Esate_Pricebook_09

estate lock

Technical SpecificaTionSand price liST

april 2009

All Lifetime finishes are not alike. The Baldwin Lifetime Finish uses a sophisticated formulation

of layered alloys to create crisp detailing, brilliantly pure color,

and outstanding resistance to corrosion—particularly in salt

air environments.

> Made with patent-protected technology that interrupts the aging process

> Available in Polished Brass, Polished Nickel and Satin Nickel Lifetime finishes.

baldwin lifetime finishes

003Lifetime (PVD)Polished Brass

030Polished

Brass

112*VenetianBronze

412*Distressed

Venetian Bronze

102Oil Rubbed

Bronze

402Distressed

Oil Rubbed Bronze

151*AntiqueNickel

452*Distressed

Antique Nickel

150SatinNickel

056Lifetime (PVD)

Satin Nickel

055Lifetime (PVD)Polished Nickel

060*Satin Brass

& Brown

038*AgedBrass

050*Satin Brass

& Black

190SatinBlack

260PolishedChrome

TieR 1 TieR 2

DiSTReSSeD fiNiSheS:Not all hardware is available Distressed. The rugged tumbling process would damage some components. In cases where distressing is not possible, the equivalent non-distressed finish will be provided.412 = 112402 = 102452 = 152 Antique Nickel with Matte laqcuer (151 has gloss laqcuer)Hardware NoT available distressed includes:> All mortise locks, cylinders, latches, strikes> Certain levers & handleset trim (noted on those pages)

estate finishes

TieR 1 TieR 2

hAND-ReLieVeD fiNiSh VARiANCeS:(038, 050, 060, 112, 151, 412, 452) Product finishes which are HAND RELIEVED may vary in luster, hue and appearance as a result of handcrafted variances in the final finishing step.

324Satin

Stainless Steel

320Polished

Stainless Steel

TieR 1 fiNiSheS:STAiNLeSS STeeL hARDwARe ONLy

BALDwiN exCLuSiVe*

BALDwiN exCLuSiVe*

*

031Non-lacquered

Brass

uS # BhMA #

030 = 3 605

031 = 3NL –

040 = 4 606

050 = 5 609

060 = 6 608

102 = 10B 613

150 = 15 619

190 = 19 622

260 = 26 625

264 = 26D 626

324 = 32D 630

Baldwin#

264Satin

Chrome

040SatinBrass

033VintageBrass

034Lacquered

VintageBrass

authentic styles for every room of every home

front door every room

kitchen & bath

a sampling of our federal collection

BACkSeT DOORThiCkNeSS

fuNCTiON MORTiSeLOCk

hANDiNg PART NuMBeR hANDiNg PART NuMBeR PART NuMBeR PART NuMBeR

2.75˝ 1.75˝ and up Residential Entrance 6020 R 6020.xxx.R RLS 6020.xxx.RLS 6001.xxx.R 6001.xxx.RLS

L 6020.xxx.L LLS 6020.xxx.LLS 6001.xxx.L 6001.xxx.LLS

RR 6020.xxx.RR RRLS 6020.xxx.RRLS 6001.xxx.RR 6001.xxx.RRLS

LR 6020.xxx.LR LRLS 6020.xxx.LRLS 6001.xxx.LR 6001.xxx.LRLS

2.75˝ 1.75˝ and up Residential Entrance Emergency Egress

6021 R 6021.xxx.R RLS 6021.xxx.RLS 6075.xxx.R 6075.xxx.RLS

L 6021.xxx.L LLS 6021.xxx.LLS 6075.xxx.L 6075.xxx.LLS



2.5˝ 1.375˝require 1˝ front

Residential Entrance 6320 R 6320.xxx.R RLS 6320.xxx.RLS 6301.xxx.R 6301.xxx.RLS

1.75˝ and up L 6320.xxx.L LLS 6320.xxx.LLS 6301.xxx.L 6301.xxx.LLS



2.5˝ 1.375˝– require 1˝ front

Residential Entrance Emergency Egress

6321 R 6321.xxx.R RLS 6321.xxx.RLS 6375.xxx.R 6375.xxx.RLS

1.75˝ and up L 6321.xxx.L LLS 6321.xxx.LLS 6375.xxx.L 6375.xxx.LLS



1. Pick your Trim

2. Pick your Mortise Lock

3. Pick your Cylinder

MORTiSe LOCkS

Suffix* Minus Strike*Right hand .R .RDTLeft hand .L .LDTRight hand Reverse bevel .RR .RRDTLeft hand Reverse bevel .LR .LRDTRight hand Lever strength .RLS .RLSDTLeft hand Lever strength .LLS .LLSDTRight hand Reverse bevel Lever strength .RRLS . RRLSDTLeft hand Reverse bevel Lever strength .LRLS . LRLSDT

030, 031, 033 038, 040, 050 060, 102, 112 003 150, 151, 152 055Description 190, 260, 264 056

Residential Mortise Locks (shown above) $299 317

Mortise Locks Minus Strike (.DT) $277 292– must then order strike separately

Mortise Locks NOT available in 030 or Distressed finishes, non-distressed equivalents 402=102, 412=112, 452=152

hOw TO ORDeR – eNTRANCe SeTS

if yOuR DOOR iS NOT 1.75˝ ThiCk, also required:

4. Spindle (see Chart)

5. Thick Door kit (doors over 1.75˝ and up to 2.25˝ thick)

6. extended Lip Strike

> Specify handing with 1-6 digit Suffix* after finish designation > Baldwin mortise locks are reversible in the field if needed WARNINg: Do NoT USE lever strength mortise locks with knobs They only turn one way and have a stiff turning action suitable for levers

030, 031, 033 038, 040, 050 060, 102, 112 003 150, 151, 152 055Item # Description 190, 260, 264 0566037.xxx.XXXX 2.75˝ backset latch, deadbolt, aux latch6038.xxx.XXXX 2.75˝ backset latch only6039.xxx.XXXX 2.75˝ backset latch, deadbolt $60 626338.xxx.XXXX 1.5,̋ 2,̋ 2.5˝ backset latch only6339.xxx.XXXX 1.5,̋ 2,̋ 2.5˝ backset latch, deadbolt6897.xxx.XXXX 1.5,̋ 2,̋ 2.5˝ backset, RABBeTeD strike 98 103 Not available for 2.75˝ backset, See beginning of mortise section for detailed specs

.XXXX indicates Extended Lip to Center size = .R158, .L158, .R178, .L178, .R214, .L214, .R300, .L300

6037, 6038, 6039, 6338, 6339.xxx – exTeNDeD LiP STRikeS (hANDeD)> Use with locks installed on special door/frame conditions> Supplied with a curved lip only> ALWAYS SPECIFY HAND oF DooR AND REQUIRED LENgTH> Lip to Center lengths: .R158 or .L158 – 1.625˝ (41mm) .R178 or .L178 – 1 7/8˝ (48mm) .R214 or .L214 – 2.25˝ (57mm) .R300 or .L300 – 3˝ (76mm)

Lip to Center length determined by the following formula: Door thickness ÷ 2 + .375˝ (10mm) = Lip to Center lengthRound to closest size

exTeNDeD LiP STRikeS

hANDLeSeT x kNOB hANDLeSeT x LeVeR LeVeR x LeVeRkNOB x kNOB

Kit For Entrance Trim No.

6501.000.A 6540, 6541, 6543, 6549, 6556, 6557, 6560, $4 6564, 6565, 6567, 6568, 6570, 6571, 6572, 6573, 6931,6937, 6946, 6948, 6950, 6963, 6976 active & dummy

6501.000.B 6548, 6562, 6563, 6910, 6949 active & dummy 18

6501.000.C 6944, 6952, 6999 active & dummy 26

6501.000.D 6542, 6544, 6545 ACTIVE oNLY 14

6501.000.E 6542, 6544, 6545 DUMMY oNLY 20

6501.000.F 6966 oNLY 23

ReQuiReD for all doors over 1.75˝ and up to 2.25˝ thickThick Door Kits are for Handlesets oNLY, not Entrance Sets (Entrance sets are knob x knob or lever x lever)

ThiCk DOOR kiTS – hANDLeSeTS ONLy

SPiNDLeS

for doors thicker than 2.25˝, please call Customer Service:

800.437.7448 8AM – 5PM eST . fAx.800.255.9785

Spindle key

Straight Spindles – PASSAgE

Item # Description Size

0509.004 Broached straight 3˝

0510.004 Broached straight 3.5˝


0512.004 Broached straight 4.5˝ $100513.004 Broached straight 5˝




Swivel Spindles – PRIVACY


0519.004 Broached swivel 3˝

0520.004 Broached swivel 3.5˝

0521.004 Broached swivel 4.5˝ $140522.004 Broached swivel 4˝



Half Spindles – FRoNT DooR (thumbpiece to knob or lever)


0530.004 Broached half 2.375˝

0531.004 Broached half 2.875˝ $100532.004 Broached half 3.375˝



fRACTiON DeCiMAL1/16˝ .0625˝1/8˝ .125˝3/16˝ .1875˝1/4˝ .25˝5/16˝ .3125˝3/8˝ .375˝7/16˝ .4375˝1/2˝ .5˝9/16˝ .5625˝5/8˝ .625˝11/16˝ .6875˝3/4˝ .75˝13/16˝ .8125˝7/8˝ .875˝

DeCiMAL fRACTiON ChART

3.5˝

3.5˝

3.5˝

3.5˝

3.5˝

4˝

4˝

4.5˝

5˝

5˝

SPiNDLe ChART

1.375˝ 1.75˝ 2˝ 2.25˝ 2.5˝

Lock Trim Thickness

Spindle halfSpindle

DoorThickness:

A – .0625˝

B – .0937˝

C – .125˝

D – .1875˝

e – .25˝estate Roses

f – .3125˝

g – .375˝

h – .435˝

i – .56˝

J– .75˝

2.25˝

2.25˝

2.25˝

2.25˝

2.25˝

2.25˝

2.25˝

2.25˝

2.25˝

2.625˝

4˝

4˝

4˝

4˝

4˝

4.5˝

4.5˝

4.5˝

5˝

5.5˝

Spindle halfSpindle

2.25˝

2.25˝

2.25˝

2.25˝

2.25˝

2.25˝

2.25˝

2.375˝

2.375˝

2.875˝

4˝

4˝

4.5˝

4.5˝

4.5˝

5˝

5˝

5˝

5.5˝

5.5˝

Spindle halfSpindle

2.25˝

2.25˝

2.25˝

2.25˝

2.25˝

2.375˝

2.375˝

2.375˝

2.625˝

2.875˝

4.5˝

4.5˝

4.5˝

4.5˝

5˝

5˝

5.5˝

5.5˝

6˝

6˝

Spindle halfSpindle

2.25˝

2.25˝

2.25˝

2.375˝

2.375˝

2.375˝

2.875˝

2.625˝

2.625˝

2.875˝

4.5˝

5˝

5˝

5˝

5˝

5˝

5.5˝

5.5˝

6˝

6˝

Spindle halfSpindle

2.375˝

2.375˝

2.375˝

2.375˝

2.875˝

2.875˝

2.875˝

2.875˝

2.875˝

2.875˝

for doors thicker than 2.25˝, please call Customer Service:

800.437.7448 8AM – 5PM eST . fAx.800.255.9785

030, 031, 033 038, 040, 050 060, 102, 112 003 150, 151, 152 055Item # Description 190, 260, 264 0568321.xxx 1˝ Mortise Cyl.8322.xxx 1.125˝ Mortise Cyl.8323.xxx 1.25˝ Mortise Cyl. $43 468324.xxx 1.375˝ Mortise Cyl.8325.xxx 1.5˝ Mortise Cyl.8326.xxx 1.625˝ Mortise Cyl.8327.xxx 1.75˝ Mortise Cyl.8328.xxx 2˝ Mortise Cyl. $103 1088329.xxx 2.25˝ Mortise Cyl.8330.xxx 2.5˝ Mortise Cyl.

Cylinders NoT available in Distressed finishes, non-distressed equalavelents 402=102, 412=112, 452=152

SiNgLe CyLiNDeR

BLOCkiNg RiNgS

DOuBLe CyLiNDeR 030, 031, 033 038, 040, 050 060, 102, 112 003 150, 151, 152 055Item # Description 190, 260, 264 0568321.xxx.DBL 1˝ Double Cyl.8322.xxx.DBL 1.125˝ Double Cyl.8323.xxx.DBL 1.25˝ Double Cyl. $88 928324.xxx.DBL 1.375˝ Double Cyl.8325.xxx.DBL 1.5˝ Double Cyl.8326.xxx.DBL 1.625˝ Mortise Cyl.8327.xxx.DBL 1.75˝ Mortise Cyl.8328.xxx.DBL 2˝ Mortise Cyl. $206 2158329.xxx.DBL 2.25˝ Mortise Cyl.8330.xxx.DBL 2.5˝ Mortise Cyl.

Cylinders NoT available in Distressed finishes, non-distressed equalavelents 402=102, 412=112, 452=152

030, 031, 033 038, 040, 050 060, 102, 112 003 150, 151, 152 055Item # Description 190, 260, 264 0568440.xxx.001 .0625˝ – 1/16˝ B.R. 8440.xxx.002 .0937˝ – 3/32˝ B.R. 8440.xxx.003 .125˝ – 1/8˝ B.R. $11 148440.xxx.004 .1562˝ – 5/32˝ B.R. 8440.xxx.005 .1875˝ – 3/16˝ B.R. 8440.xxx.006 .25˝ – 1/4˝ B.R.

A – .0625˝

B – .0937˝

C – .125˝

D – .1875˝

e – .25˝

f – .3125˝

g – .375˝

h – .435˝

h1 – .53˝

i – .5625˝

J– .75˝

1˝8321.xxx

1˝8321.xxx

1˝8321.xxx

1˝8321.xxx

1˝8321.xxx

1.125˝8322.xxx

1.125˝8322.xxx

1.125˝8322.xxx

1.125˝8322.xxx

1.125˝8322.xxx

1.5˝8325.xxx

.1875˝8440.xxx.5

.1562˝8440.xxx.4

.125˝8440.xxx.3

—

—

—

—

—

—

—

—

SiNgLe CyLiNDeR – C keywAy 1.375˝ 1.75˝ 2˝ 2.25˝ 2.5˝

Lock Trim Thickness

Cylinder Length

Blocking Ring

1˝8321.xxx

1˝8321.xxx

1.125˝8322.xxx

1.125˝8322.xxx

1.25˝8323.xxx

1.25˝8323.xxx

1.25˝8323.xxx

1.375˝8324.xxx

1.5˝8325.xxx

1.5˝8325.xxx

1.625˝8326.xxx

—

—

—

—

—

—

—

—

—

—

—

Cylinder Length

Blocking Ring

1.125˝8322.xxx

1.125˝8322.xxx

1.125˝8322.xxx

1.25˝8323.xxx

1.25˝8323.xxx

1.375˝8324.xxx

1.375˝8324.xxx

1.5˝8325.xxx

1.625˝8326.xxx

1.625˝8326.xxx

1.75˝8327.xxx

—

—

—

—

—

—

—

—

—

—

—

Cylinder Length

Blocking Ring

1.25˝8323.xxx

1.25˝8323.xxx

1.25˝8323.xxx

1.375˝8324.xxx

1.375˝8324.xxx

1.5˝8325.xxx

1.5˝8325.xxx

1.625˝8326.xxx

1.75˝8327.xxx

1.75˝8327.xxx

2˝8328.xxx

—

—

—

—

—

—

—

—

—

—

.125˝8440.xxx.3

Cylinder Length

Blocking Ring

1.375˝8324.xxx

1.375˝8324.xxx

1.375˝8324.xxx

1.5˝8325.xxx

1.5˝8325.xxx

1.625˝8326.xxx

1.625˝8326.xxx

1.75˝8327.xxx

2˝8328.xxx

2˝8328.xxx

2˝8328.xxx

—

—

—

—

—

—

—

—

—

—

—

Cylinder Length

Blocking Ring

DoorThickness:

1˝8321.xxx.DBL

1˝8321.xxx.DBL

1˝8321.xxx.DBL

1˝8321.xxx.DBL

1˝8321.xxx.DBL

1˝8321.xxx.DBL

1˝8321.xxx.DBL

1.125˝8322.xxx.DBL

1.125˝8322.xxx.DBL

1.5˝8325.xxx.DBL

1˝8321.xxx

1.5˝8325.xxx

.2812˝+8440.xxx.7

.25˝+8440.xxx.6

.2187˝+8440.xxx.6

.1526˝+8440.xxx.4

.1875˝8440.xxx.5

.0625˝8440.xxx.1

—

.0625˝

8440.xxx.1

.0937˝+8440.xxx.2

.0937˝+8440.xxx.2

—

—

A – .0625˝

B – .0937˝

C – .125˝

D – .1875˝

e – .25˝

f – .3125˝

g – .375˝

h – .435˝

i – .5625˝

J – .75˝

f – exterior .3125˝

k – interior .875˝

1˝8321.xxx.DBL

1˝8321.xxx.DBL

1˝8321.xxx.DBL

1.125˝8322.xxx.DBL

1.125˝8322.xxx.DBL

1.25˝8323.xxx.DBL

1.25˝8323.xxx.DBL

1.25˝8323.xxx.DBL

1.5˝8325.xxx.DBL

1.625˝8326.xxx.DBL

1.125˝8322.xxx

1.75˝8327.xxx

.1875˝8440.xxx.5

.125˝8440.xxx.3

.0625˝8440.xxx.1

.093˝+8440.xxx.2

.0625˝8440.xxx.1

.093˝+8440.xxx.2

.0625˝8440.xxx.1

—

.0625˝8440.xxx.1

.0625˝8440.xxx.1

—

—

1˝8321.xxx.DBL

1.125˝8322.xxx.DBL

1.125˝8322.xxx.DBL

1.125˝8322.xxx.DBL

1.25˝8323.xxx.DBL

1.25˝8323.xxx.DBL

1.375˝8324.xxx.DBL

1.5˝8325.xxx.DBL

1.5˝8325.xxx.DBL

1.75˝8327.xxx.DBL

1.25˝8323.xxx

2˝8328.xxx

—

.0625˝8440.xxx.1

.0625˝8440.xxx.1

—

.0625˝8440.xxx.1

—

.0625˝8440.xxx.1

.0625˝+8440.xxx.1

.0625˝8440.xxx.1

.0625˝8440.xxx.1

—

.125˝8440.xxx.3

1.125˝8322.xxx.DBL

1.25˝8323.xxx.DBL

1.25˝8323.xxx.DBL

1.25˝8323.xxx.DBL

1.375˝8324.xxx.DBL

1.375˝8324.xxx.DBL

1.5˝8325.xxx.DBL

1.5˝8325.xxx.DBL

1.625˝8326.xxx.DBL

2˝8328.xxx.DBL

1.375˝8324.xxx

2˝8328.xxx

—

0625˝8440.xxx.1

.0625˝8440.xxx.1

—

.0625˝

8440.xxx.1

—

.0625˝

8440.xxx.1

—

.156˝+

8440.xxx.4

.156˝+8440.xxx.4

—

—

1.25˝8323.xxx.DBL

1.375˝8324.xxx.DBL

1.375˝8324.xxx.DBL

1.375˝8324.xxx.DBL

1.5˝8325.xxx.DBL

1.5˝8325.xxx.DBL

1.625˝8326.xxx.DBL

1.625˝8326.xxx.DBL

2˝8328.xxx.DBL

2˝8328.xxx.DBL

1.5˝8325.xxx

2.25˝8329.xxx

—

0625˝8440.xxx.1

.0625˝8440.xxx.1

—

.0625˝

8440.xxx.1

—

.0625˝

8440.xxx.1

—

.0625˝

8440.xxx.1

.0625˝8440.xxx.1

—

.125˝8440.xxx.3

+Two Blocking Rings Required

DOuBLe CyLiNDeR – C keywAy 1.375˝ 1.75˝ 2˝ 2.25˝ 2.5˝

Lock Trim Thickness

Cylinder Length

Blocking Ring

Cylinder Length

Blocking Ring

Cylinder Length

Blocking Ring

Cylinder Length

Blocking Ring

Cylinder Length

Blocking Ring

DoorThickness:

1

Baldwin EstatE lock, imagEs lock and gEnEral HardwarEAll products in these categories will ship from the Baldwin distribution center within 2 to 3 weeks from date of order entry.

In addition we are offering an Images Made-to-Stock program. Over 800 Images skus are now made to stock and available for quick shipment. There are no extra charges included with this service. Please see Baldwin’s literature Images Made to Stock Sku Listing for the detailed list of skus involved in this program. These skus will be updated every 6 to 12 months. caBinEt HardwarE, switcHplatEs & BatH accEssoriEsAll products in these categories will ship from the Baldwin distribution center within 2 weeks from date of order entry.

Baldwin arcHEtypEs All Archetypes products will ship from the Baldwin distribution center within 6 weeks from date of order entry.

Baldwin multi-point trimsAll products in this category will ship from the Baldwin distribution center within 4 weeks from date of order entry.

FrEigHt and ExpEditEd FrEigHt:Orders over $1000 receive freight prepaid by Baldwin. Baldwin will utilize standard ground transportation unless otherwise indicated. In addition to ground freight Baldwin offers 3 types of expedited freight at the customer’s cost. Next Day, Two Day & 3 Day. To request expedited freight just indicate which of the 3 options you prefer. On orders under $1000 and orders that request expedited freight, the cost of shipping will appear on your invoice.

How do i rEquEst samE day sHipmEnts?To receive same day shipment on any of your orders please verify that the items are in stock. This can be done by checking Baldwin Express or calling Baldwin Customer Service. If the item is available, contact Baldwin Customer Service to make us aware that your order is being sent and that it needs to be shipped that day. Orders must be received at Baldwin prior to 11:30 a.m. EST and should be sent to the attention of the Customer Service Representative that you notified. Please note “ship today” on the order and if you want to use expedited freight. i.e. – Next day, Two day, etc.

minimum ordEr sizE:Due to cost of order processing and fulfillment the minimum dollar amount for an order placed directly with Baldwin Customer Service is $250. For orders less than $250 net customers may either place the order through Baldwin Express, increase the size of the order to at least $250, or purchase the items through Baldwin’s wholesale distribution partners.

Baldwin – lEad-timE policy

3

knoBs, lEvErs & rosEttEs How to Order 4-11 Knobs 12-19 Levers 20-32 Rosettes 32-41

intErior & EntrancE HardwarE Latches 42 Strikes 43 Spindles 44-45 Mortise Bolts 46 Turn Pieces 47 Turn Knobs 48 ER trim 49 Pre-drilled Door Accessories 50 Spare Parts 51 Installation Tools 52 Communicating Door Kit 53

EntrancE trim Symbology 54 Terminology 55 Trims 56-141 Images Mortise 142-143

tHick/tHin door kits 144-145

mortisE locks Specifications 146-148 How to Order 149 Entrance Functions 150-151 Grade 1 - Light Commercial 152-153 Interior 154-155 Deadlocks 156 Electrical 157 Strikes 158-159 Armored Fronts 159

cylindErs & kEys Lock Trim Thickness 160 Table of Cylinder Lengths 161 Accessories 162 Cylinder Trim 163 Specifications 164 Rim Lock Cylinders 165 Key Blanks 166

miscEllanEous Replacement Parts 167 Cremone Bolts 168-169 Sliding Door Locks 170-171 Garden Door Trim 172-173 Tools & Keying Kits 174

multi-point Introduction 175-176 How To Order 177 Step 1: Choose Your Trim 178 Step 2: Choose Your 179 Door Configuration Step 3: Choose Function 180-191

EuropEan mortisE trim Introduction 193 How To Order 194 Step 1: Choose Your Trim 195 Step 2: Choose Your 195 Door Configuration Step 3: Choose Function 196-199

rim locks Specifications 201 Rim Locks by Function 202-203 Trim 204 Accessories 205

BronzE Introduction 206 Knobs 207 Levers 208 Handlesets 209-210 Deadbolts 211tuBular Deadbolts 212-219

installation 220-223

indExEs 224-231

conditions oF salE 232

taBlE oF contEntskn

oBs,

lEv

Ers

&

rosE

ttEs

intE

rior

& E

ntra

ncE

Entr

ancE

tri

mm

orti

sE l

ocks

cyli

ndEr

sm

ulti

-poi

nttu

Bula

rin

stal

lati

onin

dEx

3

indEx – EntrancE trim

alpHaBEtical indEx PAGE

6570 Atlanta ..........................1006552 Baltimore ......................806554 Barclay ..........................1326942 Bismark ........................1206555 Boston ..........................706963 Bristol ...........................1326939 Bristol Lever .................1326520 Bristol Sectional ..........606556 Charleston ....................826937 Charlotte .......................1166563 Chicago ........................906571 Concord ........................1026931 Dallas ............................1146940 Denver ..........................1146548 Detroit ...........................886952 Edinburgh .....................1306515 Edinburgh Sectional ....586516 Edinburgh (Oval) .........586545 Empire ..........................746962 Fenwick ........................1306550 Georgetown ..................786544 Hamilton .......................726973 Houston ........................1366950 Kensington ...................1286526 Kensington 3/4 ...........626966 Lakeshore .....................1346974 Lakeshore Lever ..........1346922 Lakewood .....................1086543 Lancaster ......................706560 Lexington .....................866949 Metropolitan ................1266910 Midtown .......................1266976 Minneapolis .................1386938 Mobile ..........................1186565 Monterey ......................946927 Montpelier ....................1126547 Nashville .......................766562 New York ......................886944 Pasadena ......................1226572 Plymouth ......................1046564 Princeton ......................926551 Reading ........................966568 Renssalear....................986935 Republic .......................746999 Richland .......................1406557 Richmond .....................846540 San Diego .....................646541 San Francisco ..............666573 Springfield ....................1066951 Stanford ........................726542 Tremont ........................686567 Trenton..........................966924 Vancouver ....................1106933 Versailles ......................1246948 Victoria .........................1246961 Westminster .................1286549 Williamsburg ................786546 Wilmington ...................86

numErical indEx PAGE

6502 ......................................... 134 6503 ......................................... 88 6503 ......................................... 126 6505 ......................................... 78 6506 ......................................... 136 6508 ......................................... 96 6511 ......................................... 98 6513 ......................................... 101 6514 ......................................... 1386515 Edinburgh Sectional....... 586516 Edinburgh (Oval) ............ 586520 Bristol Sectional ............. 60 6520 ......................................... 59 6526 Kensington 3/4 .............. 626540 San Diego ....................... 646541 San Francisco ................. 666542 Tremont ........................... 686543 Lancaster ........................ 706544 Hamilton.......................... 726545 Empire ............................. 746546 Wilmington ..................... 866547 Nashville ......................... 766548 Detroit.............................. 886549 Williamsburg .................. 786550 Georgetown .................... 786551 Reading ........................... 966552 Baltimore ......................... 806552 ......................................... 130 6553 ......................................... 134 6554 Barclay ............................ 1326555 Boston ............................. 706556 Charleston ...................... 826557 Richmond........................ 846560 Lexington ........................ 866562 New York ......................... 886563 Chicago ........................... 906564 Princeton ......................... 926565 Monterey ......................... 946567 Trenton ............................ 966568 Renssalear ...................... 986570 Atlanta ............................. 1006571 Concord .......................... 1026572 Plymouth......................... 1046573 Springfield ...................... 1066601 ......................................... 82 6602 ......................................... 96 6603 ......................................... 64 6604 ......................................... 102 6605 ......................................... 68 6606 ......................................... 84 6607 ......................................... 74 6608 ......................................... 88 6614 ......................................... 90 6617 ......................................... 98 6619 ......................................... 100 6621 ......................................... 86 6622 ......................................... 72 6624 ......................................... 128 6626 ......................................... 104 6627 ......................................... 132 6628 ......................................... 78 6628 ......................................... 106 6631 ......................................... 92 6634 ......................................... 94 6635 ......................................... 70

knoBs, lEvErs &

rosEttEsintErior &

EntrancEEntrancE trim

mortisE locks

cylindErsm

ulti-pointtuBular

installationindEx

numErical indEx PAGE6638 ......................................... 59 6639 ......................................... 59 6640 ......................................... 60 6641 ......................................... 122 6642 ......................................... 94 6643 ......................................... 62 6690 ......................................... 140 6709 ......................................... 140 6714 ......................................... 122 6763 ......................................... 64 6763 ......................................... 90 6767 ......................................... 80 6769 ......................................... 82 6774 ......................................... 84 6774 ......................................... 104 6789 ......................................... 130 6790 ......................................... 128 6791 ......................................... 72 6792 ......................................... 74 6793 ......................................... 76 6794 ......................................... 102 6795 ......................................... 86 6796 ......................................... 68 6797 ......................................... 70 6798 ......................................... 106 6910 Midtown .......................... 1266922 Lakewood ........................ 1086924 Vancouver ....................... 1106927 Montpelier ...................... 1126931 Dallas .............................. 1146933 Versailles ........................ 1246935 Republic .......................... 746937 Charlotte ......................... 1166938 Mobile ............................. 1186939 Bristol Lever .................... 1326940 Denver ............................. 1146942 Bismark ........................... 1206944 Pasadena ........................ 1226948 Victoria ............................ 1246949 Metropolitan ................... 1266950 Kensington ...................... 1286951 Stanford .......................... 726952 Edinburgh ....................... 1306953 ......................................... 114 6955 ......................................... 116 6956 ......................................... 124 6960 ......................................... 126 6961 Westminster .................... 1286962 Fenwick ........................... 1306963 Bristol .............................. 1326966 Lakeshore ....................... 1346973 Houston........................... 1366975 ......................................... 66 6974 Lakeshore Lever ............. 1346976 Minneapolis .................... 1386979 ......................................... 110 6980 ......................................... 108 6983 ......................................... 92 6983 ......................................... 112 6986 ......................................... 120 6988 ......................................... 114 6990 ......................................... 116 6991 ......................................... 132 6993 ......................................... 124 6996 ......................................... 118 6999 Richland .......................... 140

5

lock types: 1) Mortise 2) Tubular

door types:> Wood, Fiberglass & Hollow Metal > Hollow Fiberglass & Metal doors do NOT allow for any mortise lock installation

door prep:> 1) Pre-drilled for Mortise 2) Pre-drilled for Images Tubular (2.125˝ bore hole) 3) Un-prepped (blank door) – ideal for Estate tubular latch or mortise installations (Estate Passage – .75˝ hole for spindle; Estate Privacy – prep varies, see Installation Instructions)> Adaptors can retrofit most Estate Tubular hardware to 2.125˝ bored doors, but only large rosettes cover bore hole> Tubular locks CANNOT be used on Mortise-prepped doors> Mortise locks can rarely be used on 2.125˝ bore Tubular-prepped doors

door thickness:> Industry Standards – 1.75˝ (Exteriors) & 1.375˝ (Interiors)> Doors ≥ 2 ½˝ Thick limits hardware options – Contact Customer Service> Exterior Doors ≤ 1 ¾˝ Thick limits hardware options> + Escutcheon thickness determines cylinder & spindle lengths needed (see Inside Back Cover)

door stile width:> Narrow Stiles (4˝ or less) limit backset & escutcheon trim options> 3˝ or less Stile severely limits Mortise Lock, Function & Escutcheon options

door Backset:Measurement from edge of door (where it latches) to centerline of lock or doorknob

door Handing: > Certain Lock Types require correct handing (Exterior Levers, Mortise Boxes, Half Dummy Levers)> HAND OF DOOR ALWAYS DETERMINED FROM OUTSIDE

a few rules to follow: > The outside of an exterior door is the street or entrance side > The outside of a room door is the hall side > The outside of a single communicating door is the side from which the hinges are not visible when the door is closed > The outside of a closet door is the room or hall side

Right Handed: hinges on RIGHT – door swings INLeft Handed: hinges on LEFT – door swings INRight Hand Reverse Bevel: hinges on RIGHT – door swings OUTLeft Hand Reverse Bevel: hinges on LEFT – door swings OUT

How to ordEr – EssEntials

door conditions

door tHicknEss & stilE

BacksEt

5

How to ordEr – part numBErs & procEss

Baldwin part numBErs arE madE up oF tHrEE parts sEparatEd By pEriods:

1) product number communicating style

2) 3-digit Finish

3) suffix communicating Function/configuration

xxxx. xxx. xxxx

product Finish Function & number configuration

ordEring EstatE knoBs & lEvErs

1) sElEct knoB/lEvEr ex: 5132.150.MR – 5132 Lever.Satin Nickel.Minus Rose

2) sElEct rosE (or EscutcHEon) ex: 5148.150 – Traditional Rose.Satin Nickel

3) sElEct latcH (or mortisE lock) ex: 5513.150.P – 2.375˝ Tubular Latch. Satin Nickel.Privacy

4) additional HardwarE See following ‘HOW TO ORDER’ pages for other hardware that may be needed Eg. pre-drilled door adaptor, privacy pin extension for thicker doors, spindles, etc.

suFFixEs knoBs, lEvErs & rosEttEs:Function descriptioncode .MR Two Knob or Two Levers, Minus Rose.IMR One Individual Knob, Minus Rose.RMR One Right Lever, Minus Rose.LMR One Left Lever, Minus Rose.I One Individual Rose – Active.IDM One Individual Rose – Dummy

latcHEs:Function descriptioncode No suffix Passage Latch.P Privacy Latch

ENTRANCE(KNOB HOLE)

ENTRANCE(KNOB AND

CYLINDER HOLE)

PRIVACY(KNOB AND TURNPIECE ATTACHED)

EMERGENCY RELEASE(KNOB AND ER HOLE)

PRIVACY PIN* (KNOB AND PRIVACY PIN HOLE)

*NOT AVAILABLE ON ALL ESCUTCHEONS

.kn .kc .kt .kE .kp

EscutcHEon platE conFigurations – ordered in half pairs except for privacy (.KP) cut-outs which are ordered in pairs.

7

Function wHat you nEEd: part # ExamplE pagE #

Half Dummy: Knob – Individual Minus Rose (.IMR) 5000.150.IMR or handed Lever – Right Minus Rose (.RMR or .LMR) 5100.150.RMR Rose – Individual (.IDM) 5002.150.IDM (Rose .IDM includes 5098.004.N Half Dummy back plate)

Half Dummy: Knob – Individual Minus Rose (.IMR) 5000.150.IMR(Escutcheon Plate) or handed Lever – Right Minus Rose (.RMR or .LMR) 5100.150.RMR Escutcheon Plate – .KN 6797.150.KN Half Dummy Spindle* 5092.004 40-41 *See Spindles section for length needed

Full Dummy: Knob or Lever – pair Minus Rose (.MR) 5000.150.MR Rose – pair Full Dummy (.FD) 5048.150.FD Spindle* – 3.5˝ standard for install w/ roses 0510.004 40-41 *See Spindles Chart for length needed on thicker doors

For 2.125˝ Pre-drilled Doors add: Adaptor 5185.009 46 Dummy Insert & Filler Plate (plugs latch hole) 5090.020.A xx

Full Dummy: Knob or Lever – pair Minus Rose (.MR) 5000.150.MR(Escutcheon Plate) (2) Escutcheon Plates – Cut for Knob/Lever (.KN) 6797.150.KN (2) Dummy Trim Plates 5099.004 40 Spindle* – 4˝ 0511.004 41 *See Spindles Chart for length needed

How to ordEr – dummy

Half Dummy

ASSUMED FOR ExAMPLES:Backset – 2.375˝Door thickness – 1.375˝

NOTE: for PRE-DRILLED DOORS, Rose/Escutcheon must be at least 2.625˝ diameter/wide to cover bore hole

5098.004.N(included w/ rose .IDM)

5098.009.N(included w/ roses .FD)

Half Dummy (Escutcheon plate)

Full Dummy

Full Dummy with Pre-drilled cut-out

Full Dummy (Escutcheon plate)

5092.004

5099.004

7

How to ordEr – passagE

Function wHat you nEEd: part # ExamplE pagE #

Passage: Knob or Lever – pair Minus Rose (.MR) 5000.150.MR(Standard Latch) Passage Rose – pair (no suffix) 5048.150 Knob Latch 5510.150 38 or Lever Latch 5513.150

For 2.125˝ Pre-drilled Doors add: Adaptor 5185.009 46

NOTE: For 1.75˝ or thicker Doors, 3.5˝ spindle included with Latch will not be long enough, see Spindles Chart for length needed

Passage: Knob or Lever – pair Minus Rose (.MR) 5000.150.MR(Standard Latch + Escutcheon Plate – Cut for Knob/Lever (.KN) 6797.150.KNEscutcheon Plate) Knob Latch 5510.150 38 or Lever Latch 5513.150 Spindle* – 4˝ 0511.004 41 *See Spindles Chart for length needed

Passage: Knob or Lever – pair Minus Rose (.MR) 5000.150.MR(Mortise Lock) Passage Rose – pair (no suffix) 5017.150 Mortise Lock, Small Case – passage, 2.5˝ Backset 8530.150 144 Spindle* – 3.5˝ standard for install w/ roses 0510.004 41 *See Spindles Chart for length needed on thicker doors

Passage: Knob or Lever – pair Minus Rose (.MR) 5000.150.MR(Mortise Lock + (2) Escutcheon Plates – Cut for Knob/Lever (.KN) 6797.150.KNEscutcheon Plate) Mortise Lock, Small Case – passage, 2.5˝ Backset 8530.150 144 Spindle* – 4˝ 0511.004 41 *See Spindles Chart for length needed

Passage

Passage with Pre-drilled cut-out

Passage (Latch & Escutcheon)

Passage (Mortise Lock)

Passage (Mortise Lock & Escutcheon)

9

FUNCTION WHAT YOU NEED: PART # ExAMPLE PAGE #

Privacy w/ Pin Knob or Lever – pair Minus Rose (.MR) 5000.150.MRin Rose: Privacy Rose* – pair (no suffix) 5149.150 Knob Latch 5510.150P + 5185.009 Adaptor* 38 or Lever Latch 5513.150P + 5185.009 Adaptor* Pin Extender – 5199.000 38 Knob Sets: Needed for doors thicker than 1.625˝ (see Pin formula) Lever Sets: Needed for doors thicker than 1.75˝ (see Pin formula) *Adaptors are required on doors with 2 1/8” face-bored doors. Adaptors are not needed for passages. NOTE: For 1.75˝ or thicker Doors, 3.5˝ spindle included with Latch will not be long enough, see Spindles Chart for length needed

NOTE: Not all Roses available with Privacy Function – see Roses Section


Privacy w/ Pin Knob or Lever – pair Minus Rose (.MR) 5000.150.MRin Escutcheon: Escutcheons (ordered as pair) – KP cut for Privacy 6797.150.KP Knob Latch 5510.150P 38 or Lever Latch 5513.150P Pin Extender (knob sets only) – Doors thicker than 1.625 (see Pin formula) 5199.000 38 Spindle* – 4˝ 0511.004 41 *See Spindles Chart for length needed

How to ordEr – privacy

Privacy with Pin in Rose NOT AVAILABLE FOR ALL ROSES

Privacy with Pin in EscutcheonNOT AVAILABLE FOR ALL ESCUTCHEONS



9


Passage Knob w/ Mortise Bolt W/ 2.25˝ OR SMALLER ROSES ONLY

Passage Knob w/ Mortise Bolt & Escutcheon plate


Passage Knob w/ Knob or Lever – pair Minus Rose (.MR) 5000.150.MRMortise Bolt (ER Trim): Passage Rose* – pair (no suffix) 5002.150 Knob Latch: For Pre-drilled Doors 5510.150 + 5185.009 Adaptor 38 or Lever Latch: For Pre-drilled Doors 5513.150 + 5185.009 Adaptor NOTE: For 1.75˝ or thicker Doors, 3.5˝ spindle included with Latch will not be long enough, see Spindles Chart for length needed Mortise Bolt 0418.150.LTP (Less Turn Piece) 42 Turn Piece 6750.150 43 Emergency Release Trim 0416.150 45


Passage Knob w/ Knob or Lever – pair Minus Rose (.MR) 5000.150.MRMortise Bolt & Escutcheon plate – Escutcheon plate Outside: Cut for Emergency (KE) 6797.150.KE(ER Trim): Inside: Cut for Turn Knob (KT) 6797.150.KT Knob Latch: 5510.150 38 or Lever Latch: 5513.150 Spindle* – 4˝ 0511.004 41 *See Spindles Chart for length needed Mortise Bolt 0418.150.LTP (Less Turn Piece) 42 Combination Strike 5528.150 39

11

FUNCTION WHAT YOU NEED: PART # ExAMPLE P AGE #

Mortise Lock w/ Knob or Lever – pair Minus Rose (.MR) 5000.150.MREmergency Passage Rose* – pair (no suffix) 5002.150Release Trim: Emergency Release Trim – 0404.150 Turn Piece 6756.150 Mortise Lock, 2.5˝ Backset 6315.150 144-145 Spindle* – 4˝ 0511.004 41 *See Spindles Chart for length needed


Mortise Lock w/ Knob or Lever – pair Minus Rose (.MR) 5000.150.MREscutcheon Plate Escutcheon Plate, Exterior 6797.15.KE Escutcheon Plate, Interior 6797.150.KT Mortise Lock, 2.5˝ Backset 6315.150 144-145 Spindle* – 4˝ 0511.004 41 *See Spindles Chart for length needed


Mortise Lock w/ ER Trim

Mortise Lock w/ Escutcheon Plate



For ordEring HandlEsEts, rEFEr to tHE innEr Flap oF tHE Back covEr

11

knoB/lEvEr pinning:

Definition: Pinning is a permanent attachment of the outside knob or lever to the spindle.Outside levers typically are pinned for added security in public commercial settings.

ordEr:1. Knobs or Levers & Finish

spEciFy For rEFErEncE only:2. Door thickness 3. Trim to be used4. Handing of the outside lever, if applicable5. Spindle (included)

all Baldwin levers meet ada standards.

How to ordEr – split FinisHEs/stylEs

For split Finish & split style orders, we recommend calling customer service:

800.437.7448 8am – 5pm Est

Fax: 800.255.9785

For pinning orders, we recommend calling customer service

Pinning Charge for Estate passage or privacy sets (pair) $61

Included with .MRPN cost

SPINDLE PERMANENTLY ATTACHED TOOUTSIDE KNOB OR LEVER WITH PIN

CONCEALEDPIN PLACEMENT

OUTSIDEINSIDE

SET SCREW USED TO MOUNTINSIDE KNOB OR LEVER

13

2.5˝

2˝1.7˝

5000 Knobshown w/ 5002 Rose

knoBs – solid Brass



5008 Knob (DWO)shown w/ 5017 Rose

030, 031, 033 034, 038, 040 050, 060, 102 003, 055 112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 452

5000.xxx.MR Minus Roses – pair 1.8 $126 144

5000.xxx.IMR Individual Minus Rose – half pair .9 63 72

5000.xxx.MRPN Minus Roses – pair (PINNED) 1.8 187 205

Item # Description Wt. 030, 150, 260

5001.xxx.MR Minus Roses – pair 2.7 $134

5001.xxx.IMR Individual Minus Rose – half pair 1.4 67

5001.xxx.MRPN Minus Roses – pair (PINNED) 2.7 195









2.2˝

2˝1.7˝

3.9˝

2.6˝ 2.4˝

2.3˝

2.3˝2.2˝






4˝

2.4˝2.8˝

13

5009 Knob – swarovski crystalshown w/ 5048 Rose




















5013.xxx.IMR Individual Minus Rose – half pair 1.1 67 76






2.5˝

2.4˝2.8˝

2.5˝

2.8˝x

1.8˝2.6˝

2.2˝

2.25˝1.75˝

3.9˝

2.4˝2.6˝

2.625˝

15





1.75″

2.25″

1.5″×

2.5″























15























2.2˝

.4˝

2.1˝

2.6˝

2.6˝

2.2˝2.6˝

2.3˝

2.7˝2.6˝





17

5055 Knob shown w/ 5032 Rose

2.1˝

2.1˝2.1˝

2.7˝

2.4˝2.4˝

2.125″

2.375″×

1.437″1.75″

2˝

2.4˝2.8˝

2.1˝

2.6˝1.7˝














5060.xxx.IMR Individual Minus Rose – half pair 7 67 76












17





















2.5˝

2.2˝2.2˝

2.3˝

2.2˝2.6˝





2.4˝

2.4˝2.6˝

2.7˝

2.2˝2.8˝



2.625˝

2.7˝

2.2˝

19

2.8˝

2.25˝2.8˝

2.5˝

2.4˝2.6˝















5069 Knob shown w/ 5076 Rose


2.3˝

2.5˝2.625˝

2.5˝

2.5˝

2.625˝


K001.xxx.MR Minus Roses – pair 2.5 $286 $314

K001.xxx.IMR Individual Minus Rose – half pair 1.5 143 157




K001 Knob shown w/ R002 Rose


19

2.5˝

2.625˝

2.4˝

2.625˝

2.5˝

2.6˝

2.4˝

2.6˝

















knoBs – solid Brass & stainlEss stEEl

5061S Knob – stainlEss stEElshown w/ 5032S Rose

102, 112, 151Item # Description Wt. 320, 324

5055S.xxx.MR Minus Roses – pair 1.1 $134

5055S.xxx.IMR Individual Minus Rose – half pair .55 67

5055S.xxx.MRPN Minus Roses – pair (PINNED) 1.1 195



5061S.xxx.IMR Individual Minus Rose – half pair .55 67


not rEcommEndEd For usE witH privacy rosEs

Baldwin Stainless Steel products crafted with Grade 304 Stainless Steel

2.1˝

2.1˝2.1˝

2.125˝

5055S Knob – stainlEss stEElshown w/ 5032S Rose

21

3.25″

3.0″

1.75˝

5100 Levershown w/ 5002 Rose

lEvErs – solid Brass




030, 031, 033 034, 038, 040 050, 060, 102 003 112, 150, 151 055Item # Description Wt. 190, 260, 264 056


5100.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .55 67 76




5101.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair 1.3 67 76










21

1.75″

3.625″

1.938″

2.625˝






















23

5113 LEVER W/ 5038 ROSETTE

2˝

3˝

4.5˝


2˝

4.7˝

2.6˝






















23

2˝

4.5˝

2.6˝


2˝

4.7˝

2.75˝






















25

1.75″

3.875″

3.0″





5132.xxx.MRPN Minus Roses – pair (PINNED) 10 187 205

2.125″

2.625″

3.75″




















5130.xxx.MRPN Minus Roses – pair (PINNED) 17 187 205


25

4˝

2.3˝

1.75˝












2.125

2.625

4.0

5136 Lever (DWO)shown w/ 5046 Rose





2.312

2.625

4.0






2˝

2.8˝

4.6˝






27

2.65″(67.3mm)

1.75″

4.75″(120.7mm)

2.25ʺ

2.25ʺ

4.0ʺ












2.48(62.9mm)

4.46(113.2mm)

2.125˝

4.46˝(113.2mm)

2.48˝



2.58(65.6mm)

4.19(106.4mm)

1.75˝

2.58˝

4.19˝









2.50(63.6mm)

4.58(116.4mm)

2.125˝

4.58˝

2.50˝






27


2.90(13.6mm)

4.62(117.3mm)





5166.xxx.MRPN Minus Roses – pair (PINNED) 2.0 195 2131.75˝






4.59˝

2.90˝

L001 Levershown w/ R001 Rose

030, 031, 033 034, 038, 040 050, 060, 102 055 112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 452

L001.xxx.MR Minus Roses – pair 1.4 $530 $580

L001.xxx.RMR (LMR) Right (Left) Minus Rose – half pair 0.7 265 290





2.63”

4.24”

2”

2.48”

5.6”

2”

29


















2.51”(63.8mm)

4.37”(111.2mm)

2”

2.52”(64.8mm)

4.2”(106.7mm)

2”

2.9”(73.7mm)

4.46”(113.4mm)

2”

2.55”(64.7mm)

5.66”(143.9mm)

1.97”

29

2.90(73.6mm)

0.44(11.1mm)

5.24(133.2mm)

2.125˝

2.90˝(73.6mm)

5.24˝(133.2mm)

0.44˝(11.1mm)

2.90(73.6mm)

4.52(114.8mm)

2.92(74.2mm)

5.23(132.9mm)

2.52(63.9mm)

4.74(120.3mm)

2.65(67.3mm)

4.75(120.7mm)

5168S Lever – stainlEss stEElshown w/ 5032S Rose

lEvErs – stainlEss stEEl






5168S.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair .55 67



















2.125˝

2.125˝

2.125˝

2.125˝

Baldwin Stainless Steel products are crafted with Grade 304 Stainless Steel

2.65˝(67.3mm)

2.92˝(74.2mm)

2.52˝(63.9mm)

2.90˝(73.6mm)

4.75˝(120.7mm)

5.23˝(132.9mm)

4.74˝(120.3mm)

4.52˝(114.8mm)

31

.5˝ MAX

4.9˝

2.7˝

L007 Lever

rEturn lEvErs – solid Brass

L008 Lever

L009 Lever

L010 Lever

L011 Lever


L007.xxx.MR Minus Roses – pair $134 152

L007.xxx.RMR (.LMR) Right (Left) Minus Rose – half pair 67 76

L007.xxx.MRPN Minus Roses – pair (PINNED) 195 213

















.5˝ MAX

5.0˝

2.8˝

.5˝ MAX

4.8˝

2.7˝

.5˝ MAX

4.7˝

2.9˝

.5˝ MAX

5.3˝

2.9˝

31

L012 Lever






.5˝ MAX

4.4˝

2.7˝

1.9˝

4.6˝

2.5˝

4.25˝

5.0˝

4.4˝

2.1˝

5.1˝

2.5˝

4.2˝4.5˝

1.9˝

5.3˝5.4˝

4.6˝

1.9˝

5.3˝

5.4˝

1.9˝

4.6˝

2.5˝

4.25˝

5.0˝

4.4˝

2.1˝

5.1˝

2.5˝

4.2˝4.5˝

1.9˝

5.3˝5.4˝

4.6˝

1.9˝

5.3˝

5.4˝

1.9˝

4.6˝

2.5˝

4.25˝

5.0˝

4.4˝

2.1˝

5.1˝

2.5˝

4.2˝4.5˝

1.9˝

5.3˝5.4˝

4.6˝

1.9˝

5.3˝

5.4˝

1.9˝

4.6˝

2.5˝

4.25˝

5.0˝

4.4˝

2.1˝

5.1˝

2.5˝

4.2˝4.5˝

1.9˝

5.3˝5.4˝

4.6˝

1.9˝

5.3˝

5.4˝

030, 031, 033 034, 038, 040 050, 060, 102 003, 055 112, 150, 151 056, 402Item # Description 190, 260, 264 412, 452
















L013 Lever

L014 Lever

L015 Lever

L016 Lever

1.9˝

4.6˝

2.5˝

4.25˝

5.0˝

4.4˝

2.1˝

5.1˝

2.5˝

4.2˝4.5˝

1.9˝

5.3˝5.4˝

4.6˝

1.9˝

5.3˝

5.4˝





L017 Lever

33


5002.xxx 1.75˝ Passage – pair .2 $32 38

5002.xxx.FD 1.75˝ Dummy – pair .2

5002.xxx.I 1.75˝ Passage – half pair .1 16 19

5002.xxx..IDM 1.75˝ Dummy – half pair .1

5017.xxx 2.25˝ Passage – pair .4 40 46



5017.xxx.IDM 2.25˝ Dummy – half pair .2

5048.xxx 2.625˝ Passage – pair .8 40 46



5048.xxx.IDM 2.625˝ Dummy – half pair .4

5148.xxx 2.625˝ Privacy – pair .8 40 46

5148.xxx.I 2.625˝ Privacy – half pair .4 20 23

lEvErs & rosEttEs – solid Brass

5003

2.0˝

1.75˝

5002

2.625˝

Large enough to cover 2.125˝ pre-bored door

50485148


5003.xxx 2˝ Passage – pair .4 $46 52

5003.xxx.FD 2˝ Dummy – pair .4

5003.xxx.I 2˝ Passage – half pair .2 23 26

5003.xxx.IDM 2˝ Dummy – half pair .2

5004.xxx 2.625˝ Passage – pair .8 $46 525004.xxx.FD 2.625˝ Dummy – pair .8

5004.xxx.I 2.625˝ Passage – half pair .4 23 265004.xxx.IDM 2.625˝ Dummy – half pair .4

5149.xxx 2.625˝ Privacy – pair .8 46 52


2.25˝

5017

2.625˝


50045149

1.9˝

4.6˝

2.5˝

4.25˝

5.0˝

4.4˝

2.1˝

5.1˝

2.5˝

4.2˝4.5˝

1.9˝

5.3˝5.4˝

4.6˝

1.9˝

5.3˝

5.4˝ 030, 031, 033 034, 038, 040 050, 060, 102 003, 055 112, 150, 151 056, 402Item # Description 190, 260, 264 412, 452




L018 Lever

33

5014

2.25˝

1.5˝

rosEttEs – solid Brass

50105151

2˝

50705123

2.625˝




5006.xxx.I 1.75˝ Passage – half pair .15 16 195006.xxx.IDM 1.75˝ Passage – half pair .15

5032.xxx 2.125˝ Passage – pair .4 40 46



5139.xxx 2.125˝ Privacy – pair .4 40 46


5046.xxx 2.625˝ Passage – pair .8 40 465046.xxx.FD 2.625˝ Dummy – pair .8


5146.xxx 2.625˝ Privacy – pair .8 40 46



5010.xxx 2˝ Passage – pair .4 $46 525010.xxx.FD 2˝ Dummy – pair .4

5010.xxx.I 2˝ Passage – half pair .2 23 265010.xxx.IDM 2˝ Dummy – half pair .2

5151.xxx 2˝ Privacy – pair .4 46 52

5151.xxx.I 2˝ Privacy – half pair .2 23 26



5123.xxx 2.625˝ Privacy – pair .8 46 52



5014.xxx 1.5˝ x 2.25˝ Passage – pair .3 $40 465014.xxx.FD 1.5˝ x 2.25˝ Dummy – pair .3

5014.xxx.I 1.5˝ x 2.25˝ Passage – half pair .2 20 235014.xxx.IDM* 1.5˝ x 2.25˝ Dummy – half pair .2

*5014.xxx.IDM is surface mounted - requires 5014 backplate (included)

2.625˝


50465146

1.75˝

5006

2.125˝

50325139

35


2.75˝


50265126


5026.xxx 2.75˝ Passage – pair 1.0 $46 525026.xxx.FD 2.75˝ Dummy – pair 1.0


5126.xxx 2.75˝ Privacy – pair 1.0 46 52





5062

1.75˝






5119.xxx 2.625˝ Privacy – pair .5 46 52


2.625˝

5018

1.75˝


5019 5119

5016

1.75˝

2.625˝


50215145




5021.xxx 2.625˝ Passage – pair .8 46 525021.xxx .FD 2.625˝ Dummy – pair .8


5145.xxx 2.625˝ Privacy – pair .8 46 52


35

50295144

3.94˝

2.625˝

2.625˝

2˝


50285155

50755127




5029.xxx.I 2.625˝ x 3.94˝ Passage – half pair .3 20 235029.xxx.IDM 2.625˝ x 3.94˝ Dummy – half pair .3

5144.xxx 2.625˝ x 3.94˝ Privacy – pair .6 40 46

5144.xxx.I 2.625˝ x 3.94˝ Privacy – half pair .3 20 23








5127.xxx 2.625˝ Privacy – pair .8 46 52







2˝

50355156






5153.xxx 2.625˝ Privacy – pair .8 46 52


2.25˝

5027

2.75˝


5053 5153

37



5042.xxx 2.63˝ x 4.125˝ Passage – pair 1.0 $46 525042.xxx.FD 2.63˝ x 4.125˝ Dummy – pair 1.0


5142.xxx 2.63˝ x 4.125˝ Privacy – pair 1.0 46 52

5142.xxx.R (L) 2.63˝ x 4.125˝ Privacy – half pair .5 23 26


5037.xxx (.FD) 1.75˝ Passage – pair .3 $32 385037.xxx .FD 1.75˝ Dummy – pair .3







5078..xxx 2.625˝ Passage – pair .8 46 525078.xxx.FD 2.625˝ Dummy – pair .8


5134.xxx 2.625˝ Privacy – pair .8 46 52


2.625˝


50785134

2˝

50385157

5037

1.75˝




5036

2.43˝

50425142


2.63˝

4.125˝


5076..xxx 2.625˝ Passage – pair .8 46 525076.xxx.FD 2.625˝ Dummy – pair .8


5129.xxx 2.625˝ Privacy – pair .8 46 52


2.625˝


50765129

37


2.625˝

2˝


50445140

50585158

2˝

50565160

2.625˝


50475147








5158.xxx 2.625˝ Privacy – pair .8 46 52





5147.xxx 2.625˝ Privacy – pair .8 40 46







50595159

4.17˝


2.93˝


5059.xxx 2.63˝ x 4.125˝ Passage – pair 1.2 $46 52

5059.xxx.FD 2.63˝ x 4.125˝ Dummy – pair 1.2

5059.xxx.I 2.63˝ x 4.125˝ Passage – half pair .6 23 26

5059.xxx.IDM 2.63˝ x 4.125˝ Dummy – half pair .6

5159.xxx 2.63˝ x 4.125˝ Privacy – pair 1.2 46 52


39



R003.xxx.PS 2˝ Passage – pair

R003.xxx.FD 2˝ Dummy – pair .5 $86 $94

R003.xxx.PV 2˝ Privacy – pair

R003.xxx.IPS 2˝ Passage – half pair

R003.xxx.IDM 2˝ Dummy – half pair .3 43 47

R003.xxx.IPV 2˝ Privacy – half pair

R004.xxx.PS 2-5/8˝ Passage – pair

R004.xxx.FD 2-5/8˝ Dummy – pair .5 86 94

R004.xxx.PV 2-5/8˝ Privacy – pair

R004.xxx.IPS 2-5/8˝ Passage – half pair

R004.xxx.IDM 2-5/8˝ Dummy – half pair .3 43 47

R004.xxx.IPV 2-5/8˝ Privacy – half pair

R004 Rose R003 Rose

2-5/8˝ dia.2˝ dia.




5143.xxx 2.63˝ x 3.94˝ Privacy – pair .6 46 52


50745143

3.94˝

2.625˝ Large enough to cover 2.125˝ pre-bored door

2˝

50715171 030, 031, 033

034, 038, 040 050, 060, 102 003, 055 112, 150, 151 056, 402Item # Description Wt. 190, 260, 264 412, 452



5171.xxx. 2˝ Privacy – pair .8 40 46















R002 Rose R001 Rose

2-5/8˝ dia.2˝ dia.

39














R006 Rose R005 Rose

2-5/8˝ dia.2˝ dia.














R008 Rose R007 Rose

2-5/8˝ dia.2˝ dia.














R010 Rose R009 Rose

2-5/8˝ dia.2˝ dia.


41


R018.xxx.PS 1.75˝ Passage – pair .3 $36 42R018.xxx.FD 1.75˝ Dummy – pair .3

R018.xxx.IPS 1.75˝ Passage – half pair .15 18 21R018.xxx.IDM 1.75˝ Passage – half pair .15

1.75˝

R018


R016.xxx.PS 2.625˝ Passage – pair .8 44 50R016.xxx.FD 2.625˝ Dummy – pair .8

R016.xxx.IPS 2.625˝ Passage – half pair .4 22 25R016.xxx.IDM 2.625˝ Dummy – half pair .4

R016.xxx.PV 2.625˝ Privacy – pair .8 44 50

R016.xxx.IPV 2.625˝ Privacy – half pair .4 22 25

2.625˝


R016


R017.xxx.PS 2.625˝ Passage – pair .8 $44 50R017.xxx.FD 2.625˝ Dummy – pair .8

R017.xxx.IPS 2.625˝ Passage – half pair .4 22 25R017.xxx.IDM 2.625˝ Dummy – half pair .4

R017.xxx.PV 2.625˝ Privacy – pair .8 44 50

R017.xxx.IPV 2.625˝ Privacy – half pair .4 22 25


R017

2.625˝














R012 Rose R011 Rose

2-5/8˝ dia.2˝ dia.


41

rosEttEs – stainlEss stEEl

2.625˝

1.75˝

2.125˝


5034S

5032S5139S

5033S5133S

2˝

5056S


5034S.xxx 1.75˝ Passage – pair .3 $325034S.xxx.FD 1.75˝ Dummy – pair .3

5034S.xxx.I 1.75˝ Passage – half pair .15 165034S.xxx.IDM 1.75˝ Dummy – half pair .15

5032S.xxx 2.125˝ Passage – pair .4 405032S.xxx.FD 2.125˝ Dummy – pair .4


5139S.xxx 2.125˝ Privacy – pair .4 40

5139S.xxx.I 2.125˝ Privacy – half pair .2 20

5033S.xxx 2.625˝ Passage – pair .8 405033S.xxx.FD 2.625˝ Dummy – pair .8


5133S.xxx 2.625˝ Privacy – pair .8 40

5133S.xxx.I 2.625˝ Privacy – half pair .4 20


5056S.xxx 2˝ Passage – pair .3 $405056S.xxx.FD 2˝ Dummy – pair .3

5056S.xxx.I 2˝ Passage – half pair .15 205056S.xxx.IDM 2˝ Dummy – half pair .15

5160S.xxx. 2˝ Privacy – pair .30 40

5160S.xxx.I 2˝ Privacy – half pair .15 20


NOTE: 320 & 324 IS NOT AVAILABLE AS RUST PROOF

NOTE: 320 & 324 IS NOT AVAILABLE AS RUST PROOF

43

030, 031, 033, 034 038, 040, 050 060, 102, 112 003passage latches 150, 151, 152 055 Item # Description Backset Faceplate 190, 260, 264 056

5510.xxx (.ASA, .FLS) Knob-Strength Passage latch 2.375˝ 1˝w

5512.xxx* (.ASA) Knob-Strength Passage latch 2.375˝ 1.125˝w

5513.xxx (.ASA, .FLS) Lever-Strength Passage latch 2.375˝ 1˝w

5515.xxx* (.ASA) Lever-Strength Passage latch 2.375˝ 1.125˝w $62 655520.xxx (.ASA, .FLS) Knob-Strength Passage latch 2.75˝ 1˝w

5522.xxx* (.ASA) Knob-Strength Passage latch 2.75˝ 1.125˝w

5523.xxx (.ASA, .FLS) Lever-Strength Passage latch 2.75˝ 1˝w

5525.xxx* (.ASA) Lever-Strength Passage latch 2.75˝ 1.125˝w

privacy latches Item # Description Backset Faceplate Tier 1 Tier 2*

5510.xxx.P (.ASA, .FLS) Knob-Strength Privacy latch 2.375˝ 1˝w

5512.xxx.P* (.ASA) Knob-Strength Privacy latch 2.375˝ 1.125˝w

5513.xxx.P (.ASA, .FLS) Lever-Strength Privacy latch 2.375˝ 1˝w

5515.xxx.P* (.ASA) Lever-Strength Privacy latch 2.375˝ 1.125˝w $62 655520.xxx.P (.ASA, .FLS) Knob-Strength Privacy latch 2.75˝ 1˝w

5522.xxx.P* (.ASA) Knob-Strength Privacy latch 2.75˝ 1.125˝w

5523.xxx.P (.ASA, .FLS) Lever-Strength Privacy latch 2.75˝ 1˝w

5525.xxx.P* (.ASA) Lever-Strength Privacy latch 2.75˝ 1.125˝w

5510.xxx.0030 Privacy Button – Knobs 1.16˝ length 9 12

5513.xxx.0030 Privacy Button – Levers 1.34˝ length 9 12

5199.000 Privacy Button Extender 5 NA

latches not available in distressed finishes, non-distressed equalavelents 402=102, 412=112, 452=152*Latches with 1.125˝ wide faceplate commonly used for commercial applications

Latches available with Standard strike (no suffix), ASA strike (.ASA) or Full Lip Strike (.FLS)

Example: 5510.xxx = Standard strike 5510.xxx.ASA = ASA strike 5510.xxx.FLS = Full Lip Strike

intErior & EntrancE HardwarE – latcHEs

all latcHEs:> Hub rotation only 28° for easy turning> Non-handed latches (reversible)> Fully adjustable fronts for use on beveled doors> Bolt head features anti-friction insert for smooth operation> Lever-Strength latches manufactured with heavy duty springs> Sturdy non-rusting construction throughout> Pre-bored doors – up to 1.75˝ thick doors only

2.375˝ BacksEt latcH

2.75˝ BacksEt latcH

1˝ widE FacEplatE 1.125˝ widE FacEplatE*

Privacy Button

Anti-friction insert

ul listEd EstatE passagE/privacy: Only select Estate passage and privacy sets have been certified by UL at this time. This is determined by the rose that is used on the particular set, along with the use of the Estate 5185.009 adaptor. Estate roses that meet the UL requirement when used in conjunction with the Estate 5185.009 adaptor are as follows:

ordEring:1.) Choose your Estate knob or lever pair2.) Choose your Estate passage or privacy rose from the list above3.) Choose your knob or lever latch4.) Add the 5185.009 adaptor5.) Choose the UL kit for Estate passage or privacy sets in the finish that matches your knob or lever latch: U5510.xxx

Note: all components from the passage/privacy kit must be used for UL certificationPassage Kits – Available October 1st, 2008, Please refer to the Images catalog for ordering Images UL passage kits.

included with each kit:UL latch faceplate, Inside & Outside UL Shield, UL Retaining Ring

50045019502150265033S5029

504250465047504850535058

505950705074507550765078

511951235126512751295133S

513451425143514451455146

514751485149515351585159

030, 031, 033, 034 038, 040, 050 060, 102, 112 150, 151, 152 003Item # Description 190, 260, 264 055, 056

U5510.xxx UL Kit for Estate passage or privacy sets $20 23

includEd witH all latcHEs:> Standard Box Strike (T-Strike)> ASA or Full Lip Strike also available at no charge – specify as follows: 5510.xxx.ASA Latch x ASA Strike 5510.xxx.FLS Latch × Full Lip Strike> Wood fasteners and template > Dust Box – 55100> 3.5˝ spindle*> Privacy Button (with Privacy Latches)

*notE: For doors thicker than 1.75˝ or use with escutcheon plates, a longer spindle is likely needed. See Spindle Chart.

