Date post: | 01-Jun-2018 |
Category: |
Documents |
Upload: | sleiman-shokr |
View: | 224 times |
Download: | 0 times |
8/9/2019 Erection of a Stainless-steel Tank for Storing a Phosphoric Acid
http://slidepdf.com/reader/full/erection-of-a-stainless-steel-tank-for-storing-a-phosphoric-acid 1/6
METALURGIJA 46 (2007) 3, 173-178 173
=111
ERECTION OF A STAINLESS-STEEL TANK FOR STORING A PHOSPHORIC ACID
INTRODUCTION
3
-
DESCRIPTION OF THE STRUCTURE
- 3
A storage tank for 93 % phosphoric acid was built in Luka Koper from 7 mm thick ground hot-rolled plates of
316L stainless steel. The capacity of the storage tank is of the 750 m3, diameter of 11 m and the height of 8,2
m. The shell plates were welded manually using the shielded metal-arc and gas-metal-arc processes. Before
the erection, welding procedure tests according to EN 288-3 were carried out. During the construction several
non-destructive examination methods were used, such as radiographic testing and visual and liquid penetrant
examination. After the entire tank and roof structure were completed, a hydrostatic leak test was carried out.
The surfaces of all the welds on the internal surface of the vessel were ground and the roughness was checkedon site. The surfaces of the base material and the ground welds were passivated and tested for resistance to
corrosion with electrochemical measurements.
Key words: stainless steel, phosphoric acid, cylindrical storage tank, welding
Volumen rezervoara je 750 m3, promjer 11 m i visina plašta 8,2 m. Za zavarivanje plašta rezervoara je korišten
-
je izveden hidrotest rezervoara. Sve površine zavara na unutarnjoj površini rezervoara su obrušene i polirane,
a potom je provjerena hrapavost. Površine osnovnog materijala i obrušeni zavari su pasivizirani te ispitani na
3
8/9/2019 Erection of a Stainless-steel Tank for Storing a Phosphoric Acid
http://slidepdf.com/reader/full/erection-of-a-stainless-steel-tank-for-storing-a-phosphoric-acid 2/6
METALURGIJA 46 (2007) 3, 173-178
-
-
STORAGE TANK CALCULATION
-
-
g = 17,8
3,
2),
g 3,
D
H p
H m
G = 1,78
3,
t
CA T S
d = 137
2,
S
t 2,
3.
.
i
d
d
H Gt CA
S
(1)
.
i
t
t
H t
S
(2)
-
3.
8/9/2019 Erection of a Stainless-steel Tank for Storing a Phosphoric Acid
http://slidepdf.com/reader/full/erection-of-a-stainless-steel-tank-for-storing-a-phosphoric-acid 3/6
METALURGIJA 46 (2007) 3, 173-178
H p
H
i -
t
d
t d
t t
t t
t
-
-
THE BASE MATERIAL
- -
-
2O
3
-
-
8/9/2019 Erection of a Stainless-steel Tank for Storing a Phosphoric Acid
http://slidepdf.com/reader/full/erection-of-a-stainless-steel-tank-for-storing-a-phosphoric-acid 4/6
METALURGIJA 46 (2007) 3, 173-178
-
-
WELDED JOINTS
-
-
-
8/9/2019 Erection of a Stainless-steel Tank for Storing a Phosphoric Acid
http://slidepdf.com/reader/full/erection-of-a-stainless-steel-tank-for-storing-a-phosphoric-acid 5/6
METALURGIJA 46 (2007) 3, 173-178 177
-
-
-
ASSEMBLY OF THE STORAGE TANK
8/9/2019 Erection of a Stainless-steel Tank for Storing a Phosphoric Acid
http://slidepdf.com/reader/full/erection-of-a-stainless-steel-tank-for-storing-a-phosphoric-acid 6/6
METALURGIJA 46 (2007) 3, 173-178178
REFERENCES
- 3
RMZ-mater. geoenviron.
3
-
- 1328.
-
CONCLUSION
-
-
-
-
-