Date post: | 26-Mar-2016 |
Category: |
Documents |
Upload: | est-environmental-science-technologies |
View: | 223 times |
Download: | 7 times |
Subsidiary Companies
Corporate Offices P: +1 (603) 378-0809 4 Wilder Drive, #7 Plaistow NH 03865 F: +1 (603) 378-0824
Response Cleanup Detection Containment Remediation
EST Environmental Science & Technologies, Inc., is a growth oriented holding company dedicated
to environmental, safety & security technologies. EST seeks out emerging and next generation
clean tech products, technologies and companies dedicated to our core competencies. The growth
plans are to license, acquire and/or merge with like-minded and dedicated environmental entrepre-
neurs.
Today, EST is a rapidly growing, privately held company that has evolved into a global provider of
environmental control products and solutions that meet the needs of a wide range of industries and
markets including government (defense), oil and gas, manufacturing, and pharmaceutical.
EST’s synergistic products are sold through its various business units, providing hazardous and
non-hazardous waste packaging, industrial containers, spill control, and detection solutions that
contribute to the safety and security of our environment.
Environmental Industrial Spill Control Government
Packaging Containers & Prevention & Defense Supply
Oil Spill Soil Spill Response Oil & Gas
Detection Remediation Remediation Asset protection
D e t e c t i o nD e t e c t i o nD e t e c t i o n
R e s p o n s eR e s p o n s eR e s p o n s e
D e p l o y m e n tD e p l o y m e n tD e p l o y m e n t C o n t a i n m e n t C o n t a i n m e n t C o n t a i n m e n t
C l e a nC l e a nC l e a n --- U pU pU p R e m e d i a t i o nR e m e d i a t i o nR e m e d i a t i o n
SpillCon Solutions™ is a Leading Manufacturer and Provider of Environmental Control Products
Pipeline and Power line Monitoring
Oil, gas, utility companies Chemical and petrochemical Pipeline operators Refineries and drillers
Security, Safety and Control
Facilities and equipment security Pipeline security Production and refineries Perimeter security
Photography and mapping
Topography mapping Aerial photography Asset geo-location Urban development
Environmental Protection
Oil and gas leak detection Waste disposal and management Renewable resources Onshore and offshore drilling
RADS is an industry leader in surveillance and security solutions involving ground and aerial reconnaissance using the most advanced and capable multi-role, special mission, equipment
and sensors available in the world.
HAZARDOUS WASTE • NON-HAZARDOUS •
TransPack™ DrumPack™
Cubic Yard Liner
SSSPECIALISTSPECIALISTSPECIALISTS INININ UN W UN W UN WASTEASTEASTE P P PACKAGINGACKAGINGACKAGING
EnviroPack Technologies, offers its customers a complete line of UN/DOT approved con-tainers such as the HazPack, WastePack, and HexPack brands in addition to its Non-UN boxes and containers including the BulbPack lamp/bulb recycling containers and corrugated boxes.
BulbPack™ HexPack™
Non-UN
Corrugated Boxes
WasteSack™ WastePack™ HazPack™
A n E N C O I n d u s t r i e s C o m p a n y
STORAGE • HANDLING • TRANSPORTATION • WASTE DISPOSAL
Industrial Container Supply (ICS) is a leader in industrial containment and waste disposal products.
For years ICS, has earned the reputation as a trusted supplier of industrial containment products to the U.S. Department of Defense and commercial enterprises alike. We have years of experience delivering solutions that best fit our customer’s needs.
ICS offers one-stop shopping, quick response, and fast delivery. What’s more, we have knowledgeable staff who can help you with your specific containment requirements. Trust us to recommend and deliver the right container for your business.
IBC/Totes Poly Overpacks Pails
Fiber Drums Plastic Drums Steel Drums
Innovative Boom composition delivers exceptional performance utilizing UV resistant polyester net-ting and high tensile strength rope to help eliminate boom roll.
Pillows and Socks are extremely effective for water or land applications. Non-absorbing water Pil-lows float on water and our Socks are capable of rapid absorption while exhibiting superior strength.
Oil Only Melt Blown Pads and Rolls come in a variety of weights and sizes. They can also be bonded or perforated for any job, spill, or day-to-day maintenance requirements.
55 Gallon Sorbent Drum covers are designed to catch drips and spills that occur when dispensing various types of hydrocarbon material.
Hazmat Mats and Rolls are used to absorb very aggressive fluids such as acids and caustic fluids in addition to non-aggressive fluids. They are yellow in color to denote hazmat or caution.
A Leading Meltblown Sorbent Manufacturer
Sorbent Rail Mats are custom designed and are used to effectively manage drips and leaks in train maintenance areas.
About Us Today, SpillCon Solutions is a rapidly growing, privately held company that has evolved into a global provider of environmental control products and solutions that meet the needs of a wide range of industries and markets including government (defense), oil and gas, manufacturing, and pharma-ceutical.
The company’s synergetic products are sold thru its various business units, providing hazardous and nonhazardous waste packaging, industrial container, spill control, and detection solutions that contribute to the safety and security of our environment.
