EURASIAN ECONOMIC UNION
CERTIFICATE OF CONFORMITY
EAC No. EAEU RU С-DЕ.АЖЗ6.В.00023/19
Series RU No. 0139242
CERTIFICATION AUTHORITY "Product quality evaluation center" Limited Liability Company
Location: Office 102, Floor 1, 47, Volgogradskiy prospect, 109316 Moscow, RUSSIA
Address of place of business activity: 47, Volgogradskiy prospect, 109316 Moscow, RUSSIA
Registration number of accreditation certificate No. RA.RU. 11АЖ36, registration date 05.05.2017
Phone: +7 4956423508 Email: [email protected]
SUBMITTER "VIKA MERA" Joint Stock Company.
Location: Office 2.09, Floor 2, Building 1, Premise 1011 A, Nikolo-Khovanskoye Village, Sosenskoe Settlement, 142770
Moscow, Russia
Address of place of business activity: Building 1, Premise 1011 A, Nikolo-Khovanskoye Village, Sosenskoe Settlement,
108814 Moscow, Russia
Phone: +7 (495) 648-01-80, Email: [email protected]
MANUFACTURER "WIKA Alexander Wiegand SE & Со. KG".
Location and the address of the place of manufacturing: 30, Alexander-Wiegand-Str., 63911 Klingenberg, Germany
Manufacturing area (Subdivision): "KSR KUEBLER Niveau-Messtechnik GmbH", 1, Heinrich-Kuebler-Platz, 69439
Zwingenberg, Germany
PRODUCTS Elements of equipment operating under excessive pressure: externally mounted bridles for level gages,
BZG type:
- steel, maximum working pressure of 40 MPa (AD2000) and 25 MPa (ASME В31.3);
- made from titanium and nickel alloys, maximum working pressure 4 MPa (ASME B31.3) and 16 MPa (ASME B31.3), for
working media of groups 1 and 2 (liquids and gases), 3rd and 4th equipment category, as per Annex No. 1 ТR CU 032/2013.
The products are manufactured in accordance with AD2000 "Rules for design, manufacture, inspection and safe operation of
pressure vessels"; ASME B31.3 "Boiler and Pressure Vessel Code" of the American Society of Mechanical Engineers.
Process piping system. "Rules for pressure pipelines".
Serial production.
FEACN EAEU CODE 8481 90 000 0
MEETS REQUIREMENTS
Of the Customs Union technical regulation "On safety of equipment operating under excessive pressure" (TR CU 032/2013).
CERTIFICATE OF CONFORMITY IS ISSUED BASED ON the certification test protocols No. 206-19, 207-19
dated 05.12.2019 issued by the Testing Laboratory of the "International Industrial Academy" Non-State Educational
Institution of Continuing Professional Education, accreditation certificate ROSS RU.0001.21MP46
the production state analysis results act No. 31/TR CU/RA dated 08.11.2019
Documents submitted by the submitter as evidence of conformity of products with the requirements of the Technical
Regulation of the Customs Union "On safety of equipment operating under excessive pressure" (TR CU 032/2013), as per the
annex form No. 0638248.
Certification scheme: 1с.
ADDITIONAL INFORMATION The compliance of the equipment with the requirements of the technical regulation is
ensured by the direct implementation of the requirements of the technical regulation “On safety of equipment operating under
excessive pressure” (TR CU 032/2013) Article 4, p. 13, 16, 17, 25, 26, 29; Annex 2, p. 3, 10, 27, 28, 32, 37, 41, 43. Storage
conditions and periods – in accordance with the attached operational documentation. Usable life is assigned, in years, no less
than 5
EFFECTIVE PERIOD FROM 06.12.2019 UNTIL 05.12.2024
INCLUSIVE
The head (authorized person) of the
certification authority
(signature) Korchagin Pavel Aleksandrovich
(Full name)
Expert (expert-auditor) (experts (experts-
auditors))
(signature) Sazhchenko Dmitriy Evgenevich
(Full name)
[Seal: LIMITED LIABILITY COMPANY OGRN 1167746863356 * MOSCOW * "Product quality evaluation center"]
EURASIAN ECONOMIC UNION
ANNEX TO THE CERTIFICATE OF CONFORMITY No. EAEU RU C-DE. АЖ36.В.00023/19
Series RU No. 0638248
Information on the Certificate of conformity
Documents submitted by the submitter as evidence of conformity of products with the requirements of the Technical
Regulation of the Customs Union "On safety of equipment operating under excessive pressure" (TR CU 032/2013):
