FINISH Increased UV resistance Top coat for epoxy flooring based on

grit or acrylic flakes 40 30 0,475 0,510 450 750 -

6293 6293 Increased UV resistance Construction resin for DRAINAGE FLOORING SYSTEM or any other grit-based solution 45 30 0,525 0,56 1000 1300 -

Water resistanceHigh HDTLow shrinkage

Excellent adherence to horizontal and in some cases even to vertical surfacesGood mechanical resistanceGood chemical resistance

12

Chemical Resistance of Epoxy Flooring Systems

very good resistanceaverage resistance

lack of resistanceplate slightly yellowed

  EPIDIAN® FlOOR S1 + Hardener U1 EPIDIAN® FlOOR C1 + Hardener U1

Factor 24 h 3 days 7 days 14 days 28 days 24 h 3 days 7 days 14 days 28 days

Tap water

Sodium hydroxide 10%

Sodium hydroxide 30%

Sodium hydroxide 45%

Sulphuric acid 20%

Concentrated hydrochloric acid

Hydrochloric acid 10%

Nitric acid 10%

Phosphoric acid 10%

Acetic acid 5%

Citric acid 10%

Salt 20%

Ammonia 10%

Perhydride 3%

Xylene

Toluene

Ethanol 96%

Ethanol 45%

Diesel oil

Gasoline

Acetone

Ethyl acetate

Sodium hypochlorite 17%

13

*acid value

Hardeners

14

A full range of hardeners for epoxy resins. Choose your perfect:

Viscosity Reactivity Elasticity Application temperature

Transparency Curing time UV resistance

Hardener Properties ApplicationsViscosity at 25 °C [mPa∙s] Amine number [mg KOH/g]

min max min max

635 Hardener for laminates / filament windingIncreased adhesion

Composites Civil engineering

10 15 480 530

635-1

Hardener for filament windingIncreased adhesion Does not contain benzyl alcoholLower viscosity vs 635

8 15 500 600

5000R Hardener for pipe repair with relining methodCompositesCivil engineeringPipeline repair

8 15 550 570

6412Hardener for laminates / infusionHighly transparentHigh gloss

CompositesCivil engineering - - 520 60

Hardener Properties ApplicationsViscosity at 25 °C [mPa∙s] Acid Value [mg KOH/g]

min max min max

1300 Anhydride Hardener for pultrusion Composites 25 50 300* 400*

134AnhydrideHot curing hardenerIncreased reactivity

Electric insulation 1 500 5 000 300* 400*

Composites

to get the best possible results.

*at 75 °C

Hardener Properties ApplicationsViscosity at 25 °C [mPa∙s] Amine number [mg KOH/g]

min max min max

PAT 115

Universal hardeners and xylene solutions for paints and varnishesAnticorrosion paints and varnishes Protective coatings

2 750* 3 700* 200 230

PA 115 3 500* 4 600* 210 250

PA 115 X 70 750 1 400 145 180

PAT 115/70X 1 500 3 000 150 180

PAA 70 Polyamide adduct 70% solution Xylene solution for paints and varnishes 5 000 13 000 140 180

Paints and Varnishes

15

Hardener Properties ApplicationsViscosity at 25 °C [mPa∙s] Amine number [mg KOH/g]

min max min max

PF Good elasticityMedium reactivity

Chemoresistant adhesivesPuttiesCoatings

8 000 20 000 350 400

PACHigh adhesionGood elasticityLow reactivity

AdhesivesAdhesive connections of high elasticity 10 000 27 000 290 360

Increased Elasticity

Hardener Properties ApplicationsViscosity at 25 °C [mPa∙s] Amine number [mg KOH/g]

min max min max

MTB

Universal hardener for epoxy resins Enables hardening in low temperatures (down to 0 °C) Moisture resistant Fast curing time Does not cause blooming

Epoxy flooringCompositesCivil engineeringAdhesivesManual lamination

180 280 300 450

TOP FINISH

Hardener for TopFinish System - a top coat for natural stone carpetHigh glossIncreased UV resistance

Epoxy flooring 250 350 350 400

U1Universal hardener for epoxy flooringHigh glossIncreased moisture resistance

Epoxy flooringComposites 100 200 370 430

6293High glossIncreased elasticityIncreased UV resistance

Road constructionCivil engineeringEpoxy flooring

250 350 350 400

IDA-2 Universal hardener for epoxy flooringHigh gloss

Epoxy flooringPutties 230 380 360 420

KTHigh glossIncreased moisture resistanceLow viscosity

Civil engineeringEpoxy flooring 80 120 250 350

Flooring

Hardener Properties ApplicationsViscosity at 25 °C [mPa∙s] Amine number [mg KOH/g]

min max min max

DECOHighly transparentHigh glossLong lasting finish

FurnitureInterior design

250 250 350 400

DECO-K

Highly transparentHigh glossLong lasting finishFor thick layers and elements

- - 450 490

Interior Design

16

Speciality

Hardener Properties ApplicationsViscosity at 25 °C [mPa∙s] Amine number [mg KOH/g]

min max min max

IDA-4Xycloaliphatic adduct, nonylphenol freeHigh elasticityLong lasting finish

Electric insulation - - 380 240

653-3Modified cycloaliphatic adductIncreased moisture resistanceDoes not cause blooming

