Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | … · American Packaging • 1515...

Equipment Catalog

*Prices subject to change without notice.

Your Complete Source for Packaging Machinery

American Packaging • 1515 Alvarado Street • San Leandro • CA• p 510.877.9000

www.amerpkg.com Page 2

Table of Contents Adhesive Tape Seal Machine…………………………………………………………….. 4 Air Pillow Machines……………………………………………………………………………. 5 Bag on a Roll Bag Sealers-Semi and Fully Automatic………………………… 6-7 Band Sealers –Vertical and Horizontal……………………………………………….. 8 Banding Machines (Paper and Plastic)………………………………………………. 9-10 BOPP/OPP/ Co-Ex Film……………………………………………………………………….. 11-12 Carton Sealers …………………………………………………………………………………… 13-17

Manual Adjust……………………………………………………………………………… 13-15 Automatic random with flap folding……………………………………………. 16 Hi-Speed fully automatic random……………………………………………….. 16 Carton Erectors…………………………………………………………………………… 17 Pack assist stations……………………………………………………………………… 17

CD/DVD Overwrap Machines……………………………………………………………… 18-19 Checkweighers…………………………………………………………………………………… 20-21 Clam Shell Sealers………………………………………………………………………………. 22 Conveyors …………………………………………………………………………….………….. 23-28

Power Belted, and Stainless Steel Washdown………………………………. 23 Narrow width plastic slat top or stainless steel conveyor……………. 24 Flighted conveyors and Specialty conveyors……………………………….. 25 Flexible Skatewheel, Flexible Roller and Powered Roller…………….. 26 Gravity roller curve conveyors, 90 degree gravity curve……………… 27 Straight sections of gravity roller conveyor………………………………….. 28

Cutting Machines (Hot and Cold)………………………………………………………. 29 Drop Sealer and Bag Opener………………………………………………………………. 30 Filling Equipment………………………………………………………………………………. 31-32

Auger Fillers………………………………………………………………………………….. 31 Piston Fillers…………………………………………………………………………………. 32 Friction Feeders/ Batch Counting / Collating Systems……………………… 33-34 Horizontal FFS (Form, Fill and Seal) machines………………………………….. 35-44

Entry Level………………………………………………………………………………….. 35-37 Medium Duty………………………………………………………………………………. 38-39 Hi Speed with Servo Drive…………………………………………………………… 40 Hi Speed horizontal FFS shrink wrapping machine…………………….. 41-42 Horizontal FFS for pouches 3 or 4 sided seal………………………………. 43-44

“I” Bar Sealers and Table Top “L” Sealers…………………………………………….45 Impulse Sealers (Hand and foot operated)………………………………………… 46-47 Induction Sealing Equipment……………………………………………………………… 48 Ink Jet System…………………………………………………………………………………... 49 L'Sealers - Fully Automatic…………………………………………………………………. 50-54

Entry level “Economy Series”………………………………………………………. 50 L’ Sealer and tunnel combination systems…………………………………… 51 Hi speed automatic L’ Sealer……………………………………………………….. 51-54

L'Sealers - Semi Automatic…………………………………………………………………. 55-59 All-in-One Chamber machines…………………………………………………….. 57 L’ Sealer –Tunnel Combination machines……………………………………. 57-59



Label Dispensers………………………………………………………………………………… 60 Label Machines…………………………………………………………………………………… 61-62 Mail Wrapper / Mail Bagging……………………………………………………………… 63 Metal Detection Equipment………………………………………………………………… 64-65 Entry level…………………………………………………………………………………… 64 Hi Quality German manufactured heads……………………………………… 65 Poly Bundlers/Sleeve Wrappers………………………………………………………… 66-68 Semi-Automatic…………………………………………………………………………… 66 Fully Automatic In-Line………………………………………………………………. 66

Fully Automatic Right angle………………………………………………………… 67-68 Ribbon Blender/Mixers…………………………………………………………………….. 69 Shrink Films (Polyolefins)………………………………………………………………….. 70 Shrink Tunnels……………………………………………………………………………………. 71-74 Shrink Banding Tunnels (For shrink bands or neck bands etc)………… 75-76 Shrink Sleeve Applicator……………………………………………………………………77-80 Steam Tunnels……………………………………………………………………………………. 81-82 Side Seal Machines……………………………………………………………………………… 83-84 Intermittent motion…………………………………………………………………….. 83 Continuous motion (High Speed-Servo Drive)……………………………… 84 Strapping Machines…………………………………………………………………………….. 85-87 Semi-Automatic…………………………………………………………………………… 85

Fully Automatic…………………………………………………………………………… 86-87 Stretch Wrapping Machines………………………………………………………………. 88-92 Tray Sealing-MAP Sealing Equipment………………………………………………… 93-94 Turntables-(Lazy Susan, Accumulation and Unscrambling)……………… 95 Twist Tie Machines……………………………………………………………………………… 96 Vacuum Chamber Machines……………………………………………………………….. 97-98 Vacuum Sealers (Entry Level, Medium Duty and Heavy Duty)…………… 99-102 Vacuum Bags…………………………………………………………………………………….. 103 Vertical FFS (Form, Fill and Seal) machines………………………………………. 104-111

Vertical Sachet for 3 or 4 sided seal……………………………………………. 105 Vertical FFS for Liquids………………………………………………………………. 106 Weigh Scales for vertical FFS (2,4,10,14,16 and 20 heads)………….. 107-108 “Z” Bucket Elevators……………………………………………………………………. 109 Incline Feeding Conveyors………………………………………………………….. 109 Discharge Conveyors…………………………………………………………………… 109 Working Platforms……………………………………………………………………… 109 Auger Fillers……………………………………………………………………………….. 109 Volumetric Fillers……………………………………………………………………….. 110 Screw Conveyors…………………………………………………………………………. 111

Weigh Scales (Counting, Filling, Bench and Floor)…………………………….. 112-120 Weigh Fill Scales ………………………………………………………………………………. 121-122 X-Ray Inspection Equipment ……………………………………………………………… 123



ADHESIVE TAPE SEAL MACHINE

The TA-20 Adhesive Tape Machine is designed to apply a ¾” wide clear adhesive tape strip around the perimiter of any container or lid to secure it and provide a tamper evident seal. Will wrap a large variety of container sizes from 7” -14.5” (180-370mm) wide x 1” -14” (25-350mm) high *Custom sizes also available With the TA-20 tape sealing is done quickly and smoothly with production rates of up to 500 pcs per hour.

Model RETAIL

TA-20 $14,995

3/4” (18mm) wide clear adhesive tape roll, 2 mill OPP material 1,475 ft long rolls (450 meters)

$10.50

(240 roll minimum order)



AIR PILLOW MACHINES

QD-250 Air Pillow Machine

The QD-250 air pillow machine is designed for businesses who want to gain a big business advantage. Impress your customers with a clean, efficient and smart way to pack and protect your product. QD-250 is simple to use with an entry level price point.

The QD-250 will suit those operations that:

• Have limited space requirements or are in multi-functional work spaces• Are occasional users of larger volumes of void fill• Are low volume, small box shipper

Model RETAIL

QD-250 $1,795

4” x 4” x 40 Micron x 100 meter rolls (1,000 pillows) Master case-24 rolls

$20.50 $ 387

5” x 8” x 40 Micron x 100 meters (750 pillows) Master Case-24 rolls

$32.85 $ 314

QD-250 Air Pillow Film

We recommend film thickness of 40 microns

Three sizes available: 4”x4”, 4" x 5" and 5”x8”

Cubic volume capacity: 28 cubic feet or 2 bags of packing peanuts (14 cu ft each)

1-roll 100m 4”x8”/5”x8” film = 28 cu ft 2-roll 100m 4”x4” film = 28 cu ft



BAGS ON A ROLL-MANUAL/AUTO BAGGING MACHINES

T-200 T-275 T-300 MODEL NO. DESCRIPTION RETAIL

T-200 Table Top Pre-Opened bags on a roll. Simply pull the bag into the loading

and sealing position to allow the bag to blow open. Insert the product and press a footswitch or guard switch to seal the bag then pull the next bag into position.

The bags remain connected and can be separated at the perforated line. Features dwell time and heat controls, Universal funnel. 110 or 220 volt, 40 PSI

1/16” wide seal, Up to 11” wide bags x 16” long. Dims:20” W x 14” L x 21” H

$2,395

T-275 Same specs as above with added feature of automatically feeding and

advancing the bag into position. 4 color touch screen with manual operation or Automatic “paced” operation for faster cycle speeds. Maximum pass through

height is 2.75”

$5,350

T-300 Fully Automatic-with automatic indexing, sealing and tear off or

continuous strips. Cycle rate at up to 70 BPM, 3” Pass through height $10,295

T-375 T-1000 PF-10 Partition Table MODEL NO. DESCRIPTION RETAIL

T-375 Same specs as the T-300 with the added feature of a built in thermal

transfer printer to print on your bags. Will print Next-Bag-Out just prior to

loading. Features the Zebra printer at 203 dpi 4” x 12” print area.

$23,695

T-1000 Top of the line bagger with cycle speeds of up to 100 BPM, Can be used

with automated equipment such as vibratory bowl feeders, counters, scales and infeed conveyors injection molding equipment etc, Can connect thermal transfer

printer to this unit.

$16,950

PF-10 Partition Table-Help to keep part separated prior to loading into

machine $1,495



Bags on a roll vibrating bowls,weigh scales and parts counters etc.

UC-2400 UF-5000 MODEL NO. DESCRIPTION RETAIL

UC-2400 Vibratory bowl feeder and parts counter to be used in conjunction with

the T-1000 bagger. Great when used with fasteners, hardware

electronic components etc.

$22,950

UF-5000 Cleated compartment infeed conveyor used in conjunction with the

T-1000 bagger. This conveyor allows you to set the production speed for guaranteed production results.

$9,500

US-5000 US-7000 MODEL NO. DESCRIPTION RETAIL

US-5000 Semi-Automatic net-weigh / counting scale. Just slide any “sample” quantity in the load tray, key in your quantity, press the count button and your

finished.

$9,850

US-7000 Automatic net weigh single or dual head scale. This is an automatic

feeding solution for fasteners, injection molded parts, foods or any bulk product. $37,000

Call for stock bags on a roll pricing



BAND SEALERS-CONTINUOUS

Model PP-880I Model PP-M810 Model PP-1010I Model PP-880II Model – Light Duty RETAIL

PP-880I Horizontal-Table Top Band Sealer, right feed, Embossing- 1 line 18pt, 0-472 inches per minute, 8mm seal width, conveyor width 7”, Max conveyor load 6.6 lbs, 33” L x 17” W x 13” H, Bag size 5.9”-10.6”, weight 66 lbs, 110 volt

$1,195

PP-M810 Horizontal, Same as above with Left to Right feed and Dry Ink Coding

$1,495

PP-1010I Horizontal-Right to left feed with Dry Ink Coding, Wide 15mm seal

$2,295

PP-880II Horizontal with “Vertical Kit” –Table Top Band Sealer, right to left feed, Embossing (some assembly required) Same as above with Min 5.9” to Max 10.6” bag size.

$1,295

PP-810II Vertical- Left to Right feed with Dry Ink Coding $1,695 15mm seal width- $350 | Stainless Steel Stand- $325

Model PP-1120C PP-1120LD Dry Ink Coding-Black ink on white bag

Model – Medium Duty RETAIL

PP-1120C Stainless Steel Construction, Horizontal Continuous Band Sealer, Right Feed, Tilt Head 30 degrees, Dry Ink Coding up to 20 characters per line, sealing speed 0-394”/min, Conveyor 43” L x 8” W, Max conveyor load 16.5 lbs, Machine dimensions 43” L x 24” W x 41” H, Weight 190 lbs, 110 Volt.

$3,995

PP-1120LD Vertical band sealer with Dry Ink coder, right to Left feed, Stainless Steel Conveyor 55” L x 10” W, Single bag weight 11 lbs, Max conveyor load 33 lbs, Seal width 8mm, Speed 0-394”/min, Bag size 3.9”min-28”max, Machine Dim 57” L x 27” W x 58” H

$4,500



BANDING MACHINES (Paper and Plastic)

TZ-888 TZ-888A

Model RETAIL

TZ-888 – 10,20,30 or 40mm Tape Width Pkg Width: 40-240mm (1.5”-9.5”) Pkg Height: 5-140mm (1/4”-5.5”) Machine Dimensions: 425mm L (16.75”) x 320mm W (12.8”) x 405mm H (16”) Speed: 20-25 PPM Power: 110 volt / Weight 25kg (55 lbs) Uses 500 ft tape rolls

$4,800

TZ-888A Same as above with arch and larger package capacity. Pkg Width: 40-270mm (1.5”-10.5”) Pkg Height: 5-170mm (1/4”-6.7”)

$4,995

TZ-889 TZ-889A

Model RETAIL

TZ-889 Same specifications as TZ-888 With larger tape roll capacity 2,000 ft rolls

$5,250

TZ-889A Same specifications as TZ-888A with arch and larger package capacity (6.7” W x 10.5”H) and larger tape roll capacity 2,000 ft rolls

$5,500



PAPER and PlASTIC TAPE ROLLS

Tape Rolls RETAIL

Paper Tape White or Brown 500 ft Rolls

10mm x .15mm thick x 500 ft (1 roll) (120 rolls per case) 20mm x .15mm thick x 500 ft (1 roll) (60 “ “ “ ) 30mm x .15mm thick x 500 ft (1 roll) (40 “ “ “ ) 40mm x .15mm thick x 500 ft (1 roll) (30 “ “ “ )

$ 3.50 $ 6.50 $ 9.50 $12.50

Paper Tape White or Brown 2,000 ft Rolls

10mm x .15mm thick x 2,000 ft (1 roll) (30 rolls per case) 20mm x .15mm thick x 2,000 ft (1 roll) (15 “ “ “ ) 30mm x .15mm thick x 2,000 ft (1 roll) (10 “ “ “ ) 40mm x .15mm thick x 2,000 ft (1 roll) (7 “ “ “ )

$12.95 $25.95 $38.90 $51.85

Plastic Tape 500 ft Rolls

10mm x .12mm thick x 500 ft (1 roll) 20mm x .12mm thick x 500 ft (1 roll) 30mm x .12mm thick x 500 ft (1 roll) 40mm x .12mm thick x 500 ft (1 roll)

$ 6.50 $12.95 $19.50 $25.95

Plastic Tape 2,000 ft Rolls

10mm x .12mm thick x 2,000 ft (1 roll) 20mm x .12mm thick x 2,000 ft (1 roll) 30mm x .12mm thick x 2,000 ft (1 roll) 40mm x .12mm thick x 2,000 ft (1 roll)

$25.95 $51.85 $77.76 $99.50

Printed Tape Rolls (White Paper)

20mm x .15mm x 500 ft (1 color print) 150 roll minimum 600 “ “






Plate charge of $250.00 per color

$10.50/ea $ 8.95 $13.25 $10.85

$11.60 $ 9.50 $14.95 $11.50

$12.75 $ 9.95 $16.75 $12.50



BOPP FILM

1 .Recommended film Type: BOPP 2 side heat sealable with 4-7% shrink

*Call for film pricing

2. Recommended film sizes for:

Regular 14mm DVD – 213 mm Slimline 7mm DVD – 202 mm PS3-- 193 mm Blu-Ray – 188 mm

Formula Description Cost Per lb.

CT General purpose BOPP 2 side heat sealable-non shrink formula-food, baking etc

Call for pricing

ETS-108 Very good CD/DVD overwrap film with 5% - 7% shrink Call for pricing

Minimum order is 500 lbs Minimum order quantity for “free freight” is 1,000 lbs



Heat Sealable CO-EX OPP Films

(Call for pricing)

Description: A general purpose, heat sealable, co-extruded, biaxially oriented polypropylene film with the following features:

Two side heat sealable Broad heat seal range One side corona treated FDA compliant Outstanding clarity and superior gloss Excellent Machineability Good moisture barrier

Applications: Well suited for both horizontal and VFFS (Vertical Form Fill and Seal) machine applications such as Doboy, Illapack etc. Can be used on:

Bakery items, cookies brownies, muffins Etc.

Snack foods, crackers Etc.

General box over-wrap DVD/CD Etc.

Property Unit Typical Value Test Method

Thickness Gauge 60 70 80 100 120 140 160 200

Yield in 2/lb 51,800 44,000 38,700 31,000 25,700 22,200 19,600 15,600

Tensile MD Strength TD

Psi 17,000 30,000

ASTM D882

Elongation MD TD

% 190 70

ASTM D882

C.O.F. (Kinetic F/F)

0.3 ASTM D1894

Haze % 2-3 ASTM D1003

Gloss (45 F) G.U. 85 ASTM D2457

Shrinkage MD TD

% <5 <3

5min 266 F air oven

Heat seal Range

Untreated Treated

F 220-300 250-300

½ Sec, 30 psi

MVTR g/100in 2/ day

0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 ASTM F1249

OTR cc/100in2/ Day

145 140 130 110 95 80 60 50 ASTM D3985



CARTON SEALERS MODEL NO. MODEL DESCRIPTION RETAIL

CT-50

Our most popular

model

Semi-Automatic Uniform

Carton Sealer with Side Drive Belts. “Patented” top and bottom Tape Heads

accepts 2” Tape only

Height: Min: 5” Max: 20”

Width: Min: 4” Max: 20”

$3,650

CT-50-SS CT-50 with Stainless Steel frame

Height: Min: 5” Max: 20”

Width: Min: 4” Max: 20”

$7,650

CT-50-3

CT-50-3-SS

Same as CT-50 but with 3”

tape heads

Stainless Steel frame

Semi-Automatic uniform carton sealer with side

drive belts. Min box width 5.25” Max: 20”

Same as above

$4,950

$7,950

CT-50-26 Same as above model with

larger box capacity Height: Max 26”

Width: Max 26”

$4,650

CT-50R Semi-Automatic “Random” Carton Sealer with Side Drive Belts

Height: Min 4” Max 20”

Width: Min 4” Max 20”

$7,950

CT-50DB

Dual Side Drive Belt- 2 Lower side drive

belts and 2 upper side drive belts.

