Eurodek Brochure - April 2012

7/27/2019 Eurodek Brochure - April 2012

1/20

R A I S E D A C C E S S F L O O R S

www.accessfloors.net


2/20

02

Contents

02-03 Introduction

04-05 Fortress

06-07 eBand

08-09 Base

10-11 GIFAfloor from Knauf

12-13 Pedestals

14-15 Accessories and Temporary Site Protection

16-17 Finishes

18 Fire Barrier

19 Cutting out the jargon

Solid Foundations

for BusinessEurodekRaised Access Floors present the ideal solution to the ever increasingdemands of modern interior fit-out projects in todays fast paced environment.

The development of technology and changes in

customer requirements means that a versatile

and high performance solution is required to

eliminate costly repositioning of services within

the workplace.

Eurodeks Raised Access Floor solutions facilitate

the delivery of power, telecoms, data and otherservices precisely where required and permit

easy re-configuration of interiors.

A perfect platform for business, Eurodeks Raised

Access Floors are designed to meet the most

demanding of new build or refurbishment briefs,

providing a cost effective and flexible solution.

Whether used for commercial offices, hospitals,

IT suites or reception areas, there is a Eurodek

Raised Access Flooring System product to satisfy

any project.

eBand

Base

Fortress


3/20

ApplicationsProducts

Fortress(pages 4-5)

eBand(pages 6-7)

Base(pages 8-9)

GIFAfloor(pages 10-11)

Call centres

Control rooms

Office areas

Data centres

Education & healthcare

Fire Sensitive Areas

Levelling solution

Public buildings

Receptions & Lift Areas Retail

Wet Areas

www.accessfloors.net 03

Where to use EurodekRaisedAccess Floors

The application selector table provides guidance

on the panel type to use and where to find

more detail in this brochure:

Quality & Standards

EurodekRaised Access Floor systems are

constructed from high quality materials to meet

the stringent specification

standards of BSEN 12825

& PSA MOB PF2 PS/SPU.

The chipboard sourced

for the Eurodek Base

and Fortress systems has

FSCChain of Custody

certification for peace of

mind when it comes to products being from

well managed sources.

Comprehensive Choice

A wide choice of finishes is available from

Eurodek, designed to complement any interior

design scheme or corporate guidelines. A

selection of the finishes available is shown on

pages 16-17.

Technical Support & Service

Fully trained staff have the expert knowledge

and experience to support any project and

extensive stocks of all core products are held,

ready for immediate delivery nationwide.

For designers and specifiers, Eurodek

products are listed within the RIBA

NBS Plus specification system.

For the latest up to date information, please

visit the Eurodekwebsite:


Why use an access floor?Accessible floor systems offer both the user and the building owner

great flexibility on how the workspace can be used and reconfigured.

The ability to route and re-route services, such as data and power

delivers great versatility. Eurodekoffers the following advantages.

Creates an open plan, versatile and flexible environment

Durable, cost effective solution for current and future business requirements

Delivers power, telecoms, data and other services precisely where required

Facilitates rapid and easy re-configuration, with minimal disruption

Provides passive ventilation or conditioned air options

Offers a wide choice of high quality, durable and aesthetic floor finishes

eBand

Key: Highly suitable Suitable


4/20

04

The EurodekFortress range consists of gravity loose lay panels, encapsulated

in corrosion resistant galvanised steel, with a high density chipboard core,

ideally suited to a wide range of applications, where strength and long life are

the primary concerns.

Mechanical stitching within the unique lid to tray

locking system gives strength and integrity to

the panels design. The panels have a galvanised

steel bottom tray with an out turned profile. The

steel lid is then rolled around the lower profile

creating a locked, double layer of steel.

EurodekFortress Lock screwdown panels are

also available, providing extra security where

required and greater integrity for high voids.

All panels are supplied bare to accept an

appropriate loose lay finish.

The unique design of Fortress means that the

panels achieve a variety of classifications. The

Fortress panel meets BSEN 12825 Classes 5A3,

3A3 and 2A3 when used with the EurodekHD

and XD range of pedestals and PSA MOB PF2

PS/SPU medium grade.

The chipboard sourced for the Fortress range of

panels has FSCChain of Custody certification.

