exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle
East/Asia
Central Europe
Page 1 of 26
9/18/2017
1 Overview
Purpose
ExacqVision recorders now include Kantech Entrapass CE software. The purpose of this document is to guide the technician or
installer through the process of installing and registering Kantech Entrapass CE. It is required that the individual performing this
task is a Kantech Certified Technician in order to register the product.
More information about Kantech Entrapass CE can be found by visiting Kantech’s website:
http://www.kantech.com/Products/software_entrapass_ce.aspx
IMPORTANT NOTE: Section 4 “Kantech Permission Repair” is NOT REQUIRED if performing a new installation of Entrapass version 7.30.48 or later.
2 ExacqVision Installation
NOTE: It is imperative that ExacqVision be installed and fully licensed before installing Kantech Entrapass. If this step is not
completed correctly, you will see a prompt for a serial number in the Entrapass installation process.
exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle
East/Asia
Central Europe
Page 2 of 26
9/18/2017
ExacqVision Installation:
1. Visit https://www.exacq.com and select Support>Software Downloads.
exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle
East/Asia
Central Europe
Page 3 of 26
9/18/2017
2. Select the appropriate version for your system.
3. When prompted for login credentials on the website, entire username “guest”, password “exacqvisionip” and run the
installation file.
exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle
East/Asia
Central Europe
Page 4 of 26
9/18/2017
Once ExacqVision is installed and licensed, you may begin the Kantech Entrapass installation without issue.
3 Kantech Installation
Entrapass Software Installation
Perform the following steps to install the included version of Kantech Entrapass CE on the exacqVision recorder.
NOTE: If you have previously configured “kiosk mode” for other users on the system, please log out, and log back in as “admin”
before continuing.
1. Find the Kantech folder on the desktop.
exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle
East/Asia
Central Europe
Page 5 of 26
9/18/2017
2. Open the EPCE 6.05.38 folder
3. Run the Setup.exe to start the installation.
exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle
East/Asia
Central Europe
Page 6 of 26
9/18/2017
4. Click OK to begin the installation process.
5. Step through the installation, selecting
It is recommended to install the full package at this step.
exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle
East/Asia
Central Europe
Page 7 of 26
9/18/2017
6. Here you will be naming the Kantech system. Continue to step through the installation process.
exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle
East/Asia
Central Europe
Page 8 of 26
9/18/2017
Your installation is now complete.
The desktop will now show five new icons.
a. Workstation
b. Server
c. Gateway
d. Smartlink
e. Entrapass Web
DO NOT double click the Entrapass Web shortcut icon that the installer
has placed on the desktop. The pre-determined parameters of this
shortcut are not correct for being installed on an exacqVision recorder.
This icon can be deleted from the desktop.
Later, during the configuration of the EntrapassWeb client, you will be
instructed to launch the EntrapassWeb Setup shortcut icon found in the
Kantech folder on the desktop.
Please continue to Permission Repair
exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle East/Asia
Central Europe
Page 9 of 26
9/18/2017
4 Kantech Permission Repair
Vital Steps for Windows 10 Installations
Kantech Entrapass requires 2 permissions changes and 1 exclusion change (Windows Defender) for full functionality.
NOTE: This only applies to Windows 10 at this time.
1. Open the Kantech program file folder. (C:\Program Files (x86)\Kantech) A. Right click on
the Kantech folder.
B. Select Properties
C. Find the Security tab in the properties window.
D. Select the Users group.
E. Click the Edit button
F. Click the check box for Full Control
G. Click Apply, and OK, and close these windows.
exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle East/Asia
Central Europe
Page 10 of 26
9/18/2017
2. Click the start button and type “regedit”. Select the “regedit.exe” option that appears. This will open the Registry Editor.
exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle East/Asia
Central Europe
Page 11 of 26
9/18/2017
3. Navigate to the “HKEY_LOCAL_MACHINE/SOFTWARE/WOW6432Node/Kantech” folder
A. Right click the Kantech folder.
B. Select Permissions from the menu
C. Select the users group
D. Click the Full Control check box
E. Click Apply, and OK, and close these windows.
exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle East/Asia
Central Europe
Page 12 of 26
9/18/2017
4. Entrapass on Windows 10 requires an exclusion in Windows Defender. (Call Kantech
support if you have questions regarding interactions with other forms of cyber-security
software.)
B. Open Windows Defender
C. Click Settings
D. Locate “Exclusions” at the bottom of the page that opens.
E. Click “Add an exclusion”
exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle East/Asia
Central Europe
Page 13 of 26
9/18/2017
5. Click “Exclude a folder” and locate the Kantech folder in Program Files (x86). Highlight
this folder and click the “Exclude this folder” button.
exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle East/Asia
Central Europe
Page 14 of 26
9/18/2017
5 Registration
Once Entrapass CE is installed it must be registered
IMPORTANT NOTE: The person doing the registration must be a Kantech Certified Technician.