MB WHITE OIL ONLY PADS ITEM # TYPE FORMAT SIZE UNIT/CASE QTY/PALLET
SPWOKH50 Pads Heavy King 30" X 40" (76 cm x 102 cm) 50 15
SPWOEH100 Pads Extra Heavy 15" X 18" (38 cm x 46 cm) 100 30
SPWOH100 Pads Heavy 15" X 18" (38 cm x 46 cm) 100 30
SPWOH100D Pads Heavy Dimpled 15" X 18" (38 cm x 46 cm) 100 30
SPWOM100 Pads Medium 15" X 18" (38 cm x 46 cm) 100 40
SPWOM100D Pads Medium Dimpled 15" X 18" (38 cm x 46 cm) 100 40
SPWOS100 Pads Single 15" X 18" (38 cm x 46 cm) 100 50
SPWOS200 Pads Single 15" X 18" (38 cm x 46 cm) 200 30
MB GRAY UNIVERSAL SORBENT PADS
ITEM # TYPE FORMAT SIZE UNIT/CASE QTY/PALLET
SPGUKH50 Pads Heavy King 30" X 40" (76 cm x 102 cm) 50 15
SPGUH100D Pads Heavy Dimpled 15" X 18" (38 cm x 46 cm) 100 30
SPGUM100D Pads Medium Dimpled 15" X 18" (38 cm x 46 cm) 100 40
SPGUS200 Pads Single 15" X 18" (38 cm x 46 cm) 200 30
MB YELLOW HAZMAT SORBENT PADS
ITEM # TYPE FORMAT SIZE UNIT/CASE QTY/PALLET
SPYHH100D Pads Heavy Dimpled 15" X 18" (38 cm x 46 cm) 100/Bale 30
MB WHITE OIL ONLY ROLLS
ITEM # TYPE FORMAT SIZE UNIT/CASE QTY/PALLET
SRWOH36144 Rolls White Heavy 36" X 144' (91 cm x 43 m) 1 18
SRWOHD36144 Rolls Heavy Dimpled 36" X 144' (91 cm x 43 m) 1 18
SRWOHDS18144 Rolls Heavy Dimpled Split 18" X 144' (46 cm x 43 m) 2 18
SRWOM36144 Rolls Medium 36" X 144' (91 cm x 43 m) 1 18
SRWOMD36144 Rolls Medium Dimpled 36" X 144' (91 cm x 43 m) 1 18
SRWOMDS18144 Rolls Medium Dimpled Split 18" X 144' (46 cm x 43 m) 2 18
MB GRAY UNIVERSAL SORBENT ROLLS
ITEM # TYPE FORMAT SIZE UNIT/CASE QTY/PALLET
SRGUH36144 Rolls Heavy Dimpled 36" X 144' (91 cm x 43 m) 1 18
SRGUHDS18144 Rolls Heavy Dimpled Split 18" X 144' (46 cm x 43 m) 2 18
SRGUMD36144 Rolls Medium Dimpled 36" X 144' (91 cm x 43 m) 1 18
SRGUMDS18144 Rolls Medium Dimpled Split 18" X 144' (46 cm x 43 m) 2 18
MB YELLOW HAZMAT SORBENT ROLLS
ITEM # TYPE FORMAT SIZE UNIT/CASE QTY/PALLET
SRYHH36144 Rolls Heavy Dimpled 36" X 144' (91 cm x 43 m) 1/Bale 18
Sorbent Pads
Sorbent Rolls
MB WHITE OIL ONLY SORBENT BOOMS
ITEM # TYPE SIZE UNIT/CASE QTY/PALLET SB510WO Booms 5" X 10' (13 cm x 3 m) 4 24 SB810WO Booms 8" X 10' (20 cm x 6 m) 4 16
MB WHITE OIL ONLY SORBENT SOCKS
ITEM # TYPE SIZE UNIT/CASE QTY/PALLET SS34WO40 Socks 3" X 4' (8 cm x 1 m) 40 18 SS396WO20 Socks 3" X 96" (8 cm x 2 m) 20 18 SS3120WO15 Socks 3" X 120" (8 cm x 3 m) 15 18
MB WHITE OIL ONLY SORBENT PIL-LOWS
ITEM # TYPE SIZE UNIT/CASE QTY/PALLET SPIL1010WO Pillows 10" X 10" X 2" (25 cm x 25 cm x 5 cm) 40 18 SPIL918WO Pillows 9" X 18" X 2" (23 cm x 46 cm x 5 cm) 20 18 SPIL1818WO Pillows 18" X 18" X 2" (46 cm x 46 cm x 5 cm) 10 18
MB WHITE OIL ONLY SORBENT BILGE BOOM
ITEM # TYPE SIZE UNIT/CASE QTY/PALLET SBB518 Bilge Boom 5" x 18" (13 cm x 46 cm) 4 24 SBB818 Bilge Boom 8" X 18" (20 cm x 46 cm) 4 16
MB WHITE OIL ONLY SORBENT SWEEP
ITEM # TYPE SIZE UNIT/CASE QTY/PALLET SSW18100 Sweep 18" X 100' (46 cm x 30 m) 1 40
MB WHITE OIL ONLY SORBENT DRUM TOPPERS
ITEM # TYPE SIZE UNIT/CASE QTY/PALLET SD24WO Drum Toppers 24" (61 cm) Diameter 25/Box 80
Oil Only
Sorbent Booms, Socks, Pillows, Sweeps, Drum Toppers
MB GRAY UNIVERSAL SORBENT BOOMS ITEM # TYPE SIZE UNIT/CASE QTY/PALLET SB510GU Booms 5" X 10' (13 cm x 3 m) 4 24 SB810GU Booms 8" X 10' (20 cm x 6 m) 4 16
MB GRAY UNIVERSAL SORBENT SOCKS ITEM # TYPE SIZE UNIT/CASE QTY/PALLET SS34GU40 Socks 3" X 4' (8 cm x 1 m) 40 18 SS396GU20 Socks 3" X 96" (8 cm x 2 m) 20 18 SS3120GU15 Socks 3" X 120" (8 cm x 3 m) 15 18
MB GRAY UNIVERSAL SORBENT PILLOWS ITEM # TYPE SIZE UNIT/CASE QTY/PALLET SPIL918GU Pillows 9" X 18" X 2" (23 cm x 46 cm x 5 cm) 20 18 SPIL1818GU Pillows 18" X 18" X 2" (46 cm x 46 cm x 5 cm) 10 18
MB GRAY UNIVERSAL SORBENT DRUM TOPPERS ITEM # TYPE SIZE UNIT/CASE QTY/PALLET SD24GU Drum Toppers 24" (61 cm) Diameter 25 80
MB YELLOW HAZMAT SORBENT SOCKS
ITEM # TYPE SIZE UNIT/CASE QTY/PALLET SS34YH40 Socks 3" X 4' (8 cm x 1 m) 40/Box 18 SS396YH20 Socks 3" X 96" (8 cm x 2 m) 20/Box 18 SS3120YH15 Socks 3" X 120" (8 cm x 3 m) 15/Box 18
MB YELLOW HAZMAT SORBENT PILLOWS
ITEM # TYPE SIZE UNIT/CASE QTY/PALLET SPIL918YH Pillows 9" X 18" X 2" (23 cm x 46 cm x 5 cm) 20/Box 18 SPIL1818YH Pillows 18" X 18" X 2" (46 cm x 46 cm x 5 cm) 10/Box 18
Universal
Sorbent Booms, Socks, Pillows, Sweeps, Drum Toppers
Hazmat
Sorbent Booms, Socks, Pillows, Sweeps, Drum Toppers
Oil-Dri® Granular Clay absorbents are available in the tra-ditional coarse formula and the finer QuickSorb™ grind. Both are produced from the same high-quality absorbent minerals and are effective on oils, coolants, grease, water, and other liquid spills.