(Great for tall narrow boxes that twist or shift going through a regular tape machine)

Box Length: 6” Minimum; unlimited length Height: Min 6” Max 22”

Width: Min 4” Max 16”

$6,500

CT-55 Semi-Automatic uniform carton sealer with 2 top and 2 bottom drive belts. (4

Drive belt system) Box Length: 6” Minimum; unlimited length

Height: Min 4.5” Max 20” Width: Min 7” Max 19.5”

CT-55-3 (Same machine as above with 3” tape heads)

CT-55-LP (Low Profile) Same machine as above with offset tape heads will allow machine to process boxes as low as 2.5” high

$3,850

$4,350

$5,995

CT-55R “Random” Automatic Carton Sealer, Length: 6”-Unlimited Width: 7”-20”

Height: 2”-22.5” (Std 2” tape heads)

CT-55R-3 Same machine as above with 3” tape heads

$8,500

$8,900



MODEL NO. MODEL DESCRIPTION RETAIL

CT-55-26 Height: Max 26” Width: Max 26”

$5,463

CT-55-36 Height: Max 36”

Width: Max 36”

$6,498

CT-55-SS Stainless Steel Frame Construction $7,450

CT-55-2 BELT Dual bottom drive belt design, our lowest priced model available

Box Length: 6” Minimum; unlimited length Height: Min 4” Max 20”

Width: Min 7” Max 19.5”

CT-55-2 Belt machine with 3” tape heads

$2,995

$3,495

MODEL DESCRIPTION RETAIL

PP-554TS Uniform Semi-Automatic Carton Sealer with

Top and Side Drive Belts. 2” Tape heads Std.

Length: Min 5.9”- Unlimited

Height: Min 4.7”- Max: 19.7”

Width: Min 7.9”- Max: 19.7”

$6,383

PP-554TS-26 Height: Max 26”

Width: Max 26”

$7,188

PP-554TS-36 Height: Max 36”

Width: Max 36”

$8,338



MODEL NO. MODEL DESCRIPTION RETAIL

PP-556AU

Semi-Automatic “Random” Carton Sealer with Top and Side Drive Belts. Designed for

production runs where different size boxes will be

used. Std 2” Tape Head (3 “ Optional) Safety Guarding with magnetic locks

Length: 11.8” Min. Unlimited length

Height: Min 5.9”- Max 19.7” Width: Min 7.9”- Max 19.7”

PP-556AU-3 Same machine as above with 3” tape heads

$9,500

$9,950

PP-556AU-SS Stainless Steel Version Inquire PP-556AU-26 Height: Max 26”

Width: Max 26” $9,603

PP-556AU-36 Height: Max 36”

Width: Max 36” $10,868

CT-50 BHO

CT-50 BHO (Bottom Tape head Only!)

CT-50 BHO-3 (3” tape heads)

$3,250

$3,750


PP-558F

PP-705

Automatic Uniform Flap Closing Carton Sealer with

easy manual carton size adjustment. Top and side drive belts. Std 2” tape heads (3” optional)

Safety Guarding with magnetic locks

length: Min 7.9”- Max 21.6

Height: Min 4.7”- Max 19.7” Width: Min 7.9”- Max 19.7”

PP-558F-3 (Same machine as above with 3” tape heads

$10,194

$10,650

PP-558F-SS Stainless Steel Inquire



PP-559AF Automatic Random Flap Closing Carton Sealer

With automatic carton size adjustment cycle. Photo eye

senses box, and machine automatically adjusts to various box sizes with patented box positioning and hold down

device. Std 2” tape heads (3” optional)


length: Min 11.8”-Max 19.7

Height: Min 6.3”- Max 19.7”

Width: Min 7.9”- Max 19.7”

$19,650

PP-569SAF High Speed Fully Automatic Random carton sealer

with “Servo Drive” flap closer system and photo eyes for automatic box positioning. Light curtain

automatically adjusts upper tape head position for

increased speeds. Machine features 2 side drive belts to pull the boxes through. Belt speed of 100

ft/min or up to 20 cartons per minute

220 volt, 3 phase power

Std 2” tape heads (3” optional)


length: Min 11.8”-Max 19.7

Height: Min 6.3”- Max 19.7”

Width: Min 7.9”- Max 15.7”

$42,950

PW-566EG Uniform Semi-Automatic 4 Edge Carton Sealer with

easy manual carton size adjustment. Top and bottom

drive belts, 3” tape heads. 300 Cartons per hour.

Box Length: Min 12”-24” Max

Box Height: Min 6”- 20” Max

Box Width: Min 10”-20” Max

$29,000

PP-566AEG Fully Automatic “RANDOM” 4 Edge Carton Sealing

Machine. Production speeds of 250 cartons per hour.

Top and bottom drive belts, 3” tape heads

Box Length: 12” Min-27.5” Max

Box Height: 6” Min-20” Max

Box Width: 10” Min-20” Max

$38,000



PP-568ERT-ML

Case Erector and Bottom Sealer. Compact design with

easy adjustments for various carton sizes, HMI Touch panel Control.

60 pcs magazine storage

Production speed: 9-12 ctn/min

3 Models to choose from:

Small 5.9”-13.8” L x 4.3-11.8” W x 4.3-11.8”H

Medium:9.8-20” L x 7.8-15” W x 4.8-20” H

Large: 13.7-23.6”L x 11.8-17.7” W x 9.8-20” H

$28,500

$29,500

$30,500

PP-563BE

Semi-Automatic Pack Station

Operator loads box into machine then pusher green

button to activate bottom flap closer, when box is fully

loaded operator simply closes the minor and major top flaps and pushes box into carton sealer. Adjustable legs

from 22.5”-35”

Box Size: 250-500mm (9.8-19.6”) L x 200-400mm (7.8-15.7”) W x 100-500mm (4-19.6”) H

Air Required

$2,795

PP-563P

Pak-51

Semi-Automatic Bottom Flap Folder-Pack Station

with Automatic Pusher

Operator simply loads box into machine, pushes the foot

switch and the bottom flaps are closed and when the box is filled the operator closes the minor and major flaps

and pushes the green start button and the box is automatically pushed into the carton sealer.

Box Size: 250-500mm (4.8-20”)L x 200-400mm (7.8-

15.7”)W x 100-500mm (4-20”) H

Air Required

Same system with larger box capacity: 5.9-27.5” L

4.3-20.4” W and 4.7-20.4” High

$5,500

$6,250

Optional Items:

Infeed or Discharge Conveyor roller sections $250

Locking Casters (set of 4) $125

Leg Extension kit to raise conveyor height an additional 8” $150

Spare Tape Head 2” $795

Spare Tape Head 3” $875



CD/DVD Overwrap Machines

JT-50 Shown with TS-2002 TS-3000 Easywrapper BC- 300/Collection table

MODEL Package Type Description RETAIL

JT-50 CD and DVD Regular and Slim Line

Overwrap of CD and DVD cases, Speeds of up to 42 ppm

$21,500

JT-50 Box Wrapper

Box Wrapper Great for cosmetic, pharmaceuticals, vitamin or candy boxes. Speeds of 25 to 35 ppm

$25,000

JT-50 Box Wrapper Infeed

1.5 meter belted infeed conveyor $ 5,000

Easy Overwrapper

Multiple Boxes sizes Semi-Automatic 2 step overwrap machine, easy change over to different box sizes, Max box size 8 ¼” L x 5.9*” W x 3 1/8” H Speeds of 5 ppm

$18,500

Easy Overwrapper with double work station

Same machine as above with 2 work stations to increase speed to 10 ppm

$24,950

TS-2002 CD and DVD Regular and Slim Line

Overwrap of CD and DVD cases, Speeds of 50 ppm, Easy changeover Max pkg size: 220mm x 145mmw x 30mm H

8.6” L x 5.7” W x 1.18” H

$25,500

TS-3000-Box Wrapper (Includes infeed conveyor)

Fully automatic, Servo Drive motors, PLC controlled. Great for cosmetic, pharmaceuticals, vitamin or candy boxes.

Speeds of 35 to 40 ppm

Box width: 2 ¾” (70mm) to 8.66 (220mm) Box length: 1 3/8” (35mm) to 4 ½ (115m) Box height: ½” to 3” (75mm)

$38,950



MODEL Package Type Description RETAIL

MD-350 Multi Pack machine 3, 5

and 10 pack of CD cases

25ppm Servo drive with PLC

programming can also run multiple cosmetic or pharmaceutical boxes

$42,000

Inf-120 120 PCS Count for CD

100 PCS Count for DVD

Infeed belt with 4 rows of hoppers Air required

$7,995

HZ-Infeed Horizontal Belted infeed accumulation

conveyer $4,700

BC-300 Discharge collection table (100 piece count) $4,995

Model 800 Disc

Detector

Detects if CD is in package-will eject if not $1,800

Optional Accessories

Additional Tooling $ 795

Print film registration $3,180



CHECKWEIGHERS Mettler Toledo-Hi Speed /Checkweighers and Metal Detectors

*These are “High Speed-High Quality” units!

Beltweigh-XC Beltweight-XC Combi

Model Description Max Capacity Accuracy

+/-

Check

Speed

RETAIL

Beltweigh

XC

2 Belt check weigher, Stainless steel frame

Construction, Belt width 200mm (7.8”) 6,000g 1-2g 280ppm $Call

Beltweigh

XC


Construction, Belt width 200mm (7.8”) 6,000g 1-2g 280ppm $Call

Beltweigh

XC3


Construction, Belt width 300mm (118”) 3,500g 1-2g 100ppm $Call

Beltweigh XC-Combi

2 Belt combination metal detector and checkweighers. Belt width 200mm (7.8)

Aperture height of 150mm (5.9”)

6,000g 1-2g 280ppm $Call

Prices will vary depending on options, number of belts, software packages. Please consult factory for actual machine quote.



Check Weighers – Entry Level

CW-11 with mechanical flipper type rejector

Model Description Weight Range Accuracy

+/-

Check

Speed

RETAIL

UC-11 Check weigher #304 Stainless steel frame construction, Wipe down, 7” Touch screen , PLC, 50 program memory Max product width 8.6” (220mm) Max product length 11.8” (300mm)

10-2000g (.035oz -70oz-

4lbs)

0.5g-1.5g 65ppm $13,500

UC-15 Check weigher Max product width 15.7”(400mm) Max product length 17.7: (450mm)

50-6,000g (1.7oz-211oz-

13lbs)

+/-3g 40ppm $13,995

UC-10-S Hi-Speed Checkweigher (120 PPM)

(5-200g) (.17oz-7oz)

+/- 0.5g@100g

120ppm $15,000

UC-25 Heavy Duty Checkweigher Product Width: 400mm (15.7”) Product Length: 450mm (17.7”)

1-30kg (66lbs)

250g 18.8 oz

3 ppm $16,995

Model Description RETAIL

Rejecter Mechanical flipper type rejecter included Included

Rejecter for UC-25 Pneumatic pusher-Variable Speed $4,950

mailto:0.5g@100g



CLAM SHELL SEALERS

The Clam Shell Sealer

The Clam Shell Sealer is equipped with two heated 3/8” wide and 10mm long serrated jaws. It has two temperature settings, Low 250F/120C and High 350F/175C. Ideal for sealing poly packing cases such as clam shell and other similar types of containers. Handles remain cool during operation. The sealer can be used in the voltage range of 100-240v. Effective welding area is 4mm x 10mm Product Dimensions are 8.2” L x 2.5” W x 1” H weight 10oz. Can spot seal: OPS,PSP, PVC, and EPS

Model RETAIL

KF-772DH $99

QnPak Clam Shell Ultrasonic Sealer

The Ultrasonic Hand Held Sealer offers the fastest hand held method for sealing clam shells. Dual heat multi-purpose hand held ultrasonic heat sealer. Ideal for sealing thin clam shells or for tacking. No waiting time to preheat. Spot seals OPS, PSP, PVC, HIPS, PPF, PP, and A-PET materials.

Easy to operate. Turn the unit on. Place the package to be spot welded between the points on the handset and depress. Move to the next place to be spot-welded on the package and repeat. The clam shell is spot-welded by ultrasonic waves. Can spot seal: PSP, OPS, HIPS, PPF, PP, A-Pet and PVC

Model RETAIL

OnPak $665



CONVEYORS-POWER BELTED

PP-36B PP-72B MODEL NO. DESCRIPTION RETAIL

PP-36B

PP-36B-SS

3 ft Belted infeed conveyor x 18” wide belt, variable speed with adjustable side

guides. Stainless Steel Frame Construction, IP-55 Low pressure wash down

$2,850

$4,095

PP-72B

PP-72B-SS

6 ft Belted infeed conveyor x 18” wide belt, variable speed drive with

adjustable side guide rails.

Stainless Steel Frame Construction, IP-55 Low pressure wash down

$3,995

$5,795

PP-108B

PP-108B-SS


adjustable side guides.


$5,600

$8,550

PP-144B

PP-144B-SS


adjustable side guides. 1 HP motor


$7,200

$11,400

PP-180B

PP-180B-SS


adjustable side guides. 2 HP motor


$8,695

$12,950

PP-240B

PP-240B-SS

20 ft Belted infeed conveyor x 18” wide belt, variable speed drive with adjustable side guides. 2 HP motor


$10,995

$15,500

Standard conveyors come with white FDA food approved belting (White or Blue)

Plastic Intralox belting can be substituted as no additional cost.

Other belt lengths available up to 30 ft long-Please inquire /Adjustable height legs from 32”-42” Standard



CONVEYORS-Narrow width Plastic or SS belting

PP-108SS Shown - Stainless Steel frame construction, available with either Plastic Slat Top or Stainless Steel Conveyor Belting, Standard width is 6”

MODEL NO. DESCRIPTION RETAIL

PP-72SS 6 ft Plastic slat top or stainless steel conveyor belting, 6” wide belt, variable speed, w/adjustable side guide rails.


$3,595

$4,995

PP-108SS 9 ft Plastic slat top or stainless steel conveyor belting, 6” wide belt, variable speed, w/adjustable side guide rails.


$5,350

$7,200

PP-144SS 12 ft Plastic slat top or stainless steel conveyor belting, 6” wide belt, variable

speed, w/adjustable side guide rails. Stainless Steel Frame Construction, IP-55 Low pressure wash down

$7,150

$9,600

PP-180SS 15 ft Plastic slat top or stainless steel conveyor belting, 6” wide belt, variable

speed, w/adjustable side guide rails. Stainless Steel Frame Construction, IP-55 Low pressure wash down

$8,950

$11,950



CONVEYORS-Flighted

PP-36F Flighted PP-72F Flighted PP-72F with Friction Feeders


PP-36F

PP-36F-SS

3 ft Flighted/lugged infeed conveyor x 18” wide belt, variable speed,

w/adjustable side guide rails. Std flight lug spacing 18” Stainless Steel Frame Construction, IP-55 Low pressure wash down

$3,500

$4,995

PP-72F

PP-72F-SS

6 ft Flighted/lugged infeed conveyor x 18” wide, variable speed drive, adjustable side guides. Std flight lug spacing is 18”


$5,995

$7,800

PP-108F

PP-108F-SS

9 ft Flighted/lugged infeed conveyor x 18” wide belt, variable speed, w/adjustable side guides. Std flight lug spacing 18”


$7,995

$10,500

PP-144F

PP-144F-SS

12 ft Flighted/lugged infeed conveyor x 18” wide belt, variable speed,

w/adjustable side guides. Std flight lug spacing 18” Stainless Steel Frame Construction, IP-55 Low pressure wash down

$10,500

$12,500

CONVEYORS-Specialized

PP-72FP (Flight Paddle Conveyor) PP-72FB (Flight Bar Conveyor) MODEL NO. DESCRIPTION RETAIL

PP-72FP

PP-72FP-SS

6 ft Flighted Paddle conveyor/lugged infeed conveyor x 18” wide belt, variable speed, w/adjustable side guide rails. Std flight lug spacing 18”


$6,500

$8,500

PP-72FB

PP-72FB-SS

6 ft Flight Bar Conveyor is great for multi pack applications where

transporting 3 cans or 6 package together in a straight line and you need to feed into an automated packaging machine. 16” wide max pkg

width, variable speed drive, adjustable side guides. Std flight bar spacing is 13”


$6,995

$8,900



Conveyors-Flexible Skatewheel and Roller

PP18-16 SW (Skatewheel) PP18-16 GR Model Description RETAIL

SW – Flexible Gravity Skatewheel Conveyor

PP 14-12 SW 14” Wide Flexible Gravity Skatewheel Conveyor adjustable from 3 ft compacted to 12 ft extended, adjustable height from 28” to 44”, 175 lb capacity per linear ft, Heavy duty Red Nylon wheels, 5” Dia Locking casters.

$945

PP14-16 SW 14” wide, 4 ft compacted to 16 ft expanded $1,165 PP14-20 SW 14” wide, 5 ft compacted to 20 ft expanded $1,360 PP14-24 SW 14” wide, 6 ft compacted to 24 ft expanded $1,595 PP18-12 SW 18” wide, 3 ft compacted to 12 ft expanded $1,050 PP18-16 SW 18” wide, 4 ft compacted to 16 ft expanded $1,295 PP18-20 SW 18” wide, 5 ft compacted to 20 ft expanded $1,520 PP18-24 SW 18” wide, 6 ft compacted to 24 ft expanded $1,750 PP24-12 SW 24” wide, 3 ft compacted to 12 ft expanded $1,095 PP24-16 SW 24” wide, 4 ft compacted to 16 ft expanded $1,385 PP24-20 SW 24” wide, 5 ft compacted to 20 ft expanded $1,650 PP24-24 SW 24” wide, 6 ft compacted to 24 ft expanded $1,895

GR –Flexible Gravity Roller Conveyor

PP 18-12 GR Gravity roller conveyor. 18” wide expandable from 3 ft to 12 ft. Adjustable height from 28 ” to 44”, 150 lb capacity, 1 3/8” Dia zinc plated rollers, fully extended axle center 5” Locking casters.

$1,465

PP18-15 GR 18” wide, 4 ft compacted to 16 ft expanded $1,850


PP24-12 GR 24” wide, 3 ft compacted to 12 ft expamded $1,575



PR- Powered Roller Conveyors-Variable Speed 0-120 FPM

PP24-15 PR Powered Roller Conveyor- 24” wide, 5 ft compacted to 16 ft expanded $7,350

PP24-20 PR Powered Roller Conveyor- 24” wide, 6 ft compacted to 20 ft expanded $8,550

All conveyors F.O.B. Swaunee, GA (Package end stop included with all conveyors) Add 5% for Black Polymer skatewheels Add 9% for Steel skatewheels 7” Min Pkg length requires 3” axle centers/ 9” Pkg length requires 4” axle centers, 11.5” Pkg length requires 5.25” axle centers



CONVEYORS-GRAVITY CURVES

PP180-36 shown with PP-1622MK and PP1808-28 system PP180-24 shown with PP-1519ECMC system

90 and 180 Degree Gravity Curved Conveyors


PP180-24 180 degree curved conveyor 15” wide with 24” straight section,

¾” dia aluminum rollers on 1 ¼” centers with Stainless Steel concentric curve to keep package from falling off edge, painted

legs. Adjustable height legs from 28” to 42”

This conveyor normally sold with PP1519ECMC machines

$1,150

PP180-36 180 degree curved conveyor with 36” straight section

This conveyor is normally sold with the PP1622MK L’ Sealer and PP1808-28 Shrink tunnel set

$1,395

PP180-72 180 degree curved conveyor with 72” straight section $1,795

PP90-24 90 Degree curve with 24” straight $ 950

PP90-36 90 Degree curve with 36” straight $1,195



CONVEYORS-GRAVITY ROLLER-STRAIGHT-LIGHT DUTY


PP-24GR 24” Long x 15” wide, Straight conveyor section with new “H” style leg supports, Adjustable legs from 22”-35” (End stop

included)

$350

PP-36GR 36” Long x 15” wide straight section with adjustable legs $395

PP-72GR 72” Long x 15” wide straight section with adjustable legs $695 ¾” diameter aluminum rollers on 1 ¼” centers, will transfer very light packages

CONVEYORS-GRAVITY ROLLER-STRAIGHT-HEAVY DUTY


PP-60HD-GR 15” wide 5ft Straight section with “H” style adjustable legs, $550

PP-120HD-GR 15” wide 10ft Straight section with adjustable legs $850




PP-120HD-GR 24” wide 10ft Straight section with adjustable legs $1,050 1 3/8” dia galvanized steel rollers on 1.5” centers on all conveyors, , Spring loaded axle allows

roller to be easily removed or inserted. “H” style Leg supports are adjustable from 26” to 38”



CUTTING MACHINES Hot and Cold, Straight and Angled for Ribbon, Velcro, Labels Etc.

