1. Wear Safety Equipment.2. Keep hands and feet clear.3. Beware of flying objects.

Prior to removing any pins or parts refer to Manufacturers Service manual for proper procedures for securing and stabilizing equipment.

See back for Pin Removal / Insertion specifications and recommended Slide Sledge® tool kit.

Excavator 20 Ton Class Application Chart

MACHINE MODELS CASE CX210, CX225SR CAT 318C, 320C “B”, 322C “B” DAEWOO SOLAR 220 LC-V DEERE 200C LC, 225C RTS HITACHI ZX200 LC, ZX225US HYUNDAI R210LC-3 JCB JS220 KOBELCO SK210LC, 200SRLC, 235SRLC KOMATSU PC200LC-7, PC228USLC-3 LINK-BELT 210LX, 225 SPIN ACE NEW HOLLAND EC215-LC, EW200 VOLVO EC210B

Operating Weight: 40,000 - 49,000 lb.

123456789

10

11

Bucket TeethBucket to Linkage PinBucket to Stick PinStick Linkage PinBucket Cylinder Rod End to LinkageBucket Cylinder PinStick Cylinder Rod End PinStick to Boom PinCylinder Pin to StickA. Boom to Frame (insert ONLY)B. Boom Cylinder Rod EndTrack Master Pin (Slip Pin)

1

5 2

4 3

6

7

8

9

10

11

A

B

The following removal and insertion tips are manufacturer recommendations for this model. Other model excavators may use similar tips and tools for similar removals. Consult with manufacturer for specific models and uses.

Removal and installation should only be performed on pins that have been properly serviced and maintained.

Recommended Tool Kit for 20 Ton Class ExcavatorsProduct Part#13 lb./46" Slide Sledge 26050

28050252252529025291252802527025325

1001001

1 1/4" Pin Driver2" Pin Driver1/2" Bucket Tooth Remover1/2" Bucket Tooth InserterUtility Wedge5 lb. Add On Weight

14 lb./30" Slide Sledge7/8" Pin Driver

Excavator 20 Ton Class Application ChartOperating Weight: 40,000 - 49,000 lb.

Tool/Tip Description Part##1

#2

#3

#4

#5

#6

#7

#8

#13

#10AB

#11

R/I ToolR/I TipR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolInsert TipR/I TipR/I ToolR/I TipAccessory

14 lb./30" Slide Sledge1/2" Bucket Tooth Remover1/2" Bucket Tooth Inserter13 lb./46" Slide Sledge1 1/4" Pin Driver13 lb./46" Slide Sledge1 1/4" Pin Driver13 lb./46" Slide Sledge1 1/4" Pin Driver13 lb./46" Slide Sledge1 1/4" Pin Driver 13 lb./46" Slide Sledge1 1/4" Pin Driver13 lb./46" Slide Sledge1 1/4" Pin Driver13 lb./46" Slide Sledge1 1/4" Pin Driver13 lb./46" Slide Sledge1 1/4" Pin Driver13 lb./46" Slide Sledge2" Pin Driver1 1/4” Pin Driver13 lb./46" Slide Sledge7/8" Pin Driver5 lb. Handle Weight

280502528025270260502529026050252902605025290260502529026050252902605025290260502529026050252902605025291252902605025225

1001001

Item