SpillCon’ Oil Spill Carts include a variety of sorbents to handle oil spills and other petroleum-based fluids while repelling water—an all inclusive solution for quick response! Wheeled containers move quickly to a spill site and fit easily through doorways and aisles. Our Oil Spill Carts can also be moved with a forklift and are lockable to protect contents.
Solidifier Oil Solidifiers are composed of dry, high molecu-lar weight polymers that have a porous matrix and large oleophilic (strong affinity for oil rather than water) surface area. Once in contact with oil, the oil solidifies to form a physical bond with the oil.
Spill Kits Matching Requirements
Loose Granular
Isolite for Soil Remediation
Isolite™ is a unique porous ceramic pellet used as a bio-carrier for microbes. It serves to remediate contaminated soil/groundwater when injected into man-made subsur-face fractures.
DRUMS • CARTS • TRAILERS
Oil Spill Kits designed to respond to OPA 90 and IMO/MARPOL 73/78 regulations.
With these kits on board you are assured of fulfilling any safety and environmental regulation applicable globally.
There are several regulations circulating and in short they are:
Oil Pollution Act of 1990 (33 CFR Part 155) or OPA90 requires oil carrying vessels in U.S. waters to have oil spill clean up equipment on board for on-deck spills.
Vessels with an overall length of 400 feet or less are required to be able to contain and remove on-deck spills of at least 7 barrels (294 gallons; 1,100 litres).
Oil tankers and barges with an overall length of 400 feet or more have an increased requirement of being able to clean up spills of 12 barrels (504 gallons; 1,900 litres).
Vessels carrying oil as secondary cargo must have a spill kit on board to contain and remove on-deck spills of at least 1.5 barrels ( = 63 Gallons = 238 Liters).
According to several IMO resolutions "all ships should have the capability to contain and clean up minor deck and over side spills".
Regulation 26 of Annex I of MARPOL 73/78 requires that oil tankers of 150 tons gross tonnage or more and all ships of 400 tons gross tonnage or more carry an approved Shipboard Oil Pollution Plan (SOPEP).
The International Convention on Oil Pollution Preparedness, Response and Co-operation, 1990, also requires such a plan for certain ships. These plans all includes an Oil Spill Response Kits on board.
SpillCon Solutions offers the most comprehensive range of Oil Spill Response Kits available in the market. As the needs can be very different we offer our kits in different features and sizes.
In July 2002, the U.S. Environmental Protection Agency amended the Oil Pollution Prevention regulation at Title 40 of the Code of Federal Regulations, Part 112, (40 CFR 112).
Subparts A through C of the Oil Pollution Prevention regulation are often referred to as the “SPCC Rule” because they describe the requirements for certain facilities to prepare, amend and implement Spill Prevention, Control and Counter-measure (SPCC) Plans.
SPCC Plans are a cornerstone of EPA’s strategy to prevent oil spills from reaching our nation’s waters, and they ensure that facilities put in place containment and other countermeasures that would prevent oil spills that could reach navigable waters.
Under EPA’s Oil Pollution Prevention regulation, facilities must detail and implement spill prevention and control meas-ures in their SPCC Plans.
Spill Kits
Marine Oil Spill Kits
Background of SPCC Spill Response Kit
Marine Oil Spill Kits
Designed to meet the SPCC requirements of 326 Gallon Pick up (1234 Liters). Up to 2600 lbs pick up (1,182 kg).
Description 12 Barrel 7 Barrel 1.5 Barrel
ART Number SCO-12 SCO-07 SCO-01
Content / Spill Kit
Plastic Cart, Lid, Casters 1 1 1
Oil Only Sorbent Pads, HW, 15" X 18" (38 cm x 46 cm) 200 200 0
Oil Only Sorbent Pads, MW, 15" X 18" (38 cm x 46 cm) 600 400 200
Oil Only Sorbent Socks, 3" X 4' (8 cm x 1 m) 40 20 4
Oil Only Sorbent Socks, 3" X 96" (8 cm x 2 m) 22 8 0
Oil Only Sorbent Booms, 5" X 10' (13 cm x 3 m) 8 4 2
Oil Only Sorbent Pillows, 18" X 18" X 2" (46 cm x 46 cm x 5 cm) 20 10 3
Oil Only Sorbent Roll, HW, 36" X 144' (91 cm x 43 m) 2 1 0
Oil Only Sorbent Sweep 18" X 100' (46 cm x 30 m) 1 1 0
Protective Gloves 2 2 2
Protective Goggles 2 2 2
Tyvek Suits 2 2 2
Heavy Duty Waste Bags 10 5 1
Big Bag (for waste) 1 1 1
Shovel (Non Sparking) 1 1 1
Plastic Bucket 1 1 1
We manufacture our absorbents and build our Spill kits onsite, we can custom-design a kit just for you.