TBC-50 TBC-50R TBC-52RT TBC-53R Model – Velcro Cutting RETAIL

TBC-50 Velcro Cold Cut $3,495 TBC-50R Velcro Round Cut –Cold $3,595 TBC-50RT Velcro Round and Straight Cut-Cold $3,895 TBC-53R Velcro Extra Large-Cold $4,295

TBC-55HX TBC-50HX TBC-50H Model – Ribbon Cutting RETAIL

TBC-55HX Angle Cut-Hot $7,795 TBC-50H Hot Cut $4,795 TBC-50HW Hot Wire Cut-No Fray $5,995

TBC-50SH TBC-50S Model – Label Cutting RETAIL

TBC-50SH Woven Label Cutter with Sensor-Hot

$5,895 TBC-50S Printed label Cutter with Sensor-Cold

$4,995 TBC-554L Wide format material cutter up to 15.75” $9,450



DROP SEALERS / BAG OPENERS

PP-615/402 Drop Sealer and Bag Opener PP-402 Bag Opener

Model RETAIL

PP-615/402 Combination Drop Sealer and Bag Opener all on one frame! 15” wide seal bar, pneumatically operated drop sealer with photo eye activation and bag opener combination machine. 110 volt, 2 CFM at 80 PSI air required, Max jaw opening 6”, Max bag length 20” PP-615/402-SS Stainless Steel frame construction (Wipe Down)

$6,450

$10,500

PP-620/405 Same as above with wider seal jaw and larger bag opener. 20” Wide Seal Bar, Max jaw opening 8”, Max bag length 30”

$7,995

PP-615 Drop Sealer Sold Separately $5,495

PP-620 Drop Sealer Sold Separately $6,795

PP-402 Bag Opener sold separately $1,150

PP-405 Bag opener sold separately $1,450

Air Expeller-Compression Plate $995.00

Incline Conveyor-18” W x 4 ft long-Paddle style belt helps move product up conveyor.

$3,495

PP-36LS 36” Diameter Lazy Susan turntable PP-48LS 48” Diameter Lazy Susan Turntable

$1,395 $1,895



FILLING EQUIPMENT- AUGER FILLERS

AUGER FILLERS

AG95-S Standalone Auger Filler AG95-L With screw conveyor Model RETAIL

AG-95-S Standalone Auger Filler with 7” touch screen, Omron controller, servo control, flow boosting agitator. Fill range: 10-1000g, (1.7-35oz) 50 cycles per minute, accuracy +/- 0.3-1%

$15,250

AG135-S Same unit as above with larger capacity Fill range: 100-2000g (3.5-70oz)

$17,985

AG50-L Auger filler for powders (filler to integrate) Fill range: 1-50g ( 1-17.5oz)

$ 4,465

AG95-L Auger filler for powders, (filler to integrate) Fill range: 10-1000g (1.7-35oz)

$11,950

AG135-L Auger filler for powders (filler to integrate) Fill range: 100-2000g (3.5-70oz)

$15,250



FILLING EQUIPMENT-PISTON FILLERS

LP-Series Liquid Piston Fillers

The LP Series is a volumetric piston filler that is “Wash Down” design and able to fill products such as liquid soaps, hair gel, jams, BBQ Sauce etc. Filling controlled by timer or

footswitch, stepless volume adjustment, Stainless Steel Construction-No electrical required!

Model RETAIL

LP-60 Stainless Steel construction, Hopper volume 10 litre (2.5 gal), air required, Filling speed 30-40 PPM Accuracy +/- 2%, fill range 3-60ml (.1-2oz)

$3,450

LP-120 Same as above with fill range of 10-120ml (.3-4oz) $3,650

LP-250 Same as above with fill range of 20-250ml (.6-8oz) $3,995

LP-500 Same as above with fill range of 50-500ml (1.5-16oz) $4,895

Hopper Agitator with frequency regulator $2,150 Hopper with heater package and temperature controller to heat product up to a more liquid consistency for easier filling and increased fill speeds

$1,800

Hopper level sensor $ 995 Lid press-Heavy stainless steel plate forces non flowing product down hopper

$ 225



FRICTION FEEDERS/ BATCH COUNTING/COLLATING SYSTEMS

V-1000 V-2000 V-710BC

Model RETAIL

V-1000 Min: 2.5” x 3” Max: 12” x 12” Continuous feeder for ink jet printing, tabbing and labeling.

$3,500

V-2000 Min: 2.5” x 3” Max: 20” W x 18”L Continuous feeder for ink jet printing, tabbing and labeling

$5,900

V-710BC One shot feed and batch counting at 100 cycles per minute. Min: 3.75” x 3.75” Max: 12” x 12”

$6,500

ST-1250EX Pneumatic ST-1250 Retractable

Model RETAIL

ST-1250EX Pneumatic Call for Pricing

ST-1250 Retractable Dropper Call for Pricing



Reciprocating Placer Rotary Placer

Tray Denester

Model RETAIL

Reciprocating Placer- Min: 1.5” x 1.5” Max: 10” x 10” 65 cycles per minute

Call for Pricing

Rotary Placer Min: 1.5” x 1.5” Max: 6” x 6” Up to 400 cycles per minute Call for Pricing

Tray Denester- Min: 1.5” x 1.5” Max: 20” W x 10”H Up to 45 cycles per minute

Call for Pricing



Horizontal FFS Flow Wrapping Machines Low cost – Entry Level. Great for wrapping cookies, muffins, candy bars, biscuits, brownies,

etc.

Model PM-C250 Shown


PM-C250 Great entry level horizontal FFS Flow Wrapping Machine with mechanical drive and touch screen menu with auto diagnostics with error display, product counter, 7 ft flighted infeed conveyor. One step adjustment of bag length.

Speeds from 40 to 100ppm

Seal jaw width: 4.3” (110mm) Bag length: 2.5” (65mm) to 11” (280mm) Bag width: 1.25” (30mm) to 4.2” (110mm) Max film width: 3.5”(90mm) to 9.8” (250mm) Max prod height: 1.5” (40mm)

$19,950

PM-C250 IVC Inverted

Inverted film feed design where the film come up from the bottom and the fin seal is on top. Great design for feeding small items or item that are difficult to transport or transfer on a flighted infeed conveyor. The flight pusher will push the product onto the film and then the film carries the product into the seal jaw.

$23,000

PM-C350

PM-C350H PM-C350HL

Same machine as C250 described above, but will accommodate larger package sizes.

Seal jaw width: 7” (178mm) Bag length: 2.5” (65mm) to 7.25” (190mm) Bag width: 2” (50mm)to 6.25” (160mm) Max film width: 5” (130mm) to 13.75” (350mm) Max prod height: 1.5” (40mm) Max Pkg Height: 2.5” /Bag Length 4.25-8.5” Max Pkg Height: 2.5” / Bag Length 5.75-12.75”

$20,950

$22,500 $23,500



PM-C350-IVC Inverted Inverted film feed design where the film come up from the bottom and the fin seal is on top. Great design for

feeding small items or item that are difficult to

transport or transfer on a flighted infeed conveyor. The flight pusher will push the product onto the film

and then the film carries the product into the seal jaw

$24,500

PM-C450 Same machine as C350 described above, but will

accommodate larger package sizes.

Seal jaw width: 9” (229mm)

Bag length: 5” (130mm) to 17.5” (450mm) Bag width: 2.2” (60mm) to 7.8” (200mm)

Max film width: 6” (150mm) to 17.7” (450mm)

Max prod height: 3” (80mm)

$24,500

PM-C450-IVC Inverted Inverted film feed design where the film come up from the bottom and the fin seal is on top. Great design for

feeding small items or item that are difficult to transport or transfer on a flighted infeed conveyor.

The flight pusher will push the product onto the film

and then the film carries the product into the seal jaw

$26,500

PM-450R Box motion (reciprocating seal head) designed for

taller package sizes. Will accommodate packages up to 100mm (4” tall).

Seal Jaw width: 9”

Bag length: 4.75 (120mm)-17.75 (450mm) Bag Width: 1.6” (40mm) – 7.8” (200mm)

Max Pkg Height: 4” (100mm) Max Film Width: 17.7” (450mm)

Machine Speed: 20-60 PPM

$35,500

PM-C600H Same machine as C450 described above, but will

accommodate larger package sizes.

Seal jaw width: 11” (279mm)

Bag length: 5” (130mm) to 17.5” (450mm) Bag width: 2.5” (65mm) to 10.5” (275mm)

Max film width: 6” (150mm) to 23.5” (600mm) Max prod height: 4” (100mm)

Machine Speed: 20-75 PPM

$28,950



Optional Accessories RETAIL

Stainless steel frame construction $ 4,600

Photo electric eye for printed film Included

All color photo sensor $ 595

Adjustable film forming plow $ 895

Dual crimp jaws $ 695

Powered Discharge Wheel on Exit Conveyor-Helps to Separate Products $ 950

Seal jaw sensor-keeps jaws from hitting product $ 1,050

Gas flush-Control valves and pipes $ 895

Gusseted bag device $ 850

Plastic product carriers $ 650

Single head label applicator $ 8,875

Dual head label applicator $16,500

Date Code-Solid Ink Roller $ 2,150

Video Jet 6220 Thermal Transfer Printer (32mmx34mm or 1.26”x1.34” print area) $ 5,850

Extended Infeed Conveyor-Std length 6.5ft (2 meters) Add 1 meter (3ft) for a total length of 9.5ft (3 meter) $ 1,295



Horizontal FFS Flow Wrapping Machines Entry-level mechanical drive machines. Better quality with more standard features.

Great for wrapping cookies, brownies, muffins, candy bars, biscuits, etc.

Model JE-535 Shown Model Description RETAIL

JE-535 Horizontal mechanical BOPP wrapper with PLC controller, Omron temp controls, powder coated frame, timing belt transmission top brush belt, 7ft flighted infeed conveyor.

Speeds of 20 to 150ppm

Bag length: 2.4” (60mm) to 13 ¾” (350mm) Max film width: 13 ¾” (350mm) Max prod width: 5.7” (145mm) Max prod height: 2.75” (70mm)

$24,850

JE-547 Same as above description with larger capacity

Bag length: 3.9” (100mm) to 17 ¾” (450mm) Max film width: 18.5” (470mm) Max prod width: 7.5” (190mm) Max prod height: 3.9” (100mm)

$27,125

JE-561 Same machine as described above with larger capacity.


Bag length: 5.9” (150mm) to 19.6” (500mm) Max film width: 24” (610mm) Max prod width: 10.6” (270mm) Max prod height: 3.9” (100mm)

$29,625



Horizontal FFS Flow Wrapping Machines

High Quality Mechanical Drive Horizontal FFS Flow Wrapping Machine

* Model M-5247 Shown


M-5247 Horizontal FFS Flow wrap machines with mechanical drive. Mitsubishi PLC control, Omron temperature controls, powder coat finish, motorized bag length adjustment. Overload protection on end seal jaw with automatic disengage variable speed inverter, bag counter display, adjustable product guide rails, top hold down belt, discharge brush to stabilize product on discharge transfer 7ft flighted infeed conveyor.

Speed from 30 to 150ppm

Bag length: 5” (130mm) to 15.75” (400mm) Max film width: 18.5” (470mm) Max prod width: 7.5” (190mm) Max prod height: 2.75” (70mm)

$30,750

M-5261 Same machine as described above with larger capacity


Bag length: 5.1” (130mm) to 17.7” (450mm) Max film width: 24” (610mm) Max prod width: 10.4” (265mm) Max prod height: 3.9” (100mm)

$35,450

BC-300



Horizontal FFS Wrapping Machines

High Speed “Servo Drive” Horizontal Flow Wrap machines *Model S-5647 Shown


S-5547 Horizontal single (1) axis servo motor drive flow wrapper with Siemens PLC controller, 5.7” color touch screen with 50 program memory, photo eye for printed film, adjustable film former, 7.5ft (2.3m) flighted infeed conveyor, European “CE” safety standard. Overload protection on end seal with automatic jaw disengage function. Speeds of 30 to 250ppm Bag length: 5.12” (130mm) to 15.7” (400mm) Max prod width: 7.5” (190mm)

Max film: 18.5” (470mm) Max prod height: 2.75” (70mm)

$38,950

S-5547-IV Same machine as above with inverted film feed (film feeds from bottom roll for better product transfer

$61,850

S-5561 Same as above with larger capacity, (1) axis servo drive

Speeds of 20-170ppm Bag length: 5.11” (130mm) to 17.71” (450mm)

Max film width: 24” (610)mm Max prod width: 10.4” (265mm)

Max prod height: 2.75” (70mm)

$44,175

S-5647 Horizontal (3) axis servo motor drive flow wrapper with Siemens PLC control module, 10.4” color touch screen with 100 program memory, 3 axis servo motor for infeed, fin seal and end seal. Over-load protection for end seal with automatic disengage, photo eye for print registration.

Speeds of 30 to 250ppm

Bag length: 5.12” (130mm) to 17.71” (450mm)

Max film width: 24” (610mm) Max prod width: 10.4” (265mm)


$50,900

S-5647 (4) axis servo-same as above with 4 servo motors $54,675

S-5661 Same as above 4 axis servo drive with larger capacity.

Prod speeds of 20 to 170ppm Bag length: 5.11” (130mm) to 17.71” (450mm)

Max film width: 24” (610mm) Max prod width: 10.4” (265mm)


$56,500

S-5747-SB3 5 Axis servo drive with “Allen Bradley” PLC, 10.5” “AB” color touch screen with 100 program memory, Attachless Smart Belt Infeed, no product/no cycle, Dual film reel holders, speeds of 20-160 PPM

Call for pricing




Model S-5547-SH Shown

High speed flow wrappers for “shrink film” application. (Choose from static lap seal, Trim seal or fin seal)


S-5547-SH Single axis servo motor drive flow wrapper for shrink film. Uses vacuum belt drive, Siemens PLC controller with 50 program memory, 5.7” touch screen panel for easy set up and change over, overload protection with automatic disengage of end seal jaws.


Bag length: 6” (150mm) to 15 ¾” (400mm) Max film width: 18.5” (470mm) Max prod width: 7.5” (190mm) Max prod height: 2 ¾” (70mm)

$51,500

S-5561-SH Same machine as described above with larger capacity

Production speed: 30 to 90ppm

Bag length: 6.69” (170mm) to 17.71” (450mm) Max film width: 24” (610mm) Max prod width: 10.43” (265mm) Max prod height: 2 ¾” (70mm)

$56,500

* Higher package heights available upon request*



Horizontal FFS Flow Wrapping Machines Options

DESCRIPTION RETAIL

Stainless Steel frame construction –M Series $6,250

Stainless Steel frame construction- S Series $8,495

Plastic carrier blocks $ 795

Date coder-Pneumatic drive-Time delay-Carbon ribbon coder, 2 position X or Y Print position Needs to be changed when you change machine speed.

$2,800

Date coder-Stepper motor drive–Encoder positioning-Carbon ribbon coder, prints in machine direction only, Alarm when ribbon is finished.