At this point you can open the Workstation application.
A. Click “Click here to login” in the top left corner.
B. Apply the temporary password provided (highlighted in yellow) to the password text box to login.
exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle East/Asia
Central Europe
Page 15 of 26
9/18/2017
1. Click on the Options tab
2. Then click on Registration
3. Click the “Click here to register” button to
register
4. Contact Kantech using the information
provided to register. Certified
technicians can complete the
registration process online at
www.kantech.com if they have a
member center account.
2
1
5
6 4
3
exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle East/Asia
Central Europe
Page 16 of 26
9/18/2017
IMPORTANT NOTE: The person doing the
registration must be a Kantech Certified
Technician.
5. When a confirmation code is received enter it here.
6. The OK button will become enabled upon entering a proper
confirmation code.
Click OK when done entering code.
Click Close button.
When prompted for Connection Password change it
is OK to leave these fields blank and click Cancel.
exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle East/Asia
Central Europe
Page 17 of 26
9/18/2017
Close the Workstation application.
Answer YES to both of these questions if
prompted.
EntrapassWeb Client Setup
Open the Kantech folder on the desktop and launch the EntrapassWeb Setup shortcut.
A browser will open with a prompt to install Microsoft Silverlight. Click “Click now to install” to continue.
exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle East/Asia
Central Europe
Page 18 of 26
9/18/2017
Click “Run” to begin installation.
When prompted for User Access Control, click Yes.
exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle East/Asia
Central Europe
Page 19 of 26
9/18/2017
Click “Install now” to install Silverlight.
These two options are of no consequence.
Make Bing my search engine
Make MSN my homepage
They are checked by default but they can be
unchecked if desired.
The option “Enable Microsoft Update
(recommended)” is recommended to leave
checked (its default state).
Click Next.
exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle East/Asia
Central Europe
Page 20 of 26
9/18/2017
Installation is complete.
Click Close.
Upon clicking “Close” from the Silverlight installation, another browser instance or tab should launch prompting for the Tyco
EntrapassWeb install. If it does not, manually open the “EntrapassWeb Client Setup” application in the Kantech folder.
Click “INSTALL”
exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle East/Asia
Central Europe
Page 21 of 26
9/18/2017
When prompted with the Security Warning, click “Install”.
When the install completes, a login prompt should be displayed. There are key things to look for here.
1. Username: admin
2. Password: admin256
3. Ensure name here is as expected
exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle East/Asia
Central Europe
Page 22 of 26
9/18/2017
4. Ensure that this says “Powered by
Kantech”. If you only see “Powered by…”,
then a connection has not been
established with the Kantech services and
there is a problem.
Final Steps and Cleanup
3
1
4 2
exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle East/Asia
Central Europe
Page 23 of 26
9/18/2017
Another tab or web browser may open
indicating that you can launch
EntrapassWeb from the Start Menu of
Windows. This window can be closed.
exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle East/Asia
Central Europe
Page 24 of 26
9/18/2017
Clean up the desktop by deleting or moving the
Kantech installer off of the exacq recorder. This will
free up about 1 GB of space on the OS/boot drive.
Your desktop should now look like this →
Delete or move off of exacq recorder
exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle East/Asia
Central Europe
Page 25 of 26
9/18/2017
Backup Configuration
There is a limited amount of space on the local hard drive. A remote location for the backup operation of
Entrapass should be considered. It is recommended that you configure the backups to target a network
share or other removable media such as a USB drive or CD. To do this, perform the following steps.
1. Open Workstation
2. Click Options
3. Click Backup Scheduler
4. Select “Specific Folder” radio button
5. Click on the browse icon
6. Click on the drop down box
7. Select network share or removable media (in this example, a USB drive with drive letter E:\)
8. Click OK
9. Repeat steps 1 - 8 for each tab, Data, Archive, In/Out and Video event
NOTE: The “Default folder” setting will write this data to the “C:\Program Files (x86)\Kantech\Server_CE\” area. This setting
is not advisable because it resides on the exacqVision local drive.
2
3
4 5
6
7
8
1
exacqVision-Entrapass (W10) Installation Guide
www.exacq.com
+1.317.845.5710
+44.1438.310163
+31.485.324.347
USA (Corporate
Headquarters)
Mexico
Europe/Middle East/Asia
Central Europe
Page 26 of 26
9/18/2017
The installation and registration process is now complete. Please see the integration guide here, exacqVision-Entrapass Integration Guide to continue with integrating Entrapass with exacqVision.