Qty Description 5 gallon Spill Kit Pail Size 10 White Oil-Only Heavy Weight Pads 15” x 19"
2 White Oil-Only Sorbent Socks 3" x 4' 1 Disposal Bags 30”x 6” x 60” 1 Nitrile Gloves One Size 1 Safety Goggles One Size 1 White 5 Gallon UN Pail
Qty Description 30 gallon Spill Kit Size 25 White Oil-Only HeavyWeight Pads 15” x 19" 4 White Oil-Only Sorbent Socks 3" x 8' 4 White Oil-Only Sorbent Pillows 18" x 18" 1 Emergency Response GuideBook One Size 3 Disposal Bags 30”x 6” x 60” 1 Pair Nitrile Gloves One Size 1 Pair Safety Goggles One Size 1 Vinyl Spill Kit Label 3” x 5” 1 30 Gallon UN Poly Drum
Qty Description 50 gallon Spill Kit Size 100 White Oil-Only HeavyWeight Pads 15” x 19”
6 White Oil-Only Sorbent Socks 3" x 4' 4 White Oil-Only Sorbent Pillows 18" x 18" 1 Emergency Response GuideBook One Size 3 Disposal Bags 30”x 6” x 60” 2 Pair Nitrile Gloves One Size 1 Pair Safety Goggles One Size 1 55 gallon UN Poly Drum
Qty Description 95 gallon Spill Kit Size 150 White Oil-Only HeavyWeight Pads 15” x 19”
12 White Oil-Only Sorbent Socks 3" x 4' 6 White Oil-Only Sorbent Socks 3" x 8' 7 White Oil-Only Sorbent Pillows 18" x 18" 4 Disposal Bags 30”x 6” x 60” 1 Emergency Response GuideBook One Size 2 Pair Nitrile Gloves One Size 1 Pair Safety Goggles One Size 1 Yellow 95 gallon OverPack
Spill Response Kits
Qty Description 5 gallon Spill Kit Bag Size 10 White Heavy Weight Pads 15” x 19"
2 White Sorbent Socks 3" x 4' 1 Disposal Bags 30”x 6” x 60” 1 Nitrile Gloves One Size 1 Hi Viz Yellow Bag Zippered
Photomicrograph of a Sphag Sorb particle's natural capillary and porous structure (2,750x actual size)
Sphagnum peat moss, the only ingredient in all natural Sphag Sorb
Sphag Sorb
Most effective cleanup solution to cleanup problems
TECHNICAL:
1 cubic ft absorbs 5-7 gallons of product
Meets EPA standards for disposal in landfills
Sphag Sorb will not leach: it passes TCLP at ratios much lower than competing absorbents.
High BTU value for incineration
Lower volume of Sphag Sorb required means lower disposal costs
Reduces flammable vapors by 90%
COMPARISONS:
Lower moisture, higher quality makes Sphag Sorb superior to other absorbents
Compared with clay, Sphag Sorb is: 10 times more absorbent Works on land or water One product, multi application Contains no silica Safe, non-toxic, non-leaching Lightweight, low transportation cost Vapor suppressive Suited for land fill and incineration
SorbaSolv™ is a patented recycled cellulose based oil absorbent that has an extremely high absorbency combined
with permanent water repellency and oil retention. Effective on water and land, SorbaSolv absorbs oil, greases and
other water insoluble organics and contains no toxic, carcinogenic or biologically hazardous materials.
Base recycled materials as a low cost alternative to virgin polypropylene materials.
A patented (US # 4,780,518) recycled cellulose based oil absorbent.
Contains no toxic, carcinogenic or biologically hazardous materials.
Absorbs oil, greases and other water insoluble organics into a thick mass decreasing its mobility manifold.
Oil Herder. SorbaSolv™ can be air deployed or sprayed on the spill by boat, to form a biomass that will allow bioremediation or, more importantly, the collection for processing to reclaim the oil into a usable product or for incorporation in a waste to energy burning unit
Water Remediation / Oil Spill Clean Up
SorbaSolv booms, pads, and loose particulate are highly effective against large or small oil spills in salt or fresh water.
The oil is first contained, absorbed, and recovered using various collection methods. Then, by simply applying pressure
and/or compression to the sorbent, the oil is released allowing it to be recycled.
Land Remediation
An effective method of site clean up is soil washing. This process separates oil from sandy, high humic and high clay con-
tent soil, reducing its leaching potential ten to twenty fold by incorporating SorbaSolv into the process. Batch mixing with
agitation and column elution are the two most effective methods to completely remove and eventually dispose of the pol-
lutant. SorbaSolv is ideal for beach /sand remediation
As a Filter Substrate
By relying on a phase separation process, SorbaSolv will absorb non-water soluble organics from aqueous liquid and va-
por mixtures. For years, SorbaSolv has been used as a filter substrate for the removal of oils, solvents, and other water
insoluble organics from aqueous waster streams in support of the Clean Water Act.
SORBASOLV
This method is applied to the diatomaceous earth products con-taining a large quantity of fossil shells with pores. Firebricks or grains of the diatomaceous earth are fired at high temperature for water and oil absorbency, water retentivity, moisture control-lability, and thermal insulation efficiency. The porous grains also work as a carrier for microbes and catalytic agents.
Isolite™, a special porous ceramic pellet that is used as the preferred and very effective biocar-rier for microbes and serves as the proppant for the fractures.
The Isolite™ is inoculated with microbes and/or nutrients as it is pushed through the mixer by the hydraulic auger system with control of both vol-ume and pressure
ISOLITE
Porosity Control Technology
Remediation
Isolite™ is a unique porous ceramic pellet used as a biocarrier for microbes. It serves to remediate contaminated soil/groundwater when injected into man-made subsurface fractures.
Features Isolite CG is a uniform grains of diatomaceous earth calcined at high temperature exceeding 1000℃. The porous grains have superior permeability, retain the air, water and nutrients, help cultivate bacteria, and improve over all physical conditions of the soil, for healthy growth of plants and turfs.
Kinds CG-1, CG-2
Applications 1. City parks, golf courses and greens, athletic fields 2. Landscaping soil 3. Foundation of roof-top gardens 4. Farming soil 5. Home gardening
Super Duty (Isolite) CG1 is made up from ceramic diatomaceous granules which have been pre-fired to around 1000ºC. The hardened granules incorporate a structure, which have extremely small cavities.. The result is a product that not only absorbs and retains a massive amount of water, but also releases the water in a controlled manner as and when the ground needs it!