Applications

Call Centres

Control Rooms

Office Areas

Data Centres

Education and Healthcare

Public Buildings

Retail

F O R T R E S S


5/20


Technical Information

PSA BSEN Class 3 BSEN Class 2

Size 600 x 600mm 600 x 600mm 600 x 600mm

Thickness 31mm 31mm 31mm

Weight 10Kg Approx 9Kg Approx 9Kg

Core High Density Chipboard

Casing Corrosion Resistant Galvanised Steel

PerformancePSA MOB PF2 PS/SPU Medium Grade

BSEN 12825:2001 -Class 3A3

BSEN 12825:2001 -Class 2A3

Point/Working Load (25mm2) 3kN 2.8kN 2.5kN

Uniformly Distributed Load 8kN/m2 - -

Ultimate Load (in excess of) - 8kN 6kN

BSEN Reference 5A3 3A3 2A3

Fire Rating Class 0

Electrical Continuity Yes Yes Yes

Full test data is available on request. All Fortress systems are available as Fortress Lock (Fortress 5A3

supplied as standard with full test data).

Performance advantages

Tested and certified to BSEN 12825 class

5A3, 3A3 and 2A3

Tested and certified to PSA MOB PF2 PS/SPU

medium grade

Unique design for added strength

and durability

Solid feel underfoot

Corrosion resistant for long life

Fortress Lock version for security or additional

rigidity at high voids

Supplied bare to accept any loose lay

floor covering

Fortress

Fortress Lock


6/20

06

The EurodekeBand system consists of a gravity loose lay panel with a high

density chipboard core, sheet steel base (and top sheet on Heavy Grade (HG)

panels). The protective PVC/ABS edge band makes the panels suitable for

applications which require a medium or high load bearing capacity.

Heavy Grade panels are supplied both with

bonded vinyl finishes or bare to accept a wide

range of loose lay floor coverings and meet

BSEN 12825 class 6A3 and PSA MOB PF2 PS/

SPU Heavy Grade standards.

Medium Grade panels supplied as standard

with a Steel Grey factory bonded antistatic vinyl

covering providing a hard wearing finish for

appropriate applications. eBand Medium Grade

panels achieve certification to BSEN 12825 class

4A3 and PSA MOB PF2 PS/SPU medium

grade when used with Eurodek XD range of

pedestals.

Applications

Call Centres

Control Rooms

Data Centres


Public Buildings

Retail

e B A N D


7/20



Manufactured to BSEN 12825 Classifications:

HG Bare: 6A3, HG Vinyl: 6A3, MG Vinyl: 4A3

Tested and certified to PSA MOB PF2 PS/SPU

medium OR heavy grade

Discreet yet strong edge detail for durability


Bare panels accept factory bonded carpet,

laminate and other coverings where required

eBand bare

eBand with bonded vinyl covering


ED39EB ED40EB-5030 ED41EB-5030

Size 600 x 600mm 600 x 600mm 600 x 600mm

Thickness 39mm 40mm 41mm

Weight 13.6Kg 13Kg 13.6Kg

Core 38mm deep, high density chipboard, class E2 two conductive springsCasing Corrosion Resistant Galvanised Steel

Top (sheet steel) 0.4mm - 0.4mm

Base (sheet steel) 0.8mm 0.8mm 0.8mm

Edges (PVC/ABS) 0.6mm 0.6mm 0.6mm

Floor Covering n/a Antistatic Vinyl colour - 5030 Steel Grey

Performance PSA MOB PF2 PS/SPU

PSA Heavy Grade PSA Medium Grade PSA Heavy Grade

Point/Working Load (25mm2) 4.5kN 3kN 4.5kN

Uniformly Distributed Load 12kN/m2 8kN/m2 12kN/m2

Performance BSEN 12825

Class 6 4 6

Safety Factor 4 3 4

Deflection Class All panels are deflection class A under application of working loadFire Rating Class 0

Electrical Continuity Yes Yes Yes


8/20

08

Eurodeks Base Range is available in both light and medium duty. This gravity

loose lay raised access floor system is manufactured from high density

chipboard. Suitable for all commercial office and general use applications,

these panels are ideal where cost is the primary concern in a project.

The Base range is available as standard 38mm

deep panels with 30mm panels available on

request. Panels are manufactured in accordance

with EN 312-6:2003 standards. The panel is

supplied bare to accept a wide range of loose

lay floor coverings.