43

intErior & EntrancE HardwarE – strikEs

5510.tstr – standard Box strike (t strike)LIP TO CENTER DIMENSION (LTC): 1.312˝ (33mm)DUST BOx: furnished unattached (55100)TEMPLATE: metal frames to be prepared in accordance with ANSI standard A115.2

5510.astr – asa strikeLTC: 1.25˝ (32mm)DUST BOx: not furnishedTEMPLATE: metal frames to be prepared in accordance with ANSI standard A115.2

5528.r (.l) – combination privacy strike – EscutcHEonLTC: 1.28˝ (33mm), other lengths not availableFEATURES: Permits use of 5500 series tubular latches and 0413 or 0418 mortise bolts with KT and KE escutcheon trimStrike is designed with a curved lip, so proper hand of door is requiredFurnished with 0417 Emergency key standardDUST BOx: Boxes furnished with tubular latches/mortise bolts can be used in combination with strikeNOTE: handling of strike is based on latch bolt being installed below deadbolt

5300.EFls – Extended full lip strike (only sizE availaBlE)For 2˝ (51mm) and 2.25˝ (57mm) thick doors or when trim condition necessitates a larger strikeCan also be used with Images handlesets and interior setsLTC: 1.375˝ (35mm).

030, 031, 033, 034 038, 040, 050 060, 102, 112 003 150, 151, 152 055 Item # Description 190, 260, 264 056

5510.xxx.TSTR Standard Box Strike

5510.xxx.E158 Extended Lip Box Strike – 1.625˝ LTC

5510.xxx.E178 Extended Lip Box Strike – 1.875˝ LTC

5510.xxx.E214 Extended Lip Box Strike – 2.25˝ LTC $15 155510.xxx.ASTR ASA Strike –

5510.xxx.FSTR Full Lip Strike –

5300.xxx.EFLS Extended Full Lip Strike

5528.xxx.R (.L) Combination Privacy Strike

5510.000 Dust box for use with 5510.xxx.TSTR strike (000 finish only) $3

strikes not available in distressed finishes, non-distressed equalavelents

402=102, 412=112, 452=152

CROSS SECTION

5510.Fstr – Full lip strikeLTC: 1.125˝ (29mm)DUST BOx: not available

CROSS SECTION

CROSS SECTION

CROSS SECTION

CROSS SECTION

5510.000 – dust boxFor use with T strike and Extended T strikeConceals installation marks and cutouts

0417 Emergency Key

includEd witH all passagE & privacy latcHEs

5510.E158, .E178, .E214 – Extended t strikeLTC: 5510.xxx.E158 – 1.625˝ (41mm)LTC: 5510.xxx.E178 – 1.875˝ (48mm)LTC: 5510.xxx.E214 – 2.25˝ (57mm)DUST BOx: not furnished (use dust box provides with standard T strike)

CROSS SECTION

5510 & 5513.xxx.0030 – privacy Button:> Furnished with all privacy tubular latch sets (latches ordered .P)> 5510 for all knob-Strength, 5513 for all lever-Strength latches

5199.000 – privacy Button Extender Use to extend length of privacy button in applications where hardware is installed on doors over 1.75˝ thick and/or with escutcheon plates thicker than .25˝

intErior & EntrancE HardwarE – dummy spindlEs

dummy spindles – rosEs

Item # Description

5098.004.N Half Dummy Back Plate $6

5098.009.N Full Dummy Back Plate 6

5098.004.A Transitional Half Dummy Back Plate 11

dummy spindles & adaptors – EscutcHEon


5077.004 Half Dummy Spindle 1.5˝ $9

5091.004 Half Dummy Spindle .875˝ 11

5092.004 Half Dummy Spindle 1.125˝ 11

5099.004 Full Dummy Adaptor 1.175˝ 4

5098.004.n – Half dummy spindle – rosEs> Half dummy surface mounting for all current Estate knobs and levers > Rose threads onto adaptor> Included with roses ordered .IDM> If surface mounting is problematic (ie. hollow core doors) please order Rigid Mounting Spindle (5084.xxx) – shown below

notE: 5098.004.A Transitional spindle for discontinued threaded knobs & levers, as well as all current Estate knobs and levers

5098.009.n – Full dummy adaptor – rosEs> Rose threads onto adaptor> For all current Estate knobs and levers> Two adaptors included with roses ordered .FD > spindle ordered separately

5077, 5091, 5092 – Half dummy spindle – EscutcHEon > For mounting all current Estate knobs and levers to Escutcheon plates> 5092 for most escutcheons > 5077 for thick escutcheons: ≥ .75˝ thick (eg. Empire, Hamilton & Tremont)> 5091 for thin escutcheons: ≤ .1˝ thick (eg. Boston, San Diego, etc.)

.a suFFix transitional spindlEs: (old stylE):For use with all discontinued Estate threaded knobs & levers, as well as all current Estate knobs and levers

transitional Half dummy spindles – EscutcHEon


5077.004.A Half Dummy Spindle 1.5˝

5091.004.A Half Dummy Spindle .875˝ $11

5092.004.A Half Dummy Spindle 1.125˝

5099.004 – Full dummy adaptor – EscutcHEon > For mounting escutcheons on Full Dummy applications (2 needed)> 1.175˝ diameter (30mm)> spindle ordered separately

5097.009.n – active trim Back plate see sparE parts, page 49

5084.xxx – Half dummy rigid mounting spindle – rosEs> Optional mounting in place of 5098.004.N for a more secure mounting> Through-bolt application ideal for hollow core doors or where surface mounting is not recommended

030, 031, 033 034, 038, 040 050, 060, 102 003, 055 112, 150, 151 056, 402 Item # Description Spindle length Door thickness 190, 260, 264 412, 452

5084.xxx.A Half Dummy Rigid Mounting 2.75˝ 1.375˝ - 1.75˝ $28 30

6748.xxx.A Closet Spindle 3.375˝ 1.75˝ 41 456749.xxx.A Closet Spindle 2.625˝ 1.375˝

6748-6749.xxx.a – closet spindle> For the inside of closets and low frequency use doors> Installation is identical to standard trim designs> For 2.125˝ pre-drilled doors, use 5081 closet spindle with 5185 adaptor, See Pre-drilled Doors Accessories CAUTION: Closet spindles are difficult to turn and should not be used where children,

aged, or physically-handicapped people may lock themselves within a small space

6748.xxx.a 6749.xxx.a

straight spindles – passagE





0512.004 Broached straight 4.5˝ $100513.004 Broached straight 5˝




swivel spindles – privacy




0521.004 Broached swivel 4.5˝ $140522.004 Broached swivel 4˝




Half spindles – Front door (thumbpiece to knob or lever)



0531.004 Broached half 2.875˝ $100532.004 Broached half 3.375˝



.a suFFix transitional spindlEs (old stylE):For use with all discontinued Estate threaded knobs & levers, as well as all current Estate knobs and levers

transitional straight spindles – passagE


0509.004.A Transitional straight 3˝

0510.004.A Transitional straight 3.5˝


0512.004.A Transitional straight 4.5˝ $150513.004.A Transitional straight 5˝

0514.004.A Transitional straight 5.5˝



transitional swivel spindles – privacy


0519.004.A Transitional swivel 3˝

0520.004.A Transitional swivel 3.5˝

0521.004.A Transitional swivel 4.5˝ $190522.004.A Transitional swivel 4˝

0524.004.A Transitional swivel 5˝

0525.004.A Transitional swivel 6.5˝

transitional Half spindles – Front door (thumbpiece to knob or lever)


0530.004.A Transitional half 2.375˝

0531.004.A Transitional half 2.875˝ $150532.004.A Transitional half 3.375˝

0533.004.A Transitional half 2.25˝

0509 - 0516 Broached straight spindles – passagE

0530 - 0533 Broached Half spindles – Front door> For mounting all current Estate knobs and levers to thumbpiece of handlesets> Included with all ‘set’ orders

0519 - 0525 Broached swivel spindles – privacy

45

intErior & EntrancE HardwarE – spindlEs

spindle key

3.5˝

3.5˝

3.5˝

3.5˝

3.5˝

4˝

4˝

4.5˝

5˝

5˝

spindlE cHart

1.375˝ 1.75˝ 2˝ 2.25˝ 2.5˝

lock trim thickness

spindle Halfspindle

doorthickness:

a – .0625˝

B – .0937˝

c – .125˝

d – .1875˝

E – .25˝ Estate roses

F – .3125˝

g – .375˝

H – .435˝

i – .56˝

J– .75˝

2.25˝

2.25˝

2.25˝

2.25˝

2.25˝

2.25˝

2.25˝

2.25˝

2.25˝

2.625˝

4˝

4˝

4˝

4˝

4˝

4.5˝

4.5˝

4.5˝

5˝

5.5˝

spindle Halfspindle

2.25˝

2.25˝

2.25˝

2.25˝

2.25˝

2.25˝

2.25˝

2.375˝

2.375˝

2.875˝

4˝

4˝

4.5˝

4.5˝

4.5˝

5˝

5˝

5˝

5.5˝

5.5˝

spindle Halfspindle

2.25˝

2.25˝

2.25˝

2.25˝

2.25˝

2.375˝

2.375˝

2.375˝

2.625˝

2.875˝

4.5˝

4.5˝

4.5˝

4.5˝

5˝

5˝

5.5˝

5.5˝

6˝

6˝

spindle Halfspindle

2.25˝

2.25˝

2.25˝

2.375˝

2.375˝

2.375˝

2.875˝

2.625˝

2.625˝

2.875˝

4.5˝

5˝

5˝

5˝

5˝

5˝

5.5˝

5.5˝

6˝

6˝

spindle Halfspindle

2.375˝

2.375˝

2.375˝

2.375˝

2.875˝

2.875˝

2.875˝

2.875˝

2.875˝

2.875˝

47

mortise Bolt, tubular design> Heavy duty solid brass mortise bolt with steel housing> Smooth and positive action> Use with tubular latches for privacy/patio condition> May be installed above or below latches, depending upon visibility> Emergency release trim available at additional charge> available less turn piece (.ltp) – see next page to select a turn piece

IMPORTANT: To enable emergency trim to function, the turn piece spindle must be cut to extend no farther than halfway through the boltPACKED: One in a box with necessary fasteners and templateFSE: BHMA Designation: LO4121

intErior & EntrancE HardwarE – privacy mortisE Bolts 030, 031, 033, 034 038, 040, 050 060, 102, 112 003, 055 150, 151 056, 402Item # Description Backset Wt. 190. 260, 264 412, 4520413.xxx Contemporary Mortise Bolt 2.75˝ 0.60414.xxx Traditional Mortise Bolt 2.75˝ 0.6 $64 690418.xxx Contemporary Mortise Bolt 2.375˝ 0.50419.xxx Traditional Mortise Bolt 2.375˝ 0.5

030, 031, 033, 034 038, 040, 050 060, 102, 112 003 150, 151, 152* 055Item # Description Backset Wt. 190. 260, 264 0560413.xxx.LTP Mortise Bolt – Less Turn Piece 2.75˝ 0.4 27 300418.xxx.LTP Mortise Bolt – Less Turn Piece 2.375˝ 0.4

Mortise Bolts .LTP not available in Distressed finishes, non-distressed equalavelents 402=102, 412=112, 452=152*

0418.xxx – 2.375˝ Backset mortise Bolt0413.xxx – 2.75˝ Backset mortise Bolt

0419.xxx – 2.375˝ Backset mortise Bolt0414.xxx – 2.75˝ Backset mortise Bolt

0413 & 0418.xxx.ltp – less turn pieceorder turn piece separately (right page)

47

030, 031, 033, 034 038, 040, 050 060, 102, 112 003, 055will accommodate doors up to 2.25” 150, 151 056, 402Item # Description 190, 260, 264 412, 4526728.xxx Turn Piece6732.xxx Turn Piece6734.xxx Turn Piece6750.xxx Turn Piece $59 646751.xxx Turn Piece6756.xxx Turn Piece6764.xxx Turn Piece

For doors thicker than 2.25” order turn pieces as .ExT. 63 70

6728-6764.xxx – turn piece w/ Backplates> For interior & exterior mortise locks, tubular bolts and sectional trim

intErior & EntrancE HardwarE – turn piEcEs

6733 & 6733s.xxx

6762.xxx

6734.xxx

6728.xxx

6732.xxx

6764.xxx

6750.xxx 6751.xxx

6760 & 6760s.xxx

6756.xxx.sHt

030, 031, 033, 034 038, 040, 050 060, 102, 112 003, 055will accommodate doors up to 3” 150, 151 056, 402Item # Description 190, 260, 264 412, 4526733.xxx Turn Piece6733S.xxx* Turn Piece 6760.xxx Turn Piece $59 646760S.xxx Turn Piece6762.xxx Turn Piece

For doors thicker than 3” order turn pieces as .ExT. 63 70

*6733s & 6760s stainless steel – tier 1 finishes: 102, 112, 151, 320, 324*6733s & 6760s stainless steel not available in tier 2 finishes


49

6720.xxxTurn Knob for 6750

intErior & EntrancE HardwarE – turn knoBs / Back platEs

030, 031, 033, 034 038, 040, 050 060, 102, 112 003, 055 Matching 150, 151, 190 056, 402Item # Description Turn Piece 260, 264 412, 4526720.xxx Turn Knob 67506721.xxx Turn Knob 6751 & 67566722.xxx Turn Knob 67286724.xxx Turn Knob 6764 & 67106725.xxx Turn Knob 6732 $33 376727.xxx Turn Knob 67346729.xxx Turn Knob 6709 & 67146735.xxx# Turn Knob 6733, 6760, 67626735S.xxx*# Turn Knob 6733S, 6760STurn Knobs above .ExT (for doors thicker than 2.25˝) 37 41

*6735s stainless steel – tier 1 finishes: 102, 112, 151, 320, 324*6735s stainless steel not available in tier 2 finishes#6735 & 6735s turn knobs will fit up to 3˝ thick door (.Ext not needed/available)

6720-6729.xxx – turn knobs> For interior & Exterior Trim trim or

combined with ER trim to create a custom Turn Piece> For doors up to 2.25˝ thick> For doors thicker than 2.25˝, order .ExT – Extended Turn Knob eg. 6720.xxx.ExT




6729.xxxTurn Knob for 6709 & 6714

6721.xxxTurn Knobs for 6751 & 6756

6724.xxxTurn Knobs for 6764 & 6710

6735 & 6735s.xxxTurn Knob for 6733, 6733S

6760, 6760S, 6762

will fit up to 3˝ thick door (.Ext not needed)

030, 031, 033, 034 038, 040, 050 060, 102, 112 003, 055 150, 151, 190 056, 402Item # Description 260, 264 412, 452TK001.xxx Turn Knob TK002.xxx Turn Knob TK003.xxx Turn Knob $33 37TK004.xxx Turn Knob TK005.xxx Turn Knob Turn Knobs above .ExT (for doors thicker than 2.25˝) 37 41

tk001TK001 TK002 TK003

TK004 TK005

1˝

1˝

1˝

.7˝

1.1˝

1.1˝

.7˝

1.4˝

1.4˝ 1.4˝

.5˝

.5˝

1.5˝

1.7˝

1.8˝

.4˝.4˝

.9˝

.9˝

1˝1.6˝

.3˝

.3˝

new!

tk002TK001 TK002 TK003

TK004 TK005

1˝

1˝

1˝

.7˝

1.1˝

1.1˝

.7˝

1.4˝

1.4˝ 1.4˝

.5˝

.5˝

1.5˝

1.7˝

1.8˝

.4˝.4˝

.9˝

.9˝

1˝1.6˝

.3˝

.3˝

new!

tk003TK001 TK002 TK003

TK004 TK005

1˝

1˝

1˝

.7˝

1.1˝

1.1˝

.7˝

1.4˝

1.4˝ 1.4˝

.5˝

.5˝

1.5˝

1.7˝

1.8˝

.4˝.4˝

.9˝

.9˝

1˝1.6˝

.3˝

.3˝

new!

tk004

TK001 TK002 TK003

TK004 TK005

1˝

1˝

1˝

.7˝

1.1˝

1.1˝

.7˝

1.4˝

1.4˝ 1.4˝

.5˝

.5˝

1.5˝

1.7˝

1.8˝

.4˝.4˝

.9˝

.9˝

1˝1.6˝

.3˝

.3˝ new!

tk005

TK001 TK002 TK003

TK004 TK005

1˝

1˝

1˝

.7˝

1.1˝

1.1˝

.7˝

1.4˝

1.4˝ 1.4˝

.5˝

.5˝

1.5˝

1.7˝

1.8˝

.4˝.4˝

.9˝

.9˝

1˝1.6˝

.3˝

.3˝

new!

BackplatEs

0421 0423

030, 031, 033, 034 038, 040, 050 060, 102, 112 003, 055 150, 151, 190 056, 402Item # Description 260, 264 412, 4520421.xxx Contemporary Round Emergency Release Trim & 0417 Key w/ 6701 Cover (Stainless Steel) $33 360423.xxx 2˝ x 2˝ Square Emergency Release Trim & 0417 Key w/6701 Cover



49

030, 031, 033, 034 038, 040, 050 060, 102, 112 003, 055 150, 151, 190 056, 402Item # Description 260, 264 412, 4520403.xxx Emergency Release Trim & 0417 Key w/ 6701 Cover 0404.xxx Emergency Release Trim & 0417 Key w/ 6701 Cover 0405.xxx Emergency Release Trim & 0417 Key w/ 6701 Cover 0406.xxx Colonial Emergency Release Trim & Key $33 360407.xxx Emergency Release Trim & 0417 Key w/ 6701 Cover 0415.xxx Emergency Release Trim & 0417 Key w/ 6701 Cover 0416.xxx Emergency Release Trim & 0417 Key w/ 6701 Cover 0417.022 Emergency Release Key – Steel Finish 022 only = 55174.022 Emergency Key Supplied w/5500 Series Privacy Latches - Steel Finish 022 only = 56701.xxx Emergency Release Cover 8 106703.xxx Emergency Key – Bit Key 29 310421.xxx Contemporary Round Emergency Release Trim & 0417 Key w/ 6701 Cover (Stainless Steel) 0421S.xxx Contemporary Round Emergency Release Trim & 0417 Key w/ 6701 Cover (Stainless Steel) $33 360422.xxx Lakeshore Emergency Release Trim & 0417 Key w/6701 Cover 0423.xxx 2˝ x 2˝ Square Emergency Release Trim & 0417 Key w/6701 Cover 0423S.xxx 2˝ x 2˝ Square Emergency Release Trim & 0417 Key w/6701 Cover



0407trim and key set supplied with 0417 Emergency Release Key and 6701 Cover.


0417.022Emergency release key

IMPORTANT: To enable emergency trim to function, the turn piece must be cut to extend no farther than halfway through the bolt.




0406trim and key set supplied with 0417 Emergency Release Key.

6703.xxxEmergency Bit key Solid brass key for mortise bolts and privacy function mortise locks

0421 & 0421scontemporary round trim and key set supplied with 0417 Emergency Release Key and 6701 Cover.


0423 & 0423strim and key set supplied with 0417 Emergency Release Key and 6701 Cover.

6701.xxxEmergency release coverFEATURES: Pressure applied cover conceals emergency release opening on privacy lock function. Designed for use with escutcheon or emerency release trim.


1.75(44.5mm)

0.38(9.5mm)

1.90(48.3mm)

1.90(48.3mm)

0.38(9.5mm)

2.00(50.8mm)

2.00(50.8mm)

0.38(9.5mm)

intErior & EntrancE HardwarE – EmErgEncy rElEasE (Er) trim/BackplatE

51

intErior & EntrancE HardwarE – 2.125˝ prE-drillEd door accEssoriEs

accessories – pre-drilled doors

Item # Description

5185.009 2.125˝ Pre-drilled door adaptor $12

5090.020.A Dummy insert & filler plate 16

5185.009 – 2.125˝ pre-drilled door adaptor> Retrofits all 2.125˝ pre-bored doors allowing for Estate knob/lever installation> Works with full dummy, passage and privacy functions> Must use 2.625˝ or larger diameter rose/escutcheon to cover adaptor NOTE: This adaptor MUST be used if doors are pre-drilled

5090.020.a – dummy insert & filler plate> Used with 5185.009 adaptor to enable full dummy mounting> Conceals face plate cut-out in edge of door

5081-5082.xxx.a – closet spindle – prE-drillEd doors> For the inside of closets and low frequency use doors> Mounts with 5185.009 Adaptor for pre-bored doors only CAUTION: Closet spindles are difficult to turn and should not be used where children,

aged, or physically-handicapped people may lock themselves within a small space

closet spindles – pre-drilled doors 030, 031, 033 038, 040, 050 060, 102, 112 003, 055 150, 151, 190 056, 402 Spindle length Door thickness 260, 264 412, 452

5081.xxx.A Closet Spindle 2.625˝ 1.375˝ $40 445082.xxx.A Closet Spindle 3.375˝ 1.75˝

5081.xxx.a 5082.xxx.a

51

intErior & EntrancE HardwarE – sparE parts

030, 031, 033, 034 038, 040, 050 060, 102, 112 003, 055 150, 151 056, 402Item # Description 190, 260, 264 412, 452

0129.xxx Colonial Screw Cover $13 15

0174.xxx Rectangular Screw Base 25 29

0175.xxx Contemporary Screw Cover 11 15

0176.xxx Lakeshore Screw Base 25 29

Price

1327.009 Set Screws $1

5084.009.0002 Dummy Trim Plate 2

5085.000 Graphite Impregnated Nylon Spacer 1

5097.009.N Active Trim Back Plate 6

5197.000 Rose Retainer 2

5097.009.n – active trim Back plate> For use with ALL Estate active roses> Included with all Active rosettes

1327.009 – set screws> Included with ALL Estate knobs and levers> .25˝ Black Oxide

5197.xxx – rose retainer> Two Rose Retainers furnished standard with all

Privacy Rosettes and Privacy Adaptor Sets

5084.009.0002 – dummy trim plateThis plate can be ordered separately to convert other finishes of screw covers to a rigid mounting installation.

0129.xxx – colonial scrEw covErs > Specially designed screw cover conceals the screw head

1.0˝

5085.000 - graphite impregnated nylon spacer> Eliminates end play of trim and assures smooth operation> Included with all Privacy rosettes

.875˝

0176.xxx – lakEsHorE scrEw covErs> Specially designed screw cover conceals the screw head

DRAWING EXPORTED TO IVIEW, 07 Oct 2006, 04:06 PM, - USE PRO_E FOR ACTUAL GEOMETRYDRAWING EXPORTED TO IVIEW, 07 Oct 2006, 04:06 PM, - USE PRO_E FOR ACTUAL GEOMETRY

1.0˝ 0.25˝

0174.xxx – rEctangular scrEw BasE> Specially designed screw base

1.5˝ 0.375˝

0175.xxx – contEmporary scrEw covErs > Specially designed screw cover conceals the screw head

1.0˝

53

MORTISE BOLT INSTALLATION

* NOTE: IN SEPARATE MOUNTING APPLICATIONS, THE MINIMUM DISTANCE BETWEEN CENTER OF BOLTS IS 2.75˝.

*This minimum distance is required to allow for proper clearance between latch bolt and mortise bolt strikes (T-Strikes).

NOTE: Mortise bolt may be installed above or below tubular latch, depending upon visibility.

Drill .75˝ hole.

Drill .625˝ hole.

5097.000.NBack Plate

Use of 8474.000 Aligning Bushing will facilitate installation of trim. Trim must be in alignment with latch and spindle to prevent binding.A. Install latch and strike per template instructions.B. Insert spindle through latch.C. Position 5097.009 Back Plates over spindle and insert 8474.000 Alignment Bushings.D. Center mark and install screws into back plates and remove 8474.000 Alignment Bushings.E. Install trim.

When installing mortise bolts, ALWAYS check width of Emergency Release Trim before drilling face bore. Standard bore is .625˝ (16mm) completely through door. Emergency Release Trim 0406 and 0407 require a .5˝ (13mm) bore on outside face of door; a .625˝ (16mm) bore on inside face of door.IMPORTANT: When Emergency Release Trim is used, the turn piece spindle must be cut to extend no farther than halfway through the bolt.

tuBular latcH installation w/ aligning BusHing

intErior & EntrancE HardwarE – installation tools

installation tools

Item # Description

5198.000 Spanner Tool $2

8474.000 Aligning Bushing (box of 50) 14

8480.000 Aligning Tool & Bushing 10

8481.000.001 Socket Wrench 6

8481.000.001 – socket wrench> For all knob and lever installations

8480.000 – aligning tool & Bushing> For use in proper alignment of knobs/levers and

roses with mortise locks and tubular latches

8474.000 – aligning Bushing> Box of 50

5198.000 – spanner tool> Used to xxxxxxxxx> One Spanner Tool furnished standard with all Privacy

Rosettes and Privacy Adaptor Sets.

8474.000Alignment Bushing

53

communicating door kit: For use in conjunction with Baldwin patio deadbolt Includes: swivel spindle, rose and screw cover for oppsite side of Communicating Door

Function: Security between (hotel) rooms with limited space between doors

Communicating door side compatible with any LARGE thread-on rose style (5048 rose included)

NOT compatible with Images snap-on rose chassis

Immediate availability in standard Estate finishes

communicating doors— hospitality —

Commonly found between two hotel rooms where a functional latch is still required, and limited space between doors does not allow for trim to be installed on exterior sides.

Security between rooms is accomplished with a standard patio dead bolt. Latch & trim offer normal passage functionality on interior, while completing the aesthetic requirement of a complete trim set on the door.

Door kits include all components needed to complete communicating door installation:

Estate 5048 thread-on passage rose and 0129 screw cover

Components 1 – 6 shown below

Kits designed to work with standard communicating door thickness of 1.75”

Components also available separately, please contact Baldwin Customer Service for details

LIST PRICING

sku tier 1 tier 2

5187.xxx $62 $67

1) 0529.028.T5212 Swivel Spindle Assembly 2) 5048.150.05102 Rose 3) 8480.800.00015 Alignment Bushing 4) 0129.039.00025 Back Plate 5) 1141.028.00009 10-32 x 1/2 Bolt6) 0129.150.00015 Colonial Screw Cover

55

*WARNING: Double cylinder functions on any application used for Egress may present a safety hazard in times of emergency. Installation should be in accordance with local codes.

Outside Outside Outside Outside Inside

Inside Inside Inside

ENTRANCE(ENTR)

ENTRANCE*DOUBLE CYLINDER

(DBLC)

FULL DUMMY(FD)

BACK TO BACK(BB75)

Inside

ENTRANCE(ENTR)

ENTRANCE*DOUBLE CYLINDER

(DBLC)

EntrancE trim – symBology

Outside InsideOutside

FULL DUMMY(FD)

InsideOutside

EscutcHEon platE conFigurations – ordered in half pairs except for privacy (.KP) cut-outs which are ordered in pairs.

ENTRANCE(KNOB HOLE)

ENTRANCE(KNOB AND

CYLINDER HOLE)

PRIVACY(KNOB AND TURNPIECE ATTACHED)

EMERGENCY RELEASE(KNOB AND ER HOLE)

PRIVACY PIN* (KNOB AND PRIVACY PIN HOLE)

*NOT AVAILABLE ON ALL ESCUTCHEONS

.kn .kc .kt .kE .kp

55

EntrancE trim – tErminology

CONCEALS CYLINDRICAL

CUT-OUT

This symbol signifies that the illustrated lock trim will cover most single cylindrical cut-outs when used with appropriate backset mortise lock. Individual conditions should be examined to confirm acceptability.

(1) Single Cylindrical Cut-out

EscutcHEon trimsFunction descriptioncode .ENTR Active Entrance Trim – Knobs, Levers.RENT Right-handed Active Handleset – Levers .LENT Left-handed Active Handleset – Levers.DBLC Double Cylinder Active Entrance Trim.FD Full Dummy Trim.RFD Right-Handed Full Dummy.LFD Left-Handed Full Dummy.BB75 Back to Back Entrance Trims 1 ¾” Doors.BB30 Back to Back Entrance Trims up to 3” Doors.BBFD Back to Back Full Dummy.KC Knob and Cylinder Hole.KT Knob and Turn Piece Attached.KN Knob Hole.KP Knob and Privacy Button Hole (only sold in Pairs).KE Knob and Emergency Release Hole.KCIS Cut for Cylinder Inside*.KEIS Cut for Emergency Release Inside*.KNIS Cut for Knob Inside*.KTIS Cut for Turn Piece Inside*.KCOS Cut for Cylinder Outside **.KEOS Cut for Emergency Release Outside**.KNOS Cut for Knob Outside**.KTOS Cut for Turn Piece Outside**

*Surface Mounted Thru-Bolt** Thru-Bolted (No Surface Screws)

mortisE locksFunction descriptioncode .R Right-handed Mortise Lock (Knobs).L Left -handed Mortise Lock (Knobs).RLS Right-handed Mortise Lock Lever Strength (Levers).LLS Left-handed Mortise Lock Lever Strength (Levers).RR Right-handed Reverse Bevel Mortise Lock (Knobs).LL Left-handed Reverse Bevel Mortise Lock (Knobs).RRLS Right-handed Reverse Bevel Mortise Lock Lever Strength (Levers).LRLS Left-handed Reverse Bevel Mortise Lock Lever Strength (Levers).LRB1 Right-handed Reverse Bevel Mortise Lock Lever Strength (Levers) w/ 1˝ Front.RRB1 Left-handed Reverse Bevel Mortise Lock Lever Strength (Levers) w/ 1˝ Front

prE-drillEd doors

57

20

1

5

24

21

10

10

9

18

1516

17

18

6

19

14

7

13

810

14

22

2312

2

3

4

21

21

11

Item Qty Part No. Part Name 1 1 6420.xxx.00052 Cylinder Collar 2 1 6420.xxx.00012 Large Plate 3 1 6420.xxx.00022 Small Plate 4 1 2598.xxx.00013 Door Pull 5 1 5300.xxx.95115 Thumbpiece 6 1 6420.xxx.KT012 Inside Escutcheon 7 1 5350.xxx.00023 Turn Knob 8 1 5064.xxx.00013 Knob-rope 9 1 0129.xxx.00013 Screw Cover 10 1 5300.000.05205 Fastener Packet (Pull/knob) 11 1 5300.228.97085 Alignment Bracket 12 2 1704.039.00115 Threaded Adaptor 13 1 6747.xxx.00013 Thimble 14 1 1005.xxx.05105 Fastener Packet (Inside Plate) 15 1 5196.109.00005 Wave Washer 16 1 8053.509.00015 Plate-tailpiece 17 2 1117.509.00009 #3-48 x .313˝ Lg., Fh, Ph, M/s 18 1 5300.000.93505 Fastener Packet (Egress Cartridge) 19 1 5300.000.95505 Rectangular Egress Cartridge Assembly 20 1 8031.xxx.05255 Cylinder Assembly 21 1 5300.000.93205 Spindle/spacer Packet 22 1 5300.028.99055 Mounting Post 23 2 10009.329.00009 #6-32 x .44˝ Lg., Fh, Ph, M/s 24 1 5300.000.95995 Thumb Cartridge Assembly

Not Shown On Drawing 25 1 5300.xxx.95105 Latch Assembly With Faceplate 26 1 8000.xxx.STR15 Strike 27 2 8000.1849.STR35 Dust Box 28 1 8053.xxx.00032 Cylinder Cap 29 1 8208.xxx.DBC15 Deadbolt Assembly (Egress) 30 1 8510.xxx.01135 T-strike 31 1 1013.221.05275 Fastener Packet (Strike) 32 1 1421.028.05105 Fastener Packet (Strike) 33 1 2510.221.00009 Fastener Packet (Latch And Deadbolt) 34 1 Pk.6415 Installation Instructions 35 1 Pk.1082 Images Strike Marking Template 36 1 Pk.1215 Estate Marking Template 37 1 Pk.1149T Lifetime Limited Finish/mechanical Warranty

tuBular – EntrancE sEts

specifications & standards of Excellence Estate lock sets are featured in traditional styles in our most popular finishes. Interior latch set designs coordinate beautifully with lockset styles to enable customers to carry a specific design theme throughout the home. Each Estate lockset is packed as a complete set, and is also available by component.mechanical Features—escutcheon trim lock sets

> SOLID FORGED BRASS: Entrance handle, escutcheon, knob, rose and turn piece are manu-factured of solid forged brass for maximum Strength and durability.

> INSTALLATION: Lock sets are designed for easy installation in standard pre-bored wood or metal doors. The adaptor aligns the latch with the trim. Graphic instructions make installa-tion FAST!

> FULLY REVERSIBLE: Accommodates all door conditions and facilitates installation.

> DOOR THICKNESS: Lock sets accommodate a door thickness of 1.75˝ (44mm). Conversion kit available for 2.0˝ (51mm) and 2.25˝ (57mm) thick doors (see price list for details).

> CASE: Deadbolt and latch case are formed of steel for Strength. Most interior working parts are made of solid brass or zinc chromate plated steel for maximum Strength and smooth operation.

> BACKSET: Adjustable backset 2.375˝ (60mm), 2.75˝ (70mm) latch and deadbolt supplied standard.

> FACE PLATE: Deadbolt and latch supplied with a 1˝ (25mm) face plate.

> STRIKE: Deadbolt is furnished with a specially designed reinforcing strike constructed of high grade steel for ultimate Strength and durability. The strike is installed with two (2) 3˝ (76mm) security jamb screws and a dust box. The security strike is covered with an armored front to conceal the fasteners. Latches are supplied standard with a box strike (other strikes are available at an additional charge).

> DISTANCE BETWEEN CENTER OF LATCH AND DEADBOLT (CTC): Lockset accommodates 5.5˝ (140mm) center to center dimension ONLY.

> BOLT: Deadbolt and latch bolt constructed of solid brass. Deadbolt has 1˝ (25mm) throw when extended and a hardened steel insert for maximum protection and security. Latch bolt has a .5˝ (13mm) throw when extended to fully engage the door jamb.

> CYLINDER: Cylinder supplied with 5-pin keying.

> KEYS: Designed with a 1.25˝ (32mm) wide bow surface to facilitate use by physically chal-lenged people.

> Numerous patents, copyrights, and trademarks are held by the Corporation to protect the integrity and reputation of our distinctive line of hardware appointments.

57

6401 – dEvonsHirE™ EntrancE

LEVER: 5152Available as pre-pack set only. Includes emergency egress on active set. Split finish available.


CUT-OUT


6401.xxx.RENT Single cylinder handleset with RIGHT lever, emergency egress 8.3 $589 635

6401.xxx.LENT Single cylinder handleset with LEFT lever, emergency egress 8.3 589 635

6401.xxx.RFD Full dummy set with RIGHT lever 6.2 497 543

6401.xxx.LFD Full dummy set with LEFT lever 6.2 497 543

6401.xxx.ENTR Single cylinder handleset emergency egress 8.3 522 557

6401.xxx.FD Full dummy set 6.2 430 466

Adjustable backset latch and deadbolt – 2.375˝ & 2.75˝

tuBular – EntrancE sEts

59

0.56 �(14.3mm)

10.75 �(273.1mm)

2.70 �(68.6mm)

2.74 �(69.5mm) 0.56 �

(14.3mm)

2.70 �(68.6mm)

10.75 �(273.11mm)

2.74 �(69.5mm)

0.56 �(14.3mm)

10.75 �(273.1mm)

17.38 �(441.3mm)

4.25 �(108.0mm)

2.73 �(69.4mm)

0.56 �(14.3mm)

3.94 �(100.0mm)

4.69 �(119.1mm)

3.08 �(78.2mm)

2.72 �(69.1mm)

6515 Interior Escutcheon.KT Includes: 6725 Turn Knob

6516.xxx.Entroval Edinburgh set includes:6639 Exterior Trim6515 Interior Escutcheon – .KT5031 Knob – .MR 0533.004 2.25˝ Half Spindle

must also order:Mortise LockCylinder – 8325 for 1.75˝ door

6639 TrimIncludes: 2620 Pull

EntrancE trim – EdinBurgH



Trim width: 2.75˝trim thickness: .56˝ – i

6515.xxx.EntrEdinburgh sectional set includes:6638 Exterior Trim6515 Interior Escutcheon – .KT5031 Knob – .MR 0530 2.375˝ Half Spindle


tubular ships packaged complete


6515.xxx.ENTR Entrance Trim – Edinburgh sectional Set 6515.xxx.DBLC Double Cylinder Set $439 4856515.xxx.FD Full Dummy Set

6515.xxx.ENFD* 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 878* 970*

6638.xxx Active Exterior Trim Each 317 3416638.xxx.DM Dummy Exterior Trim Each

6516.xxx.ENTR Entrance Trim – oval Edinburgh Set 6516.xxx.DBLC Double Cylinder Set $439 4856516.xxx.FD Full Dummy Set


Interior Escutcheon – 6515.xxx.KC Cut for Cylinder (KC), Double Cylinder Each 127 1476515.xxx.KE Cut for Emergency Release (KE) Each6515.xxx.KN Cut for Knob (KN), Passage/Dummy Each

6515.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 159 184

NOTE: 030 is not available with Entry Trim or KC escutcheons

*.ENFD only available in 038, 050, 112 & 190, to ensure a finish match on all components.

EdinBurgH tuBular6415.xxx.ENTR Single cylinder handleset with interior knob 7.5 $531 577

6415.xxx.FD Full dummy set with interior knob 5.7 439 485

6416.xxx.ENTR Single cylinder handleset with interior knob 9.0 531 577


6450.xxx.ENTR Single cylinder knob set 8.1 503 562

6450.xxx.FD Full dummy knob set 5.6 411 469


6515 – Edinburgh sectional


CUT-OUT

TUBULAR:Available as pre-pack set with 5031 knob ONLY. Includes emergency egress on active set. Split finish available.

TUBULAR

6415 6416 6450

ExT

ExT

INTE

RIOR

SET

SET

mortisE

59

EntrancE trim – EdinBurgH

SEE BACK COVER FLAP for easy-ordering charts and requirements for doors thicker than 1.75˝

6515.xxx.dBlcEdinburgh sectional set includes:6638 Exterior Trim6515 Interior Escutcheon – .KC5031 Knob – .IMR0530 2.375˝ Half Spindle

6515.xxx.FdEdinburgh sectional set includes:6638 Exterior Trim – .DM6515 Interior Escutcheon – .KN5031 Knob – . IMR5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

ordering a la carte (Entrance)6638 Exterior Trim6515 Interior Escutcheon – .KT5122 Lever – .RMR (.LMR)

ordering a la carte (Entrance):6515 Exterior Trim – .KC6515 Interior Escutcheon – .KT5031 Knobs, pair – .MR

ordering a la carte (double cylinder):6515 Exterior Trim – .KC6515 Interior Escutcheon – .KC5031 Knobs, pair – .MR

ordering a la carte (privacy):6515 Exterior Trim – .KE6515 Interior Escutcheon – .KT5031 Knobs, pair – .MR

ordering a la carte (passage):6515 (2) Interior Escutcheons – .KN 5031 Knobs, pair – .MR

BACK-TO-BACK MOUNTINGNOT AVAILABLE

FOR THIS TRIM STYLE

6516.xxx.dBlcoval Edinburgh set includes:6639 Exterior Trim6515 Interior Escutcheon – .KC5031 Knob – .IMR0530 2.375˝ Half Spindle

6516.xxx.Fdoval Edinburgh set includes:6639 Exterior Trim – .DM6515 Interior Escutcheon – .KN5031 Knob – . IMR5092 1.125˝ Dummy Spindle6761 Dummy Cylinder



FOR THIS TRIM STYLE

61


6520.xxx.ENTR Entrance Trim Set 6520.xxx.DBLC Double Cylinder Set $439 4856520.xxx.FD Full Dummy Set



Interior Escutcheon – 6520.xxx.KC Cut for Cylinder (KC), Double Cylinder Each 127** 1476520.xxx.KE Cut for Emergency Release (KE) Each6520.xxx.KN Cut for Knob (KN), Passage/Dummy Each




Bristol tuBular6420.xxx.ENTR Single cylinder handleset with interior knob 8.7 $531 577



EntrancE trim – Bristol



6520.xxx.EntrBristol sectional set includes:6640 Exterior Trim6520 Interior Escutcheon – .KT5064 Knob – .IMR0530 2.375˝ Half Spindle



2.72 �(69.1mm)

2.23 �(56.6mm)

9.98 �(253.5mm)

0.56 �(14.3mm)

0.56 �(14.3mm)

3.87 �(98.3mm)

4.63 �(117.7mm)

3.68 �(93.5mm)

2.85 �(72.3mm)


ALTERNATIVE KNOBS & LEVERS WE SUGGEST:

5103 Lever5100 Lever

5066 Knob 5068 Knob


CUT-OUT

TUBULAR:Available as pre-pack set with 5064 knob ONLY. Includes emergency egress on active set. Split finish available.

0.56 �(14.3mm)

9.98 �(253.5mm)

2.23 �(56.6mm)

2.74 �(69.5mm)

TUBULAR

ExT

INTE

RIOR

SET

mortisE

61

6520.xxx.dBlcBristol sectional set includes:6640 Exterior Trim6520 Interior Escutcheon – .KC5064 Knob – .IMR0530 2.375˝ Half Spindle

must also order: Mortise LockDouble CylinderBlocking Ring

6520.xxx.FdBristol sectional set includes:6640 Exterior Trim – .DM6520 Interior Escutcheon – .KN5064 Knob – . IMR5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na


must also order: Mortise Lock – Lever StrengthCylinderSpindle


must also order:Mortise LockCylinderSpindle


must also order: Mortise LockCylinderBlocking RingSpindle

ordering a la carte (privacy):6520 Exterior Trim – .KE Includes 6701 ER cover6520 Interior Escutcheon – .KT5064 Knobs, pair – .MR

must also order: Latch and Mortise Bolt or Mortise LockSpindle


must also order: Latch or Interior Mortise LockSpindle

EntrancE trim – Bristol


FOR THIS TRIM STYLE


63

0.56(14.2mm)

12.62(320.5mm)

2.88(73.2mm)

3.90(99.0mm)

3.28(83.3mm)

0.56(14.2mm)

6.50(165.1mm)

CTC

18.27(464.1mm)

12.62(320.5mm)

2.25(57.2mm)

3.53(89.7mm)

3.28(83.3mm)


6526.xxx.RENT (LENT) Entrance Trim Set 6526.xxx.RDBL (LDBL) Double Cylinder Set $439 4856526.xxx.RFD (LFD) Full Dummy Set






kEnsington® tuBular6426.xxx.RENT Single cylinder handleset with RIGHT lever, emergency egress 10.8 $531 5776426.xxx.LENT Single cylinder handleset with LEFT lever, emergency egress

6426.xxx.RFD Full dummy set with RIGHT lever 8.5 439 4856426.xxx.LFD Full dummy set with LEFT lever


EntrancE trim – kEnsington




6526.xxx.rEnt (lEnt)kensington ii set includes:6643 Exterior Trim6525 Interior Escutcheon – .KT5108 Lever – .RMR (LMR)0530 2.375˝ Half Spindle

mortise must also order:Mortise Lock – Lever StrengthCylinder – 8325 for 1.75˝ door


TUBULAR:Available as pre-pack set with 5108 lever ONLY. Includes emergency egress on active set. Split finish available.

0.56(14.2mm)

12.62(320.5mm)

2.88(73.2mm)

3.90(99.0mm)

3.28(83.3mm)


CUT-OUT

TUBULAR

ExT

INTE

RIOR

SET

mortisE

63

6526.xxx.dBlckensington ii set includes:6643 Exterior Trim6525 Interior Escutcheon – .KC5108 Lever – .RMR (LMR)0530 2.375˝ Half Spindle

must also order: Mortise Lock – Lever StrengthDouble CylinderBlocking Ring

6526.xxx.rFd (lFd)kensington ii set includes:6643 Exterior Trim – .DM6525 Interior Escutcheon – .KN5108 Lever – .RMR (LMR)5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na


must also order:

Mortise Lock – Lever StrengthCylinderSpindle

ordering a la carte (Entrance):6525 Exterior Trim – .KC6525 Interior Escutcheon – .KT5108 Levers, pair – .MR


ordering a la carte (double cylinder):6525 Exterior Trim – .KC6525 Interior Escutcheon – .KC5108 Levers, pair – .MR

must also order: Mortise Lock – Lever StrengthDouble CylinderBlocking RingSpindle

ordering a la carte (privacy):6525 Exterior Trim – .KE Includes 6701 ER cover6525 Interior Escutcheon – .KT5108 Levers, pair – .MR


ordering a la carte (passage):6525 (2) Interior Escutcheons – .KN 5108 Levers, pair – .MR


EntrancE trim – kEnsington


FOR THIS TRIM STYLE


65

2.5˝

2.2˝

8˝

.2˝2.5˝

10˝

2.5˝

2˝

.9˝


6540.xxx.ENTR Entrance Trim Set 9.56540.xxx.DBLC Double Cylinder Set $433 4996540.xxx.FD Full Dummy Set










5161 Lever

5165 Lever5164 Lever5162 Lever

ALTERNATIVE TURN KNOBS WE SUGGEST:

5055 Knob6735 Turn Knob

Trim width: 2.5˝trim thickness: .093˝ – B

6540.xxx.Entrsan diego set includes:6603 Exterior Trim6763 Interior Escutcheon – .KT5039 Knob – .IMR0530 2.375˝ Half Spindle


EntrancE trim – san diEgo

ExT

INTE

RIOR

SET

65

6540.xxx.dBlcsan diego set includes:6603 Exterior Trim6763 Interior Escutcheon – .KC5039 Knob – .IMR0530 2.375˝ Half Spindle


6540.xxx.Fdsan diego set includes:6603 Exterior Trim – .DM6763 Interior Escutcheon – .KN5039 Knob – . IMR5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na

ordering a la carte (Entrance)(with different turn knob & lever):6603 Exterior Trim6763 Interior Escutcheon – .KE (.KE is cut for ER trim or Turn Knob – if standard Turn Knob is desired, order .KT)6735 Turn Knob5161 Lever – .RMR (.LMR)



must also order: Mortise LockCylinderSpindle


must also order: Mortise LockDouble CylinderBlocking RingSpindle





EntrancE trim – san diEgo


FOR THIS TRIM STYLE


67

2.25˝

11.9˝

2.1˝

.3˝

2.2˝

11.9˝

2.25˝1.4˝

2.1˝

2.2˝




6975.xxx Active Exterior Trim only Each 214 2446975.xxx.DM Dummy Exterior only Each



6975.xxx.KP Escutcheons Cut for Privacy (KP) Pair 337 384



EntrancE trim – san Francisco

6975 Trim – .KC



5100 Lever


5064 Knob

trim thickness: .125˝ – c

6541.xxx.Entrsan Francisco set includes:6975 Exterior Trim – .KC6975 Interior Escutcheon – .KT5020 Knobs, pair – .MR0520 3.5˝ Swivel Spindle


5065 Knob

ExT

INTE

RIOR

SET

67

6541.xxx.dBlcsan Francisco set includes:6975 Exterior Trim – .KC6975 Interior Escutcheon – .KC5020 Knobs, pair – .MR0520 3.5˝ Swivel Spindle

must also order:Mortise LockDouble CylinderBlocking Ring

6541.xxx.Fdsan Francisco set includes:6975 (2) Interior Escutcheons – .KN 5020 Knobs, pair – .MR0510 3.5˝ Straight Spindle

must also order: na

ordering a la carte (Entrance)(with different knob):6975 Exterior Trim – .KC6975 Interior Escutcheon – .KT5057 Knobs, pair – .MR

must also order:Mortise LockCylinderSpindle

ordering a la carte (privacy):6975 Exterior Trim – .KE Includes 6701 ER cover6975 Interior Escutcheon – .KT or .KP5020 Knobs, pair – .MR



must also order: Latch and Mortise Bolt or Mortise Lock or Privacy LatchSpindle

EntrancE trim –san Francisco


Available .KP w/ Privacy Pin instead of Turn Knob

69




6605.xxx.BB75 Entrance Back-to-Back Set6605.xxx.BB30 Entrance Back-to-Back Set 1067 12216605.xxx.BBFD Dummy Back-to-Back Set







EntrancE trim – trEmont




5161 Lever




6542.xxx.Entrtremont set includes:6605 Exterior Trim6796 Interior Escutcheon – .KT5020 Knob – .IMR0531 2.875˝ Half Spindle


3.3˝

17˝

2.5˝

7˝

.8˝ 3.3˝

11˝

1.9˝

2.6˝

2.1˝

Trim width: 3.3˝trim thickness: .75˝ – J


CUT-OUT

ExT

INTE

RIOR

SET

69

6542.xxx.dBlctremont set includes:6605 Exterior Trim6796 Interior Escutcheon – .KC5020 Knob – .IMR0531 2.875˝ Half Spindle


6542.xxx.Fdtremont set includes:6605 Exterior Trim – .DM6796 Interior Escutcheon – .KN5020 Knob – . IMR5077 1.5˝ Dummy Spindle6761 Dummy Cylinder

must also order: na











EntrancE trim – trEmont

6605.xxx.BB75 (BB30, BBFd)(Back-to-Back Entrance)tremont set includes:6605 (2) Exterior Trims

must also order: Mortise Lock Double Cylinder Blocking Ring



71

EntrancE trim – lancastEr / Boston




5106 Lever

6543.xxx.Entrlancaster set includes:6635 Exterior Trim6797 Interior Escutcheon – .KT5000 Knob – .IMR0530 2.375˝ Half Spindle


2.75˝

16˝

6˝

10˝

2.75˝.9˝

.1˝

2˝

2.2˝



6543.xxx.ENTR Entrance Trim – lancaster Set 9.56543.xxx.DBLC Double Cylinder Set $433 4996543.xxx.FD Full Dummy Set


6635.xxx.BB75 Entrance Back-to-Back – 1.75˝ door Set 6635.xxx.BB30 Entrance Back-to-Back – up to 3˝ door Set 661 7456635.xxx.BBFD Dummy Back-to-Back Set


6555.xxx.ENTR Entrance Trim – Boston Set 4.26555.xxx.DBLC Double Cylinder Set 342 3946555.xxx.FD Full Dummy Set

6555.xxx.ENFD* 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 684 796







CUT-OUT

5025 Knob

ExT

INTE

RIOR

SET

SET

71

6543.xxx.dBlclancaster set includes:6635 Exterior Trim6797 Interior Escutcheon – .KC5000 Knob – .IMR0530 2.375˝ Half Spindle


6543.xxx.Fdlancaster set includes:6635 Exterior Trim – .DM6797 Interior Escutcheon – .KN5000 Knob – . IMR5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na

ordering a la carte (Entrance)(with different lever):6635 Exterior Trim6797 Interior Escutcheon – .KT5106 Lever – .RMR (.LMR)


6555.xxx.EntrBoston set includes:6797 Exterior Trim – .KC6797 Interior Escutcheon – .KT5000 Knobs, pair – .MR0520 3.5˝ Swivel Spindle

must also order: Mortise LockCylinder

6555.xxx.dBlcBoston set includes:6797 Exterior Trim – .KC6797 Interior Escutcheon – .KC5000 Knobs, pair – .MR0520 3.5˝ Swivel Spindle


6555.xxx.FdBoston set includes:6797 (2) Interior Escutcheons – .KN 5000 Knobs, pair – .MR0510 3.5˝ Straight Spindle

must also order: na



EntrancE trim – lancastEr / Boston

6635.xxx.BB75 (BB30, BBFd)(Back-to-Back Entrance)lancaster set includes:6635 (2) Exterior Trims




73

EntrancE trim – Hamilton / stanFord




6544.xxx.RENT (LENT) Entrance Trim – Hamilton Set 9.06544.xxx.RDBL (LDBL) Double Cylinder Set $712 8136544.xxx.RFD (LFD) Full Dummy Set


6622.xxx.BB75 Entrance Back-to-Back – 1.75˝ door Set 1067 12216622.xxx.BB30 Entrance Back-to-Back – up to 3˝ door Set

6622.xxx.BBFD Dummy Back-to-Back Set


6951.xxx.ENTR Entrance Trim – stanford Set 6.06951.xxx.DBLC Double Cylinder Set 427 4886951.xxx.FD Full Dummy Set








5025 Knob 5064 Knob

3.4˝

17˝

2.9˝

7˝

.8˝ 3.4˝

10.8˝

3.9˝ 2.9˝

1.8˝


6544.xxx.rEnt (lEnt)Hamilton set includes:6622 Exterior Trim6791 Interior Escutcheon – .KT5152 Lever – .RMR (LMR)0531 2.875˝ Half Spindle

must also order:Mortise Lock – Lever StrengthCylinder – 8326 for 1.75˝ door


CUT-OUT

ExT

INTE

RIOR

SET

SET

73

6544.xxx.rdBl (ldBl)Hamilton set includes:6622 Exterior Trim6791 Interior Escutcheon – .KC5152 Lever – .RMR (LMR)0531 2.875˝ Half Spindle

must also order: Mortise Lock– Lever StrengthDouble CylinderBlocking Ring

6544.xxx.rFd (lFd)Hamilton set includes:6622 Exterior Trim – .DM6791 Interior Escutcheon – .KN5152 Lever – .RMR (LMR)5077 1.5˝ Dummy Spindle6761 Dummy Cylinder

must also order: na

ordering a la carte (Entrance)(with different turn knob & lever):6622 Exterior Trim6791 Interior Escutcheon – .KT5064 Knob – .IMR

must also order: Mortise Lock CylinderSpindle

6951.xxx.Entrstanford set includes:6791 Exterior Trim – .KC6791 Interior Escutcheon – .KT5152 Levers, pair – .MR0524 5.5˝ Swivel Spindle

must also order: Mortise Lock– Lever StrengthCylinder Spindle

6951.xxx.dBlcstanford set includes:6791 Exterior Trim – .KC6791 Interior Escutcheon – .KC5152 Levers, pair – .MR0524 5.5˝ Swivel Spindle

must also order: Mortise Lock– Lever StrengthDouble CylinderBlocking RingSpindle

6951.xxx.Fdstanford set includes:6791 (2) Interior Escutcheons – .KN 5152 Levers, pair – .MR0514 5.5˝ Straight Spindle

must also order: na

ordering a la carte (privacy):6791 Interior Escutcheon – .KE Includes 6701 ER cover6791 Interior Escutcheon – .KT5152 Levers, pair – .MR


6622.xxx.BB75 (BB30, BBFd)(Back-to-Back Entrance)Hamilton set includes:6622 (2) Exterior Trims


EntrancE trim – Hamilton / stanFord


75

EntrancE trim – EmpirE / rEpuBlic



Item # Description Wt. 063 FINISH ONLY

6545.063.ENTR Entrance Trim– Empire Set 9.56545.063.DBLC Double Cylinder Set $712 6545.063.FD Full Dummy Set

6545.xxx.ENFD* 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 1424

6607.063.BB75 Entrance Back-to-Back – 1.75˝ door Set 6607.063.BB30 Entrance Back-to-Back – up to 3˝ door Set 10676607.063.BBFD Dummy Back-to-Back Set

6607.063 Active Exterior Trim only Each 5346607.063.DM Dummy Exterior only Each

6935.063.ENTR Entrance Trim– republic Set 6.86935.063.DBLC Double Cylinder Set $4276935.063.FD Full Dummy Set

6935.xxx.ENFD* 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 854

6792.063 Active Exterior Trim only Each 2146792.063.RDM (LDM) Dummy Exterior only Each

Interior Escutcheon – 6792.063.KC Cut for Cylinder (KC), Double Cylinder Each 1686792.063.KE Cut for Emergency Release (KE) Each6792.063.KN Cut for Knob (KN), Passage/Dummy Each

6792.063.KT Interior Escutcheon w/ Turn Knob (KT) Each 208

6792.063.KP Escutcheons Cut for Privacy (KP) Pair 337

NOTE: 030 is not available with Entry trim063 Finish = combination of polished chrome (260) and pvd polished Brass (003)


5162 Lever

6720 Turn Knob 5066 Knob

17˝

3.3˝

.8˝

7˝

2.5˝

11˝

3.1˝

2˝

1.5˝3.3˝


6545.xxx.EntrEmpire set includes:6607 Exterior Trim6792 Interior Escutcheon – .KT5039 Knob – .IMR0531 2.875˝ Half Spindle



CUT-OUT

ExT

ExT

INTE

RIOR

SET

SET

75

Empire set .dBlc includes:6607 Exterior Trim6792 Interior Escutcheon – .KC5039 Knobs, pair – .MR0531 2.875˝ Half Spindle

Empire set .Fd includes:6607 Exterior Trim – .DM6792 Interior Escutcheon – .KN5039 Knobs, pair – .MR5077 1.5˝ Dummy Spindle6761 Dummy Cylinder




ordering a la carte (privacy):6792 Exterior Trim – .KE6792 Interior Escutcheon – .KT or .KP5039 Knobs, pair – .MR

6607.xxx.BB75 (BB30, BBFd)(Back-to-Back Entrance)Empire set includes:6607 (2) Exterior Trims



6935.063.Entrrepublic set includes:6792 Exterior Escutcheon – .KC6792 Interior Escutcheon – .KT5125 Levers, pair – .MR0524 5.5˝ Swivel Spindle

6935.063.dBlcrepublic set includes:6792 Exterior Escutcheon – .KC6792 Interior Escutcheon – .KC5125 Levers, pair – .MR0524 5.5˝ Swivel Spindle

6935.063.Fdrepublic set includes:6792 (2) Interior Escutcheons – .KN 5125 Levers, pair – .MR0514 5.5˝ Straight Spindle



77

2.8˝

10˝

2.2˝

.4˝

10˝

2.8˝ 1.4˝

2.1˝

2.1˝




6547.xxx.DM Dummy Exterior only Each 214 244






EntrancE trim – nasHvillE

6793 Trim – .KC




5066 Knob


6547.xxx.Entrnashville set includes:6793 Exterior Trim6793 Interior Escutcheon – .KT5020 Knobs, pair – .MR0522 4˝ Swivel Spindle


5068 Knob5064 Knob


CUT-OUT

ExT

INTE

RIOR

SET

77

6547.xxx.dBlcnashville set includes:6793 Exterior Trim – .KC6793 Interior Escutcheon – .KC5020 Knobs, pair – .MR0522 4˝ Swivel Spindle


6547.xxx.Fdnashville set includes:6793 (2) Interior Escutcheons – .KN 5020 Knobs, pair – .MR0512 4˝ Straight Spindle

must also order: na

ordering a la carte (Entrance)(with different knob):6793 Exterior Trim6793 Interior Escutcheon – .KT5068 Knobs, pair – .MR






EntrancE trim – nasHvillE



79

2.8˝

16.5˝

2.25˝ 3˝

4.5˝

10.1˝

.3˝

6.75˝

4˝2.25˝

2˝

3˝

.9˝

6.5˝

EntrancE trim – williamsBurg / gEorgEtown



Trim width: 2.75˝trim thickness: .3125˝ – F

interior trim thickness: .875˝ – k

notE: not available for reverse Bevel conditionsnot available for doors thicker than 3˝

6549.xxx.rEnt (lEnt)williamsburg set includes:6628 Exterior Trim6505 Interior Escutcheon – .KT5000 Knob – .IMR0531 2.875˝ Half Spindle



6549.xxx.RENT (LENT) Entrance Trim – williamsburg Set 9.56549.xxx.RDBL (LDBL) Double Cylinder Set $433 4996549.xxx.RFD (LFD) Full Dummy Set




6550.xxx.RENT (LENT) Entrance Trim – georgetown Set 6550.xxx.RDBL (LDBL) Double Cylinder Set 342 3946550.xxx.RFD (LFD) Full Dummy Set


Interior Escutcheon – 6505.xxx.RKC (LKC) Cut for Cylinder (KC), Double Cylinder Each 85 996505.xxx.RKE (LKE) Cut for Emergency Release (KE) Each6505.xxx.RKN (LKN) Cut for Knob (KN), Passage/Dummy Each

6505.xxx.RKT (LKT) Interior Escutcheon w/ Turn Knob (KT) Each 108 123




CUT-OUT


5106 Lever5025 Knob

ExT

INTE

RIOR

SET

SET

79

6549.xxx.rdBl (ldBl)williamsburg set includes:6628 Exterior Trim6505 Interior Escutcheon – .KC5000 Knob – .IMR0531 2.875˝ Half Spindle


6549.xxx.rFd (lFd)williamsburg set includes:6628 Exterior Trim – .DM6505 Interior Escutcheon – .KN5000 Knob – . IMR5077 1.5˝ Dummy Spindle6761 Dummy Cylinder

must also order: na



6550.xxx.rEnt (lEnt)georgetown set includes:6757 Cylinder Collar 5002 Rose for Exterior6505 Interior Escutcheon – .KT5000 Knobs, pair – .MR0526 4.5˝ Swivel Spindle must also order: Mortise LockCylinder

6550.xxx.rdBl (ldBl)georgetown set includes:6757 Cylinder Collar 5002 Rose for Exterior6505 Interior Escutcheon – .KC5000 Knobs, pair – .MR0526 4.5˝ Swivel Spindle


6550.xxx.rFd (lFd)georgetown set includes:5002 Rose for Exterior6505 Interior Escutcheon – .KN5000 Knobs, pair – .MR0512 4.5˝ Straight Spindle

must also order: na

ordering a la carte (privacy):6505 Interior Escutcheon – .KT5000 Knobs, pair – .MR5002 Rose for Exterior

must also order: Latch and Mortise Bolt or Mortise LockSpindle ER Trim

EntrancE trim – williamsBurg / gEorgEtown

6628.xxx.BB75 (BB30, BBFd)(Back-to-Back Entrance)williamsburg set includes:6628 (2) Exterior Trims



ER Trim

81

]

3˝.2˝ 3˝

10˝

1.1˝

2.1˝

2.2˝2.2˝

10˝










EntrancE trim – BaltimorE

6767 Trim – .KC


trim thickness: .1875˝ – d

6552.xxx.EntrBaltimore set includes:6767 Exterior Trim6767 Interior Escutcheon – .KT5015 Knobs, pair – .MR0522 4˝ Swivel Spindle