1. Externally mounted bridles for level gages, BZG. Safety case КУВ.ВЛРЕ.407629.01б.ОБ dated 05.04.2019.
2. Externally mounted bridle for level gages, model BZG. Data sheet dated 07.11.2019. Manufacturing No. 14357506.
3. Externally mounted bridle for level gages, model BZG. Data sheet dated 07.11.2019. Manufacturing No. 14357505.
4. Operating Manual. Externally mounted bridles for level gages, type BZG. 124902 dated 01.04.2017;
5. Drawings: No. 14357506.04,14357505.04 dated 25.09.2019;
6. Strength calculation results:
- project review report No. E-IS-AN 1-MAN-17-05-2641998-31133728а dated 21.06.2018, issued by TÜV SÜD Industrie
Service GmbH;
- project review report No. E-IS-AN1-MAN-17-09-2641998-115091153а dated 21.06.2018, issued by TÜV SÜD Industrie
Service GmbH;
- project review report No. E-IS-AN1-MAN-17-09-2641998-25134832 dated 25.09.2017, issued by TÜV SÜD Industrie
Service GmbH;
- project review report No. E-IS-AN1-MAN-17-09-2641998-25143734 dated 25.09.2017, issued by TÜV SÜD Industrie
Service GmbH;
7. Inspection certificates of conformity with EN 10204 - 3.1: No. 04475271, 04475307 dated 29.10.2019.
8. Inspection Certificates (including materials certificates) as per EN 10204: drawing No.
14357506.04 dated 05.11.2019; drawing No. 14357505.04 dated 05.11.2019;
9. Protocols of non-destructive penetration testing (PT): No. РТ191112_03, РТ19_1112_04 dated 12.11.2019;
10. Product manufacturing method description:
- assembly (methods) sheet: No. 08982906 dated 15.10.2019; No. 08982907 dated 16.10.2019;
- WPS welding procedure specification, WPQR welding process certificates package
11. Declaration of conformity with the requirements of Directive 2014/68/EU No. 1180_1 dated 31.01.2019;
12. Certificate of compliance with the requirements of Directive 2014/68/EU (Module C2) No. Z-IS-AN1-MAN-16-11-
2641998-15100910a dated 16.08.2017 issued by TÜV SÜD Industrie Service GmbH;
13. Certificate of compliance with the requirements of Directive 2014/68/EU (Module A2) No. Z-IS-AN1-MAN-16-11-
2641998-15100237а dated 16.08.2017 issued by TÜV SÜD Industrie Service GmbH;
14. Certificate of compliance with the requirements of Directive 2014/68/EU Annex III, Module D No. DGR-0036-QS-
1253-17 dated 01.08.2017 issued by TÜV SÜD Industrie Service GmbH;
15. Certificate of compliance with the requirements of Directive 2014/68/EU (Module B) No. Z-IS-AN1-MAN-17-09-
2641998-25110119 dated 25.09.2017 issued by TÜV SÜD Industrie Service GmbH;
16. Certificate of compliance with the requirements of Directive 2014/68/EU (Module B) No. Z-IS-AN1-MAN-17-12-
2641998-07130208 dated 07.12.2017 issued by TÜV SÜD Industrie Service GmbH;
17. Certificate of compliance of quality management systems with the requirements of ISO 9001:2015:
- registration No. 489155 QM15 dated 06.07.2018, issued by DQS GmbH;
- registration No. 001830 QM15 dated 06.07.2018, issued by DQS GmbH;
18. Documents confirming the qualifications of specialists and personnel of the manufacturer:
- certificates of welders: No. Z-IS-AN1-WZB-19-03-2873981-25122056 dated 25.03.2019, No. Z-IS-AN1-WZB-18-11-
2873981-19125857 dated 19.11.2018, issued by TÜV SÜD Industrie Service GmbH;
- certificates of non-destructive testing specialists: No. Z-SC-26443/DGR dated 03.02.2016, issued by SECTOR Cert GmbH
certification authority; No. 47401-VT 2 dated 21.03.2019, issued by Deutche Gessellschaft für Zerstörungsfreie Prüfung e.V.
certification authority.
The head (authorized person) of the
certification authority
(signature) Korchagin Pavel Aleksandrovich
(Full name)
Expert (expert-auditor) (experts (experts-
auditors))
(signature) Sazhchenko Dmitriy Evgenevich
(Full name)
[Seal: LIMITED LIABILITY COMPANY OGRN 1167746863356 * MOSCOW * "Product quality evaluation center"]
1