Eurodeks Base range has FSCChain of

Custody certification, using chipboard from well

managed sources.

Applications

Office Areas

Levelling Solution

B A S E


9/20


Performance advantagesMeets the manufacturing requirements of

EN 312-6 :2003

Cost competitive system

High density chipboard for strength

Light weight for ease of lifting

Accepts a wide variety of loose lay floor

coverings

Bare Base Panel


Light Duty Medium Duty

Size 598 x 598mm 598 x 598mm

Thickness 30mm 38mm

Weight 6.8Kg 8.6Kg

Core30mm deep,

high density chipboard38mm deep,

high density chipboard

PerformanceTested & Conditioned in accordance with BS EN 312:2003.

Manufactured to EN 312-6:2003


10/20

10

The Knauf Integral GIFAfloor system is a partial-access floor system using

natural gypsum based (calcium sulphate) tongue & groove panel installed on

a conventional 600mm grid access floor under structure. Once installed, the

floor is flat and smooth and joints will not track through the applied finish,

and access can be incorporated with conventional access floor panels or

access frames.

Manufactured from highly compressed calcium

sulphate, this panel is of a homogenous

monolithic material ideal for applications where

acoustic properties and durability are paramount.

GIFAfloor is also the ideal replacement for floor

screed particularly in multi-storey projects where

cost and time savings are essential.

Knauf Integral GIFAfloor F181 single layer is

Ideal for raised floor areas requiring continuous

finishes such as sheet vinyl, rubber or linoleum.

For hard finishes such as stone and ceramic,

F182 double-layer or F183 triple-layer GIFAfloor

provide superb stability.

Applications

Office Areas


Fire Sensitive Areas

Levelling Solution

Receptions and Lift Areas

Retail

Wet Areas

G I F A F L O O R

GIFAfloor tongue andgroove construction


11/20



Tested and certified to BSEN 13213

1200x600mm format for quick installation

and superb stability


Inert material up to F60 fire resistant

Completely dry system

Excellent alternative to screed

Accessible void via run of conventional

panels or access hatch

GIFAfloor supplied bare toaccept a wide range of finishes


F181 Single Layer F182 Double Layer

Size 1200 x 600mm & 600 x 600mm

Thickness* 28mm 32mm

Weight 42Kg 48Kg

Core Calcium Sulphate

Performance BSEN 13213

Point Load (25mm2) Class 3 Class 5

Uniformly Distributed Load n/a

Fire RatingA1 to EN13501-1

F30/F60 resistance

Electrical Continuity n/a

* Other thicknesses available on request


12/20

12

XD Pedestals

Eurodeks XD pedestals comprise full steel

pedestals designed to meet the requirements

of medium to extra heavy duty applications for

Eurodekraised floor systems, and provide anideal solution where extra rigidity or greater floor

heights are required.

MD Pedestals

Eurodeks MD pedestal range are full steel

pedestals designed to meet the requirements of

light to medium duty applications for Eurodek

raised floor systems.

Pedestals, sometimes referred

to as up-stands or legs, are an

integral part of any raised access

floor system. The EurodekRaised

Access Floor system incorporates

a wide selection of different grade

pedestals, available in a varietyof heights from 26mm to achieve

many finished floor levels.

Constructed from corrosion resistant steel,

all Eurodekpedestals incorporate a locking

nut to offer a position locking facility, and are

manufactured for use with all EurodekRaised

Access Floor Systems.

Eurodekpedestals can be supplied with a

variety of hole centres, slotted to take stringers,

or with angle heads where floor ramps are

required.

HD Pedestals

Eurodeks HD pedestal range comprises

full steel pedestals designed to meet the

requirements of medium to heavy duty

applications for Eurodekraised floor systems.

P E D E S T A L S


13/20


Gaskets

All Eurodekpedestals can be used with the

full Eurodekgasket (or cap) range. Gasket

types vary dependent on the panel & systemapplication.

Fortress T section Gasket

Standard Gasket suitable for stringers

Base Gasket

Stringers

Stringers are available that either clip-on or bolt-on to pedestal heads to provide enhanced lateral

strength and stability. They are necessary where high finished floor heights (recommended over

600mm) are required.