CUT-OUT


5106 Lever5025 Knob

INTE

RIOR

SET

ExT

81

6552.xxx.dBlcBaltimore set includes:6767 Exterior Trim – .KC6767 Interior Escutcheon – .KC5015 Knobs, pair – .MR0522 4˝ Swivel Spindle


6552.xxx.FdBaltimore set includes:6767 (2) Interior Escutcheons – .KN 5015 Knobs, pair – .MR0511 4˝ Straight Spindle

must also order: na

ordering a la carte (Entrance)(with different knob):6767 Exterior Trim6767 Interior Escutcheon – .KT5106 Levers, pair – .MR






EntrancE trim – BaltimorE


FOR THIS TRIM STYLE


83

3˝

14˝

2.3˝

6˝

8˝

3˝ .9˝.1˝

2˝

1.9˝

.1˝









EntrancE trim – cHarlEston



Trim width: 3˝trim thickness: .093˝ – B

6556.xxx.Entr (dwo)charleston set includes:6601 Exterior Trim6769 Interior Escutcheon – .KT5005 Knob – .IMR0530 2.375˝ Half Spindle



CUT-OUTALTERNATIVE KNOBS & LEVERS WE SUGGEST:

5132 Lever5072 Knob

ExT

INTE

RIOR

SET

83

6556.xxx.dBlccharleston set includes:6601 Exterior Trim6769 Interior Escutcheon – .KC5005 Knob – .IMR0530 2.375˝ Half Spindle


6556.xxx.Fdcharleston set includes:6601 Exterior Trim – .DM6769 Interior Escutcheon – .KN5005 Knob – . IMR5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na

ordering a la carte (Entrance)(with different turn knob & lever):6601 Exterior Trim6769 Interior Escutcheon – .KT5072 Knob – . IMR






ordering a la carte (privacy):6769 Exterior Trim – .KE Includes 6701 ER cover6769 Interior Escutcheon – .KT 5005 Knobs, pair – .MR




EntrancE trim – cHarlEston


FOR THIS TRIM STYLE


85









EntrancE trim – ricHmond



6557.xxx.Entrrichmond set includes:6606 Exterior Trim6774 Interior Escutcheon – .KT5005 Knob – .IMR0530 2.375˝ Half Spindle


3˝

20.5˝

.1˝

2˝

12˝

8˝

2.3˝

.9˝.1˝

2˝

1.9˝



5132 Lever5072 Knob

ExT

INTE

RIOR

SET

85

6557.xxx.dBlcrichmond set includes:6606 Exterior Trim6774 Interior Escutcheon – .KC5005 Knob – .IMR0530 2.375˝ Half Spindle


6557.xxx.Fdrichmond set includes:6606 Exterior Trim – .DM6774 Interior Escutcheon – .KN5005 Knob – . IMR5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na

ordering a la carte (Entrance)(with different turn knob & lever):6606 Exterior Trim6774 Interior Escutcheon – .KT5132 Lever – .RMR (.LMR)










EntrancE trim – ricHmond


FOR THIS TRIM STYLE


87

1.7˝

2.25˝

11.5˝

1.7˝3˝

3˝

4.5˝

10.1˝

3˝

.3˝ 2.8˝ .3˝

2.5˝

2.6˝

1.1˝

EntrancE trim – lExington / wilmington




6560.xxx.Entrlexington set includes:6621 Exterior Trim6795 Interior Escutcheon – .KT5025 Knob – .IMR0530 2.375˝ Half Spindle



6560.xxx.ENTR Entrance Trim – lexington Set 4.36560.xxx.DBLC Double Cylinder Set $433 4996560.xxx.FD Full Dummy Set




6546.xxx.ENTR Entrance Trim – wilmington Set 3.46546.xxx.DBLC Double Cylinder Set 342 3946546.xxx.FD Full Dummy Set







5106 Lever5015 Knob

ExT

INTE

RIOR

SET

SET

87

6560.xxx.dBlclexington set includes:6621 Exterior Trim6795 Interior Escutcheon – .KC5025 Knob – .IMR0530 2.375˝ Half Spindle


6560.xxx.Fdlexington set includes:6621 Exterior Trim – .DM6795 Interior Escutcheon – .KN5025 Knob – . IMR5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na



6546.xxx.Entrwilmington set includes:6795 Exterior Trim – .KC6795 Interior Escutcheon – .KT5025 Knobs, pair – .MR0522 4˝ Swivel Spindle


6546.xxx.dBlcwilmington set includes:6795 Exterior Trim – .KC6795 Interior Escutcheon – .KC5025 Knobs, pair – .MR0522 4˝ Swivel Spindle


6546.xxx.Fdwilmington set includes:6795 (2) Interior Escutcheons – .KN 5025 Knobs, pair – .MR0511 4˝ Straight Spindle

must also order: na



EntrancE trim – lExington / wilmington

6621.xxx.BB75 (BB30, BBFd)lexington set includes:(Back-to-Back Entrance)6621 (2) Exterior Trims



89

1.6˝

14˝

2.2˝

5.75˝

1.3˝

2˝

2.8˝

.6˝

1.6˝

8˝


6562.xxx.ENTR Entrance Trim – new york Set 9.56562.xxx.DBLC Double Cylinder Set $433 4996562.xxx.FD Full Dummy Set




6548.xxx.ENTR Entrance Trim – detroit Set 4.56548.xxx.DBLC Double Cylinder Set $342 3946548.xxx.FD Full Dummy Set


Interior Escutcheon – 6503.xxx.KCOS (KCIS) Cut for Cylinder (KC), Double Cylinder Each 85 996503.xxx.KEOS (KEIS) Cut for Emergency Release (KE) Each6503.xxx.KNOS (KNIS) Cut for Knob (KN), Passage/Dummy Each

6503.xxx.KTOS (KTIS) Interior Escutcheon w/ Turn Knob (KT) Each 108 123



EntrancE trim – nEw york / dEtroit



Trim width: 1.625˝trim thickness: .25˝ – E

6562.xxx.Entrnew york set includes:6608 Exterior Trim6503 Interior Escutcheon – .KT5039 Knob – .IMR0530 2.375˝ Half Spindle



5161 Lever




ExT

INTE

RIOR

SET

SET

89

6562.xxx.dBlcnew york set includes:6608 Exterior Trim6503 Interior Escutcheon – .KC5039 Knob – .IMR0530 2.375˝ Half Spindle


6562.xxx.Fdnew york set includes:6608 Exterior Trim – .DM6503 Interior Escutcheon – .KN5039 Knob – . IMR5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na

ordering a la carte (Entrance)(with different turn knob & lever):6608 Exterior Trim6503 Interior Escutcheon – .KEIS (.KE is cut for ER trim or Turn Knob – if standard Turn Knob is desired, order .KT)6735 Turn Knob5161 Lever – .RMR (.LMR)

must also order: Mortise Lock – Lever StrengthCylinder Spindle

6548.xxx.Entrdetroit set includes:6503 Exterior Trim – .KCOS6503 Interior Escutcheon – .KTIS5041 Knobs (.MR – pair)0522 4˝ Swivel Spindle

must also order: Mortise Lock Cylinder

6548.xxx.dBlcdetroit set includes:6503 Exterior Trim – .KCOS6503 Interior Escutcheon – .KCIS5041 Knobs (.MR – pair)0522 4˝ Swivel Spindle

must also order: Mortise Lock Double CylinderBlocking Ring

6548.xxx.Fddetroit set includes:6503 Exterior Trim – .KNOS6503 Interior Escutcheon – .KNIS5041 Knobs (.MR – pair)0511 4˝ Straight Spindle

must also order: na

ordering a la carte (privacy):6503 Exterior Trim – .KEOS Includes 6701 ER cover6503 Interior Escutcheon – .KTIS5041 Knobs, pair – .MR


6608.xxx.BB75 (BB30, BBFd)(Back-to-Back Entrance)new york set includes:6608 (2) Exterior Trims


EntrancE trim – nEw york / dEtroit


91

2.5˝

16˝

2˝

8˝

.1˝ 2.5˝

9.25˝

2.5˝

2˝

.9˝.1˝









EntrancE trim – cHicago




5161 Lever


ALTERNATIVE Turn KnobS WE SUGGEST:



6563.xxx.Entrchicago set includes:6614 Exterior Trim6763 Interior Escutcheon – .KT5039 Knob – .IMR0530 2.375˝ Half Spindle


ExT

INTE

RIOR

SET

91

6563.xxx.dBlcchicago set includes:6614 Exterior Trim6763 Interior Escutcheon – .KC5039 Knob – .IMR0530 2.375˝ Half Spindle


6563.xxx.Fdchicago set includes:6614 Exterior Trim – .DM6763 Interior Escutcheon – .KN5039 Knob – . IMR5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na











EntrancE trim – cHicago


FOR THIS TRIM STYLE


93









EntrancE trim – princEton




6564.xxx.Entrprinceton set includes:6631 Exterior Trim6983 Interior Escutcheon – .KT5072 Knob – .IMR0530 2.375˝ Half Spindle


18.5˝

2˝ .1˝

5.75˝

1.9˝

13.9˝

2.7˝

2˝.9˝.1˝


5132 Lever5020 Knob

ExT

INTE

RIOR

SET

93

6564.xxx.dBlcprinceton set includes:6631 Exterior Trim6983 Interior Escutcheon – .KC5072 Knob – .IMR0530 2.375˝ Half Spindle


6564.xxx.Fdprinceton set includes:6631 Exterior Trim – .DM6983 Interior Escutcheon – .KN5072 Knob – .IMR5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na



ordering a la carte (Entrance):6983 Exterior Trim – .KC6983 Interior Escutcheon – .KT5072 Knob – .IMR


ordering a la carte (double cylinder):6983 Exterior Trim – .KC6983 Interior Escutcheon – .KC5072 Knob – .IMR




ordering a la carte (passage):6983 (2) Interior Escutcheons – .KN 5072 Knob – .IMR


EntrancE trim – princEton


FOR THIS TRIM STYLE


95



6565.xxx.ENFD * 1 Active Entrance Set + 1 Full Dummy Set 2 Sets 866* 998*






EntrancE trim – montErEy




6565.xxx.Entrmonterey set includes:6634 Exterior Trim6642 Interior Escutcheon – .KT5072 Knob – .IMR0530 2.375˝ Half Spindle


1.9˝

23˝

.1˝

1.9˝

16.6˝2.25˝

2.7˝

.9˝.1˝

5.75˝

2.6˝


5132 Lever5020 Knob

ExT

INTE

RIOR

SET

95

6565.xxx.dBlcmonterey set includes:6634 Exterior Trim6642 Interior Escutcheon – .KC5072 Knob – .IMR0530 2.375˝ Half Spindle


6565.xxx.Fdmonterey set includes:6634 Exterior Trim – .DM6642 Interior Escutcheon – .KN5072 Knob – .IMR5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na











EntrancE trim – montErEy


FOR THIS TRIM STYLE


97

EntrancE trim – trEnton / rEading



6567.xxx.Entrtrenton set includes:6602 Exterior Trim6508 Interior Escutcheon – .KT5015 Knob – .IMR0530 2.375˝ Half Spindle



6567.xxx.ENTR Entrance Trim – trenton Set 9.56567.xxx.DBLC Double Cylinder Set $433 4996567.xxx.FD Full Dummy Set



Interior Escutcheon – 6508.xxx.KC Cut for Cylinder (KC), Double Cylinder Each 85 996508.xxx.KN Cut for Knob (KN), Passage/Dummy Each


6551.xxx.ENTR Entrance Trim – reading Set 4.26551.xxx.DBLC Double Cylinder Set 342 3946551.xxx.FD Full Dummy Set






Trim width: 2.25˝trim thickness: .1875˝ – d

3.5˝

15˝

.2˝

8˝

2.5˝ 1˝.2˝

2.1˝

2.2˝6.5˝

2.9˝


CUT-OUTALTERNATIVE KNOBS & LEVERS WE SUGGEST:

5106 Lever5025 Knob

INTE

RIOR

INTE

RIOR

SET

SET

ExT

97

6567.xxx.dBlctrenton set includes:6602 Exterior Trim6508 Interior Escutcheon – .KC5015 Knob – .IMR0530 2.375˝ Half Spindle


6567.xxx.Fdtrenton set includes:6602 Exterior Trim – .DM6508 Interior Escutcheon – .KN5015 Knob – . IMR5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na



6551.xxx.Entrreading set includes:6765 Exterior Trim – .KC6765 Interior Escutcheon – .KT5015 Knobs, pair – .MR0522 4˝ Swivel Spindle


6551.xxx.dBlcreading set includes:6765 Exterior Trim – .KC6765 Interior Escutcheon – .KC5015 Knobs, pair – .MR0522 4˝ Swivel Spindle


6551.xxx.Fdreading set includes:6765 (2) Interior Escutcheons – .KN 5015 Knobs, pair – .MR0511 4˝ Straight Spindle

must also order: na

ordering a la carte (privacy):6765 Exterior Trim – .KE6765 Interior Escutcheon – .KT5015 Knobs, pair – .MR


EntrancE trim – trEnton / rEading



FOR THIS TRIM STYLE

99

030, 031, 038 040, 050, 060 102, 112, 150 003 151, 190 055Item # Description Wt. 260, 264 056








EntrancE trim – rEnssalEar



6568.xxx.Entr (dwo)renssalear set includes:6617 Exterior Trim6511 Interior Escutcheon – .KT5020 Knob – .IMR0530 2.375˝ Half Spindle




CUT-OUT


5132 Lever5072 Knob

ExT

INTE

RIOR

SET

99

6568.xxx.dBlcrenssalear set includes:6617 Exterior Trim6511 Interior Escutcheon – .KC5020 Knob – .IMR0530 2.375˝ Half Spindle


6568.xxx.Fdrenssalear set includes:6617 Exterior Trim – .DM6511 Interior Escutcheon – .KN5020 Knob – .IMR5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na







ordering a la carte (privacy):6511 Exterior Trim – .KE Includes 6701 ER cover6511 Interior Escutcheon – .KT v5020 Knobs, pair – .MR




EntrancE trim – rEnssalEar


FOR THIS TRIM STYLE


101




6619.xxx.BB75 Entrance Back-to-Back – 1.75˝ door Set 661 7456619.xxx.BB30 Entrance Back-to-Back – up to 3˝ door Set







EntrancE trim – atlanta



Trim width: 2.25˝trim thickness: .375˝ – g

6570.xxx.Entratlanta set includes:6619 Exterior Trim6513 Interior Escutcheon – .KT5073 Knob – .IMR0530 2.375˝ Half Spindle


2.25˝

16˝

2.2˝

7˝

10˝

.5˝2.25˝

1.2˝

2.25˝

2.6˝


5161 Lever


5055 Knob

ExT

INTE

RIOR

SET

101

6570.xxx.dBlcatlanta set includes:6619 Exterior Trim6513 Interior Escutcheon – .KC5073 Knob – .IMR0530 2.375˝ Half Spindle


6570.xxx.Fdatlanta set includes:6619 Exterior Trim – .DM6513 Interior Escutcheon – .KN5073 Knob – . IMR5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na











EntrancE trim – atlanta

6619.xxx.BB75 (BB30, BBFd)(Back-to-Back Entrance)atlanta set includes:6619 (2) Exterior Trims



103

EntrancE trim – concord



Trim width: 2.5˝trim thickness: .25˝ – E

6571.xxx.Entrconcord set includes:6604 Exterior Trim6794 Interior Escutcheon – .KT5000 Knob – .IMR0530 2.375˝ Half Spindle


Also available Multi-point – see Multi-point catalog









2.5˝

2.5˝

9.4˝

1.9˝2.8˝

1.9˝

5.5˝

3.7˝

2.5˝

.3˝2.3˝

8˝

.25˝1.1˝

2˝

3.3˝


5106 Lever5025 Knob

ExT

INTE

RIOR

SET

103

6571.xxx.dBlcconcord set includes:6604 Exterior Trim6794 Interior Escutcheon – .KC5000 Knob – .IMR0530 2.375˝ Half Spindle


6571.xxx.Fdconcord set includes:6604 Exterior Trim – .DM6794 Interior Escutcheon – .KN5000 Knob – . IMR5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na



ordering a la carte (Entrance):6794 Exterior Trim – .KC6794 Interior Escutcheon – .KT5000 Knobs, pair – .MR Spindle


ordering a la carte (double cylinder):6794 Exterior Trim – .KC6794 Interior Escutcheon – .KC5000 Knobs, pair – .MR Spindle


EntrancE trim – concord


FOR THIS TRIM STYLE






105









EntrancE trim – plymoutH




6572.xxx.Entrplymouth set includes:6626 Exterior Trim6774 Interior Escutcheon – .KT5005 Knob – .IMR0530 2.375˝ Half Spindle


2.1˝

2.3˝

11.4˝

2.1˝ 2.3˝

6˝

3.6˝

4.9˝ 12˝

3.6˝

.1˝2˝ .9˝

.1˝

1.9˝

2˝


5132 Lever5072 Knob

ExT

INTE

RIOR

SET

105

6572.xxx.dBlcplymouth set includes:6626 Exterior Trim6774 Interior Escutcheon – .KC5005 Knob – .IMR0530 2.375˝ Half Spindle


6572.xxx.Fdplymouth set includes:6626 Exterior Trim – .DM6774 Interior Escutcheon – .KN5005 Knob – .IMR5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na











EntrancE trim – plymoutH


FOR THIS TRIM STYLE


107

EntrancE trim – springFiEld



6573.xxx.Entrspringfield set includes:6628 Exterior Trim6798 Interior Escutcheon – .KT5025 Knob – .IMR0530 2.375˝ Half Spindle






6628.xxx.BB75 Entrance Back-to-Back – 1.75˝ door Set 661 7456628.xxx.BB30 Entrance Back-to-Back – up to 3˝ door Set 6628.xxx.BBFD Dummy Back-to-Back Set








2.8˝

16.5˝

2.25˝ 3˝

3.3˝

4.5˝

10.1˝

.4˝

10.1˝

3˝ 1.1˝

2.5˝

2.6˝


5106 Lever5000 Knob

ExT

INTE

RIOR

SET

107

6573.xxx.dBlcspringfield set includes:6628 Exterior Trim6798 Interior Escutcheon – .KC5025 Knob – .IMR0530 2.375˝ Half Spindle


6573.xxx.Fdspringfield set includes:6628 Exterior Trim – .DM6798 Interior Escutcheon – .KN5025 Knob – . IMR5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na



EntrancE trim – springFiEld

6628.xxx.BB75 (BB30, BBFd)(Back-to-Back Entrance)springfield set includes:6628 (2) Exterior Trims












109

1.9˝

3.7˝ 2.7˝

11.4˝

.3˝1.9˝ 1.3˝

11.4˝

3.7˝ 2.7˝




6922.xxx.RDM (LDM) Dummy Exterior only Each 214 244





EntrancE trim – lakEwood

6980 Trim – .KC



6922.xxx.Entrlakewood set includes:6980 Exterior Trim6980 Interior Escutcheon – .KT5101 Levers, pair – .MR0520 3.5˝ Swivel Spindle


ALTERNATIVE LEVERS WE SUGGEST:

5117 Lever


ExT

INTE

RIOR

SET

109

6922.xxx.dBlclakewood set includes:6980 Exterior Trim – .KC6980 Interior Escutcheon – .KC5101 Levers, pair – .MR0520 3.5˝ Swivel Spindle

must also order:Mortise Lock – Lever StrengthDouble CylinderBlocking Ring

6922.xxx.Fdlakewood set includes:6980 Exterior Trim – .KN6980 Interior Escutcheon – .KN5101 Levers, pair – .MR0510 3.5˝ Straight Spindle

must also order: na



ordering a la carte (privacy):6980 Exterior Trim – .KE Includes 6701 ER cover6980 Interior Escutcheon – .KT 5101 Levers, pair – .MR




EntrancE trim – lakEwood


111

1.9˝

8˝

3.4˝

.2˝

1.9˝

8.1˝

1.9˝

3.4˝

.9˝

1.9˝









EntrancE trim – vancouvEr

6979 Trim – .KC


trim thickness: .093˝ – B

6924.xxx.Entrvancouver set includes:6979 Exterior Trim – .KC6979 Interior Escutcheon – .KT5103 Levers, pair – .MR0520 3.5˝ Swivel Spindle




5064 Knob 5065 Knob

ExT

INTE

RIOR

SET

111

6924.xxx.dBlcvancouver set includes:6979 Exterior Trim – .KC6979 Interior Escutcheon – .KC5103 Levers, pair – .MR0520 3.5˝ Swivel Spindle


6924.xxx.Fdvancouver set includes:6979 Exterior Trim – .KN6979 Interior Escutcheon – .KN5103 Levers, pair – .MR0510 3.5˝ Straight Spindle

must also order: na

ordering a la carte (Entrance)(with different knob):6979 Exterior Trim – .KC6979 Interior Escutcheon – .KT5065 Knobs, pair – .MR






EntrancE trim – vancouvEr


113




6927.xxx.RDM (LDM) Dummy Exterior Trim Each 172 197





EntrancE trim – montpEliEr

6983 Trim – .KC


6927.xxx.Entrmontpelier set includes:6983 Exterior Trim6983 Interior Escutcheon – .KT5132 Levers, pair – .MR0520 3.5˝ Swivel Spindle



5072 Knob5020 Knob

2˝

3.3˝

2˝ .9˝.1˝

13.8˝ 13.9˝

2.8˝ 2.8˝

trim thickness: .093˝ – B

ExT

INTE

RIOR

SET

113

EntrancE trim – montpEliEr

6927.xxx.dBlcmontpelier set includes:6983 Exterior Trim – .KC6983 Interior Escutcheon – .KC5132 Levers, pair – .MR0520 3.5˝ Swivel Spindle


6927.xxx.Fdmontpelier set includes:6983 (2) Interior Escutcheons – .KN 5132 Levers, pair – .MR0510 3.5˝ Straight Spindle

must also order: na








115

1.6˝

14˝

.2˝1.6˝ .9˝

10˝

5.75˝

1.9˝

3.6˝ 1.8˝


6931.xxx.RENT (LENT) Entrance Trim – dallas, w/ angled pull Set 9.56931.xxx.RDBL (LDBL) Double Cylinder – w/ angled pull Set $433 4996931.xxx.RFD (LFD) Full Dummy – w/ angled pull Set


6953.xxx.R (.L) Active Exterior Trim only – w/ angled pull Each 331 3736953.xxx.RDM (LDM) Dummy Exterior only – w/ angled pull Each

6940.xxx.ENTR Entrance Trim – denver Set 6940.xxx.DBLC Double Cylinder Set $342 3946940.xxx.FD Full Dummy Set






EntrancE trim – dallas / dEnvEr

6953 TrimIncludes: 2679 Angled REVERSIBLE Pull



6931.xxx.rEnt (lEnt)dallas set includes:6953 Exterior Trim6988 Interior Escutcheon – .KT5105 Lever – .RMR (LMR)0530 2.375˝ Half Spindle


2679 pull is anglEd ~ 15˚ for use with narrow backset (1.5˝ & 2˝ ) mortise locks, may also be used with 2.5˝ & 2.75˝ mortise locks


5161 Lever


5055 Knob

ExT

ExT

INTE

RIOR

SET

SET

115

6931.xxx.rdBl (ldBl)dallas set includes:6953 Exterior Trim6988 Interior Escutcheon – .KC5105 Lever – .RMR (LMR)0530 2.375˝ Half Spindle


6931.xxx.rFd (lFd)dallas set includes:6953 Exterior Trim – .DM6988 Interior Escutcheon – .KN5105 Lever – .RMR (LMR)5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na

ordering a la carte (Entrance)(with different turn knob & lever):6953 Exterior Trim6988 Interior Escutcheon – .KEIS (.KE is cut for ER trim or Turn Knob – if standard Turn Knob is desired, order .KT)6735 Turn Knob5055 Knob – .MR

must also order: Mortise Lock Cylinder Spindle

6940.xxx.Entrdenver set includes:6988 Exterior Trim – .KC6988 Interior Escutcheon – .KT5105 Levers, pair – .MR0520 3.5˝ Swivel Spindle

must also order: Mortise Lock – Lever StrengthCylinder

6940.xxx.dBlcdenver set includes:6988 Exterior Trim – .KC6988 Interior Escutcheon – .KC5105 Levers, pair – .MR0520 3.5˝ Swivel Spindle


6940.xxx.Fddenver set includes:6988 (2) Interior Escutcheons – .KN 5105 Levers, pair – .MR0510 3.5˝ Straight Spindle

must also order: na



EntrancE trim – dallas / dEnvEr


FOR THIS TRIM STYLE


117

5000 Knob

1.7˝

11.5˝

2.25˝

6.5˝

1.7˝3˝

3˝

4.5˝

10˝

3˝

.3˝ 2˝ .3˝

2.7˝

1.2˝

EntrancE trim – cHarlottE

6955 TrimIncludes: 2694 Angled Pull



6937.xxx.rEnt (lEnt)charlotte set includes:6955 Exterior Trim6990 Interior Escutcheon – .KT5106 Lever – .RMR (LMR)0530 2.375˝ Half Spindle



6937 .xxx.RENT (LENT) Entrance Trim – w/ angled pull Set 3.66937.xxx.RDBL (LDBL) Double Cylinder – w/ angled pull Set $433 4996937.xxx.RFD (LFD) Full Dummy – w/ angled pull Set


6955.xxx.R (.L) Active Exterior Trim only – w/ angled pull Each 331 3736955.xxx.RDM (LDM) Dummy Exterior only – w/ angled pull Each





2694 pull is anglEd ~ 15˚ for use with narrow backset (1.5˝ & 2˝ ) mortise locks, may also be used with 2.5˝ & 2.75˝ mortise locks


5025 Knob

ExT

INTE

RIOR

SET

117

6937.xxx.rdBl (ldBl)charlotte set includes:6955 Exterior Trim6990 Interior Escutcheon – .KC5106 Lever – .RMR (LMR)05334 2.25˝ 0530 2.375˝ Half Spindle


6937.xxx.rFd (lFd)charlotte set includes:6955 Exterior Trim – .DM6990 Interior Escutcheon – .KN5106 Lever – .RMR (LMR)05334 2.25˝ 5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na

ordering a la carte (Entrance)(with different lever):6955 Exterior Trim6990 Interior Escutcheon – .KT5106 Lever – .RMR (LMR)


ordering a la carte (Entrance):6990 Exterior Trim – .KC6990 Interior Escutcheon – .KT5106 Levers, pair – .MR Spindle


ordering a la carte (double cylinder):6990 Exterior Trim – .KC6990 Interior Escutcheon – .KC5106 Levers, pair – .MR Spindle


EntrancE trim – cHarlottE


FOR THIS TRIM STYLE



ordering a la carte (passage):6990 (2) Interior Escutcheons – .KN 5106 Knob – .RMR (LMR)



119

2˝

11.5˝

4.4˝ 4.4˝

11.5˝

2.2˝.3˝ 2.1˝ .3˝

1.3˝

2.2˝









EntrancE trim – moBilE

6996 Trim – .KC



6938.xxx.Entrmobile set includes:6996 Exterior Trim6996 Interior Escutcheon – .KT5117 Levers, pair – .MR0520 3.5˝ Swivel Spindle



5101 Lever


ExT

INTE

RIOR

SET

119

6938.xxx.dBlcmobile set includes:6996 Exterior Trim – .KC6996 Interior Escutcheon – .KC5117 Levers, pair – .MR0520 3.5˝ Swivel Spindle


6938.xxx.Fdmobile set includes:6996(2) Interior Escutcheons – .KN 5117 Levers, pair – .MR0510 3.5˝ Straight Spindle

must also order: na







EntrancE trim – moBilE


121

1.8˝

3.9˝ 2.3˝

8.3˝

.2˝ 1.8˝

3.9˝

8.3˝

1.3˝

2.3˝









EntrancE trim – Bismark

6986 Trim – .KC



6942.xxx.EntrBismark set includes:6986 Exterior Trim6986 Interior Escutcheon – .KT5152 Levers, pair – .MR0522 4˝ Swivel Spindle




5064 Knob 5065 Knob

ExT

INTE

RIOR

SET

121

6942.xxx.dBlcBismark set includes:6986 Exterior Trim – .KC6986 Interior Escutcheon – .KC5152 Levers, pair – .MR0522 4˝ Swivel Spindle


6942.xxx.FdBismark set includes:6986 (2) Interior Escutcheons – .KN 5152 Levers, pair – .MR0511 4˝ Straight Spindle

must also order: na



ordering a la carte (privacy):6986 Exterior Trim – .KE Includes 6701 ER cover6986 Interior Escutcheon – .KT or .KP5152 Levers, pair – .MR




EntrancE trim – Bismark


123

3.4˝

19˝

2.7˝

8˝

13.1˝

.5˝

3.3˝ 1.4˝

3˝




6641.xxx.BB75 Entrance Back-to-Back – 1.75˝ door Set 1067 12216641.xxx.BBFD Dummy Back-to-Back Set






EntrancE trim – pasadEna




6944.xxx.Entrpasadena set includes:6641 Exterior Trim6714 Interior Escutcheon – .KT5063 Knob – .IMR0530 2.375˝ Half Spindle



CUT-OUT


5190 Lever5023 Knob

ExT

INTE

RIOR

SET

123

6944.xxx.dBlcpasadena set includes:6641 Exterior Trim6714 Interior Escutcheon – .KC5063 Knob – .IMR0530 2.375˝ Half Spindle


6944.xxx.Fdpasadena set includes:6641 Exterior Trim – .DM6714 Interior Escutcheon – .KN5063 Knob – . IMR5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na






must also order: Mortise LockCylinderBlocking RingSpindle





EntrancE trim – pasadEna

6641.xxx.BB75 (BBFd)(Back-to-Back Entrance)pasadena set includes:6641 (2) Exterior Trims



125

EntrancE trim – victoria / vErsaillEs




6948.xxx.RENT (LENT) Entrance Trim – victoria Set 9.56948.xxx.RDBL (LDBL) Double Cylinder Set $712 8136948.xxx.RFD (LFD) Full Dummy Set



6956.xxx.BB75 Entrance Back-to-Back – 1.75˝ door Each 1067 12216956.xxx.BBFD Dummy Back-to-Back Each

6933.xxx.ENTR Entrance Trim – versailles Set 6933.xxx.DBLC Double Cylinder Set 427 4886933.xxx.FD Full Dummy Set




6993.xxx.KT Interior Escutcheon w/ Turn Knob (KT) Each 208 238 NOTE: 030 is not available with Entry Trim or KC escutcheons *.ENFD only available in 038, 050, 112 & 190, to ensure a finish match on all components.

2.4˝.3˝

2˝.3˝

1.3˝

22.6˝

6.5˝

11˝

3.75˝ 2.3˝

2.8˝

Trim width: 2.4˝trim thickness: .188˝ – d

6948.xxx.rEnt (lEnt)victoria set includes:6956 Exterior Trim6993 Interior Escutcheon – .KT5121 Lever – .RMR (LMR)0531 2.875˝ Half Spindle

must also order:Mortise Lock– Lever StrengthCylinder – 8322 for 1.75˝ door


5101 Lever


ExT

ExT

INTE

RIOR

SET

SET

125

6948.xxx.rdBl (ldBl)victoria set includes:6956 Exterior Trim6993 Interior Escutcheon – .KC5121 Lever – .RMR (LMR)0531 2.875˝ Half Spindle


6948.xxx.rFd (lFd)victoria set includes:6956 Exterior Trim – .DM6993 Interior Escutcheon – .KN5121 Lever – .RMR (LMR)5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na

ordering a la carte (Entrance)(with different turn knob & lever):6956 Exterior Trim6993 Interior Escutcheon – .KT5101 Lever – .RMR (LMR)

must also order: Mortise Lock– Lever StrengthCylinderSpindle

6956.xxx.BB75 (BBFd)(Back-to-Back Entrance)victoria set includes:6956 (2) Exterior Trims


6933.xxx.Entrversailles set includes:6993 Exterior Trim – .KC6993 Interior Escutcheon – .KT5121 Levers, pair – .MR0520 3.5˝ Swivel Spindle

must also order: Mortise Lock– Lever StrengthCylinder

6933.xxx.dBlcversailles set includes:6993 Exterior Trim – .KC6993 Interior Escutcheon – .KC5121 Levers, pair – .MR0520 3.5˝ Swivel Spindle


6933.xxx.Fdversailles set includes:6993 (2) Interior Escutcheons – .KN 5121 Levers, pair – .MR0510 3.5˝ Straight Spindle

must also order: na



EntrancE trim – victoria / vErsaillEs


127

1.6˝ .5˝ 1.6˝.5˝

.8˝

2.2˝4˝

8˝8˝

7˝

15.3˝

2.3˝

1.75˝


6949.xxx.RENT (LENT) Entrance Trim – metropolitan Set 9.56949.xxx.RDBL (LDBL) Double Cylinder Set $433 4996949.xxx.RFD (LFD) Full Dummy Set



6910.xxx.ENTR Entrance Trim – midtown Set 6910.xxx.DBLC Double Cylinder Set $342 3946910.xxx.FD Full Dummy Set







EntrancE trim – mEtropolitan / midtown



Trim width: 1.625˝trim thickness: .25˝ – c

6949.xxx.rEnt (lEnt)metropolitan set includes:6960 Exterior Trim6503 Interior Escutcheon – .KT5130 Lever – .RMR (LMR)0530 2.375˝ Half Spindle



5161 Lever




ExT

ExT

INTE

RIOR

SET

SET

127

6949.xxx.rdBl (ldBl)metropolitan set includes:6960 Exterior Trim6503 Interior Escutcheon – .KC5130 Lever – .RMR (LMR)0530 2.375˝ Half Spindle


6949.xxx.rFd (lFd)metropolitan set includes:6960 Exterior Trim – .DM6503 Interior Escutcheon – .KN5130 Lever – .RMR (LMR)5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na

ordering a la carte (Entrance)(with different turn knob & lever):6960 Exterior Trim6503 Interior Escutcheon – .KTIS5055 Knob – .MR

must also order: Mortise Lock Cylinder Spindle

6910.xxx.Entrmidtown set includes:6503 Exterior Trim – .KCOS6503 Interior Escutcheon – .KTIS5130 Levers, pair – .MR0522 4˝ Swivel Spindle


6910.xxx.dBlcmidtown set includes:6503 Exterior Trim – .KCOS6503 Interior Escutcheon – .KCIS5130 Levers, pair – .MR0522 4˝ Swivel Spindle


6910.xxx.Fdmidtown set includes:6503 Exterior Trim – .KNOS6503 Interior Escutcheon – .KNIS5130 Levers, pair – .MR0511 4˝ Straight Spindle

must also order: na

ordering a la carte (privacy):6503 Exterior Trim – .KEOS Includes 6701 ER cover6503 Interior Escutcheon – .KTIS5130 Levers, pair – .MR


EntrancE trim – mEtropolitan / midtown


FOR THIS TRIM STYLE


129

EntrancE trim – kEnsington / wEstminstEr




6950.xxx.RENT (LENT) Entrance Trim – kensington Set 9.56950.xxx.RDBL (LDBL) Double Cylinder Set $712 8136950.xxx.RFD (LFD) Full Dummy Set


6624.xxx.BB75 Entrance Back-to-Back – 1.75˝ door Set 1067 12216624.xxx.BB30 Entrance Back-to-Back – up to 3˝ door Set6624.xxx.BBFD Dummy Back-to-Back Set


6961.xxx.ENTR Entrance Trim – westminster Set 6961.xxx.DBLC Double Cylinder Set 427 4886961.xxx.FD Full Dummy Set








2.75˝

19˝

6.5˝

2.9˝

.3˝

2.75˝

11.2˝

3.9˝ 2.4˝

.3˝1.5˝


6950.xxx.rEnt (lEnt)kensington set includes:6624 Exterior Trim6790 Interior Escutcheon – .KT5108 Lever – .RMR (LMR)0530 2.375˝ Half Spindle



CUT-OUTALTERNATIVE LEVERS WE SUGGEST:

5101 Lever 5121 Lever5117 Lever

ExT

ExT

INTE

RIOR

SET

SET

3”

129

6950.xxx.rdBl (ldBl)kensington set includes:6624 Exterior Trim6790 Interior Escutcheon – .KC5108 Lever – .RMR (LMR)0530 2.375˝ Half Spindle


6950.xxx.rFd (lFd)kensington set includes:6624 Exterior Trim – .DM6790 Interior Escutcheon – .KN5108 Lever – .RMR (LMR)5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na

ordering a la carte (Entrance)6624 Exterior Trim6790 Interior Escutcheon – .KT5101 Lever – .RMR (LMR)


6961.xxx.Entrwestminster set includes:6790 Exterior Trim – .KC6790 Interior Escutcheon – .KT5108 Levers, pair – .MR0522 4˝ Swivel Spindle

must also order: Mortise Lock– Lever StrengthCylinder Spindle

6961.xxx.dBlcwestminster set includes:6790 Exterior Trim – .KC6790 Interior Escutcheon – .KC5108 Levers, pair – .MR0522 4˝ Swivel Spindle

must also order: Mortise Lock– Lever StrengthDouble CylinderBlocking RingSpindle

6961.xxx.Fdwestminster set includes:6790 (2) Interior Escutcheons – .KN 5108 Levers, pair – .MR0511 4˝ Straight Spindle

must also order: na



EntrancE trim – kEnsington / wEstminstEr


6624.xxx.BB75 (BB30, BBFd)(Back-to-Back Entrance)kensington set includes:6624 (2) Exterior Trims



131

EntrancE trim – EdinBurgH / FEnwick




6952.xxx.RENT (LENT) Entrance Trim – Edinburgh Set 9.56952.xxx.RDBL (LDBL) Double Cylinder Set $712 8136952.xxx.RFD (LFD) Full Dummy Set


6652.xxx.BB75 Entrance Back-to-Back – 1.75˝ door Set 1067 12216652.xxx.BB30 Entrance Back-to-Back – up to 3˝ door Set6652.xxx.BBFD Dummy Back-to-Back Set


6962.xxx.ENTR Entrance Trim – Fenwick Set6962.xxx.DBLC Double Cylinder Set 427 4886962.xxx.FD Full Dummy Set








3.1˝ .6˝ 3.1˝1.6˝

20.8˝

8˝

13.9˝

4.6˝ 2.7˝

2.8˝

Trim width: 3.0˝trim thickness: .435˝ – H

6952.xxx.rEnt (lEnt)Edinburgh set includes:6652 Exterior Trim6789 Interior Escutcheon – .KT5122 Lever – .RMR (LMR)0530 2.375˝ Half Spindle



CUT-OUT



ExT

ExT

INTE

RIOR

SET

SET

131

6952.xxx.rdBl (ldBl)Edinburgh set includes:6652 Exterior Trim6789 Interior Escutcheon – .KC5122 Lever – .RMR (LMR)0530 2.375˝ Half Spindle


6952.xxx.rFd (lFd)Edinburgh set includes:6652 Exterior Trim – .DM6789 Interior Escutcheon – .KN5122 Lever – .RMR (LMR)5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na



6962.xxx.EntrFenwick set includes:6789 Exterior Trim – .KC6789 Interior Escutcheon – .KT5122 Levers, pair – .MR0522 4˝ Swivel Spindle


6962.xxx.dBlcFenwick set includes:6789 Exterior Trim – .KC6789 Interior Escutcheon – .KC5122 Levers, pair – .MR0522 4˝ Swivel Spindle


6962.xxx.FdFenwick set includes:6789 (2) Interior Escutcheons – .KN 5122 Levers, pair – .MR0511 4˝ Straight Spindle

must also order: na



EntrancE trim – EdinBurgH / FEnwick


6652.xxx.BB75 (BB30, BBFd)(Back-to-Back Entrance)Edinburgh set includes:6652 (2) Exterior Trims



133

EntrancE trim – Bristol / Barclay




6963.xxx.RENT (LENT) Entrance Trim – Bristol Set 9.56963.xxx.RDBL (LDBL) Double Cylinder Set $712 8136963.xxx.RFD (LFD) Full Dummy Set




6939.xxx.ENTR Entrance Trim – Bristol lever set Set6939.xxx.DBLC Double Cylinder Set 427 4886939.xxx.FD Full Dummy Set



6554.xxx.ENTR Entrance Trim – Barclay (knob) set Set6554.xxx.DBLC Double Cylinder Set 427 4886554.xxx.FD Full Dummy Set








3.4˝ .5˝

11˝

6˝

15.9˝

2.6˝

3.7˝2.4˝

2.75˝ 1.4˝

trim thickness: .375˝ – g

6963.xxx.rEnt (lEnt)Bristol set includes:6627 Exterior Trim6991 Interior Escutcheon – .KT5104 Lever – .RMR (LMR)0530 2.375˝ Half Spindle



CUT-OUT



5066 Knob 5068 Knob

ExT

ExT

INTE

RIOR

SET

SET

133


6939.xxx.EntrBristol lever set includes:6991 Exterior Trim – .KC6991 Interior Escutcheon – .KT5104 Levers, pair – .MR0522 4˝ Swivel Spindle

6939.xxx.dBlcBristol lever set includes:6991 Exterior Trim – .KC6991 Interior Escutcheon – .KC5104 Levers, pair – .MR0522 4˝ Swivel Spindle

6939.xxx.FdBristol lever set includes:6991 (2) Interior Escutcheons – .KN 5104 Levers, pair – .MR0511 4˝ Straight Spindle



6963.xxx.rdBl (ldBl)Bristol set includes:6627 Exterior Trim6991 Interior Escutcheon – .KC5104 Lever – .RMR (LMR)0530 2.375˝ Half Spindle

6963.xxx.rFd (lFd)Bristol set includes:6627 Exterior Trim – .DM6991 Interior Escutcheon – .KN5104 Lever – .RMR (LMR)5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

ordering a la carte (Entrance)6627 Exterior Trim6991 Interior Escutcheon – .KT5064 Knob – .IMR

6627.xxx.BB75 (BB30, BBFd)(Back-to-Back Entrance)Bristol set includes:6627 (2) Exterior Trims

6554.xxx.EntrBarclay (knob) set includes:6991 Exterior Trim – .KC6991 Interior Escutcheon – .KT5064 Knobs (.MR – pair)0522 4˝ Swivel Spindle

6554.xxx.dBlcBarclay (knob) set includes:6991 Exterior Trim – .KC6991 Interior Escutcheon – .KC5064 Knobs (.MR – pair)0522 4˝ Swivel Spindle

6554.xxx.FdBarclay (knob) set includes:6991 (2) Interior Escutcheons – .KN 5064 Knobs (.MR – pair)0511 4˝ Straight Spindle

ordering a la carte (passage):6991 (2) Interior Escutcheons – .KN 5064 Knobs (.MR – pair)


135

2.55(64.8mm)

6.50(165.1mm)

17.34(440.4mm)

1.81(46mm)

0.51(13mm)

1.07(27.2mm)0.40

(10.2mm)

10.00(254mm)

4.46(113.3mm)

2.65(67.3mm)

1.00(25.4mm)

1.00(25.4mm)

2.55(64.8mm)

6.50(165.1mm)

17.34(440.4mm)

1.81(46mm)

0.51(13mm)

1.07(27.2mm)0.40

(10.2mm)

10.00(254mm)

4.46(113.3mm)

2.65(67.3mm)

1.00(25.4mm)

1.00(25.4mm)

EntrancE trim – lakEsHorE




6966.xxx.RENT (LENT) Entrance Trim – lakeshore Set 5.06966.xxx.RDBL (LDBL) Double Cylinder Set $712 8136966.xxx.RFD (LFD) Full Dummy Set




6974.xxx.ENTR Entrance Trim – lakeshore lever set Set 3.56974.xxx.DBLC Double Cylinder Set 427 4886974.xxx.FD Full Dummy Set







trim thickness: .375˝ – g

6966.xxx.rEnt (lEnt)lakeshore set includes:6553 Exterior Trim6502 Interior Escutcheon – .KT5162 Lever – .RMR (LMR)0530 2.375˝ Half Spindle




5161 Lever5055 Knob


ExT

ExT

INTE

RIOR

SET

SET

135

6966.xxx.rdBl (ldBl)lakeshore set includes:6553 Exterior Trim6502 Interior Escutcheon – .KC5162 Lever – .RMR (LMR)0530 2.375˝ Half Spindle


6966.xxx.rFd (lFd) lakeshore set includes:6553 Exterior Trim – .DM6502 Interior Escutcheon – .KN5162 Lever – .RMR (LMR)5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na



6974.xxx.Entrlakeshore lever set includes:6502 Exterior Trim – .KCOS6502 Interior Escutcheon – .KTIS5162 Levers, pair – .MR0522 4˝ Swivel Spindle


6974.xxx.dBlclakeshore lever set includes:6502 Exterior Trim – .KCOS6502 Interior Escutcheon – .KCIS5162 Levers, pair – .MR0522 4˝ Swivel Spindle


6974.xxx.Fdlakeshore lever set includes:6502 Exterior Trim – .KNOS6502 Interior Escutcheon – .KNIS5162 Levers, pair – .MR0511 4˝ Straight Spindle

must also order: na

ordering a la carte (privacy):6502 Exterior Trim – .KEOS Includes 6701 ER cover6502 Interior Escutcheon – .KTIS5162 Levers, pair – .MR


EntrancE trim – lakEsHorE


6553.xxx.BB75 (BB30, BBFd)(Back-to-Back Entrance)lakeshore set includes:6553 (2) Exterior Trims


137










EntrancE trim – Houston

6506 Trim – .KC 6506 Interior Escutcheon.KT Includes: 6735 Turn Knob

trim thickness: .435˝ – H

6973.xxx.EntrHouston set includes:6506 Exterior Trim6506 Interior Escutcheon – .KT5164 Levers, pair – .MR0522 4˝ Swivel Spindle



5161 Lever

5165 Lever

5055 Knob

5162 Lever

5.58(141.8mm)

2.25(57.2mm)

9.65(245.2mm)

3.44(87.3mm)

1.14(29.0mm)

2.25(57.2mm)

2.69(68.4mm)

ExT

INTE

RIOR

SET

137

6973.xxx.dBlcHouston set includes:6506 Exterior Trim – .KCOS6506 Interior Escutcheon – .KCIS5164 Levers, pair – .MR0522 4˝ Swivel Spindle


6973.xxx.FdHouston set includes:6506 Exterior Trim – .KNOS6506 Interior Escutcheon – .KNIS5164 Levers, pair – .MR0511 4˝ Straight Spindle

must also order: na

ordering a la carte (Entrance)6506 Exterior Trim – .KCOS6506 Interior Escutcheon – .KTIS5055 Knobs, pair – .MR


ordering a la carte (privacy):6506 Exterior Trim – .KEOS Includes 6701 ER cover6506 Interior Escutcheon – .KTIS 5164 Levers, pair – .MR


ordering a la carte (passage):6506 Exterior Trim – .KNOS6506 Interior Escutcheon – .KNIS5164 Levers, pair – .MR


EntrancE trim – Houston


139


6976.xxx.RENT (LENT) Entrance Trim Set 5.56976.xxx.RDBL (LDBL) Double Cylinder Set $433 4996976.xxx.RFD (LFD) Full Dummy Set








EntrancE trim – minnEapolis




5161 Lever


5055 Knob


6976.xxx.rEnt (lEnt)minneapolis set includes:6620 Exterior Trim6514 Interior Escutcheon – .KT5190 Lever – .RMR (LMR)0530 2.375˝ Half Spindle



CUT-OUT

ExT

INTE

RIOR

SET

139

6976.xxx.rdBl (ldBl)minneapolis set includes:6620 Exterior Trim6514 Interior Escutcheon – .KC5190 Lever – .RMR (LMR)0530 2.375˝ Half Spindle


6976.xxx.rFd (lFd)minneapolis set includes:6620 Exterior Trim – .DM6513 Interior Escutcheon – .KN5190 Lever – .RMR (LMR)5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na

ordering a la carte (Entrance)6620 Exterior Trim6514 Interior Escutcheon – .KT5055 Knob – .MR





must also order: Mortise Lock – Lever StrengthDouble CylinderBlocking RingSpindle





EntrancE trim – minnEapolis

6620.xxx.BB75 (BB30, BBFd)(Back-to-Back Entrance)minneapolis set includes:6620 (2) Exterior Trims



141

2.9˝ .6˝2.9˝ 1.5˝

11˝

16.3˝

5.75˝

2.2˝

3.9˝ 2.6˝


6999.xxx.RENT (LENT) Entrance Trim Set 9.56999.xxx.RDBL (LDBL) Double Cylinder Set $712 8136999.xxx.RFD (LFD) Full Dummy Set


6690.xxx.BB75 Entrance Back-to-Back – 1.75˝ door Set 1067 12216690.xxx.BBFD Entrance Back-to-Back Set






EntrancE trim – ricHland



Trim width: 2.9˝trim thickness: .435˝ – H

6999.xxx.rEnt (lEnt)richland set includes:6690 Exterior Trim6709 Interior Escutcheon – .KT5190 Lever – .RMR (LMR)0530 2.375˝ Half Spindle



CUT-OUT


5063 Knob5023 Knob

ExT

INTE

RIOR

SET

141

6999.xxx.rdBl (ldBl)richland set includes:6690 Exterior Trim6709 Interior Escutcheon – .KC5190 Lever – .RMR (LMR)0530 2.375˝ Half Spindle


6999.xxx.rFd (lFd)richland set includes:6690 Exterior Trim – .DM6709 Interior Escutcheon – .KN5190 Lever – .RMR (LMR)5092 1.125˝ Dummy Spindle6761 Dummy Cylinder

must also order: na

ordering a la carte (Entrance)6690 Exterior Trim6709 Interior Escutcheon – .KT5063 Knob – .MR





must also order: Mortise Lock – Lever StrengthCylinderBlocking RingSpindle





EntrancE trim – ricHland

6690.xxx.BB75 (BBFd)(Back-to-Back Entrance)richland set includes:6690 (2) Exterior Trims



143

imagEs – HandlEsEts, mortisE

2.98

.53.53

9.259.25

8.0 3.0

3.0

2.5

2.5

17.25

031. 050, 102 003, 055, 056 112, 150, 151 402, 412tem # Function 190, 260, 264 432, 452

M502.xxx.ENTR Cody 3/4 Escutcheon w/ Knob – Entry

M502.xxx.FD Cody 3/4 Escutcheon w/ Knob – Dummy

M502.xxx.LENT Cody 3/4 Escutcheon w/ Lever – LH Entry $518 535M502.xxx.RENT Cody 3/4 Escutcheon w/ Lever – RH Entry

M502.xxx.RFD Cody 3/4 Escutcheon w/ Lever – RH Dummy

M502.xxx.LFD Cody 3/4 Escutcheon w/ Lever – LH Dummy

Cody Full Escutcheon Trimw/ 5432 knob or 5452 lever

031. 050, 102 003, 055, 056 112, 150, 151 402, 412tem # Function 190, 260, 264 432, 452

M504.xxx.ENTR Cody Full Escutcheon w/ Knob – Entry

M504.xxx.FD Cody Full Escutcheon w/ Knob – Dummy

M504.xxx.LENT Cody Full Escutcheon w/ Lever – LH Entry $546 578M504.xxx.RENT Cody Full Escutcheon w/ Lever – RH Entry

M504.xxx.RFD Cody Full Escutcheon w/ Lever – RH Dummy

M504.xxx.LFD Cody Full Escutcheon w/ Lever – LH Dummy

3.42

.53

8.0

17.88

2.98

.53

9.25

3.0

3.0

.ENTR

.ENTR

Lock must be purchased separately.


Cody 3/4 Escutcheon Trimw/ 5432 knob or 5452 lever

Boulder 3/4 Escutcheon Trimw/ 5432 knob or 5452 lever

031. 050, 102 003, 055, 056 112, 150, 151 402, 412tem # Function 190, 260, 264 432, 452

M512.xxx.ENTR Boulder 3/4 Escutcheon w/ Knob – Entry

M512.xxx.FD Boulder 3/4 Escutcheon w/ Knob – Dummy

M512.xxx.LENT Boulder 3/4 Escutcheon w/ Lever – LH Entry $518 535M512.xxx.RENT Boulder 3/4 Escutcheon w/ Lever – RH Entry

M512.xxx.RFD Boulder 3/4 Escutcheon w/ Lever – RH Dummy

M512.xxx.LFD Boulder 3/4 Escutcheon w/ Lever – LH Dummy

3.0

3.04.11

2.63

.53

11.21

2.39

18.54

11.21

8.0

3.25

3.42

.ENTRLock must be purchased separately.

Boulder Full Escutcheon Trimw/ 5432 knob or 5452 lever

031. 050, 102 003, 055, 056 112, 150, 151 402, 412tem # Function 190, 260, 264 432, 452

M514.xxx.ENTR Boulder Full Escutcheon w/ Knob – Entry

M514.xxx.FD Boulder Full Escutcheon w/ Knob – Dummy

M514.xxx.LENT Boulder Full Escutcheon w/ Lever – LH Entry $546 578M514.xxx.RENT Boulder Full Escutcheon w/ Lever – RH Entry

M514.xxx.RFD Boulder Full Escutcheon w/ Lever – RH Dummy

M514.xxx.LFD Boulder Full Escutcheon w/ Lever – LH Dummy

.53

8.0

3.42

18.03

3.0

3.0

4.112.63

.53

11.21

.ENTR


.LENT or .RENT

.LENT or .RENT

.LENT or .RENT

.LENT or .RENT

143

imagEs – HandlEsEts, mortisE 031, 050, 102 003, 055, 056 112, 150, 151 402, 412Item # Function 190, 260, 264 432, 452

M522.xxx.ENTR Bethpage 3/4 Escutcheon w/ Knob – Entry

M522.xxx.FD Bethpage 3/4 Escutcheon w/ Knob – Dummy

M522.xxx.LENT Bethpage 3/4 Escutcheon w/ Lever – LH Entry $518 535M522.xxx.RENT Bethpage 3/4 Escutcheon w/ Lever – RH Entry

M522.xxx.RFD Bethpage 3/4 Escutcheon w/ Lever – RH Dummy

M522.xxx.LFD Bethpage 3/4 Escutcheon w/ Lever – LH Dummy

M522.xxx.BB75 Bethpage 3/4 Escutcheon Back-to-Back – 1.75˝ door

M522.xxx.BB30 Bethpage 3/4 Escutcheon Back-to-Back – up to 3˝ door 777 802

M522.xxx.BBFD Bethpage 3/4 Escutcheon Back-to-Back – Dummy

031, 050, 102 003, 055, 056 112, 150, 151 402, 412Item # Function 190, 260, 264 432, 452

M516.xxx.LENT Soho Single Point Escutcheon w/ Lever – LH Entry

M516.xxx.RENT Soho Single Point Escutcheon w/ Lever – RH Entry $518 535

M516.xxx.RFD Soho Single Point Escutcheon w/ Lever – RH Dummy

M516.xxx.LFD Soho Single Point Escutcheon w/ Lever – LH Dummy

M516.xxx.BB75 Soho Single Point Escutcheon Back-to-Back – 1.75˝ door

M516.xxx.BB30 Soho Single Point Escutcheon Back-to-Back – up to 3˝ door 777 802

M516.xxx.BBFD Soho Single Point Escutcheon Back-to-Back – Dummy

.LENT or .RENT



Bethpage 3/4 Escutcheon Trimw/ 5437 knob or 5447 lever

Soho Single Point Escutcheon Trimw/ 5485 lever

.LENT or .RENT

.ENTR

1. Pick Your Handleset Trim, w/ knob or lever:

M502 – Cody 3/4 Escutcheon Trim M504 – Cody Full Escutcheon Trim M512 – Boulder 3/4 Escutcheon Trim M514 – Boulder Full Escutcheon Trim

Right hand = R Right hand reverse bevel = RRLeft hand = L Left hand reverse bevel = LR

Right hand lever strength = RLS Right hand reverse bevel lever strength = RRLSLeft hand lever strength = LLS Left hand reverse bevel lever strength = LRLS

M502 . XXX . ENTR

m = MORTISE FUNCTION xxx = FINISH Entr = ENTRANCE FUNCTION, W/ OVAL KNOB

502 = CODY ¾ PLATE TRIM

door tHicknEss 1.375˝ (35mm) 1.75˝ (44mm) 2˝ (51mm) 2.25˝ (57mm)Cylinder Length 1.25˝ 1.5˝ 1.625˝ 1.75˝Single Cylinder 8323.xxx 8325.xxx 8326.xxx 8327.xxx

Double Cylinder* 8323.xxx.DBL 8325.xxx.DBL 8326.xxx.DBL 8327.xxx.DBLBlocking Ring 8440.xxx.001 - 8440.xxx.001 8440.xxx.001**

NOTE: For doors > 1.75˝ thick and ≤ 2.25˝ thick, use Thick Door Kit 6501.000.A*Double cylinder for use on back-to-back sets.**Two blocking rings required.

3. Pick Your Cylinder:

2. Pick Your Mortise Box:

BacksEt door tHicknEss Function

mortisE Box Handing

part numBEr Handing

part numBEr

2.75˝ 1.75˝ and up Residential Entrance 6020 R 6020.xxx.R RLS 6020.xxx.RLS

L 6020.xxx.L LLS 6020.xxx.LLS

RR 6020.xxx.RR RRLS 6020.xxx.RRLS

LR 6020.xxx.LL LRLS 6020.xxx.LRLS

2.75˝ 1.75˝ and up Residential Entrance 6021 R 6021.xxx.R RLS 6021.xxx.RLS

Emergency Egress L 6021.xxx.L LLS 6021.xxx.LLS



2.75˝ 1.75˝ and up Entrance Back-to-Back 6025 - - - -

2.5˝ 1.375 /1.75 and up Residential Entrance 6320 R 6320.xxx.R RLS 6320.xxx.RLS

L 6320.xxx.L LLS 6320.xxx.LLS



2.5˝ 1.375/1.75 and up Residential Entrance 6321 R 6321.xxx.R RLS 6321.xxx.RLS

Emergency Egress L 6321.xxx.L LLS 6321.xxx.LLS



2.5˝ 1.375/1.75 and up Entrance Back-to-Back 6325 - - - -

knoB lEvEr

imagEs – ordEring imagEs mortisE

ExamplE:

145

FinisH EquivalEncy grid* trim Finish kit Finish

003 221030 221031 221033 221038 037040 221050 102055 140056 140060 221063 221102 102112 112140 140150 140151 151190 102260 140264 140402 102412 112432 112452 151

*Does not apply to 6501 A-C kits due to blocking rings

037, 102, 112Kit For Entrance Trim No. 140, 151, 221

6599.xxx.THKA Monterey (6565, .0937”), Princeton (6564, .0937”)

6599.xxx.THKB Victoria (6948, .1875”), Kensington (6950, .3125”)

6599.xxx.THKC San Diego (6540, .0937”), Lancaster (6543, .0937”) Charleston (6556, .0937”), Plymouth (6572, .0937”) Richmond (6557, .0937”), Renssalear (6568, .0937”) Dallas (6931, .0937”)

6599.xxx.THKD Bristol (6963, .375”), Concord (6571, .25”) $15

6599.xxx.THKE Springfield (6573, .3125”), Lexington (6560, .3125”), Charlotte (6937, .3125”), Atlanta (6570, .375”) Minneapolis (6976, .375”), Boulder (M512/M514, .53”) Cody (M502/M504, .53”), Trenton (6567, .1875”) Pasadena (6944, .375”)

6599.xxx.THKF Williamsburg (6549, .3125”)

6599.xxx.THKG Metropolitan (6949, .25”), New York (6562, .25”)

6599.xxx.THKH Chicago (6563, .0937”)

6599.xxx.THKI Edinburgh (6952, .435”), Richland (6999, .435”)

6599.xxx.THKJ Edinburgh Sectional (6515, .5625”), Oval Edinburgh (6516, .5625”) Bristol Sectional (6520, .5625”), 3/4 Kensington (6526, .5625”) $20

6599.xxx.THKK Hamilton (6544, .75”), Tremont (6542, .75”), Empire (6545, .75”)

6599.xxx.THKL Lakeshore (6966, .396”) $30

rEquirEd for all doors over 1.75˝ and up to 2.25˝ thickThick Door Kits are for Handlesets ONLY, not Entrance Sets (Entrance sets are knob x knob or lever x lever)

tHick stEEl door kits – 1.75˝ to 2.25˝ door tHicknEssmortisE HandlEsEts

tHick door kits – 1.75˝ to 2.25˝ stEEl doors (mortisE)

Give your doors of distinction the

hardware to match with Baldwin luxury

entrysets—now easily compatible with

custom decorative iron/steel doors in a

wide range of thicknesses.

> Kits available for doors 1.5˝ to 2.25˝ thick> Mortise and tubular options available> Choose from dozens of Baldwin styles> Easy to implement

Kit For Entrance Trim No.

6501.000.A 6540, 6541, 6543, 6549, 6556, 6557, 6560, $4 6564, 6565, 6567, 6568, 6570, 6571, 6572, 6573, 6931,6937, 6946, 6948, 6950, 6963, 6976 active & dummy

6501.000.B 6548, 6562, 6563, 6910, 6949 active & dummy 18

6501.000.C 6944, 6952, 6999 active & dummy 26

6501.000.D 6542, 6544, 6545 ACTIVE ONLY 14

6501.000.E 6542, 6544, 6545 DUMMY ONLY 20

6501.000.F 6966 ONLY 23

rEquirEd for all doors over 1.75˝ and up to 2.25˝ thickThick Door Kits are for Handlesets ONLY, not Entrance Sets (Entrance sets are knob x knob or lever x lever)

tHick door kits – HandlEsEts only

145

030, 031, 033, 034 038, 040, 050 060, 102, 112 150, 151 003, 055, 056Kit For Entrance Trim No. 190, 260, 264 402, 412, 452

6501.xxx.15A San Diego (6540, .0937”), Lancaster (6543, .0937”) Charleston (6556, .0937”), Plymouth (6572, .0937”) $37 $40 Richmond (6557, .0937”), Renssalear (6568, .0937”) Dallas (6931, .0937”)

6501.xxx.15B Monterey (6565, .0937”), Princeton (6564, .0937”) $37 $40

6501.xxx.15C Chicago (6563, .0937”) $27 $30

037, 102, 112 140, 151, 221

6501.xxx.15D Victoria (6948, .1875”), Kensington (6950, .3125”) Edinburgh (6952, .435”) $27

6501.xxx.15E Trenton (6567, .1875”), Concord (6571, .25”) $27

6501.xxx.15F Metropolitan (6949, .25”) $27

6501.xxx.15G New York (6562, .25”) $22

6501.xxx.15H Williamsburg (6549, .3125”) $27

6501.xxx.15I Springfield (6573, .3125”), Lexington (6560, .3125”), Charlotte (6937, .3125”), Atlanta (6570, .375”) Minneapolis (6976, .375”), Boulder (M512/M514, .53”) Cody (M502/M504, .53”), $27

6501.xxx.15J Lakeshore (6966, .396”) $27

6501.xxx.15L Richland (6999, .435”) $34

6501.xxx.15M Pasadena (6944, .375”) $34

6501.xxx.15N Bristol (6963, .375”), Edinburgh Sectional (6515, .5625”) Oval Edinburgh (6516, .5625”), Bristol Sectional (6520, .5625”) 3/4 Kensington (6526, .5625”) $27

6501.xxx.15O Hamilton (6544, .75”), Tremont (6542, .75”) Empire (6545, .75”) $34

rEquirEd for all doors 1.5˝ and up to 1.625˝ thickThin Door Kits are for Handlesets ONLY, not Entrance Sets (Entrance sets are knob x knob or lever x lever)

030, 031, 050 102, 112 150, 151 003, 055, 056Kit For Entrance Trim No. 190, 260, 264 402, 412, 452

5397.xxx.15A Handleset w/ knoB: Bethpage (85327) Buckingham (85380), Canterbury (85305 ), Glennon (85375), Logan (85305 & 85315) $43 46

Madison (85320) & Nantucket (85370)

5397.xxx.15B Handleset w/ lEvEr: Bethpage (85327) Buckingham (85380), Canterbury (85305 ), Glennon (85375), Logan (85305 & 85315) 43 46

Madison (85320) & Nantucket (85370)

5397.xxx.15C Tahoe w/ knoB (85325) 43 46

5397.xxx.15D Tahoe w/ lEvEr (85325) 43 46

5397.xxx.15E EgrEss: Bethpage 3/4 (85337), Blakely (85360) Boulder (85354), Cody (85352) 43 46 Manchester (85350), Stonegate (85335)

5397.xxx.15F EgrEss: Bristol (6420), Boulder (6402), Cody (6403) Devonshire (6401), Edinburgh (6415 & 6416) 43 46 Kensington (6426)

5397.xxx.15G EgrEss: Tahoe 3/4 (85340) 43 46

tHin stEEl door kits – 1.5˝ to 1.625˝ door tHicknEssmortisE HandlEsEts

tHin stEEl door kits – 1.5˝ door tHicknEsstuBular HandlEsEts

tHin door kits – 1.5˝ to 1.625˝ stEEl doors (mortisE & tuBular)

147

BACKSET: 2.75˝ – for doors 1.75˝ thick and over STEEL CASE: .875˝ × 4˝ × 5.5˝ (22 × 102 × 140mm)

2.5˝ – for doors 1.375˝ thick and over, 1.375˝ doors REQUIRE 1˝ FRONT STEEL CASE: .75˝ × 3.5˝ × 5.5˝ (19 × 89 × 140mm)

1.5˝ (38mm) and 2˝ (51mm) Narrow Backset – for doors 1.375˝ thick and over STEEL CASE: 1.5˝ Backset: .75˝ × 1.5˝ × 5.5˝ (19 × 64 × 140mm)

2.0˝ Backset: .75˝ × 3˝ × 5.5˝ (19 × 76 × 140mm)LOCK SPECIFICATIONS: > Standardized heavy steel case is smooth, easy to mortise, and assures snug and solid fit in door mortise. > Vital interior working parts are made of solid hot forged brass or steel for a lifetime of trouble-free operation. > All lock cases are constructed of heavy gauge steel (.093–2.4mm - material) and plated with a protective rust-

resistant coating to retard oxidation.> All locks and strikes are designed to fit standard preparation ANSI A115.1 (face cutouts are subject to variation). > Locks have adjustable forged brass lock fronts, protected by armored scalp fronts for ultimate Strength and

protection against tampering.> All KEYED lock functions illustrated within this section are furnished with a specially-designed security strike

constructed of high grade steel for ultimate Strength and durability. The security strike is mortised into the wood jamb and anchored to the structural components of the opening with two 3˝ steel screws and covered with a finished strike to conceal the fasteners.