$3,950

Date coder-Stepper motor drive-Encoder positioning-Hot ink Coder, 2 position print X or Y direction,

$3,950

Center seal pre-heater (for better sealing at high speed) $2,300

End seal euro slot hole punch $1,295

Gas flush device (control valve & pipes) $1,675

Auto-Labeling unit-Will apply pressure sensitive label to top of package $10,850

Additional film roll holder $1,500

End seal gusset device $2,495

Adjustable film forming box $2,495

Fixed forming Box $ 395

Hopper feed-Single tower, Manual loading of product into hopper, flight lugs picks product from hopper and places onto infeed conveyor

$3,000

Dual/Twin end sealing jaws to reach speeds of 250 PPM $2,000

Triple Sealing Jaws $3,950

Top chain transfer conveyor on end seal area $1,895

Right to left (mirror image) machine configuration $1,800

Top chain transfer conveyor on 2 meter infeed with multi belt transfer between in-feed and bag former (available on servo models only)

$16,500

No product / no cycle – available on 3 & 4 axis servo machines only $6,500

Double pitch in-feed conveyor with removable pushers for wrapping packages that have a large length range ( 3 axis servo machine only) Mechanical and 1 axis servo machines require gear change

$1,995

$1,395

No product – Automatic stop/Automatic re-start with product on, ( available on “M” series machines only)

$1,200

480 volt power $ 695

Add Servo motor drive on “S” series machines (ea) $4,600

Automatic film splicer with dual roll holder models $10,950

Extended Infeed Conveyors- Std length 2.3 meters/7 FT Add 1 meter – 3 ft/Total length of 10 ft Add 2 meters – 6 ft/Total length of 13 ft Add 3 meters – 9 ft/Total length of 16 ft

$2,550 $5,100 $7,650




H-130 Series Horizontal FFS (Form, Fill and Seal)

The model H-130 is a horizontal form fill and seal machine designed for cosmetics, chemical, snacks, candy, granular, liquid or powder products in a 3-side or 4-side seal bag. It can make a bag up to 140mm W (5.5”) x 180mm L (7”)


H-303 Horizontal FFS machine for cosmetics, granular, liquid or powder products Servo motor film drive system. 1 fill station 7” Omron touch screen HMI. Mitsubishi PLC, photo eye, auto diagnostics, Quick change 3 side or 4 sided seal, stand up pouch with zipper, can use auger filler to fill bag. Production speeds of 40-65 BPM Fill range: 160ML (up to 3.38 oz) Bag length: 2.95” (75mm)-7” (180mm) Bag width: 2.4” (60mm)- 5.5” (140mm)

$49,500

H-503 Same machine as above with larger bag size and fill volume, 2 fill stations. Production speed 40-65 BPM Fill Range: 400ml (13.5oz) Bag Length: 2.85” (75mm) – 8.85” (225mm) Bag Width: 2.56” (65mm) – 7” (180mm)

$63,500

H-505 Higher speed with smaller fill volume- 2 filling stations with the use of dual head fillers with production speeds of 80-130 BPM Fill volume: 60ml (2 oz)

$89,950

H-511 Stand up pouch model with Zipper and dual filling stations. 50 BPM

$134,000



Optional Accessories

Description RETAIL

Stainless steel frame construction $6,000

Hot stamp printer (3 lines of type 1.3” w) $1,600

Additional film forming collar $1,995

Exit conveyor with incline and food grade mesh belting $2,550

Gas flush device $1,650

Side gusset option on bag $2,085

Euro slot hole punch $2,195

“V” shaped tear notch for easy bag opening $1,695

Dimple plate structure on metal $1,575

AUGER-Options RETAIL

Vibration device during filling to avoid product accumulation $1,450 Powder dust extractor $3,950



“I” BAR SEALERS & TABLE TOP “L” SEALERS

Deluxe ”I” Bar Impulse Sealer with seal timer Unit includes heat gun and starter roll of film

Model RETAIL

PP-13DS Deluxe 13” seal bar with impulse light that goes out when finished $360 PP-18DS Deluxe 18” seal bar with impulse light that goes out when finished $380 PP-24DS Deluxe 24” seal bar with impulse light that goes out when finished $390 PP-32DS Deluxe 32” seal bar with impulse light that goes out when finished $425 PP-40DS Deluxe 40” seal bar with impulse light that goes out when finished $465

” Impulse Sealer includes heat gun, seal pad and film

PP-24DWS Deluxe “Magic Wand” Impulse Sealer Includes heat gun, seal pad and starter film roll

Model RETAIL

PP-24DWS 24” long seal bar $610 PP-32DWS 32” long seal bar $650 PP-40DWS 40” long seal bar $675

PP-450HL Includes film roll stand with perf wheels

Model RETAIL

PP-300HL 12” x 18” L’ Sealer w/film stand $ 795 PP-450HL 18” x 18” L’ Sealer w/film stand $ 895 PP-600HL 24” x 32” L’ Sealer w/film stand $1,250 Heat Gun sold separately $ 65

* Heat gun or table top shrink tunnel sold separately



IMPULSE SEALERS

PP-200H PP-200HC with cutter

Hand Type Poly Impulse Sealers RETAIL

Model Size

PP-200H 8” $70

*PP-200HC 8” $135

Spare parts kit-200 $16

PP-300H 12” $105

*PP-300HC 12” $165


PP-400H 16” $135

PP-400HC 16” $195


PP-500H 20” $175

PP-500HC 20” $225


* HC Model includes cutting knife.*Also available with 5mm wide seal at additional cost*Spare parts kit includes 2 sealing elements, 2 Teflon Covers, 2 Teflon Adhesives

E1500S AVP-20 Model RETAIL

E1000S 10” Pneumatic Impulse Sealer, ¼” seal, Clean room compatible, LCD display, pressure gauge, No Pinch safety jaw, Electronic foot switch, 110v (Air required)

E 1500 15” Seal length E 2000 20” Seal length E 2500 25” Seal length E 3000 30” Seal length E 3500 35” Seal length

$1,120

$1,165 $1,195 $1,295 $1,345 $1,550

AVP-20 Foot pedal operated pneumatic impulse sealer, 20” seal length. (Air required)

$1,328



IMPULSE AND CONSTANT HEAT SEALERS

PP-450F PP-450FC PP-400THS Foot Pedal poly Sealer Foot Sealer w/Cutting Knife Constant Heat

Model RETAIL

PP-300F 12” wide seal jaw, 1/8” (2mm) $295

PP-300THS Constant Heat $425 Spare parts kit-300 $ 25 PP-450F 18” wide seal jaw 1/8” (2mm) $342

PP-450FC with cutting knife $375

PP-400THS 16” Constant Heat $475 Spare parts kit-450 $ 28 PP-600F 24” wide seal Jaw $395

PP-600FC with cutting knife $425 Spare parts kit-600 $ 33 PP-750F 30” wide seal jaw $550 Spare parts kit-750 $ 38 PP-900F 35” wide seal jaw $750 *Also available with 5mm wide seal at additional cost

Spare Parts Kit Includes: 2 elements, 1 ft long roll of Teflon and 2 Teflon adhesives



INDUCTION SEALERS

Model AF-500W Model CS-501

Model DESCRIPTION RETAIL

AF-500W Semi-Automatic Induction Cap Sealer suitable for non-metal container such as glass, plastic bottles ABS, PE, PET, PP, PS, PVC. Cap size 15-120mm (500W power) 220 V, footswitch operated.

$2,995

CS-501 Semi-Automatic Capping and Foil Sealing Machines. Will screw on cap and foil seal, For non-metal containers such as glass, or plastic bottles, ABS, PE, PET, PP, PS, PVC. Cap range from 22-40mm (1000W) 220V

$5,335

Fully Automatic AF-2000W AFC-2000W


AF-2000W Fully Automatic Induction sealer with stand only- (for customers who already have conveyor) water cooling system, 2000W power 220V 12A Cap Dia 10-55mm,

$8,350

AF-3000W Fully Automatic Induction sealer with stand only- (for customers who already have conveyor) water cooling system, 3000W power 220V 15A Cap Dia 20-120mm,

$9,650

AFC-2000W Fully Automatic Induction sealer with Conveyor. Water cooling system, 2000W power 220V 12A Cap Dia 10-55mm, Belt Speed 20-60m/min, Metal belt conveyor

$11,600

AFC-3000W Same unit as above with 3000W power,

Cap size 20-120mm, 220 v 15A $12,950



Ink Jet Systems

U2 Printer with HP Technology, uses 42 cc Ink Cartridges, can print on boxes or structured films. Will print 4 lines at 1/8” each or 2 lines at ¼” each or 1 line at ½”


U2 Ink Jet Printer $1,695

NP4 Ink Cartridge $129/ea

U2 Mobile Hand Held Ink Jet Printer-The world’s most compact mobile printer, lightweight only 2.2 lbs, 7 Hour battery life, remote keypad with 2.8” color display.


U2 Mobile Semi-Automatic Induction Cap Sealer suitable for non-metal $1,995

U2 Mobile Semi-Automatic Capping and Foil Sealing Machines. Will screw $1,995



L’SEALERS – “ECONOMY” VERSION –FULLY AUTOMATIC SOLD WITH TUNNEL

PP-5600 “Economy” System Model Seal Size

L x W x H Description RETAIL

Economy PP-5600

Combo (L’ Sealer and

Tunnel)

19”x 16”x 4” Fixed belt speed 65 FPM 20 PPM

“Economy” Combination Fully Automatic L’ Sealer and Tunnel sold as a set, Delta PLC, Delta 5” Color Touch Screen with 12 program memory, Speeds to 20 PPM, Fixed belt speed drive- 0-65 FPM, Manual motorized adjustments of inverting head and infeed conveyor position, Motorized scrap windup with alarm, pinwheel hole punch, Hot knife seal bar, Casters Includes separate shrink tunnel: Model PP1808-28 28” L x 18” W x 8” H opening.

$23,995

Stainless Steel

Frame Construction

Made for USDA Approval-Wipe Down Only

$39,950

PP-5600E

Economy L’ Sealer Sold Separately

Seal area 25” L x 19” W x 4”

PP-5600E “Economy” Fully automatic L’ Sealer with fixed belt speed, maximum speed of 20 PPM.

$19,950



Fully Automatic L’ Sealer with Attached Tunnel

PP-5300 Combo PP-5600 Combo “APA” Automatic Product Adjustment Now with Vertical Seal Head Design

Model Seal Size L x W x H

Description RETAIL

Standard PP-5300 Combo

19” x 16” x 6” Variable speed drive

0-110 FPM,

40 PPM

“Combination Fully Automatic L’ Sealer and tunnel built on same frame,” Delta PLC, Delta 7” Color Touch Screen with 12 program memory, Speeds to 40 PPM, Variable speed drive- 0 to 95 FPM, product staging, , “APA”-Machine will automatically adjust infeed conveyor and inverting triangle, jam alarm, Motorized scrap windup with alarm, pinwheel hole punch, Hot knife seal bar, Locking casters

$32,500

PP5300CS

Combo-SS

Stainless Steel Same machine as above in stainless steel. Mfg for USDA approval Wipe down only

$57,550

PP5600CS Combo 25” x 19” x 7” Same unit as above with large seal area 25” L x 19”W

$34,500

PP5600CS Combo-S.S

Stainless Steel Same machine as above in stainless steel. Mfg for USDA approval Wipe down only

$56,925



L’SEALERS - FULLY AUTOMATIC cont’d

PP-5600 *Vertical Seal Head Design with Center Seal” and PP-36F Flighted infeed shown

Model Seal Size

L x W x H

Description RETAIL

PP-5600CS 25” x 19” x 7” Delta PLC, Delta 7” color touch screen with 12 program memory, “APA” Automatic product adjustment-inverting head and infeed conveyor will automatically adjust to package size, Variable speed drive- 0 to 110 FPM, APC-“Automatic Product Clearing”, Speeds to 40 PPM, Self diagnostics, motorized scrap windup with alarm, product staging, multi pack option, pinwheel hole punch, hot knife seal bar, locking casters

$26,500

PP-5600CS-SS Stainless Steel Same machine as above in stainless steel. Wipe down only, Mfg. for USDA Approval

$43,680



L’SEALERS - FULLY AUTOMATIC cont’d

PP-9070CS Shown

Now with Vertical Seal Head Design

Model Seal Size L x W x H

Description RETAIL

PP9070CS 34” x 24”x 10” “APA” Automatic product adjustment-Infeed

conveyor and inverting triangle will automatically adjust to package size from one touch control

panel.

Speeds of 30 to 40 PPM, 4” minimum package length.

Designed for use with polyolefin or polyethylene films. Maximum package height 8”.

Delta 7”color touch screen with 12 Program

memory.

Center Seal Standard.

$32,500

PP9070CS-SS Stainless Steel Same machine as above in stainless steel

Mfg for USDA approval-wipe down only

Inquire

For Pricing on shrink tunnels to match these systems, please refer to the tunnel price sheets.



Options for Automatic L’ Sealers RETAIL

Closing Conveyor $1,950

Print Film Registration $1,875

Left to Right Product Flow $1,050

Export Crating $ 500

Non-standard voltage $1,200

Pneumatic Hole Punch Single Hole 3/16” $1,295

Dual Pneumatic Hole Punch-Two 3/16” Diameter Holes $1,895

PP-36B 3 ft Belted infeed conveyor, variable speed, adjustable side guides $2,850

PP-72B 6 ft Belted infeed conveyor, variable speed, adjustable side guides $3,800

PP-36F 3 ft Flighted infeed conveyor, variable speed, adjustable side guides $3,500

PP-72F 6 ft Flighted infeed conveyor, variable speed, adjustable side guides $5,995

6’ Flighted “Paddle” style infeed conveyor with 3” to 6” wide paddle widths available, this conveyor is great for pushing multi product down the conveyor at one time

$6,500

Poly cord belt infeed conveyor for easy cleaning $2,500

Pneumatic product hold down for light weight products $1,995

Pneumatic air expeller-Helps evacuate air from bag prior to sealing $2,150



L’SEALERS – SEMI-AUTOMATIC

PP-1519L Shown

ECONOMY SERIES: L’ Sealer with “Band Seal Technology” (15”W x 19”L) L’ Seal area. Comes with Pin Wheel Hole Punch, Legs with casters. All units are 110 volt. Models PP1519L and PP1519LM available in a Table Top Version, deduct $100.00 for leg kit.

Model RETAIL

PP-1519L – L’ Sealer Only $2,195 PP-1519LM (Magnet Hold Down) $2,795 PP-1519LMC (Magnet Hold Down and Power Discharge Conveyor) $3,595

PP-1622MK PP-1622MKA-V-PI Standard Series: Semi-Automatic L’ Sealer with magnet clamping, powered takeaway conveyor, cylinder arm return, “Micro Knife” seal system standard, stainless steel compensator assembly, automatic cycle timing, pin perf, Stainless steel film clamps, casters. “Micro Knife” *(MK) available on PP-1622 and PP-2028 models only. (Wire sealers use laminate strips under seal wire)

Model Seal Dimensions Power Volts Amps

Phase RETAIL

16”W x 22”L 220 15 1 PP1622-W or MK Wire or Micro Knife $4,900 PP1622-A Air operated-Pivots from back-Wire or Micro Knife $6,495 PP1622-MKA-V Micro knife-Air Operated- Vertical Seal Head with 8”

opening moves straight up and down. $7,695

PP1622MKA-V-PI Micro knife-Air Operated- Vertical Seal Head with 8” opening-Powered film unwind and Adjustable film inverting head-Seal head moves straight up and down.

$9,795

PP1622-HK Hot Knife-Constant heat with independent digital temperature controls.

$6,500

PP1622-MK-SS # 304 Stainless Steel frame construction-Wipe down $8,950



L’SEALERS – SEMI-AUTOMATIC cont’d.

PP-2028MK Shown

Model Seal Dimensions Power Volts

Amps Phase RETAIL

20”W x 28”L 220 28 1

PP-2028W or MK Wire or Micro Knife $6,500

PP-2028A Air Operated-Pivots from back -Wire or Micro Knife $7,900

PP-2028A-V Air Operated-Vertical seal head with 10” opening, seal head move straight up and down, Micro knife or wire

$8,800

PP-2028HK Hot Knife- Constant heat with independent digital temperature controls.

$7,900

PP-2028-SS #304 Stainless Steel frame construction-wipe down $10,900

Model Seal Dimensions Power Volts

Amps Phase RETAIL

20”W X 40”L 220 30 1

PP-2040W Wire Only $7,500

PP-2040A Air Operated-Std pivots from back $8,700

PP-2040A-V Air Operated-Vertical seal head-Moves straight up and down $9,900

PP-2040HK Hot Knife- Constant heat with independent digital temperature controls.

$8,900

PP-3040W Shown

Model Seal Dimensions Power Volts Amps Phase RETAIL 30” W x 40” L 220 30 1


PP-3040W-A Wire- Air Operated-Std pivots from back $10,500

PP-3040W-A-V Wire- Air Operated-Vertical seal head with 12” opening $12,750

PP-3040HK Hot Knife $10,950

PP-3040-SS # 304 Stainless Steel-Wipe down Inquire


40” W x 50“ L 220 35 1





PP-48ST PP-76ST PP-77ST (Larger Seal Area) “All-in-One” Sealer/Shrink Chamber: Compact L” Sealer and Hooded Shrink Chamber in one complete unit. Machine comes with “Band Seal Technology,” Dual Magnetic Hold Down for seal and shrink Cycle, Pinwheel Hole Punch, and locking Casters. PP-48ST add $295.00 for 220 volt

MODEL SEAL DIMENSIONS POWER VOLTS AMPS PHASE RETAIL

PP-48ST 12” W x 18.5” L 110/220 20 / 10 1 $2,650 PP-76ST 16” W x 22” L 220 25 1 $3,575 PP-76STC Power Discharge Conveyor 220 30 1 $4,995 PP-76ST-SS Stainless Steel 220 25 1 $4,575 PP-77ST 20” W x 30” L 220 30 1 $5,500

*Shown with optional PP180-24 curved conveyor

PP-1519EC Series Economy Combination Machine With “Micro Knife Technology”

Comes complete with console leg kit, casters, pin wheel hole punch and 8ft power cord

Model Size:

Sealer Size:

Tunnel RETAIL

PP-1519EC (Economy Combo) 15”W X 19”L 20”L X 16”W X 6”H $4,395

PP-1519EC-SS (Stainless Steel) “ “ $6,850

PP-1519ECM (Economy Combo with Magnet Hold Down)

“ “ $4,995

PP-1519ECM-SS (Stainless Steel) “ “ $7,750

PP-1519ECMC (Economy Combo with Magnet Hold Down and Powered Discharge Conveyor)

“ “ $5,995

PP-1519ECMC-SS (Stainless Steel) wipe down. “ $9,250 PP180-24 Gravity roller curved conveyor 180 degree curved conveyor with 24” straight

section $1,195

*Machines available in (110 volt-20 amp) or (220 volt-10 amp) service.* Add $295.00 for 220-volt machine / * Add $275.00 for 8” tunnel height* 110-volt unit comes with

power cord and plug. 220 volt units comes with power cord “NO Plug”




L’Sealer and Tunnel Sold as a Set

PP-1622MK & PP1808-28 *Shown with optional PP180-36 gravity curvedconveyor

L’ Sealer comes with dual magnets, power discharge conveyor, casters and pin wheel hole punch. Tunnel has digital temperature control, variable air velocity, casters and leveling pads

Model RETAIL

PP-1622MK Sealer and PP1808-28 Tunnel sold as set $7,995

Optional: PP180-36 180 degree Curved Conveyor with 36” straight section $1,395

PP1622MK-Combo Shown *Shown with optional PP180-36 gravity curvedconveyor

Combo unit ships complete with dual magnet hold down, power discharge conveyor, casters, pin wheel hole punch. (L’ Sealer moves side to side and tunnel raises and lowers with crank handle)

Model RETAIL

L’ Sealer and tunnel built on common frame. L’ Sealer adjusts from side to side while tunnel adjusts up and down. One power source 220V, 1 phase, 45 amps.

PP1622MK-Combo (Micro Knife) $ 8,995

PP1622MK-Combo-SS #304 Stainless Steel-Wipe down. $14,950

PP1622HK-Combo (Hot Knife) $10,450

PP1622MKA-Combo (Micro Knife-Air operated) Air Operated Dual Push Button Operation with Automatic Cycle Timing

$ 9,975

PP1622MKA-Combo-SS “Air Operated Seal Head”, #304 Stainless Steel-Wipe down.

