KFT.05.801.20000.B

Mounting InstructionsTWISTED THROTTLE products should be installed by a qualified, experienced motorcycle technician. If you are unsure of your ability to properly install a product, please have the product installed by your local motorcycle dealer. TWISTED THROTTLE takes no responsibility for damages caused by improper installation.

All screws, bolts, and nuts, including all replace-ment hardware provided by TWISTED THROTTLE should be tightened to the torque specified in the OEM maintenance manual for your motorcycle. If no torque specifications are provided in the OEM maintenance manual, the following torques may be used:

M5...........................................3.5 ft-lbs (5 Nm) M6...........................................7 ft-lbs (9.6 Nm) M8..........................................13 ft-lbs (18 Nm)

All screws, bolts, and nuts should be checked after driving the first 30 miles (50 km) to ensure that all are tightened to the proper torque.

Medium strength liquid thread-locker (i.e., "Locktite") should be used to secure all screws, bolts, and nuts.

Evo-SidecarrierSuzuki DR-Z 400 S 00-,400 SM 05-

Twisted Throttle LLC1080 Kingstown Rd, Building 1Peace Dale, RI 02879

phone: 401.284.4200fax: 401.223.6955www.twistedthrottle.com

2 Quick LockFastener

CAM.2312S21-12AHNV

Pieces...................8

1Evo-Sidecarrier

KFT.84.012.961/962Pieces............2(L/R)

3 RetainingRing

CAM.2312S10-1BPPieces...................8

5 Spacer

Da:18, Di:8.4, h:12 Pieces...................2

4 Front RightFixing Lug

KFT.84.012.002Pieces...................1

7 Hex HeadScrew

M8 x 30......DIN 931Pieces...................2

6 Washer

M8, StandardPieces...................4

9 Spacer

Da:20, Di:06.4, h:45Pieces...................2

8 Top Fixing Lug

KFT.00.061.001Pieces...................2

11 Hex HeadScrew

M6 x 70......DIN 931Pieces...................2

10 Washer

M6, StandardPieces...................4

13 Lock Nut

M6...........DIN 6927Pieces...................2

12 CenterFixing Lug

KFT.84.012.003Pieces...................1

14 Spacer

Da:20, Di:8.2, h:06Pieces...................2

16Rear Fixing Lug

KFT.00.061.004Pieces...................1

15 Hex Head Screw

M6 x 30......DIN 931Pieces...................4

17 Lens Head Screw

M6 x 20....DIN 7380Pieces...................2

18 Front LeftFixing Lug

KFT.84.012.001Pieces...................1

19 Hex HeadScrew

M8 x 20......DIN 933Pieces...................2

54

67

9 810

11

17 16

15

10

14

13

12

!!

!

!

!

Driving Direction

Left seat mounting point assembly same as right side shown

If mounting OEM rear rack, spacer #9 is not needed.

3

1

186

19

8

Orig

inal

Har

dwar

e

Orig

inal

Har

dwar

e

Use a coin or screwdriver to detach the quick fasteners of the QUICK-LOCK side carriers.

2

3

!