> Most lock functions are completely reversible in the field to facilitate installation> The bevel of front is adjustable from flat to standard bevel .125˝ on 2˝ (3mm on 51mm). > Most metal door and frame manufacturers have provided reinforcements for Baldwin Mortise Locks.FRONT: Hot forged brass .218˝ × 1.25˝ × 8˝ (6 × 32 × 203mm). Adjustable for beveled conditions.SCALP: Wrought brass and bronze, available in standard finishes.ANTI-FRICTION LATCH BOLT: Furnished with all 2.75˝ and 2.5˝ backset locks 2.75˝ – .625˝ × 1˝ (16 × 25mm) × .75˝ (19mm) throw. 2.5˝ – .5˝ × 1˝ (13 × 25mm) × .75˝ (19mm) throw Furnished in US4 and 26D finishes to match trimSOLID LATCH BOLT: All 1.5˝ (38mm) and 2˝ (51mm) backset locks are furnished standard with a solid latch bolt of .5˝ (13mm) throw and 1˝ (25mm) wide front. An optional 1.25˝ (32mm) wide front is available.DEADBOLT: 2.5˝ and 2.75˝ backsets equipped with a 1˝ (25mm) throw deadbolt with two hardened steel inserts for maximum protection and security. All deadbolts are of forged brass construction. Locks designed with 1.5˝ (38mm) and 2˝ (51mm) backsets have a .5˝ (13mm) throw deadbolt. Furnished in US4 and 26D finishes to match trim.HUB SIZE: .29˝ (7mm) with two-way rotation. Broached on the diamond. (One-way rotation on LS functions).SPACING: center to center of: Knob Hub to cylinder 3.437˝ (87mm) Knob Hub to turn piece 2.25˝ (57mm)CYLINDER: Standard mortise type with 03 keyway and two nickel silver keys. Cylinder is not supplied with lock.KEYING: All levels of Keying including Construction Keying are available. For additional information, refer to xxxxxxx.STRIKE: Wrought brass and bronze finished to match. Supplied to ANSI standard A115.1, 1.25˝ (32mm) lip to center. Locks furnished standard with straight lip strike (Universal) and dust box. Curved lip and special length strikes available. All KEYED lock functions are furnished standard with a high grade steel security strike and two 3˝ steel screws.TEMPLATE: Metal doors/frames to be prepared in accordance with ANSI A115.1 or A115.11. Face cutouts are subject to variation. always review trim requirements before door preparation.warning: 1.5˝ AND 2.0˝ BACKSET LOCKS ARE designed to be used with levers. If knobs are specified, customer should be advised that the knob will only turn in one direction and will have a stiff turning action: NOT RECOMMENDED.

mortisE locks – spEciFications

147

All 2.5˝ and 2.75˝ Entrance Mortise Locks are U/L Listed

Baldwin UL-listed 2.5˝ and 2.75˝ mortise locks meet US standard UL-10C and Canadian standard CAN4 S104-M80for survival of a 3-hour burn under positive pressure.All Baldwin Estate Collection mortise entry trim and Estate Collection knob/lever trim may be used with Baldwin UL-listed mortise locks.


149

2.75˝ BACKSET 2.5˝ BACKSET TRIM (Handle Sets, (Handle Sets, 2˝ BACKSET 1.5˝ BACKSET SYMBOL DESCRIPTION Knobs & Levers) Knobs & Levers) (Handle Sets, Levers) (Handle Sets, Levers)

ENTR ENTRANCE FUNCTION 6001, 6010, 6020, 6301, 6310, 6320, 6802, 6812, 6832 6800, 6810, 6830 6021, 6070, 6075, 6321, 6375 6077, 6091

SGLC SINGLE CYLINDER FUNCTION 6051, 6053, 6060, — — — 6065, 6066, 6130

ExTR ExTERIOR PATIO FUNCTION 6055, 6100 6315 6847 6845

PRIV PRIVACY FUNCTION 6055, 6100 6315 6847 6845

PASS PASSAGE FUNCTION 6110 6318 6857 6855

DM DUMMY TRIM - ONE SIDE OF DOOR — — — —

FD FULL DUMMY TRIM — — — —

HOTL HOTEL FUNCTION 6091 — — —

BB75 BACK TO BACK HANDLE SETS 6025, 6030 6325 — —

NOTE: Entrance function locks may be used in either single cylinder or double cylinder applications.TO ORDER: 2.75˝/2.5˝ backset locks for levers, specify LS (Lever Strength) after lock number (i.e. 6375.030.RLS LOCK - RH).NOTE: 1.5˝ and 2.0˝ Backset Locks are designed to be used with levers. If knobs are specified, customer should be advised that the knob will only turn in one direction and will have a stiff turning action: NOT RECOMMENDED.CURVED LIP STRIKES: Locks may be ordered with curved lip strikes. The hand of strike will match the hand of the door. Please specify hand of door when ordering. A left hand reverse door will use a right hand strike and a right hand reverse door will use a left hand strike.* Optional 1˝ (25mm) front with .75˝ (19mm) solid latch bolt available for doors of 1.375˝ (35mm) in thickness. Furnished standard with a curved lip strike.


149

mortisE locks – How to ordEr

6897.xxx – raBBEtEd door strikEUsed with all 1.5˝ (38mm), 2˝ (51mm), 2.5˝ (64mm) backset locks (6300, 6800 Series)FEATURES: Rabbeted strikes and pieces are used on pairs of doors that have a meeting rail which is rabbeted or on single doors that have a rabbeted frame. The strike is designed to fit in a .5˝ (13mm) rabbet; a separate rabbeted piece conforms to the face of the lock. This rabbeted assembly is available for locks with 1.25˝ (32mm) wide fronts only.SIZES: Strike 1˝ × 5˝ (25 × 127mm) (Non-Handed); Rabbeted Piece: .5˝ × 8˝ (13 × 203mm)IMPORTANT NOTES: 1. RABBETED STRIKE AND PIECE ARE ONLY AVAILABLE FOR 1.75˝ (44mm) DOORS. 2. When a rabbeted strike is ordered in conjunction with a keyed function lock, a steel security

strike is NOT supplied.PACKED: One complete set in a box with appropriate fasteners.ORDERING INSTRUCTIONS: 6897 — Used with all 1.5˝ (38mm), 2˝ (51mm), 2.5˝ (64mm) backset locks (6300, 6800 Series). All locks which are furnished standard with a 1˝ (25mm) wide front must be ordered with a 1.25˝ (32mm) wide front.

not availaBlE For 2.75˝ BacksEt locks

suffix* minus strike* with 1˝ Front*Right hand .R .RDT .R1DTLeft hand .L .LDT .L1DTRight hand Reverse bevel .RR .RRDT .RR1DTLeft hand Reverse bevel .LL .LRDT .LR1DTRight hand Lever Strength .RLS .RLSDT .RLS1DTLeft hand Lever Strength .LLS .LLSDT .LLS1DTRight hand Reverse bevel Lever Strength .RRLS . RRLSDT .RRLS1DTLeft hand Reverse bevel Lever Strength .LRLS . LRLSDT .LRLS1DT

1. all mortise locks have a handed suffix (.r or .l)

2. all mortise locks are either knob strength (no addition to suffix) or lever strength (ls added to the suffix)

warning: do not usE lever strength mortise locks with knobs. they only turn one way and have a stiff turning action suitable for levers.

3. other mortise lock options: reverse Bevel doors (rr or lr) minus strike (dt), when an Extended lip strike is needed (order strike separately) optional 1˝ Front (1) for 1.375˝ doors

always rEviEw suFFix cHart!

suFFix cHart

151

6001 – 2.75˝, 6301 – 2.5˝, 6800 – 1.5˝ (lever strength only), 6802 – 2˝ (lever strength only)EntrancE and apartmEnt> Latch bolt by knob from either side, except when outside knob is locked by stop in front; then latch bolt by key outside and knob inside. > Deadbolt by key outside and turn piece inside. Continuous turn of key outside retracts both latch and Deadbolt.> 1˝ (25mm) throw Deadbolt with saw-proof inserts is standard equipment. (Not available for 2˝ or smaller backsets)> When extended, Deadbolt deadlocks latch bolt (not true for 6800 & 6802) FEDERAL SPECIFICATION EQUIVALENTS (FSE): ANSI Series: 1000-F08/F10 NOTE: For single and double cylinder applications

6025 – 2.75˝, 6325 – 2.5˝Back-to-Back EntrancE> Latch bolt by thumb piece from either side, except when outside thumb piece is locked by stop in front, then latch bolt by key either side and thumb piece inside. > Deadbolt by key either side, continuous turn of key retracts both latch and Deadbolt.> 1˝ (25mm) throw Deadbolt with saw-proof inserts is standard equipment. When extended, Deadbolt deadlocks latch bolt. NOTE: To order and price complete trim sets, order two sets of exterior handle trim in “BBxx˝ configuration. Baldwin Turn Knob cylinder 844x.xxx may be used for interior.

6030 – 2.75˝puBlic EntrancE> Latch bolt by thumb piece either side. Deadbolt by key either side.> 1˝ (25mm) throw Deadbolt with saw-proof inserts is standard equipment. When extended, Deadbolt deadlocks latch bolt. FSE: ANSI Series: 1000-F25 NOTE: To order and price complete trim sets, order two sets of exterior handle trim in “BBxx˝ configuration. Baldwin Turn Knob cylinder 844x.xxx may be used for interior.

6066 – 2.75˝ElEctric strikE EntrancE> Latch bolt by knob inside and key outside. Outside trim is always rigid.> Auxiliary latch deadlocks latch bolt. > Optional solid latch bolt is available with this lock.> Caution should be used to ensure that the electric strike being used properly engages

the latch mechanism while depressing the auxiliary latch. NOTE: A full dummy trim with an active spindle is recommended for use with this lock.

6020 – 2.75˝, 6320 – 2.5˝ , 6830 – 1.5˝ (lever strength only), 6832 – 2˝ (lever strength only)rEsidEntial EntrancE> Latch bolt by thumb piece outside and knob inside, except when thumb piece is locked by stop in front; then latch bolt by key outside and knob inside. > Deadbolt by key outside and turn piece inside. > Continuous turn of key outside retracts both latch and Deadbolt.> 1˝ (25mm) throw Deadbolt with saw-proof inserts is standard equipment. (Not available for 2˝ or smaller backsets) When extended, Deadbolt deadlocks latch bolt.(not true for 6830 & 6832) FSE: Government Type: 122A NOTE: May be used in single and double cylinder applications

6021 – 2.75˝, 6321 – 2.5˝rEsidEntial EntrancE, EmErgEncy EgrEss> Latch bolt by thumb piece outside and knob inside, except when thumb piece is locked by stop in front; then latch bolt by key outside and knob inside. > Deadbolt by key outside and turn piece inside. > When Deadbolt is thrown, stop is automatically activated making outside thumb piece rigid. Inside knob retracts latch and Deadbolt simultaneously but DOES NOT free outside thumb piece.> 1˝ (25mm) throw Deadbolt with saw-proof inserts is standard equipment. When extended, Deadbolt deadlocks latch bolt. NOTE: Not recommended for double cylinder applications. NOTE: 6321 - NOT FIELD REVERSIBLE

mortisE locks – EntrancE Functions

151

mortisE locks – EntrancE Functions 031, 033, 034, 038 040, 050, 060 102, 112, 150 003 Std. 151, 152, 190 055Item # Description Backset Wt. Strike 260, 264 0566001.xxx.Suffix* Entrance/Apartment Knob x Knob/Lever x Lever 2.75˝ 3.0 60406020.xxx.Suffix* Residential Entrance Handleset x Knob/Lever 2.75˝ 3.0 60406021.xxx.Suffix* Entrance – Emergency Egress Handleset x Knob/Lever 2.75˝ 3.0 60406025.xxx Entrance Back-to-Back Handleset x Handleset 2.75˝ 3.0 60406030.xxx Public Entrance Handleset x Handleset 2.75˝ 3.3 6040 6066.xxx.Suffix* Electrified Strike Entrance Handleset x Knob/Lever 2.75˝ 2.8 NR* $299 3176075.xxx.Suffix* Entrance – Emergency Egress Knob x Knob/Lever x Lever 2.75˝ 3.0 60406077.xxx.Suffix* Entrance – Emergency Egress w/ Augiliary Latch Knob x Knob/Lever x Lever 2.75˝ 3.0 60436080.xxx.Suffix* Entrance – Emergency Egress w/ Augiliary Latch Knob x Knob/Lever x Lever 2.75˝ 3.0 60436085.xxx.Suffix* Apartment Entrance Knob x Knob/Lever x Lever 2.75˝ 3.0 60416091.xxx.Suffix* Hotel Knob x Knob/Lever x Lever 2.75˝ 3.0 6043

6301.xxx.Suffix* Entrance/Apartment Knob x Knob/Lever x Lever 2.5˝ 3.0 63406310.xxx.Suffix* Entrance/Storeroom Knob x Knob/Lever x Lever 2.5˝ 3.0 63406320.xxx.Suffix* Residential Entrance Handleset x Knob/Lever 2.5˝ 3.0 6340 $299 3176321.xxx.Suffix* Entrance – Emergency Egress Handleset x Knob/Lever 2.5˝ 3.0 63406325.xxx Entrance Back-to-Back Handleset x Handleset 2.5˝ 3.0 63406375.xxx.Suffix* Entrance – Emergency Egress Knob x Knob/Lever x Lever 2.5˝ 3.0 6340

6800.xxx.Suffix* Entrance/Apartment Lever x Lever 1.5˝ 3.0 63406802.xxx.Suffix* Entrance/Apartment Lever x Lever 2˝ 3.0 63406810.xxx.Suffix* Entrance/Storeroom Lever x Lever 1.5˝ 3.0 6340 $299 3176812.xxx.Suffix* Entrance/Storeroom Lever x Lever 2˝ 3.0 63406830.xxx.Suffix* Residential Entrance Handleset x Lever 1.5˝ 3.0 63406832.xxx.Suffix* Residential Entrance Handleset x Lever 2˝ 3.0 6340All Mortise Locks shown above Minus Strike (.DT) – Order w/ strike separately through Baldwin Customer Ser vice $277 292

mortise locks not available in distressed finishes, non-distressed equalavelents 402=102, 412=112, 452=152non-standard width 1˝ fronts available for a 10% additional charge – to order, add a ‘1’ at the end of the item # (except reverse Bevel)\*nr = not required

> Specify handing with Suffix* after finish designation (Suffix chart above left)> Some Baldwin mortise locks are reversible in the field if needed – see individual functions WARNING: DO NOT USE lever Strength mortise locks with knobs. They only turn one way and have a stiff turning action suitable for levers.6075 – 2.75˝, 6375 – 2.5˝

EntrancE, EmErgEncy EgrEss> Latch bolt by knob from either side, except when outside knob is locked by stop in front; then latch bolt by key outside and knob inside. Deadbolt by key outside and turn piece inside. When Deadbolt is thrown, stop is automatically activated making outside knob rigid. Inside knob retracts latch and Deadbolt simultaneously but DOES NOT free outside knob.> 1˝ (25mm) throw Deadbolt with saw-proof inserts is standard equipment. When extended, Deadbolt deadlocks latch bolt. FSE: ANSI Series: 1000-F12/F20 NOTE: Not recommended for double cylinder applications. NOTE: 6375 - NOT FIELD REVERSIBLE

6077 – 2.75˝EntrancE, EmErgEncy EgrEss> Latch bolt by knob from either side, except when outside knob is locked by stop in front; then

latch bolt by key outside and knob inside. Deadbolt by key outside and turn piece inside. When Deadbolt is thrown, stop is automatically activated making outside knob rigid. Inside knob retracts latch and Deadbolt simultaneously but DOES NOT free outside knob.> 1˝ (25mm) throw Deadbolt with saw-proof inserts is standard equipment. When extended, Deadbolt deadlocks latch bolt. > Auxiliary latch bolt deadlocks latch bolt, creating a DOUBLE DEADLOCKING FEATURE when the Deadbolt is extended. FSE: ANSI Series: 1000-F20 NOTE: NOT FIELD REVERSIBLE. Not recommended for double cylinder applications.

6310 – 2.5˝, 6812 – 2˝ , 6810 – 1.5˝ EntrancE and storEroom> Latch bolt by knob either side. Deadbolt by key outside and turn piece inside.> 1˝ (25mm) throw Deadbolt with saw-proof inserts is standard equipment. (Not available for 2˝ or smaller backsets) When extended, Deadbolt deadlocks latch bolt. FSE: ANSI Series: 1000-F21 NOTE: for single and double cylinder applications.

6091 – 2.75˝HotEl> Latch bolt by knob inside and key outside. Outside knob is always rigid. Deadbolt by turn piece inside which shuts out all keys except emergency and display keys. Inside knob retracts latch bolt and deadbolt simultaneously. > Auxiliary latch deadlocks latch bolt.> 1˝ (25mm) throw deadbolt with saw-proof inserts is standard equipment.> Furnished standard with a 1.25˝ (32mm) wide key bow and 6 pin cylinder. Hotel key bow is available at an additional charge. Consult price list.NOTE: NOT FIELD REVERSIBLE.

suffix* Right hand ——————————.R Left hand ——————————.LRight hand Reverse bevel —————.RR Left hand Reverse bevel ——————.LL Right hand Lever Strength —————.RLS Left hand Lever Strength —————.LLS Right hand Reverse bevel Lever Strength —.RRLS Left hand Reverse bevel Lever Strength —.LRLS Right hand Reverse bevel Lever Strengthwith 1 ̋Strike —————————.RRB1 Left hand Reverse bevel Lever Strengthwith 1 ̋Strike —————————.LRB1

*FOR THICK DOOR APPLICATIONS, SEE PAGE 156

spindle key

153

g6010 – 2.75˝g6310 – 2.5˝ dormitory EntrancE or storEroomLatch bolt by handle either side. Deadbolt by key outside and thumbturn inside. Use of inside handle retracts latch and deadbolt simultaneously automatically unlocking outside handle.FEDERAL SPECIFICATION EQUIVALENTS (FSE): ANSI Series: 1000-F21

g6065 – 2.75˝g6365 – 2.5˝ storEroom or closEtLatch bolt by handle inside and key outside. Outside handle always rigid. Auxiliary latch deadlocks latch bolt.FSE: ANSI Series: 1000-F07

g6075 – 2.75˝g6375 – 2.5˝EntrancE or apartmEntLatch bolt by key outside and handle either side unless outside handle is locked by toggle action stop. Deadbolt by key outside and thumbturn inside. Use of inside handle retracts latch and deadbolt. Outside handle remains locked.FSE: ANSI Series: 1000-F12

g6085 – 2.75˝g6385 – 2.5˝EntrancE or puBlic rEstroomLatch bolt by handle either side unless outside handle is locked by master key from inside. When outside handle is locked, latch Bolt by key outside and handle inside. Auxiliary latch deadlocks latch bolt.FSE: ANSI Series: 1000-F09

mortisE locks – gradE 1, ligHt-duty commErcial

g6055 – 2.75˝g6355 – 2.5˝privacy, BEdroom or BatHroomLatch bolt by handle either side. Deadbolt by thumbturn inside and emergency key outside. Use of inside handle retracts latch and dead bolt simultaneously - automatically unlocking outside handle.FSE: ANSI Series: 1000-F19

g6090 – 2.75˝g6390 – 2.5˝storEroomLatch bolt by handle inside and guest/master key outside. Outside handle always rigid. Deadbolt by thumbturn inside and service key only outside. FSE: ANSI Series: 1000-F14

g6060 – 2.75˝g6360 – 2.5˝ classroom, EntrancE or oFFicELatch bolt by key outside and handle either side unless outside handle is locked by key outside. Auxiliary latch deadlocks latch bolt.FSE: ANSI Series: 1000-F04

g6091 – 2.75˝g6391 – 2.5˝HotEl or motElLatch bolt by handle inside and guest/master key outside. Outside handle always rigid. Deadbolt by thumbturn inside and service key only outside. Use of inside handle retracts latch and deadbolt simultaneously. Auxiliary latch deadlocks latch bolt.FSE: ANSI Series: 1000-F15

g6077 – 2.75˝g6377 – 2.5˝EntrancE or apartmEntLatch bolt by key outside and handle either side unless outside handle is locked by toggle-action stop. Deadbolt by key outside and thumbturn inside. Use of inside handle retracts latch dead bolt simultaneously. Outside handle remains locked. Auxiliary latch dead locks latchbolt and prevents manipulation of locked toggle-action stop.FSE: ANSI Series: 1000-F20

application: spEciFication: Baldwin Architects/Designers and Dealer Network Grade 1: Meets/exceeds operational, security and cycle test requirementshave requested the ability to utilize Baldwin Estate U/L: ANSI/UL 10B Listed 3 Hour Fire Rated – UL File No. R13846Trims in light-duty commercial projects (guest rooms, Backsets: 2 ½ and 2 ¾ inch standard Other Sizes Availablecondominium). The Baldwin G6000/G6300 line Case: Heavy Gage Plated Steelof Mortise Locks will provide this capability. All Armor Front: Wrought Brass, Bronze or S/S. Adjustable Bevel Optionexisting Baldwin lever by lever entrance and Latch Bolt: ¾”” Throw. Brass – Anti-Friction Typesectional set locksets are adaptable. Dead Bolt: 1” Throw. Brass – with Harden Steel Inserts Reversibility: Most functions are field reversible. Factory Door Preparation: For use with metal doors and sets handing to order.frames to be prepared in accordance with Strikes: Flat standard, curved and long lip strikes available.ANSI A 115.11. otHEr spEciFication: 3.437 in lever hub to cylinder center spacing note: designed to be used with existing Baldwin Estate Trim 7.2mm spindle on the diamond for use with Estate Levers

153

g6130 – 2.75˝g6330 – 2.5˝classroomLatch bolt by key outside and handle either side unless outside handle is locked by key outside. Auxiliary latch deadlocks latch bolt.FSE: ANSI Series: 1000-F05

mortisE locks – gradE 1, ligHt-duty commErcial

g6140 – 2.75˝g6340 – 2.5˝kEy x kEy dEadlockDeadbolt by key either side. FSE: ANSI Series: 1000-F16

g6150 – 2.75˝g6350 – 2.5˝singlE kEy dEadlockDeadbolt key outside. No inside operation.FSE: ANSI Series: 1000-F18

g6160 – 2.75˝g6361 – 2.5˝kEy x turn dEadlockDeadbolt by key outside and thumbturn inside.FSE: ANSI Series: 1000-F17

g6110 – 2.75˝g6318 – 2.5˝passagE or closEtLatch bolt operated by handle either side at all times. Both handles always free.FSE: ANSI Series: 1000-F01

suffix* Right hand Lever Strength —————.RLS Left hand Lever Strength —————.LLS Right hand Reverse bevel Lever Strength —.RRLS Left hand Reverse bevel Lever Strength —.LRLS

swivel spindles are recommended for all grade 1 mortise locks, except g110-g311 passage

wHEn ordEring cylindErsall g-series light commercial mortise locks require a special cylinder.

use the existing cylinder chart (back flap) for cylinder length, but add a suffix ‘.EmHt’ to the end of the item #.(same price as standard C keyway cylinders)

ExamplE: Lifetime Polished Brass 1.25˝ cylinder for G-series mortise locks

8323.003.EMHT

spindle key

031, 033, 034, 038 040, 050, 060 102, 112, 150 003 151, 152, 190 055Item # Description ANSI Backset 260, 264 056G6010.xxx.Suffix* Dormitory Entrance or Storeroom Lever x Lever F21 2.75˝ $329 349G6055.xxx.Suffix* Privacy, Bedroom or Bathroom Lever x Lever F19 2.75˝ 288 306G6060.xxx.Suffix* Classroom, Entrance or Office Lever x Lever F04 2.75˝ 288 306G6065.xxx.Suffix* Storeroom or Closet Lever x Lever F07 2.75˝ 288 306G6075.xxx.Suffix* Entrance or Apartment Lever x Lever F12 2.75˝ 329 349G6077.xxx.Suffix* Entrance or Apartment Lever x Lever F20 2.75˝ 329 349G6085.xxx.Suffix* Entrance or Public Restroom Lever x Lever F09 2.75˝ 288 306G6090.xxx.Suffix* Store Door Lever x Lever F14 2.75˝ 329 349G6091.xxx.Suffix* Hotel or Motel Lever x Lever F15 2.75˝ 329 349G6110.xxx.Suffix* Passage or Closet Lever x Lever F01 2.75˝ 288 306G6130.xxx.Suffix* Classroom Lever x Lever F05 2.75˝ 288 306G6140.xxx.Suffix* Key x Key Deadlock F16 2.75˝ 261 275G6150.xxx.Suffix* Single Key Deadlock F18 2.75˝ 261 275G6160.xxx.Suffix* Key x Turn Deadlock F17 2.75˝ 261 275G6310.xxx.Suffix* Dormitory Entrance or Storeroom Lever x Lever F21 2.5˝ 329 349G6318.xxx.Suffix* Passage or Closet Lever x Lever F01 2.5˝ 288 306G6355.xxx.Suffix* Privacy, Bedroom or Bathroom Lever x Lever F19 2.5˝ 288 306G6360.xxx.Suffix* Classroom, Entrance or Office Lever x Lever F04 2.5˝ 288 306G6365.xxx.Suffix* Storeroom or Closet Lever x Lever F07 2.5˝ 288 306G6375.xxx.Suffix* Entrance or Apartment Lever x Lever F12 2.5˝ 329 349G6377.xxx.Suffix* Entrance or Apartment Lever x Lever F20 2.5˝ 329 349G6385.xxx.Suffix* Entrance or Public Restroom Lever x Lever F09 2.5˝ 288 306G6391.xxx.Suffix* Hotel or Motel Lever x Lever F15 2.5˝ 329 349G6330.xxx.Suffix* Classroom Lever x Lever F05 2.5˝ 288 306G6340.xxx.Suffix* Key x Key Deadlock F16 2.5˝ 261 275G6350.xxx.Suffix* Single Key Deadlock F18 2.5˝ 261 275G6361.xxx.Suffix* Key x Turn Deadlock F17 2.5˝ 261 275G6390.xxx.Suffix* Store Door Lever x Lever F14 2.5˝ 329 349

mortise locks not available in distressed finishes, non-distressed equalavelents 402=102, 412=112, 452=152non-standard width 1˝ fronts available for a 10% additional charge – to order, add a ‘1’ at the end of the item # (except reverse Bevel, lrB1, rrB1)

WARNING: DO NOT USE lever Strength mortise locks with knobs.They only turn one way and have a stiff turning action suitable for levers.

155

PRIVACY FUNCTION: Latch bolt by knob either side. Deadbolt by turn piece inside and Emergency Key 0417 outside.

STEEL CASE: .625˝ × 3.375˝ × 3.75˝ (16 × 86 × 95mm)

FRONT: .156˝ × 1˝ × 5.75˝ (4 × 25 × 133mm). Adjustable for beveled conditions; finished to match.

LATCH BOLT: .5˝ × .625˝ (13 × 16mm) × .5˝ (13mm) throw. Furnished in US4 and 26D finishes to match trim.

DEAD BOLT: .5˝ × .75˝ (13 × 19mm) × .5˝ (13mm) throw. Furnished in US4 and 26D finishes to match trim.

HUB SIZE: .29˝ (7mm). Broached on the diamond.

BACKSET: 2.5˝ (64mm)

SPACING: Knob hub to turn piece: 2.25˝ (57mm)

STRIKE: Specially-designed curved lip strike is fully reversible (non-handed); available in 1.25˝ (32mm) Lip to Center dimension only.

DUST BOx: Box is furnished unattached; conceals installation marks and cutouts. ( 8530-000)

PACKED: One in a box with a strike, dust box, and fasteners.

ordEring instructions: locks are supplied as illustrated in left column. to install locks as illustrated in right column, specify the oppositE Hand oF tHE door.

installation mEtHodsLocks are reversible, may be installed in either position

030, 031, 033, 034 038, 040, 050 060, 102, 112 003 150, 151, 152 055Item # Description Backset Wt. 190, 260, 264 0568530.xxx Interior Mortise Lock – Passage Knob x Knob 2.5˝ 1.2 $124 1328535.xxx Interior Mortise Lock – Passage Lever x Lever 2.5˝ 1.28540.xxx Interior Mortise Lock – Privacy Knob x Knob 2.5˝ 1.5 133 1418545.xxx Interior Mortise Lock – Privacy Lever x Lever 2.5˝ 1.58530.xxx.FSTR T Strike for Small Case Mortise Locks 23 26

notE: 8530.xxx, 8535.xxx, 8540.xxx & 8545.xxx include a 3.5” spindle.

mortise locks not available in distressed finishes, non-distressed equalavelents 402=102, 412=112, 452=152non-standard width 1˝ fronts available for a 10% additional charge – to order, add a ‘1’ at the end of the item # (except reverse Bevel, lrB1, rrB1)

8530.xxx

8535.xxx

8540.xxx

8545.xxx

EstatE – intErior mortisE locks, small casE

small case mortise lock> Cost-effective alternative to Tubular Latch with Mortise Bolt> Quick and easy install on pre-prepared doors> Heavy gauge steel case, solid forged brass interior working parts> Completely reversible for all door conditions> Turn Pieces and Emergency Release Trim must be ordered separately (NOT included in price of lock)

Full lip strike

155

EstatE – intErior mortisE locks, HEavy duty

6060 – 2.75˝ corridor and oFFicELatch bolt by knob from either side, except when outside knob is locked by stop in front, then by key outside and knob inside.Auxiliary latch deadlocks latch bolt.FSE: ANSI Series: 1000-F04

030, 031, 033, 034 038, 040, 050 060, 102, 112 003 Std. 150, 151, 152 055Item # Description Backset Wt. Strike 190, 260, 264 0566010.xxx.Suffix* Interior Mortise Lock – Entrance & Storeroom Knob x Knob/Lever x Lever 2.75˝ 3.0 60406055.xxx.Suffix* Interior Mortise Lock – Privacy Knob x Knob/Lever x Lever 2.75˝ 2.8 60406060.xxx.Suffix* Interior Mortise Lock – Corridor/Office Knob x Knob/Lever x Lever 2.75˝ 2.8 60416065.xxx.Suffix* Interior Mortise Lock – Emergency/Utility Room Knob x Knob/Lever x Lever 2.75˝ 2.8 60416070.xxx.Suffix* Interior Mortise Lock – Dormitory/Exit Knob x Knob/Lever x Lever 2.75˝ 2.8 60406100.xxx.Suffix* Interior Mortise Lock – Bath/Bedroom Knob x Knob/Lever x Lever 2.75˝ 2.8 60406110.xxx.Suffix* Interior Mortise Lock – Passage Knob x Knob/Lever x Lever 2.75˝ 2.6 6041

$262 2786130.xxx.Suffix* Interior Mortise Lock – Classroom Knob x Knob/Lever x Lever 2.75˝ 2.8 60416315.xxx.Suffix* Interior Mortise Lock – Bath/Bedroom Knob x Knob/Lever x Lever 2.5˝ xx 63406318.xxx.Suffix* Interior Mortise Lock – Passage Knob x Knob/Lever x Lever 2.5˝ xx 63416845.xxx Narrow Interior Mortise Lock – Bath/Bedroom Lever x Lever 1.5˝ xx 63406847.xxx Narrow Interior Mortise Lock – Bath/Bedroom Lever x Lever 2˝ xx 63406855.xxx Narrow Interior Mortise Lock – Passage Lever x Lever 1.5˝ xx 63416857.xxx Narrow Interior Mortise Lock – Passage Lever x Lever 2˝ xx 6341All Mortise Locks shown above Minus Strike (.DT) – Order w/ strike separately through Baldwin Customer Ser vice $240 253

mortise locks not available in distressed finishes, non-distressed equalavelents 402=102, 412=112, 452=152non-standard width 1˝ fronts available for a 10% additional charge – to order, add a ‘1’ at the end of the item # (except reverse Bevel)

> Specify handing with Suffix* after finish designation (Suffix chart above left)> Baldwin mortise locks are reversible in the field if needed

WARNING: DO NOT USE lever Strength mortise locks with knobs. They only turn one way and have a stiff turning action suitable for levers.

6010 – 2.75˝ EntrancE and storEroomLatch bolt by knob either side. Deadbolt by key outside and turn piece inside. 1˝ (25mm) throw Deadbolt with saw-proof inserts is standard equipment. When extended, Deadbolt deadlocks latch bolt.FEDERAL SPECIFICATION EQUIVALENTS (FSE): ANSI Series: 1000-F21NOTE: for single and double cylinder applications

6055 – 2.75˝ privacyLatch bolt by knob either side. Deadbolt by turn piece inside and emergency key 0417 outside. Inside knob retracts latch and Deadbolt simultaneously, automatically unlocking outside knob.1˝ (25mm) throw Deadbolt with saw-proof inserts is standard equipment. When extended, Deadbolt deadlocks latch bolt.FSE: ANSI Series: 1000-F19

6065 – 2.75˝ EmErgEncy and utility roomAuxiliary latch deadlocks latch bolt.* Suggested for use with electric strike. Caution should be used to ensure that the electric strike being used properly engages the latch mechanism while depressing the auxiliary latch. We recommend solid latch bolt with this lock when used with an electric strike.

FSE: ANSI Series: 1000-F07NOTE: For handle set applications, refer to Function 6066.

6070 – 2.75˝ dormitory and ExitLatch bolt by knob either side. Deadbolt by key outside and turn piece inside. When Deadbolt is projected, latch bolt is deadlocked and outside knob is rigid. Inside knob retracts latch and Deadbolt simultaneously, automatically unlocking outside knob.1˝ (25mm) throw Deadbolt with saw-proof inserts is standard equipment. When extended, Deadbolt deadlocks latch bolt.FSE: ANSI Series: 1000-F13

6110 – 2.75˝, 6318 – 2.5˝6855 – 1.5˝, 6857 – 2˝ passagELatch bolt by knob either side.FSE: ANSI Series: 1000-F01

6100 – 2.75˝, 6315 – 2.5˝6845 – 1.5˝, 6847 – 2˝ BatHroom and BEdroomLatch bolt by knob either side. Deadbolt by turn piece inside and emergency key 0417 outside. 1˝ (25mm) throw Deadbolt with saw-proof inserts is standard equipment. When extended, Deadbolt deadlocks latch bolt.FSE: ANSI Series: 1000-F02

6130 – 2.75˝ classroomLatch bolt by knob either side, except when outside knob is locked by key outside, then by key outside. Inside knob is always free.Auxiliary latch deadlocks latch bolt.FSE: ANSI Series: 1000-F05

suffix* Right hand ——————————.R Left hand ——————————.LRight hand Reverse bevel —————.RR Left hand Reverse bevel ——————.LL Right hand Lever Strength —————.RLS Left hand Lever Strength —————.LLS Right hand Reverse bevel Lever Strength —.RRLS Left hand Reverse bevel Lever Strength —.LRLS Right hand Reverse bevel Lever Strengthwith 1 ̋Strike —————————.RRB1 Left hand Reverse bevel Lever Strengthwith 1 ̋Strike —————————.LRB1

spindle key

157

8550

singlE cylindErsFUNCTION: Dead bolt by cylinder key one side only INCLUDED: 8300 Cylinder CollarNOTE: 6150 & 6850 may be used in double cylinder applications

mortisE – dEadlocks

BACKSET: 2.75˝ Backset STEEL CASE: .875˝ × 4˝ × 5.5˝ (22 × 102 × 140mm)

2.5˝ Backset STEEL CASE: .625˝ × 3.375˝ × 3.75˝ (16 × 86 × 95mm) FRONT: .156˝ × 1˝ × 5.75˝ (4 × 25 × 133mm). Adjustable for beveled conditions; finished to match

1.5˝ Backset STEEL CASE: .75˝ × 2.5˝ × 5.5˝ (19 × 64 × 140mm) FRONT:* .218˝ × 1˝ × 8˝ (6 × 25 × 203mm) *Optional 1.25˝ (32mm) front available

> Heavy gauge steel case with solid forged brass working parts > Completely reversible for all door conditionsDEADBOLT: .5˝ × 1.25˝ (13 × 32mm) × 1˝ (25mm) throw with two saw-proof inserts. STRIKE: Heavy gauge brass finished to match. Furnished with two 3˝ steel screws and a dust box standard (8530.000).CYLINDER: Standard mortise type not included – must be purchased separatelyPACKED: One in a box. 8300 Cylinder Collar, 8530.000 Dust Box, and fasteners.

6850

030, 031, 033, 034 038, 040, 050 060, 102, 112 003 150, 151, 152 055Item # Description Wt. Backset 190, 260, 264 0566150.xxx Single Cylinder 2.0 2.75˝

6160.xxx Turn Piece/Cylinder 2.3 2.75˝ $237 2506860.xxx Turn Piece/Cylinder 2.3 1.5˝

6850.xxx Single Cylinder 2.0 1.5˝

8550.xxx Single Cylinder 1.0 2.5˝

8555.xxx Double Cylinder 1.0 2.5˝ 145 152

8560.xxx Turn Piece/Cylinder 1.0 2.5˝

mortise locks not available in distressed finishes, non-distressed equalavelents 402=102, 412=112, 452=152

6150

8560

turn piEcE/cylindEr FUNCTION: Dead bolt by cylinder key outside and turn piece inside INCLUDED: 8300 Cylinder Collar & 6750 Turn PieceNOTE: Other turn pieces and cylinder trim are available

6860 6160

douBlE cylindErFUNCTION: Dead bolt by cylinder key from either side INCLUDED: 8300 Cylinder Collar, 2 each

8555

8550.xxx.str – strike

157

mortisE locks – ElEctrical

ElEctrical spEciFications: RATED VOLTAGE: 24V AC/24V DC – AC/DC Converter is built inside.OPERATING VOLTAGE RANGE: 22-26V AC/V DCTEST VOLTAGE: 18V AC/V DCRATED CURRENT: 0.35 Amperes (0.4 Amperes Maximum)DUTY: ContinuousSOLENOID LEAD WIRE LENGTH: 6˝ (153mm)IMPORTANT FEATURE: To facilitate installation, Solenoid is constructed inside the lock case.IMPORTANT NOTES: 1. Each electrified lock should have its own 24 volt transformer. Two or more locks may be operated in PARALLEL from a

single transformer with the proper current rating. DO NOT connect locks in a series from a higher rated transformer.2 We DO NOT recommend wiring electrified locks to a circuit containing electromagnetic devices as transient voltage can

cause damage to the lock. Transient voltage must be suppressed at its source before connecting locks to the circuit.3. A Varistor at 35 volts (peak-recurrent) may be used for transient voltage protection. 1-hole for latch bolt – Electric strike not available - must order 3rd party

APPLICATIONS: Electrically-controlled locking devices are designed for specific security and fire safety installations including: > Security Controlled Entrances > Stairwell Doors > Apartment Buildings > Computer Rooms > Remote-controlled Security Doors > Hospital/Narcotic Areas > Fire Safety Alarms > Cashier Rooms

CONTROLLING/REGULATING DEVICES: Electrified locks can be locked or unlocked by the following means: > Toggle (Wall) Switch > Computerized Controls > Master Control Consoles > Access Card Readers > Automatic Time Devices > Smoke/Fire Alarms > Security Alarms > Thermo-Sensitive Devices

6051.xxx (.ls) – Fail saFE > Latch bolt by knob either side except when outside knob is locked by energizing solenoid. > Key outside retracts latch bolt when solenoid is energized. > Inside knob is always FREE. > Auxiliary Latch deadlocks latch bolt. > IMPORTANT: POWER OFF UNLOCKS OUTSIDE KNOB.

6053.xxx (.ls) – Fail sEcurE > Latch bolt by knob either side ONLY when solenoid is energized. > Latch bolt retracted by key outside and knob inside when solenoid is NOT energized. > Inside knob is always FREE. > Auxiliary Latch deadlocks latch bolt. > IMPORTANT: POWER OFF LOCKS OUTSIDE KNOB.

030, 031, 033, 034 038, 040, 050 060, 102, 112 003 Std. 150, 151, 152 055Item # Description Backset Wt. Strike 190, 260, 264 0566051.xxx Fail Safe (power off unlocks outside knob) Knob x Knob/Lever x Lever 2.75˝ 3.0 6041 $709 7326053.xxx Fail Secure (power off locks outside knob) Knob x Knob/Lever x Lever 2.75˝ 3.0 6041All Mortise Locks shown above Minus Strike (.DT) – Order w/ strike separately through Baldwin Customer Ser vice $687 707

mortise locks not available in distressed finishes, non-distressed equalavelents 402=102, 412=112, 452=152non-standard width 1˝ fronts available for a 10% additional charge – to order, add a ‘1’ at the end of the item # (except reverse Bevel)

> Specify handing with Suffix* after finish designation (Suffix chart above left)> Baldwin mortise locks are reversible in the field if needed WARNING: DO NOT USE lever Strength mortise locks with knobs. They only turn one way and have a stiff turning action suitable for levers.

suffix* Right hand ——————————.R Left hand ——————————.L Right hand Reverse bevel —————.RR Left hand Reverse bevel ——————.LL Right hand Lever Strength —————.RLS Left hand Lever Strength —————.LLS Right hand Reverse bevel Lever Strength —.RRLS Left hand Reverse bevel Lever Strength —.LRLS

spindle key

159

specifications for all entrance strikes:THICKNESS: .093˝ (2.3mm), brass material.SCREWS: Furnished with 12 combination wood/machine screws, finished to match.TEMPLATE: Designed to fit metal/wood frames prepared in accordance to ANSI A115.1/A115.11.FEATURES: Furnished flat with rounded lip edges for universal use with left and right handed locks. CURVED LIP: Available with a curved lip. Supplied standard with all locks incorporating a solid-type latch bolt. ALWAYS SPECIFY HAND OF DOOR. Example: 6340.xxx.R. Please see ordering instructions in this section

6043.xxx – latcH/auxiliary latcH/dEadBolt Function > Use with lock functions incorporating a latch, auxiliary latch, and deadbolt> Available for 6000 Series locks only

6037, 6038, 6039, 6338, 6339.xxx – ExtEndEd lip strikEs (HandEd)> Use with locks installed on special door/frame conditions> Supplied with a curved lip only> ALWAYS SPECIFY HAND OF DOOR AND REQUIRED LENGTH> Lip to Center lengths: .R158 or .L158 – 1.625˝ (41mm) .R178 or .L178 – 1.875˝ (48mm) .R214 or .L214 – 2.25˝ (57mm) .R300 or .L300 – 3˝ (76mm)

lip to center length determined by the following formula: Door thickness ÷ 2 + .375˝ (10mm) = Lip to Center lengthRound to closest size

6042.xxx – dEad Bolt Function> Use with lock functions incorporating a deadbolt> Available for 6000 Series and 6800 Series locks only

6001.000 – dust Box> Designed to conceal installation cut-outs and marks behind strikes. Box measures 1˝-(25mm) deep for use with all lock functions and strikes. > Furnished standard with all mortise locks illustrated within this section.

ORDERING INSTRUCTIONSTo specifically order a strike with a Lip to Center dimension other than standard [1.25˝ (32mm)], use the following format: Strike Number-Finish-Hand/Required Length.ExAMPLES: Item Finish Length* 6040.030.R Strike - Right Hand 6040.030.L Strike - Left Hand 6338.030.R158 Strike × Right Hand × 1.625˝ L/C 6339.030.L178 Strike × Left Hand × 1.875˝ L/C*LENGTH: The following designations are used to describe the hand/length of the strike. R - Right Hand L - Left Hand 158 - 1.625˝ Lip to Center 214 - 2.25˝ Lip to Center 178 - 1.875˝ Lip to Center 300 - 3˝ Lip to Center

mortisE locks – EntrancE mortisE strikEs

6040.xxx, 6340.xxx – latcH/dEadBolt Function > Supplied standard with all locks > Anti-friction latch bolt6040 – Use with locks incorporating a .625˝ (16mm) wide latch bolt (6000 Series)6340 – Use with locks incorporating a .5˝ (13mm) wide latch bolt. (6300 Series and 6800 Series locks)

6041.xxx, 6341.xxx – latcH Bolt Function 6041 – Use with locks incorporating .625˝ (16mm) wide latch bolt (6000 Series)6341 – Use with locks incorporating .5˝ (13mm) wide latch bolt. (6300 Series and 6800 Series locks)

159

mortisE locks – strikEs & armorEd Fronts

031, 033, 034, 038 040, 050, 060 102, 112, 150 003asa strikes – straight lip – 1.25˝ lip-to-center 151, 152, 190 055Item # Function 260, 264 0566040.xxx 2.75˝ backset latch, deadbolt6041.xxx 2.75˝ backset latch only6043.xxx 2.75˝ backset latch, deadbolt, aux latch $25 276340.xxx 1.5,̋ 2,̋ 2.5˝ backset latch, deadbolt6341.xxx 1.5,̋ 2,̋ 2.5˝ backset latch only6001.000 Dust Box for use with mortise locks

asa strikes – curved lip – 1.25˝ lip-to-centerItem # Function Tier 1* Tier 2

6040.xxx.R (.L) 2.75˝ backset latch, deadbolt6041.xxx.R (.L) 2.75˝ backset latch only6043.xxx.R (.L) 2.75˝ backset latch, deadbolt, aux latch $25 276340.xxx.R (.L) 1.5,̋ 2,̋ 2.5˝ backset latch, deadbolt6341.xxx.R (.L) 1.5,̋ 2,̋ 2.5˝ backset latch only

Curved lip strikes are handed – order same hand as door (.R or .L)

asa strikes – Extended lip Item # Function Tier 1* Tier 2

6037.xxx.xxxx 2.75˝ backset latch, deadbolt, aux latch6038.xxx.xxxx 2.75˝ backset latch only6039.xxx.xxxx 2.75˝ backset latch, deadbolt $60 626338.xxx.xxxx 1.5,̋ 2,̋ 2.5˝ backset latch only6339.xxx.xxxx 1.5,̋ 2,̋ 2.5˝ backset latch, deadbolt6897.xxx 1.5,̋ 2,̋ 2.5˝ backset, raBBEtEd strike 98 103 Not available for 2.75˝ backset, See beginning of mortise section for detailed specs

.xxxx indicates Extended Lip to Center size = .R158, .L158, .R178, .L178, .R214, .L214, .R300, .L300

deadlock strikeItem # Function Tier 1* Tier 2

6042.xxx Deadlock function strike for 6000 & 6800 only $25 27

1.25˝ armored Fronts – standard for 2.5˝ & 2.75˝ backset mortise locksItem # Tier 1* Tier 2

6010.xxx.0004 Latch/Deadbolt $25 276021.xxx.0004 Latch/Deadbolt/Stops 25 276060.xxx.0004 Latch/Auxiliary Latch/Stops 25 276065.xxx.0004 Latch/Auxiliary Latch 25 276080.xxx.0004 Latch/Auxiliary Latch/Deadbolt/Stops 25 276091.xxx.0004 Latch/Auxiliary Latch/Deadbolt 25 276110.xxx.0004 Latch 25 276150.xxx.0004 Deadbolt 25 276301.xxx.0004 Latch/Deadbolt/Stops 25 276310.xxx.0004 Latch/Deadbolt 25 276318.xxx.0004 Latch 25 276800.xxx.0004 Latch/Deadbolt/Stops 25 276810.xxx.0004 Latch/Deadbolt 25 276855.xxx.0004 Latch 25 27

1 ˝ armored Fronts – standard for 1.5˝ & 2˝ backset mortise locksItem # Tier 1* Tier 2

6301.xxx.0084 Latch/Deadbolt/Stops $25 276310.xxx.0084 Latch/Deadbolt 25 276318.xxx.0084 Latch 25 276150.xxx.0084 Deadbolt 25 276800.xxx.0084 Latch/Deadbolt/Stops 25 276810.xxx.0084 Latch/Deadbolt 25 276855.xxx.0084 Latch 25 27

*strikes not available in distressed finishes, non-distressed equalavelents 402=102, 412=112, 452=152

6001.000 Dust Box (included with all Mortise Locks) $4

armored Fronts1.25˝ – standard for 2.5˝ & 2.75˝ backset mortise locks 1˝ – standard for 1.5˝ & 2˝ backset mortise locksRemovable armored fronts protect the lock against tampering of the cylinder yoke assembly. Available in all matching finishes of mortise locks.ORDERING INSTRUCTIONS: Specify part number indicated below and finish required.

6300 series – armorEd Front> For use on 6300 Series Locks (2.5˝ backset only) > 1.25˝ (32mm) wide front and .5˝ (13mm) wide latch bolt

1.25˝ (32mm) 6301.xxx.0004 Latch/Deadbolt/Stops 6310.xxx.0004 Latch/Deadbolt 6318.xxx.0004 Latch

1˝ (25mm) 6301.xxx.0084 Latch/Deadbolt/Stops 6310.xxx.0084 Latch/Deadbolt 6318.xxx.0084 Latch1.25˝1˝

6800 series – armorEd Front> For use on 6800-6802 Series Locks (1.5˝ and 2˝ backset) > 1.25˝ (32mm) wide front and .5˝ (13mm) wide latch bolt

1.25˝ (32mm) 6150.xxx.0004 Deadbolt 6800.xxx.0004 Latch/Deadbolt/Stops 6810.xxx.0004 Latch/Dead Bolt 6855.xxx.0004 Latch

1˝ (25mm) 6150.xxx.0084 Deadbolt 6800.xxx.0084 Latch/Deadbolt/Stops 6810.xxx.0084 Latch/Deadbolt 6855.xxx.0084 Latch

1.25˝1˝

6000 series – armorEd Front> For use on 6000 Series Locks (2.75˝ backset only) > 1.25˝ (32mm) wide front and .625˝ (16mm) wide latch bolt

1.25˝ (32mm) 6010.xxx.0004 Latch/Deadbolt 6021.xxx.0004 Latch/Deadbolt/Stops 6060.xxx.0004 Latch/Auxiliary Latch/Stops 6065.xxx.0004 Latch/Auxiliary Latch 6080.xxx.0004 Latch/Auxiliary Latch/Deadbolt/Stops 6091.xxx.0004 Latch/Auxiliary Latch/Deadbolt 6110.xxx.0004 Latch 6150.xxx.0004 Deadbolt1.25˝

161

cylindErs – lock trim tHicknEss indEx

B - .0937˝ (2.4mm) 6511 - Escutcheon 6540 - San Diego 6543 - Lancaster 6555 - Boston 6556 - Charleston 6557 - Richmond 6563 - Chicago 6564 - Princeton 6565 - Monterey 6568 - Renssalaer

a - .0625˝ (1.5mm) 6755 - Cylinder Collar

6572 - Plymouth 6642 - Escutcheon 6752 - Cylinder Collar 6763 - Escutcheon 6769 - Escutcheon 6774 - Escutcheon 6797 - Escutcheon 6924 - Vancouver 6927 - Montpelier 6931 - Dallas

6940 - Denver 6979 - Escutcheon 6981 - Melbourne

c - .125˝ (3mm) 6541 - San Francisco 6547 - Nashville 6768 - Cylinder Collar 6793 - Escutcheon

6922 - Lakewood 6933 - Versailles 6938 - Mobile 6942 - Bismark 6975 - Escutcheon

6980 - Escutcheon 6986 - Escutcheon 6993 - Escutcheon 6996 - Escutcheon

d - .1875˝ (5mm) 6508 - Escutcheon 6551 - Reading 6552 - Baltimore

6567 - Trenton 6765 - Escutcheon 6767 - Escutcheon

6948 - Victoria 8300 - Cylinder Collar (1/8˝ Adj.)

E - .25˝ (6mm) 6503 - Escutcheon 6504 - Escutcheon 6548 - Detroit 6554 - Barclay 6562 - New York

6571 - Concord 6737 - Cylinder Collar 6794 - Escutcheon 6910 - Midtown 6939 - Bristol Lever Set 6949 - Metropolitan

6991 - Escutcheon 8300 - Cylinder Collar (1/16˝ Adj.)

F - .3125˝ (8mm) 6546 - Wilmington 6549 - Williamsburg (Sgl Cyl) 6550 - Georgetown (Sgl Cyl) 6560 - Lexington 6573 - Springfield

6754 - Cylinder Collar 6757 - Cylinder Collar 6790 - Escutcheon 6795 - Escutcheon 6798 - Escutcheon

6937 - Charlotte

6950 - Kensington 6961 - Westminster 6990 - Escutcheon 8300 - Cylinder Collar (No Adj.)

g - .375˝ (10mm) 6570 - Atlanta 6944 - Pasadena

6738, 6739, 6743 6963 - Bristol Handle Set 6966 - Lakeshore Handleset

6974 - Lakeshore Entrance Set 6976 – Minneapolis

H - .435˝ (11mm) 6952 - Edinburgh 6962 - Fenwick

H1 - .53˝ (12mm) M502 - Cody 3/4 escutcheon M504 - Cody full escutcheon

6973 - Houston Entrance Set 6999 - Richland

M512 - Boulder 3/4 escutcheon M514 - Boulder full escutcheon

M516 - Soho 3/4 escutcheon M522 - Bethpage

i - .5625 ̋(14mm) 6515 - Oval Edinburgh (Mortise) 6520 - Bristol (Mortise)

6516 - Oval Edinburgh (Mortise) 6526 - Kensington (Mortise)

k - .875˝ (22mm) 6505 - Box Escutcheon

(Dbl. Cyl. Only)

6549 - Williamsburg

(Dbl. Cyl. Only) 6550 - Georgetown

(Dbl. Cyl. Only)

J - .75˝ (18mm) 6542 - Tremont 6545 - Empire

6544 - Hamilton 6791 - Escutcheon 6769 - Escutcheon

6935 - Republic 6951 - Stanford

6503 - Escutcheon .25˝ E6504 - Escutcheon .25˝ E6505 - Box Escutcheon .875˝ K6508 - Escutcheon .1875˝ D6511 - Escutcheon .09˝ B6513 - Escutcheon .375˝ G6515 - Oval Edinburgh (Mort) .5625˝ I6516 - Oval Edinburgh (Mort) .5625˝ I6520 - Bristol (Mort) .5625˝ I6526 - Kensington (Mort) .5625˝ I6540 - San Diego .09˝ B6541 - San Francisco .125˝ C6542 - Tremont .75˝ J6543 - Lancaster .09˝ B6544 - Hamilton .75˝ J6545 - Empire .75˝ J6546 - Wilmington .3125˝ F 6547 - Nashville .125˝ C 6548 - Detroit .25˝ E6549 - Williamsburg .3125˝ F 6549 - Williamsburg .875˝ K 6513 - Escutcheon .375˝ G6550 - Georgetown .3125˝ F 6550 - Georgetown .875˝ K 6551 - Reading .1875˝ D 6552 - Baltimore .1875˝ D 6554 - Barclay .25˝ E6555 - Boston .09˝ B6556 - Charleston .09˝ B6557 - Richmond .09˝ B6560 - Lexington .3125˝ F 6562 - New York .25˝ E6563 - Chicago .09˝ B6564 - Princeton .09˝ B6565 - Monterey .09˝ B6567 - Trenton .1875˝ D 6568 - Renssalaer .09˝ B6570 - Atlanta .375˝ G 6571 - Concord .25˝ E6572 - Plymouth .09˝ B6573 - Springfield .3125˝ F 6641 - Pasadena .375˝ G 6642 - Escutcheon .09˝ B6737 - Cylinder Collar .25˝ E6738 - Cylinder Collar .375˝ G6739 - Cylinder Collar .375˝ G6743 - Cylinder Collar .375˝ G6752 - Cylinder Collar .09˝ B6754 - Cylinder Collar .3125˝ F 6755 - Cylinder Collar .625˝ A 6757 - Cylinder Collar .3125˝ F 6763 - Escutcheon .09˝ B6765 - Escutcheon .1875˝ D

6767 - Escutcheon .1875˝ D 6768 - Cylinder Collar .125˝ C 6769 - Escutcheon .09˝ B6769 - Escutcheon .75˝ J 6774 - Escutcheon .09˝ B6790 - Escutcheon .3125˝ F 6791 - Escutcheon .75˝ J 6792 - Escutcheon .75˝ J 6793 - Escutcheon .125˝ C6794 - Escutcheon .25˝ E6795 - Escutcheon .3125˝ F 6797 - Escutcheon .09˝ B6798 - Escutcheon .3125˝ F 6910 - Midtown .25˝ E6922 - Lakewood .125˝ C6924 - Vancouver .09˝ B6927 - Montpelier .09˝ B6931 - Dallas .09˝ B6933 - Versailles .125˝ C6935 - Republic .75˝ J 6937 - Charlotte .3125˝ F 6938 - Mobile .125˝ C6939 - Bristol Lever Set .25˝ E6940 - Denver .09˝ B6942 - Bismark .125˝ C6944 - Pasadena .435˝ G 6948 - Victoria .1875˝ D 6949 - Metropolitan .25˝ E6950 - Kensington .3125˝ F 6951 - Stanford .75˝ J 6952 - Edinburgh .435˝ H 6961 - Westminster .3125˝ F 6962 - Fenwick .435˝ H 6963 - Bristol Handle Set .375˝ G 6966 - Lakeshore Handleset .375˝ G 6973 - Houston Entrance Set .435˝ H 6974 - Lakeshore Entrance .375˝ G 6975 - Escutcheon .125˝ C 6976 – Minneapolis .375˝ G6979 - Escutcheon .09˝ B6980 - Escutcheon .125˝ C 6986 - Escutcheon .125˝ C 6988 - Escutcheon .09˝ B6990 - Escutcheon .3125˝ F 6991 - Escutcheon .25˝ E6993 - Escutcheon .125˝ C 6996 - Escutcheon .125˝ C 6999 - Richland .435˝ H 8300 - Cylinder Collar .1875˝ D 8300 - Cylinder Collar .25˝ E8300 - Cylinder Collar .3125˝ F M502 - Cody 3/4 escutcheon .54˝ H1M504 - Cody full escutcheon .54˝ H1M512 - Boulder 3/4 escutcheon .54˝ H1M514 - Boulder full escutcheon .54˝ H1M516 - Soho 3/4 escutcheon .54˝ H1M522 - Bethpage .54˝ H1

Fraction dEcimal1/16˝ .0625˝1/8˝ .125˝3/16˝ .1875˝1/4˝ .25˝5/16˝ .3125˝3/8˝ .375˝7/16˝ .4375˝1/2˝ .5˝9/16˝ .5625˝5/8˝ .625˝11/16˝ .6875˝3/4˝ .75˝13/16˝ .8125˝7/8˝ .875˝

dEcimal Fraction cHart

161

1˝8321.xxx.DBL

1˝8321.xxx.DBL

1˝8321.xxx.DBL

1˝8321.xxx.DBL

1˝8321.xxx.DBL

1˝8321.xxx.DBL

1˝8321.xxx.DBL

1.125˝8322.xxx.DBL

1.125˝8322.xxx.DBL

1.5˝8325.xxx.DBL

1˝8321.xxx

1.5˝8325.xxx

.2812˝+8440.xxx.7

.25˝+8440.xxx.6

.2187˝+8440.xxx.6

.1526˝+8440.xxx.4

.1875˝8440.xxx.5

.0625˝8440.xxx.1

—

.0625˝

8440.xxx.1

.0937˝+8440.xxx.2

.0937˝+8440.xxx.2

—

—

a – .0625˝

B – .0937˝

c – .125˝

d – .1875˝

E – .25˝

F – .3125˝

g – .375˝

H – .435˝

i – .5625˝

J – .75˝

F – Exterior .3125˝

k – interior .875˝

1˝8321.xxx.DBL

1˝8321.xxx.DBL

1˝8321.xxx.DBL

1.125˝8322.xxx.DBL

1.125˝8322.xxx.DBL

1.25˝8323.xxx.DBL

1.25˝8323.xxx.DBL

1.25˝8323.xxx.DBL

1.5˝8325.xxx.DBL

1.625˝8326.xxx.DBL

1.125˝8322.xxx

1.75˝8327.xxx

.1875˝8440.xxx.5

.125˝8440.xxx.3

.0625˝8440.xxx.1

.093˝+8440.xxx.2

.0625˝8440.xxx.1

.093˝+8440.xxx.2

.0625˝8440.xxx.1

—

.0625˝8440.xxx.1

.0625˝8440.xxx.1

—

—

1˝8321.xxx.DBL

1.125˝8322.xxx.DBL

1.125˝8322.xxx.DBL

1.125˝8322.xxx.DBL

1.25˝8323.xxx.DBL

1.25˝8323.xxx.DBL

1.375˝8324.xxx.DBL

1.5˝8325.xxx.DBL

1.5˝8325.xxx.DBL

1.75˝8327.xxx.DBL

1.25˝8323.xxx

2˝8328.xxx

—

.0625˝8440.xxx.1

.0625˝8440.xxx.1

—

.0625˝8440.xxx.1

—

.0625˝8440.xxx.1

.0625˝+8440.xxx.1

.0625˝8440.xxx.1

.0625˝8440.xxx.1

—

.125˝8440.xxx.3

1.125˝8322.xxx.DBL

1.25˝8323.xxx.DBL

1.25˝8323.xxx.DBL

1.25˝8323.xxx.DBL

1.375˝8324.xxx.DBL

1.375˝8324.xxx.DBL

1.5˝8325.xxx.DBL

1.5˝8325.xxx.DBL

1.625˝8326.xxx.DBL

2˝8328.xxx.DBL

1.375˝8324.xxx

2˝8328.xxx

—

0625˝8440.xxx.1

.0625˝8440.xxx.1

—

.0625˝

8440.xxx.1

—

.0625˝

8440.xxx.1

—

.156˝+

8440.xxx.4

.156˝+8440.xxx.4

—

—

1.25˝8323.xxx.DBL

1.375˝8324.xxx.DBL

1.375˝8324.xxx.DBL

1.375˝8324.xxx.DBL

1.5˝8325.xxx.DBL

1.5˝8325.xxx.DBL

1.625˝8326.xxx.DBL

1.625˝8326.xxx.DBL

2˝8328.xxx.DBL

2˝8328.xxx.DBL

1.5˝8325.xxx

2.25˝8329.xxx

—

0625˝8440.xxx.1

.0625˝8440.xxx.1

—

.0625˝

8440.xxx.1

—

.0625˝

8440.xxx.1

—

.0625˝

8440.xxx.1

.0625˝8440.xxx.1

—

.125˝8440.xxx.3

a – .0625˝

B – .0937˝

c – .125˝

d – .1875˝

E – .25˝

F – .3125˝

g – .375˝

H – .435˝

H1 – .53˝

i – .5625˝

J– .75˝

cylindErs – c kEyway taBlE

1˝8321.xxx

1˝8321.xxx

1˝8321.xxx

1˝8321.xxx

1˝8321.xxx

1.125˝8322.xxx

1.125˝8322.xxx

1.125˝8322.xxx

1.125˝8322.xxx

1.125˝8322.xxx

1.5˝8325.xxx

.1875˝8440.xxx.5

.1562˝8440.xxx.4

.125˝8440.xxx.3

—

—

—

—

—

—

—

—

singlE cylindEr – c kEyway 1.375˝ 1.75˝ 2˝ 2.25˝ 2.5˝

lock trim thickness

cylinder length

Blocking ring

1˝8321.xxx

1˝8321.xxx

1.125˝8322.xxx

1.125˝8322.xxx

1.25˝8323.xxx

1.25˝8323.xxx

1.25˝8323.xxx

1.375˝8324.xxx

1.5˝8325.xxx

1.5˝8325.xxx

1.625˝8326.xxx

—

—

—

—

—

—

—

—

—

—

—

cylinder length

Blocking ring

1.125˝8322.xxx

1.125˝8322.xxx

1.125˝8322.xxx

1.25˝8323.xxx

1.25˝8323.xxx

1.375˝8324.xxx

1.375˝8324.xxx

1.5˝8325.xxx

1.625˝8326.xxx

1.625˝8326.xxx

1.75˝8327.xxx

—

—

—

—

—

—

—

—

—

—

—

cylinder length

Blocking ring

1.25˝8323.xxx

1.25˝8323.xxx

1.25˝8323.xxx

1.375˝8324.xxx

1.375˝8324.xxx

1.5˝8325.xxx

1.5˝8325.xxx

1.625˝8326.xxx

1.75˝8327.xxx

1.75˝8327.xxx

2˝8328.xxx

—

—

—

—

—

—

—

—

—

—

.125˝8440.xxx.3

cylinder length

Blocking ring

1.375˝8324.xxx

1.375˝8324.xxx

1.375˝8324.xxx

1.5˝8325.xxx

1.5˝8325.xxx

1.625˝8326.xxx

1.625˝8326.xxx

1.75˝8327.xxx

2˝8328.xxx

2˝8328.xxx

2˝8328.xxx

—

—

—

—

—

—

—

—

—

—

—

cylinder length

Blocking ring

doorthickness:

030, 031, 033 038, 040, 050 060, 102, 112 003 150, 151, 152 055Item # Description 190, 260, 264 0568321.xxx 1˝ Mortise Cyl.8322.xxx 1.125˝ Mortise Cyl.8323.xxx 1.25˝ Mortise Cyl. $43 468324.xxx 1.375˝ Mortise Cyl.8325.xxx 1.5˝ Mortise Cyl.8326.xxx 1.625˝ Mortise Cyl.8327.xxx 1.75˝ Mortise Cyl.8328.xxx 2˝ Mortise Cyl. $103 1088329.xxx 2.25˝ Mortise Cyl.8330.xxx 2.5˝ Mortise Cyl.

