Motors | Automation | Energy | Transmission & Distribution | Coatings

Motors, Energy, Automation

This is WEG

USA506 - 05/12

Productsg W22 Three-phase from 18.5 to 355 kW (European Market)g WMagnet Three-phase from 11 to 160 kWg WELL Three-phase from 0.75 to 370 kWg W21 Standard Efficiency Three-phase from 0.12 to 370 kWg W21 Top Premium Efficiency Three-phase from 0.12 to 370 kWg Roller Table - Three-phase Frames 132M, 160L, 180M, 200L and 225S/Mg Rolled Steel Three-phase from 0.75 to 15 kWg Mining Three-phase from 0.37 to 370 kWg Wash Three-phase from 0.75 to 37 kWg Multi Speed - Dahalnder Two Speed Independent Winding - Two or Three Speedg W21 Aluminum Three-phase from 0.12 to 15 kWg ODP Three-phase from 0.75 to 220 kWg Brake Motor Three-phase from 0.75 to 370 kWg Three-phase motors for Gearbox from 0.12 to 315 kWg Saw Arbor Three-phase from 2.2 to 7.5 kWg P-Base Three-phase from 0.75 to 110 kWg Smoke Extraction Three-phase from 0.12 to 315 kWg Compressor Duty Single-phase from 0.37 to 3.7 kWg Single-phase from 0.12 to 9.2 kWg Fuel Pump - Single-phase from 0.25 to 0.75 kW Three-phase from 0.37 to 0.75 kWg Fractional - Single-phase from 0.09 to 2.2 kW Three-phase from 0.18 to 2.2 kW g Fractional Jet Pump - Single-phase from 0.09 to 2.2 kW Three-phase - from 0.25 to 2.2 kWg Explosion Proof Three-phase from 0.37 to 370 kWg Explosion Proof with Brake Three-phase from 0.25 to 75 kWg Explosion Proof Medium Voltage from 160 to 900 kWg WDIP Motors for 21 Zone Three-phase from 0.12 to 315 kWg Non-Sparking (Ex n) Three-phase from 0.37 to 330 kWg Increased Safety (Ex e) Three-phase from 0.18 to 100 kW Appliance Motorsg HVACg Washing Machineg Air Conditioning

Motors

Products g Hydrogenerators - Outputs up to 25 MVA Voltages up to 13.800 kVg Turbogenerators - Outputs up to 62.5 MVA Voltages up to 13.800 kVg Synchronous Generators (GTA) Outputs from 12.5 to 4200 kVA Voltages from 220 to 13,800 Vg Low and High Voltage Induction Motors Outputs up to 50,000 kW Voltages from 220 to 13,800 Vg Synchronous Motors Outputs up to 50,000 kW Voltages from 220 to 13,800 Vg DC Motors - Outputs up to 10,000 kW Voltages from 110 to 800 Vdcg Power Transformers with rates up to 300 MVA and Voltages up to 550 kVg Furnace and Rectifier Transformers rates up

to 150 MVAg Dry Type Transformers from 300 to 15,000 kVAg Industrial Transformers from 500 to 5,000 kVAg Distribution Transformers from 15 to 300 kVAg Power Substations: Stationary and Mobile

Service g Repair and up-rate service for Power Transformers up to 300 MVA and voltages up to 550 kV at the factory or in the field.g Repair and up-rate service in Medium and Large size Electric Rotating Machines (Induction Motors, LV/HV Generators, DC Motors).

Energy

Automation

Products g Low Voltage VFDs from 0.18 to 1100 kWg MV Frequency Drives from 400 up to 3300 kWg Soft-Starters from 0.5 to 1950 kWg AC/DC Drives up to 884 kWg AC Servomotors (1.6 to 50Nm) and Servodrivesg LV Distribution Panelsg MV Distribution Panelsg IES - Integrated Electrical Systemsg Programmable Logic Controllersg Contactors and Thermal Overload Relaysg Motor Protective Circuit-Breakersg Moulded Case Circuit-Breakersg Miniature Circuit-Breakers & Residual Current

Circuit-Breakersg Air Circuit-Breakersg D and NH Fusesg Electronic Relaysg Enclosed Startersg Pushbuttons and Signallingg Power Factor Correction Capacitorsg Motor-run and Lighting Capacitors

Worldwide companies that have approved WEG

Any time | Any place

Steel Industry, Mining, Oil and Gas, Energy, Marine, Sugar and Alcohol, Pulp and Paper, Cement, Agriculture

Energy, Motors and Automation any time, any place. The complete solution that industry needs at the speed the market demands.

From small systems to large projects, WEG takes a proactive and detailed approach to solving problems while building open and honest relationships with customers.

Covering all market segments with factories, branches and technical service located around the world, WEG is present in one way or another in everyone’s day-to-day life.

Taking responsibility for the preservation of our planet and people, WEG continually invests in the technology necessary to develop more efficient and environmentally friendly electrical solutions.

Any time, any place. Your challenge is ours. This is WEG.

