Date post: | 21-Apr-2015 |
Category: |
Documents |
Upload: | felipe-barufaldi-de-nadai |
View: | 214 times |
Download: | 15 times |
Shanghai Huaming Power Equipment Co., Ltd.
Operating InstructionsAutomatic Voltage Regulator ET-SZ6
Thank you for using our Automatic Voltage Regulator
Please make sure you will read this “Operation Instruction”
carefully before operating this regulator.
1
HMO.460.555
2
3
HMO.460.555
4
Shanghai Huaming Power Equipment Co.,Ltd.
D
5
HMO.460.555
6
7
HMO.460.555
8
9
HMO.460.555
“ ”Down key
“ ”Left key confirm “ ”Right key
“ ”Up key
“Confirm” key
10
The selected menu
Main menu
Project menuNote: Press “ ” key to select
the up options; Press key
to select the down options.
Setup project
Note:1. Set up numerical value parameter:
“ ” key: Select cyclically the
data bit
“ ” key: Add 1 to the selected
data bit.
2. Set up property parameter:
“ ”: Change the property value
“ ”key
Press “confirm” key
“ ”key
Press “confirm”
Key (save and return)
“ ”(not save and return)
11
HMO.460.555
12
13
HMO.460.555
98
210
Fastener
Controller
Control screen
14
15
HMO.460.555
16
17
HMO.460.555
18
19
HMO.460.555
7F00H Remote measure (YC) high byte address
7F01H Remote measure (YC) low byte address
7F02H Remote control (YK) high byte address
7F03H Remote control (YK) low byte address
Shanghai Huaming Power Equipment Co., Ltd.
Address: No. 977 Tongpu Road, Shanghai 200333, ChinaTel/Fax: (86) 21 - 5270 2715Web Site: www.huamig.comE-mail: [email protected] [email protected]
2006.9