Sample Isolite CG Similar Product
Bulk Density (g/cc) 0.55 0.83
Permeability (mm/hr) 31680 6840
Total Available Water (I/cubic m) 260 27
Total Available Water Ratio (%) 74.3 24.5
Total Porosity (%) 78.3 57.0
pH 6.72 6.91
Sample Permeability
(mm/hr)
Total Available Water
(1/cubic m)
Total Porosity
(%)
Sand 2664 12 47.0
10% ISOLITE CG 3960 40 50.9
20% ISOLITE CG 8640 64 55.4
10% SIMILAR PRODUCT 5760 12 50.3
20% SIMILAR PRODUCT 6120 15 53.9
Sample Total
Intrusion Vol.(cc/g)
Total Porosity
(%)
Total Surface
Area (m2/g)
Bulk Density (g/cc)
ISOLITE CG 0.5814 60.18 20.42 0.965
SIMILAR PRODUCT 0.3566 40.16 37.92 1.126
Sample Total
Intrusion Vol.(cc/g)
Total Porosity
(%)
Total Surface
Area (m2/g)
Bulk Density (g/cc)
ISOLITE CG 0.5814 60.18 20.42 0.965
SIMILAR PRODUCT 0.3566 40.16 37.92 1.126
Sample Permeability
(mm/hr)
Total Available Water
(1/cubic m)
Total Porosity
(%)
Sand 2664 12 47.0
10% ISOLITE CG 3960 40 50.9
20% ISOLITE CG 8640 64 55.4
10% SIMILAR PRODUCT 5760 12 50.3
20% SIMILAR PRODUCT 6120 15 53.9
Sample Isolite CG Similar Product
Bulk Density (g/cc) 0.55 0.83
Permeability (mm/hr) 31680 6840
Total Available Water (I/cubic m) 260 27
Total Available Water Ratio (%) 74.3 24.5
Total Porosity (%) 78.3 57.0
pH 6.72 6.91
Micro Photography
Close-up imagery of the Isolite product.
Diatomaceous Cell
Diatomaceous Cell under magnification
ISOLITE
More Green With Less Water
Spill Pallet containment for IBCs and Drums are economical and portable. A low profile allows safe and convenient tank han-dling and dispensing.
SpillCon’s Hard Top Hazardous Drum Containment Units have a 75 gallon capacity and drain. A Polyethylene Loading Ramp is also available.
Containment Berms stop spills at the source. Collapsible wall model containment berm fea-tures rugged PVC sidewall as-semblies for sidewall support.
Snap-up support provides a sturdy side wall for excellent spill containment. The interior design boasts 100% usable space and meets U.S. regula-
Flexible Containers
Pillow and Onion Tanks are heavy-duty military/industrial type flexible fabric tanks. Col-lapsible and portable, they meet U.S. Federal Containment Regulations and are designed to accommodate potable and non-potable water. Custom sizes and valve assemblies available.
Secondary Containment
Snap‐up support provides a sturdy side wall for excellent spill containment
100% usable interior space
30 oz fabric is compatible for water, all hydrocarbons and most chemicals
Meets EPA regulations for spill containment
Grommets every 6’ in skirt allows Berm to be secured in place
Simple cleaning and storage allows for repeated use
Width Length
8"/ Gal-lons
8"/Out Dims 12"/ Gal-lons
12"/Out Dims
10' 10' 493 11'-4" X 11'-4"
748 12' X 12'
10' 20' 987 11'-4" X 21'-4"
1496 12' X 22'
12' 36' 2132 13'-4" X 37'-4"
3231 14' X 38'
14' 54' 3732 15'-4" X 55'-4"
8886 16' X 56'
SNAP UP BERM
US Metric
Base Fabric Type Polyester
Base Fabric Weight (nominal) 8 oz/yd2 270 g/m2
Thickness 36 mils min 0.91 mm
Weight 30.0+_ 2 oz/yd2 1020+_ 70 g/m2
Tear Strength, Tongue D751B 120/120 lb min 534/534 N min
Breaking Yield Strength ASTM D 751, Grab Tensile, Procedure 625/600 lb min 2780/2670 N min
Low Temperature ASTM D 2136, Pass @ -40 F Pass @ -40 C
Dimensional Stability ASTM D 1204, 212 F- 1 hr 2.5% max each direction
Adhesion - Heat Sealed Seam ASTM D 751, Dielectric Weld 25 lb/2 in min 111 N/5 cm min
Bursting Strength ASTM D 751, Ball Tip 1000 lb min 4450 N
Hydrostatic Resistance ASTM D 751, Method A 800 psi min 540 N/sq cm min
Blocking Resistance ASTM D 751, 180 F/82 C # 2 Rating max
UV Resistance 8000 hrs
220 lb min 1110 N min Puncture Resistance ASTM D 4833
Durable foam logs allow vehicles to drive over them
Foam logs are covered with a fuel resistant polyethylene
Easily drains through 3/4” drains
30 oz fabric is compatible for all hydrocarbons and most chemicals
Easy cleaning and storage allows for repeated use
Includes a patch kit and 20 extra zip ties
Available in Black, OD Green, Desert Tan and Blue
Width Length 2"/ Gallons 2"/Outside Dims 4"/ Gallons 4"/Outside Dims
10' 10' 150 10'-4" X 10'-4" 246 10'-8" X 10'-8"
10' 20' 239 10'-4" X 20'-4" 493 10'-8" X 20'-8"
12' 36' 517 12'-4" X 36'-4" 1066 14'-8" X 36'-8"
14' 54' 904 14'-4" X 54'-4" 1866 14'-8" X 54'-8"
FOAM BERM
Base Fabric Type Polyester
Base Fabric Weight (nominal) 8 oz/yd2 270 g/m2
Thickness 36 mils min 0.91 mm
Weight 30.0+_ 2 oz/yd2 1020+_ 70 g/m2
Tear Strength, Tongue D751B 120/120 lb min 534/534 N min
Breaking Yield Strength ASTM D 751, Grab Tensile, Procedure 625/600 lb min 2780/2670 N min
Low Temperature ASTM D 2136, Pass @ -40 F Pass @ -40 C
Dimensional Stability ASTM D 1204, 212 F- 1 hr 2.5% max each direction
Adhesion - Heat Sealed Seam ASTM D 751, Dielectric Weld 25 lb/2 in min 111 N/5 cm min
Bursting Strength ASTM D 751, Ball Tip 1000 lb min 4450 N
Hydrostatic Resistance ASTM D 751, Method A 800 psi min 540 N/sq cm min
Blocking Resistance ASTM D 751, 180 F/82 C # 2 Rating max
UV Resistance 8000 hrs
Puncture Resistance ASTM D 4833 220 lb min 1110 N min
Takes only minutes to set-up; fast and easy deployment
Innovative design allows driver to enter/exit without leaving the vehicle
Heavy-duty 30 oz fabric is compatible for water, all hydrocarbons and most chemicals
In the event of a spill, walls automatically rise
Meets EPA regulations for spill containment