Cylinders NOT available in Distressed finishes, non-distressed equalavelents 402=102, 412=112, 452=152

notE: When ordering cylinders for g-sEriEs mortisE locks, use this chart, but add a suffix ‘.EMHT’ to the end of the Item #.(same price as standard C keyway cylinders)ExamplE: Lifetime Polished Brass 1.25˝ cylinder for G-series mortise

8323.003.EMHT

singlE cylindEr

Blocking rings

douBlE cylindEr 030, 031, 033 038, 040, 050 060, 102, 112 003 150, 151, 152 055Item # Description 190, 260, 264 0568321.xxx.DBL 1˝ Double Cyl.8322.xxx.DBL 1.125˝ Double Cyl.8323.xxx.DBL 1.25˝ Double Cyl. $88 928324.xxx.DBL 1.375˝ Double Cyl.8325.xxx.DBL 1.5˝ Double Cyl.8326.xxx.DBL 1.625˝ Mortise Cyl.8327.xxx.DBL 1.75˝ Mortise Cyl.8328.xxx.DBL 2˝ Mortise Cyl. $206 2158329.xxx.DBL 2.25˝ Mortise Cyl.8330.xxx.DBL 2.5˝ Mortise Cyl.

Cylinders NOT available in Distressed finishes, non-distressed equalavelents 402=102, 412=112, 452=152

030, 031, 033 038, 040, 050 060, 102, 112 003 150, 151, 152 055Item # Description 190, 260, 264 0568440.xxx.001 .0625˝ – 1/16˝ B.R. 8440.xxx.002 .0937˝ – 3/32˝ B.R. 8440.xxx.003 .125˝ – 1/8˝ B.R. $11 148440.xxx.004 .1562˝ – 5/32˝ B.R. 8440.xxx.005 .1875˝ – 3/16˝ B.R. 8440.xxx.006 .25˝ – 1/4˝ B.R.

+Two Blocking Rings Required

douBlE cylindEr – c kEyway 1.375˝ 1.75˝ 2˝ 2.25˝ 2.5˝

lock trim thickness

cylinder length

Blocking ring

cylinder length

Blocking ring

cylinder length

Blocking ring

cylinder length

Blocking ring

cylinder length

Blocking ring

doorthickness:

163

8300.509.std – standard cam Thickness: .0625˝ (2mm)For use with most manufacturers of Mortise type locks.

8300.509.ar – adams ritE cam Thickness: .0625˝ (2mm)For Adams Rite Series 1800, 4093, 4500.

8300.509.EmHt – EmHart camThickness: .0625˝ (2mm)For use with Emhart Mortise type locks.

tailpiEcE Bars For rim cylindErs Horizontal8313.329.TPH1 – 2.2188˝ (56mm)8313.329.TPH2 – 3.1875˝ (81mm)

8440 sEriEs – mortisE lock turn piEcE cylindErsFeatures: Used for specific conditions when operation by turn piece is required in place of a key. Available only with 6720 T-knob attached. Not handed.

cylindErs – accEssoriEs

Item # Function Finish Price

cams for mortise cylinders8300.009.0065 5-pin Cylinder Spring Covers 009 $248300.009.0066 6-pin Cylinder Spring Covers 009 238300.109.005 Cylinder Springs 109 248300.509.AR Adams Rite Cam 009 248300.509.EMHT Emhart Cam 009 58300.509.STD Standard Cam 009 58313.329.TPH1 Rim Cylinder Tailpiece – 2.2188˝ (56mm) 58313.329.TPH2 Rim Cylinder Tailpiece – 3.1875˝ (81mm) 6

residential trim marking template

8498.000 Residential trim marking template – 2.75˝ doors $52

030, 031, 033, 034turn piece cylinders 038, 040, 050 060, 102, 112 150, 151, 152 003, 055Item # Description 190, 260, 264 0568441.xxx 1˝ Turn Knob Cylinder8442.xxx 1.125˝ Turn Knob Cylinder $100 1058443.xxx 1.25˝ Turn Knob Cylinder8444.xxx 1.625˝ Turn Knob Cylinder

8498.000 – rEsidEntial trim marking tEmplatE

Features: To eliminate face drilling errors with Residential Trim shown in this section, Baldwin offers an economical metal template to ensure precision hole alignment. The template is designed to easily slide over a 1.75˝ (44mm) door and engages into the mortise cutout. The hole positions mark the center of the specific bore locations. Before marking hole positions, ALWAYS check to verify that metal template is square to mortise cutout. Mark hole locations accordingly and remove template.

163

6737.xxx – square collar2.5˝ × 2.5˝ x .25˝ projection – E(64 × 64mm)

6738, 6738s*.xxx – round collar1.75˝ dia. x .375˝ projection – G

cylindErs – cylindEr trim 030, 031, 033, 034 038, 040, 050 060, 102, 112 003, 055 150, 151, 190 056, 402Item # Description 260, 264 412, 4526737.xxx Square Cylinder Collar 6738.xxx Contemporary Round Collar 6738S.xxx* Contemporary Round Stainless*6739.xxx Lakeshore Cylindar Collar 6743.xxx Contemporary Square Collar6743S.xxx* Contemporary Square Stainless* $41 466752.xxx Cylindar Collar6754.xxx Oval Cylindar Collar6757.xxx Colonial Cylindar Collar6761.xxx Dummy Cylindar 6768.xxx Beaded Cylindar Collar

6755.xxx Cylindar Lock Cover Plate 85 986755.xxx.001 1/16˝ Blocking Ring – 6755 only (040 finish only) 86755.xxx.002 3/32˝ Blocking Ring – 6755 only (040 finish only) 86755.xxx.003 1/8˝ Blocking Ring – 6755 only (040 finish only) 88300.xxx Compression Cylinder Collar** 15 18*8314.xxx Wrought Cylinder Collar 12 14

*Stainless Steel collars available in 102, 112, 151, 320 & 324**8314 Wrought Cylinder Collar NOT available in Distressed finishes

notE: Cylinder collars are only for mortise cylinders and will not work on tubular deadbolts.

6739.xxx – lakeshore collar1.9˝ x 1.9˝ x .375˝ projection – G

6743, 6743s*.xxx – contenporary square2.0˝ x 2.0˝ x .375˝ projection – G

6752.xxx2.065˝ × 3.545˝ x .09˝ projection – B(52 × 90mm)

6754.xxx1.687˝ × 3˝ x .3125˝ projection – F(43 × 76mm)

6757.xxx1.75˝(44mm) dia.

6761.xxx – dummy cylinderFor use with escutcheons and sectional trim for symmetrical appearance on pairs of doors.

8314.xxx – standard rim cylinder collarDiameter: 1.945˝ (49mm)Thickness: .030 (.8mm)Adjustment Range: None

8300.xxx – compression cylinder collarDiameter:

6768.xxx1.75˝(44mm) dia.

6755.xxx1.625˝ × 2.375˝ x .3125˝ projection – A(41 × 60mm)NOTE: Prepared to fitBaldwin mortise or trim cylinders only.

cylindEr not includEd









165

mortisE lock cylindErs

Length of Mortise Cylinders: The length of a Baldwin cylinder is the measurement from the back edge of the cylinder cap to the outer surface of the cam as illustrated.

item number cylinder c(03) keyway E(05) keyway F(06) keyway length

8321 8341 8361 1˝ (25mm)

8322 8342 8362 1.125˝ (29mm)

8323 8343 8363 1.25˝ (32mm)

8324 8344 8364 1.375˝ (35mm)

8325 8345 8365 1.5˝ (38mm)

8326 — — 1.625˝ (41mm)

8327 — — 1.75˝ (44mm)

8328 — — 2˝ (51mm)

8329 — — 2.25˝ (57mm)

8330 — — 2.5˝ (64mm)

Features: Baldwin 6 pin (5 pin for 1˝ [25mm]) precision mortise cylinders are made of solid extruded brass. Finish is applied to cap only. When ordered separately, cylinders are supplied with 2 nickel silver keys. Cam 8300.509.STD is furnished. Cams illustrated on page K/10 can be ordered at additional charge. Cylinder lengths greater than 1.5˝ (38mm) are not available for E(05) and F(06) keyway Cylinders.Keying Requirements: Available in a multitude of keying arrangements including Master, Grand Master and Construction Keying Levels.Ordering Instructions: Standard Mortise Cylinder: Specify item number and finish.

Hotel Mortise Cylinder: Specify item number, finish with suffix “H”. Cylinder price includes all MK charges and standard key bow. Cylinder is available with 6 pin keying only.

1

5

3 2

8

7

6

4

cylindErs – mortisE cylindEr spEciFications

No. 1 – 8320.xxx.003 – Series cylinder plug. Specify length required and either US4 or 26D finish.

No. 2 – 8300.509.STD – Cylinder Cam StandardNo. 3 – 8300.509.004 – Mounting Screws for camNo. 4 – 8300.109.005 – Tumbler SpringsNo. 5 – 8300.009.0065 – Spring Covers (5 pin) 8300.009.0066 – Spring Covers (6 pin)No. 6 – 8320.009.101 – Top Pins (For Bottom Pins #0–#3) 8320.009.102 – Top Pins (For Bottom Pins #4–#6) 8320.009.103 – Top Pins (For Bottom Pins #7–#9)No. 7 – 8320.009.202 #2 Master Pins - .0295″ (0.749mm) 8320.009.203 #3 Master Pins - .0445″ (1.130mm) 8320.009.204 #4 Master Pins - .0595″ (1.511mm) 8320.009.205 #5 Master Pins -.0745″ (1.892mm) 8320.009.206 #6 Master Pins - .0895″ (2.273mm) 8320.009.207 #7 Master Pins - .1045″ (2.654mm) 8320.009.208 #8 Master Pins - .1195″ (3.035mm) 8320.009.209 #9 Master Pins - .1345″ (3.416mm)

No. 8 – 8320.152.300 #0 Bottom Pins - .1655″ (4.204mm) 8320.152.301 #1 Bottom Pins - .1805″ (4.585mm) 8320.152.302 #2 Bottom Pins - .1955″ (4.966mm) 8320.152.303 #3 Bottom Pins - .2105″ (5.347mm) 8320.152.304 #4 Bottom Pins - .2255″ (5.728mm)

8320.152.305 #5 Bottom Pins - .2405″ (6.109mm) 8320.152.306 #6 Bottom Pins - .2555″ (6.489mm) 8320.152.307 #7 Bottom Pins - .2705″ (6.871mm) 8320.152.308 #8 Bottom Pins - .2855″ (7.252mm) 8320.152.309 #9 Bottom Pins - .3005″ (7.633mm)

165

rim lock cylinders

Features: Baldwin 6 pin precision Rim Cylinders are made of solid extruded brass. Finish is applied to cap only. When ordered separately, Cylinders are supplied with 2 nickel silver keys. Tailpiece 8313.329.TPH1 is furnished. C(03) Keyway Cylinders are furnished standard with rim locks unless otherwise specified. Consult price list.Keying Requirements: Available in a multitude of keying arrangements including Master, Grand Master and Construction Keying Levels.Cylinder Collar: Cylinder Collars are furnished standard with all keyed rim locks. Cylinder collars shown on page K/11 may be furnished at an additional charge.Ordering Instructions: Standard Rim Cylinder: Specify item number and finish.Weight Each: .3 lb. (.14kg)

8333 – C(03) Keyway

312 11 1092 1

8

7

6

45

cylindErs – rim cylindErs, For Baldwin rim locks

030, 031, 033, 034rim cylinders 038, 040, 050 060, 102, 112 003 150, 151, 190 055Item # Function Keyway 260, 264 0568333.xxx Rim Cylinder C $66 718333.xxx.H Rim Cylinder C 93 98

tailpiece Bars for rim cylinders8313.329.TPH1 Rim cylinder tailpiece (regular – 2.22˝) (329 finish only) $58313.329.TPH2 Rim cylinder tailpiece (long – 3.1875˝) (329 finish only) 6

No. 1 – 8333.xxx.003 – Cylinder plug. Specify either US4 or 26D finish.

No. 2 – 8333.009.007 – Tailpiece PlateNo. 3 – 8300.509.004 – Mounting Screws for TailpieceNo. 4 – 8300.109.005 – Tumbler SpringsNo. 5 – 8300.009.0066 – Spring Covers (6 pin)No. 6 – 8320.009.101 – Top Pins (For Bottom Pins #0–#3) 8320.009.102 – Top Pins (For Bottom Pins #4–#6) 8320.009.103 – Top Pins (For Bottom Pins #7–#9)No. 7 – 8320.009.202 #2 Master Pins - .0295″ (0.749mm) 8320.009.203 #3 Master Pins - .0445″ (1.130mm) 8320.009.204 #4 Master Pins - .0595″ (1.511mm) 8320.009.205 #5 Master Pins - .0745″ (1.892mm) 8320.009.206 #6 Master Pins - .0895″ (2.273mm) 8320.009.207 #7 Master Pins - .1045″ (2.654mm) 8320.009.208 #8 Master Pins - .1195″ (3.035mm) 8320.009.209 #9 Master Pins - .1345″ (3.416mm)No. 8 – 8320.152.300 #0 Bottom Pins - .1655″ (4.204mm) 8320.152.301 #1 Bottom Pins - .1805″ (4.585mm) 8320.152.302 #2 Bottom Pins - .1955″ (4.966mm) 8320.152.303 #3 Bottom Pins - .2105″ (5.347mm) 8320.152.304 #4 Bottom Pins - .2255″ (5.728mm) 8320.152.305 #5 Bottom Pins - .2405″ (6.109mm)Cont. 8320.152.306 #6 Bottom Pins - .2555″ (6.489mm) 8320.152.307 #7 Bottom Pins - .2705″ (6.871mm) 8320.152.308 #8 Bottom Pins - .2855″ (7.252mm) 8320.152.309 #9 Bottom Pins - .3005″ (7.633mm)No. 9 – 8333.009.010 SpacerNo. 10 – 8313.329.TPH1 Tailpiece – Horizontal (Regular)

8313.329.TPH2 Tailpiece – Horizontal (Long)No. 11 – 8313.509.008 Mounting Plate

No. 12 – 8313.509.009 Mounting Screws

167

cylindErs – kEy Blanks

Key Blanks

K 8335.152 5-pin standard key blank, C (03) keyway, 50/box 152 $2 K 8335.152.CK Construction key 152 7 K 8335.152.CUTK Cut keys ordered separately 152 10 K 8335.152.DK Display keys 152 21 K 8335.152.EK Emergency keys 152 21 K 8335.152.GGGM Great great grand master keys 152 21 K 8335.152.GGMK Great grand master keys 152 21 K 8335.152.GMK Grand master keys 152 21 K 8335.152.MK Master keys 152 21 K 8335.152.SKD Single keyed different 152 21 K 8335.152.SOK Shut out keys 152 21

K 8336.152 6-pin key blank, C (03) keyway, 50/box 152 2 K 8336.152.CK Construction key 152 7 K 8336.152.CUTK Cut keys ordered separately 152 10 K 8336.152.DK Display keys 152 21 K 8336.152.EK Emergency keys 152 21 K 8336.152.GGGM Great great grand master keys 152 21 K 8336.152.GGMK Great grand master keys 152 21 K 8336.152.GMK Grand master keys 152 21 K 8336.152.MK Master keys 152 21 K 8336.152.SKD Single keyed different 152 21 K 8336.152.SOK Shut out keys 152 21

K 8337.152 6-pin hotel large bow (2˝) key blank C (03) keyway 152 9 K 8337.152.CK Construction key 152 7 K 8337.152.CUTK Cut keys ordered separately 152 10 K 8337.152.DK Display keys 152 21 K 8337.152.EK Emergency keys 152 21 K 8337.152.GGGM Great great grand master keys 152 21 K 8337.152.GGMK Great grand master keys 152 21 K 8337.152.GMK Grand master keys 152 21 K 8337.152.HOTL Hotel key bow 152 8 K 8337.152.MK Master keys 152 21 K 8337.152.SKD Single keyed different 152 21 K 8337.152.SOK Shut out keys 152 21

K 8355.152 5-pin standard key blank, E (05) keyway, 50/box 152 4 K 8355.152.CK Construction key 152 7 K 8355.152.CUTK Cut keys ordered separately 152 10 K 8355.152.DK Display keys 152 21 K 8355.152.EK Emergency keys 152 21 K 8355.152.GGGM Great great grand master keys 152 21 K 8355.152.GGMK Great grand master keys 152 21 K 8355.152.GMK Grand master keys 152 21 K 8355.152.MK Master keys 152 21 K 8355.152.SKD Single keyed different 152 21 K 8355.152.SOK Shut out keys 152 21

K 8356.152 6-pin key blank, E (05) keyway, 50/box 152 4 K 8356.152.CK Construction key 152 7 K 8356.152.CUTK Cut keys ordered separately 152 10 K 8356.152.DK Display keys 152 21 K 8356.152.EK Emergency keys 152 21 K 8356.152.GGGM Great great grand master keys 152 21 K 8356.152.GGMK Great grand master keys 152 21 K 8356.152.GMK Grand master keys 152 21 K 8356.152.MK Master keys 152 21 K 8356.152.SKD Single keyed different 152 21 K 8356.152.SOK Shut out keys 152 21

K 8357.152 6-pin hotel large bow (2˝) key blank E (05) keyway 152 9 K 8357.152.CK Construction key 152 7 K 8357.152.CUTK Cut keys ordered separately 152 10 K 8357.152.DK Display keys 152 21 K 8357.152.EK Emergency keys 152 21 K 8357.152.GGGM Great great grand master keys 152 21 K 8357.152.GGMK Great grand master keys 152 21 K 8357.152.GMK Grand master keys 152 21 K 8357.152.HOTL Hotel key bow 152 8 K 8357.152.MK Master keys 152 21 K 8357.152.SKD Single keyed different 152 21 K 8357.152.SOK Shut out keys 152 21

K 8375.152 5-pin key blank, E (06) keyway, 50/box 152 4 K 8375.152.CK Construction key 152 7 K 8375.152.CUTK Cut keys ordered separately 152 10 K 8375.152.DK Display keys 152 21 K 8375.152.EK Emergency keys 152 21 K 8375.152.GGGM Great great grand master keys 152 21 K 8375.152.GGMK Great grand master keys 152 21 K 8375.152.GMK Grand master keys 152 21 K 8375.152.MK Master keys 152 21 K 8375.152.SKD Single keyed different 152 21 K 8375.152.SOK Shut out keys 152 21

K 8376.152 6-pin key blank, F (06) keyway, 50/box 152 4 K 8376.152.CK Construction key 152 7 K 8376.152.CUTK Cut keys ordered separately 152 10 K 8376.152.DK Display keys 152 21 K 8376.152.EK Emergency keys 152 21 K 8376.152.GGGM Great great grand master keys 152 21 K 8376.152.GGMK Great grand master keys 152 21 K 8376.152.GMK Grand master keys 152 21 K 8376.152.MK Master keys 152 21 K 8376.152.SKD Single keyed different 152 21 K 8376.152.SOK Shut out keys 152 21

K 8377.152 6-pin hotel large bow (2˝) key blank F (06) keyway 152 9 K 8377.152.CK Construction key 152 7 K 8377.152.CUTK Cut keys ordered separately 152 10 K 8377.152.DK Display keys 152 21 K 8377.152.EK Emergency keys 152 21 K 8377.152.GGGM Great great grand master keys 152 21 K 8377.152.GGMK Great grand master keys 152 21 K 8377.152.GMK Grand master keys 152 21 K 8377.152.HOTL Hotel key bow 152 8 K 8377.152.MK Master keys 152 21 K 8377.152.SKD Single keyed different 152 21 K 8377.152.SOK Shut out keys 152 21

K 8401.152 Issued under factory authorization only. 152 5 Not available for normal sale K 8406.152 Issued under factory authorization only. 152 5 Not available for normal sale K 8416.152 Issued under factory authorization only. 152 5 Not available for normal sale

‡ 8053.040.0002 Construction key cylinder plug 040 4 8053.264.002 264 4

*Per cylinder master keying charge 000 18 *Per cylinder construction keying charge 000 18

*NOTE: 2 Keys provided per cylinder.

*NOTE: 152 finish in cylinders, locks, and latches is Antique Nickel with matte lacquer. This coordinates with lock trim in 452 finish.

167

misc – rEplacEmEnt parts

1A 8490.000.001 .25-20 × 3˝ FH PH MS Door knocker/hand set/thru-bolt 10 ea $9 1B 8490.000.002 No. 10-24 × 3˝ OH PH MS × 260 Extra long trim thru-bolts 10 ea 10 1C 8490.000.003 No. 10-24 × 3˝ OH PH MS × 030 Extra long trim thru-bolts 10 ea 10

2A 8490.000.004 No. 10 × 1˝ FH PH UC WS × 030 Hinge screws 100 ea 34 2B 8490.000.005 No. 12 × 1.25˝ FH PH UC WS × 030 Hinge screws 100 ea 39

3A 8490.000.006 No. 10-24 × .5˝ FH PH MS × 030 Hinge screws 100 ea 40 3B 8490.000.007 No. 12-24 × .5˝ FH PH MS × 030 Hinge screws 100 ea 27

4B 8490.00.010 No. 6 × .625˝ OH PH SMS × 040 Kick plate screws 200 ea 45 4C 8490.00.011 No. 6 × .625˝ OH PH SMS × 264 Kick plate screws 200 ea 45

5A 8490.00.012 No. 8-32 × 1˝ TR SL MS Cabinet knob screws 25 ea 5 5B 8490.000.013 No. 8-32 × 1.625˝ TR SL MS Cabinet knob screws 25 ea 5 5C 8490.000.014 No. 8-32 × 2˝ TR SL MS Cabinet knob screws 25 ea 5

6A 8490.000.015 No. 10-24 × 1˝ TR SL MS Cabinet knob screws 25 ea 6 6B 8490.000.016 No. 10-24 × 1.75˝ TR SL MS Cabinet knob screws 25 ea 18

7A 8490.000.017 No. .25-20 × 1.25˝ TR SL MS Cabinet knob screws 25 ea 6 7B 8490.000.018 No. .25-20 × 1.75˝ TR PH MS Cabinet knob screws 25 ea 14

8A 8490.000.019 No. 8-32 Combination WS/MS Bread board screws for cabinet knobs 25 ea 45 8B 8490.000.020 No. 6-32 × .375˝ OH SL MS Switch plate screws 50 ea 16 8D 8490.000.022 No. 8 × .75˝ FH PH WS Latch/strike/DM backplate screws 50 ea 15 8E 8490.000.023 No. 8 × .375˝ FH PH SMS Screws for No. 5097 backplate 100 ea 20

9A 8490.000.024 No. 12 × 1˝ FH PH Comb. Mortise lock screws 50 ea 12 9B 8490.000.025 No. 4 × .75˝ RD SL WS × 040 Lock trim/house number screws 50 ea 12 9C 8490.000.026 No. 5 × .625˝ FH SL WS × 040 Lock trim screws 50 ea 28

10A 8490.000.027 No. 6 × .5˝ OH SL WS × 040 Lock trim screws 100 ea 29 10B 8490.000.028 No. 8 × .875˝ OH PH WS × 040 Lock trim screws 100 ea 26 10C 8490.000.029 No. 10 × 2˝ OH SL WS × 030 Lock trim screws 20 ea 24

11C 8490.000.032 No. 8-32 × .218˝ FH PH UC MS × 030 Armored front screws 20 ea 5 11D 8490.000.033 No. 3-32 × .218˝ FH PH UC MS × 260 Armored front screws 20 ea 5 11E 8490.000.034 No. 8-32 × .218˝ FH PH UC MS × 102 Armored front screws 20 ea 5

12A 8490.000.035 No. 10-24 × 2.125˝ OH PH MS × 030 Trim thru-bolts 20 ea 8 12B 8490.000.036 No. 10-24 × 2./125˝ OH PH MS × 264 Trim thru-bolts 20 ea 8

13A 8490.000.037 No. .25-20 UNC × .25˝ Socket set screws #0561 200 ea 76

14A 8490.000.038 No. 8-32 × .5˝ FH PH MS Installation plate screws 100 ea 34 14B 8490.000.039 No. 6-32 × .25˝ PAN SL MS Lock front beveling screws 20 ea 5 14C 8490.000.040 No. 8-32 × .25˝ FH PH U/C MS Lock lid screws 20 ea 5

15A 8490.000.041 Complete yoke assembly For 2.75˝ backset locks 2 ea 12 15B 8490.000.042 Complete yoke assembly For 2.5˝ backset locks 2 ea 12

16A 8490.000.043 Stop ball For all mortise locks 10 ea 5 16B 8490.000.044 Stop spring For all mortise locks 10 ea 5

17A 8490.000.045 Turn hub spring For 2.75˝ backset mortise locks 5 ea 5

18A 8490.000.047 Latch spring For 2.75˝ backset locks 5 ea 5 18B 8490.000.048 Lift lever spring For 2.75˝ backset handleset functions 5 ea 5

19A 8490.000.049 Anti-friction hinge pin All locks with anti-friction latch 10 ea 3 19B 8490.000.050 Wear washer For 2.5˝ & 2.75˝ B.S. emergency egress locks 10 ea 3

20A 8490.000.051 Turn hub spring For 2.5˝ backset locks 5 ea 5 20B 8490.000.052 Hub lever spring For 2.5˝ backset locks 5 ea 5

21A 8490.000.053 Lift lever spring For 2.5˝ backset handleset functions 5 ea 5 21B 8490.000.054 Latch spring For 2.5˝ backset locks 5 ea 5

22A 8490.000.055 Turn hub spring For 1.5˝ & 2.0˝ backset locks 5 ea 5 22B 8490.000.056 Hub lever spring For 1.5˝ & 2.0 backset locks 5 ea 5

23A 8490.000.057 Lift lever spring (Lock hub spring) For 1.5˝ & 2.0˝ backset locks 5 ea 5 23B 8490.000.058 Latch spring For 1.5˝ & 2.0˝ backset locks 5 ea 5

24A 8490.000.059 Turn hub spring washer For 1.5˝ & 2.0˝ backset locks 5 ea 3 24B 8490.000.060 Cylinder yoke For 1.5˝ & 2.0˝ backset locks 2 ea 5

25A 8490.000.061 Cylinder set screw For 1.5˝ backset locks 2 ea 3 25B 8490.000.062 Cylinder set screw For 2.0˝ backset locks 2 ea 5

169

8105, 8106, & 8107.xxx right Hand or left Hand, 7 or 8 ft. units.

solid ForgEd Brass construction

CASE SIZE: 1.75˝ × 6.25˝ (44 × 159mm)

BOLT DIMENSIONS: STANDARD 7 FT. LENGTH Top Rod: .625˝ × 40.875˝ (16 mm × 1.04m). Bottom Rod: .625˝ × 38.875˝ (16 × .99 m)

STANDARD 8 FT. LENGTH Top Rod: .625˝ × 52.875˝ (16mm × 1.34) Bottom Rod: .625˝ × 38.875˝ (16mm × .99m)

THROW: When engaged: both bolts extend .75˝ (19mm) into jamb and sill.

GUIDES: 1.5˝ (38mm) wide. Decorative covers to conceal guides are available at an additional charge. Please consult price list.

FASTENERS: Case is surface mounted with 4 No. 8 × 1.25˝ Oval Phillips Head Screws for added strength and durability.

STRIKES: Furnished with 3 Strikes, one Universal, one Angle, and one Mortise to meet various door conditions.

SPINDLE: 1.375˝ (35mm) in length. (N0. 81054) A straight spindle must be ordered when trim is ordered for the exterior side of the door.

FEATURES: Often used as an elegant and functional addition to a pair of french doors with very narrow stile conditions. A typical application requires active cremone bolts mounted on each leaf of a pair of doors with no exterior access.Specify cremone bolt less knob (LK) or less lever (LL), and order knob or lever minus rose (MR) of choice as a separate item.

SPECIAL CONDITIONS: When specified, most trim as illustrated in Section F is available for the exterior side to latch door. Indicate knob or lever to be furnished. Straight spindle must be purchased separately. In addition, for doors larger than 8ft. see Cremone Bolt extension packets below.

PACKED: One in a box with three strikes and the appropriate fasteners. Cremone Bolts are available in two sizes, one for doors up to and including 7 ft. (2.13m) and one for doors between 7 feet and 8 feet in height, at an additional cost. A 42˝ centerline above the finished floor is considered standard with our Cremone Bolts.

NOTE: Always specify hand of door as Knob/Lever trim will turn only in one direction. See diagram on pg. J/10 for handling details. To enable greater job site flexibility, exact sizing of Cremone Bolts can be accomplished in the field. For doors larger than 8ft. in height, the addition of a Cremone Bolt extension packet is necessary. See table below.

ORDERING INFORMATION: The final suffix numbers will indicate the following: Digit #1 of the suffix will indicate hand of the unit: either right (R) or left (L) Digit #2 of the suffix will indicate length: either 7’ or 8’ Digits #3 & #4 of the suffix will indicate a cremone bolt less knob (LK) or lever (LL).

ORDERING ExAMPLES, KNOB/FUNCTION: Order cremone bolt and separate line item for knob: 8105.xxx.R7LK: Standard design 7’ Cremone bolt right hand less knob 5000.xxx.IMR: 1 each 5000 knob minus rose

ORDERING ExAMPLES, LEVER/FUNCTION: Order cremone bolt and separate line item for lever: 8105.xxx.L7LL: Standard design 7’ Cremone bolt right hand less lever 1 each 5125 lever left hand minus rose: 5152.xxx.LMR Nos. 8105, 8106 & 8107.xxx.R7/8R/LK are furnished with guides less knobs or levers.

CREMONE BOLT ExTENSION PACKETS: 8106.xxx.E24 2 FT. Extension Packet - Ornamental Design 8106.xxx.E48 4 FT. Extension Packet - Ornamental Design 8107.xxx.E24 2 FT. Extension Packet - Contemporary Design 8107.xxx.E48 4 FT. Extension Packet - Contemporary Design

These packets contain all the parts necessary to extend the top rod length of stock 7ft. or 8ft. Cremone Bolts for special door situations. The following chart illustrates which item to order for a particular door size.

NOTE: Extension packets are only available for Cremone Bolts with decorative covers. Not available for use with 8105 Cremone Bolts.

door size stock parts to be ordered

up to 9 ft. Standard 7 ft. Cremone Bolt and 2 ft. Extension up to 10 ft. Standard 8 ft. Cremone Bolt and 2 ft. Extension up to 11 ft. Standard 8 ft. Cremone Bolt and 4 ft. Extension up to 12 ft. Standard 8 ft. Cremone Bolt and 4 ft. Extension above 12 ft. Not Available

8105.xxxFor illustration purposEs only.trim availaBlE on ExtErior sidE.

Handing oF crEmonE Bolts

0310.xxx.univuniversal strikeTIER 1 FINISHES: 102, 150

0310.xxx.mortmortise strike

0310.xxx.anglangle strikeTIER 1 FINISHES: 102, 150TIER 2 FINISHES: 151

misc – crEmonE Bolts

169

030, 031, 033 034, 038, 040 050, 060, 102 Wt. (lbs.) 112, 150, 151 Item # Function Std. Box 190, 260, 264 003, 055, 056

8105.xxx Standard 7´ Doors (R7LK, L7LK) 457 480

8105.xxx Standard 8´ Doors (R8LK, L8LK) 594* N/A

8106, 8107.xxx Ornamental & Contemporary 7´ Doors (R7LK, L7LK) 549 572

8106, 8107.xxx Ornamental & Contemporary 8´ Doors (R8LK, L8LK) 766* N/A

8105.xxx.GD Cremone bolt rod guide 25** N/A

8105.xxx.REPL Bottom replacement rod for all cremone bolts 137 143

8105.xxx.7TOP Top replacement rod for cremone bolts for 7´ doors 92** N/A

8105.xxx.8TOP Top replacement rod for cremone bolts for 8´ doors 137 N/A

8105.xxx.R510/L510 Case assembly 132 137

8106.xxx.CVR Ornamental cover for cremone & surface bolts 37 41

8107.xxx.CVR Contemporary cover for cremone & surface bolts 37 41

8106.xxx.E24 24˝ extension rod w/ornamental cover 115 125

8107.xxx.E24 24˝ extension rod w/contemporary cover 115 125

8106.xxx.E48 48˝ extension rodw/ornamental cover 183 206

8107.xxx.E48 48˝ extension rod w/contemporary cover 183 206

8105.xxx – standard cremone Bolt

FEATURES: Supplied without decorative covers for guides.

NOTE: All 7´ Cremone Bolts are supplied with 4 guides and 8´ Cremone Bolts are supplied with 6 guides. Customer must purchase knob or lever, separately.

8106.xxx – ornamental cremone Bolt

FEATURES: Similar to 8105 Cremone Bolts except that the guides are concealed with decorative covers for a more elegant appearance.

8107.xxx – contemporary cremone Bolt

FEATURES: Similar to 8105 Cremone Bolts except that the guides are concealed with decorative covers for a more elegant appearance.

NOTE: 8105.xxx.8TOP is not available in 033 & 034.*Not available in 033, 034, 260 & 264**Not available in 260 & 264.

cremone bolts intended for use on intErior doors only.Cremone bolt rod cannot be distressed. The following are recommended to match distressed finishes: 402 = 102 452 = 151 412 = 112

NOTE: Cremone bolts are sold less knob/lever. Customers select Estate Collection knob or lever of their choice. Cremone mechanism is handed. Select cremone in same hand as door.

FEATURES: Covers available separately to facilitate stocking all designs.PACKED: 25 in a box with fasteners.WEIGHT: 8106: 2.7 lbs. (1.22kg)8107: 3 lbs. (1.36kg)

8106.xxx.cvrornamental cover

8107.xxx.cvrcontemporary cover

misc – crEmonE Bolts

171

1.5˝ (38mm) BACKSET—SPECIFICATIONSFEATURES: Sliding door locks are designed with a heavy gauge steel case for maximum Strength. Component parts are made primarily of solid forged brass, accurately machined for a lifetime of smooth operation. Flush edge pull provides convenient door mobility in pocket application. Fully reversible for right and left hand doors.STEEL CASE: .75˝ × 2.5˝ × 5.5˝ (19 × 64 × 140mm)FRONT: 1˝ × 8˝ (25 × 203mm). Available in widths of 1.375˝ (35mm) or 1.75˝ (44mm), depending on thickness of door.BACKSET: 1.5˝ (38mm)STRIKE: .5˝ × 1.25˝ (13 × 32mm) × .937˝ (24mm) projection.CYLINDER: Standard mortise type 03 keyway and two nickel silver keys. Locks are furnished with a 1˝ (25mm) length cylinder unless specified otherwise. Optional keyways available; refer to Section K.PREPARATION: 2.562˝ (65mm) deep × 5.75˝ (146mm) high cut-out is required.NOTE: Caution should be taken when using this unit on pairs of sliding doors where security is a concern. A keyed function must be used.

SLIDING DOOR LOCK TRIM ADAPTOR

FEATURES: Designed to be used to adapt a lever or a knob to a sliding door lock.

PACKED: Set contains parts to modify one side of a sliding door lock; one spindle, one rose, and installation instructions.

NOTE: Lever or Knob must be purchased separately. Use a solid spindle if knob or lever is installed on both sides.

FEATURES: Designed to be used as pulls on the inactive leaf of double sliding doors.

PACKED: Five in a box with fasteners.

No. 8570.xxx.ADAP(xxx - Insert Finish)

No. 8571

CUT-OUT ILLUSTRATION CUT-AWAY VIEW

STRIKE

LOCK MECHANISM

DUMMY TRIM FOR SLIDING DOOR LOCKS

misc – sliding door locks

171

misc – sliding door locks

8570.xxx – 1.375˝ doors8575.xxx – 1.75˝ doorsPASSAGE: Latch bolt by lever either side.

8580.xxx – 1.375˝ doors8585.xxx – 1.75˝ doorsPRIVACY: Latch bolt by lever either side, except when locked by turn piece inside. Furnished with Emergency Key No. 0417 for unlocking outside.

8581.xxx – 1.375˝ doors8586.xxx – 1.75˝ doorsPATIO: Latch bolt by lever either side, except when locked by turn piece inside.

8590.xxx – 1.375˝ doors8595.xxx – 1.75˝ doorsENTRANCE: Latch bolt by lever either side, except when locked by cylinder outside or turn piece inside. Turn piece must be used for locking to prevent accidental lockouts.

8591.xxx – 1.375˝ doors8596.xxx – 1.75˝ doorsDOUBLE CYLINDER: Latch bolt by lever either side, except when locked by cylinder outside or cylinder inside. Blocking rings required for proper cylinder operation on 1.375˝ and 1.750˝ thick doors.

IMPORTANT: For cylinder clearance, a mini-mum pocket width of 2.50˝ (54mm) is required.

030, 031, 033, 034 038, 040, 050 060, 102, 112 003 150, 151, 190 055Item # Function Door Thickness Wt. 260, 264 0568570.xxx Passage 1.375˝ 2.38575.xxx Passage 1.75˝ 2.58580.xxx Privacy 1.375˝ 2.4 $366 3838585.xxx Privacy 1.75˝ 2.58581.xxx Patio 1.375˝ 2.48586.xxx Patio 1.75˝ 2.58590.xxx Entrance 1.375˝ 2.98595.xxx Entrance 1.75˝ 3.0 417 4398591.xxx Double Cylinder 1.375˝ 3.38596.xxx Double Cylinder 1.75˝ 348571.xxx Dummy 1.375˝ & 1.75˝ 2.0 41 458570.xxx.ADAP Knob/Lever Adaptor .15 19 21

PACKED: One in a box with necessary fastenersDOOR THICKNESS: Sliding Door Locks only fit 1.375˝ and 1.75˝ doorsOther door thickness are NOT available

173

1.31 (33.3mm)

4.56 115.9mm)

8.59 (218.3mm)

1.66 (42.1mm)

2.23 (56.5mm)

.28 (7.1mm)

misc – gardEn door trim

INSIDE

1.31 (33.3mm)

4.56 (115.8mm)

8.59 (218.2mm)

1.81 (46.0mm)

2.12 (53.8mm)

.28 (7.1mm)

NOTE: Baldwin Garden Door hardware is designed exclusively for use with Andersen® doors.

1.31 (33.3mm)

4.00 (101.6mm)

8.00 (203.2mm)

1.55 (39.4mm)

2.13 (54.1mm)

.28 (7.1mm)

5970 – Hamilton gliding door trim 030, 031, 033, 034 038, 040, 050 060, 102, 112 003, 055 150, 151, 190 056, 402Item # Description 260, 264 412, 452

5970.xxx.BPG2 Hamilton Active Gliding Door Trim $290 306

5970.xxx.FDG Hamilton Dummy Gliding Door Trim $290 306

OUTSIDE

INSIDE

5971 – Boulder gliding door trim 030, 031, 033, 034 038, 040, 050 060, 102, 112 003, 055 150, 151, 190 056, 402Item # Description 260, 264 412, 452

5971.xxx.BPG2 Boulder Active Gliding Door Trim $290 306

5971.xxx.FDG Boulder Dummy Gliding Door Trim $290 306

OUTSIDE

INSIDE

5975 – concord gliding door trim 030, 031, 033, 034 038, 040, 050 060, 102, 112 003, 055 150, 151, 190 056, 402Item # Description 260, 264 412, 452

5975.xxx.BPG2 Concord Active Gliding Door Trim $290 306

5975.xxx.FDG Concord Dummy Gliding Door Trim $290 306

OUTSIDE

173

misc – gardEn door trim

1.31 (33.3mm)

4.00 (101.6mm)

8.00 (203.2mm)

1.66 (42.1mm)

2.23 (56.5mm)

.28 (7.1mm)

1.31 (33.3mm)

4.44 (112.8mm)

8.00 (203.2mm)

1.91 (48.5mm)

2.20 (55.9mm)

.28 (7.1mm)

5970.xxx.CHGFor Hamilton and Boulder Gliding Trim Only

5975.xxx.CHGFor Concord and Cody Gliding Trim Only

5980.xxx.CHGFor Springfield Gliding Trim Only

NOTE: Locking cylinder housings do not include cylinder and keys. Cylinder and keys from customer’s existing lock must be used. If new installation, cylinder and keys must be purchased from Andersen®.

INSIDE

5976 – cody gliding door trim 030, 031, 033, 034 038, 040, 050 060, 102, 112 003, 055 150, 151, 190 056, 402Item # Description 260, 264 412, 452

5976.xxx.BPG2 Cody Active Gliding Door Trim $290 306

5976.xxx.FDG Cody Dummy Gliding Door Trim $290 306

OUTSIDE

5980 – springfield gliding door trim 030, 031, 033, 034 038, 040, 050 060, 102, 112 003, 055 150, 151, 190 056, 402Item # Description 260, 264 412, 452

5980.xxx.BPG2 Springfield Active Gliding Door Trim $290 306

5980.xxx.FDG Springfield Dummy Gliding Door Trim $290 306

030, 031, 033, 034 038, 040, 050 060, 102, 112 003, 055 150, 151, 190 056, 402Item # Description 260, 264 412, 452

5970.xxx.CHG Hamilton/Boulder Exterior Cylinder Housing $68 73

5975.xxx.CHG Concord/Cody Exterior Cylinder Housing $68 73

5980.xxx.CHG Springfield Exterior Cylinder Housing $68 73

Exterior locking cylinder Housings

INSIDE OUTSIDE

175

FEATURES: Provides means to align and secure mortise locks to facilitate reversing of handed internal parts.

PACKED: One in a box.

WEIGHT PER BOx: .9 lb. (.41kg)

8472.0001 – CYLINDER PLUG FOLLOWER

8472.0002 – TWEEZERS

8472.0005 – SPRING COVER PUNCH

8480.000 – ALIGNING TOOL

8481.0001 – ALLEN WRENCH

8482.0001 – TRU-ARC PLIERS

8472.0003 – DEPTH KEY SET

8484.000 – LOCK REVERSING BLOCK

Set is furnished with 10 keys: 0 thru 9 depths.

For use in proper alignment of knobs, levers, roses and escutcheon with mortise locks/tubular latches.

For attachment of retaining rings on cylinder yokes.

For installation of set screws on all knobs and levers.

tools & accessoriesItem # Description Price

6707.009 Cylinder reinforcing plug $68472.000.001 Cylinder plug follower included with keying kits 358472.000.002 Tweezers for gripping cylinder pins included w/8472 kit 358472.000.003 Depth key set, furnished with 10 keys 358472.000.005 Punch used to stake spring covers on cylinders 358474.000.000 Alignment bushing (Bag of 50) 148480.000 Aligning tool. Used to align back plates & escutcheons w/locks 108481.000.001 1/8˝ alan wrench used to tighten set screws 48482.000.001 Tru-arc pliers. Used to attach e-rings on mortise lock cylinder yokes 698484.000 Lock reversing block. Simplifies changing hand of mortise locks 35

misc – tools & accEssoriEs

keying kits Item # Description Finish Price

8471.000 Small keying kit for keying (C) cylinders alike 000 $96 8472.000 Large keying kit for all (C )keying 000 448 applications inc. master keying

8320.009.101 #1 top pins (100 each per pack) 009 21 8320.009.102 #2 top pins (100 each per pack) 009 21 8320.009.103 #3 top pins (100 each per pack) 009 21 8320.009.202 #2 master pins (100 each per pack) 009 21 8320.009.203 #3 master pins (100 each per pack) 009 21 8320.009.204 #4 master pins (100 each per pack) 009 21 8320.009.205 #5 master pins (100 each per pack) 009 21 8320.009.206 #6 master pins (100 each per pack) 009 21 8320.009.207 #7 master pins (100 each per pack) 009 21 8320.009.208 #8 master pins (100 each per pack) 009 21 8320.009.209 #9 master pins (100 each per pack) 009 21

8320.152.300 #0 bottom pins (100 each per pack) 152 21 8320.152.301 #1 bottom pins (100 each per pack) 152 21 8320.152.302 #2 bottom pins (100 each per pack) 152 21 8320.152.303 #3 bottom pins (100 each per pack) 152 21 8320.152.304 #4 bottom pins (100 each per pack) 152 21 8320.152.305 #5 bottom pins (100 each per pack) 152 21 8320.152.306 #6 bottom pins (100 each per pack) 152 21 8320.152.307 #7 bottom pins (100 each per pack) 152 21 8320.152.308 #8 bottom pins (100 each per pack) 152 21 8320.152.309 #9 bottom pins (100 each per pack) 152 21 8320.152.401 Hotel pin 152 21

8300.109.005 Tumbler springs 109 24 8300.009.0065 Spring covers 009 24 8300.009.0066 Spring covers 009 23

8300.509.STD Standard cams 509 5 8300.509.AR Adams rite cams 509 5 8300.509.004 Cam mounting screws 509 28

8313.329.TPH1 Tailpiece (regular) 329 5 8313.329.TPH2 Tailpiece (long) 329 6 8313.509.008 Mounting plate 509 2 8313.509.009 Mounting screws 509 2

8333.009.007 Tailpiece plate 009 2 8333.009.010 Spacer 009 2

8472.000.001 Cylinder plug follower 000 35 8011.028.0025 Washer 028 2 8011.039.0027 Cap 039 3

8053.028.TP1 Tailpiece - double cylinder 028 2 8053.028.TP2 Tailpiece - emergency exit 028 2 8053.028.TP3* Tailpiece - single cylinder for 1 3/8″ door thickness 028 2 8053.028.TP4 Tailpiece - single cylinder for 1 3/4″ door thickness 028 2

8475.000.001 Cap tool 000 4 8472.000.004 Shim 000 1 8011.039.0023 Pins 039 1 8011.109.0022 Springs 109 1 8472.000.006 Key gauge 000 11 8472.000.002 Tweezers 000 34

9935.999 Stile-right template 999 28 9940.000.A Finish demonstrator 000 32**

*NOTE: 8053.028.TP3 Tailpiece for doors 1 3/8˝ thick is not supplied as a standard component of the kit but can be ordered separately.

**Net Price

175

multi-pointtrim


april 2009

177

Introducing Baldwin Multi-Point door

trim. Now available in configurations

to fit all major multi-point door and

lock manufacturers!

> Fits 92 and 105 mm cylinder to lever C.T.C.

> Estate Collection finish options to suit any home.

> Profile or American Cylinder.

> Available as complete sets, minus lever sets, or choose your own lever style to build a set.

> Easy installation with one-box shipping and cylinder/hardware for 1.75˝ thick door.

> Through-bolt mounting.

> Thick door kits available.

> All Profile and American cylinders are field keyable to Baldwin keyway.

> 112 finish now available for all Profile cylinders

MPM T

MULTI-POINT

TUBULARMORTIS

E

MPM T

MULTI-POINT

TUBULARMORTIS

E

MPM T

MULTI-POINT

TUBULARMORTIS

E

NEw! Watch for this icon as your quick guide to coordinating Baldwin lock hardware throughout your home. Your favorite Baldwin styles are now available in Mortise for entrance needs, Tubular for entrance/interiors, AND Multi-Point for patio doors!

multi-point – How to ordEr

Cody – MP015 Concord – MP004Bismark – MP002 Boulder – MP016

Lakeshore – MP013 Springfield – MP001

Kensington – MP003

Richland MP011

Bristol MP009

two nEw stylEs!

rEcommEndEd FinisHEs original FinisHEs

040 003, 030, 031, 033, 034, 060, 040, 050, 038

112 412, 102, 190, 402, 112

264 055, 056, 150, 151, 260, 264, 452

proFilE cylindErs


040 003, 030, 031, 033, 034, 038, 040, 050, 060, 102, 112, 190, 402, 412,

264 055, 056, 150, 151, 260, 264, 452

amErican cylindErs

177

1. Pick Your Multi-Point Trim (left): MP001 – Springfield Multi-Point Trim

MP002 – Bismark Multi-Point Trim

MP003 – Kensington Multi-Point Trim

MP004 – Concord Multi-Point Trim

MP009 – Bristol Multi-Point Trim

MP011 – Richland Multi-Point Trim

MP013 – Lakeshore Multi-Point Trim

MP015 – Cody Multi-Point Trim

MP016 – Boulder Multi-Point Trim

2. Specify Required Door Configuration: PAGES

Configuration #1 – Profile Cylinder Below Handle 178 92mm CTC, 8.5˝ Mounting Hole CTC

Configuration #2 – American Cylinder Above Handle 180 105mm CTC, 8.5˝ Mounting Hole CTC Configuration #3 – American Cylinder Below Handle 182 92mm CTC, 8.375˝ Mounting Hole CTC

Configuration #4 – Profile Cylinder Below Handle 184 92mm CTC, 7.875˝ Mounting Hole CTC

Configuration #5 – American Cylinder Above or Below Handle 186 92mm CTC, 7.5625˝ Mounting Hole CTC

Configuration #6 – American Cylinder Above Handle 188 92mm CTC, 7.25 Mounting Hole CTC

3. Pick Your Function: ACT – Entry, keyed w/ turnknob (supplied w/ cylinder for 1 3/4˝ door thickness)

FDP – Passage, active, no cylinder or turnknob

AIN – Inactive outside and active inside- non-keyed

FD – Inactive, non-keyed

PAT – Patio, non-keyed

4. Specify minus lever option, if desired: Add “x” to suffix for minus lever option. Otherwise trim ships with stock lever choice as shown.

Examples:

5. If a lever other than the standard is desired: Order a trim withou levers and order levers separately.

6. If split finish, order escutcheons, levers, and corresponding thick door kits separately

How to ordEr

MP001 . 102 . ACT3xSpringfield Multi-Point Trim

102 (Oil Rubbed Bronze) Finish

Minus Lever

Door Configuration #3

Active Entry Function

MP004 . 402 . PAT4 Concord Multi-Point Trim

402 (Distressed Oil Rubbed Bronze) Finish Door Configuration #4

Patio Function

179

stEp

1 Pick your multi-point trimDimensional Drawings

American Cylinder Above Handle shown

Tier 1

Tier 2

Boulder – mp0165452 lever included

.3˝

2.3˝

1.3˝

2.0˝

11.9˝

.5˝

2.9˝

1.3˝

2.0˝

11˝

cody – mp0155452 lever included

concord – mp0045445 lever included

.3˝

2.1˝

1.3˝

2.0˝

11˝

kensington – mp0035108 lever included

.4˝

2.3˝

1.5˝

2.2˝

12.7˝

.5˝

2.9˝

1.3˝

1.7˝

11˝

lakeshore – mp0135162 lever included

1.3˝

.3˝springfield – mp0015455 lever included 2.3˝2.0˝

11˝

Bismark – mp0025152 lever included

.4˝

2.3˝

1.5˝

1.75˝

11˝

Bristol – mp0095104 lever included

2.3˝

1.5˝

3˝

11˝

richland – mp0115190 lever included

12˝

2.1˝ 2.2˝

1.4˝

.4˝

2.0˝

179

Choose your Door Configuration

Profile Cylinder Below Handle — 3-5/8 ̋(92 mm) center to center8-1/2 ̋center to center mounting hole location

G-U,® Hoppe,® Hurd, ® JELD-WEN,® Kolbe & Kolbe,® Lincoln,® Loewen,® Norco,® Peachtree,® Pozzi,® Semco,® Vetter,® Weathershield,® Therma-Tru®

#1American Cylinder Above Handle — 4-1/8 ̋(105 mm) center to center

8-1/2 ̋center to center mounting hole location#2American Cylinder Below Handle — 3-5/8 ̋(92 mm) center to center

8-3/8 ̋center to center mounting hole location

Pella®

#3Profile Cylinder Below Handle — 3-5/8 ̋(92 mm) center to center


Caradco, ® G-U,® Hoppe,® Hurd,® Eagle,® Kolbe & Kolbe,® Lincoln,® Loewen,® Norco,® Peachtree,® Pozzi,® Semco,® Sierra Pacific,® Vetter,® Weathershield,® and others

#4American Cylinder Above or Below Handle — 3-5/8 ̋(92 mm) center to center


G-U,® Eagle,® BiltBest,® Marvin Integrity,® Pella®

Sierra Pacific,® Superior,® Willmar®



Ashland,® Caradco,® Milgard,® Marvin,® Peachtree,® Weathershield®

#6

Page 178

Page 180

Page 182

Page 184

Page 186

Page 188

Go To:

Baldwin, Baldwin Estate collection and other names of Baldwin products referenced herein are trademarks or registered trademarks of Baldwin Hardware Corporation. All other company names mentioned herein are the trademarks or registered trademarks of their respective owners.

stEp

2

181

witHout lEvErs

Bismark, Boulder, cody, 030, 031, 033 030, 031, 033 concord, lakeshore, springfield 034, 038, 040 003, 055 034, 038, 040 003, 055 050, 060, 102 056, 402 050, 060, 102 056, 402 112, 150, 151 412, 452 112, 150, 151 412, 452 190, 260, 264 190, 260, 264

Entrance profile cylinder multi-point ACT1 Entry - Keyed W/ Turnknob $495 564 366 417passage multi-point FDP1 Passage - Active No Cylinder Or Turnknob 413 469 284 323Half inactive / Half passage multi-point AIN1 Inactive Outside And Active Inside - Non-keyed 413 469 284 323Full inactive multi-point FD1 Inactive - Non-keyed 413 469 284 323patio multi-point PAT1 Patio - Non-keyed 413 469 284 323

witHout lEvErs

030, 031, 033 030, 031, 033 kensington, Bristol, richland 034, 038, 040 003, 055 034, 038, 040 003, 055 050, 060, 102 056, 402 050, 060, 102 056, 402 112, 150, 151 412, 452 112, 150, 151 412, 452 190, 260, 264 190, 260, 264


030, 031, 033 034, 038, 040 003, 055 050, 060, 102 056, 402 112, 150, 151 412, 452 190, 260, 264 multi-point, Escutcheons only KNI1 KN, Cut for Knob Inside $170 194KNIR1 KN, Cut for Knob Inside - Rigid Lever 170 194KNO1 KN, Cut for Knob Outside 170 194KNOR1 KN, Cut for Knob Outside - Rigid Lever 170 194KC1 KC, Cut for Cylinder Outside - Pro C1 192 218KCT1 KC, Cut for Cylinder Inside - Pro C1 192 218




G-U,® Hoppe,® Hurd,® JELD-WEN,® Kolbe & Kolbe,® Lincoln,® Loewen,® Norco,® Peachtree,® Pozzi,® Semco,® Vetter,® Weathershield,® Therma-Tru®

stEp

3 Choose functionSwinging Patio Door Hardware –

Set includes Plates, Handles and Cylinders (where applicable)

BismarkMP002

BoulderMP016

CodyMP015

ConcordMP004

LakeshoreMP013

SpringfieldMP001

BristolMP009

RichlandMP011

KensingtonMP003

act1 – Entrance profile cylinder

Fdp1 – passage

ain1 – Half inactive/Half passage

181

ACT1 – Entrance Profile Cylinder

FDP1 – Passage

AIN1 – Half Inactive/Half Passage

FD1 – Full Inactive

PAT1 – Patio

ACT1 1 3/4˝ 2˝ 2 1/4˝ 2 3/8˝ 2 1/2˝ 2 3/4˝ List Price

All others MP000.xxx.ACTD MP000.xxx.ACTD MP000.xxx.ACTE MP000.xxx.ACTF MP000.xxx.ACTG MP000.xxx.ACTG $106

Bismark, Kensington, Lakeshore

MP000.xxx.ACTD MP000.xxx.ACTE MP000.xxx.ACTE MP000.xxx.ACTF MP000.xxx.ACTG MP000.xxx.ACTI $106

PAT1 1 3/4˝ 2˝ 2 1/4˝ 2 3/8˝ 2 1/2˝ 2 3/4˝

All others MP000.xxx.PATJ MP000.xxx.PATJ MP000.xxx.PATK MP000.xxx.PATL MP000.xxx.PATM MP000.xxx.PATM $106


MP000.xxx.PATJ MP000.xxx.PATK MP000.xxx.PATK MP000.xxx.PATL MP000.xxx.PATM MP000.xxx.PATO $106

AIN Sets 1 3/4˝ to 2 1/4˝ 2 3/8˝ to 2 3/4˝

MP000.000.AINS MP000.000.AINT $21

FD Sets 1 3/4˝ to 2 1/4˝ 2 3/8˝ to 2 3/4˝

MP000.000.FDPTP MP000.000.FDPTQ $21

FDP Sets 1 3/4˝ to 2 1/4˝ 2 3/8˝ to 2 3/4˝


Thick Door KitsBaldwin Multi-Point Active & Patio trims assume 1.75˝ door thickness. For thicker doors, please order a Thick Door kit according to the chart below. Specify cylinder finish where noted. Available cylinder finishes include ONLY 264 (Satin Chrome), 040 (Satin Brass) and 112 (Venetian Bronze). See finish chart on page 176 for cylinder finish recommendations.

ACT kits include: 8mm to 7.3mm Conversion Spindle, Keyed Cylinder, and Cylinder Installation HardwarePAT kits include: 8mm to 7.3mm Conversion Spindle, Patio Cylinder, and Cylinder Installation HardwareAIN kits include: Half spindle, and Spindle Installation HardwareFDPTP kits include: 8mm to 7.3mm Conversion Spindle

Included w/ standard sets

183



stEp

3 Choose functionSwinging Patio Door Hardware –


witHout lEvErs


Entrance american cylinder multi-point ACT2 Entry - Keyed W/ Turnknob $516 587 387 440105 mm double door FWHAP Double Door Entry - 1 Keyed, 1 Inactive 928 1056 670 763passage multi-point FDP2 Passage - Active No Cylinder Or Turnknob 413 469 284 323Half inactive / Half passage multi-point AIN2 Inactive Outside And Active Inside - Non-keyed 413 469 284 323Full inactive multi-point FD2 Inactive - Non-keyed 413 469 284 323patio multi-point PAT2 Patio - Non-keyed 413 469 284 323

witHout lEvErs


Entrance american cylinder multi-point ACT2 Entry - Keyed W/ Turnknob $567 646 438 499passage multi-point FDP2 Passage - Active No Cylinder Or Turnknob 444 505 314 358Half inactive / Half passage multi-point AIN2 Inactive Outside And Active Inside - Non-keyed 444 505 314 358Full inactive multi-point FD2 Inactive - Non-keyed 444 505 314 358patio multi-point PAT2 Patio - Non-keyed 444 505 314 358

030, 031, 033 034, 038, 040 003, 055 050, 060, 102 056, 402 112, 150, 151 412, 452 190, 260, 264 multi-point, Escutcheons only KNI2 KN, Cut for Knob Inside $170 194KNIR2 KN, Cut for Knob Inside - Rigid Lever 170 194KNO2 KN, Cut for Knob Outside 170 194KNOR2 KN, Cut for Knob Outside - Rigid Lever 170 194KCA2 KC, Cut for Cylinder Outside - Ande C2 210 239KTA2 KT, Cut for Turnpiece Inside - Ande C2 192 218

030, 031, 033 034, 038, 040 003, 055 050, 060, 102 056, 402 112, 150, 151 412, 452 190, 260, 264 multi-point, Escutcheons only KNI2 KN, Cut for Knob Inside $196 223KNIR2 KN, Cut for Knob Inside - Rigid Lever 196 223KNO2 KN, Cut for Knob Outside 196 223KNOR2 KN, Cut for Knob Outside - Rigid Lever 196 223KCA2 KC, Cut for Cylinder Outside - Ande C2 244 277KTA2 KT, Cut for Turnpiece Inside - Ande C2 221 251

BismarkMP002

BoulderMP016

CodyMP015

ConcordMP004

LakeshoreMP013

SpringfieldMP001

BristolMP009

RichlandMP011

KensingtonMP003

act2 – Entrance american cylinder

Fdp2 – passage


183

special notes• Boulder, Cody, Concord, Springfield Double Door Applications Only — Due to the special fit requirements of applying these four 105mm CTC styles in a double door application, the modified dimensions shown below apply to these four styles for double door applications only. Please specify function ‘FWHAP’ or ‘FWHAx’ to order. Pricing is as shown.• Due to the width of the escutcheon plates, Bristol, Richland and Kensington are not recommended on double door applications for 105mm CTC confirgurations.• The standard Bismark and Lakeshore plates can be used on double door applications for 105mm CTC configurations.