Base Gasket

Standard Gasket suitable for Stringers

Fortress T Section Gasket


14/20

14

ACCESSORIES & TEMPORARY SITE PROTECTION

1 Air Grilles

Air Grilles are available where air circulation is

required. Easily interchangeable with standard

panels, air grilles are ideal for controlling airflow

in control rooms and data centres. Made to

order and can include dampers.

2 Floor Sealer

A water based PVA floor sealer to prepare the

floor surface and suppress moisture and dust.

3 One Part Pedestal Adhesive

Supplied in 9Kg tubs, one part pedestal

adhesive is convenient and easy to use to bond

pedestals to pre-sealed concrete floors.

4 Two Part Pedestal Adhesive

Two Part solvent-free polyurethane adhesive is

also available from Eurodek, specially designed

for bonding pedestals to pre-sealed concrete

floors.

5 Lifting Tools

A range of lifting tools is available for use with

bare panels or panels with carpet, vinyl or

laminate bonded floor coverings.

6 Aluminium Tape & Foam Strip

Moisture resistant and class O fire resistant

aluminium tape for sealing the edges of cut

panels and Class O fire resistant foam strip for

the perimeter panels, to fill the gap between the

panel and the abutment.

7 Outlet Boxes

Outlet boxes are available to house power,

data and telecom accessories where optimum

flexibility is required. Other sizes are available on

request.

8 Grommets

Flooring grommets are available to allow

protected access to cables through the raised

access floor.

9 Lasers

A wide range of high visibility, self levelling

interior lasers, suitable for reaching the required

consistent floor height, is available from your

local Eurodek stockist.

10Carpet Protection Film

Manufactured from a tough polythene film

with a special low tack adhesive back, carpet

protection film is ideal for protecting carpets on

a temporary basis without creating a trip hazard.

Dispensers are also available on request.

11Tack Mats

Heavy Duty Rubber Framed Tack Mats are

suitable for entrances to sensitive areas.

Consisting of 30 layers of non-transferable resin

on each mat, loose dirt par ticles are retained in

the resin to keep entrances clear.

12Twin Shield

Twin-wall lightweight polypropylene boards

suitable for protection of all types of flooring.Durable, impact resistant and water/chemical

proof, TwinShield also conforms to LPS1207

Flame Retardant standards and is easily and

quickly cut or creased to fit on site.

13Overshoes & Dispensers

Light, durable, non-staining and biodegradable

overshoes are available to provide grip and

prevent slipping on many floor surfaces. Suitable

up to size 14 shoes and size 12 on rigger boots.

Dispenser and carry case also available.

1

2

4

3


15/20


5

6

7

8

9

10

11

12

13


16/20

16

Eurodek can supply an extensive

choice of raised access floor

coverings to create the desired

effect or harmonise with existing

interior finishes. Sample floor

finishes can be requested from

Eurodek stockists to ensurethe raised access flooring panels

match the aesthetic and practical

requirements of any project.

F L O O R C O V E R I N G S

Vinyl

Eurodeks Raised Access Floors offer a wide

range of anti-static vinyl floor coverings (the

most popular shown here). Factory bonded vinyl

is steel grey as standard; however, an extensive

range of additional vinyl finishes is available, on

extended lead times, upon request.

Spare pads and sheet vinyl are also available for

ramp areas.

Steel Grey WoodgladeTeal

Ocean BlueGolden Sand


17/20


Carpet

Eurodek offers a wide variety of loose lay

carpet tiles in both loop and cut pile (the most

popular shown here) to complement the bare

finished panels. The full range of options is

available on request. Loose lay tiles allow quick

and easy replacement for very little expense.

Loose Lay Sigma (Loop Pile)

Loose Lay Generation (Cut Pile)

Anti-static factory pre-bonded carpet panels

can be requested on longer lead times where

immediate access to the sub floor is required.

PVC sit-on skirting and stair nosing can be

supplied to finish the project.

Other finishes

The following non-stock bonded finishes are

available to order on longer lead times.

High pressure laminate

Wood effect panels

Studded and plain rubber

Checker plate metal finishes

For full details of Eurodekfinishes,

please visit the Eurodekwebsite at


Please note: Every effort has been made to give a truerepresentation of the finishes shown, however Eurodekcannot

guarantee 100% accuracy due to the constraints of the printing

process.