$15,950

Optional: PP180-36 180 degree Curved Conveyor with 36” straight section $ 1,395



L’SEALER ACCESSORIES

Description RETAIL

Adjustable Film Inverting Head PP1622 $1,050

“ PP2028 $1,350

“ PP3040 $1,850

Powered Film Unwind PP1622 20” Film $1,050

“ PP2028 25” Film $1,500

“ PP3040 35” Film $2,000

Product tray-Stainless steel PP1622 $ 400

“ PP2028 $ 535

“ PP3040 $ 675

Film Rack for PP1622 $ 400

“ PP2028 $ 475

“ PP3040 $ 650

Electric Hole punch-3/16” Diameter hole $1,395

Pinwheel Hole punch $ 195

Non-Standard Voltage For U.S $ 995

Left hand sealers $1,050

Paint-Custom color $ 550


PVC Teflon Diaper Seal Wire Covers $ 350

Remote/Portable Film Scrap Take Up Wheel $ 795



LABEL DISPENSERS

U-25 U-45 U-60 Model RETAIL

U-25 NEW, LOW COST Label Dispenser! Power advance for roll labels to 2.5” width. Tension guide is standard for thin labels. Optional reverse switch available for labels under .5” length/width. With Photo Eye

$475

U-45 Power advance for one-up computer forms, or printed labels in rolls 3/8” to 4-1/2” wide at 6” per second speed. High Speed version 11” per second speed for ANY length label! With Photo Eye

$675

U-60” High Speed power advance for larger labels in rolls up to 6” wide, at 9” per second. With Photo Eye

$735

Bottle- Matic D5 Model MSRP

Bottle-Matic – 16” width Cylinder labeling machine. Label any cylindrical object fast and accurately FRONT AND BACK from .5” to 9” dia.* at speeds of 950 Pcs. Per hour! Bottle-Matic is the perfect machine for labeling your cylindrical objects! It can wrap your bottles, cans, tubes, and jars by simply pressing the foot-switch! We can even do tapered objects without customizing!

$1,850

D-5 power advance for presort labels or printed roll labels (butt cut or die cut). For rolls up to 5-1/2” diameter.

$495



LABEL MACHINES-AUTOMATIC

ELF-20 Table Top ELF-50 Table Top Top Labeler Wrap Around Labeler


ELF-20 Table top- Top labeler $8,945

ELF-50 Table top-Wrap around labeler $9,945

PL-211 PL-221 PL-501


PL-211 Top Labeler $13,990

PL-211C Top/front/bottom clamshell labeler $20,990

PL-221 Top and Bottom Labeler $23,990

PL-231 Bottom Labeler $16,990

PL-501 Vertical Wrap around Labeler $17,990

PL-622 Front and Back Labeler $36,990

PP-800 Front or Back panel labeler with conveyor $22,500

PP-850 Side and Back with conveyor $18,500

PP-900 Top and Side Labeler with conveyor-Applies label to the top and wraps label down both sides

$17,500

Optional Item Description RETAIL

Clear Label Sensor $1,350

Elf Hot Stamp Printer $3,950

PL Label Head Tilt Feature $1,950

Allen Hot Stamp Printer (for Pro Series only) $5,995



LABEL MACHINES

PL-10 label head on stand

Labeling Heads on Post Mounted Stand


ELF-10 4.5” Label Width w/Controller $7,445 PL-10 6.0” Label Width w/Controller $9,990 PRO 15 7.8” Label Width w/Controller $10,995



MAIL WRAPPERS / BAGGERS

Mailwrapper-280 Mailwrapper-280 w/discharge conveyor

*Great for magazines, periodicals, instruction booklets or loose sheets of paper

Model RETAIL

Mailwrapper-280 Width: 7”min – 11” max Length: 3” min – 17” max Cycle speed of 20-25 PPM 110 volt, 10 amp

$7,695

Optional Discharge Conveyor $2,500

Additional forming plow for ¾” product $ 295

SW Poly film rolls for 8 1/2” x 11” x ¼” magazine the recommended film size is 20” x 1.25 mill x 4,600 ft

$ 106



METAL DETECTION EQUIPMENT

ENTRY LEVEL-Metal Detector-Hawk 15 BPM-100 Free fall/Gravity feed ring type metal detector

MODEL Description Max Pkg Size RETAIL

Hawk-10 Metal detector-Stainless Steel construction-Wipe down, touch screen control, Fixed Belt speed

at 18m/60FPM, Plastic Intralox type belting.

MD-3010 11.8” w x 3.9”H MD-4010 15.7” w x 3.9”H MD-5010 19.6” w x 3.9”H MD-6010 23.6” w x 3.9”H

$12,750 $12,950 $13,500 $13,950

Hawk-12 Metal detector “

MD-3512 13.7” w x 4.7”H MD-4512 17.7” w x 4.7”H MD-5512 21.6” w x 4.7”H

$12,950 $13,500 $13,995



$13,250 $13,500 $14,150 $14,500


MD-3520 13.7” w x 7.8”H MD-4520 17.7” w x 7.8”H MD-5520 21.6” w x 7.8”H

$13,500 $13,950 $14,400



$14,500 $14,750 $14,950 $15,395


MD-5530 21.6” w x 11.8”H MD-6030 23.6” w x 11.8”H

$15,500 $15,995

BPM-100 Free fall/Gravity feed ring type metal detector

4” Dia (100mm) Ring opening

$11,400

BPM-200 Free fall/Gravity feed ring type Metal detector

8” Dia (200mm) Ring opening

$12,750

Optional Item Description RETAIL

Package Reject-Pusher Style $1,995



Pusher rejecter with lockable stainless steel bin $2,500

Package Reject-Air Blast Style $1,295

Stack Light-2 Position, Green on-Red Reject with or w/o belt stop $ 350

Beacon Light W/Alarm-When rejects, alarm will sound and red light will appear. $ 450

Variable speed drive $ 595

Stainless steel locking casters $ 350

S+S Brand of High Quality- Metal Detection Equipment

High performance metal detection solutions that include attention to Food Safety withinthe Sanitary design.

Compliance with HACCP and IFS Standards

Disassembles in minutes without tools

Clean design to IP-65 and IP-67 standards,

TCP/IP Network Compatible: Ethernet interface (TCP/IP 100 Mbit/s).

WLAN Interface: With integrated aerial (802.11 b/g).

Hard Copy Printed Reports: Optional production reports via log printer.

USB Interface: Export data from log file or user and system data

(available in combination with touch screen option).

Barcode Scanner Interface: Serial interface for remote product change using a barcodescanner.

Profibus Interface: PLC data highway

Construction: 304 stainless steel; angle and tube frame with food approved plastics


Genius 12” Wide Aperture x 4” H Conveyor speed up to 200 FPM (110volt)

$18,995

Genius Plus Color touch screen 5.7” with larger aperture $19,500

Optional Reject Bin $ 2,400



POLY BUNDLER/SLEEVE WRAPPERS

SEMI-AUTOMATIC: Sleeve wrapper with attached tunnel.

Dual push button operation with pneumatic pusher bar to advance product through seal area, Delta PLC controller, digital temperature controls, pneumatic product hold down, metal mesh tunnel conveyor with cooling fan. Speeds of 5 to 15 PPM depending on product size and film thickness.

*SFE-800SA Shown

Model

Power Volts/

Amps/Phase

Seal

Size

Max

Roll Width

Max pack Lt. Tunnel

Size L x W x H

RETAIL

SFE-800SA 220 60 3 29.5” 27” 19.5” 40 x 29 x 17 $24,650

SFE-1100SA 220 70 3 41¾” 39” 19.5” 44 x 40 x 20 $28,250

SFE-1500SA 220 80 3 57” 54.5” 27” 55 x 56 x 20 $34,800

SFE-1800SA 220 80 3 68” 65 36” 72 x 67 x 24 $45,000

Inline Fully Automatic: Sleeve wrapper with attached tunnel, Delta PLC Controller Power belt infeed conveyor with photo to activate cycle start, pneumatic product hold down, dual power film unwind, metal mesh tunnel conveyor belt, discharge cooling blower. Speeds of 5 to 20 PPM, depending on product size and film thickness.

*SFE-800NF Shown

Model

Power Volts/

Amps/Phase

Seal Size Max Roll Width

Tunnel Size

L x W x H

RETAIL

SFE-800NF 220 60 3 29.5” 27” 59 x 27 x 18 $31,500

SFE-1100NF 220 70 3 41¾” 39” 44 x 40 x 20 $35,500

SFE-1500NF 220 80 3 57” 54.5” 60 x 56 x 20 $45,950

SFE-1800NF 220 80 3 70” 65.5” 72 x 70 x 20 $65,950




• Right angle, Fully automatic, with attached tunnel.

*SFE-800AU Shown

Right angle infeed conveyor with dual photo eye operation. Multiple stroke count will allow for many different product configurations 3x2, 5x2, 3x5, etc 6, 8, 12, or 24 packs. Delta PLC Controller

*Production rate of up to 15 PPMdepending on Pkg. Size and configuration.

Model Power Volts/

Amps/Phase Seal Size

Max Roll Width Max Pack Lt. Tunnel Size L x W x H RETAIL

SFE-800AU 220 50 3 29.5” 29.5” 19.5” 40 x 29 x 17 $35,950

SFE-1100AU 220 60 3 41¾” 39” 19.5” 44 x 40 x 20 $40,600

SFE-1500AU 220 65 3 57” 54.5” 27” 55 x 56 x 20 $48,500

Optional items RETAIL

1 Increase Max Package height by 4” SE600 and 800 models only. $ 500

2 Increase Tunnel height by 4” SE600 and 800 models only.

$ 600

3 Increase tunnel height to 24” SE1100 and SE1500 models only

$1,850

4 Side compression Rollers at end of tunnel chamber to mat down poly film $ 595

5 Dual Lane diverter-Accumulates product and makes one push for higher speeds.

$7,500




POLY SHRINK TUNNELS ONLY

Model Power Volts/Amps/Phase

Chambers Size

RETAIL L W H

SE- 600 220 25 3 32” 21.5” 15” $ 9,450

SE- 800 220 40 3 40” 29.5” 17” $10,600

SE-1100 220 55 3 44” 41” 20” $12,850

SE-1500 220 60 3 55” 57” 20” $17,250

* ALL TUNNELS FEATURE HEAVY DUTY ZINC PLATED METAL MESH BELTING WITH COOLINGTOWER.

TUNNEL OPTIONS

Description: RETAIL

1. Increase Tunnel Height by 4” on Models 600 and 800. $ 500

2. Add 12” length to any tunnel. $1,425

3. Increase Tunnel height to 24” on SF-1100 and 1500 models only. $1,850

4. Non Standard Voltage 480 volt 3 phase $1,050



RIBBON BLENDERS / MIXERS

Ribbon Blender Ribbon Blades

Bottom Valve Discharge Safety Cover


MXB-50 1.5 cubic ft - 10 gallon or 65 lb capacity - 1 HP Motor $7,995

MXB-100 2.5 cubic ft –19 gallon or 71 liters- 125 lb capacity – 2 HP Motor $8,995

MXB-150 3.5 cubic ft –28 gallon or 180 lb capacity – 2 HP motor $11,500

MXB-200 5 cubic ft –37 gallon or 141 liters- 250 lb capacity – 3 HP Motor $13,500

MXB-300 7.5 cubic ft – 60 gallon or 375 lb capacity – 3 HP motor $15,550

MXB-400 10.5 cubic ft- 75 gallon or 282 liters- 500 lbs capacity – 5 HP motor $17,500

MXS-1000 21 Cubic ft – 150 gallon or 570 liters, 1000lb capacity-10 HP motor $24,950

MXS-1500 31 cubic ft– 225 gallon or 850 liters, 1,500 lb capacity-12 HP motor $29,950

MXS-2000 42 cubic ft-300 gallon or 1132 liters, 2000 lb capacity-15 HP motor $34,500

All units 220 volt, 3 Phase Power Manufactured in #304 Stainless Steel



SHRINK FILMS-POLYOLEFIN

Quick Shrink- 201 General Purpose Multi Layered Shrink Film 50 gauge 60 gauge 75 gauge 100 gauge

No Min Order $7.14 $7.14 $7.14 $7.14

CF Length 5,280 ft 4,375 ft 3,500 ft 2,625 ft

SW Length 10,560 ft 8,750 ft 7,000 ft 5,250 ft

Quick Shrink- IR High Performance Cross-linked Irradiated Film 45 gauge 60 gauge 75 gauge 100 gauge

No Min Order $9.30 $8.57 $8.57 $8.57

CF Length 5,820 ft 4,375 ft 3,500 ft 2,625 ft

SW Length 11,640 ft 8,750 ft 7,000 ft 5,250 ft

1. All pricing is per inch of width FOB: Ontario, CA2. Pre-paid freight $2,000 west coast, $2,500 mid west, $3,000 east coast3. Pre-Perforated film available upon request (add 5% to price)4. Printed film available in QS-201 and QS-IR (100 roll minimum, 3 color process) Call for pricing

*Stock roll widths from 8” to 24”*Film sizes can be mixed to maximize weight for free shipping*Shipping weight is based on 2.4lbs per inch of width*Quick Shrink films comply with FDA requirements for direct food contact.



SHRINK TUNNELS

*PP1606-20 Shown

Compact portable Light Duty shrink tunnel with live roller rod conveyor, re-circulating air chamber, digital temperature control, AC variable speed drive conveyor, automatic cool down with shut off. Legs and Locking casters. Available in 110 volt or add $250.00 for 220 volt. Table top units available-Deduct $100 if ordering table top unit.

* “New for 2013” viewing window now standard on most models *Model Chamber size Volts Amps. Phase RETAIL

PP1606-20 110v 20”L x 16W x 6”H 110 20 1 $2,195

PP1606-20 220v 20”L x 16’W x 6”H 220 10 1 $2,445

PP1606-20/SS Stainless Steel 110 20 1 $4,595

PP1808-28 PP1808-28-SS

Compact General Purpose shrink tunnel with live roller rod conveyor, AC variable speed drive, variable air velocity control, digital temperature control. Fully re-circulating air system. Automatic cool down with shut off. ½ HP Blower Motor

Model Chamber size Volts Amps. Phase RETAIL

PP1808-28 28”L x 18’W x 8”H 220 40 1 $4,595

PP1808-28 SS Stainless steel $8,950

PP1808-44 PP1808-44-SS

Medium capacity production shrink tunnel with live roller rod conveyor, AC variable speed drive, variable air velocity, re-circulating air system, digital temperature control. Automatic cool down with shut off. 1HP Blower Motor


PP1808-44 44”L x 18”W x 8”H 220 40 1 $ 6,595

PP1808-44-SS Stainless steel 220 40 1 $11,950

All stainless steel shrink tunnels designed for wash down only Stainless steel tunnels MFG for USDA Approval



SHRINK TUNNELS

PP2208-48 Shown

High capacity production shrink tunnel with variable air velocity, re-circulating air system, digital temperature control, live roller rod conveyor. Automatic cool down with shut off. 1 HP Blower Motor.


PP2208-48 48”L x 22”W x 8”H 220 50 3 $ 8,250


PP2610-52 52”L x 26”W x10”H 220 50 3 $ 9,250

PP3610-60 PP3628-60 with viewing window High capacity production shrink tunnel with all of the above features, including Dual 1 HP blower motor system, Dual heater banks, Dual variable air velocity controls, live rollers, and a 60” long chamber.


PP3610-60 60”L x 36”W x 10”L 220 50 3 $10,500


PP4510-60 60”L x 45”W x 10”L 220 60 3 $16,950

PP5520-72 72” L x 55” W x 20” H 220 60 3 $19,500

PP6520-96 96” L x 65” W x 20” H 220 60 3 $22,500

High Speed Shrink Tunnels

High speed shrink tunnel with Dual Chamber controls. Dual 1 HP blower motors, Dual heater banks, Dual air velocity controls, live roller, rod conveyor re-circulating air system. Recommended for high speed applications.

*PP1808-72 shown


PP1808-72 72”L x 18”W x 8”L 220 50 3 $11,950


PP2210-72 72”L x 22”W x 10”L 220 60 3 $14,250




SHRINK TUNNELS

Shrink Bundling Tunnel with (Dual Chamber) Dual 1 HP blower motors, dual heater bank, dual digital temperature control, dead roller conveyor system, variable air velocity, re-circulating air system. Cooling fans on discharge end of tunnel.

Model Chamber size Volts Amps. Phase RETAIL PP2216-60 60”L x 22”W x 16”L 220 60 3 $10,950

PP3616-60 60”L x 36”W x 16”L 220 60 3 $11,950

PP2620-72 72”L x 26”W x 20”L 220 60 3 $12,250



Tunnel Accessories TUNNEL ACCESSORIES RETAIL

Added tunnel height 2” increments for model PP1606-20 $ 275

Added tunnel height 4” increments up to 28” max height $ 525

Non-standard voltage $1,350

Paint – Custom colors $ 500

High density roller kit PP1808-28 $ 275

(rollers on 1” centers, ½” spacing) PP1808-44 $ 395

“ PP1808-72 $ 600

“ PP2208-48 $ 550

“ PP2610-52 $ 550

“ PP3610-60 $ 775

Teflon mesh belt overlay Kit PP1606-20 $ 275

“ PP1808-28 $ 325

“ PP1808-44 $ 395

“ PP1808-72 $ 495

“ PP2208-48 $ 450

“ PP2610-52 $ 495

“ PP3610-60 $ 585

Stainless steel metal mesh belting PP1808-28 $ 600

“ PP1808-44 $ 700

“ PP1808-72 $ 900

“ PP2208-48 $ 995

“ PP2610-52 $1,150

“ PP3610-60 $1,326

Heavy Duty Plastic Falcon Belting PP1808-28 $1,500

“ PP1808-44 $1,900

“ PP1808-72 $2,501

“ PP2208-48 $2,200

“ PP2610-52 $2,500

“ PP3610-60 $3,200

TPF system (Thin Package fixture) PP1808-28 $ 995

Adjustable floating upper roller PP1808-44 $1,495

assembly will shrink Pkg flat. PP1808-72 $1,595

l PP2208-48 $1,595


Infeed or Discharge Extensions (per foot) $ 600

Side guide rails in tunnel $ 400 Std roller spacing on 1.5” centers = 1” gap Hi Density rollers on 1” centers = ½” spacing Tunnel height from floor to conveyor is 32” Minimum-36” Max Optional Tunnel Conveyor Types Available:

Falcon Belting Stainless Steel Metal Mesh Teflon Mesh Belt Hi Density Rollers ½” Space



Shrink Banding Tunnels

Great for tamper evident neck bands, safety sleeves, pill bottles, jars, food containers and other similar containers.

PP-BS4C (Stainless Steel) PP-1540 (Painted frame)


PP-BS4C Tamper evident shrink banding heat tunnel for bottle caps with variable speed conveyor. #304 Stainless Steel Frame Tunnel height is adjustable. Max bottle Dia: 4” (100mm) Max bottle height: 2”-15 ¾” (50-400mm) Machine dimension: 59”L x 18”w x 58”H Electrical: 220 V, 1 phase, 20 amp

$6,795

PP-BS8C Same unit as above with larger tunnel opening of 8” wide $7,350

PP-BS10C Same unit as above with larger tunnel opening of 10” wide $8,950

PP-BS4 Same tunnel as above with no conveyor adjustable stand-4” opening

$5,500

PP-BS8 Same tunnel as above with no conveyor, adjustable stand-8” opening

$5,900

PP-BS10 Same tunnel as above with no conveyor, adjustable stand-10” opening

$7,150

PP-1540 Shrink tunnel with conveyor for neck bands. Conveyor length 59”, Tunnel length is 39”(1000mm) long. 4 3/4” (120mm) max bottle diameter x 12” (300mm) Tall, 220 volt, 1 phase 40 amp.