Boulder, cody, concord, springfield 030, 031, 033 034, 038, 040 003, 055 050, 060, 102 056, 402 112, 150, 151 412, 452 190, 260, 264

105 mm double door FWHAP Active & Inactive Set $928 1056FWHAx Active & Inactive Set w/o Levers 670 763


Fdp2 – passage


Fd2 – Full inactive

pat2 – patio

act2* 1 3/4˝ list price

MP000.xxx.ACTR* $106

ain sets 1.75˝

MP000.000.AINS $21

ain sets 2˝ to 2 1/4˝ 2 3/8˝ to 3˝

MP000.000.AINS MP000.000.AINT $21

Fd sets 1 3/4˝ to 2 1/4˝ 2 3/8˝ to 2 3/4˝


Fdp sets 1 3/4˝ to 2 1/4˝ 2 3/8˝ to 2 3/4˝


1.63 (41.4mm) .33

(8.4mm)

10.13 (257.3mm)

4.00 (101.6mm)

1.92 (48.8mm)

1.59 (40.4mm)

10.88 (276.3mm)

4.19 (106.3mm)

2.30 (59.0mm)

.33 (8.3mm)

1.73 (43.9mm)

11.09 (281.7mm) 3.97

(100.8mm)2.30

(59.0mm)

.33 (8.3mm)

1.63 (41.5mm)

10.13 (275.4mm)

4.19 (106.3mm)

2.30 (59.0mm)

.33 (8.3mm)

105mmdouBlE door dimEnsional

drawings

BoulderMP016

SpringfieldMP001

ConcordMP004

CodyMP015

105 mm douBlE door

thick door kitsSpecify cylinder finish where noted. *ACT2 - Finish matches trim exactly (any of the 21 Baldwin finishes)

ACT kits include: 8mm to 7.3mm Conversion Spindle, Keyed Cylinder, and Cylinder Installation HardwarePAT kits include: 8mm to 7.3mm Conversion SpindleAIN kits include: Half spindle, and Spindle Installation HardwareFDPTP kits include: 8mm to 7.3mm Conversion Spindle

included w/ standard sets

185

Choose functionSwinging Patio Door Hardware –


#3American Cylinder Below Handle — 3-5/8 ̋(92 mm) center to center


Pella®

stEp

3

witHout lEvErs



witHout lEvErs



030, 031, 033 034, 038, 040 003, 055 050, 060, 102 056, 402 112, 150, 151 412, 452 190, 260, 264 multi-point, Escutcheons only KNI3 KN, Cut for Knob Inside $170 194KNIR3 KN, Cut for Knob Inside - Rigid Lever 170 194KNO3 KN, Cut for Knob Outside 170 194KNOR3 KN, Cut for Knob Outside - Rigid Lever 170 194KC3 KC, Cut for Cylinder Outside - American C3 210 239KT3 KT, Cut for Turnpiece Inside - American C3 192 218PKT3 Patio KT, Cut for Turnpiece Inside - C3 192 218


BismarkMP002

BoulderMP016

CodyMP015

ConcordMP004

LakeshoreMP013

SpringfieldMP001

BristolMP009

RichlandMP011

KensingtonMP003


Fdp3 – passage


185

ACT3 – Entrance American Cylinder

FDP3 – Passage



PAT3 – Patio

ACT3 1 3/4˝ to 2 1/4˝ 2 3/8˝ to 2 1/2˝ 2 3/4˝ List Price

MP000.xxx.ACTA MP000.xxx.ACTB MP000.xxx.ACTC $50

PAT3 1 3/4˝ to 2 1/4˝ 2 3/8˝ to 2 3/4˝


AIN Sets 1 3/4˝ to 2 1/4˝ 2 3/8˝ to 2 3/4˝

MP000.000.AINS MP000.000.AINT $21

FD Sets 1 3/4˝ to 2 1/4˝ 2 3/8˝ to 2 3/4˝


FDP Sets 1 3/4˝ to 2 1/4˝ 2 3/8˝ to 2 3/4˝


Thick Door KitsConfig #3 Multi-Point come standard for 1 3/4” to 2 1/4” door thickness. For thicker doors, please order a Thick Door kit according to the chart below.Specify cylinder finish where noted. Available cylinder finishes include 264 (Satin Chrome) and 040 (Satin Brass) ONLY. See finish chart on page 176 for cylinder finish recommendations.



187



Caradco,® G-U,® Hoppe,® Hurd,® Eagle,® Kolbe & Kolbe,® Loewen,® Lincoln,® Norco,® Peachtree,® Pozzi,® Sierra Pacific,® Semco,® Vetter,® Weathershield,® and others

BismarkMP002

BoulderMP016

CodyMP015

ConcordMP004

Kensington*MP003

LakeshoreMP013

SpringfieldMP001



stEp

3

witHout lEvErs



witHout lEvErs





BristolMP009

RichlandMP011


Fdp4 – passage


187


Fdp4 – passage


Fd4 – Full inactive

pat4 – patio

act4 1 3/4˝ 2˝ 2 1/4˝ 2 3/8˝ 2 1/2˝ 2 3/4˝ list price




pat4 1 3/4˝ 2˝ 2 1/4˝ 2 3/8˝ 2 1/2˝ 2 3/4˝




ain sets 1 3/4˝ to 2 1/4˝ 2 3/8˝ to 2 3/4˝

MP000.000.AINS MP000.000.AINT $21

Fd sets 1 3/4˝ to 2 1/4˝ 2 3/8˝ to 2 3/4˝


Fdp sets 1 3/4˝ to 2 1/4˝ 2 3/8˝ to 2 3/4˝


thick door kitsConfig #4 Multi-Point Active and Patio trims assume 1.75˝ door thickness. For thicker doors, please order a Thick Door kit according to the chart below. Specify cylinder finish where noted. Available cylinder finishes include ONLY 264 (Satin Chrome), 040 (Satin Brass) and 112 (Venetian Bronze). See finish chart on page 176 for cylinder finish recommendations.



189

LakeshoreMP013

ConcordMP004

CodyMP015

BoulderMP016

#5American Cylinder Above or Below Handle — 3-5/8 ̋(92 mm) center to center


G-U,® Eagle,® BiltBest,® Marvin Integrity,® Pella®

Sierra Pacific,® Superior,® Willmar®

NOTE: #5 cylinder to spindle orientation is reversible, works for both above and below handle mounting.

BismarkMP002

Kensington*MP003



stEp

3

witHout lEvErs



witHout lEvErs





SpringfieldMP001

BristolMP009

RichlandMP011


Fdp5 – passage


189


FDP5 – Passage



PAT5 – Patio



PAT5 1 3/4˝ to 2 1/4˝ 2 3/8˝ to 2 3/4˝


AIN Sets 1 3/4˝ to 2 1/4˝ 2 3/8˝ to 2 3/4˝

MP000.000.AINS MP000.000.AINT $21

FD Sets 1 3/4˝ to 2 1/4˝ 2 3/8˝ to 2 3/4˝


FDP Sets 1 3/4˝ to 2 1/4˝ 2 3/8˝ to 2 3/4˝


Thick Door KitsConfig #5 Multi-Point trims come standard for 1 3/4” to 2 1/4”door thickness. For thicker doors, please order a Thick Door kit according to the chart below. Specify cylinder finish where noted. Available cylinder finishes include 264 (Satin Chrome) and 040 (Satin Brass) ONLY.See finish chart on page 176 for cylinder finish recommendations.



191



Ashland,® Caradco,® Milgard,® Marvin,® Peachtree,® Weathershield®

BismarkMP002

Boulder*MP016

Cody*MP015

ConcordMP004

KensingtonMP003

LakeshoreMP013

SpringfieldMP001



stEp

3

witHout lEvErs


Entrance american cylinder multi-point ACT6 Entry - Keyed W/ Turnknob $516 587 387 440passage multi-point FDP6 Passage - Active No Cylinder Or Turnknob 413 469 284 323Half inactive / Half passage multi-point AIN6 Inactive Outside And Active Inside - Non-keyed 413 469 284 323Full inactive multi-pointFD6 Inactive - Non-keyed 413 469 284 323patio multi-point PAT6 Patio - Non-keyed 413 469 284 323

witHout lEvErs





BristolMP009

RichlandMP011


Fdp6 – passage


191


FDP6 – Passage



PAT6 – Patio



PAT6 1 3/4˝ to 2 1/4˝ 2 3/8˝ to 2 3/4˝


AIN Sets 1 3/4˝ to 2 1/4˝ 2 3/8˝ to 2 3/4˝

MP000.000.AINS MP000.000.AINT $21

FD Sets 1 3/4˝ to 2 1/4˝ 2 3/8˝ to 2 3/4˝


FDP Sets 1 3/4˝ to 2 1/4˝ 2 3/8˝ to 2 3/4˝


Thick Door KitsConfig #6 Multi-Point trims come standard for 1 3/4˝ to 2 1/4” door thickness. For thicker doors, please order a Thick Door kit according to the chart below. Specify cylinder finish where noted. Available cylinder finishes include 264 (Satin Chrome) and 040 (Satin Brass) ONLY.See finish chart on page 176 for cylinder finish recommendations.



european mortise trim


april 2009

193

195

1. Pick Your Trim (left): MP001 – Springfield European Mortise Trim MP002 – Bismark European Mortise Trim MP003 – Kensington European Mortise Trim MP004 – Concord European Mortise Trim MP009 – Bristol European Mortise Trim MP011 – Richland European Mortise Trim MP013 – Lakeshore European Mortise Trim MP015 – Cody European Mortise Trim MP016 – Boulder European Mortise Trim

2. Specify Required Door Configuration: Configuration #7 – European Mortise – 72mm CTC

Configuration #8 – European Mortise – 85mm CTC

3. Pick Your Function: ACT – Entry, keyed w/ turnknob (supplied w/ cylinder for 44.45 mm door thickness)

FDP – Passage, active, no cylinder or turnknob

FD – Inactive, non-keyed

PAT – Patio, non-keyed

4. Specify minus lever option, if desired: Add “x” to suffix for minus lever option. Otherwise trim ships with stock lever choice as shown.

Examples:

5. If a lever other than the standard is desired: Order trim without levers and order levers separately

6. If split finish, order components separately Escutcheon, lever, kit will be priced separately

How to ordEr – European mortise

MP001 . 102 . ACT7xSpringfield European Mortise Trim

102 (Oil Rubbed Bronze) Finish

Minus Lever

Door Configuration #7

Active Entry Function

MP004 . 402 . PAT8 Concord European Mortise Trim

402 (Distressed Oil Rubbed Bronze) Finish Door Configuration #8

Patio Function


040 003, 030, 031, 033, 034, 060, 040, 050, 038

112 412, 102, 190, 402, 112

264 055, 056, 150, 151, 260, 264, 452

rEcommEndEd cylindEr FinisHEs

195

European Mortise Cylinder — 72mm center to center

European Mortise Cylinder — 85mm center to center

#7#8

stEp

1st

Ep 2

Pick your European Mortise trimDimensional Drawings

Tier 1

Tier 2

Boulder – mp0165452 lever included

.3˝

2.3˝

1.3˝

2.0˝

11.9˝

.5˝

2.9˝

1.3˝

2.0˝

11˝

cody – mp0155452 lever included

concord – mp0045445 lever included

.3˝

2.1˝

1.3˝

2.0˝

11˝

kensington – mp0035108 lever included

.4˝

2.3˝

1.5˝

2.2˝

12.7˝

.5˝

2.9˝

1.3˝

1.7˝

11˝

lakeshore – mp0135162 lever included

1.3˝

.3˝springfield – mp0015455 lever included 2.3˝2.0˝

11˝

Bismark – mp0025152 lever included1.75˝

11˝

.4˝

2.3˝

1.5˝

2.0˝

1.5˝

.3˝

2.3˝

Bristol – mp0095104 lever included

richland – mp0115190 lever included

12˝

2.1˝

Choose your Door Configuration1.4˝

.4˝

2.2˝

197

witHout lEvErs


Entrance mortise cylinder European mortise ACT7 Entry - Keyed W/ Turnknob $495 564 366 417passage European mortise FDP7 Passage - Active No Cylinder Or Turnknob 413 469 284 323Full inactive European mortise FD7 Inactive - Non-keyed 413 469 284 323patio European mortise PAT7 Patio - Non-keyed 413 469 284 323

witHout lEvErs



030, 031, 033 034, 038, 040 003, 055 050, 060, 102 056, 402 112, 150, 151 412, 452 190, 260, 264 Escutcheons only KNI7 KN, Cut for Knob Inside $170 194KNIR7 KN, Cut for Knob Inside - Rigid Lever 170 194KNO7 KN, Cut for Knob Outside 170 194KNOR7 KN, Cut for Knob Outside - Rigid Lever 170 194KC7 KC, Cut for Cylinder Outside - Pro C1 192 218KCT7 KC, Cut for Cylinder Inside - Pro C1 192 218


#7European Mortise Cylinder — 72mm center to center

215.9 mm center to center mounting hole location

stEp

3 Choose functionEuropean Mortise Hardware –


BismarkMP002

BoulderMP016

CodyMP015

ConcordMP004

KensingtonMP003

LakeshoreMP013

SpringfieldMP001

BristolMP009

RichlandMP011

act7 – Entrance mortise cylinder

Fdp7 – passage

197


Fdp7 – passage Fd7 – Full inactive

pat1 – patio

act1 1 3/4˝ 2˝ 2 1/4˝ 2 3/8˝ 2 1/2˝ 2 3/4˝ list price




pat1 1 3/4˝ 2˝ 2 1/4˝ 2 3/8˝ 2 1/2˝ 2 3/4˝




Fd sets 1 3/4˝ to 2 1/4˝ 2 3/8˝ to 2 3/4˝


Fdp sets 1 3/4˝ to 2 1/4˝ 2 3/8˝ to 2 3/4˝


thick door kitsBaldwin European Mortise trims assume 1.75˝ door thickness. For thicker doors, please order a Thick Door kit according to the chart below. Specify cylinder finish where noted. Available cylinder finishes include ONLY 264 (Satin Chrome), 040 (Satin Brass) and 112 (Venetian Bronze). See finish chart on page 194 for cylinder finish recommendations.

ACT kits include: 8mm to 7.3mm Conversion Spindle, Keyed Cylinder, and Cylinder Installation HardwarePAT kits include: 8mm to 7.3mm Conversion Spindle, Patio Cylinder, and Cylinder Installation HardwareFDPTP kits include: 8mm to 7.3mm Conversion Spindle


pat7 – patio

199

witHout lEvErs



witHout lEvErs





#8European Mortise Cylinder — 85mm center to center

215.9 mm center to center mounting hole location

stEp

3 Choose functionEuropean Mortise Hardware –


BismarkMP002

BoulderMP016

CodyMP015

ConcordMP004

KensingtonMP003

LakeshoreMP013

SpringfieldMP001

BristolMP009

RichlandMP011


Fdp8 – passage

199


Fdp8 – passage Fd8 – Full inactive

pat1 – patio

act1 1 3/4˝ 2˝ 2 1/4˝ 2 3/8˝ 2 1/2˝ 2 3/4˝ list price




pat1 1 3/4˝ 2˝ 2 1/4˝ 2 3/8˝ 2 1/2˝ 2 3/4˝




Fd sets 1 3/4˝ to 2 1/4˝ 2 3/8˝ to 2 3/4˝


Fdp sets 1 3/4˝ to 2 1/4˝ 2 3/8˝ to 2 3/4˝


thick door kitsBaldwin European Mortise trims assume 1.75˝ door thickness. For thicker doors, please order a Thick Door kit according to the chart below. Specify cylinder finish where noted. Available cylinder finishes include ONLY 264 (Satin Chrome), 040 (Satin Brass) and 112 (Venetian Bronze). See finish chart on page 194 for cylinder finish recommendations.

ACT kits include: 8mm to 7.3mm Conversion Spindle, Keyed Cylinder, and Cylinder Installation HardwarePAT kits include: 8mm to 7.3mm Conversion Spindle, Patio Cylinder, and Cylinder Installation HardwareFDPTP kits include: 8mm to 7.3mm Conversion Spindle


pat8 – patio

201

201

rim locks – standards & spEciFications

Pride in our American Heritage and renewed interest in its early history has greatly influenced U.S. architecture. With careful research and design, Baldwin has authentically reproduced a piece of that heritage – colonial rim locks. > Constructed with solid forged brass parts for exceptional durability

and smooth operation> Trim designs secured to a broached spindle with an epoxy (resin)

coated set screw – prohibits screw from loosening> Interior rim locks use bit keys. Bit keys may be ordered fixed

permanently into the lock by ordering as .RBIT or .LBIT configurations.

NOTE: Hand of door is always determined from outsideIMPORTANT: A dummy trim rim lock must be used on ALL pairs of reverse bevel doors

LEFT HAND CONDITION (SINGLE DOOR)

RIGHT HAND CONDITION (SINGLE DOOR)

Handing of Rim Lock Plates

rim lock mechanism

203

5701, 5702, 5704.xxx – small Horizontal rim lockCASE: 3.75˝ × 4.75˝ × .875˝ KEEPER: 3.75˝ × .875˝ × 1.625˝BACKSET: 3.5˝ TO BIT KEY: 2.375˝

RIM LOCKS ARE NOT REVERSIBLE – SPECIFY HAND OF DOORS IMPORTANT: A dummy trim rim lock must be used on ALL pairs of reverse bevel doors Bit Key can be permanently fitted at an extra charge of $10 (add ‘BIT’ to end of suffix: eg. 5600.xxx.R becomes 5600.xxx.RBIT)*5604.xxx – Fixed bit key NOT available

rim locks – passagE, privacy & EntrancE

5600, 5602, 5604.xxx – small vertical rim lockCASE: 4.75˝ × 3.75˝ × .875˝ KEEPER: 4.75˝ × .875˝ × 1.625˝BACKSET: 2.75˝ Upright design well suited for narrow stile doors5604.xxx – Bit key NOT available.

5630, 5632, 5634.xxx – 7˝ Horizontal rim lockCASE: 4˝ × 6.75˝ × .875˝ KEEPER: 4˝ × .875˝ × 1.625˝BACKSET: 5.25˝

Full dummy rim locksHollow rim lock case (without any working mechanism)INCLUDED: 5030 Knobs – pair5002 Rose – half pair

passage rim locksLatch bolt by knob either sideINCLUDED: 5755 Bit key Key can be permanently fitted at extra charge (.RBIT, .LBIT)5030 Knobs – pair5002 Rose – half pair

privacy rim locksLatch bolt by knob either sideDead bolt by bit key either sideINCLUDED: 5755 Bit key – used w/ privacy function Key can be permanently fitted at extra charge (.RBIT, .LBIT)0406 Cover Plate5753 Emergency key – s/b stored in readily accessible place5030 Knobs – pair5002 Rose – half pair

Entrance rim locksLatch bolt by knob either sideDead bolt by key outside and slide bolt insideINCLUDED: 8333 Cylinder6755 Cylinder Cover Plate6757 Cylinder Cover Plate*5030 Knobs – pair5002 Rose – half pair* Only in case of 5704.

031, 033, 034 038. 040, 050 060, 102, 112 003 150, 151, 190 055Item # Description Function Wt. Backset 260, 264 056

5600.xxx.R (.L, .RR, .LR) Small Vertical Rim Lock Passage 3.7 2.75˝ $636 6705600.xxx.RFD (.LFD) Small Vertical Rim Lock Full Dummy 3.7 2.75˝ 318 3355602.xxx.R (.L, .RR, .LR) Small Vertical Rim Lock Privacy 4.0 2.75˝ 750 7845602.xxx.RFD (.LFD) Small Vertical Rim Lock Full Dummy 3.7 2.75˝ 375 3925604.xxx.R (.L, .RR, .LR)* Small Vertical Rim Lock Entrance 4.6 2.75˝ 813* 858*5604.xxx.RFD (.LFD)* Small Vertical Rim Lock Entrance 4.6 2.75˝ 407* 428*

5630.xxx.R (.L, .RR, .LR) 7˝ Horizontal Rim Lock Passage 4.4 5.25˝ 698 7325630.xxx.RFD (.LFD) 7 ̋Horizontal Rim Lock Full Dummy 4.4 5.25˝ 349 3665632.xxx.R (.L, .RR, .LR) 7˝ Horizontal Rim Lock Privacy 4.8 5.25˝ 778 8125634.xxx.R (.L, .RR, .LR) 7˝ Horizontal Rim Lock Entrance 5.5 5.25˝ 842 8985634.xxx.RFD (.LFD) 7˝ Horizontal Rim Lock Entrance 5.5 5.25˝ 421 449

5701.xxx.R (.L, .RR, .LR) Small Horizontal Rim Lock Passage 3.8 3.5˝ 636 6705701.xxx.RFD (.LFD) Small Horizontal Rim Lock Full Dummy 3.8 3.5˝ 318 3355702.xxx.R (.L, .RR, .LR) Small Horizontal Rim Lock Privacy 4.2 3.5˝ 750 7845702.xxx.RFD (.LFD) Small Vertical Rim Lock Full Dummy 3.7 3.5˝ 375 3925704.xxx.R (.L, .RR, .LR) Small Horizontal Rim Lock Entrance 4.6 3.5˝ 813 8585704.xxx.RFD (.LFD) Small Horizontal Rim Lock Entrance 4.6 3.5˝ 407 428

Left Hand ShownRight Hand ShownRight Hand Shown

inside trim inside trim inside trim

Full Dummy prepared as a strike for all function rim locks

outside trim6755.xxx Cylinder Cover (Entrance only) 5030.xxx Knob 5002.xxx Rose

203

rim locks – EntrancE, spEcial Function

5636.xxx Bevelled rim lockCASE: 5˝ × 7.25˝ × .875˝ KEEPER: 5˝ × 1.375˝ × 1.625˝BACKSET: 5.25˝ TO BIT KEY: 4˝FRONT TO CYLINDER CENTERLINE: 3˝Latch bolt by knob either sideDead bolt by key outside and slide bolt inside or bit keyINCLUDED: 8333 Cylinder6755 Cylinder Cover Plate5755 Bit key Key can be permanently fitted at extra charge5030 Knobs – pair5002 Rose – half pair

031, 033, 034 038. 040, 050 060, 102, 112 003 150, 151, 190 055Item # Description Function Wt. Backset 260, 264 056

5636.xxx.R (.L, .RR, .LR) Bevelled Rim Lock Entrance 7.2 5.25˝ $1,127 1,2065636.xxx.RFD (.LFD) Bevelled Rim Lock Entrance 7.2 5.25˝ 563 6045639.xxx.R (.L, .RR, .LR) Hollow Metal Doors Rim Lock Entrance 7.2 5.25˝ 1,127 1,2065639.xxx.RFD (.LFD) Hollow Metal Doors Rim Lock Entrance 7.2 5.25˝ 563 6045644.xxx.R (.L, .RR, .LR) Horizontal Cylinder Lock Entrance 7.9 8˝ 1,127 1,2065644.xxx.RFD (.LFD) Horizontal Cylinder Lock Entrance 7.9 8˝ 563 6045720.xxx.R (.L, .RR, .LR) Entrance Door Rim Lock Entrance 7.8 3.5˝ 1,127 1,2065720.xxx.RFD (.LFD) Entrance Door Rim Lock Entrance 7.8 3.5˝ 563 6045722.xxx Entrance Door Rim Lock Outside only x 3.5˝ 327 3895723.xxx.R (.L) Entrance Door Rim Lock Inside only x 3.5˝ 869 892

5639.xxx – Hollow metal door rim lockCASE: 4˝ × 6.75˝ × .875˝ KEEPER: 4˝ × .875˝ × 1.625˝LOCK PLATE: 4˝ × 6.25˝BACKSET: 5.25˝ TO BIT KEY: 4˝FRONT TO CYLINDER CENTERLINE: 3˝notE: For 1.75˝ thick doors onlySpecially fabricated lock plate for metal clad doorsLatch bolt by knob either sideDead bolt by key outside and slide bolt inside or bit keyINCLUDED: 8333 Cylinder6755 Cylinder Cover Plate5755 Bit key Key can be permanently fitted at extra charge0579 Filler Plate5629 Lock Plate5030 Knobs – pair

INSIDE

5644.xxx – Horizontal cylinder lockCASE: 5.75˝ × 10˝ × .875˝ KEEPER: 5.75˝ × .875˝ × 1.625˝BACKSET: 8˝ TO BIT KEY: 6˝FRONT TO CYLINDER CENTERLINE: 5˝Latch bolt by knob either sideDead bolt by key outside and slide bolt inside or bit keyINCLUDED: 8333 Cylinder6755 Cylinder Cover Plate5755 Bit key Key can be permanently fitted at extra charge5030 Knobs – pair5002 Rose – half pair

5720.xxx – Entrance door rim lockCASE: 3.75˝ × 4.75˝ × .875˝ KEEPER: 3.75˝ × .875˝ × 1.625˝BACKSET: 3.5˝ FRONT TO CYLINDER CENTERLINE: 2.75˝notE: For 1.75˝ - 2˝ thick doors onlyLatch bolt by knob either sideDead bolt by key outside and slide bolt inside

Unusual combination of classic colonial “Pitcher Handle” sectional trim outside with Early American rim lock inside. Thumb piece operates latch and can be locked by turning cylinder key from outside or sliding dead bolt from inside.INCLUDED: 5722 Outside Trim – Pitcher Handle5723 Inside Trim – Rim Lock8333 Cylinder5030 Knob – half pair

OUTSIDE

RIM LOCKS ARE NOT REVERSIBLE – SPECIFY HAND OF DOORS IMPORTANT: A dummy trim rim lock must be used on ALL pairs of reverse bevel doors Bit Key can be permanently fitted at an extra charge of $10 (add ‘BIT’ to end of suffix: eg. 5600.xxx.R becomes 5600.xxx.RBIT)

inside trim

inside trim

205

rim locks – trim 031, 033, 034 038, 040, 050 060, 102, 112 003 150, 151, 190 055Item # Description Fits 260, 264 0565601.xxx Keeper (Standard Strike) 5600, 5602, 56045631.xxx Keeper (Standard Strike) 5630, 5632, 5634, 5639 $67 725641.xxx Keeper (Standard Strike) 56445671.xxx Keeper (Standard Strike) 5701, 5702, 5704, 5720

5603.xxx Reverse Bevel Keeper (Strike) 5600, 5602, 5604 5628.xxx Reverse Bevel Keeper (Strike) 5630, 5632, 5634, 5639 $57 625642.xxx Reverse Bevel Keeper (Strike) 5644 5672.xxx Reverse Bevel Keeper (Strike) 5701, 5702, 5704, 5720

5606.xxx Scuff Plate 5600, 5602, 5604 5633.xxx Scuff Plate 5630, 5632, 5634, 5639 $57 625643.xxx Scuff Plate 5644 5673.xxx Scuff Plate 5701, 5702, 5704, 5720

5608.xxx Exterior Lock Plate 5604 5626.xxx Exterior Lock Plate 5634, 5636 $125 1365629.xxx Exterior Lock Plate 5639 5674.xxx Exterior Lock Plate 5704

scuff plates Fits rim locksRecommended on reverse bevel doors. Prevents damage to doors and latch bolts. Provides smoother lock operation.5606 4.75˝ × 1.875˝ 5600, 5602, 5604 5633 4˝ × 1.875˝ 5630, 5632, 5634, 5639 5643 5.75˝ × 1.875˝ 5644 5673 3.75˝ × 1.875˝ 5701, 5702, 5704, 5720

5608-5674.xxx – Exterior only lock plate

item # door handing door plate prep size Fits rim lock5608.xxx.RSKC (.LSKC)* R or L S (Single) KC 4.75˝ × 3.25˝ 5604 5626.xxx.RSKC (.LSKC)** R or L S KC 4˝ × 6.25˝ 5634, 5636 5629.xxx.RSKC (.LSKC) R or L S KC 4˝ × 6.25˝ 5639 5674.xxx.RSKC (.LSKC)* R or L S KC 3.75˝ × 4.25˝ 5704

*Does not include and cannot accommodate 6755 Swing Cover**Beveled trim for 5626 lock plate is not available.

5626 & 5629 PLATES: 6755 Cylinder Cover Plate is secured to plateNOTE: Rose and Cylinder trim furnished with cylinder function rim locks not used w/ Lock PlateTHICKNESS: .093˝

Knob trim NOT includedIncluded with Cylinder-function Rim Lock

rim lock keepers (strikes) Fits rim locks 5601 4.75˝ x.875˝ x 1.625˝ 5600, 5602, 5604 5631 4˝ x .875˝ x 1.625˝ 5630, 5632, 5634, 5639 5641 5.75˝ x .875˝ x 1.625˝ 5644 5671 3.75˝ x .875˝ x 1.625˝ 5701, 5702, 5704, 5720

reverse Bevel keepers (strikes) Fits rim locks5603 4.75˝ × 1˝ × .375˝ 5600, 5602, 5604 5628 4˝ × 1˝ × .375˝ 5630, 5632, 5634, 5639 5642 5.75˝ × 1˝ × .375˝ 5644 5672 3.75˝ × 1˝ × .375˝ 5701, 5702, 5704, 5720

205

0406.xxx – colonial Emergency release trim & keySIZE: 2.312˝ × .687˝ (59 × 17mm).

5758.xxx – solid Brass spacerDesigned for use with knob trim during installation on rim lock case. Furnished standard with all rim lock sets.

6755.xxx – cylinder cover plate SIZE: 2.375˝ × 1.625˝ (60 × 41mm)FEATURES: For use with all standard rim lock cylinders (except 5704 Rim Lock)

6755.xxx.001-3 – Blocking ringsFor 6755 Cylinder Cover Plate only

5753.xxx – Emergency release keySIZE: 4˝ (102mm) long.Designed for use with Privacy Rim and Mortise Lock

rim locks – accEssoriEs 030, 031, 033, 034 038, 040, 050 060, 102, 112 003 150, 151, 190 055Item # Description 260, 264 0560406.xxx Colonial Emergency Release Trim & Key $33 365753.xxx Emergency Release Key 30 325754.xxx Key Plate 14 185755.xxx Bit Key 32 365758.xxx Solid Brass Spacer 10 12

6755.xxx Cylindar Lock Cover Plate 85 986755.xxx.001 1/16˝ Blocking Ring – 6755 only (040 finish only) 86755.xxx.002 3/32˝ Blocking Ring – 6755 only (040 finish only) 86755.xxx.003 1/8˝ Blocking Ring – 6755 only (040 finish only) 88314.xxx Wrought Cylinder Collar for Rim Locks 10 12

5754.xxx – key plateSIZE: 2˝ × 1.125˝ (51 × 29mm).Key Plate

5755.xxx Bit keySIZE: 4˝ (102mm) long.FEATURES: Fits all Baldwin rim locks. Can be permanently fitted with locks to prevent unauthorized removal.

8314.xxx – wrought cylinder collar for rim locks

207

baldwin bronze

THE TIMELESS APPEAL of bronze, now in a full line

of home hardware from Baldwin. Like sculpture for

the home, the new Baldwin Bronze collection means

distinctive style and classic Baldwin quality.

> Hand Cast Bronze> New Toscana™ and Stonebridge™ Handlesets> Matching Knob/Lever and Rose Styles > Pre-attached Knobs/Levers for Fast Installation> Coordinating General Hardware and Bath> All Available in Light or Dark Bronze Finishes

Stonebridge™ HandlesetToscana™ Handleset

207

knoBs – BronzEAll KEYED ENTRY: provided with adjustable backset latch; for 1-3/8˝ to 1-3/4˝ doors, except where noted.All PASSAGE & PRIVACY: provided with non-adjustable 2-3/8˝ backset latch for 1-3/8˝ or 1-3/4˝ doors, except where noted. 2-1/8˝ bore.special keying not available for Bronze Hardware

Item # Function Wt. 469, 471

K501.xxx.IDCBO Half Dummy 3.5 $110

K501.xxx.FDCBO Full Dummy 5.0 220

K501.xxx.PSCBO Passage – 2 3/8˝ backset 6.0 260

K501.xxx.PVCBO Privacy – 2 3/8˝ backset 6.0 260


K511.xxx.IDCBO Half Dummy 3.5 $110

K511.xxx.FDCBO Full Dummy 5.0 220

K511.xxx.PSCBO Passage – 2 3/8˝ backset 6.0 260

K511.xxx.PVCBO Privacy – 2 3/8˝ backset 6.0 260

K511.xxx.FD kEyEd Full Dummy 5.0 250

K511.xxx.ENTR kEyEd Emergency Exit 6.0 275


K511.xxx.IDCBN Half Dummy 3.5 $110

K511.xxx.FDCBN Full Dummy 5.0 220

K511.xxx.PSCBN Passage – 2 3/8˝ backset 6.0 260

K511.xxx.PVCBN Privacy – 2 3/8˝ backset 6.0 260


K521.xxx.IDCBA Half Dummy 3.5 $110

K521.xxx.FDCBA Full Dummy 5.0 220

K521.xxx.PSCBA Passage – 2 3/8˝ backset 6.0 260

K521.xxx.PVCBA Privacy – 2 3/8˝ backset 6.0 260


K531.xxx.IDCBA Half Dummy 3.5 $110

K531.xxx.FDCBA Full Dummy 5.0 220

K531.xxx.PSCBA Passage – 2 3/8˝ backset 6.0 260

K531.xxx.PVCBA Privacy – 2 3/8˝ backset 6.0 260


K531.xxx.IDCBN Half Dummy 3.5 $110

K531.xxx.FDCBN Full Dummy 5.0 220

K531.xxx.PSCBN Passage – 2 3/8˝ backset 6.0 260

K531.xxx.PVCBN Privacy – 2 3/8˝ backset 6.0 260

K531.xxx.FD kEyEd Full Dummy 5.0 250

K531.xxx.ENTR kEyEd Emergency Exit 6.0 275

2.6˝ .6˝.6˝

.6˝

.5˝

.5˝

.6˝

6.4˝

3.8˝

2.8˝2.8˝

3.7˝3.7˝

2.6˝

2.6˝

2.6˝

2.6˝

2.6˝

4.4˝

3.4˝3.4˝

.7˝3.0˝

8.0˝

4.0˝

2.2˝3.5˝

14.3˝

2.6˝

2.75˝

3.1˝

3.7˝

.5˝2.9˝ 2.7˝

3.7˝2.75˝

.5˝

2.75˝

2.75˝

2.75˝ 2.75˝

3.1˝

2.7˝4.0˝

2.8˝

2.3˝

.5˝

.5˝

.5˝

2.9˝

4.5˝

13.6˝

3.0˝

2.7˝

2.8˝

2.25˝

2.6˝2.6˝

2.6˝

2.3˝4.5˝

5.7˝

.6˝ .6˝.6˝

.5˝ .5˝

3.6˝ 3.6˝

3.6˝ 3.6˝

.6˝

.6˝

3.1˝

8.25˝

3.8˝2.375˝

Filigree knob w/ oval rose PASSAGE, PRIVACY & DUMMY

Egg knob w/ oval rose PASSAGE, PRIVACY & DUMMY

Egg knob w/ round rose PASSAGE, PRIVACY & DUMMY

Bevel top knob w/ arched rose PASSAGE, PRIVACY & DUMMY

classic knob w/ arched rose PASSAGE, PRIVACY & DUMMY

classic knob w/ round rose PASSAGE, PRIVACY & DUMMY

KEYED ENTRY

KEYED ENTRY

2.6˝

2.6˝

2.8˝

2.5˝4.2˝

2.3˝

.5˝

.5˝

3.6˝

3.6˝

2.75˝

2.75˝

2.75˝ 2.75˝

3.1˝

2.7˝4.0˝

2.8˝

2.3˝

.5˝

.5˝

.5˝

2.75˝

2.75˝

2.75˝ 2.75˝

3.1˝

2.7˝4.0˝

2.8˝

2.3˝

.5˝

.5˝

.5˝

4.3˝ 2.7˝

2.4˝

.5˝

2.6˝

2.75˝

2.75˝

.5˝

209

All KEYED ENTRY: provided with adjustable backset latch; for 1-3/8˝ to 1-3/4˝ doors, except where noted.All PASSAGE & PRIVACY: provided with non-adjustable 2-3/8˝ backset latch for 1-3/8˝ or 1-3/4˝ doors, except where noted. 2-1/8˝ bore.special keying not available for Bronze Hardware

lEvErs – BronzE


L501.xxx.RDCBO Half Dummy – RH 3.5 $110L501.xxx.LDCBO Half Dummy – LH

L501.xxx.RFDCBO Full Dummy – RH 5.0 220L501.xxx.LFDCBO Full Dummy – LH

L501.xxx.RPSCBO Passage – RH, 2 3/8˝ backset 6.0 260L501.xxx.LPSCBO Passage – LH, 2 3/8˝ backset

L501.xxx.RPVCBO Privacy – RH, 2 3/8˝ backset 6.0 260L501.xxx.LPVCBO Privacy – LH, 2 3/8˝ backset


L511.xxx.RDCBO Half Dummy – RH 3.5 $110L511.xxx.LDCBO Half Dummy – LH

L511.xxx.RFDCBO Full Dummy – RH 5.0 220L511.xxx.LFDCBO Full Dummy – LH

L511.xxx.RPSCBO Passage – RH, 2 3/8˝ backset 6.0 260L511.xxx.LPSCBO Passage – LH, 2 3/8˝ backset

L511.xxx.RPVCBO Privacy – RH, 2 3/8˝ backset 6.0 260L511.xxx.LPVCBO Privacy – LH, 2 3/8˝ backset


L511.xxx.RDCBN Half Dummy – RH 3.5 $110L511.xxx.LDCBN Half Dummy – LH

L511.xxx.RFDCBN Full Dummy – RH 5.0 220L511.xxx.LFDCBN Full Dummy – LH

L511.xxx.RPSCBN Passage – RH, 2 3/8˝ backset 6.0 260L511.xxx.LPSCBN Passage – LH, 2 3/8˝ backset

L511.xxx.RPVCBN Privacy – RH, 2 3/8˝ backset 6.0 260L511.xxx.LPVCBN Privacy – LH, 2 3/8˝ backset

L511.xxx.RFD kEyEd Full Dummy – RH 5.0 250L511.xxx.LFD kEyEd Full Dummy – LH

L511.xxx.RENT kEyEd Emergency Exit – RH 6.0 275L511.xxx.LENT kEyEd Emergency Exit – LH


L521.xxx.RDCBA Half Dummy – RH 3.5 $110L521.xxx.LDCBA Half Dummy – LH

L521.xxx.RFDCBA Full Dummy – RH 5.0 220L521.xxx.LFDCBA Full Dummy – LH

L521.xxx.RPSCBA Passage – RH, 2 3/8˝ backset 6.0 260L521.xxx.LPSCBA Passage – LH, 2 3/8˝ backset

L521.xxx.RPVCBA Privacy – RH, 2 3/8˝ backset 6.0 260L521.xxx.LPVCBA Privacy – LH, 2 3/8˝ backset


L531.xxx.RDCBA Half Dummy – RH 3.5 $110L531.xxx.LDCBA Half Dummy – LH

L531.xxx.RFDCBA Full Dummy – RH 5.0 220L531.xxx.LFDCBA Full Dummy – LH

L531.xxx.RPSCBA Passage – RH, 2 3/8˝ backset 6.0 260L531.xxx.LPSCBA Passage – LH, 2 3/8˝ backset

L531.xxx.RPVCBA Privacy – RH, 2 3/8˝ backset 6.0 260L531.xxx.LPVCBA Privacy – LH, 2 3/8˝ backset

L531.xxx.RFD kEyEd Full Dummy – RH 5.0 250L531.xxx.LFD kEyEd Full Dummy – LH

L531.xxx.RENT kEyEd Emergency Exit – RH 6.0 275L531.xxx.LENT kEyEd Emergency Exit – LH

2.6˝ .6˝.6˝

.6˝

.5˝

.5˝

.6˝

6.4˝

3.8˝

2.8˝2.8˝

3.7˝3.7˝

2.6˝

2.6˝

2.6˝

2.6˝

2.6˝

4.4˝

3.4˝3.4˝

.7˝3.0˝

8.0˝

4.0˝

2.2˝3.5˝

14.3˝

2.9˝

4.5˝

13.6˝

3.0˝

2.7˝

2.8˝

2.25˝

2.6˝2.6˝

2.6˝

2.3˝4.5˝

5.7˝

.6˝ .6˝.6˝

.5˝ .5˝

3.6˝ 3.6˝

3.6˝ 3.6˝

.6˝

.6˝

3.1˝

8.25˝

3.8˝2.375˝

2.6˝

2.6˝

2.8˝

2.5˝4.2˝

2.3˝

.5˝

.5˝

3.6˝

3.6˝

3.1˝

4.3˝2.7˝

4.3˝

.5˝

Filigree lever w/ oval rose PASSAGE, PRIVACY & DUMMY

wave lever w/ oval rose PASSAGE, PRIVACY & DUMMY

wave lever w/ round rose PASSAGE, PRIVACY & DUMMY

KEYED ENTRY

KEYED ENTRY

Ball tip lever w/ arched rose PASSAGE, PRIVACY & DUMMY

paddle lever w/ arched rose PASSAGE, PRIVACY & DUMMY

2.75˝

2.75˝

2.75˝ 2.75˝

3.1˝

2.7˝4.0˝

2.8˝

2.3˝

.5˝

.5˝

.5˝

4.0˝

2.6˝

2.7˝

.5˝

3.7˝

4.3˝ 2.7˝

2.4˝

.5˝

2.6˝

2.75˝

2.75˝

.5˝

209


T501.xxx.ENTR Single cylinder set w/ Filigree Knob

T521.xxx.RENT Single cylinder set w/ Filigree Lever – RH Entry 19 $589

T521.xxx.LENT Single cylinder set w/ Filigree Lever – LH Entry

T501.xxx.DBLC Double cylinder set w/ Filigree Knob

T521.xxx.RDBL Double cylinder set w/ Filigree Lever – RH Entry 19 $632

T521.xxx.LDBL Double cylinder set w/ Filigree Lever – LH Entry

T501.xxx.FD Full Dummy set w/ Filigree Knob

T521.xxx.RFD Full Dummy set w/ Filigree Lever – RH Entry 15 $505

T521.xxx.LFD Full Dummy set w/ Filigree Lever – LH Entry


T503.xxx.ENTR Single cylinder set w/ Filigree Knob

T523.xxx.RENT Single cylinder set w/ Filigree Lever – RH Entry 19 $655

T523.xxx.LENT Single cylinder set w/ Filigree Lever – LH Entry

T503.xxx.DBLC Double cylinder set w/ Filigree Knob

T523.xxx.RDBL Double cylinder set w/ Filigree Lever – RH Entry 19 $705

T523.xxx.LDBL Double cylinder set w/ Filigree Lever – LH Entry

T503.xxx.FD Full Dummy set w/ Filigree Knob

T523.xxx.RFD Full Dummy set w/ Filigree Lever – RH Entry 15 $556

T523.xxx.LFD Full Dummy set w/ Filigree Lever – LH Entry

2.6˝ .6˝.6˝

.6˝

.5˝

.5˝

.6˝

6.4˝

3.8˝

2.8˝2.8˝

3.7˝3.7˝

2.6˝

2.6˝

2.6˝

2.6˝

2.6˝

4.4˝

3.4˝3.4˝

.7˝3.0˝

8.0˝

4.0˝

2.2˝3.5˝

14.3˝2.6˝ .6˝

.6˝

.6˝

.5˝

.5˝

.6˝

6.4˝

3.8˝

2.8˝2.8˝

3.7˝3.7˝

2.6˝

2.6˝

2.6˝

2.6˝

2.6˝

4.4˝

3.4˝3.4˝

.7˝3.0˝

8.0˝

4.0˝

2.2˝3.5˝

14.3˝

.6˝.6˝ .6˝

.6˝

3.0˝ 3.0˝ 3.0˝

18.8˝

2.25˝

8.0˝

11.4˝ 11.4˝

2.6˝

11.4˝

3.8˝

3.5˝

2.9˝ 4.4˝2.9˝.6˝

.6˝ .6˝

.6˝

3.0˝ 3.0˝ 3.0˝

18.8˝

2.25˝

8.0˝

11.4˝ 11.4˝

2.6˝

11.4˝

3.8˝

3.5˝

2.9˝ 4.4˝2.9˝

t501.xxx.ENTR

t503.xxx.ENTR

t521.xxx.LENTor .RENT

t523.xxx.LENTor .RENT

toscana sectional trim set w/ K501 Filigree Knob or L501 Filigree Lever

toscana 3/4 Escutcheon trim set w/ K501 Filigree Knob or L501 Filigree Lever

special keying not available for Bronze Hardware

211

HandlEsEts – BronzE


T541.xxx.ENTR Single cylinder set w/ Bevel Top Knob

T561.xxx.RENT Single cylinder set w/ Ball Tip Lever – RH Entry 19 $589

T561.xxx.LENT Single cylinder set w/ Ball Tip Lever – LH Entry

T541.xxx.DBLC Double cylinder set w/ Bevel Top Knob

T561.xxx.RDBL Double cylinder set w/ Ball Tip Lever – RH Entry 19 $632

T561.xxx.LDBL Double cylinder set w/ Ball Tip Lever – LH Entry

T541.xxx.FD Full Dummy set w/ Bevel Top Knob

T561.xxx.RFD Full Dummy set w/ Ball Tip Lever – RH Entry 15 $505

T561.xxx.LFD Full Dummy set w/ Ball Tip Lever – LH Entry

2.9˝

4.5˝

13.6˝

3.0˝

2.7˝

2.8˝

2.25˝

2.6˝2.6˝

2.6˝

2.3˝4.5˝

5.7˝

.6˝ .6˝.6˝

.5˝ .5˝

3.6˝ 3.6˝

3.6˝ 3.6˝

.6˝

.6˝

3.1˝

8.25˝

3.8˝2.375˝

2.9˝

4.5˝

13.6˝

3.0˝

2.7˝

2.8˝

2.25˝

2.6˝2.6˝

2.6˝

2.3˝4.5˝

5.7˝

.6˝ .6˝.6˝

.5˝ .5˝

3.6˝ 3.6˝

3.6˝ 3.6˝

.6˝

.6˝

3.1˝

8.25˝

3.8˝2.375˝

t541.xxx.ENTR t561.xxx.LENTor .RENT

stonebridge sectional arched trim set w/ K521 Bevel Top Knob or L521 Ball Tip Lever





















.6˝

3.0˝3.0˝

8.25˝

2.25˝

3.0˝

2.9˝4.5˝

3.8˝

19.1˝

.6˝.6˝

11.7˝11.7˝

2.4˝

.6˝ .6˝.6˝

.6˝

3.0˝3.0˝ 3.0˝

19.0˝

8.25˝

11.7˝

2.9˝

11.7˝ 11.7˝

3.1˝

4.5˝

3.8˝2.375˝

2.25˝

2.4˝

.6˝

3.0˝3.0˝

8.25˝

2.25˝

3.0˝

2.9˝4.5˝

3.8˝

19.1˝

.6˝.6˝

11.7˝11.7˝

2.4˝

.6˝

3.0˝3.0˝

8.25˝

2.25˝

3.0˝

2.9˝4.5˝

3.8˝

19.1˝

.6˝.6˝

11.7˝11.7˝

2.4˝



stonebridge 3/4 Escutcheon arched trim set w/ K521 Bevel Top Knob or L521 Ball Tip Lever

stonebridge Full Escutcheon arched trim set w/ K521 Bevel Top Knob or L521 Ball Tip Lever


211

dEadBolts – BronzE


D521.xxx.1 Arched Single Cylinder Deadbolt 3.0 158

D521.xxx.2 Arched Double Cylinder Deadbolt 3.0 188


D501.xxx.1 Oval Single Cylinder Deadbolt 3.0 158

D501.xxx.2 OvalDeadbolt w/cylinder cover 3.0 188


D511.xxx.1 Round Single Cylinder Deadbolt 3.0 140

D511.xxx.2 Round Deadbolt - no cyl cover 3.0 160

2.6˝ .6˝.6˝

.6˝

.5˝

.5˝

.6˝

6.4˝

3.8˝

2.8˝2.8˝

3.7˝3.7˝

2.6˝

2.6˝

2.6˝

2.6˝

2.6˝

4.4˝

3.4˝3.4˝

.7˝3.0˝

8.0˝

4.0˝

2.2˝3.5˝

14.3˝

2.6˝ .6˝.6˝

.6˝

.5˝

.5˝

.6˝

6.4˝

3.8˝

2.8˝2.8˝

3.7˝3.7˝

2.6˝

2.6˝

2.6˝

2.6˝

2.6˝

4.4˝

3.4˝3.4˝

.7˝3.0˝

8.0˝

4.0˝

2.2˝3.5˝

14.3˝

2.6˝ .6˝.6˝

.6˝

.5˝

.5˝

.6˝

6.4˝

3.8˝

2.8˝2.8˝

3.7˝3.7˝

2.6˝

2.6˝

2.6˝

2.6˝

2.6˝

4.4˝

3.4˝3.4˝

.7˝3.0˝

8.0˝

4.0˝

2.2˝3.5˝

14.3˝

2.6˝ .6˝.6˝

.6˝

.5˝

.5˝

.6˝

6.4˝

3.8˝

2.8˝2.8˝

3.7˝3.7˝

2.6˝

2.6˝

2.6˝

2.6˝

2.6˝

4.4˝

3.4˝3.4˝

.7˝3.0˝

8.0˝

4.0˝

2.2˝3.5˝

14.3˝

2.9˝

4.5˝

13.6˝

3.0˝

2.7˝

2.8˝

2.25˝

2.6˝2.6˝

2.6˝

2.3˝4.5˝

5.7˝

.6˝ .6˝.6˝

.5˝ .5˝

3.6˝ 3.6˝

3.6˝ 3.6˝

.6˝

.6˝

3.1˝

8.25˝

3.8˝2.375˝

2.9˝

4.5˝

13.6˝

3.0˝

2.7˝

2.8˝

2.25˝

2.6˝2.6˝

2.6˝

2.3˝4.5˝

5.7˝

.6˝ .6˝.6˝

.5˝ .5˝

3.6˝ 3.6˝

3.6˝ 3.6˝

.6˝

.6˝

3.1˝

8.25˝

3.8˝2.375˝

2.9˝

4.5˝

13.6˝

3.0˝

2.7˝

2.8˝

2.25˝

2.6˝2.6˝

2.6˝

2.3˝4.5˝

5.7˝

.6˝ .6˝.6˝

.5˝ .5˝

3.6˝ 3.6˝

3.6˝ 3.6˝

.6˝

.6˝

3.1˝

8.25˝

3.8˝2.375˝

2.9˝

4.5˝

13.6˝

3.0˝

2.7˝

2.8˝

2.25˝

2.6˝2.6˝

2.6˝

2.3˝4.5˝

5.7˝

.6˝ .6˝.6˝

.5˝ .5˝

3.6˝ 3.6˝

3.6˝ 3.6˝

.6˝

.6˝

3.1˝

8.25˝

3.8˝2.375˝

2.5˝ 2.5˝

1.7˝.6˝ .6˝

2.5˝ 2.5˝

1.7˝.6˝ .6˝

oval deadbolt – 2 1/8˝ or 1 5/8˝ door prep

round deadbolt – 2 1/8˝ door prep

arched deadbolt – 2 1/8˝ or 1 5/8˝ door prep

Item # Description QTY LIST

85624.000.35BIT NO.2 3-1/2˝ Bit Extender box of 5 $25

3.5˝ Bit Extender


213

8000 sEriEsLOW PROFILE CYLINDER DEADBOLT FOR 1-5/8˝ (41mm) DOOR PREP

All deadbolts feature a 1/2˝ low-profile cylinder projection.

CASE: Deadbolt case is formed of heavy gauge steel for strength and assures solid fit in door preparations. Most interior working parts are made of solid brass for maximum strength and smooth operation.

DEADBOLT: All deadbolts are of solid brass construction. Deadbolt has .600˝ x .770˝ x 1˝ (15 x 20 x 25mm) throw when extended and a hardened steel insert for maximum protection and security. Deadbolt is furnished in 040 and 264 finishes to match trim.

GRADE 1: Meets Grade 1 Requirements as set forth in ANSI A156.5 Test Sections 9.1–9.11 & 10.1–10.9.

BACKSET: Adjustable backset deadbolt 2-3/8˝ (60mm) or 2-3/4˝ (70mm).

NON-HANDED design facilitates specification and installation.

STRIKE: Every deadbolt illustrated in this section is furnished with a specially-designed reinforcing strike constructed of high grade steel for ultimate strength and durability. The strike is installed with four (4) security jamb screws (including two (2) 3˝ screws) and a dust box and is covered with an armored front to conceal the fasteners. The 3˝ screws securing the reinforcing strike resist tampering and guard against theft.

CYLINDERS: The cylinder housing is protected with a free-turning exterior cylinder guard fabricated from solid brass to resist gripping or twisting. Cylinders are supplied standard with 03 keyway and two nickel silver keys. All deadbolts are furnished with 5-pin keying.

KEYING: All deadbolts are available Keyed Alike in Sets of Four (KAS4) in any configuration, provided that no specific key numbers are requested. Keep in mind that the total quantity of deadbolts ordered must be a multiple of the keyed alike quantity. Contact factory for keying to a specific key number.

imagEs – dEadBolt sEts, mEcHanical FEaturEs

8000 sEriEs, continuedKEYS are designed with a 1.25˝ (32mm) wide bow surface.

PACKAGING: Packaged one deadbolt per box with security strike, dust box and keys. Deadbolts are also available Keyed Alike in Sets of Four (KAS4). All products are packaged in contractor packaging unless noted.

WEIGHT: 1.8 lbs. each (.81kg); 10.8 lbs. (4.86kg) per case for standard package.

DOOR CONDITIONS: Deadbolts fit 1-5/8˝ (41mm) diameter cutouts. Trim rings No. 8090 available for doors drilled with 2-1/8˝ (54mm) diameter holes.

DOOR THICKNESS: Deadbolts fit 1-3/4˝ (44mm) thick doors. Deadbolt kits are available for 2˝ (51mm) and 2-1/4˝ (57mm) thick doors at an additional charge. Door spacers No. 8097 are required for 1-3/8˝ (35mm) thick doors.

8200 sEriEsLOW PROFILE CYLINDER DEADBOLT FOR 2-1/8˝ (54mm) DOOR PREP

All information identical to 8000 SERIES except where noted here

WEIGHT: 2.2 lbs. each (.99kg); 13.2 lbs. per case (5.94kg); KAS4 8.8 lbs. (4.0kg).

DOOR CONDITIONS: Deadbolts fit 2 1/8˝ (54mm) diameter cutouts.

DOOR THICKNESS: Deadbolts fit 1-3/4˝ (44mm) thick doors. Deadbolt kits are available for 2˝ (51mm) and 2-1/4˝ (57mm) thick doors at an additional charge. Door spacers No. 8297 are required for 1-3/8˝ (35mm) thick doors.

8244.xxx8244s.xxx – stainless steel

contemporary deadbolt – 2 1/8˝ door prep

imagEs – dEadBolts

UL certified tubular products can be ordered by adding a UL kit to our standard deadbolt or select Estate or Images passage or privacy sets. Our UL products are rated a 3hr fire rating when used on fire rated doors.

ul dEadBolts kitwitH EacH kit, you gEt tHE Following:

Deadbolt latch with UL faceplate, UL Shield and rotation stop

ordEring instructions arE as Follows:

1. Choose your deadbolt: eg. 8231.003 - Traditional Deadbolt, single cylinder, 2-1/8” door prep2. Choose the appropriate deadbolt kit: U8201.003.DB – UL kit for single cylinder, 2 1/8” door prep

031, 033, 034, 038 040, 050, 060 102, 112, 150, 151 Item # Function 152, 190, 260, 264 003, 055, 056

U8201.xxx.DB UL Kit for single cylinder deadbolt - 2 1/8” door prep $25 30

U8202.xxx.DB UL Kit for double cylinder deadbolt - 2 1/8” door prep 25 30

U8208.xxx.DB UL Kit for single cylinder deadbolt - 1 5/8” door prep 25 30

U8209.xxx.DB UL Kit for double cylinder deadbolt - 1 5/8” door prep 25 30

For 402, 412, or 452 finishes, please substitute with a 102, 112, or 152 finish respectively.

otHEr ExamplEs:

8041.260 – Contemporary deadbolt, single cylinder, 1-5/8” door prepU8208.260.DB – UL kit for single cylinder, 1-5/8” door prep8238.112 – Bethpage deadbolt, double cylinder, 2-1/8” door prepU8202.112.DB – UL kit for double cylinder, 2-1/8” door prepNote: All components from the deadbolt kit must be installed for UL certification.

031, 033, 034, 038 040, 050, 060 003, 055 102, 112, 150, 151 056, 402 Item # Function 152, 190, 260, 264 412, 452

8244.xxx Single cylinder deadbolt 2.0 $121 126

8244.xxx.KAS4 Single cylinder deadbolt - keyed alike set of 4 8.5 484 504

8244.xxx.PAT Single cylinder deadbolt 1.2 100 105

notE: not available as a double cylinder. also not available for 1 3/8” thick doors.STEEL CASE: .960˝ Dia. x 3.312˝ or 3.750˝ extended (24 x 84 or 95mm)FRONT: .156˝ x 1˝ x 2.25˝ (4 x 25 x 57mm)

Item # Function Wt. 102, 112, 151 320, 324

8244S.xxx Single cylinder deadbolt (stainless steel) 1.9 121 126

8244S.xxx.KAS4 Single cylinder deadbolt - keyed alike set of 4 (stainless steel) 8.7 484 504

8244S.xxx.PAT Patio deadbolt (stainless steel) 1.1 100 105

included with each kit:Deadbolt latch with UL faceplate, UL Shield and rotation stop

.5˝

2.6˝

213



8011.xxx

8041.xxx

traditional deadbolt – 1 5/8˝ door prep

8242.xxx

8241.xxx

8021.xxx

8031.xxx


8241.xxx .pat

031, 033, 034, 038 040, 050, 060 003, 055 102, 112, 150, 151 056, 402 Item # Function 152, 190, 260, 264 412, 452

8011.xxx Double cylinder deadbolt 1.9 $101 108

8011.xxx.KAS4 Double cylinder deadbolt - keyed alike set of 4 8.1 404 432

8041.xxx Single cylinder deadbolt 1.7 84 92


STEEL CASE: .960˝ Dia. x 3.312˝ or 3.75˝ extended (24 x 84 or 95mm)FRONT: .156˝ x 1˝ x 2.25˝ (4 x 25 x 57mm)

031, 033, 034, 038 040, 050, 060 003, 055 102, 112, 150, 151 056, 402 Item # Function 152, 190, 260, 264 412, 452





8241.xxx.PAT Patio deadbolt 1.1 62 68


031, 033, 034, 038 040, 050, 060 003, 055 102, 112, 150, 151 056, 402 Item # Function 152, 190, 260, 264 412, 452






patio deadboltnot 2 1/8˝ door prep

.7˝

2.0˝

.5˝.5˝

2˝

.5˝

2.5˝

215

traditional deadbolt – 2 1/8˝ door prep

patio deadboltnot 2 1/8˝ door prep

031, 033, 034, 038 040, 050, 060 003, 055 102, 112, 150, 151 056, 402 Item # Function 152, 190, 260, 264 412, 452





8231.xxx.PAT Patio deadbolt 1.1 62 68


8232.xxx

8231.xxx

tahoe deadbolt – 2 1/8˝ or 1 5/8˝ door prep 031, 034, 038, 040 060, 050, 102 003, 055 112, 150, 151 056, 402 Item # Function Wt. 190, 260, 264 412, 452





not availaBlE For 1 3/8” tHick doors.STEEL CASE: .960˝ Dia. x 3.312˝ or 3.750˝ extended (24 x 84 or 95mm)FRONT: .156˝ x 1˝ x 2.25˝ (4 x 25 x 57mm)

8212.xxx

8213.xxx

Bethpagetm deadbolt – 2 1/8˝ door prep 031, 033, 034, 038 040, 050, 060 003, 055 102, 112, 150, 151 056, 402 Item # Function 152, 190, 260, 264 412, 452





2.58(65.0mm)

3.27(83.0mm)

0.60(15.0mm)

0.59(15.0mm)

4.39(112.0mm)

1.32(34.0mm)

12.58(320.0mm)

2.07(53.0mm)

3.14(80.0mm)

3.79(96.0mm)

2.76(70.0mm)

2.58(65.0mm)

3.27(83.0mm)

2.58(65.0mm)

3.27(83.0mm)

7.75(197.0mm)

CTC

not availaBlE For 1 3/8” tHick doors.STEEL CASE: .960˝ Dia. x 3.312˝ or 3.750˝ extended (24 x 84 or 95mm)FRONT: .156˝ x 1˝ x 2.25˝ (4 x 25 x 57mm)COLLAR DIMENSION: 2.63˝W x 3.25˝H x 0.5˝ THICK (66 x 81 x 13mm)

8238.xxx

8237.xxx

8231.xxx .pat


2.58(65.0mm)

3.27(83.0mm)

0.60(15.0mm)

0.59(15.0mm)

4.39(112.0mm)

1.32(34.0mm)

12.58(320.0mm)

2.07(53.0mm)

3.14(80.0mm)

3.79(96.0mm)

2.76(70.0mm)

2.58(65.0mm)

3.27(83.0mm)

2.58(65.0mm)

3.27(83.0mm)

7.75(197.0mm)

CTC

.5˝

2.5˝

215

3.62

2.75.56

2.75 .56

2.75


sohotm deadbolt – 2 1/8˝ door prep 031, 033, 034, 038 040, 050, 060 003, 055 102, 112, 150, 151 056, 402 Item # Function 152, 190, 260, 264 412, 452





8286.xxx

8285.xxx

arched deadbolt – 2 1/8˝ door prep 031, 033, 034, 038 040, 050, 060 003, 055 102, 112, 150, 151 056, 402 Item # Function 152, 190, 260, 264 412, 452





squared deadbolt – 2 1/8˝ door prep 031, 033, 034, 038 040, 050, 060 003, 055 102, 112, 150, 151 056, 402 Item # Function 152, 190, 260, 264 412, 452





8253.xxx

8252.xxx

8255.xxx

8254.xxx

not availaBlE For 1 3/8” tHick doors.STEEL CASE: 8285: .960˝ Dia. x 3.312˝ or 3.750˝ extended (24 x 84 or 95mm)FRONT: .156˝ x 1˝ x 2.25˝ (4 x 25 x 57mm)COLLAR DIMENSION: 2.75˝W x 2.88˝H x 0.5˝ THICK (70 x 73 x 13mm)



2.8˝

2.9˝

.5˝

217

1

2

5

6

8

7

12

13

13

1110

9

4

3

1

2

5

6

8

7

11

13

12

14

10

14

9

4

3

tuBular – dEadBolts, ExplodEd viEws

1. 1 each Adjustable Backset Deadbolt 2. 4 each #8.75˝ Flathead Combination Screws 3. 1 each Outside Cylinder 4. 1 each Outside Cylinder Collar 5. 2 each Keys 6. 1 each Outside Cylinder Tail Piece 7. 1 each Screw Guide 8. 1 each Inside Cylinder 9. 1 each Inside Cylinder Tail Piece 10. 1 each Threaded Collar 11. 2 each #10-32 x 2.25˝ Flat Head Machine Screws 12. 1 each Cylinder Cover 13. 1 each Inside Collar 14. Optional 8090 Trim Rings

double cylinder deadbolt

1. 1 each Adjustable Backset Deadbolt 2. 2 each #8-32 x 3/4˝ Flat Head Machine Screws 3. 1 each Outside Cylinder 4. 1 each Outside Cylinder Collar 5. 2 each Keys 6. 1 each Cylinder Tail Piece 7. 1 each Screw Guide 8. 1 each Turn Knob Mounting Plate 9. 2 each #10-32 x 2’1/4˝ Flat Head Machine Screws 10. 1 each Turn Knob Tail Piece 11. 1 each Turn Knob Trim 12. 2 each #8-32 Oval Head Machine Screws 13. Optional 8090 Trim Rings

single cylinder deadbolt

217

tuBular – HandlEsEt accEssoriEs

G

F

E D

C BA

CYLINDER CAP TOOL

No. 8052.289.00045

WASHER

RETAINING PIN

CYLINDER CAP

A. Cylinder Plug Cap B. Washer C. Tail Piece D. Retaining Pin E. Spring F. Cylinder Plug G. Tumbler Springs

cylinder Exploded view

030, 050, 102 Std. 112, 150, 151 402, 412Item # Function Box Wt. 003 190, 260,264 452

tHick door kits For original mEcHanics5398.xxx.A For Sectional & Escutcheon Entrance (ENTR) function handlesets with Knobs 1 .3 N/A $39 N/A to fit 2˝ & 2 1/4˝ thick doors (except Tahoe®)5398.xxx.B For Sectional & Escutcheon Double Cylinder (DBLC) function handlesets with 1 .4 N/A 39 N/A Knobs to fit 2˝ & 2 1/4˝ thick doors (except Tahoe®)5398.xxx.C For all Emergency Egress handlesets (ENTR, RENT, LENT) to fit 2˝ & 2 1/4˝ thick 1 .4 N/A 42 N/A doors (including Tahoe®) 5398.xxx.D For Sectional, Escutcheon and Emergency Egress Dummy (FD, LRFD) handlesets 1 .1 N/A 11 N/A to fit 2˝ & 2 1/4˝ thick doors (including Tahoe®)5398.xxx.G For Sectional and Escutcheon Entrance (RENT, LENT) function handlesets with Levers 1 .3 N/A 39 N/A to fit 2˝ & 2 1/4˝ thick doors (including Tahoe®)5398.xxx.H For Sectional and Escutcheon Double Cylinder (RDBL, LDBL) function handlesets 1 .4 N/A 39 N/A with Levers to fit 2˝ & 2 1/4˝ thick doors (including Tahoe®)

tHick door kits For nEw mEcHanics5399.xxx.A For all Sectional and Escutcheon Single Cylinder Entrance function handlesets 1 .3 N/A 39 N/A to fit 2˝ & 2 1/4˝ thick door5399.xxx.B For all Sectional and Escutcheon Double Cylinder Entrance handlesets 1 .4 N/A 40 N/A to fit 2˝ & 2 1/4˝ thick doors5399.xxx.C For all Emergency Egress function handlesets to fit 2˝ & 2 1/4˝ thick doors 1 .3 N/A 42 N/A5399.xxx.D For all Full Dummy handle functions—Sectional, Escutcheon and Emergency 1 .1 N/A 11 N/A Egress to fit 2˝ & 2 1/4˝ thick doors

rEpair kits For nEw mEcHanics5399.xxx.G For active Sectional and Escutcheon handlesets (except Tahoe®) with Interior Knobs 1 1.1 39 37 including Single Cylinder (ENTR) and Double Cylinder (DBLC) sets5399.xxx.H For active Sectional and Escutcheon handlesets (except Tahoe®) with Interior Levers 1 1.3 39 37 including Single Cylinder (LHRH) and Double Cylinder (LRDB) sets5399.xxx.I For active Tahoe® Sectional handlesets with Interior Knobs including Single 1 1.2 39 37 Cylinder (ENTR) and Double Cylinder (DBLC) sets5399.xxx.J For active Tahoe® Sectional handlesets with Interior Levers including 1 1.2 39 37 Single Cylinder (LHRH) and Double Cylinder (LRDB) sets5399.xxx.K For Full Dummy (FD or LRFD) Sectional, Escutcheon, and Emergency Egress handlesets 1 .7 29 27 (except Tahoe®) with a Traditional oval thumbpiece including Interior Knobs or Levers5399.xxx.L For Full Dummy (FD or LRFD) Tahoe® handlesets with a rectangular thumbpiece 1 .6 29 27 including Interior Knobs or Levers Use this kit for the following Trim Set: Tahoe®5399.xxx.M For active Emergency Egress handlesets (ENTR) with an oval egress cartridge, 1 2.0 43 41 a Traditional oval thumbpiece, and an Interior Knob5399.xxx.N For active Emergency Egress handlesets (LENT or RENT) with a rectangular egress 1 2.0 43 41 cartridge, a Traditional oval thumbpiece, and an Interior Lever5399.xxx.O For active Tahoe® Emergency Egress handlesets (ENTR or LHRH) with an oval egress 1 2.0 43 41 cartridge, a rectangular thumbpiece and an Interior Knob or Lever

NOTE: All parts must be installed for proper lock function.