Loose Lay Sigma (Loop Pile)

Loose Lay Generation (Cut Pile)

Barley

Cloud

Red

Stone

High Pressure Laminate

Studded Rubber

Wood Effect

Metal Checker Plate

Dark Green

Lead

Slate

Sunlight

Evening Blue

Ocean

Granite

Sky Blue


18/20

18

F I R E B A R R I E R

EurodekUnder Floor Fire Barrier is a high density mineral wool and foil facedfire, smoke and acoustic barrier for raised access floor voids.

Supplied both cut to size or in slab form, the fire

barrier is suitable for voids between 15mm and

1000mm and can provide up to 120 minutes

fire resistance, preventing the passage of flame

and smoke through the void.

Eurodeks Fire Barrier also has acoustic

properties to reduce flanking transmission of

sound through the void by at least 9dB. Where

the barrier is installed beneath a partition

line into an imperforate timber based access

floor system of at least 30mm thickness, with

floor covering over, the room to room sound

reduction on the path of the fire barrier will be at

least 45dB.


1. Subdivision of large uninterrupted cavities.

i) To comply with Building Regulations

30 minutes integrity plus 15 minutes

insulation.

ii) To comply with LPC Design Guides

30 minutes integrity plus 30 minutes

insulation.

2. Alignment under a partition, to maintain

partition rating.

i) 30 minute partition 30 minutes integrity

plus 30 minutes insulation.

ii) 60 minute partition 60 minutes integrity

plus 60 minutes insulation.

iii) 120 minute partition 120 minutes

integrity plus 120 minutes insulation.

TypeFire

ResistanceBarrier

ThicknessMax Void

SupportedMax Void

UnsupportedNo.of Slabs per carton

(slab size mm)No.of Slabs per pallet

(slab size mm)

1/2 hr RAF barrier 30 mins 50mm 250mm 600mm 9 (1200 x 600) 36 (1200 x 1200)

1hr RAF Barrier 60 mins 75mm 400mm 600mm 6 (1200 x 600) 24 (1000 x 1200)

2hr RAF Barrier 120 mins 100mm 400mm 600mm 4 (1200 x 600) 18 (1000 x 1200)

High Void RAF Barrier 30-60mins 150mm 600mm 1000mm n/a 9 (1000 x 1200)

4hr RAF Barriers are available, please contact us. N.B 75mm for voids 401 to 600mm and 100mm for voids 401 to 600mm

Detailed acoustic test results and full installation instructions are available on request.


19/20


C U T T I N G O U T T H E J A R GO N

In the UK and Europe the recognised marks of quality and performancestandards are indicated by BSEN and PSA certifications.

BSEN Specification

This specification is now recognised as a British

Standard BSEN 12825, approved by CEN as

a voluntary specification for private projects and

mandatory public projects.

BSEN specification classifies Raised Access

Floors based on the load at which failure

occurs, referred to as the ultimate load. This

classification is also based on a chosen safety

factor and deflection under working load. For

example a class 3A3 panel means

3 = Ultimate Load the point at which the

system would collapse

A = Deflection Class

3 = Safety Factor

BSEN classification is based upon the panels

actual structural performance and not against

pre-set criteria as per the PSA specification.

PSA Specification

The PSA specification is a long established

performance standard used by the Property

Services Agency and now referred to as MOB

PF2 PS/SPU outlining grades of raised access

floor, light, medium and heavy.

The PSA specification outlines a method of

test for structural performance. This ensures

compliance and provides guidance as to the

working areas where each floor grade may be

used. Point Load and Uniformly Distributed Load

are used here.

Void

The space between the

underside of a raised access

floor and the existing sub-

floor, sometimes referred to

as the cavity or plenum

Finished Floor Height

The finished floor height from

the sub-floor, void height and

panel thickness combined

Sub-Floor

The existing floor upon

which a Raised Access

Floor system is installed

Pedestal

The vertical, adjustable

supporting component of a

Raised Access Floor system

Panel

The load bearing,

horizontal component of a

Raised Access Floor system


20/20

Head Office

Hillsborough WorksLangsett Road

Sheffield S6 2LWT: 0114 231 8030 F: 0114 231 8031

Find a Eurodekstockist atwww.accessfloors.net

Date post:	13-Apr-2018
Category:	Documents
Upload:	stacey-hayes
View:	219 times
Download:	0 times

Eurodek Brochure - April 2012

Documents