$4,800



Shrink Banding Tunnels

PP-48SBTC-SS (with conveyor) PP-48SBT-SS PP-1230X


PP-48SBTC-SS (With Conveyor) Fully body sleeves or neck bands shrink tunnel with variable

speed conveyor and adjustable heat control. Infra red heaters, stainless steel belt,

variable speed conveyor with adjustable side guides.

#304 Stainless Steel frame construction

Tunnel Dimensions: 48”L x 6” w x 6”H

Conveyor Dimensions: 79”L x 8” w x 36” H

Electrical: 220v 1 phase 35 amp

$9,500

PP-48SBT-SS No Conveyor- Shrink banding tunnel for neck bands in stainless steel construction.

Will fit over any existing conveyor line. Adjustable crank handle allows for proper tunnel height.

$6,995

PP-1230X Shrink tunnel for full body sleeves or neck bands without conveyor. This unit is

designed to fit over most any existing conveyor line. Painted Frame. Chamber size:

59” (1500mm) L x 6.75” (170mm) W x 12.5”317mm) H 220 volt, 1 phase 40 amp

$5,500

PP-1230 PP-2535 PP-1230 Shrink banding tunnel for fully body sleeves or neck bands. Features live roller

conveyor with close roller spacing. Adjustable air dampeners on both sides of

chamber. Dual blowers with digital temperature control. Conveyor length is 71” Long, Chamber size is 59” l x 6 ¾” W x 12.5” H

Electrical: 220 volt, 1 phase, 50 amp

$5,800

PP-2535 Same tunnel as described above with larger chamber area.

Tunnel has 14” wide opening x 12” high.

220 volt, 3 phase

$6,800



SHRINK SLEEVE APPLICATOR

PP-77 Shown with no ConveyorPP-77 Shrink Sleeve Labeling Machine in Stainless Steel construction, Delta color touch screen. High-speed shrink sleeve labeling machines are designed for full body sleeve labeling applications, as well as neck and cap banding, tamper-evident applications. The PP-77 is well-suited for a wide variety of industries and applications, although the tamper-resistant “neckbander” is ideal for beverage, pharmaceutical and cosmetic companies.

The shrink sleeve labeling machines are controlled by the Panasonic Servo System, which is based on an advanced brushless motor system that provides fast and accurate output. The high speed system features an adjustable shooter that can be easily set for different label lengths to accommodate all shrink sleeve applications.

Voltage – 110/220VAC, 50/60HZ 1 Phase 20AMP Dedicated Power – 1KW Controls – 3.5” Delta Color Touch Screen PLC – Panasonic FP0R Cutter Drive – Pneumatically Driven Film Feeding Device – Sanyo Stepper Motor Film Dispenser - Pneumatically Driven Maximum Sleeve Speed – 100 BPM Film Length – 120mm (4.72”) Film Size – 22mm – 180mm (.87”- 7.09”) Range of Bottle Diameter – 30mm – 90mm (1.18”- 3.54”) Maximum Bottle Height – 350mm (13.8”) Film Unwind Plate – 400mm (15.7”) Spool Core – 127mm–254mm (5”– 10”) Dimensions W-D-H – 675mm x 1030mm x 1980mm (26.6” x 40.6” x 78”) Net Weight – Approx 150 kgs (331 lbs)


PP-77 Automatic Shrink Sleeve Applicator 100 BPM $19,995

PP-77 with Conveyor With 2 meter (6.5ft) of conveyor $26,500

Cutting Knife Extra cutting knife $ 2,500

Mandrel Opens film over bottle $ 795




PP-10 Shown with no conveyor Same as PP-77 with faster speeds and lager capacity label and bottles sizes

Voltage – 110/220VAC, 50/60HZ 1 Phase 20AMP Dedicated Power in KW – 1.5 Controls – 5.7” Delta Color Touch Screen PLC – Panasonic FP0R Cutter Plate, 4 blades - 22mm – 60mm (.87” – 2.36”) Conveyor Dimensions L-W-H – 3000mm x 110mm x 900mm (118” x 4.3” x 35”) Conveyor Motor – Siemens AC ½ HP Maximum Sleeve Speed – 200 BPM Film Length – 120mm (4.72”) Film Size – 22mm – 250mm (.87”- 9.84”) Range of Bottle Diameter – 22mm – 125mm (.87”- 4.92”) Maximum Bottle Height – 350mm (13.8”) Film Unwind Plate – 500mm (19.7”) Spool Core – 127mm–254mm (5”– 10”) Motor Controls – Schneider Servo Motor Machine Dimensions W-D-H – 3000mm x 1100mm x 2000mm (118” x 43” x 78.7”) Net Weight – Approx 250 kgs (551 lbs)


PP-10 Automatic Shrink Sleeve Applicator 200 BPM $39,950

PP-10 with Conveyor With 2 meter (6.5ft) of conveyor $44,395

Cutting Knife Extra cutting knife $ 2,500

Mandrel Opens film over bottle $ 795




PP-150S ShownThe Model PP-150S is an automatic shrink sleeve applicator capable of running lay flat tubing of up to 200mm (7.8”) wide with a cut length from 40mm-200mm (1.5”-7.8”) at up to 150 BPM. The PP-150S will handle bottles from 28mm-125mm (1.1”-4.9”) in Diameter and up to 320mm (12.5”) Tall.

The PP-150S is ideal for a wide variety of shrink sleeve labels and container types. The bottles are feed on a conveyor through a separating worm gear. The system feeds a specified length of film from a film feed system through a "roller" arm system. The film then moves through a registration sensor and on to the "mandrel" assembly for high accuracy film indexing using a high speed fiber optical sensor. The systems mandrel opens the film and the film is then fed through the machine via a tractor feed assembly. This assembly feeds a specified cut length using servo motors. The film is then cut at the specified length by passing through the servo motor driven rotary cutter assembly. The film is then driven onto the product by use of a high speed film delivery assembly.


PP-150S Automatic Shrink Sleeve Applicator $34,995

Mandrel Opens film over bottle $895/ea

Worm Gear Screw Separates bottles on conveyor line $595/ea

Cutting Knife $2,500

Conveyor 4 1/2” wide sanitary stainless steel slat conveyor with variable speed drive, washdown motor

$550/per ft



Typical Production line with Shrink Sleeve applicator and Steam Shrink Tunnel

Machine

Machine model PP-150S

Capacity 150 BPM

Size L*W*H 2100*850*2000mm (83”L x 33.5”W x 79”H )

weight 600Kgs (1320lbs)

Powder supply AC 3-Phase 220/380V

Eligibility percent ≥99.5%

Host machine powder 2KW

Shrink labels

Materials PVC、PET、OPS

Thickness 0.03~0.13mm

Labels Length 40~200Mm (1.5”-7.8”)

Flat width Max200Mm (7.8”)

Inner Dia. Of Labels roll Standard 76mm (3”)

Bottles to pack

Height Max320mm (12.6”)

Diameter Ø 28- Ø125mm (1.1”-4.9”)

Material Glass、Metal and Plastic

Shapes Round , Square, Flat , Curved Cup-Shaped Bottles



Steam Tunnels

PP-2000M Steam Tunnel Only PP-2000M shown with Conveyor

Model RETAIL

The PP-1200M with 48” long chamber x 13.7” H made of # 304 Stainless Steel steam tunnel is easy to operate, easy to maintain and easy to clean. It is designed to efficiently shrink full body shrink bands on almost any container type and almost any shrink film material. The low pressure steam drum distributes steam evenly with a with an integrated steel tube design. There are steam jet tubes in each section of the tunnel which are adjustable for both height and steam output. The shell of the tunnel is constructed of #304 stainless steel and there is also a stainless steel water collecting plate to collect the condensated water. The machines stainless steel, water-proof design makes it easy to clean and maintain

Model PP-1500M Same as described above with 60” long chamber x 13.7” H

Model PP-2000M Same as described above with 80” long chamber x 13.7” H (Boiler sold separately-See next page)

Conveyor is sold separately, Plastic slat top conveyor x 4” wide (sold per ft) Includes variable speed drive

$ 8,500

$ 9,950

$11,500

$550/ft

Specification:

Tunnel Opening: (48”), (60”) or (79”) long x 5 3/4” wide x 12” high Steam Tubes: 6 adjustable tubes in 3 sections of tunnel (2 sections in PP-1200m) Construction Material: # 304 Stainless Steel Main Wall Power: 220V / 3 Phase / 50/60 Hz / 30 Amps Max. Electro-Thermal Power: 18 Kilo watts Steam Pressure: 3.62 – 5.80 PSI Overall Machine Size: 48”, 60” and 80”L x 22” W x 48” H Machine Weight: 510 LB (230kg) Steam Consumption: 55 LB /hour (24kg/h) Conveyor Speed: 0—100 feet /min



Steam Generator – sold separately

PP-30 Shown

The steam generators are an integrated system, National board of PVI inspected, ASME Coded, UL Listed, Canadian UL Listed.

Note: It is the responsibility of the customer to conform to any state or local codes.

This electro steam generator design consists of a high pressure chamber filled with water that is heated by submerged electric heaters. Automatic controls are provided to maintain the pre-set operating pressure and water level. Safety features include automatic low water cutoff, dual pressure controls, safety valve and visible water level gauge.

Specifications:

Main Wall Power: 220 Volt, 3 Phase, 50/60 Hz, 84 Amps Max. (480 Volt, 3Phase, 37 Amp also available)

Electric Rating: 30 KW Developed Boiler Horsepower: 3.0 Steam Capacity (at 212F)lbs/Hr: 103.5 Gross BTU Output: 100,400 Overall Dimensions: 26” L x 19” W x 23” H Steam Inlet: ½” Steam Outlet: ½” Weight: 200 lbs. (91kg)

Model KW Volts Amps Phase BHP Steam Capacity Lb/Hr at 212F

Gross BTU Retail

PP-20 20 220 56 3 2 69 67,000 $7,800

PP-25 25 220 70 3 2.5 86 83,750 $8,200

PP-30 30 220 84 3 3 103.5 100,400 $8,600



SIDE SEAL MACHINES-Intermittent and Continuous Motion

INT-20-2 Belt CM-20 Model Seal Size

L x W x H Description RETAIL

INT-20-2 Belt Std Model 40 PPM

20” wide cross seal 8” high opening unlimited length. Max package width 16”

“APA” Automatic Product Adjustment-Infeed conveyor and Inverting triangle will automatically adjust to package size from one touch control panel.

Delta 7”color touch screen with 12 Program memory.

Servo Drive Technology Rotary wheel side seal after end seal. Speeds of 30 to 50 PPM, 4” minimum package length. Designed for use with polyolefin or polyethylene films. Maximum package height 8”. Center Seal Standard.

The side seal automatically adjusts to package height setting on the Servo model.

$32,500

Stainless Steel $47,435

INT-20 2 Belt Servo Model 50 PPM

(1) Axis servo drive motor, no air required!

Servo drive offers higher speeds to 50 PPM, Automatic adjustment of seal head position, infeed conveyor and side seal.

$36,500

Stainless Steel made for USDA approval

$52,895

INT-20-3 Belt Same as above Rotary wheel side seal prior to end seal. 30 to 50 PPM. Maximum package height 8”. Center seal Standard. 3 Belt provides for automatic product separation.

$39,600

INT-30-2 Belt 30” cross seal Max package width 26”

Rotary wheel side seal after end seal. Max package height 10”

Speeds up to 50ppm

$40,500

INT-30-2 Belt

Stainless Steel

Same as above Wipe down only-Made for USDA approval $57,850

INT-30 3 Belt Same as above Rotary wheel side seal prior to end seal. 3 belt design allows for automatic product separation.

$44,500

SS Version Stainless Steel Wipe down only-made for USDA approval Inquire

INT-40-2 Belt 40” cross seal Max package width 35”

Rotary wheel side seal after end seal. Max package height 12” 3 Belt provides for automatic product separation.

$52,650

Stainless Steel Stainless Steel Wipe down only-made for USDA approval $76,300



CM-20 “Continuous Motion” Side Seal


CM-20 Hi Speed “Continuous Motion” rotary wheel side seal with Servo-Drive technology. 7” Delta color touch screen with “APA” Automatic Product Adjustment-Infeed conveyor and Inverting triangle will automatically adjust to package size from one touch control panel. 50 program memory. Servo Drive Technology Rotary wheel side seal before end seal. Speeds of 60 to 75 PPM, 4” minimum package length. Designed for use with polyolefin or polyethylene films. Maximum package height 8”, 20” Hot knife cross seal bar. Variable speed drive 0-100 FPM. 3 belt design provides for automatic product separation. (Infeeds sold separately)

220v 1 phase 20 amp

$55,500

CM-20-SS Same machine as described above in #304 stainless steel construction, (wipe down only)

$82,500

SIDE SEAL MACHINE OPTIONS Options for Side Seal Machines RETAIL

Closing Conveyor $1,950 Export crating $ 800 Non-standard voltage $1,200 Print Film Registration $3,500

Increase Package Height to 12” Maximum (INT models only) $5,000

3 ft Belted infeed conveyor w/adjustable side product guides $2,850

6 ft Belted infeed conveyor w/adjustable side product guides $4,000

3 ft Flighted infeed conveyor w/adjustable side product guides $3,500

6 ft Flighted infeed conveyor w/adjustable side product guides $5,995

6 ft flighted “Paddle Style” infeed conveyor with 3” to 6” wide paddle widths available $6,500

6 ft Flight Bar infeed conveyor, great for multi-packing of products $7,500

Extended infeed conveyor (3 ft sections) $3,500

Hole punch ¼” $3,895



STRAPPING MACHINES

MODEL RETAIL

SP-1 $ 870

Fixed Base, Enclosed cabinet, uses 3/8” or ½” strap, Mechanical Tension

Control, casters

SP-1SS $1,785

Stainless Steel

SP-1L $ 870

Low Table Height, Mechanical Tension Control

SP-1SL $1,100

Super Low Table Height, Mechanical Tension Control

SP-4 (Our most popular model) $ 870

Adjustable Height, uses 3/8” or ½” strap, Mechanical Tension control, casters

SP-4SS Stainless Steel $1,850

SP-4U Fixed table height. Mechanical tension control $ 870

SP-4E Adjustable Table Height, Electronic Tension Control $ 995

SP-4ED Adjustable Table Height, Electronic Tension Control, Digital Display $ 995

SP-5 $2,150

Vertical Strapping, Mechanical Tension Control

SP-5SS Stainless Steel $3,150



TP-101 Fully Automatic Strapping Machine

27 Straps per minute. Automatic Arch Type Strapping machine with standard

arch size of 34” w x 24” H, cycle start with foot switch, push button or table top roller

switch. 9 or 12mm strap size 8 x 8 core

size, 220 volt.

$4,500

TP101AP $7,850

Pneumatic Top Compression Cylinder to Compress Package

TP101SS $8,650

Automatic Arch Type, PLC Control, Stainless Steel

TP101PR $8,850

Fully Automatic Arch Type, Power Roller Table PLC Control, 3 Photo eyes

The TP-101-PR is a fully automatic strapping machine and is ideal for high speed automated packaging lines. The TP-101-PR strapping machine is suitable for many medium and heavy weight strapping applications. The system has powered table rollers. Strapping tension, power, temperature and storage are adjusted with outside controls for convenience.

TP-101 PR-Good for packages over 20 lbs.

TP101PB $8,950

Fully Automatic Arch Type, Power Belted Table, PLC Control, 3 Photo eyes with

timers allow strap position to be set on package.

TP-101 PB-Good for packages 20 lbs. or lighter

Arch Size

(Standard)Table Height Strap Width Strapping Speed

Max

TensionPower Supply Machine Dimensions Weight

W850mm

H600mm810mm 9,12,15mm 2 sec./Per Strap 80 kgs

220, 240, 380 V

50/60Hz 3PhaseW1600mm, D590mm, H1500mm 230kgs



Model RETAIL

TP201 $7,750

Fully Automatic Side Arch, PLC Control, 2 Photo eyes

TP-201 SS $10,285

TP301 $7,850

Fully Automatic Arch Type, PLC Control Low Table Height

TP301PB $9,925

Fully Automatic Arch Type, PLC Control, Power Belted, 3 Photo eyes

TP501 $8,450

Automatic Arch Type Thin Strap Capability 6mm

SS-502 $7,500

High speed 50-60 straps per minute, fully automatic, servo motor driven, PLC solid

state control, CE standard. Will run 5, 6, 8, or 9 mm strap width (specify at time of

order)

Optional Items

Automatic Threading Option

$595

Center belt for TP 101PB $595

Increase Arch Width every 8” $250

Increase Arch Height in 8”

Increments, add $200



PALLET STRETCH WRAPPERS

PP-981HP PP-981LP (Includes Ramp) Model Description “Entry Level” RETAIL

PP-981 HP High Profile –No Ramp Mechanical Brake Stretch 100%, 3,000 lb capacity, 10 RPM, 110 volt

$4,650

PP-981HP-Scale Package Built in scale with 6 Load cells, LED weight indicator to 5,000lb

$7,750

PP-981 HP/SS Stainless Steel Inquire

PP-981 LP Low Profile –Includes Ramp Mechanical Brake Stretch 100%, 3,000 capacity, 10 RPM, 110 volt.

$5,150

PP-981 LP/SS Stainless Steel Inquire

PP-982HP PP-982LP (Includes Ramp) Description “ Mid Range” RETAIL

PP-982 HP Electro Mechanical Brake Stretch Machines, up to 150% stretch. 4,000 lb capacity, Photo eye, 7” Color touch screen, 12 program memory, 0-12 RPM Turntable, 110 Volt. LP Model includes ramp

$5,795

PP-982 LP $6,350

PP-981 Now with soft start turntable for unstable loads and photo eye included.