Compact design takes very little space to store
Easy cleaning and storage allows for repeated use
All Flexwall Berms have patch kit included
Available in Black, OD Green, Desert Tan and Blue
FLEXWALL BERM
Base Fabric Type Polyester
Base Fabric Weight (nominal) 8 oz/yd2 270 g/m2
Thickness 36 mils min 0.91 mm
Weight 30.0+_ 2 oz/yd2 1020+_ 70 g/m2
Tear Strength, Tongue D751B 120/120 lb min 534/534 N min
Breaking Yield Strength ASTM D 751, Grab Tensile, Procedure 625/600 lb min 2780/2670 N min
Low Temperature ASTM D 2136, Pass @ -40 F Pass @ -40 C
Dimensional Stability ASTM D 1204, 212 F- 1 hr 2.5% max each direction
Adhesion - Heat Sealed Seam ASTM D 751, Dielectric Weld 25 lb/2 in min 111 N/5 cm min
Bursting Strength ASTM D 751, Ball Tip 1000 lb min 4450 N
Hydrostatic Resistance ASTM D 751, Method A 800 psi min 540 N/sq cm min
Blocking Resistance ASTM D 751, 180 F/82 C # 2 Rating max
UV Resistance 8000 hrs
Puncture Resistance ASTM D 4833 220 lb min 1110 N min
No set up required
Durable 3” foam logs allow to drive into from any angle
30 oz fabric is compatible for water and hydrocarbons
Simple to clean and store for repeated use
Meets EPA regulations for spill containment
All Spill Pans come equip with a patch kit
Shortest lead-times in the industry
Available in Black, OD Green, Desert Tan and Blue
Custom sizes are available upon request
FLEXIBLE SPILLPAN
Width Length 3"/ Gallons 3"/Outside Dims
10' 10' 187 10'-6" X 10'-6"
10' 20' 374 10'-6" X 20'-6"
12' 36' 807 12'-6" X 36'-6"
14' 54' 1413 14'-6" X 54'-6"
Base Fabric Type Polyester
US Metric
Base Fabric Weight (nominal) 8 oz/yd2 270 g/m2
Thickness 36 mils min 0.91 mm
Weight 30.0+_ 2 oz/yd2 1020+_ 70 g/m2
Tear Strength, Tongue D751B 120/120 lb min 534/534 N min
Breaking Yield Strength ASTM D 751, Grab Tensile, Procedure 625/600 lb min 2780/2670 N min
Low Temperature ASTM D 2136, Pass @ -40 F Pass @ -40 C
Dimensional Stability ASTM D 1204, 212 F- 1 hr 2.5% max each direction
Adhesion - Heat Sealed Seam ASTM D 751, Dielectric Weld 25 lb/2 in min 111 N/5 cm min
Bursting Strength ASTM D 751, Ball Tip 1000 lb min 4450 N
Hydrostatic Resistance ASTM D 751, Method A 800 psi min 540 N/sq cm min
Blocking Resistance ASTM D 751, 180 F/82 C # 2 Rating max
UV Resistance 8000 hrs
Puncture Resistance ASTM D 4833 220 lb min 1110 N min
No assembly required
Walls lay flat when not in use
Fastest deployment in the industry for portable spill containment sys-tems
Can be driven on at any angle
2' wall availability permits smaller footprint
In the event of a spill, walls automatically rise to create a catch basin
Optional built-in track mats help prevent damage to the berm
Berm contains no working parts which would malfunction
Meets EPA regulations for spill containment
30 Oz fabric is appropriate for hydrocarbons, and most chemicals
Easily emptied through 3/4" drains
Available in Desert Tan; OD Green; and Black
THROW ’N GO
Base Fabric Type Polyester
Base Fabric Weight (nominal) 8 oz/yd2 270 g/m2
Thickness 36 mils min 0.91 mm
Weight 30.0+_ 2 oz/yd2 1020+_ 70 g/m2
Tear Strength, Tongue D751B 120/120 lb min 534/534 N min
Breaking Yield Strength ASTM D 751, Grab Tensile, Procedure 625/600 lb min 2780/2670 N min
Low Temperature ASTM D 2136, Pass @ -40 F Pass @ -40 C
Dimensional Stability ASTM D 1204, 212 F- 1 hr 2.5% max each direction
Adhesion - Heat Sealed Seam ASTM D 751, Dielectric Weld 25 lb/2 in min 111 N/5 cm min
Bursting Strength ASTM D 751, Ball Tip 1000 lb min 4450 N
Hydrostatic Resistance ASTM D 751, Method A 800 psi min 540 N/sq cm min
Blocking Resistance ASTM D 751, 180 F/82 C # 2 Rating max
UV Resistance 8000 hrs
Puncture Resistance ASTM D 4833 220 lb min 1110 N min
TrackMats
TrackMat widely used by transportation companies, utilities, refineries, steel mills, and in other environments in which a high absorbency barrier is required.
Capture Hazardous Spills from Railroad Tanker Cars and Locomotives
RAIL MATS PART # DESCRIPTION UNIT/CASE QTY/PALLET
SRM59100 Black Oil-Only Highly Absorbent Rail Mats, 59" x 100' 1 18 SRM19100 Black Oil-Only Highly Absorbent Rail Mats, 19" x 100' 2 18
NEEDLE PUNCH INDUSTRIAL RUGS
PART # DESCRIPTION UNIT/CASE QTY/PALLET SIR36150 36" x 150' Poly Backed, Needle Punch Synthetic Fiber 1 20 SIR36300 36" X 300' Needle Punch, Light Weight Synthetic Fiber 1 20
Big Savings for Full Pallet Orders!
Rail Road Track oil absorbent mats are ideal for use as railroad track mats when refueling locomotives or greasing rails or as at station sites.
TrackPans
TrackPans have been designed to provide spill containment at indus-trial rail sidings, locomotive maintenance and fueling facilities. Available in virtually any length, TrackPans may be used to collect small spills and leaks or to capture and channel off significant spills caused by defective equipment or a major overflow.
Low Maintenance - Unlike carbon steel track pans, TrackPans will not rust or corrode, Polyethylene resin is treated with a UV inhibitor, resists degrading effects of the sun,
Low Cost Installation - Lightweight TrackPans can be easily installed without heavy lifting equipment, i.e., forklifts, cranes, backhoes, etc. Minimal tools and labor required.
Slip Resistant Surfaces - Pans, grates and covers have been designed with safety in mind. All top surfaces resist slips when wet or oily.