5399.xxx.x – convErsion kitsFEATURES: Each conversion kit includes tailpieces (if necessary), thru-bolts, strike plate, and instructions for modifying Images Lock sets for use on doors either 2˝ (51mm) or 2-1/4˝ (57mm) in thickness. (Must specify finish.)WEIGHT: .21 lbs. (.09kg)

ITEM NO. DESCRIPTION DOOR THICKNESS 5399.xxx.A Conversion kit for sectional and 2 ̋(51mm) & 2-1/4 ̋(57mm) escutcheon entrance (ENTR) function lock sets 5399.xxx.B Conversion kit for sectional and 2 ̋(51mm) & 2-1/4 ̋(57mm) escutcheon double cylinder (DBLC) function lock sets 5399.xxx.C Conversion kit for Emergency Egress 2 ̋(51mm) & 2-1/4 ̋(57mm) entrance (ENTR) function lock sets 5399.xxx.D Conversion kit for sectional, escutcheon, 2 ̋(51mm) & 2-1/4 ̋(57mm) and emergency Egress dummy trim sets

219

8201.xxx and 8208.xxx – dEadBolts FEATURES: All Deadbolts are furnished with a 1˝ (25mm) throw. Each contains a saw-proof, hardened steel insert to prevent tampering. Fronts are adjustable for beveled door conditions. All deadbolts have an adjustable backset feature to accommodate 2.375˝ or 2.75˝ backsets.PACKED: Without fasteners. Available in case quantities of twelve (12).WEIGHT: .6 lb. (.27kg)

ADJUSTABLE FRONT FRONT ITEM NO. BACKSET LENGTH WIDTH TYPE OF LOCKSET 8201.xxx.DB 2.375˝ or 2.75˝ 2.25˝ (57mm) 1˝ (25mm) Double Cylinder Lock sets 8208.xxx.DB 2.375˝ or 2.75˝ 2.25˝ (57mm) 1˝ (25mm) Single Cylinder Lock sets

8090.xxx – trim ringsDIMENSIONS: 2.5˝ Dia. (64mm)FEATURES: Trim Rings are designed for use with installation of 8000 Series (1.625˝ {41mm} door prep) Deadbolts in 2.125˝ (54mm) diameter door preparation. One pair of rings is re-quired for use in this application for either Double Cylinder or Cylinder/Turn piece functions. Rings are finished to match Deadbolts.WEIGHT: 2 lb. (.09kg)NOTE: 8090 Trim rings are not required for 8200 series deadbolts.

8097.xxx – cylindEr collar spacEr For 8000 sEriEs dEad-Bolts For 1.375˝˝ (35mm) doorDIMENSIONS: 2˝ Dia. (51mm)FEATURES: For installation on 1.375˝ (35mm) doors. Always used under Cylinder Collar. Two Rings are required for Double Cylinder functions. One Ring is required for Cylinder/Turn piece functions. Finished to match deadbolt cylinder collar. Available at an extra charge. WEIGHT: .2 lb. (.09kg)

8297.xxx – cylindEr collar spacEr For 8200 sEriEs dEadBolts For 1.375˝˝ (35mm) doorDIMENSIONS: 2.5˝ Dia. (64mm)FEATURES: For installation on 1.375˝ (35mm) doors. Always used under Cyl-inder Collar. Two Rings are required for Double Cylinder functions. One Ring is required for Cylinder/Turn piece functions. Finished to match deadbolt cylinder collar. Available at an extra charge. WEIGHT: .3 lb. (.14kg)

8098.xxx – convErsion kits For 2˝ and 2.25˝ doorsPACKED: One per box. ITEM NO. FUNCTION DOOR THICKNESS8098.000.TP03 Cylinder / Turn Piece 2˝ (51mm) & 2.25˝ (57mm)8098.000.DC03 Double Cylinder 2˝ (51mm) & 2.25˝ (57mm)

8098.000.TP03 8098.000.DC03

tuBular – dEadBolt accEssoriEs

219

tuBular – EntrancE sEt & dEadBolt accEssoriEs

050, 102, 112 Other 150, 151, 190 402, 412 FinishesItem # Function U/M. Wt. 003 260, 264 452 055, 056 (As Marked)

k kEyway dEadBolt cylindErs 8022.xxx.KDS Compatable with Kwikset & Ultra-Max – For use on sectional locksets each 0.5 $43 43 N/A N/A 8022.xxx.KDE Compatable with Kwikset & Ultra-Max – For use on emergency Egress locksets each 0.5 43 43 N/A N/A strikEs8000.xxx.RSTR Radius corner deadbolt strike each 0.2 10 10 10 N/A8000.xxx.STR Standard security deadbolt strike each 0.2 10 10 10 N/A8000.1849.STR3 Dust box each 0.1 N/A N/A N/A N/A cylindEr & turnpiEcE componEnts8011.xxx.0020 Inside cylinder each 0.1 11 11 N/A 118011.xxx.0021 Cylinder threaded sleeve for mounting inside of double cylinder deadbolt each 0.2 N/A N/A N/A N/A 039=78011.xxx.0031 Tumbler springs 100/pkg 0.1 N/A N/A N/A N/A 109=198030.xxx.0003 Traditional outside cylinder collar each 2.0 25 23 28 28 060=238030.xxx.0005 Traditional inside cylinder collar each 2.0 28 25 28 28 060=258030.xxx.0510 Traditional turn knob assembly each 0.3 57 53 57 578031.xxx.TP11 Turn piece tail piece, older style handleset each N/A N/A N/A N/A 028=28031.xxx.SH18 Pan head thru-bolt each 0.1 N/A N/A N/A N/A 509=18040.xxx.0004 Contemporary outside cylinder collar each 0.3 28 23 24 24 060=23?8040.xxx.0006 Contemporary inside cylinder collar each 0.2 28 23? 26 26 8040.xxx.0510 Contemporary turn knob assembly each 0.3 57 53 54 57 8237.xxx.0510 Bethpage turn knob each 0.4 64 62 64 648053.xxx.TP115 Cylinder tail piece for double cylinder deadbolt — up to 2 1/4˝ doors each 0.2 N/A N/A N/A N/A 028=28053.xxx.TP425 Cylinder tail piece for single cylinder deadbolt — 1 3/4˝ doors each 0.2 N/A N/A N/A N/A 028=28053.xxx.TP525 Cylinder tail piece for single cylinder deadbolt — > 1 7/8˝ to 2 1/4˝ doors each 0.2 N/A N/A N/A N/A 028=28053.xxx.TP325 Cylinder tail piece for single cylinder deadbolt — 1 3/8˝ doors each 0.2 N/A N/A N/A N/A 028=28053.xxx.TP215 Cylinder tail piece for egress each 0.1 N/A N/A N/A N/A 028=28031.xxx.TP012 Cylinder tail piece for patio deadbolt each 0.1 N/A N/A N/A N/A 028=28031.xxx.KD12 Cylinder and tail piece for non-egress handleset and single cylinder deadbolts each 0.5 36 32 36 N/A8031.xxx.KD22 Cylinder and tail piece for egress handlesets each 0.5 34 32 36 N/A8011.xxx.KD12 Double cylinder for handlesets and deadbolts each 0.8 68 67 68 N/A8052.xxx.00045 Cylinder cap tool each 0.1 N/A N/A N/A N/A 289=5

trim rings & collars 8090.xxx Trim rings for 2 1/8˝ hole pair 0.2 11 11 N/A 118097.xxx Cylinder collar spacer for 1 3/8˝ thick doors for 80xx series deadbolts (1 5/8˝ prep) each 0.2 11 11 N/A 118098.xxx.DC03 Double cylinder conv. kit for 2˝ & 2 1/4˝ thick doors each 0.1 N/A N/A N/A N/A 000=48098.xxx.TP03 Single cylinder conv. kit for 2˝ & 2 1/4˝ thick doors each 0.1 N/A N/A N/A N/A 000=48297.xxx Cylinder collar spacer for 1 3/8˝ thick doors for 82xx series deadbolts (2 1/8˝ prep) each 0.3 17 17 N/A 17

dEadBolts 8201.xxx.DB Adjustable deadbolt for double cylinder & patio each 0.6 30 25 N/A 308208.xxx.DB Adjustable deadbolt for single cylinder each 0.6 30 25 N/A 30

221

installation – dummy

Full dummy w/ rose installation A. Drill a .625˝ (16mm) hole completely through the door.B. Insert spindle through drilled hole with the V grooves down

and toward the bottom hinge.C. Slide 5098.009* Back Plates over spindle. (NOTE: the word

“TOP˝ is marked on the back plate for exact alignment.)D. Install screws into back plate.E. Thread roses onto back plates and install trim.NOTE: The 5090.020.A Dummy Insert is available with 5186.009 Adaptor Set for full dummy applications on pre-drilled doors. Refer to Components in this catalog section.*For exposed screw mounted roses and all escutcheons, 5099.004.N Back Plate is supplied standard.ORDERING INSTRUCTIONS: Indicate “FD˝ (Full Dummy) after the required trim and finish. For further information, refer to Ordering Instructions in this catalog section.

Half dummy w/ rose installationA. Position 5098.004.A* Back Plate with dummy spindle at

desired location and relieve the door surface to allow flush seating of the back plate. (NOTE: the word “TOP˝ is marked on the back plate for exact alignment.)

B. Install screws into back plate.C. Thread rose onto back plate and install trim.NOTE: Nos. 5084/5094 Rigid Mounting Trim is available for thru bolt Dummy Mount applications. *For exposed screw mounted roses and all escutcheons, appropriate half dummy spindle is supplied standard.

Rose

5098.009.N Back Plate*

Rose

5098.004.A Back Plate*/Spindle Assembly

Full dummy pre-drilled door installationA. Install 5090.020 Dummy Insert into tubular latch hole.B. Position 5185.009 Adaptor (with threaded studs attached) on

outside of door and 5185.009 Adaptor on inside face of door.C. Install screws through the inside Adaptor and thread screws into

studs.D. Install 0579.007 Filler Plate on edge of door.E. Thread roses onto 5185.009 Adaptor Set.F. Insert spindle and install trim.

221

installation – passagE

passage pre-drilled door installationA. Install latch and strike per template instructions.B. Position 5185.009 Adaptor (with threaded studs attached) on

outside of door and 5185.009 Adaptor on inside face of door.C. Loosely install screws through the inside plate and thread screws

into studs.D. Insert alignment bushings into Adaptor and then insert spindle

through the alignment bushings and fully tighten screws. Remove alignment bushings and discard.

E. Thread roses onto 5185.009 Adaptor Set.F. Install trim.

passage w/ rose installationUPON INSTALLATION OF LATCH AND BACK PLATES/ADAPTORS:A. Thread supplied roses onto 5097.009 Back Plates.B. Insert 5095.000 Graphite Spacer over spindle and into rose.C. Slide knob or lever trim completely onto the spindle from

both sides of the door. (NOTE: A minimal amount of “play˝ is required between the knob/lever and the rose to prevent the trim from binding.)

D. Secure steel set screws with.25˝ Socket Wrench.IMPORTANT: Set screw is coated with a special epoxy (resin) to prohibit the screw from loosening over time.

223

mortise Bolt installationWhen installing mortise bolts, ALWAYS check width of Emergency Release Trim before drilling face bore. Standard bore is .625˝ (16mm) completely through door. Emergency Release Trim 0406 and 0407 require a .5˝ (13mm) bore on outside face of door; a .625˝ (16mm) bore on inside face of door.IMPORTANT: When Emergency Release Trim is used, the turn piece spindle must be cut to extend no farther than halfway through the bolt.

5528Combination Privacy Strike

NOTE: IN COMBINATIONMOUNTING APPLICATIONS,THE MINIMUM DISTANCEBETWEEN CENTER OFBOLTS IS 2.25˝.

installation – privacy

tubular latch/mortise Bolt installation A. When installing mortise bolts with tubular latches, ALWAYS ensure

that face plates of both mechanisms have a minimum of .5˝ (13mm) clearance between face plates [2.75˝ (70mm) minimum distance between center of bolts] for proper strike installation. If mortise bolt and latch/face plates are installed against each other (as illustrated), use 5528 Strike illustrated above, and on page F/29.

CAUTION: WHEN ROSES OF 2.625˝ DIAMETER ARE USED WITH THIS STRIKE, TURN PIECES NOS. 6728, 6732, 6734, and 6751 CANNOT BE USED DUE TO CLEARANCE RESTRICTIONS.NOTE: 5528 strike is designed with a curved lip. Please specify hand of door when ordering. Hand of strike based on latch bolt being installed below the mortise bolt.Tubular latches and mortise bolts may be used in conjunction with

escutcheons. Use of 5528 Strike is required to replace normally furnished strikes due to clearance restrictions.

privacy pre-drilled door installation A. Install latch and strike per template instructions.B. Position 5185.009 Adaptor (with threaded studs attached) on

outside of door and 5185.009 Adaptor on inside face of door.C. Loosely install screws through the inside plate and thread screws

into studs.D. Insert spindle (raised tab should be facing on the outside of door)

and then insert alignment bushings into Adaptor. Fully tighten screws. Remove alignment bushings and discard.

E. To attach roses to Adaptors, place rose over 5185.009 Adaptor and secure by threading 5197.000 brass Rose Retainer onto the Adaptor. Tighten with 5198.000 steel spanner tool provided.

F. Thread 5510.xxx.0030 or 5513.xxx.0030 Privacy Button into latch. (See page F/19 for further details regarding the privacy button.)

G. Install trim.

223

installation – privacy

2˝ privacy rose installation

After completing the latch and backplate installation, a hole for the privacy button needs to be drilled.

The first step is to remove the alignment bushings and spindle used for the backplate installation process.

privacy Button

5097 Backplate

1.

Attach the roses to the backplates using the rose retainers and tighten with the supplied spanner tool.

Use a pencil to mark the privacy hole location on each side of the door.

ROSE

ROSE RETAINER

SPANNER TOOL

HOLELOCATION

2.

HOLELOCATIONHOLELOCATIONHOLELOCATION

5.4.

To avoid damage, remove both roses and the latch before drilling the privacy holes.

3.

Drill a 1/4” diameter hole through both sides of the door.

Caution: To assure proper hole location drill from each side of the door and not from one side only.

Re-install the latch and re-attach both roses.

On the inside of the room, thread the privacy button into the latch and install the knobs or levers.

1/4” DIAMETER HOLE

PRIVACYBUTTON

PK.5097 (11/06)

MARKED HOLE

LOCATION

225

indEx – numErical

0129.xxx ...............................510175.xxx ...............................510403.xxx ...............................490404.xxx ...............................490405.xxx ...............................490406.xxx ...............................490406.xxx ............................ 2050407.xxx ...............................490413.xxx ...............................460413.xxx.LTP .......................460414.xxx ...............................460415.xxx ...............................490416.xxx ...............................490417.022 ..............................490418.xxx ...............................460418.xxx.LTP .......................460419.xxx ...............................460421.xxx ...............................480421S.xxx ............................490422.xxx ...............................490423.xxx ...............................490423S.xxx ............................490509.004 ..............................450510.004 ..............................450510.004.A...........................450510.004.A...........................450511.004 ..............................450511.004.A...........................450512.004 ..............................450512.004.A...........................450513.004 ..............................450513.004.A...........................450514.004 ..............................450514.004.A...........................450515.004 ..............................450515.004.A...........................450516.004 ..............................450516.004.A...........................450519.004 ..............................450520.004 ..............................450520.004.A...........................450521.004 ..............................450521.004.A...........................450522.004 ..............................450522.004.A...........................450524.004 ..............................450524.004.A...........................450525.004 ..............................450525.004.A...........................450530.004 ..............................450530.004.A...........................450531.004 ..............................450531.004.A...........................450532.004 ..............................450532.004.A...........................450533.004 ..............................450533.004.A...........................450539.004 ..............................451327.009 ..............................515000.xxx.IMR .......................125000.xxx.MR ........................125000.xxx.MRPN ...................125001.xxx.IMR .......................125001.xxx.MR ........................125001.xxx.MRPN ...................125002.xxx ...............................325002.xxx..IDM......................325002.xxx.FD .........................325002.xxx.I .............................325003.xxx ...............................325003.xxx.FD .........................325003.xxx.I .............................325003.xxx.IDM.......................325004.xxx ..............................325004.xxx.FD .........................325004.xxx.I .............................325004.xxx.IDM.......................325005.xxx.IMR .......................125005.xxx.MR ........................125005.xxx.MRPN ...................125006.xxx ..............................335006.xxx.FD .........................335006.xxx.I .............................335006.xxx.IDM.......................33

5007.xxx.IMR .......................125007.xxx.MR ........................125007.xxx.MRPN ...................125008.xxx.IMR .......................125008.xxx.MR ........................125008.xxx.MRPN ...................125009.xxx.IMR .......................135009.xxx.MR ........................135009.xxx.MRPN ...................135010.xxx ...............................335010.xxx.FD .........................335010.xxx.I .............................335010.xxx.IDM.......................335011.xxx.IMR .......................135011.xxx.MR ........................135011.xxx.MRPN ...................135012.xxx.IMR .......................135012.xxx.IMR .......................135012.xxx.MR ........................135012.xxx.MR ........................135012.xxx.MRPN ...................135012.xxx.MRPN ...................135013.xxx.MR ........................135013.xxx.IMR .......................135013.xxx.MRPN ...................135014.xxx ...............................335014.xxx.FD .........................335014.xxx.I .............................335014.xxx.IDM.......................335015.xxx.IMR .......................135015.xxx.MR ........................135015.xxx.MRPN ...................135016.xxx ..............................345016.xxx.FD .........................345016.xxx.I .............................345016.xxx.IDM.......................345017.xxx ...............................325017.xxx.FD .........................325017.xxx.I .............................325017.xxx.IDM.......................325018.xxx ..............................345018.xxx.FD .........................345018.xxx.I .............................345018.xxx.IDM.......................345019.xxx ..............................345019.xxx.FD .........................345019.xxx.I .............................345019.xxx.IDM.......................345020.xxx.IMR .......................145020.xxx.MR ........................145021.xxx ..............................345021.xxx .FD ........................345021.xxx.I .............................345021.xxx.IDM.......................345022.xxx.IMR .......................145022.xxx.MR ........................145022.xxx.MRPN ...................145023.xxx.IMR .......................145023.xxx.MR ........................145023.xxx.MRPN ...................145025.xxx.IMR .......................145025.xxx.MR ........................145025.xxx.MRPN ...................145026.xxx ..............................345026.xxx.FD .........................345026.xxx.I .............................345026.xxx.IDM.......................345027.xxx ..............................355027.xxx.FD .........................355027.xxx.I .............................355027.xxx.IDM.......................355028.xxx ...............................355028.xxx.FD .........................355028.xxx.I .............................355028.xxx.IDM.......................355029.xxx ...............................355029.xxx.FD .........................355029.xxx.I .............................355029.xxx.IDM.......................355030.xxx.IMR .......................145030.xxx.MR ........................145030.xxx.MRPN ...................145031.xxx.IMR .......................155031.xxx.MR ........................15

5031.xxx.MRPN ...................155032.xxx ...............................335032.xxx.FD .........................335032.xxx.I .............................335032.xxx.IDM.......................335032S.xxx ............................415032S.xxx.FD.......................415032S.xxx.I ..........................415032S.xxx.IDM ....................415033S.xxx ...........................415033S.xxx.FD.......................415033S.xxx.I ..........................415033S.xxx.IDM ....................415034S.xxx ...........................415034S.xxx.FD.......................415034S.xxx.I ..........................415034S.xxx.IDM ....................415035.xxx ...............................355035.xxx.FD .........................355035.xxx.I .............................355035.xxx.IDM.......................355036.xxx ...............................365036.xxx.FD .........................365036.xxx.I .............................365036.xxx.IDM.......................365037.xxx ..............................365037.xxx .FD ........................365037.xxx.I .............................365037.xxx.IDM.......................365038.xxx ...............................365038.xxx.FD .........................365038.xxx.I .............................365038.xxx.IDM.......................365039.xxx.IMR .......................155039.xxx.MR ........................155039.xxx.MRPN ...................155040.xxx.IMR .......................155040.xxx.MR ........................155040.xxx.MRPN ...................155041.xxx.IMR .......................155041.xxx.MR ........................155041.xxx.MRPN ...................155042.xxx ..............................365042.xxx.FD .........................365042.xxx.I .............................365042.xxx.IDM.......................365044.xxx ...............................375044.xxx.FD .........................375044.xxx.I .............................375044.xxx.IDM.......................375045.xxx.IMR .......................155045.xxx.MR ........................155045.xxx.MRPN ...................155046.xxx ..............................335046.xxx.FD ........................335046.xxx.I .............................335046.xxx.IDM.......................335047.xxx ..............................375047.xxx.FD .........................375047.xxx.I .............................375047.xxx.IDM.......................375048.xxx ..............................325048.xxx.FD .........................325048.xxx.I .............................325048.xxx.IDM.......................325050.xxx.IMR .......................165050.xxx.MR ........................165050.xxx.MRPN ...................165053.xxx ..............................355053.xxx.FD .........................355053.xxx.I .............................355053.xxx.IDM.......................355055.xxx.IMR .......................165055.xxx.MR ........................165055.xxx.MRPN ...................165055S.xxx.IMR ....................195055S.xxx.MR .....................195055S.xxx.MRPN ................195056.xxx ..............................375056.xxx.FD .........................375056.xxx.I .............................375056.xxx.IDM.......................375056S.xxx ...........................415056S.xxx.FD.......................41

5056S.xxx.I ..........................415056S.xxx.IDM ....................415057.xxx.IMR .......................165057.xxx.MR ........................165057.xxx.MRPN ...................165058.xxx ..............................375058.xxx.FD .........................375058.xxx.I .............................375058.xxx.IDM.......................375059.xxx ..............................375059.xxx.FD .........................375059.xxx.I .............................375059.xxx.IDM.......................375060.xxx.IMR .......................165060.xxx.MR ........................165060.xxx.MRPN ...................165061S.xxx.IMR ....................195061S.xxx.MR .....................195061S.xxx.MRPN ................195062.xxx ..............................345062.xxx.FD .........................345062.xxx.I .............................345062.xxx.IDM.......................345063.xxx.IMR .......................165063.xxx.MR ........................165063.xxx.MRPN ...................165064.xxx.IMR .......................175064.xxx.MR ........................175064.xxx.MRPN ...................175065.xxx.IMR .......................175065.xxx.MR ........................175065.xxx.MRPN ...................175066.xxx.IMR .......................175066.xxx.MR ........................175066.xxx.MRPN ...................175067.xxx.IMR .......................175067.xxx.MR ........................175067.xxx.MRPN ...................175068.xxx.IMR .......................175068.xxx.MR ........................175068.xxx.MRPN ...................175069.xxx.IMR .......................185069.xxx.MR ........................185069.xxx.MRPN ...................185070.xxx ..............................335070.xxx.I .............................335070.xxx.FD .........................335070.xxx.IDM.......................335071.xxx ..............................385071.xxx.FD .........................385071.xxx.I .............................385071.xxx.IDM.......................385072.xxx.IMR .......................185072.xxx.MR ........................185072.xxx.MRPN ...................185073.xxx.IMR .......................185073.xxx.MR ........................185073.xxx.MRPN ...................185074.xxx ..............................385074.xxx.FD .........................385074.xxx.I .............................385074.xxx.IDM.......................385075.xxx ..............................355075.xxx.FD .........................355075.xxx.I .............................355075.xxx.IDM.......................355076..xxx .............................365076.xxx.FD .........................365076.xxx.I .............................365076.xxx.IDM.......................365077.004 ..............................445077.004.A...........................445078..xxx .............................365078.xxx.FD .........................365078.xxx.I .............................365078.xxx.IDM.......................365081.xxx.A ...........................505082.xxx.A ...........................505084.xxx ...............................445084.009.0002 ....................515085.000 ..............................515090.020.A...........................505091.004 ..............................445091.004.A...........................44

5092.004 ..............................445092.004.A...........................445097.009.N ..........................515098.004.A...........................445098.004.N ..........................445098.009.N ..........................445099.004 ..............................445100.xxx.MR ........................205100.xxx.MRPN ...................205100.xxx.RMR (.LMR) .........205101.xxx.MR ........................205101.xxx.MRPN ...................205101.xxx.RMR (.LMR) .........205103.xxx.MR ........................205103.xxx.MRPN ...................205103.xxx.RMR (.LMR) .........205104.xxx.MR ........................205104.xxx.MRPN ...................205104.xxx.RMR (.LMR) .........205105.xxx.MR ........................215105.xxx.MRPN ...................215105.xxx.RMR (.LMR) .........215106.xxx.MR ........................215106.xxx.MRPN ...................215106.xxx.RMR (.LMR) .........215107.xxx.MR ........................215107.xxx.MRPN ...................215107.xxx.RMR (.LMR) .........215108.xxx.MR ........................215108.xxx.MRPN ...................215108.xxx.RMR (.LMR) .........215109.xxx.MR ........................225109.xxx.MRPN ...................225109.xxx.RMR (.LMR) .........225112.xxx.MR ........................225112.xxx.MRPN ...................225112.xxx.RMR (.LMR) .........225113.xxx.MR ........................225113.xxx.MRPN ...................225113.xxx.RMR (.LMR) .........225114.xxx.MR ........................225114.xxx.MRPN ...................225114.xxx.RMR (.LMR) .........225115.xxx.MR ........................235115.xxx.MRPN ...................235115.xxx.RMR (.LMR) .........235116.xxx.MR ........................235116.xxx.MRPN ...................235116.xxx.RMR (.LMR) .........235117.xxx.MR ........................235117.xxx.MRPN ...................235117.xxx.RMR (.LMR) .........235118.xxx.MR ........................235118.xxx.MRPN ...................235118.xxx.RMR (.LMR) .........235119.xxx ...............................345119.xxx.I .............................345121.xxx.MR ........................245121.xxx.MRPN ...................245121.xxx.RMR (.LMR) .........245122.xxx.MR ........................245122.xxx.MRPN ...................245122.xxx.RMR (.LMR) .........245123.xxx ...............................335123.xxx ...............................335125.xxx.MR ........................245125.xxx.MRPN ...................245125.xxx.RMR (.LMR) .........245126.xxx ...............................345126.xxx.I .............................345127.xxx ...............................355127.xxx.I .............................355129.xxx ...............................365129.xxx.I .............................365130.xxx.MR ........................245130.xxx.MRPN ...................245130.xxx.RMR (.LMR) .........245132.xxx.MR ........................245132.xxx.MRPN ...................245132.xxx.RMR (.LMR) .........245133S.xxx ............................415133S.xxx.I ..........................415134.xxx ...............................365134.xxx.I .............................36

5135.xxx.MR ........................255135.xxx.MRPN ...................255135.xxx.RMR (.LMR) .........255136.xxx.MR ........................255136.xxx.MRPN ...................255136.xxx.RMR (.LMR) .........255137.xxx.MR ........................255137.xxx.MRPN ...................255137.xxx.RMR (.LMR) .........255138.xxx.MR ........................255138.xxx.MRPN ...................255138.xxx.RMR (.LMR) .........255139.xxx ...............................335139.xxx.I .............................335139S.xxx ............................415139S.xxx.I ..........................415140.xxx ...............................375140.xxx.I .............................375141.xxx.MR ........................255141.xxx.MRPN ...................255141.xxx.RMR (.LMR) .........255142.xxx ...............................365142.xxx.I .............................365143.xxx ...............................385143.xxx.I .............................385144.xxx ...............................355144.xxx.I .............................355145.xxx ...............................345145.xxx.I .............................345146.xxx ...............................335146.xxx.I .............................335147.xxx ..............................375147.xxx.I .............................375148.xxx ...............................325148.xxx.I .............................325149.xxx ...............................325149.xxx.I .............................325151.xxx ...............................335151.xxxI ..............................335152.xxx.MR ........................265152.xxx.MRPN ...................265152.xxx.RMR (.LMR) .........265153.xxx ...............................355153.xxx.I .............................355155.xxx ...............................355155.xxx.I .............................355156.xxx ...............................355156.xxx.I .............................355157.xxx ...............................365157.xxx.I .............................365158.xxx ...............................375158.xxx.I .............................375159.xxx ...............................375159.xxx.I .............................375160.xxx ...............................375160.xxx.I .............................375160S.xxx ............................415160S.xxx.I ..........................415161.xxx.MR ........................265161.xxx.MRPN ...................265161.xxx.RMR (.LMR) .........265162.xxx.MR ........................265162.xxx.MRPN ...................265162.xxx.RMR (.LMR) .........265164.xxx.MR ........................265164.xxx.MRPN ...................265164.xxx.RMR (.LMR) .........265165.xxx.MR ........................265165.xxx.MRPN ...................265165.xxx.RMR (.LMR) .........265166.xxx.MR ........................275166.xxx.MRPN ...................275166.xxx.RMR (.LMR) .........275168S.xxx.MR .....................295168S.xxx.MR .....................295168S.xxx.RMR (.LMR) .......295170S.xxx.MR .....................295170S.xxx.MR .....................295170S.xxx.RMR (.LMR) .......295171.xxx ...............................385171.xxx.I .............................385172S.xxx.MR .....................295172S.xxx.MR .....................295172S.xxx.RMR (.LMR) .......29

225

indEx – numErical

6556.xxx.DBLC ..................826556.xxx.ENFD ..................826556.xxx.ENTR ....................826556.xxx.FD .......................826557.xxx.DBLC ..................846557.xxx.ENFD ..................846557.xxx.ENTR ....................846557.xxx.FD .......................846560.xxx.DBLC ..................866560.xxx.ENFD ..................866560.xxx.ENTR ....................866560.xxx.FD .......................866562.xxx.DBLC ..................886562.xxx.ENFD ..................88 .xxx.ENTR ..........................886562.xxx.FD .......................886563.xxx.DBLC ..................906563.xxx.ENFD ..................906563.xxx.ENTR ....................906563.xxx.FD .......................906564.xxx.DBLC ..................926564.xxx.ENFD ..................926564.xxx.ENTR ....................926564.xxx.FD .......................926565.xxx.DBLC ..................946565.xxx.ENFD ..................946565.xxx.ENTR ....................946565.xxx.FD .......................946567.xxx.DBLC ..................966567.xxx.ENFD ..................966567.xxx.ENTR ....................966567.xxx.FD .......................966568.xxx.DBLC ..................98 6568.xxx.ENFD ..................986568.xxx.ENTR ....................986568.xxx.FD .......................986570.xxx.DBLC ............... 1006570.xxx.ENFD ............... 1006570.xxx.ENTR ................. 1006570.xxx.FD .................... 1006571.xxx.DBLC ............... 1026571.xxx.ENFD ............... 1026571.xxx.ENTR ................. 1026571.xxx.FD .................... 1026572.xxx.DBLC ............... 1046572.xxx.ENFD ............... 1046572.xxx.ENTR ................. 1046572.xxx.FD .................... 1046573.xxx.DBLC ............... 1066573.xxx.ENFD ............... 1066573.xxx.ENTR ................. 1066573.xxx.FD .................... 1066599.xxx.THKA................ 1446599.xxx.THKB................ 1446599.xxx.THKC ............... 1446599.xxx.THKD ............... 1446599.xxx.THKE ................ 1446599.xxx.THKF ................ 1446599.xxx.THKG ............... 1446599.xxx.THKH ............... 1446599.xxx.THKI ................. 1446599.xxx.THKJ ................ 1446599.xxx.THKK................ 1446599.xxx.THKL ................ 1446601.xxx ...............................826601.xxx.DM ......................826602.xxx ...............................966602.xxx.DM ......................966603.xxx ...............................646603.xxx.DM ......................646604.xxx ............................ 1026604.xxx.DM ................... 1026605.xxx ...............................686605.xxx.BB30 .....................686605.xxx.BB75 .....................686605.xxx.BBFD ....................686605.xxx.DM ......................686606.xxx ...............................846606.xxx.DM ......................846607.063 ..............................746607.063.BB30 ....................746607.063.BB75 ....................746607.063.BBFD ...................746607.063.DM .....................74

5173S.xxx.MR .....................295173S.xxx.MR .....................295173S.xxx.RMR (.LMR) .......295174.022 ..............................495177S.xxx.MR .....................295177S.xxx.MR .....................295177S.xxx.RMR (.LMR) .......295185.009 ..............................505190.xxx.MR ........................275190.xxx.MRPN ...................275190.xxx.RMR (.LMR) .........275197.000 ..............................515198.000 ..............................525199.000 ..............................425300.xxx.EFLS .....................435397.xxx.15A .................. 1455397.xxx.15B .................. 1455397.xxx.15C .................... 1455397.xxx.15D .................... 1455397.xxx.15E .................... 1455397.xxx.15F .................... 1455397.xxx.15G .................... 1455398.xxx.A ........................ 2175398.xxx.B ........................ 2175398.xxx.C ........................ 2175398.xxx.D ........................ 2175398.xxx.G ........................ 2175398.xxx.H ........................ 2175399.xxx.A ........................ 2175399.xxx.B ........................ 2175399.xxx.C ........................ 2175399.xxx.D ........................ 2175399.xxx.G ........................ 2175399.xxx.H ........................ 2175399.xxx.I .......................... 2175399.xxx.J ......................... 2175399.xxx.K ........................ 2175399.xxx.L ......................... 2175399.xxx.M ....................... 2175399.xxx.N ........................ 2175399.xxx.O ........................ 2175510.000 ..............................435510.xxx (.ASA, .FLS) ........425510.xxx.0030 .....................425510.xxx.ASTR ....................435510.xxx.E158 .....................435510.xxx.E178 .....................435510.xxx.E214 .....................435510.xxx.FSTR .....................435510.xxx.P (.ASA, .FLS) .....425510.xxx.TSTR .....................435512.xxx (.ASA) ..................425512.xxx.P (.ASA) ...............425513.xxx (.ASA, .FLS) ........425513.xxx.0030 .....................425513.xxx.P (.ASA, .FLS) .....425515.xxx (.ASA) ..................425515.xxx.P (.ASA) ...............425520.xxx (.ASA, .FLS) ........425520.xxx.P (.ASA, .FLS) .....425522.xxx (.ASA) ..................425522.xxx.P (.ASA) ...............425523.xxx (.ASA, .FLS) ........425523.xxx.P (.ASA, .FLS) .....425525.xxx (.ASA) ..................425525.xxx.P (.ASA) ...............425528.xxx.R (.L) .....................435600.xxx.R (.L, .RR, .LL) .. 2025600.xxx.RFD (.LFD) ...... 2025601.xxx ............................ 2045602.xxx.R (.L, .RR, .LL) .. 2025602.xxx.RFD (.LFD) ...... 2025603.xxx ............................ 2045604.xxx.R (.L, .RR, .LL) .. 2025604.xxx.RFD (.LFD) ...... 2025606.xxx ............................ 2045608.xxx ............................ 2045626.xxx ............................ 2045628.xxx ............................ 2045629.xxx ............................ 2045630.xxx.R (.L, .RR, .LL) .. 2025630.xxx.RFD (.LFD) ...... 2025631.xxx ............................ 2045632.xxx.R (.L, .RR, .LL) .. 202

5633.xxx ............................ 2045634.xxx.R (.L, .RR, .LL) .. 2025634.xxx.RFD (.LFD) ...... 2025636.xxx.R (.L, .RR, .LL) .. 2035636.xxx.RFD (.LFD) ...... 2035639.xxx.R (.L, .RR, .LL) .. 2035639.xxx.RFD (.LFD) ...... 2035641.xxx ............................ 2045642.xxx ............................ 2045643.xxx ............................ 2045644.xxx.R (.L, .RR, .LL) .. 2035644.xxx.RFD (.LFD) ...... 2035671.xxx ............................ 2045672.xxx ............................ 2045673.xxx ............................ 2045674.xxx ............................ 2045701.xxx.R (.L, .RR, .LL) .. 2025701.xxx.RFD (.LFD) ...... 2025702.xxx.R (.L, .RR, .LL) .. 2025702.xxx.RFD (.LFD) ...... 2025704.xxx.R (.L, .RR, .LL) .. 2025704.xxx.RFD (.LFD) ...... 2025720.xxx.R (.L, .RR, .LL) .. 2035720.xxx.RFD (.LFD) ...... 2035722.xxx ............................ 2035723.xxx.R (.L) ................. 2035753.xxx ............................ 2055754.xxx ............................ 2055755.xxx ............................ 2055758.xxx ............................ 2055970.xxx.BPG2 ................. 1725970.xxx.CHG ................... 1735970.xxx.FDG ................... 1725971.xxx.BPG2 ................. 1725971.xxx.FDG ................... 1725975.xxx.BPG2 ................. 1725975.xxx.CHG ................... 1735975.xxx.FDG ................... 1725976.xxx.BPG2 ................. 1735976.xxx.FDG ................... 1735980.xxx.BPG2 ................. 1735980.xxx.CHG ................... 1735980.xxx.FDG ................... 1736001.000 ........................... 1596001.xxx.Suffix ................. 1516010.xxx.0004 .................. 1596010.xxx.Suffix ................. 1556020.xxx.Suffix ................. 1516021.xxx.Suffix ................. 1516025.xxx ............................ 1516030.xxx ............................ 1516037.xxx.xxxx ................. 1596038.xxx.xxxx ................. 1596039.xxx.xxxx ................. 1596040.xxx ............................ 1596040.xxx.R (.L) ................. 1596041.xxx ............................ 1596041.xxx.R (.L) ................. 1596042.xxx ............................ 1596043.xxx ............................ 1596043.xxx.R (.L) ................. 1596051.xxx ............................ 1576053.xxx ............................ 1576055.xxx.Suffix ................. 1556060.xxx.Suffix ................. 1556065.xxx.Suffix ................. 1556066.xxx.Suffix ................. 1516070.xxx.Suffix ................. 1556075.xxx.Suffix ................. 1516077.xxx.Suffix ................. 1516080.xxx.Suffix ................. 1516085.xxx.Suffix ................. 1516091.xxx.Suffix ................. 1516100.xxx.Suffix ................. 1556110.xxx.Suffix ................. 1556130.xxx.Suffix ................. 1556150.xxx ............................ 1566160.xxx ............................ 1566301.xxx.0004 .................. 1596301.xxx.Suffix ................. 1516310.xxx.Suffix ................. 1516315.xxx.Suffix ................. 1556318.xxx.Suffix ................. 1556320.xxx.Suffix ................. 151

6321.xxx.Suffix ................. 1516325.xxx ............................ 1516338.xxx.xxxx ................. 1596339.xxx.xxxx ................. 1596340.xxx ............................ 1596340.xxx.R (.L) ................. 1596341.xxx ............................ 1596341.xxx.R (.L) ................. 1596375.xxx.Suffix ................. 1516401.xxx.ENTR ....................576401.xxx.FD .........................576401.xxx.LENT .....................576401.xxx.LFD .......................576401.xxx.RENT ....................576401.xxx.RFD.......................576415.xxx.ENTR ....................586415.xxx.FD .........................586416.xxx.ENTR ....................586416.xxx.FD .........................586420.xxx.ENTR ....................606420.xxx.FD .........................606426.xxx.LENT .....................626426.xxx.LFD .......................626426.xxx.RENT ....................626426.xxx.RFD.......................626450.xxx.ENTR ....................586450.xxx.FD .........................586501.xxx.15A .................. 1456501.xxx.15B .................. 1456501.xxx.15C .................. 1456501.xxx.15D .................. 1456501.xxx.15E ................... 1456501.xxx.15F ................... 1456501.xxx.15G .................. 1456501.xxx.15H .................. 1456501.xxx.15I .................... 1456501.xxx.15J ................... 1456501.xxx.15L ................... 1456501.xxx.15M ................. 1456501.xxx.15N .................. 1456501.xxx.15O .................. 1456502.xxx.KCOS (KCIS) ..... 1346502.xxx.KEOS (KEIS) ...... 1346502.xxx.KNOS (KNIS) ..... 1346502.xxx.KT ...................... 1346503.xxx.KCOS (KCIS) .......886503.xxx.KCOS (KCIS) .... 1266503.xxx.KEOS (KEIS) ........886503.xxx.KEOS (KEIS) ..... 1266503.xxx.KNOS (KNIS) .......886503.xxx.KNOS (KNIS) .... 1266503.xxx.KTOS (KTIS) ........886503.xxx.KTOS (KTIS) ..... 1266505.xxx.RKC (LKC) ............786505.xxx.RKE (LKE) .............786505.xxx.RKN (LKN) ............786505.xxx.RKT (LKT) .............786506.xxx.KC ...................... 1366506.xxx.KE ...................... 1366506.xxx.KN ...................... 1366506.xxx.KT ...................... 1366511.xxx.KC .........................986511.xxx.KE .........................986511.xxx.KN .........................986511.xxx.KT .........................986513.xxx.KC ...................... 1006513.xxx.KC ...................... 1386513.xxx.KE ...................... 1006513.xxx.KE ...................... 1386513.xxx.KN ...................... 1006513.xxx.KN ...................... 1386513.xxx.KT ...................... 1006514.xxx.KT ...................... 1386515.xxx.DBLC ..................586515.xxx.ENFD ..................586515.xxx.ENTR ....................586515.xxx.FD .......................586515.xxx.KC .........................586515.xxx.KE .........................586515.xxx.KN .........................586515.xxx.KT .........................586516.xxx.DBLC ..................586516.xxx.ENTR ....................586516.xxx.FD .......................58

6520.xxx.DBLC ..................606520.xxx.ENFD ..................606520.xxx.ENTR ....................606520.xxx.FD .......................606520.xxx.KC .........................606520.xxx.KE .........................606520.xxx.KN .........................606520.xxx.KT .........................606525.xxx.KC .........................626525.xxx.KE .........................626525.xxx.KN .........................626525.xxx.KT .........................626526.xxx.ENFD ....................626526.xxx.RDBL (LDBL) ...626526.xxx.RENT (LENT) ........626526.xxx.RFD (LFD) .........626540.xxx.DBLC ..................646540.xxx.ENFD ..................646540.xxx.ENTR ....................646540.xxx.FD .......................646541.xxx.DBLC ..................666541.xxx.ENFD ..................666541.xxx.ENTR ....................666541.xxx.FD .......................666542.xxx.DBLC ..................686542.xxx.ENFD ..................686542.xxx.ENTR ....................686542.xxx.FD .......................686543.xxx.DBLC ..................706543.xxx.ENFD ..................706543.xxx.ENTR ....................706543.xxx.FD .......................706544.xxx.ENFD ..................726544.xxx.RDBL (LDBL) .....726544.xxx.RENT (LENT) ........726544.xxx.RFD (LFD) ...........726545.063.DBLC .................746545.063.ENTR ....................746545.063.FD ......................746545.xxx.ENFD ..................746546.xxx.DBLC ..................866546.xxx.ENFD ..................866546.xxx.ENTR ....................866546.xxx.FD .......................866547.xxx.DBLC ..................766547.xxx.DM ......................766547.xxx.ENFD ..................766547.xxx.ENTR ....................766547.xxx.FD .......................766548.xxx.DBLC ..................886548.xxx.ENFD ..................886548.xxx.ENTR ....................886548.xxx.FD .......................886549.xxx.ENFD ..................786549.xxx.RDBL (LDBL) .....786549.xxx.RENT (LENT) ........786549.xxx.RFD (LFD) ...........786550.xxx.ENFD ..................786550.xxx.RDBL (LDBL) ....786550.xxx.RENT (LENT) ........786550.xxx.RFD (LFD) .........786551.xxx.DBLC ..................966551.xxx.ENFD ..................966551.xxx.ENTR ....................966551.xxx.FD .......................966552.xxx.DBLC ..................806552.xxx.DM ......................806552.xxx.ENFD ..................806552.xxx.ENTR ....................806552.xxx.FD .......................806553.xxx ............................ 1346553.xxx.BB30 .................. 1346553.xxx.BB75 .................. 1346553.xxx.BBFD ................. 1346553.xxx.RDM (LDM) .... 1346554.xxx.DBLC ............... 1326554.xxx.DM ................... 1326554.xxx.ENFD ............... 1326554.xxx.ENTR ................. 1326554.xxx.FD .................... 1326555.xxx.DBLC ..................706555.xxx.ENFD ..................706555.xxx.ENTR ....................706555.xxx.FD .......................70

6608.xxx ...............................886608.xxx.BB30 .....................886608.xxx.BB75 .....................886608.xxx.BBFD ....................886608.xxx.DM ......................886614.xxx ...............................906614.xxx.DM ......................906617.xxx ...............................986617.xxx.DM ......................986619.xxx ............................ 1006619.xxx.BB30 .................. 1006619.xxx.BB75 .................. 1006619.xxx.DM ................... 1006620.xxx ............................ 1386620.xxx.DM ................... 1386621.xxx ...............................866621.xxx.BB30 .....................866621.xxx.BB75 .....................866621.xxx.BBFD ....................866621.xxx.DM ......................866622.xxx ...............................726622.xxx.BB30 .....................726622.xxx.BB75 .....................726622.xxx.BBFD ....................726622.xxx.RDM (LDM) .......726624.xxx ............................ 1286624.xxx.BB30 .................. 1286624.xxx.BB75 .................. 1286624.xxx.BBFD ................. 1286624.xxx.RDM (LDM) .... 1286626.xxx ............................ 1046626.xxx.DM ................... 1046627.xxx ............................ 1326627.xxx.BB30 .................. 1326627.xxx.BB75 .................. 1326627.xxx.BBFD ................. 1326627.xxx.DM ................... 1326628.xxx ...............................786628.xxx ............................ 1066628.xxx.BB30 .....................786628.xxx.BB30 .................. 1066628.xxx.BB75 .....................786628.xxx.BB75 .................. 1066628.xxx.BBFD ....................786628.xxx.BBFD ................. 1066628.xxx.DM ......................786628.xxx.DM ................... 1066631.xxx ...............................926631.xxx.DM ......................926634.xxx ...............................946634.xxx.DM ......................946635.xxx ...............................706635.xxx.BB30 .....................706635.xxx.BB75 .....................706635.xxx.BBFD ....................706635.xxx.DM ......................706638.xxx ...............................586638.xxx.DM ......................586639.xxx ...............................586639.xxx.DM ......................586640.xxx ...............................606640.xxx.DM ......................606641.xxx ............................ 1226641.xxx.BB75 .................. 1226641.xxx.BBFD ................. 1226641.xxx.DM ................... 1226642.xxx.KC .........................946642.xxx.KE .........................946642.xxx.KN .........................946642.xxx.KT .........................946643.xxx ...............................626643.xxx.DM ......................626652.xxx ............................ 1306652.xxx.BB30 .................. 1306652.xxx.BB75 .................. 1306652.xxx.BBFD ................. 1306652.xxx.RDM (LDM) .... 1306690.xxx ............................ 1406690.xxx.BB75 .................. 1406690.xxx.BBFD ................. 1406690.xxx.DM ................... 1406701.xxx ...............................496703.xxx ...............................496707.009 ........................... 174

227

indEx – numErical

6709.xxx.KC ...................... 1406709.xxx.KE ...................... 1406709.xxx.KN ...................... 1406709.xxx.KT ...................... 1406714.xxx.KC ...................... 1226714.xxx.KE ...................... 1226714.xxx.KN ...................... 1226714.xxx.KT ...................... 1226720.xxx ...............................486721.xxx ...............................486722.xxx ...............................486724.xxx ...............................486725.xxx ...............................486727.xxx ...............................486728.xxx ...............................476729.xxx ...............................486732.xxx ...............................476733.xxx ...............................476733S.xxx ............................476734.xxx ...............................476735.xxx ...............................486735S.xxx ............................486737.xxx ............................ 1636738.xxx ............................ 1636738S.xxx ......................... 1636739.xxx ............................ 1636743.xxx ............................ 1636743S.xxx ......................... 1636747.xxx ...............................516748.xxx.A ...........................446749.xxx.A ...........................446750.xxx ...............................476751.xxx ...............................476752.xxx ............................ 1636754.xxx ............................ 1636755.xxx .................... 163, 2056755.xxx.001 ............ 163, 2056755.xxx.002 ............ 163, 2056755.xxx.003 ............ 163, 2056756.xxx ...............................476757.xxx ............................ 1636760.xxx ...............................476760S.xxx ............................476761.xxx ............................ 1636762.xxx ...............................476763.xxx.KC .................. 64, 906763.xxx.KE .................. 64, 906763.xxx.KN .................. 64, 906763.xxx.KT .................. 64, 906764.xxx ...............................476765.xxx.KC .........................966765.xxx.KE .........................966765.xxx.KN .........................966765.xxx.KTOS (KTIS) .........966767.xxx.KC .........................806767.xxx.KE .........................806767.xxx.KN .........................806767.xxx.KP .........................806767.xxx.KT .........................806768.xxx ............................ 1636769.xxx.KC .........................826769.xxx.KE .........................826769.xxx.KN .........................826769.xxx.KT .........................826774.xxx.KC ................ 84, 1046774.xxx.KE ................ 84, 1046774.xxx.KN ................ 84, 1046774.xxx.KT ................ 84, 1046789.xxx.KC ...................... 1306789.xxx.KE ...................... 1306789.xxx.KN ...................... 1306789.xxx.KP ...................... 1306789.xxx.KT ...................... 1306790.xxx.KC ...................... 1286790.xxx.KE ...................... 1286790.xxx.KN ...................... 1286790.xxx.KP ...................... 1286790.xxx.KT ...................... 1286791.xxx.KC .........................726791.xxx.KE .........................726791.xxx.KN .........................726791.xxx.KT .........................726792.063 ..............................746792.063.KC ........................74

6792.063.KE ........................746792.063.KN ........................746792.063.KP ........................746792.063.KT ........................746792.063.RDM (LDM) ........746793.xxx.KC .........................766793.xxx.KE .........................766793.xxx.KN .........................766793.xxx.KP .........................766793.xxx.KT .........................766794.xxx.KC ...................... 1026794.xxx.KE ...................... 1026794.xxx.KN ...................... 1026794.xxx.KT ...................... 1026795.xxx.KC .........................866795.xxx.KE .........................866795.xxx.KN .........................866795.xxx.KT .........................866796.xxx.KC .........................686796.xxx.KE .........................686796.xxx.KN .........................686796.xxx.KP .........................686796.xxx.KT .........................686797.xxx.KC .........................706797.xxx.KE .........................706797.xxx.KN .........................706797.xxx.KP .........................706798.xxx.KC ...................... 1066798.xxx.KE ...................... 1066798.xxx.KN ...................... 1066798.xxx.KP ...................... 1066798.xxx.KT ...................... 1066800.xxx.Suffix ................. 1516802.xxx.Suffix ................. 1516810.xxx.Suffix ................. 1516812.xxx.Suffix ................. 1516830.xxx.Suffix ................. 1516832.xxx.Suffix ................. 1516845.xxx ............................ 1556847.xxx ............................ 1556850.xxx ............................ 1566855.xxx ............................ 1556857.xxx ............................ 1556860.xxx ............................ 1566897.xxx ............................ 1596910.xxx.DBLC ............... 1266910.xxx.ENFD ............... 1266910.xxx.ENTR ................. 1266910.xxx.FD .................... 1266910.xxx.RDM (LDM) ..... 1266922.xxx.DBLC ............... 1086922.xxx.ENFD ............... 1086922.xxx.ENTR ................. 1086922.xxx.FD .................... 1086922.xxx.RDM (LDM) ... 1086924.xxx.DBLC ............... 1106924.xxx.ENFD ............... 1106924.xxx.ENTR ................. 1106924.xxx.FD .................... 1106924.xxx.RDM (LDM) ..... 1106927.xxx.DBLC ............... 1126927.xxx.ENFD ............... 1126927.xxx.ENTR ................. 1126927.xxx.FD .................... 1126927.xxx.RDM (LDM) ... 1126931.xxx.ENFD ............... 1146931.xxx.RDBL (LDBL) . 1146931.xxx.RENT (LENT) ..... 1146931.xxx.RFD (LFD) ...... 1146933.xxx.DBLC ............... 1246933.xxx.ENFD ............... 1246933.xxx.ENTR ................. 1246933.xxx.FD .................... 1246933.xxx.RDM (LDM) .... 1246935.063.DBLC .................746935.063.ENTR ....................746935.063.FD ......................746935.xxx.ENFD ..................746937 .xxx.RENT (LENT) .... 1166937.xxx.ENFD ............... 1166937.xxx.RDBL (LDBL) 1166937.xxx.RFD (LFD) .... 1166938.xxx.DBLC ............... 1186938.xxx.ENFD ............... 118

6938.xxx.ENTR ................. 1186938.xxx.FD .................... 1186938.xxx.RDM (LDM) ... 1186939.xxx.DBLC ............... 1326939.xxx.ENFD ............... 1326939.xxx.ENTR ................. 1326939.xxx.FD .................... 1326939.xxx.RDM (LDM) .... 1326940.xxx.DBLC ............... 1146940.xxx.ENTR ................. 1146940.xxx.FD .................... 1146940.xxx.RDM (LDM) ..... 1146942.xxx.DBLC ............... 1206942.xxx.ENFD ............... 1206942.xxx.ENTR ................. 1206942.xxx.FD .................... 1206942.xxx.RDM (LDM) ..... 1206944.xxx.DBLC ............... 1226944.xxx.ENFD ............... 1226944.xxx.ENTR ................. 1226944.xxx.FD .................... 1226948.xxx.ENFD ............... 1246948.xxx.RDBL (LDBL) .. 1246948.xxx.RENT (LENT) ..... 1246948.xxx.RFD (LFD) ........ 1246949.xxx.ENFD ............... 1266949.xxx.RDBL (LDBL) . 1266949.xxx.RENT (LENT) ..... 1266949.xxx.RFD (LFD) ...... 1266950.xxx.ENFD ............... 1286950.xxx.RDBL (LDBL) .. 1286950.xxx.RENT (LENT) ..... 1286950.xxx.RFD (LFD) ........ 1286951.xxx.DBLC ..................726951.xxx.ENFD ..................726951.xxx.ENTR ....................726951.xxx.FD .......................726952.xxx.ENFD ............... 1306952.xxx.RDBL (LDBL) .. 1306952.xxx.RENT (LENT) ..... 1306952.xxx.RFD (LFD) ........ 1306953.xxx ............................ 1146953.xxx.RDM (LDM) .. 1146955.xxx ............................ 1166955.xxx.RDM (LDM) . 1166956.xxx ............................ 1246956.xxx.RDM (LDM) .... 1246960.xxx ............................ 1266960.xxx.DM .................. 1266961.xxx.DBLC ............... 1286961.xxx.DM ................... 1286961.xxx.ENFD ............... 1286961.xxx.ENTR ................. 1286961.xxx.FD .................... 1286962.xxx.DBLC ............... 1306962.xxx.DM ................... 1306962.xxx.ENFD ............... 1306962.xxx.ENTR ................. 1306962.xxx.FD .................... 1306963.xxx.ENFD ............... 1326963.xxx.RDBL (LDBL) .. 1326963.xxx.RENT (LENT) ..... 1326963.xxx.RFD (LFD) ........ 1326966.xxx.ENFD ............... 1346966.xxx.RDBL (LDBL) .. 1346966.xxx.RENT (LENT) ..... 1346966.xxx.RFD (LFD) ........ 1346973.xxx.DBLC ............... 1366973.xxx.ENFD ............... 1366973.xxx.ENTR ................. 1366973.xxx.FD ..................... 1366973.xxx.RDM (LDM) ... 1366974.xxx.DBLC ............... 1346974.xxx.ENFD ............... 1346974.xxx.ENTR ................. 1346974.xxx.FD .................... 1346974.xxx.RDM (LDM) .... 1346975.xxx ...............................666975.xxx.DM ......................666975.xxx.KC .........................666975.xxx.KE .........................666975.xxx.KN .........................666975.xxx.KP .........................666975.xxx.KT .........................66

6976.xxx.ENFD ............... 1386976.xxx.RDBL (LDBL) .. 1386976.xxx.RENT (LENT) ..... 1386976.xxx.RFD (LFD) ....... 1386979.xxx.KC ...................... 1106979.xxx.KE ...................... 1106979.xxx.KN ...................... 1106979.xxx.KT ...................... 1106980.xxx.KC ...................... 1086980.xxx.KE ...................... 1086980.xxx.KN ...................... 1086980.xxx.KP ...................... 1086980.xxx.KT ...................... 1086983.xxx.KC .........................926983.xxx.KC ...................... 1126983.xxx.KE .........................926983.xxx.KE ...................... 1126983.xxx.KN .........................926983.xxx.KN ...................... 1126983.xxx.KT .........................926983.xxx.KT ...................... 1126986.xxx.KC ...................... 1206986.xxx.KE ...................... 1206986.xxx.KN ...................... 1206986.xxx.KT ...................... 1206988.xxx.KC ...................... 1146988.xxx.KE ...................... 1146988.xxx.KN ...................... 1146988.xxx.KT ...................... 1146990.xxx.KC ...................... 1166990.xxx.KE ...................... 1166990.xxx.KN ...................... 1166990.xxx.KT ...................... 1166991.xxx.KC ...................... 1326991.xxx.KE ...................... 1326991.xxx.KN ...................... 1326991.xxx.KP ...................... 1326991.xxx.KT ...................... 1326993.xxx.KC ...................... 1246993.xxx.KE ...................... 1246993.xxx.KN ...................... 1246993.xxx.KT ...................... 1246996.xxx.KC ...................... 1186996.xxx.KE ...................... 1186996.xxx.KN ...................... 1186996.xxx.KT ...................... 1186999.xxx.ENFD ............... 1406999.xxx.RDBL (LDBL) 1406999.xxx.RENT (LENT) ..... 1406999.xxx.RFD (LFD) ...... 1408000.xxx.RSTR ................. 2198000.xxx.STR .................... 2198000.1849.STR3 ............... 2198011.028.0025 ................. 1748011.039.0023 ................. 1748011.039.0027 ................. 1748011.109.0022 ................. 1748011.xxx ............................ 2138011.xxx.0020 .................. 2198011.xxx.0021 .................. 2198011.xxx.0031 .................. 2198011.xxx.KAS4 ................. 2138011.xxx.KD12 ................. 2198021.xxx ............................ 2138021.xxx.KAS4 ................. 2138022.xxx.KDE.................... 2198022.xxx.KDS ................... 2198030.xxx.0003 .................. 2198030.xxx.0005 .................. 2198030.xxx.0510 .................. 2198031.xxx ............................ 2138031.xxx.KAS4 ................. 2138031.xxx.KD12 ................. 2198031.xxx.KD22 ................. 2198031.xxx.SH18 ................. 2198031.xxx.TP012 ................ 2198031.xxx.TP11 .................. 2198040.xxx.0004 .................. 2198040.xxx.0006 .................. 2198040.xxx.0510 .................. 2198041.xxx ............................ 2138041.xxx.KAS4 ................. 2138052.xxx.00045 ................ 2198053.028.TP1 ................... 174