PP-983HP PP-983LP (Includes Ramp)Description “High Quality” RETAIL

PP-983 HP High Profile-No Ramp – Powered Pre-Stretch @ 225%, 4,000 lb capacity, photo eye, 1 HP motor, 0-12 RPM Turntable, 110 volt

$7,850

PP-983HP/SS Stainless Steel Inquire

PP-983 LP Low Profile - Includes Ramp , Powered Pre-Stretch @ 225%, 4,000 lb capacity, photo eye, 1 HP motor, 0-12 RPM, 110 volt

$8,350

PP-983HP with Scale PP-983LP with Scale

Scale built into pallet wrapper frame using load cells, 5000 lb capacity, LED display

$10,950 $11,745

PP-983LP/SS Stainless steel Inquire




PP-983 PJ PP-983 TP PP-983DT

(Pallet Jack Turntable) (Top Platen Hold Down) (Dual Turntable)

*For Open base pallets only for light unstable loads


PP-983-PJ (Pallet Jack Turntable)

Designed for open base pallets only

No ramp required

Load pallet with pallet jack-Great for printing industry

$8,625

PP-983HP-TP Top platen hold down for light unstable product

$10,925

PP-983HP-DT (Dual Turntable)

Dual turntable for increased production speeds

$12,075

PP-983XT Automatic film attachment and cut-

remote lanyard start

$13,950




PP-4510R Robot PP-59T Powered turntable PP-985LW Luggage Wrapper- Stretch Wrapper With footswitch Great for airport kiosk


PP-4510R Robot Pallet Stretch Wrapper, 250% pre-stretch $10,995

PP-59T Powered turntable with footswitch $2,795

PP-985LW Luggage Wrapper Single 20” head $6,500

PP-985LW Luggage Wrapper Dual head system-(1) 20” pre-stretch head and (1) 30” head

$8,500

PP-987 Mattress/Sofa

wrapper Furniture wrapper (turntable is 102” L x 59” W) $12,219

Optional Items RETAIL

5,000lb Capacity Turntable (PP-983 ONLY) Turntable support rollers increased from 18 to 28

to support added weight and motor increased to 1 HP $1,325

Print out of weight date from scale $ 795

105” Wrap height (PP-981 or PP-983) $ 750

72” Diameter turntable (PP-981 or 983) $1,695

Base Extensions-24” (PP-981 or 983) $ 650

Extra Ramp $ 550

Instacut automatic film severance (PP-983 only) $ 695

Top platen hold down (PP-983 only) $2,550



Preferred Pack- PALLET WRAPPERS PP-983 Specifications PP-982 PP-981

Power Requirements 115 Volt, 1 Phase 15 Amp Same Same

Maximum Load Size 48” L x 48” W x 85” H Same Same

Maximum Load Weight 4,000 lb. Dynamic Same 3,000 lb Dynamic

Machine Dimensions 96” L x 58” W x 109” H Same 82” L x 58” W x 102”H

Crated Size 120” L x 62” W x 30” H Same Same

Estimated Shipping Weight 1,500 lbs. Same 1,200 lbs

Turntable 58” diameter Same Same

Turntable Drive Variable speed 0-12 RPM;

½ HP DC drive

Same Fixed speed at 10 RPM

Pre-Stretch 225% Pre-stretch No – Electromechanical

Mechanical Brake

No-Mechanical Brake

Turntable Drive Method Heavy duty chain drive Same Same

Turntable Support Heavy Duty Delrin Rollers w/Sealed Bearings

Same Same

Carriage Elevator Variable speed ½ HP Same Fixed Speed

Controls Delta Relays and Inverters Same Same

Photo Eye Yes Yes Yes

Forklift Portable Yes Yes Yes

Positive Alignment Yes Yes Yes

Warranty 3 years on all components Same Same

CE Approval Yes – Exceeds OHSA Safety

Standards

Same Same

Warranty: 3 years on all parts mfg. by Excel Packaging

PP-983 Standard Features

1. 225% Pre-Stretch: 3 ft. of film going through pre-stretch rolls comes out 10 ft. of film onto load.

Other pre-stretch gearing available with simple sprocket change

2. Photo Eye: Will automatically seek height of pallet load

3. Reinforcing Wrap: Allows machine to apply multiple wraps at any desired location

4. Home Position: Turntable always returns to original position

5. Automatic or manual operation switch

6. Adjustable wrapping tension

7. Adjustable turntable speed

8. Adjustable carriage elevator speed

9. Film Break Re-Start: If film brakes during operation, simply press START button again to continue program cycle. No need to start from the beginning again.

10. Top and Bottom Wrap Counter: Allows operator to select number of wraps on top or bottom of load.

11. Film carriage security door with safety interlocks: If door is opened, machine will automatically be shut off.

12. Emergency stop switch: When activated will shut off machine.



TRAY SEALING EQUIPMENT

SCS-320 TS-Pro Series Model 1808 SCS-1600

Table Top Tray Sealer Shuttle Style In-line Tray Sealer


SCS-320 Table top tray sealing machine. Great for yogurt cups, juice, fruits, meat, candy etc. Can use PP, PS, PET, Easy Peel Film, foil films. Single Cavity, 5.7” Color touch screen Seal area: 7” L x 5.5” w x 5.5”H Speeds of 10 ppm Stainless Steel frame work 220v, 1 Phase, 5 amp

$5,495

SCS-400 Same machine as above with larger seal area: 8.85”L x 6.8” W x 7” H Single cavity tooling

$5,995

SCS-400-2 Same machine as described above with dual (2) tray cavities $6,500

TS-Pro Shuttle style tray sealer using laminated films manufactured in # 304 Stainless Steel construction. Seal area of 12.8”(325mm) x 10.3” (262mm) x 4” (102mm) Tray is manually loaded and unloaded from the front. Pneumatic driven top seal platen, Top seal mold with knife, tray placement mold with anvil, Cycle output of 4-6 PPM. Omron PLC with Omron 7” color touch screen. 220 volt, 1 phase 60-80 PSI Includes one set of tooling Optional hot stamp ribbon printer (THR35A) 35mm 2x3mm

$17,950

$1,600

Model 1908 Intermittent Motion sealing with speeds from 5-27 PPM, Adjustable sealing dwell and sealing platen force, Uses straight slit film, unprinted or random repeat printed, Constructed of Stainless Steel and anodized aluminum. 120 volt 6 amps. Tray size: 8.5” x 6.5” x 3.25” H 3.5 or 7” film cut (OAL) 77” L x 23” W x 47” H

$18,995



Model 1808 Stainless Steel Frame Construction, Automatic Discharge, Rotary motion sealing at up to 35 PPM, Continuous motion of the conveyor, Removable tray carriers constructed of aluminum. 220 volt, 1 phase, 10 amp Tray size: 8.5” x 10” x 3.25” H (OAL) 83” L x 56” H x 27” W

$20,500

SCS-1600 In-line automatic tray sealing machine for 7” diameter containers using laminated films, Stack of containers are loaded manually into hopper and automatically dispensed, Sealing and cutting pneumatic operations controlled by Omron PLC and Omron 7” color touch screen, # of tray carriers-custom made. Speed dependent on tray size 20-40 PPM. Machine comes with one set of tooling molds. 220 Volt, 1 phase 3.5KW 60-80 PSI

Optional Hot stamp ribbon printer Additional set of tooling

$31,950

$1,600 $7,750

Tray and MAP Sealing Machines

Model RETAIL

VT-109 Will seal one #3 tray (7.7” x 5.7”) or 1-2 cups, Max film width 8.5”, Cycle speed of 10 cycles per minute, 110 volt, 10 amp. Table top, Auto /Semi-Automatic operation

$5,770

VT-400 Stainless Steel Construction, Semi-Automatic operation, Automatic film advance and cut system, Print film registration, Bush vacuum pump, Will run 2 Trays 7.7” x 5.7” x 3.5” deep, 2.5 cycles per minute, 230V, 3 phase, 30 amp, Max film width 19.6”

$22,800

VT-570 Stainless Steel Construction, Semi-Automatic operation, Automatic film advance and cut system, Print film registration, Bush vacuum pump, Will run 4 Trays 7.7” x 5.7” x 3.5” deep, 2.5 cycles per minute, 230V, 3 phase, 30 amp, Max film width 19.6”

$34,500



TURNTABLES / ACCUMULATORS

PP-36LS RSM-1200 PP-48AT PP-48UT Lazy Susan Turntable Stainless Turntable Accumulation Unscrambling

Turntable for Bottles Turntable


PP-36LS 36” Diameter turntable by 3” Deep lazy Susan product accumulator variable speed drive.

$1,395

PP-36LS-SS Same unit described above in Stainless Steel $3,550

PP-48LS 48” Diameter turntable by 3” Deep lazy Susan product accumulator variable speed drive.

$1,895

PP-48LS-SS Same unit described above in Stainless Steel $3,895

PP-60LS 60” Diameter turntable by 4” Deep Lazy Susan $2,395

PP-60LS-SS Same unit as above in Stainless Steel $4,895

RSM-1200 48” Diameter Lazy Susan accumulation turntable, Variable speed drive, #304 Stainless Steel Frame, 220 volt.

$4,650

RSM-800A 32” Diameter Rotary Unscrambler and Accumulator, Stainless Steel Construction.

Machine Dimensions: 47” L x 32” W x 33.5” H Electrical: 220 volt, 1 phase

$4,895

PP-36AT-SS 36” Diameter Accumulation turntable for bottles etc -Stainless Steel

$3,795


$4,495


$5,495

PP-48UT-SS 48” Diameter Unscrambling turntable in Stainless Steel $4,695

PP-60UT-SS 60” Diameter Unscrambling turntable in Stainless Steel $5,650

LS= Lazy Susan AT= Accumulation turntable UT= Unscrambling turntable



TWIST TIE MACHINES

TWIST TIE MACHINE 3567

The most technologically advanced twist tie machine in the world Model #3567. This state-of-the-art machine does not utilize a reciprocating arm which eliminates jams. The unique straight line ribbon feed avoids the ribbon jam ups that are common with other twist tie machines on the market today. The Model #3567 is U.L. approved constructed of all metal components for long and reliable service life

has a 1/2in. tying capacity and uses only a 3in. piece of twist tie ribbon per closure which is a 25% savings in consumables compared to competitive machinery making the Model #3567 for economical to use. Capable of tying up to 50 bags per minute the superior design and compact size has made it perfect for all applications including: bakery, food, candy, and confectionary industrial wire harnessing and assembly. The Model #3567 works with paper/plastic (our style #03-2500) twist tie ribbon plastic/plastic (our style #01-1500) twist tie ribbon decorative twist tie ribbon (our style #20-4000) and our exclusive patented Polycore (our style #17-2000) non-metallic twist tie ribbons.

Length: 21 in., Width: 7 in., Height: 12 in., Weight: 16 lbs. Tying Capacity: 1/2 in. dia., Operating Speed: 50 per minute Power: 110 volt (220v available)

TWIST TIE MACHINE 3570

The model #3570 is the perfect twist tie machine for larger bags or for applications where variable tying diameters are necessary. Adjustable tying diameters from ¼ inch to 1 3/8 inch allows this machine to be used for a variety of products including bags, small coils, hanks, bundles, and on most products where a twist tie closure is desired. Manufactured with the finest components, this machine requires no tools

to make tying adjustments, has separate adjustments for tying diameter and ribbon length, and requires no operator training prior to use. The Model #3570 uses 5/32 inch wide twist tie ribbon including our exclusive Polycor, non-metallic twist tie ribbon.

Length: 24 in., Width: 6 in., Height: 11 in., Weight: 26 lbs. Tying Capacity: 1/4 in. - 1-3/8 in. adjustable, Operating Speed: 40 per minute Power: 110 volt (220v available)

Model RETAIL

3567 $1,695 3570 $3,925 1,500 ft spools of paper or plastic ribbon 27 gauge wire 5/32” 5 Spools

10 Spools 25 Spools

50 Spools

$17.75 $17.25 $17.00 $16.35



VACUUM CHAMBER MACHINES

Model RETAIL

TC-280F Chamber size 14” x 15” x3.7” deep Distance between seal bar 11.8”, Seal bar length 11.8”, 110 volt

$2,095

TC-350FLR Chamber size 41” L x 16.6” W x 4.7” deep, Seal bar length 33”

$5,895

TC-420F Chamber size 19.8 x 19.2 x 7”, Distance between seal bars 14.9”, seal bar length 17.7”

$3,595

TC-420LR Chamber size 19.8 x 19.2 x 7 $4,095

TC-520F Chamber size: 23.6 x 23.6 x 7, Distance between seal bars 19.8”, Seal bar length 21”

$4,895

TC-520LR Chamber size: 23.6 x 23.6 x 7 $5,595



VACUUM CHAMBER MACHINES

SC SERIES VACUUM CHAMBER PACKAGING MACHINES

Model RETAIL

SC-420LR Chamber size 19.8 x 19.2 x 7” $4,695

SC-520LR Chamber size 23.6 x 23.6 x 7” $5,595

SC-680LR Chamber size 35.5 x 26 x 7” $6,995

SC-800LR Chamber size 38” x 33.5” x 8” $9,485

DC SERIES VACUUM CHAMBER PACKAGING MACHINES

Model RETAIL

DC-530 Chamber size 30” x 23.6” x 7” $ 9,680

DC-640 Chamber size 32” x 29” x 8” $12,280

DC-650 Chamber size 32.2” x 35” x 8” $13,080

DC-800 Chamber size 38.5” x 31” x 8” $14,385



VACUUM SEALERS-Entry Level-Table Top

E2000V E2000G Model RETAIL

E1000V 10” long Vacuum Sealer, seal, ¼” seal width, clean room compatible, LCD display, Retracting nozzle, no pinch jaw, foot switch, 110 volt E 1500V 15” long seal E 2000V 20” long seal E 2500V 25” long seal E 3000V 30” long seal E 3500V 35” long seal

$1,650

$1,750 $1,900 $2,350 $2,550 $2,850

E 1500G 15” long seal Vacuum sealer with gas purge E 2000G 20” long seal E 2500G 25” long seal E 3000G 30” long seal E 3500G 35” long seal

$2,100 $2,300 $2,750 $2,900 $3,150

E2000D E2000GSS T3500G Model RETAIL

E 2000D 20” Vacuum sealer with dual nozzle and gas purge, ¼” wide seal. E 2500D 25” long seal E 3000D 30” long seal E 3500D 35” long seal

$2,800

$3,250 $3,400 $3,650

E 2000GSS 20” Stainless Steel vacuum sealer with gas purge (same as above)

$2,800

T 1500G 15” Touch Screen Vacuum Sealer with gas purge, password protected 5 bag menu, multiple programs. T 2000G 20” long seal T 2500G 25” long seal T 3000G 30” long seal T 3500G 35” long seal

$3,300

$3,500 $3,950 $4,100 $4,350



VACUUM SEALERS-Medium Duty-Table Top

AVS AVN CAVS

Model RETAIL

AVS 20” Vacuum Sealer with foot pedal operation. $2,095

AVN 20” Vacuum Sealer with gas purge 25” long seal 30” long seal 35” long seal 50” long seal

$2,630 $3,140 $3,350 $3,560 $7,350

CAVS 20” Vacuum sealer, fully self contained no air supply required. 30” long seal

$3,142 $3,670

CAVN AVC-20 Vacuum Chamber

Model RETAIL

CAVN 20” Vacuum sealer, fully self contained, gas purge CAVN 30” Vacuum sealer, fully self contained, gas purge

$3,670 $4,080

AVC-20” Chamber vacuum sealer, chamber size 22” x 22” x 4” $5,460

AVCG-20” Chamber vacuum sealer with gas flush $5,800

3/8” (10mm) Seal width-$250.00



VACUUM SEALERS-Heavy Duty-Table Top

V V-1600

This Value Vac 1600 is truly a machine that delivers both quality and performance at a price that says, “WOW.” If you are looking for a no frills, entry level, commercial vacuum sealer, look no more. If longer seal lengths or other options are required, then take a look at our other available models. 120 volt, Vacuum pressure 20Hg, Air Consumption 2.5 CFM

MPV-18

MPV-18 is the vacuum sealer that handles the toughest vacuum packaging problems as well as the tightest budgets. It is an easy to operate economical vacuum sealer. With a price lower than the least expensive fixed nozzle. The Mighty Mutt provides high performance utilizing variable solid state controls for seal, dwell and vacuum timing. All these coupled with the ease of use of a retractable machine. The Mighty Mutt’s lightweight design and all metal construction mean portability and durability. The user-friendly retractable snorkel makes this entry-level unit a real winner. Perfect for small to medium shops. 115 volt, Vacuum pressure 20 Hg, Air Consumption 7.8 CFM

The “Workhorse” tabletop vacuum sealing line made from high grade stainless steel and heavy-duty anodized aluminum, these units will provide years of superior service. Ideal for medium to high volume use, sealers in the Retractable Series can be easily customized to meet special requirements in such diverse applications as food, medical or clean room environments. Standard features include: upper and lower heat bars; graphical screen control; single-parted exhaust; and exclusive built-in safety seal bar. The Retractable Series is an unequaled product for both its quality and price.