Long Work Life - Estimated to perform for 20-30 years; longer than fi-berglass pans.
TRACK PANS
PART # DESCRIPTION UNIT/CASE SCTP9566 53 1/2" X 53 1/2" X 6" Center TrackPan with Grates Each
SCTP9580 56" x 54" Cover for Center TrackPan Each
SCTP9576 53 1/2" x 27 1/2" x 6" Side TrackPan with Grates Each
SCTP9581 56" x 27 3/4" Cover for Side TrackPan Each
.
Meets SPCC and EPA Stormwater Management Regulations.
Capture Hazardous Spills from Railroad Tanker Cars and Locomotives
Heavy duty military/industrial style fabric tanks
Collapsible and Portable with custom sizes available
Designed to accommodate potable and non-potable water & fuel
Custom valve assemblies available
Fast and easy deployment
Standard color—Desert Tan , other colors available upon request
Part # Gallon
Capacity
Flat
Dimensions
Fill
Height
Color
PT100-T 100 gal 5’x50” 11” Desert Tan
PT500-T 500 gal 8’x7’4” 20” Desert Tan
PT1000-T 1,000 gal 9’7”x9’7” 26” Desert Tan
PT3000-T 3,000 gal 13’9”x13’9 38” Desert Tan
PT5000-T 5,000 gal 16’8”x16’ 44” Desert Tan
PT10000-T 10,000 gal 21’3”x20’ 55” Desert Tan
PT20000-T 20,000 gal 27’3”x27’ 60” Desert Tan
PILLOW TANKS
No set up required
Use for small engine leaks
A 6-pound weighted base keeps the berm in place
Optional disposal absorbent pads make for easy clean up and repeated use
Meets U.S. regulations for spill containment
Available in Yellow, OD Green, Desert Tan, and Black
Part Number Length Width Weight
ENDP1919 22” 22” 6 lbs
DRIP PILLOW
Roll Top Onion Open Top Onion Tank Zipper Top Onion Tank
Suitable for potable and non-potable water storage
Stable on any slope up to 10%
Ground cloth acts as a carrying bag
Self-supporting
Quick set-up and take down
2” male and female cam-lock fittings
Lid reduces contamination and evaporation
Color and additional sizes available upon request
Capacity NSN#
1,000 gal —
1,500 gal 5430-01-527-0341
3,000 gal 5430-01-540-5357
5,000 gal —
Capacity NSN#
1,000 gal 5430-01-526-2212
1,500 gal —
3,000 gal —
5,000 gal —
Capacity NSN#
1,000 gal —
1,5000 gal —
3,000 gal 5430-01-542-5905
5,000 gal —
ONION TANKS
SpillCon’s Response & Deployment products are cutting edge technology insuring Rapid contain-ment of oil spills.
Response & Deployment
Safety Products
A comprehensive assemblage of safety products complements SpillCon’s high-quality Spill Con-trol and Containment products.
STORMWATER MANAGEMENT
Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements.
The Drain Guard is installed in a catch basin and is held in place by the drain’s grate.
Stormwater runoff enters the Drain Guard and is directed toward the pouch by a skirt made of a non-woven polypropylene, needle-punched, geotextile material. This fabric filters the pollutants from the water stream as it passes over and flows through the material.
Additionally, each Drain Guard is equipped with numerous "Filter Strips" made of "X-TEX", a unique filter material made of recycled synthetic fibers. X-TEX is extremely effective in capturing and remov-ing hydrocarbons and other pollutants from stormwater.
Oil & Sediment Model: 48" x 36" Oil & Sediment Plus Model: 48" x 36"
Dimension :
Part# 9217: 48"L x 36"W x 18"H (1-Pack)(1220 mm x 915 mm x 458 mm) Part# 9218: 48"L x 36"W x 18"H (10-Pack)
Dimension :
Part# 9219: 48"L x 36"W x 18"H (1-Pack)(1220 mm x 915 mm x 458 mm) Part# 9220: 48"L x 36"W x 18"H (10-Pack)
Performance :
Oil: Up to .87 gallons (3.5 L)
Sediment: Up to 40 lbs. (18 kg)
Performance :
Oil: Up to 1.38 gallons (5 L)
Sediment: Up to 40 lbs. (18 kg)
The total water flow rate through the insert in new condition is in excess of 500 gpm. The bypass rate is approxi-
mately 700 gpm.
Oil & Sediment Model: 60" x 60" Oil & Sediment Plus Model: 60" x 60"
Dimension :
Part# 9356: 60"L x 60"W x 18"H (1-Pack)(1524 mm x 1524 mm x 458 mm)
Dimension :
Part# 9358: 60"L x 60"W x 18"H (1-Pack)(1524 mm x 1524 mm x 458 mm)
Weight: 2 lbs. (1 kg) Weight: 3 lbs. (1.5 kg)
Performance :
Oil: Up to 1.55 gallons (5.9 L)
Sediment: Up to 40 lbs. (18 kg)
Performance :
Oil: Up to 2.06 gallons (7.8 L)
Sediment: Up to 40 lbs. (18 kg)
The total water flow rate through the insert in new condition is in excess of 900 gpm. The bypass rate is approxi-
mately 700 gpm.
Contain Sediment And Oil Pumped Out During Dewatering Operations.
Detains both oil and sediment,
Standard and custom sizes available.
Dewatering Bag
DEWATERING BAG®
Dimension Capacity
3' x 4' (915 mm x 1,220 mm) 6 cu ft (170 L)
6' x 6' (1,829 mm x 1,829 mm) 18 cu ft (510 L)
10' x 15' (3,048 mm x 4,572 mm) 150 cu ft (4,247 L)
15' x 15' (4,572 mm x 4,572 mm) 225 cu ft (6,371 L)
Dewatering Bag Reusable
DEWATERING BAG®
Description Dimensions ft (mm) Weight lbs. (kg)
Bag with Locking Rods 3 x 5 (915 x 1,524) 19.0 (9.0)
Bag with Locking Rods 5 x 7 (1,524 x 2,134) 21.0 (9.5)
Locking Rods only --- 13.0 (6.0)
Replacement Bag 3 x 5 (915 x 1,524) 4.0 (2.0)
Replacement Bag 5 x 7 (1,524 x 2,134) 6.0 (3.0)
PIPE SOCK ®
Dimensions Oil absorption capacity
60"L, fits 8" Dia. Pipe.(204 mm dia., 1,524 mm L) 0.81 Gallons
60"L, fits 12" Dia. Pipe305 mm dia., 1,524 mm L) 1.22 Gallons
60"L, fits 16" Dia. Pipe(407 mm dia., 1,524 mm
L)
1.63 Gallons
Pipe Sock
ROC BARRIER™ WORLD’S FASTEST RESPONSE OIL CONTAINMENT SYSTEM
Using innovative technology, the ROC BarrierTM is deployed at speeds of up to 54.7 kilometers (34 miles) per hour1, over five times faster than conventional oil containment booms.