8053.028.TP2 ................... 1748053.028.TP3 ................... 1748053.028.TP4 ................... 1748053.xxx.TP115 ................ 2198053.xxx.TP215 ................ 2198053.xxx.TP325 ................ 2198053.xxx.TP425 ................ 2198053.xxx.TP525 ................ 2198090.xxx ............................ 2198097.xxx ............................ 2198098.xxx.DC03 ................. 2198098.xxx.TP03 .................. 2198105.xxx ............................ 1698105.xxx ........................... 1698105.xxx.7TOP ................. 1698105.xxx.8TOP ................. 1698105.xxx.GD ..................... 1698105.xxx.R510/L510 ........ 1698105.xxx.REPL .................. 1698106, 8107.xxx ................. 1698106, 8107.xxx ................ 1698106.xxx.CVR ................... 1698106.xxx.E24 .................... 1698106.xxx.E48 .................... 1698107.xxx.CVR ................... 1698107.xxx.E24 .................... 1698107.xxx.E48 .................... 1698201.xxx.DB ...................... 2198208.xxx.DB ...................... 2198212.xxx ............................ 2148212.xxx.KAS4 ................. 2148213.xxx ............................ 2148213.xxx.KAS4 ................. 2148231.xxx ............................ 2148231.xxx.KAS4 ................. 2148231.xxx.PAT .................... 2148232.xxx ............................ 2148232.xxx.KAS4 ................. 2148237.xxx ............................ 2148237.xxx.0510 .................. 2198237.xxx.KAS4 ................. 2148238.xxx ............................ 2148238.xxx.KAS4 ................. 2148241.xxx ............................ 2138241.xxx.KAS4 ................. 2138241.xxx.PAT .................... 2138242.xxx ............................ 2138242.xxx.KAS4 ................. 2138244.xxx ............................ 2128244.xxx.KAS4 ................. 2128244.xxx.PAT .................... 2128244S.xxx ......................... 2128244S.xxx.KAS4 ............... 2128244S.xxx.PAT .................. 2128252.xxx ............................ 2158252.xxx.KAS4 ................. 2158253.xxx ............................ 2158253.xxx.KAS4 ................. 2158254.xxx ............................ 2158254.xxx.KAS4 ................. 2158255.xxx ............................ 2158255.xxx.KAS4 ................. 2158285.xxx ............................ 2158285.xxx.KAS4 ................. 2158286.xxx ............................ 2158286.xxx.KAS4 ................. 2158297.xxx ............................ 2198300.009.0065 ................. 1628300.009.0065 ................. 1748300.009.0066 ................. 1628300.009.0066 ................. 1748300.109.005 .................... 1628300.109.005 .................... 1748300.509.004 .................... 1748300.509.AR ..................... 1628300.509.AR ..................... 1748300.509.EMHT................ 1628300.509.STD ................... 1628300.509.STD ................... 1748300.xxx ............................ 1638313.329.TPH1 ................. 1628313.329.TPH1 ................. 1658313.329.TPH1 ................. 1748313.329.TPH2 ................. 162

8313.329.TPH2 ................. 1658313.329.TPH2 ................. 1748313.509.008 .................... 1748313.509.009 .................... 1748314.xxx ............................ 1638314.xxx ............................ 2058320.009.101 .................... 1748320.009.102 .................... 1748320.009.103 .................... 1748320.009.202 .................... 1748320.009.203 .................... 1748320.009.204 .................... 1748320.009.205 .................... 1748320.009.206 .................... 1748320.009.207 .................... 1748320.009.208 .................... 1748320.009.209 .................... 1748320.152.300 .................... 1748320.152.301 .................... 1748320.152.302 .................... 1748320.152.303 .................... 1748320.152.304 .................... 1748320.152.305 .................... 1748320.152.306 .................... 1748320.152.307 .................... 1748320.152.308 .................... 1748320.152.309 .................... 1748320.152.401 .................... 1748321.xxx.DBL.................... 1618321.xxx.DBL.................... 1618322.xxx.DBL.................... 1618322.xxx.DBL.................... 1618323.xxx.DBL.................... 1618323.xxx.DBL.................... 1618324.xxx.DBL.................... 1618324.xxx.DBL.................... 1618325.xxx.DBL.................... 1618325.xxx.DBL.................... 1618326.xxx.DBL.................... 1618326.xxx.DBL.................... 1618327.xxx.DBL.................... 1618327.xxx.DBL.................... 1618328.xxx.DBL.................... 1618328.xxx.DBL.................... 1618329.xxx.DBL.................... 1618329.xxx.DBL.................... 1618330.xxx.DBL.................... 1618330.xxx.DBL.................... 1618333.009.007 .................... 1748333.009.010 .................... 1748333.xxx ............................ 1658333.xxx.H ........................ 1658440.xxx.001 .................... 1618440.xxx.002 .................... 1618440.xxx.003 .................... 1618440.xxx.004 .................... 1618440.xxx.005 .................... 1618440.xxx.006 .................... 1618441.xxx ............................ 1628442.xxx ............................ 1628443.xxx ............................ 1628444.xxx ............................ 1628471.000 ........................... 1748472.000 ........................... 1748472.000.001 .................... 1748472.000.002 .................... 1748472.000.004 .................... 1748472.000.005 .................... 1748474.000 ..............................528480.000 ..............................528481.000.001 .......................528498.000 ........................... 1628530.xxx ............................ 1548530.xxx.FSTR .................. 1548535.xxx ............................ 1548540.xxx ............................ 1548545.xxx ............................ 1548550.xxx ............................ 1568555.xxx ............................ 1568560.xxx ............................ 1568570.xxx ............................ 1718570.xxx.ADAP ................. 1718571.xxx ............................ 1718575.xxx ............................ 171

227

indEx – numErical

R003.xxx.IPS ........................38R003.xxx.IDM ......................38R003.xxx.IPV ........................38R004.xxx.PS .........................38R004.xxx.FD .........................38R004.xxx.PV .........................38R004.xxx.IPS ........................38R004.xxx.IDM ......................38R004.xxx.IPV ........................38R005.xxx.PS .........................39R005.xxx.FD .........................39R005.xxx.PV .........................39R005.xxx.IPS ........................39R005.xxx.IDM ......................39R005.xxx.IPV ........................39R006.xxx.PS .........................39R006.xxx.FD .........................39R006.xxx.PV .........................39R006.xxx.IPS ........................39R006.xxx.IDM ......................39R006.xxx.IPV ........................39R007.xxx.PS .........................39R007.xxx.FD .........................39R007.xxx.PV .........................39R007.xxx.IPS ........................39R007.xxx.IDM ......................39R007.xxx.IPV ........................39R008.xxx.PS .........................39R008.xxx.FD .........................39R008.xxx.PV .........................39R008.xxx.IPS ........................39R008.xxx.IDM ......................39R008.xxx.IPV ........................39R009.xxx.PS .........................39R009.xxx.FD .........................39R009.xxx.PV .........................39R009.xxx.IPS ........................39R009.xxx.IDM ......................39R009.xxx.IPV ........................39R010.xxx.PS .........................39R010.xxx.FD .........................39R010.xxx.PV .........................39R010.xxx.IPS ........................39R010.xxx.IDM ......................39R010.xxx.IPV ........................39R011.xxx.PS .........................40R011.xxx.FD .........................40R011.xxx.PV .........................40R011.xxx.IPS ........................40R011.xxx.IDM ......................40R011.xxx.IPV ........................40R012.xxx.PS .........................40R012.xxx.FD .........................40R012.xxx.PV .........................40R012.xxx.IPS ........................40R012.xxx.IDM ......................40R012.xxx.IPV ........................40R016.xxx.PS .........................40R016.xxx.FD .........................40R016.xxx.PV .........................40R016.xxx.IPS ........................40R016.xxx.IDM ......................40R016.xxx.IPV ........................40R017.xxx.PS .........................40R017.xxx.FD .........................40R017.xxx.PV .........................40R017.xxx.IPS ........................40R017.xxx.IDM ......................40R017.xxx.IPV ........................40R018.xxx.PS .........................40R018.xxx.FD .........................40R018.xxx.PV .........................40R018.xxx.IPS ........................40T501.xxx. ........................... 209T503.xxx. ........................... 209T521.xxx. ........................... 209 T523.xxx. ........................... 209T541.xxx. ........................... 210T543.xxx. ........................... 210T545.xxx. ........................... 210T561.xxx. ........................... 210T563.xxx. ........................... 210T565.xxx. ........................... 210TK001.xxx ............................48

8580.xxx ............................ 1718581.xxx ............................ 1718585.xxx ............................ 1718586.xxx ............................ 1718590.xxx ............................ 1718591.xxx ............................ 1718595.xxx ............................ 1718596.xxx ............................ 1719935.999 ........................... 1749940.000.A........................ 17485624.000.35BIT .............. 211ACT1 ................................. 180ACT2 ................................. 182ACT3 ................................. 184ACT4 ................................. 186ACT5 ................................. 188ACT6 ................................. 191ACT7 ................................. 196AIN1 .................................. 180AIN2 .................................. 182AIN3 .................................. 184AIN4 .................................. 186AIN5 .................................. 188AIN6 .................................. 191D501.xxx.1 ........................ 211D501.xxx.2 ........................ 211D511.xxx.1 ........................ 211D511.xxx.2 ........................ 211D521.xxx.1 ........................ 211D521.xxx.2 ........................ 211FD1 .................................... 180FD2 .................................... 182FD3 .................................... 184FD4 .................................... 186FD5 .................................... 188FD6 .................................... 190FD7 .................................... 196FDP1 ................................. 180FDP2 ................................. 182FDP3 ................................. 184FDP4 ................................. 186FDP5 ................................. 188FDP6 ................................. 190FDP6 ................................. 196FWHAP .............................. 183FWHAx .............................. 183G6010.xxx.Suffix ............... 153G6055.xxx.Suffix ............... 153G6060.xxx.Suffix ............... 153G6065.xxx.Suffix ............... 153G6075.xxx.Suffix ............... 153G6077.xxx.Suffix ............... 153G6085.xxx.Suffix ............... 153G6090.xxx.Suffix ............... 153G6091.xxx.Suffix ............... 153G6110.xxx.Suffix ............... 153G6130.xxx.Suffix ............... 153G6140.xxx.Suffix ............... 153G6150.xxx.Suffix ............... 153G6160.xxx.Suffix ............... 153G6310.xxx.Suffix ............... 153G6318.xxx.Suffix ............... 153G6330.xxx.Suffix ............... 153G6340.xxx.Suffix ............... 153G6350.xxx.Suffix ............... 153G6355.xxx.Suffix ............... 153G6360.xxx.Suffix ............... 153G6361.xxx.Suffix ............... 153G6365.xxx.Suffix ............... 153G6375.xxx.Suffix ............... 153G6377.xxx.Suffix ............... 153G6385.xxx.Suffix ............... 153G6390.xxx.Suffix ............... 153G6391.xxx.Suffix ............... 153K001.xxx.IMR.......................18K001.xxx.MR........................18K002.xxx.IMR.......................18K002.xxx.MR........................18K003.xxx.IMR.......................19K003.xxx.MR........................19K004.xxx.IMR.......................19K004.xxx.MR........................19K005.xxx.IMR.......................19K005.xxx.MR........................19

K006.xxx.IMR.......................19K006.xxx.MR........................19K501.xxx.IDCBO ............... 207K501.xxx.FDCBO .............. 207K501.xxx.PSCBO .............. 207K501.xxx.PVCBO .............. 207K511.xxx.IDCBO ............... 207K511.xxx.FDCBO .............. 207K511.xxx.PSCBO .............. 207K511.xxx.PVCBO .............. 207K511.xxx.FD ...................... 207K511.xxx.ENTR ................. 207K511.xxx.IDCBN ............... 207K511.xxx.FDCBN .............. 207K511.xxx.PSCBN .............. 207K511.xxx.PVCBN .............. 207K521.xxx.IDCBA ............... 207K521.xxx.FDCBA .............. 207K521.xxx.PSCBA .............. 207K521.xxx.PVCBA .............. 207K531.xxx.IDCBO ............... 207K531.xxx.FDCBO .............. 207K531.xxx.PSCBO .............. 207K531.xxx.PVCBO .............. 207K531.xxx.FD ...................... 207K531.xxx.ENTR ................. 207K531.xxx.IDCBN ............... 207K531.xxx.FDCBN .............. 207K531.xxx.PSCBN .............. 207K531.xxx.PVCBN .............. 207KC3 ................................... 184KC5 ................................... 188KC6 ................................... 190KC7 ................................... 196KCT7 ................................. 196KCA2 ................................. 182KNI2 .................................. 182KNI3 .................................. 184KNI5 .................................. 188KNI6 .................................. 190KNI7 .................................. 196KNIR2 ................................ 182KNIR3 ................................ 184KNIR5 ................................ 188KNIR6 ................................ 190KNIR7 ................................ 196KNO2 ................................. 182KNO3 ................................. 184KNO5 ................................. 188KNO6 ................................. 190KNOR2 .............................. 182KNOR3 .............................. 184KNOR5 .............................. 188KNOR6 .............................. 190KNOR7 .............................. 196KT3 .................................... 184KT3 .................................... 186KT5 .................................... 188KT6 .................................... 190KTA2 .................................. 182L001.xxx.MR ........................27L001.xxx.MRPN ...................27L001.xxx.RMR (.LMR) .........27L002.xxx.MR ........................27L002.xxx.MRPN ...................27L002.xxx.RMR (.LMR) .........27L003.xxx.MR ........................28L003.xxx.MRPN ...................28L003.xxx.RMR (.LMR) .........28L004.xxx.MR ........................28L004.xxx.MRPN ...................28L004.xxx.RMR (.LMR) .........28L005.xxx.MR ........................28L005.xxx.MRPN ...................28L005.xxx.RMR (.LMR) .........28L006.xxx.MR ........................28L006.xxx.MRPN ...................28L006.xxx.RMR (.LMR) .........28L007.xxx.MR ........................30L007.xxx.MRPN ...................30L007.xxx.RMR (.LMR) .........30L008.xxx.MR ........................30L008.xxx.MRPN ...................30L008.xxx.RMR (.LMR) .........30

L009.xxx.MR ........................30L009.xxx.MRPN ...................30L009.xxx.RMR (.LMR) .........30L010.xxx.MR ........................30L010.xxx.MRPN ...................30L010.xxx.RMR (.LMR) .........30L011.xxx.MR ........................30L011.xxx.MRPN ...................30L011.xxx.RMR (.LMR) .........30L012.xxx.MR ........................31L012.xxx.MRPN ...................32L012.xxx.RMR (.LMR) .........32L012.xxx.MR ........................31L012.xxx.MRPN ...................32L012.xxx.RMR (.LMR) .........32L013.xxx.MR ........................31L013.xxx.MRPN ...................31L013.xxx.RMR (.LMR) .........31L014.xxx.MR ........................31L014.xxx.MRPN ...................31L014.xxx.RMR (.LMR) .........31L015.xxx.MR ........................31L015.xxx.MRPN ...................31L015.xxx.RMR (.LMR) .........31L016.xxx.MR ........................31L016.xxx.MRPN ...................31L016.xxx.RMR (.LMR) .........31L017.xxx.MR ........................31L017.xxx.MRPN ...................31L017.xxx.RMR (.LMR) .........31L018.xxx.MR ........................32L018.xxx.MRPN ...................32L018.xxx.RMR (.LMR) .........32L501.xxx.RDCBO .............. 208L501.xxx.LDCBO .............. 208L501.xxx.RFDCBO ............ 208L501.xxx.LFDCBO ............ 208L501.xxx.RPSCBO ............ 208L501.xxx.LPSCBO ............ 208L501.xxx.RPVCBO ............ 208L501.xxx.LPVCBO ............ 208L511.xxx.RDCBO .............. 208L511.xxx.LDCBO .............. 208L511.xxx.RFDCBO ............ 208L511.xxx.LFDCBO ............ 208L511.xxx.RPSCBO ............ 208L511.xxx.LPSCBO ............ 208L511.xxx.RPVCBO ............ 208L511.xxx.LPVCBO ............ 208L511.xxx.RDCBN .............. 208L511.xxx.LDCBN .............. 208L511.xxx.RFDCBN ............ 208L511.xxx.LFDCBN ............ 208L511.xxx.RPSCBN ............ 208L511.xxx.LPSCBN ............ 208L511.xxx.RPVCBN ............ 208L511.xxx.LPVCBN ............ 208L511.xxx.RFD.................... 208L511.xxx.LFD .................... 208L511.xxx.RENT ................. 208L511.xxx.LENT .................. 208L521.xxx.RDCBA .............. 208L521.xxx.LDCBA............... 208L521.xxx.RFDCBA ............ 208L521.xxx.LFDCBA ............ 208L521.xxx.RPSCBA ............ 208L521.xxx.LPSCBA ............ 208L521.xxx.RPVSCBA .......... 208L521.xxx.RPVSBA ............ 208L521.xxx.LPVCBA ............ 208L531.xxx.RDCBA .............. 208L531.xxx.LDCBA............... 208L531.xxx.RFDCBA ............ 208L531.xxx.LFDCBA ............ 208L531.xxx.RPSCBA ............ 208L531.xxx.LPSCBA ............ 208L531.xxx.RPVSCBA .......... 208L531.xxx.RPVSBA ............ 208L531.xxx.LPVCBA ............ 208L531.xxx.RFD.................... 208L531.xxx.LFD .................... 208L531.xxx.RENT ................. 208L531.xxx.LENT .................. 208M502.xxx.ENTR ................ 142

M502.xxx.FD..................... 142M502.xxx.LENT ................ 142M502.xxx.LFD .................. 142M502.xxx.RENT ................ 142M502.xxx.RFD .................. 142M504.xxx.ENTR ................ 142M504.xxx.FD..................... 142M504.xxx.LENT ................ 142M504.xxx.LFD .................. 142M504.xxx.RENT ................ 142M504.xxx.RFD .................. 142M512.xxx.ENTR ................ 142M512.xxx.FD..................... 142M512.xxx.LENT ................ 142M512.xxx.LFD .................. 142M512.xxx.RENT ................ 142M512.xxx.RFD .................. 142M514.xxx.ENTR ................ 142M514.xxx.FD..................... 142M514.xxx.LENT ................ 142M514.xxx.LFD .................. 142M514.xxx.RENT ................ 142M514.xxx.RFD .................. 142M516.xxx.BB30 ................ 143M516.xxx.BB75 ................ 143M516.xxx.BBFD ................ 143M516.xxx.LENT ................ 143M516.xxx.LFD .................. 143M516.xxx.RENT ................ 143M516.xxx.RFD .................. 143M522.xxx.BB30 ................ 143M522.xxx.BB75 ................ 143M522.xxx.BBFD ................ 143M522.xxx.ENTR ................ 143M522.xxx.FD..................... 143M522.xxx.LENT ................ 143M522.xxx.LFD .................. 143M522.xxx.RENT ................ 143M522.xxx.RFD .................. 143MP000.000.AINS .............. 191MP000.000.AINT .............. 191MP000.000.FDPTP........... 191MP000.000.FDPTQ .......... 191MP000.xxx.ACTA .............. 191MP000.xxx.ACTB ............. 191MP000.xxx.ACTC ............. 191MP000.xxx.ACTD ............. 197MP000.xxx.ACTE .............. 197MP000.xxx.ACTF .............. 197MP000.xxx.ACTG ............. 197MP000.xxx.ACTI ............... 197MP000.xxx.FDPTP ........... 191MP000.xxx.FDPTQ ........... 191MP000.xxx.PATJ ............... 197MP000.xxx.PATK .............. 197MP000.xxx.PATL .............. 197MP000.xxx.PATM ............. 197MP000.xxx.PATO .............. 197PAT1 .................................. 180PAT2 .................................. 182PAT3 .................................. 184PAT4 .................................. 186PAT5 .................................. 188PAT6 .................................. 190PAT6 .................................. 196PKT3 .................................. 184PKT4 .................................. 188PKT5 .................................. 188PKT6 .................................. 190U5510.xxx ............................42R001.xxx.FD .........................38R001.xxx.PV .........................38R001.xxx.IPS ........................38R001.xxx.IDM ......................38R001.xxx.IPV ........................38R002.xxx.PS .........................38R002.xxx.FD .........................38R002.xxx.PV .........................38R002.xxx.IPS ........................38R002.xxx.IDM ......................38R002.xxx.IPV ........................38R003.xxx.PS .........................38R003.xxx.FD .........................38R003.xxx.PV .........................38

TK002.xxx ............................48TK003.xxx ............................48TK004.xxx ............................48TK005.xxx ............................48

229

indEx – alpHaBEtical

Empire ..........................................................................................74Fenwick ........................................................................................130Georgetown ......................................................................................78Hamilton ..........................................................................................72Houston ........................................................................................136Kensington ......................................................................................128Kensington 3/4 Escutcheon .............................................................62Kensington® Tubular .......................................................................62Lakeshore ........................................................................................134Lakeshore Lever Set ........................................................................134Lakewood ........................................................................................108Lancaster ..........................................................................................70Lexington ..........................................................................................86Metropolitan ....................................................................................126MIdtown ........................................................................................126Minneapolis ....................................................................................138Mobile ........................................................................................118Monterey ..........................................................................................94Montpelier .......................................................................................112Nashville ..........................................................................................76New York ..........................................................................................88Oval Edinburgh .................................................................................58Pasadena ........................................................................................122Plymouth ........................................................................................104Princeton ..........................................................................................92Reading ..........................................................................................96Renssalear .........................................................................................98Republic ..........................................................................................74Richland ........................................................................................140Richmond ..........................................................................................84San Diego ..........................................................................................64San Francisco ...................................................................................66Springfield .......................................................................................106Stanford ..........................................................................................72Symbology ........................................................................................54Terminology ......................................................................................55Tremont ..........................................................................................68Trenton ..........................................................................................96Vancouver .......................................................................................110Versailles ........................................................................................124Victoria ........................................................................................124Westminster ....................................................................................128Williamsburg .....................................................................................78Willmington ......................................................................................86EscutcHEon platE conFigurations .............................54gardEn door trimBoulder Active Gliding Door Trim ..................................................172Boulder Dummy Gliding Door Trim...............................................172Cody Active Gliding Door Trim ......................................................173Cody Dummy Gliding Door Trim ...................................................173Concord Active Gliding Door Trim ................................................172Concord Dummy Gliding Door Trim .............................................172Concord/Cody Exterior Cylinder Housing ....................................173Hamilton Active Gliding Door Trim................................................172Hamilton Dummy Gliding Door Trim ............................................172Hamilton/Boulder Exterior Cylinder Housing................................173Springfield Active Gliding Door Trim ............................................173Springfield Dummy Gliding Door Trim .........................................173Springfield Exterior Cylinder Housing...........................................173HandlEsEts, BronzEStonebridge Sectional ....................................................................210Stonebridge 3/4 Escutcheon .........................................................210Stonebridge Full Escutcheon .........................................................210Toscana Sectional ..........................................................................209Toscana 3/4 Escutcheon ................................................................209Toscana Full Escutcheon ...............................................................209HandlEsEts, mortisEBethpage 3/4 Escutcheon .............................................................143Boulder 3/4 Escutcheon ...............................................................142Boulder Full Escutcheon ...............................................................142Cody 3/4 Escutcheon .....................................................................142Cody Full Escutcheon ...................................................................142Soho Single Point Escutcheon ......................................................143How to ordEr – dummy .......................................................6How to ordEr – EssEntials ...............................................4How to ordEr – part #’s & procEss .................................5How to ordEr – passagE .....................................................7How to ordEr – privacy ......................................................8

Cylinder Tail Piece For Egress .....................................................219Cylinder Tail Piece For Patio Deadbolt ........................................219Cylinder Tail Pieces For Single Cylinder Deadbolt ...................219Cyl. Threaded Sleeve–Mounting Dbl Cyl. Deadbolt .................219Double Cylinder For Handlesets And Deadbolts .......................219Inside Cylinder ...............................................................................219Pan Head Thru–Bolt .....................................................................219Traditional Inside Cylinder Collar ................................................219Traditional Outside Cylinder Collar .............................................219Traditional Turn Knob Assembly ..................................................219Tumbler Springs ..........................................................................219Turn Piece Tail Piece, Older Style Handleset ..............................219dEadBolts, cylindErsKwikset & Ultra–Max – Emergency Egress Lockset .................219Kwikset & Ultra–Max –Sectional Locksets ................................219dEadBolts, soHotm

Double Cyl. Deadbolt ...................................................................215Double Cyl. Deadbolt – Keyed Alike Set Of 4 ............................215Single Cylinder Deadbolt ..............................................................215SiNgle Cyl. Deadbolt – Keyed Alike Set Of 4 ............................215dEadBolts, squarEdDouble Cylinder Deadbolt ............................................................215Double Cyl. Deadbolt – Keyed Alike Set Of 4 .............................215Single Cylinder Deadbolt ..............................................................215Single Cyl. Deadbolt – Keyed Alike Set Of 4 .............................215dEadBolts, strikEsDust Box ........................................................................................219Radius Corner Deadbolt Strike .....................................................219Standard Security Deadbolt Strike ..............................................219dEadBolts, taHoEDouble Cylinder Deadbolt ............................................................214Double Cyl. Dblt – Keyed Alike Set Of 4 ......................................214Single Cylinder Deadbolt ..............................................................214Single Cyl. Deadbolt – Keyed Alike Set Of 4 .............................214dEadBolts, tHick door kitsFor New Mechanics .......................................................................217For Original Mechanics ................................................................217dEadBolts, traditional Double Cyl. Deadbolt ........................................................... 213, 214Double Cyl. Dblt – Keyed Alike Set Of 4 ............................ 213, 214Patio Deadbolt ...............................................................................214Single Cylinder Deadbolt ..................................................... 213, 214Single Cyl.Deadbolt – Keyed Alike Set Of 4 .........................213, 214dEadBolts, trim rings & collarsCylinder Collar Spacers ................................................................219Double Cylinder Conv. Kit ............................................................219Single Cylinder Conv. Kit ..............................................................219Trim Rings For 2 1/8˝ Hole ...........................................................219dEadBolts, tuBular – Expl. viEws .........................................217douBlE cylindEr 1˝ – 1.5” Double Cylinder ............................................................1611.625˝–2.5” Mortise Cylinder ......................................................161dust BoxEsDust Box (Included With All Mortise Locks) ..............................159Dust Box For Use With 5510.xxx.Tstr Strike ....................................43EmEr. rElEasE trim/BackplatE ..........................................49EntrancE trimAtlanta ........................................................................................100Baltimore ..........................................................................................80Barclay (Knob) Set ..........................................................................132Bismark ........................................................................................120Boston ..........................................................................................70Bristol ........................................................................................132Bristol Lever Set ..............................................................................132Bristol Sectional ................................................................................60Bristol Tubular ...................................................................................60Charleston .........................................................................................82EntrancE trimCharlotte ........................................................................................116Chicago ..........................................................................................90Concord ........................................................................................102Dallas ........................................................................................114Denver ........................................................................................114Detroit ..........................................................................................88Devonshire™ ....................................................................................57Edinburgh ........................................................................................130Edinburgh Sectional..........................................................................58Edinburgh Tubular ............................................................................58

amErican cylindEr – See Multi–PointarmorEd Fronts 1 ˝ & 1.25” Armored Fronts ..........................................................159Blocking rings .....................................................................205crEmonE Bolts .....................................................................169cylindErs – accEssoriEs 5–pin Cylinder Spring Covers .....................................................1626–pin Cylinder Spring Covers .....................................................162Adams Rite Cam ............................................................................162Cylinder Springs ............................................................................162Emhart Cam ...................................................................................162Residential Trim Marking Template Doors ..................................162Rim Cylinder Tailpieces ................................................................162Standard Cam ................................................................................162Turn Knob Cylinders .....................................................................162cylindErs – c kEyway taBlE ........................................161cylindErs – cylindEr trimBeaded Cylindar Collar .................................................................163Blocking Rings ...............................................................................163Colonial Cylindar Collar ...............................................................163Compression Cylinder Collar .......................................................163Contemporary Round Collar ........................................................163Contemporary Round Stainless ...................................................163Contemporary Square Collar .......................................................163Contemporary Square Stainless ..................................................163Cylindar Collar ...............................................................................163Cylindar Lock Cover Plate ............................................................163Dummy Cylindar ...........................................................................163Lakeshore Cylindar Collar ............................................................163Oval Cylindar Collar ......................................................................163Square Cylinder Collar .................................................................163Wrought Cylinder Collar ...............................................................163cylindErs Key Blanks ......................................................................................166Lock Trim Thickness Index ...........................................................160Single Cylinder1” – 2.5” Mortise Cylinders ..................................161rim cylindErsRim Cylinder ..................................................................................165Rim Cylinder Tailpieces ................................................................165dEadBolts, accEssoriEs ...............................................217dEadBolts, adJustaBlEAdjustable Deadbolt For Double Cylinder ..................................219Adjustable Dblt For Single Cyl. & Patio ......................................217dEadBolts, arcHEdDouble Cylinder Deadbolt ............................................................215Double Cyl. Deadbolt – Keyed Alike Set Of 4 ...........................215Single Cylinder Deadbolt ..............................................................215Single Cyl. Deadbolt – Keyed Alike Set Of 4 .............................215dEadBolts, BronzEOval Single Cylinder Deadbolt ....................................................211Round Single Cylinder Deadbolt .................................................211Arched Single Cylinder Deadbolt ................................................211Bit Extender ....................................................................................211dEadBolts, BEtHpagEDouble Cylinder Deadbolt ............................................................214Double Cyl. Deadbolt – Keyed Alike Set Of 4 ...........................214Single Cylinder Deadbolt ..............................................................214Single Cyl. Deadbolt – Keyed Alike Set Of 4 .............................214dEadBolts, contEmporaryDouble Cylinder Deadbolt ............................................................213Double Cyl. Deadbolt – Keyed Alike Set Of 4 ...............................213Patio Deadbolt ...................................................................... 212, 213Single Cyl. Deadbolt – Keyed Alike Set Of 4 ...............................212Single Cylinder Deadbolt ..............................................................212Single Cylinder Deadbolt ..............................................................212Single Cylinder Deadbolt ..............................................................213Single Cyl. Dblt – Keyed Alike Set Of 4 .............................. 212, 213dEadBolts, conv. kits For New Mechanics ......................................................................217dEadBolts, cyl. & turnpiEcE componEntsBethpage Turn Knob ......................................................................219Contemporary Inside Cylinder Collar ..........................................219Contemporary Outside Cylinder Collar .......................................219Contemporary Turn Knob Assembly ...........................................219Cyl. And Tail Piece–Egress Handlesets ......................................219Cyl. & Tail Piece–Non–Egress Hndlst & Single Cyl. Dblts ..............219Cylinder Cap Tool ..........................................................................219Cylinder Tail Piece For Double Cylinder Deadbolt ....................219

229


mortisE – dEadlocksDouble Cylinder .............................................................................156Single Cylinder ..............................................................................156Turn Piece/Cylinder .......................................................................156mortisE, EuropEan trim .................................................156mortisE Bolt installation ...............................................52mortisE BoltsContemporary Mortise Bolt .............................................................46Contemporary Mortise Bolt .............................................................46Mortise Bolt – Less Turn Piece........................................................46Mortise Bolt – Less Turn Piece........................................................46Traditional Mortise Bolt ....................................................................46Traditional Mortise Bolt ....................................................................46mortisE locks – ElEctricalFail Safe (power off unlocks outside knob) ...................................157Fail Secure (power off locks outside knob) ...................................157mortisE locks – EntrancE FunctionsApartment Entrance ........................................................................151Electrified Strike Entrance ..............................................................151Entrance – Emergency Egress .......................................................151Entrance – Emergency Egress w/ Augiliary Latch .........................151Entrance Back–to–Back .................................................................151Entrance/Apartment........................................................................151Entrance/Storeroom .......................................................................151Hotel .......................................................................................151Public Entrance ..............................................................................151Residential Entrance .......................................................................151mortisE locks – gradE 1, ligHt–duty commErcialClassroom ......................................................................................153Classroom, Entrance or Office .......................................................153Dormitory Entrance or Storeroom .................................................153Entrance or Apartment ...................................................................153Entrance or Public Restroom .........................................................153Hotel or Motel ................................................................................153Key x Key Deadlock........................................................................153Key x Turn Deadlock ......................................................................153Passage or Closet ..........................................................................153Privacy, Bedroom or Bathroom......................................................153Single Key Deadlock ......................................................................153Store Door ......................................................................................153Storeroom or Closet.......................................................................153mortisE locks – How to ordEr ...................................149mortisE locks – spEciFications ..................................146mortisE(intErior) locks, HEavy dutyInterior Mortise Lock – Bath/Bedroom ..........................................155Interior Mortise Lock – Bath/Bedroom ..........................................155Interior Mortise Lock – Classroom ...............................................155Interior Mortise Lock – Corridor/Office .........................................155Interior Mortise Lock – Dormitory/Exit..........................................155Interior Mortise Lock – Emergency/Utility Room ..........................155Interior Mortise Lock – Entrance & Storeroom .............................155Interior Mortise Lock – Passage ....................................................155Interior Mortise Lock – Passage ....................................................155Interior Mortise Lock – Privacy .....................................................155Narrow Interior Mortise Lock – Bath/Bedroom .............................155Narrow Interior Mortise Lock – Bath/Bedroom .............................155Narrow Interior Mortise Lock – Passage .......................................155Narrow Interior Mortise Lock – Passage .......................................155mortisE(intErior) locks, small casEInterior Mortise Lock – Passage ....................................................154Interior Mortise Lock – Privacy .....................................................154T Strike for Small Case Mortise Locks ..........................................154multi–point American Cylinder Above Handle-7-1/4” CTC .............................182 American Cylinder Above Handle-8-1/2” CTC .............................190American Cyl. Below Handle – 8-3/8” CTC ..................................184American Cyl. Above/Below Handle – 7-9/16” CTC ..........................188Profile Cylinder Below Handle – 8-1/2” CTC ...............................180Profile Cylinder Below Handle – 7-7/8” CTC ...............................186multi–point trimHow To Order .................................................................................176multi–point trimThick Door Kits ..............................................................................199prE–drillEd door accEssoriEs2.125˝ Pre–drilled door adaptor ......................................................50Closet Spindle ..................................................................................50Dummy insert & filler plate ..............................................................50prE–drillEd doors...............................................................55

knoBs, BronzEFilagree Knob - K501 .....................................................................207Egg Knob - K511 ..........................................................................207Bevel Top Knob - K521 ..................................................................207Classic Knob - K531 ......................................................................207latcHEs – passagE Knob–Strength Passage latch ........................................................42Lever–Strength Passage latch ........................................................42latcHEs – privacyKnob–Strength Passage latch ........................................................42Lever–Strength Passage latch ........................................................42Privacy Button – Knobs ...................................................................42Privacy Button – Levers ...................................................................42Privacy Button Extender ...................................................................42lead–time policy.................................................................................1lEvErs, BronzEFilagree Lever - L501 .....................................................................208Wave Lever - L511 .........................................................................208Ball Tip Lever - L521 .....................................................................208Paddle Lever - L531.......................................................................208lEvErs ...................................................................................20-32Levers – 5100 ..................................................................................20Levers – 5101 ..................................................................................20Levers – 5103 ..................................................................................20Levers – 5104 ..................................................................................20Levers – 5105 ..................................................................................21Levers – 5106 ..................................................................................21Levers – 5107 ..................................................................................21Levers – 5108 ..................................................................................21Levers – 5109 ..................................................................................22Levers – 5112 ..................................................................................22Levers – 5113 ..................................................................................22Levers – 5114 ..................................................................................22Levers – 5115 ..................................................................................23Levers – 5116 ..................................................................................23Levers – 5117 ..................................................................................23Levers – 5118 ..................................................................................23Levers – 5121 ..................................................................................24Levers – 5122 ..................................................................................24Levers – 5125 ..................................................................................24Levers – 5130 ..................................................................................24Levers – 5132 ..................................................................................24Levers – 5135 ..................................................................................25Levers – 5136 ..................................................................................25Levers – 5137 ..................................................................................25Levers – 5138 ..................................................................................25Levers – 5141 ..................................................................................25Levers – 5152 ..................................................................................26Levers – 5161 ..................................................................................26Levers – 5162 ..................................................................................26Levers – 5164 ..................................................................................26Levers – 5165 ..................................................................................26Levers – 5166 ..................................................................................27Levers – 5168S ................................................................................29Levers – 5170S ................................................................................29Levers – 5172S ................................................................................29Levers – 5173S ................................................................................29Levers – 5177S ................................................................................29Levers – 5190 ..................................................................................27Levers – L001 ..................................................................................27Levers – L002 ..................................................................................27Levers – L003 ..................................................................................28Levers – L004 ..................................................................................28Levers – L005 ..................................................................................28Levers – L006 ..................................................................................28Levers – L007 ..................................................................................30Levers – L008 ..................................................................................30Levers – L009 ..................................................................................30Levers – L010 ..................................................................................30Levers – L011 ..................................................................................30Levers – L012 ..................................................................................31Levers – L013 ..................................................................................31Levers – L014 ..................................................................................31Levers – L015 ..................................................................................31Levers – L016 ..................................................................................31Levers – L017 ..................................................................................31Levers – L018 ..................................................................................32misc – rEplacEmEnt parts .............................................167

How to ordEr – split FinisHEs/stylEs ....................11indEx – EntrancE trim ..........................................................3installation – dummy .......................................................220installation – passagE ....................................................221installation – privacy .....................................................223installation toolsAligning Bushing (box of 50) ..........................................................52Aligning Tool & Bushing .................................................................52Socket Wrench .................................................................................52Spanner Tool ....................................................................................52kEying kits#0 – #9 bottom pins (100 each per pack) .....................................174#1–3 top pins (100 each per pack) ...............................................174#2 – #9 master pins (100 each per pack) ......................................174Adams rite cams ............................................................................174Cam mounting screws ...................................................................174Cap .......................................................................................174Cap tool .......................................................................................174Cylinder plug follower....................................................................174Finish demonstrator .......................................................................174Hotel pin .......................................................................................174Key gauge .......................................................................................174Large keying kit for all (C )keying ..................................................174Mounting plate ...............................................................................174Mounting screws ...........................................................................174Pins .......................................................................................174Small keying kit for keying (C) cylinders alike ...................................174Spacer .......................................................................................174Spring covers .................................................................................174Spring covers .................................................................................174Springs .......................................................................................174Standard cams ...............................................................................174Stile–right template ........................................................................174Tailpiece – double cylinder ............................................................174Tailpiece – emergency exit .............................................................174Tailpiece – single cyl. ....................................................................174Tailpiece (long) ...............................................................................174Tailpiece (regular) ..........................................................................174Tailpiece plate .................................................................................174Tumbler springs .............................................................................174Tweezers .......................................................................................174Washer .......................................................................................174knoB/lEvEr pinning ..............................................................11knoBs ...................................................................................12-19Knobs – 5000 ..................................................................................12Knobs – 5001 ..................................................................................12Knobs – 5005 ..................................................................................12Knobs – 5007 ..................................................................................12Knobs – 5008 ..................................................................................12Knobs – 5009 ..................................................................................13Knobs – 5011 ..................................................................................13Knobs – 5012 ..................................................................................13Knobs – 5013 ..................................................................................13Knobs – 5015 ..................................................................................13Knobs – 5020 ..................................................................................14Knobs – 5022 ..................................................................................14Knobs – 5023 ..................................................................................14Knobs – 5025 ..................................................................................14Knobs – 5030 ..................................................................................14Knobs – 5031 ..................................................................................15Knobs – 5039 ..................................................................................15Knobs – 5040 ..................................................................................15Knobs – 5041 ..................................................................................15Knobs – 5045 ..................................................................................15Knobs – 5050 ..................................................................................16Knobs – 5055 ..................................................................................16Knobs – 5055s ................................................................................19Knobs – 5057 ..................................................................................16Knobs – 5060 ..................................................................................16Knobs – 5061s ................................................................................19Knobs – 5063 ..................................................................................16Knobs – 5064 ..................................................................................17Knobs – 5065 ..................................................................................17Knobs – 5066 ..................................................................................17Knobs – 5067 ..................................................................................17Knobs – 5068 ..................................................................................17Knobs – 5069 ..................................................................................18Knobs – 5072 ..................................................................................18Knobs – 5073 ..................................................................................18

231


rosEttEs – 50462.625˝ Dummy – Half Pair .............................................................332.625˝ Dummy – Pair ......................................................................332.625˝ Passage – Half Pair .............................................................332.625˝ Passage – Pair .....................................................................33rosEttEs – 50472.625˝ Dummy – Half Pair .............................................................372.625˝ Dummy – Pair .....................................................................372.625˝ Passage – Half Pair .............................................................372.625˝ Passage – Pair ....................................................................37rosEttEs – 50482.625˝ Dummy – Half Pair .............................................................322.625˝ Dummy – Pair ......................................................................322.625˝ Passage – Half Pair .............................................................322.625˝ Passage – Pair .....................................................................32rosEttEs – 50532.625˝ Dummy – Half Pair .............................................................352.625˝ Dummy – Pair .....................................................................352.625˝ Passage – Half Pair .............................................................352.625˝ Passage – Pair ....................................................................35rosEttEs – 50562˝ Dummy – Half Pair ......................................................................372˝ Dummy – Pair ............................................................................372˝ Passage – Half Pair ....................................................................372˝ Passage – Pair ...........................................................................37rosEttEs – 5056s2˝ Dummy – Half Pair .....................................................................412˝ Dummy – Pair ............................................................................412˝ Passage – Half Pair ....................................................................412˝ Passage – Pair ...........................................................................41rosEttEs – 50582.625˝ Dummy – Half Pair .............................................................372.625˝ Dummy – Pair .....................................................................372.625˝ Passage – Half Pair .............................................................372.625˝ Passage – Pair ....................................................................37rosEttEs – 50592.63˝ x 4.125˝ Dummy – Half Pair .................................................372.63˝ x 4.125˝ Dummy – Pair ........................................................372.63˝ x 4.125˝ Passage – Half Pair ................................................372.63˝ x 4.125˝ Passage – Pair .......................................................37rosEttEs – 50621.75˝ Dummy – Half Pair ...............................................................341.75˝ Dummy – Pair .......................................................................341.75˝ Passage – Half Pair ...............................................................341.75˝ Passage – Pair ......................................................................34rosEttEs – 50702.625˝ Dummy – Half Pair .............................................................332.625˝ Dummy – Pair .....................................................................332.625˝ Passage – Half Pair .............................................................332.625˝ Passage – Pair ....................................................................33rosEttEs – 50712˝ Dummy – Half Pair .....................................................................382˝ Dummy – Pair ............................................................................382˝ Passage – Half Pair ....................................................................382˝ Passage – Pair ...........................................................................38rosEttEs – 50742.63˝ x 3.94˝ Dummy – Half Pair ...................................................382.63˝ x 3.94˝ Dummy – Pair ..........................................................382.63˝ x 3.94˝ Passage – Half Pair ..................................................382.63˝ x 3.94˝ Passage – Pair ..........................................................38rosEttEs – 50752.625˝ Dummy – Half Pair .............................................................352.625˝ Dummy – Pair .....................................................................352.625˝ Passage – Half Pair .............................................................352.625˝ Passage – Pair ....................................................................35rosEttEs – 50762.625˝ Dummy – Half Pair .............................................................362.625˝ Dummy – Pair .....................................................................362.625˝ Passage – Half Pair .............................................................362.625˝ Passage – Pair ....................................................................36rosEttEs – 50782.625˝ Dummy – Half Pair .............................................................362.625˝ Dummy – Pair .....................................................................362.625˝ Passage – Half Pair .............................................................362.625˝ Passage – Pair ....................................................................36

rosEttEs – 50212.625˝ Dummy – Half Pair .............................................................342.625˝ Dummy – Pair .....................................................................342.625˝ Passage – Half Pair .............................................................342.625˝ Passage – Pair ....................................................................34rosEttEs – 50262.75˝ Dummy – Half Pair ...............................................................342.75˝ Dummy – Pair .......................................................................342.75˝ Passage – Half Pair ...............................................................342.75˝ Passage – Pair ......................................................................34rosEttEs – 50272.25˝ Dummy – Half Pair ...............................................................35 2.25˝ Dummy – Pair .......................................................................35 2.25˝ Passage – Half Pair ...............................................................35 2.25˝ Passage – Pair ......................................................................35rosEttEs – 50282˝ Dummy – Half Pair .....................................................................352˝ Dummy – Pair ............................................................................352˝ Passage – Half Pair ....................................................................352˝ Passage – Pair ...........................................................................35rosEttEs – 50292.625˝ x 3.94˝ Dummy – Half Pair ................................................352.625˝ x 3.94˝ Dummy – Pair .......................................................352.625˝ x 3.94˝ Passage – Half Pair ...............................................352.625˝ x 3.94˝ Passage – Pair ......................................................35rosEttEs – 50322.125˝ Dummy – Half Pair .............................................................332.125˝ Dummy – Pair .....................................................................332.125˝ Passage – Half Pair .............................................................332.125˝ Passage – Pair ....................................................................33rosEttEs – 5032s2.125˝ Dummy – Half Pair .............................................................412.125˝ Dummy – Pair .....................................................................412.125˝ Passage – Half Pair .............................................................412.125˝ Passage – Pair ....................................................................41rosEttEs – 5033s2.625˝ Dummy – Half Pair .............................................................412.625˝ Dummy – Pair .....................................................................412.625˝ Passage – Half Pair .............................................................412.625˝ Passage – Pair ....................................................................41rosEttEs – 5034s1.75˝ Dummy – Half Pair ...............................................................411.75˝ Dummy – Pair .......................................................................411.75˝ Passage – Half Pair ...............................................................411.75˝ Passage – Pair ......................................................................41rosEttEs – 50352˝ Dummy – Half Pair .....................................................................352˝ Dummy – Pair ............................................................................352˝ Passage – Half Pair ....................................................................352˝ Passage – Pair ...........................................................................35rosettes – 50362.43˝ Dummy – Half Pair ...............................................................362.43˝ Dummy – Pair ......................................................................362.43˝ Passage – Half Pair ..............................................................362.43˝ Passage – Pair .....................................................................36rosettes – 50371.75˝ Dummy – Half Pair ...............................................................361.75˝ Dummy – Pair .......................................................................361.75˝ Passage – Half Pair ...............................................................36rosEttEs – 50382˝ Dummy – Half Pair .....................................................................362˝ Dummy – Pair ............................................................................362˝ Passage – Half Pair ....................................................................362˝ Passage – Pair ...........................................................................36rosEttEs – 50422.63˝ x 4.125˝ Dummy – Half Pair .................................................362.63˝ x 4.125˝ Dummy – Pair ........................................................362.63˝ x 4.125˝ Passage – Half Pair ................................................362.63˝ x 4.125˝ Passage – Pair .......................................................36rosEttEs – 50442˝ Dummy – Half Pair .....................................................................372˝ Dummy – Pair ............................................................................372˝ Passage – Half Pair ....................................................................372˝ Passage – Pair ...........................................................................37

privacy Buttons – See Latches – PrivacyproFilE cylindEr – See Multi–Pointrim locks – accEssoriEsBlocking Rings ..............................................................................205Bit Key .......................................................................................205Colonial Emergency Release Trim & Key ......................................205Cylinder Lock Cover Plate .............................................................205Emergency Release Key .................................................................205Key Plate .......................................................................................205Solid Brass Spacer .........................................................................205Wrought Cylinder Collar for Rim Locks ........................................205rim locks – EntrancE, spEcial FunctionBevelled Rim Lock .........................................................................203Entrance Door Rim Lock ................................................................203Hollow Metal Doors Rim Lock.......................................................203Horizontal Cylinder Lock ...............................................................203rim locks – passagE, privacy & EntrancE7˝ Horizontal Rim Lock ................................................................202Small Horizontal Rim Lock ............................................................202Small Vertical Rim Lock ................................................................202rim locks – standards & spEcs ..................................201rim locks – trimExterior Lock Plate .........................................................................204Keeper (Standard Strike) ................................................................204Reverse Bevel Keeper (Strike) ........................................................204Scuff Plate ......................................................................................204rosEttEs – 50021.75˝ Dummy – Half Pair ...............................................................321.75˝ Dummy – Pair ........................................................................321.75˝ Passage – Half Pair ...............................................................321.75˝ Passage – Pair .......................................................................32rosEttEs – 50032˝ Dummy – Half Pair .....................................................................322˝ Dummy – Pair .............................................................................322˝ Passage – Half Pair ....................................................................322˝ Passage – Pair ............................................................................32rosEttEs – 50042.625˝ Dummy – Half Pair .............................................................322.625˝ Dummy – Pair ......................................................................322.625˝ Passage – Half Pair .............................................................322.625˝ Passage – Pair .....................................................................32rosEttEs – 50061.75˝ Dummy – Pair .......................................................................331.75˝ Passage – Half Pair ...............................................................331.75˝ Passage – Half Pair ...............................................................331.75˝ Passage – Pair ......................................................................33rosEttEs – 50102˝ Dummy – Half Pair .....................................................................332˝ Dummy – Pair ............................................................................332˝ Passage – Half Pair ....................................................................332˝ Passage – Pair ...........................................................................33rosEttEs – 50141.5˝ x 2.25˝ Dummy – Half Pair .....................................................331.5˝ x 2.25˝ Dummy – Pair ...........................................................331.5˝ x 2.25˝ Passage – Half Pair ...................................................331.5˝ x 2.25˝ Passage – Pair ...........................................................33rosEttEs – 50161.75˝ Dummy – Half Pair ...............................................................341.75˝ Dummy – Pair .......................................................................341.75˝ Passage – Half Pair ...............................................................341.75˝ Passage – Pair ......................................................................34rosettes – 50172.25˝ Dummy – Half Pair ...............................................................322.25˝ Dummy – Pair ........................................................................322.25˝ Passage – Half Pair ...............................................................322.25˝ Passage – Pair .......................................................................32rosEttEs – 5018 ...........................................................................1.75˝ Dummy – Half Pair ...............................................................341.75˝ Dummy – Pair .......................................................................341.75˝ Passage – Half Pair ...............................................................341.75˝ Passage – Pair ......................................................................34rosEttEs – 50192.625˝ Dummy – Half Pair .............................................................342.625˝ Dummy – Pair .....................................................................342.625˝ Passage – Half Pair .............................................................342.625˝ Passage – Pair ....................................................................34

231


rosEttEs – 51602˝ Privacy – Half Pair ......................................................................372˝ Privacy – Pair .............................................................................37rosEttEs – 5160s 2˝ Privacy – Half Pair .......................................................................412˝ Privacy – Pair ..............................................................................41rosEttEs – 51712˝ Privacy – Half Pair ......................................................................382˝ Privacy – Pair .............................................................................38singlE cylindEr – See Cylinderssliding door locks ............................................................171sparE partsActive Trim Back Plate ......................................................................51Colonial Screw Cover ......................................................................51Contemporary Screw Cover.............................................................51Dummy Trim Plate ...........................................................................51Graphite Impregnated Nylon Spacer................................................51Rose Retainer ...................................................................................51Set Screws ........................................................................................51Solid Brass Spacer ...........................................................................51Thimble .........................................................................................51spindlEsHalf Dummy Rigid Mounting...........................................................44Full Dummy Back Plate ...................................................................44Half Dummy Back Plate ...................................................................44Transitional Half Dummy Back Plate ...............................................44Closet Spindle ..................................................................................44Straight Passage ..............................................................................45Swivel Privacy ..................................................................................45Transitional Half Dummy Escutcheon..............................................44Half Dummy Spindle ........................................................................44Half Dummy Spindle ........................................................................44Transitional Half Front Door .............................................................45Transitional Straight – Passage .......................................................45Transitional Swivel Spindles – Privacy ...........................................45spindlEs & adaptors – dummy EscutcHEonHalf Dummy Spindle ........................................................................44 Half Dummy Spindle ........................................................................44 Full Dummy Adaptor ........................................................................44 Half Dummy Spindle ........................................................................44spindlEs (HalF) – Front doorBroached half ...................................................................................45Strike Deadlock ..............................................................................159strikEsASA Strike ......................................................................................43Combination Privacy Strike .............................................................43Extended Full Lip Strike ...................................................................43Extended Lip Box Strikes .................................................................43Full Lip Strike ..................................................................................43Standard Box Strike .........................................................................43strikEs asa – curvEd lip – 1.25 ̋lip–to–cEntEr 2.75˝ backset latch only ................................................................159 2.75˝ backset latch, deadbolt ........................................................159 2.75˝ backset latch, deadbolt, aux latch .......................................1591.5,˝ 2,˝ 2.5˝ backset latch only ..................................................1591.5,˝ 2,˝ 2.5˝ backset latch, deadbolt ..........................................159strikEs asa – straigHt lip – 1.25 ̋lip–to–cEntEr 2.75˝ backset latch only ................................................................159 2.75˝ backset latch, deadbolt ........................................................159 2.75˝ backset latch, deadbolt, aux latch .......................................1591.5,˝ 2,˝ 2.5˝ backset latch only ..................................................1591.5,˝ 2,˝ 2.5˝ backset latch, deadbolt ..........................................159Dust Box for use with mortise locks ..............................................159asa strikEs – ExtEndEd lip2.75˝ backset latch only .................................................................1592.75˝ backset latch, deadbolt .........................................................1592.75˝ backset latch, deadbolt, aux latch ........................................1591.5,˝ 2,˝ 2.5˝ backset latch only ..................................................1591.5,˝ 2,˝ 2.5˝ backset latch, deadbolt ..........................................1591.5,˝ 2,˝ 2.5˝ backset, rabbeted strike .........................................159taBlE oF contEnts ...................................................................2tHick door kits .....................................................................144tHick door kits – multi–point trim ..........................186tHin door kits .......................................................................145tHin door kits – tuBular ................................................145

tools & accEssoriEs1/8˝ Allen Wrench Used To Tighten Set Screws ...........................174Aligning Tool ..................................................................................174Alignment Bushing (Bag Of 50)....................................................174Cylinder Plug Follower Included With Keying Kits .......................174Cylinder Reinforcing Plug..............................................................174Depth Key Set, Furnished With 10 Keys ........................................174Lock Reversing Block ...................................................................174Punch Used To Stake Spring Covers On Cylinders ......................174Tru–Arc Pliers ...............................................................................174Tweezers For Gripping Cylinder Pins ...........................................174tuBular – EntrancE sEts ..................................................56tuBular latcH installation w/aligning BusHing ...52turn knoBs ...............................................................................48turn piEcEs ...............................................................................47ul kit For EstatE passagE or privacy sEts ............42

rosEttEs – 51192.625˝ Privacy – Half Pair ..............................................................342.625˝ Privacy – Pair ......................................................................34rosEttEs – 51232.625˝ Privacy – Half Pair ..............................................................332.625˝ Privacy – Pair ......................................................................33rosEttEs – 51262.75˝ Privacy – Half Pair ................................................................342.75˝ Privacy – Pair ........................................................................34rosEttEs – 51272.625˝ Privacy – Half Pair ..............................................................352.625˝ Privacy – Pair ......................................................................35rosEttEs – 51292.625˝ Privacy – Half Pair ..............................................................362.625˝ Privacy – Pair ......................................................................36rosEttEs – 5133s2.625˝ Privacy – Half Pair ..............................................................412.625˝ Privacy – Pair ......................................................................41rosEttEs – 51342.625˝ Privacy – Half Pair ..............................................................362.625˝ Privacy – Pair ......................................................................36rosEttEs – 51392.125˝ Privacy – Half Pair ..............................................................332.125˝ Privacy – Pair .......................................................................33rosEttEs – 5139s2.125˝ Privacy – Half Pair ..............................................................412.125˝ Privacy – Pair ......................................................................41rosEttEs – 51402˝ Privacy – Half Pair ......................................................................372˝ Privacy – Pair .............................................................................37rosEttEs – 51422.63˝ x 4.125˝ Privacy – Half Pair ...................................................362.63˝ x 4.125˝ Privacy – Pair .........................................................36rosEttEs – 51432.63˝ x 3.94˝ Privacy – Half Pair ....................................................382.63˝ x 3.94˝ Privacy – Pair ...........................................................38rosEttEs – 51442.625˝ x 3.94˝ Privacy – Half Pair .................................................352.625˝ x 3.94˝ Privacy – Pair ........................................................35rosEttEs – 51452.625˝ Privacy – Half Pair ..............................................................342.625˝ Privacy – Pair ......................................................................34rosEttEs – 51462.625˝ Privacy – Half Pair ..............................................................332.625˝ Privacy – Pair .......................................................................33rosEttEs – 51472.625˝ Privacy – Half Pair ..............................................................372.625˝ Privacy – Pair ......................................................................37rosEttEs – 51482.625˝ Privacy – Half Pair ..............................................................322.625˝ Privacy – Pair .......................................................................32rosEttEs – 51492.625˝ Privacy – Half Pair ..............................................................322.625˝ Privacy – Pair ......................................................................32rosEttEs – 51512˝ Privacy – Half Pair ......................................................................332˝ Privacy – Pair .............................................................................33rosEttEs – 51532.625˝ Privacy – Half Pair ..............................................................352.625˝ Privacy – Pair ......................................................................35rosEttEs – 51552˝ Privacy – Half Pair ......................................................................352˝ Privacy – Pair .............................................................................35rosEttEs – 51562˝ Privacy – Half Pair ......................................................................352˝ Privacy – Pair .............................................................................35rosEttEs – 51572˝ Privacy – Half Pair ......................................................................362˝ Privacy – Pair .............................................................................36rosEttEs – 51582.625˝ Privacy – Half Pair ..............................................................372.625˝ Privacy – Pair ......................................................................37rosEttEs – 51592.63˝ x 4.125˝ Privacy – Half Pair ..................................................372.63˝ x 4.125˝ Privacy – Pair .........................................................37

TERMS: 2%/10 Days, Net/30

SHIPMENTS: U.S. customers - F.O.B. Charlotte, NC or Reading, Pa. Full freight allowed on purchase orders of $1,000 net invoice value, sent through routing of our selection. Delivery is made to curb or dock side only. Freight allowed shipments to Alaska will be prepaid to Seattle, to Hawaii will be prepaid to San Fransisco, and to Puerto Rico will be prepaid to Miami. Upon delivery to the transportation company, shipments become the property of the purchasers, who assume full risk for loss or damage in transit.International Customers - Orders of $1,000 net invoice value will ship FCA to city specified on the commercial invoice. Orders of less than $1,000 net value will ship ExW. Exceptions will be subject to the INCO terms stated on the commercial invoice. Candian customers should contact their sales reps for variations to these terms.

CLAIMS: All claims, whether referring to errors in prices, or in filling orders or for defective goods, must be submitted IN WRITING within 30 days after receipt of shipment. Tracing of all lost shipments must be submitted IN WRITING within 30 days or the liability and risk is placed on the purchasers. All issued documents by a carrier confirming receipt of a ship-ment must be honored by the purchasers.

RETURNED GOODS: Returned goods will not be accepted unless authorized in writing by Baldwin within 120 days of invoice date. A minimum 25% handling charge and freight will be charged on all stock items returned in original condition. Special and custom products are not returnable for credit. An 80% handling charge will be imposed on products dam-aged. No credit will be given for items returned without written authorization, nor will the items be returned to the customer. Authorized returns become void after a period of 30 days from issue date of the Returned Goods Authorization. All credit returns must be shipped to us, FREIGHT PREPAID.

ORDERS: Orders of less than $250.00 net will automatically incur a $15.00 surcharge. Most orders for stock items will be shipped within four (4) weeks from receipt of order. To expedite customer orders, items unavailable from stock at time of shipment will be back-ordered unless otherwise noted by customer. Quantities of a particular item will be rounded to the next full box quantity without incurring any obligations for credit. We reserve the right to decline the whole or part of orders in which the price, finishes or quantity of goods is not satisfactory to us. We reserve the right to discontinue items or change specifications at any time without notice and without incurring any obligations. The corporation cannot be liable for extended delivery dates which may result in the cancellation of an order.

CANCELLATIONS: While Baldwin will attempt to comply with customer’s telephone or writ-ten change orders and/or cancellations, we cannot guarantee that they can be accomplished before shipment. Appropriate handling charges on returns will be exercised if the order has been shipped before processing a change order request.

PRICES: The price list in effect on the date customer order is received will determine billing price. Orders requiring delivery in excess of three (3) months will be billed at prices in effect at time of shipment, unless quoted to the contrary in writing by our company.

Orders being held by Baldwin because of account credit status may be repriced to the price in effect the day the order is released by the Baldwin Credit Department.

TEMPLATES: Kick Plates and custom formed Push and Pull Bars are not made to template. If required, the actual products will be forwarded to the door manufacturer. Templates of catalog products are available upon request.

SPECIFICATIONS: Packing, weights, measurements, and design are subject to change with-out notice.

SPECIAL FINISHES: For availability and pricing of finishes other than those listed, consult the Hardware Technical Services Department.

SPECIAL FABRICATION: Items of Special Manufacture are not cancelable after a period of 72 hours from receipt of an order. A cancellation of this nature will result in a penalty charge equal to the total expenses incurred on the product. Delivery on orders of special fabrication cannot be guaranteed due to variables beyond our control. The corporation cannot be liable for extended deliveries on special orders and consequently, are not cancelable.

LIMITED LIFETIME MECHANICAL WARRANTY: Baldwin warrants that each Baldwin prod-uct shall be free from mechanical defects for a period of 3 years from time of purchase.

LIMITED LIFETIME FINISH™ WARRANTY: The Baldwin Lifetime Finish uses advanced finishing technology (physical vapor deposition) to create a finish highly resistant to the effects of weather and normal wear and tear. The Limited Lifetime Finish Warranty on Lifetime Finish™ products covers the original purchaser for as long as you own your home.

LIMITED FINISH WARRANTY: The finish on Baldwin products (excluding Lifetime Finish and living finish products) is protected by a durable topcoat designed to maintain the beauty and quality of the Baldwin product. The Baldwin Limited Finish Warranty covers the original purchaser for five years from date of purchase for interior use and one year for exterior use.

LIVING FINISHES: Due to the nature of Baldwin living finish products, they will wear over time and may already have begun the process before reaching your home. No finish warranty is offered on living finish products, which are designed to age and improve over time. Living finishes include raw brass, oil rubbed bronze, stainless steel, and other non-lacquered or non-PVD finishes.

Refer to www.baldwinhardware.com for a complete warranty statement.

important! you must install Baldwin strikeplate or your warranty is void.

Except as expressly provided in this warranty to the contrary, (a) BALDWIN MAKES NO, AND DISCLAIMS ALL, WARRANTIES, REPRESENTATIONS AND GUARANTEES (WHETHER ExPRESS, IMPLIED OR STATUTORY), INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND (b) BALDWIN SHALL NOT BE OBLIGATED OR LIABLE FOR LABOR OR OTHER COSTS RE-LATED TO INSTALLATION, REPAIR OR REPLACEMENT OR FOR LOSS OF, OR DAMAGE TO, ANY MATERIAL WHICH IS NOT SOLD BY BALDWIN. IN NO EVENT SHALL THE DURATION OF ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE BE LONGER THAN the lifetime of the applicable product or for as long as the original purchaser owns the product. This warranty is the only express warranty provided by Baldwin. No employee, representative or agent nor any other person has authority to assume or incur on behalf of Baldwin any obligation or liability in place of or in addition to this warranty.

Each of Baldwin’s direct customers shall receive any claims and take delivery of any alleg-edly defective Baldwin products from the consumers and shall communicate and otherwise cooperate in a reasonable manner with Baldwin concerning the administration, processing and remedying of such claims, including, but not limited to, delivering repaired or replace-ment Baldwin products or, in the appropriate case, purchase price refunds to consumers. Please Note: The limited warranty on all locks or latches is void if used in combination with knobs, levers or trim of other than those manufactured by Baldwin and designated for use with the applicable locks or latches.

STANDARDS OF ExCELLENCE: Baldwin Hardware Corporation has produced a range of products in accordance to the HIGHEST AMERICAN STANDARDS OF QUALITY AND Ex-CELLENCE. All brass products are manufactured from the finest quality brass obtainable; however, these products are susceptible to indentation and imperfections due to the mal-leability of the material and the elements of human intervention when crafting the product. Although our internal safeguards protect us against shipping products of unacceptable quality, an imperfection or surface blemish may be considered the highest Quality Standard obtainable on a particular product. Baldwin is committed to producing each item to the most stringent guidelines and quality of human ability and excellence; however, all final de-cisions of Quality remain exclusively in the authorization of the Corporation. While Baldwin makes every effort to provide an accurate price list, we are not responsible for errors and/or omissions which may appear. Customers will be invoiced the actual price on all orders.

conditions ofsale

baldwinhardware.com

19701 da vinci . lake foreST . california . 92610

1.800.437.7448

©2007 BALDWIN HARDWARE CoRP. READINg, PA. USA

9919.999.082

Date post:	22-Nov-2014
Category:	Documents
Upload:	anthony-ameeral
View:	349 times
Download:	0 times

Esate_Pricebook_09

Documents