Cvil engineering (antitorrosion systems) 120 250 290 350

6200Polyamide, UTW modificationHigher elasticity Good adhesion to bituminous masses (asphalt)

Road constructionCivil engineering Adhesives

1 000 2 000 500 650

6012Modified polyaminoamideHigh adhesion,Increased elasticity

Civil engineeringSports equipmentAdhesives

1 200 2 200 500 600

1KZModified polyaminoamideIncreased elasticityReduced reactivity

Abrasive materialsConstruction 500 1 000 200 400

Hardener Properties ApplicationsDensity at 20 °C [mPa∙s] Amount of fillers %

min max min max

6250

Modified cycloaliphatic adductFilled hardenerHigh chemical resistance May be used for spray application

Civil engineering (antitorrosion systems) 1,38 1,48 45 47

Universal Hardeners

Hardener Properties ApplicationsViscosity at 25 °C [mPa∙s] Amine number [mg KOH/g]

min max min max

Z-1 Triethylenetetramine (TETA) Basic hardener

Adhesives Civil engineering Composites

20 30 1 100 -

IDAIsophorone diamine adductPotable water certified hardener (COBRO certificate and PZH certificate for usage with EPIDIAN® 6011 and EPIDIAN® 624)

CompositesAdhesivesPaints and varnishes

150 300 200 350

TFFMannich alkali based on phenol Universal hardener that enables curing epoxy solutions in low temperatureshigh reactivity

Epoxy flooringAdhesivesLaminates

5 000 10 000 500 700

TFF 8020

Polyamide Universal hardener that enables curing epoxy solutions in low temperatures High reactivity Lower viscosity vs TFF

Epoxy flooring PuttiesCoatings

700 2 200 350 600

Chemical Resistance of Selected Epoxy Resin Compositions

Very good resistance (minimal matting)Avarage resistance (minor discoloration and/or minimal matting)

Non-resistant (major discoloration, structural damage)Fittings got damaged No data

17

Resin Hardener

Wat

er

Sodi

um h

ydro

xide

u 10

-45%

Hyd

roch

loric

aci

d 10

%

Conc

entr

ated

hyd

roch

loric

aci

d

Sulp

huric

aci

d 20

%

Phos

phor

ic a

cid

10%

Nitr

ic a

cid

10%

Acet

ic a

cid

5%

Citr

ic a

cid

10%

Sodi

um c

arbo

nate

10%

Salt

20%

Etha

nol 4

5%

Etha

nol 9

6%

Tolu

ene

Xyle

ne

Acet

one

Gas

olin

e

Die

sel

Perh

ydrid

e 3%

Ethy

l ace

tate

Am

mon

ia 1

0%

EPIDIAN® 5Z-1                                          IDA                                          

EPIDIAN® 6Z-1                                          IDA                                          

EPIDIAN® 52 Z-1                                          EPIDIAN® 53 Z-1                                          

EPIDIAN® 6011TFF                                          IDA                                          

EPIDIAN® 601TFF                                          

IDA                                          

EPIDIAN® 607Z-1                                          KT                                          

EPIDIAN® 624IDA                                          

TFF                                          

EPIDIAN® 431 U1                                          

EPIDIAN® 57 Z1                                          

Contacts

ciechzywice.pl

Arletta WronaKey Account ManagerArletta.Wrona@ciechgroup.com Tel.: +48667770377

ITALY | SWITZERLAND | FINLANDSWEDEN | NORWAY | DENMARK

Szymon SzpakBusiness Development ManagerSzymon.Szpak@ciechgroup.com Tel.: +48609125507

CZECH REPUBLIC | SLOVAKIA | HUNGARYGREECE | TURKEY | CROATIA | SERBIAMACEDONIA | ROMANIA

Jan StrzałkowskiBusiness Development ManagerJan.Strzalkowski@ciechgroup.com Tel.: +48500213965

GREAT BRITAIN | IRELAND | BENELUXSPAIN | PORTUGAL | USA | CANADAUAE | ASIA | ISRAEL | AFRICA

Rajmund PlawgoSales ManagerRajmund.Plawgo@ciechgroup.com Tel.: +4815233716750

GERMANY | AUSTRIA

Helena SiwekSales ManagerHelena.Siwek@ciechgroup.com Tel.: +48669606369

RUSSIA | LITHUANIA | LATVIA ESTONIA | KAZAKHSTAN

Damian HalasaTechnical Sales ManagerDamian.Halasa@ciechgroup.com Tel.: +48669600233

POLAND

Piotr MajderTechnical Sales ManagerPiotr.Majder@ciechgroup.com Tel.: +48667948316

POLAND

Yuriy DolgykhSales ManagerYuriy.Dolgykh@ciechgroup.com Tel.: +380956484047

UKRAINE | BELARUS