The ROC BarrierTM is the only available oil containment system small enough to allow tank-ers, ships and other watercraft, as well as marinas, harbors, ports, shipping lanes, beaches, and other water entry points to store it on site so that it can be deployed quickly following an oil spill. The canister, which holds the film laminate used to contain an oil spill, measures just 20 inches in length, by eight inches in width, and eight inches in depth.
Products ROC Barrier 1000 System
ROC Barrier 2000 System
ROC Barrier XL1000 System
ROC Barrier Spill Cling Pad
Definite Deployment Advantage
Remote Optical Watcher - ROW is an autonomous non-contact sensor that detects oil on water in real time. It uses oil’s natural fluorescence to detect anything from marine diesel to vegetable oil to jet fuel, and alerts you immediately.
Highly accurate and easy to maintain, it finds oil spills early so you can respond before things get out of hand.
APPLICATION FIELDS
Harbors
Rivers
Channels
Coastal water
IDENTIFY
Fuel oil (IFO)
Marine diesel oil (MDO)
Gas oil
Crude oil
Motor oil
Turbine oil
Jet fuel
Heating oil
KEY FEATURES:
Detection: Any oils
Detection limit: 1μm
Field of view: 1 m2
Power consumption: <2W
Certification: IP68, CE, UL
ROW – Remote Oil Watcher
A barrel of oil can cause massive damage: just one liter contaminates up to 1 million liters of water.* * Source: Worldwide Analysis of Marine OilSpill-Cleanup Cost Factors: Dagmar Schmidt Etkin
OIL IN WATER MONITORING BUOY
Compact and rugged buoy system is designed for short term moni-
toring (up to 24 months). The lightweight and low-cost buoy is easily
handled by one person in the field, weighing just 25kg, and being
only 60cm in diameter and 2.0m in overall length.
Detection of hydrocarbons in the water column is performed by a
submersible sensor. Sensors are available for both crude oil and
refined fuels, and are protected from collision damage within the ro-
bust central structure.
The system itself is powered by two 5W solar panels, and is equipped with battery backup, navigation and warning
lights, and any other markings as necessary. A range of telemetry options are available (UHF/VHF, GSM, GPRS,
Satellite), selected to suit both the location and application requirements.
Applications:
• Refineries
• Ports/Harbors
• Marinas
• Offshore sites
• Outfall Monitoring
The OILSPILLWATCH™ unmanned aerial surveillance systems include three primary plat-
forms; the Aerostat (AS), Rotary Wing (RW), and Fixed Wing (FW) systems.
The AS system is a lighter than air aerial surveillance and communications system that quickly de-
ploys over environmental response areas to provide fast and effective communications and
surveillance. Tethered from a ground base, trailer, or sea vessel, the surveillance payload includes
EO/IR cameras for day or night operations in addition to a Mesh Communications Network.
The RW and FW aerial surveillance systems are fitted with mission specific EO/IR cameras for an
array of applications including security, surveillance, monitoring, response, and inspection. Each
platform can be custom configured to support a customer’s unique requirements.
™
Aerostat
Rotary Wing
Fixed Wing
Environmental ♦ Infrastructure ♦ Exploration
Security ♦ Industrial ♦ Utility
™
OSW-111213 © Copyright 2013. EST, Inc. All rights re-
A subs id ia ry o f EST
Corporate Offices
P: 603.382.8481
F : 603.378.0816
www.radsystemsinc.com
Aerial Monitoring and Communications Equipment
Mission Specific Platforms – Helikite, Aerostat , and UAS
Technology Specific Cameras for Environmental Protection
Responder Multi-Radio Kinetic Mesh Network Voice ad Data
The range of multiple corers are simple, reliable corers for collecting multiple samples of virtually undisturbed sedi-ment, including the sediment/water interface, and overlying supernatant water. A range of models is available to sam-ple up to 12 cores in a single deployment.
Used for soft sediment sampling in chemical, geochemical and biological applications.
Unique hydrostatic damping system slows the penetration rate to approx. 1 cm/s,
Undisturbed sediment sample with overlying supernatant water provides a unique insight into the sediment water interface.
Corer deployment rates: descent - approx. 1 m/s , penetration – approx. 1 cm/s, retrieval – winch speed
Samples are positively sealed, being capped both top and bottom, preserving the integrity of the samples.
The rugged frame of the corer is made of 316 stainless steel and marine grade brass.
The core tubing can be manufactured from acrylic, poly carbonate or stainless steel, depending on requirements.
Ideal for rapid assessment work.
THE ONLY CORER TO COLLECT AN UNDISTERBED SAMPLE
Spill Detection - Marine & Land
SpillCon’s Oil in Water Monitoring Buoy ensures real-time data collec-tion when an environmental condition requires monitoring. The buoy is de-signed to alert users when increased hydrocarbon levels occur, or when changes in water quality develop. A single point mooring allows for easy deployment and recover.
Best-in-class Corers collect multiple samples of virtually undisturbed sediment, including the sediment/water interface and overlying supernatant water. An innovative hydrostatic damping system is at the heart of the sys-tem that slows the penetration rate down to approximately 1cm/s, eliminat-ing the typical bow wave seen by other, less sophisticated corers.
Proud Supplier
Remote Optical Watcher - ROW is an autonomous non-contact sensor that detects oil on water in real time. It uses oil’s natural fluorescence to detect anything from marine diesel to vegetable oil to jet fuel, and alerts you immediately.
4 Wilder Drive, #7 Plaistow NH 03865 USA
www.enviroscitech.com +1 (603) 378-0809