Worldwide companies that have approved WEG

Energy, Motors and Automation any time, any place. The complete solution that industry needs at the speed the market demands.

From small systems to large projects, WEG takes a proactive and detailed approach to solving problems while building open and honest relationships with customers.

Covering all market segments with factories, branches and technical service located around the world, WEG is present in one way or another in everyone’s day-to-day life.

Taking responsibility for the preservation of our planet and people, WEG continually invests in the technology necessary to develop more efficient and environmentally friendly electrical solutions.

Any time, any place. Your challenge is ours. This is WEG.

South America

gBrazil g Jaraguá do Sul (LV & HV Motors,

DC Motors, Generators, Drives, Control & Switchgear)g Guaramirím (Paints and Varnishes)g Blumenau (Transformers) g Guarulhos (Appliance Motors)g São Bernardo do Campo

(MV & HV Motors and Generators) g Manaus (Air-conditioning Motors)g Gravataí (Transformers) g Hortolandia (Transformers)g Joaçaba (Turbines) g Itajaí (Transformers and Panels)

gArgentina g Buenos Aires (Circuit Breakers) g Cordoba (Appliance Motors)g San Francisco (Electrical Panel Assem bly)

North America

gMexico g Huehuetoca (Explosion

Proof, Three-phase LV & HV Motors, Single-phase, Generators and Panels) g Tizayuca (Transformers)

Europe

gPortugal g Maia (LV & HV Standard and Explosion Proof Three-phase Motors)

Asia

gChina g Nantong (LV & HV Motors)

gIndia g Hosur (MV & HV Motors)

WEG around the world

Headquarters

Factories

Commercial Branches

WEG Electric Corp.6655 Sugarloaf ParkwayDuluth, GA 30097Phone: 1-800-ASK-4WEG web: www.weg.net

US

A50

6

Please contact your authorized distributor:

WEG Electric Corp. offers the following products, and more! With a full range of IEC/NEMA Global Certifications and a full line of products, WEG can supply the right solution for your needs anywhere in the world. To learn more about WEG’s products and solutions or to locate a Distributor near you, please call 1-800-ASK-4WEG or visit www.weg.net/us.

Low Voltage Motors,

Single and 3-Phase, 1/8 – 700HP

General Purpose Motors

Explosion Proof Motors

Crusher Duty Motors

IEC Tru-Metric Motors

Pump Motors including JP/JM

P-Base Pump Motors

Oil Well Pumping Motors

Pool & Spa Motors

Brake Motors

Compressor Duty Motors

Farm Duty Motors

Poultry Fan Motors

Auger Drive Motors

IEEE 841 Motors

Stainless Steel Wash Down Motors

Saw Arbor Motors

Cooling Tower Motors

Commercial HVAC Motors

Pad Mounted Motors

Vector Duty Motors

Large Electric Motors

Low Voltage 3-phase motors up to 2,500HP

Motors up to 70,000HP and 13,200V

Wound Rotor Systems (including starters) up to 70,000HP and 13,200V

Synchronous Motors up to 70,000HP and 13,200V

Explosion proof motors (Ex-d) up to 1,500kW and 11kV

Ex-n, Ex-e, Ex-p motors

Variable Frequency Drives

Low Voltage 1/4 to 2500HP, 230V – 480V

Medium Voltage 500-8000HP

Multi-pump systems

NEMA 4X

Dynamic braking resistors

Line and load reactors

Plug and play technology

Network communications: Profibus-DP, DeviceNet, Modbus-RTU

PLC functions integrated

Complete line of options and accessories

Soft Starters

3-1500HP

Oriented start-up

Built-in bypass contactor

Universal source voltage (230-575V, 50/60Hz)

Network communications: Profibus-DP, DeviceNet, Modbus-RTU

Complete Line of options and accessories

MV Soft-starter 3.3kV, 41.6kV: up to

3500HP, Withdrawable Power Stacks, & 8x PT100 Temperature monitoring

Controls

Mini – Contactors

IEC Contactors

Thermal Overload Relays

Manual Motor Protectors

Molded Case Circuit Breakers

Smart Relays

Enclosed Starters: combination & non-combination,

Pushbuttons & Pilot Lights

Timing & Motor Protection Relays

Terminal Blocks

Custom Panels

Custom configured to your specification.

NEMA 1, 12, 3R, 4 and 4X cabinets

Quick delivery of preconfigured drives

and soft starters

UL 508 certified

Low Voltage (230-460)

Made in the U.S.A.

Generators

Brushless Synchronous Generators for diesel gen-sets up to 4,200kVA

Hydro-generators up to 25,000kVA

Turbo-generators up to 62,500kVA

Power Transformers

Built and engineered in North America

Voltages < 500kV

Ratings 5-300MVA

Station class, oil filled, round core, copper windings

Special configurations and designs available!

Ask your WEG Sales Representative for details.

Designed, built, and engineered to ANSI standards.

Custom Solution Package Sales

WEG can package any of its products for ease of sale! Enjoy a single point of contact for the entire package of products and assistance from quote through after-sales support. Ask your WEG Sales Representative for details.