+ All Categories
Home > Documents > ESM101 Floor Dryer - eikseng.com · ESM101 Floor Dryer AD002model Stock Code : 881107003 HAWK Floor...

ESM101 Floor Dryer - eikseng.com · ESM101 Floor Dryer AD002model Stock Code : 881107003 HAWK Floor...

Date post: 22-Jan-2020
Category:
Upload: others
View: 2 times
Download: 0 times
Share this document with a friend
1
*** Product’s specification may subject to change without futher notice. *** Actual product may slightly differ from pictures shown. (20/03/15) ESM101 Floor Dryer AD002 model Stock Code : 881107003 HAWK Floor Dryer with Handle is characterized by easy operation, safety in use, and optimum drying or ventilation effects. It especially applies to Hotels, Wineshops, Office Buildings, Exhibition venues and large public places. It is used for drying of cleaned Carpets and Floors and ventilation and heat dissipation.The design of the extendible pull rod facilities move. The HAWK floor dryer with handle AD002 switch is a three-shift switch. The switch position symbols are “O”, “L” “M” and “H”. with handle specification Power Voltage / Frequency Delivery Impeller Size Gross Weight Net Weight Carton Size 900 W 220 - 240V / 50Hz 110, 130 , 160 m³/ min 270 mm 18.8 kg 17.8 kg 550 x 400 x 600 mm Rotate the dot on the switch in the red shift. The indication “O” indicates stop. The indication “L” indicates Shift 1. The indication “M” indicates Shift 2. The indication “H” indicates Shift 3.
Transcript

*** Product’s specification may subject to change without futher notice.*** Actual product may slightly differ from pictures shown. (20/03/15)

ESM101

Floor Dryer

AD002model

Stock Code : 881107003

HAWK Floor Dryer with Handle is characterized by easy operation, safety in use,and optimum drying or ventilation effects. It especially applies to Hotels,Wineshops, Office Buildings, Exhibition venues and large publicplaces. It is used for drying of cleaned Carpets and Floors andventilation and heat dissipation.The design of the extendiblepull rod facilities move.

The HAWK floor dryer with handle AD002 switch is athree-shift switch. The switch position symbolsare “O”, “L” “M” and “H”.

with�handle

specificationPowerVoltage / FrequencyDeliveryImpeller SizeGross WeightNet WeightCarton Size

900 W220 - 240V / 50Hz

110, 130 , 160 m³/ min270 mm18.8 kg17.8 kg

550 x 400 x 600 mm

Rotate the dot on the switch in the red shift.The indication “O” indicates stop. The indication “L”indicates Shift 1. The indication “M” indicates Shift 2.The indication “H” indicates Shift 3.

Recommended