Model RETAIL

VV-1600 15.5” Seal Length x ¼” wide seal $1,495

MPV-18 17.5” Seal length x ¼” wide seal $2,195

Workhorse GVS2100R 21” seal bar $5,495



VACUUM SEALERS-Heavy Duty

NZ SERIES NOZZLE TYPE VACUUM PACKAGING MACHINE

NZ-1500 shown GVS2100R with stand Model RETAIL

NZ-600 with 23” seal bar, Nozzle Vac/Gas Stainless Steel construction, Gas Flush, Bag holding clips, IP-56 electrical box, Busch vacuum pump

$13,615

NZ-1000 Same as above with 39” seal bar $15,895

NZ-1500 “ “ “ 59” $21,080

NZ-2000 “ “ “ 78” $28,455

NZ-2500 “ “ “ 98” $35,830

NZ-3000 “ “ “ 118” $48,370

GVS-2100R With Stand-21” seal bar $ 8,995

GVS-2600R With Stand 26” seal bar $ 9,550

GVS-3100R With Stand 31” seal bar $10,075

GVS-3600R With Stand 36” seal bar $10,600



STOCK VACUUM BAGS-HEAVY DUTY 3 Mill 3 Mill STD Barrier Nylon/Poly COEX 7 layer Vacuum Bags

3 Seal pouches with seal dimension of 3/8” Inner packed in 250 quantity bagged

Minimum order $125.00 (Mixed sizes ok) Size Part # Qty per

case

Carton

Weight

Qty

1-5/m

C/1000

Qty

6-24/m

C/1000

Qty

25-100/m

Cost/1000 5 x 7 285-57 2000 14.2 $19.76 $17.80 $17.06/m $34.12 box 6 x 8 285-68 1000 10.3 $27.09 $24.40 $23.40 6 x 10 285-610 1000 12.5 $33.80 $30.50 $29.25 6 x 12 285-612 1000 15.6 $40.65 $36.60 $35.10 6 x 15 285-615 1000 19.2 $50.80 $45.75 $43.88 7 x 9 285-79 1000 13.5 $35.58 $32.02 $30.71 7 x 11 285-711 1000 18.3 $43.46 $39.15 $37.55 8 x 10 285-810 1000 16.4 $45.16 $40.67 $39.00 8 x 12 285-812 1000 19.8 $54.20 $48.80 $46.80 8 x 15 285-815 1000 25.3 $67.75 $61.00 $58.50 10 x 10 285-1010 1000 20.4 $56.45 $50.84 $48.76 10 x 12 285-1012 1000 24.1 $67.75 $61.00 $58.50 10 x 13 285-1013 1000 25.6 $73.38 $66.10 $63.38 10 x 15 285-1015 1000 31.0 $84.68 $76.25 $73.14 10 x 18 285-1018 500 18.3 $101.61 $91.50 $87.76/m $43.88 box 10 x 22 285-1022 500 23.1 $124.20 $111.85 $107.27/m $53.63 box 10 x 30 285-1030 500 31.3 169.36 $152.52 $146.27/m $73.13 box 12 x 12 285-1212 1000 30.5 $81.29 $73.21 $70.12 12 x 14 285-1214 1000 34.1 $94.84 $85.40 $81.90 12 x 16 285-1216 500 19.5 $108.40 $97.60 $93.60/m $46.80 box 12 x 18 285-1218 500 23.1 $121.95 $109.82 $105.32/m $52.66 box 12 x 20 285-1220 500 25.5 $135.50 $122.00 $117.02/m $58.51 box 12 x 24 285-1224 500 29.8 $162.58 $142.67 $140.42/m $70.21 box 14 x 16 285-1416 500 23.4 $126.45 $113.88 $109.22/m $54.61 box 14 x 20 285-1420 500 28.7 $158.08 $142.36 $136.52/m $68.26 box 14 x 24 285-1424 500 36.9 $189.70 $170.84 $163.82/m $81.91 box 16 x 20 285-1620 500 33.3 $180.65 $162.70 $156.00/m $78.00 box 16 x 24 285-1624 500 42.1 $216.78 $195.24 $187.24/m $93.62 box 16 x 26 285-1626 250 21.3 $234.85 $211.50 $202.84/m $50.71 box 16 x 28 285-1628 250 25.4 $252.92 $227.78 $218.44/m $54.61 box 18 x 22 285-1822 250 21.1 $223.56 $201.34 $193.08/m $96.54 box 18 x 28 258-1828 250 26.0 $284.54 $256.00 $245.75/m $61.43 box 20 x 28 285-2028 250 30.0 $316.15 $284.72 $273.05/m $68.26 box 22 x 34 285-2234 250 37.9 $422.28 $380.30 $364.70/m $91.17 box 24 x 36 285-2436 250 45.4 $487.77 $439.28 $421.27/m $105.32 box

These bags are commercial grade and will not work on home vacuum systems



VERTICAL FFS MACHINES

Vertical Form Fill and Seal Bagger

Recommended for all types of products packed in pillow or gusseted pouch using laminate film or BOPP roll stock.

*PM-420 Shown with optional auger feeder and discharge conveyor


PM-320 Vertical form fill and seal automatic bagging machine with 5.7” color touch screen for easy set-up and adjustment. Panasonic PLC controller, servo motor drive, photo eye for printed films, product counter. Speeds up to 50-55 cycles min Film width: 7.2-12.5” (185-320mm) Bag length: 2.75-11” (70-280mm) Bag width: 3.15 – 5.75 in. (80-150mm)

$25,500

PM-420 Same machine as described above with larger capacity. Speeds up to 50 cycles/min Film width: 7.6-16.5” (190-420mm) Bag length: 3-12” (70-310mm) Bag width: 3.35” -7.8” (85mm-200mm)

$27,500

PM-520 Same as above with larger capacity Speeds up to 45 cycles per minute Film width: 7.7”-20” (195-520mm) Bag length: 3-15.25” (70-390mm) Bag width: 3.35-9.5” (85-245mm)

$30,800

PM-620 Same as above with larger capacity. Speeds up to 35 cycles/ min Film width: 8.85-24” (225-620mm) Bag length: 3-19.5” (70-500mm) Bag width: 4-11.5” (100-295mm)

$35,310

Options: Stainless steel Frame Construction Hot Stamp Printer (THR25A) Video Jet 6220 Thermal Transfer Printer (1.26”x1.34” print area) Gas Flush Device Hole Punch (Euro Slot or Round Hole) Additional Forming Collar Film Static Eliminator Bag Gusset Device Powder Dust Extractor

$3,995 $1,600 $5,795 $1,850 $2,195 $1,950 $3,450 $2,595 $4,250



Vertical FFS-Sachet Packs-3 or 4 Sided Seals for Powders

52-AG Vertical Sachet FFS

The Model P-52 is a continuous cam-driven vertical form fill and seal for sachet packing of powder products for cosmetic, pharmaceutical, chemical, agriculture, and/or food industries in three or four-side seal bag. It can make a bag up to 90mm(3.5”) W x 140mm (5.5”) L. New servo power control auger for precise filling and turbine shuffle for flow boosting agitators.

Auger included in price

$18,750

G-52 Vertical Sachet FFS

The Model G-52 is a continuous cam-driven vertical form fill and seal for sachet packing of instant coffee, drink mix, sugar, salt, seasoning, and free flow granular products in three or four-side seal bag. It can make a bag up to 90mm (3.5”) W x 140mm (5.5”) L.


$16,500

R-95 The Model R-95 is an intermittent vertical form fill and seal, equipped with AG50-L auger filler for packing powder products for cosmetics, pharmaceuticals, chemical, agriculture, and/or food industries in lap seal or fin seal stick pack. It can make a bag up to 40mm (1.57”) W x 180mm (7”) L.


$22,000

Options: Chaplet Device-Chained Bags together Easy open tear notch Video Jet Model 1210 Small Character Ink Jet Printer (date code, lot number words etc) Video Jet 6220 Thermal transfer printer 1.26” x1.34” print area Additional Tooling for Bag Width Hot Stamp Ribbon Coder (THR25A)

$1,495 $1,695 $5,995

$5,795

$995 $1,600



Vertical FFS-For Liquids

High speed liquid & paste Vertical Form-Fill-Seal machine suitable for various low to medium viscosity liquids and paste like edible oils, fruit jam, ketchup, vinegar, shampoo, lotion or shower gels.


PM-150L Vertical filling machine for liquid products, Servo motor film drive system. 5.7” touch screen. Panasonic PLC, photo eye, auto diagnostics, seal style 3 side or 4 sided seal, can use piston pump, magnetic pump, or rotary pump. Production speeds of 40-150 BPM Fill range: 1-100ML (up to 3.38 oz) Bag length: 1.57” (40mm) to 7.87” (200mm) Bag width: 1.57” (40mm) to 3.75 (95mm)

$34,450

PM-52LP Vertical Sachet FFS machine for liquid products. 5.7” touch screen. Panasonic PLC, photo eye, auto diagnostics, seal style 3 side or 4 sided seal, rotary valve type volumetric filler. 20 litre hopper Production speeds of 24-54 BPM Fill range: 1-44ML (up to 1.5 oz) Bag length: 1.57” (40mm) to 5.5” (140mm) Bag width: 1” (25mm) to 3.5” (90mm)

$17,500

PM-65LP Vertical Sachet FFS machine for liquid products, Servo motor film drive system. 7” touch screen. Panasonic PLC, photo eye, auto diagnostics, seal style 3 side or 4 sided seal, can use piston pump, magnetic pump, or rotary pump. Stainless Steel Construction Production speeds of 30-60 BPM Fill range: 1-88ML (up to 3.0 oz) Bag length: 2” (50mm) to 11” (280mm) Bag width: 1.57” (40mm) to 5.5” (140mm)

$36,500

Available Options Stainless Steel Construction Hopper agitator with frequency regulator Pneumatic stop valve on spout-No leaks Additional forming device Hot stamp ribbon coder-THR25A (typeset 2x3mm) (Includes ribbon alarm) Video Jet 6220 Thermal Transfer printer 1.26” x1.34”

$3,500 $1,695 $ 750 $ 495 $1,600

$5,795



Optional Accessories: Weigh Scales


PM-UW2

PM-UM8

2 Head ultimate multi-head weigh scale with 5.7” color touch screen, high accuracy analog-digital load cell output, stepper motor drive, level sensor by load cell, 20 program memory, advanced mode selection with auto diagnostics. Filling range: 10-2000g (0.35 oz-105oz/ 6.56lbs) Weight accuracy: 0.05-2.0g Weighing speed: 10-25 cycles/min Hopper capacity: 5000ml Bucket Capacity: 2000ml Power: 220 volt, 1 phase, 1kw UW 2 XL Head Linear weigh scale (500-10000g fill

range, speed 5-20, 1-10 g accuracy,15000ml bucket)

$10,995

$12,500

19,500

PM-UW4 4 Head ultimate multi-head weigher with 5.7” color touch screen, high accuracy analog-digital load cell output, stepper motor drive, level sensor by load cell, 20 program memory, advanced mode selection with auto diagnostics.

Filling range: 5-200g (0.18oz-7oz) Weight accuracy: 0.2-2g (.07oz) Weighing speed: 25-50 cycles/min Hopper capacity: 500ml Bucket Capacity: 500ml UW 4-L (20-2000g fill range) (10-50 cycle rate) 3000ml

bucket

$13,500

$15,950

PM-UW10 10 Head multi-head weigh scale with 8.4” color touch screen, high accuracy analog-digital load cell, stepper motor drive. 99 program memory, stainless steel body

Filling range: 10-800g (3.5oz-20oz) Weight accuracy: 0.5-2.0g (.017oz-.07oz) Weighing speed: 65 cycles/min Bucket capacity: 1600ml

UW-10D Fill range (1500g) (45PPM)

UW-10D-XL Fill range (100-3000g) (50 PPM)

$21,500

$22,500 $23,500



PM-UW14 14 Head ultimate multi-head weigh scale with 10.4” color touch screen, high accuracy analog-digital load cell, stepper motor drive. 99 program memory, stainless steel body

Filling range: 10-800g (.35oz-28oz) Weight accuracy: 0.1-1.5g (.05oz) Weighing speed: up to 120 cycles/min Bucket capacity: 1600ml

UW-14D Fill range (2000g) (80ppm)

UW-14DXL Fill range (100-3000g) (up to 70 ppm)

$31,500

$32,500 $33,500PM-UW16 16 Head ultimate multi-head weigh scale with 10.4”

color touch screen, high accuracy analog-digital load cell, stepper motor drive. 99 program memory, stainless steel body

Filling range: 10-300g (.35oz-10.6oz) Weight accuracy: .01-1.5g (.035oz-.17oz) Weighing speed: up to 120 ppm Bucket capacity: 1600ml

$35,000

PM-UW20 20 Head ultimate multi-head weigh scale with 10.4” color touch screen, high accuracy analog-digital load cell, stepper motor drive. 99 program memory, stainless steel body

Filling range: 10-800g (.35-28oz) Weight accuracy: 0.1-1.5g (.035oz-.17oz) Weighing speed: up to 130 ppm Bucket capacity: 1600ml

$39,950

WR-32 Bowl Feeder with 320mm (12.5”) diameter bowl $4,995



Feeding Conveyors: “Z” Bucket Elevators

ZET-183 Z-Bucket elevator will feed product into 10,14, 16 or 20 head weigh scale, Stainless steel construction with food grade plastic bucket, Variable speed drive.

Single bucket conveyor with 80L product hopper-stainless steel

$15,950

$9,285

Feeding Conveyors: Incline Conveyors

INC-132 Incline Conveyor - stainless steel, intra-lux belt, variable speed, vibration feeder with 60 litre hopper, conveyor capacity <5 CBM/Hr. Conveyor height 3.8m 220v

$11,500

Discharge Conveyors: INC-52

INC-52 Product exit conveyor-Stainless steel construction, food grade plastic mesh white color belting, intra-lux.

$3,495

Working Platforms: For Vertical FFS machines

PL-10 Platform for multi-head weigh scale, Stairway and gangway on 4 sides for ease of maintenance, Constructed of mild steel with PVC coated paint.

$ 9,950

PL-5 Mini-Platform $5,995



Auger Fillers:

AG-95S Auger filler

The Model AG95-S is a standalone auger filler for filling powder and granular products for cosmetics, pharmaceutical, chemical, agriculture, and/or food industries. It is equipped with a self-feeding auger and range from 500 to 1000g. (16-36oz) #304 Stainless Steel Construction

$15,250

AG-95L Auger screw Filler driven by servo motor (Designed to connect to vertical FFS machine)

The Model AG95-L is an auger filler to integrate with a form fill seal for filling powder and granular products for cosmetics, pharmaceutical, chemical, agriculture, and/or food industries. Range up to 1000 g. (36oz)

Fill range: 1-1000g Accuracy: + or – 0.3-1% Hopper Volume: 20L Auger Cycle: 1.2s Construction: # 304 Stainless Steel Electrical: 220 volt, 1 phase 60hz

$14,950

AG-135L 1-2000g, 50 litre Hopper, 220 V, 1 phase 2.0kw $16,900

Volumetric Fillers: To feed Vertical FFS machines

GT-115 Turntable Volumetric Filler - Step less telescoping volume adjustment, stainless steel contact parts, level sensor for re-fill alarm, variable speed. Accuracy +/- 2.5%

$7,500

G-420 Volumetric Filler –Best used with rice, nuts etc. $7,250



Screw Conveyors: To feed Vertical FFS machines

SW-88 Auger Screw conveyor feeds product to auger filler.

Conveyor Capacity: 35 Cubic ft (264 gal) or 1,250 lbs per hour Conveyor Height: 1700mm (67”) Hopper Capacity: 30 gallons (4 cubic ft) Construction: 304 Stainless Steel Electrical: 220 volt, 3 phase, 60hz

$5,500


Conveyor Capacity: 105 cubic ft (785 Gal/hr) or 3,695 lbs per hour Conveyor Height: 1700mm (67”) Hopper Capacity: 60 Gallon (8 cubic ft) Construction: 304 Stainless Steel Electrical: 220 volt, 3 phase, 60hz

$7,200


Conveyor Capacity: 176 cubic ft (1300 Gal/hour) or 6,200 lbs/hour Conveyor Height: 1700mm (67”) Hopper Volume: 60 gallons (8 cubic ft) Construction: 304 Stainless Steel Electrical: 220 volt, 3 phase, 60hz

$12,500

Additional Options:

Gusseted Bag Forming Device Triangle shaped finger push in on the side of the bag prior to sealing to create the side gusset.

$1,595

Hot Stamp Printer Model THR-35C 35mm high text (3 lines of type)

Includes alarm. Air required $2,100

Hopper Upgrade Upgrade to 120 liter hopper for increase capacity and

speed. $695



WEIGH SCALES

OP-W-P Portion Scale OP-915 Bench Scale OP-918 Pallet Jack Scale OP-916 Floor Scale

OP-W Portion Bench Scale Features: Durability and Cleanliness in One Stylish Design Ideal for Food Processing andHarsh Environments

Multiple weighing units: lb, oz, kg, g Large Stainless Steel Platter Warranty: 1 Year

Product No. Capacity IP Rating Pan Size Height Material Weight Retail

OP-W-P-3 3kg x 0.2(g)

IP 65 Splashproof

10" x 7.8" 4"/100mm S.S. + ABS plastic 12 lbs $222 OP-W-P-6 6kg x 0.5(g) 10" x 7.8" 4"/100mm S.S. + ABS plastic 12 lbs $230

OP-W-P-30 30kg x 0.2(g) 10" x 7.8" 4"/100mm S.S. + ABS plastic 12 lbs $240 OP-W-S-3 3kg x 0.2(g)

IP 67 Washdown

10" x 7.8" 4"/100mm All S.S. 13 lbs $345 OP-W-S-6 6kg x 0.5(g) 10" x 7.8" 4"/100mm All S.S. 13 lbs $350

OP-W-S-15 15kg x 1(g) 10" x 7.8" 4"/100mm All S.S. 13 lbs $355 OP-W-S-30 30kg x 0.2(g) 10" x 7.8" 4"/100mm All S.S. 13 lbs $360

OPF-P Series Part Counting Balances Features: Vibrating Technology provides the highest level of counting accuracy PLU for storing sample weights so they can be easily retrieved 30,000 displayed resolutions 3 displays (Weight, Unit Weight, Count) Truly portable with both AC adapter and rechargeable battery that lasts 100 hrs High visibility back-lit liquid crystal display (LCD) Durable ABS housing and large anti-static stainless steel pan Warning for insufficient unit piece weight and sample size Optional RS-232c for bi-directional communication with a PC or a printer Multiple weighing units: g, kg, lb, oz

Model # OPF-P3 OPF-P6 OPF-P15 OPF-P30

Capacity 3kg 6kg 15kg 30kg

Readability 0.1g 0.2g 0.5g 1g

Dimension 13.5" x 13" x 4" / 34cm x 32cm x 9.5cm

Pan Size 13.3" x 9" / 34cm x 22cm

Power Input 100-240V AC adapter and Rechargeable battery (included)

Ambient Temp 5--40°C

Weight 3.7 kg (8 lbs)

Retail $295 $325 $350 $375



OPF-N Series Precision Balances Features: Large removable stainless steel weighing platform Parts counting, percent weighing, and dynamic weighing Comes with a 9V rechargeable battery Large high contract back-lit liquid crystal display (LCD) Splash proof keyboard and display Anti-static stainless steel weighing pan and glass windshield Automatic zero-tracking and full range tare Calibration with reference weights Optional RS-232c for bi-directional communication with a PC or a printer Multiple weighing units: g, kg, lb, oz

Model # OPF-N3 OPF-N7.5 OPF-N15 OPF-N30

Capacity 3kg 7.5kg 15kg 30kg

Readability 0.1g 0.2g 0.5g 1g

Repeatability ±0.1g ±0.2g ±0.5g ±1g

Linearity ±0.2g ±0.5g ±1g ±2g

Dimension 10.5" x 12.5" x 5.5" / 26cm x 32cm x 14cm

Pan Size 11" x 8.5" / 26cm x 22cm

Power 100V-240V AC adapter and rechargeable battery included

Ambient Temp 5--40℃

Weight 3.5 kg (8 lbs)

Retail $295 $325 $350 $375

OPH-P Series Precision Electronic Balance Scale Features: Extremely high precision balance Large and wide angle backlit LCD display Splash proof keyboard and display Standard RS-232C for bi-directional communication with a PC or connecting directly to a printer Draftshield for preventing the influence of convection and other factors Multiple weighing units: G, Ct, lb, Oz, Ozt Dwt Warranty: 3 years limited

Model # OPH-P103 OPH-P203 OPH-P303

Capacity 100g 200g 300g

Readability 0.001g

Repeatability ±0.002g

Linearity ±0.002g

Dimension 8" x 11" x 12" / 20x28x30cm

Pan Size Φ 3.25" / 82mm

Power Input 100V-240VAC (adapter included)

Output 6vDC-9vDC/600mA


Weight 2.7kgs (6 lbs)

Retail $550 $595 $650



OPK Series Compact Precision Balances / Kitchen Scale Features: Sturdy plastic construction with stainless steel pan Level bubble that makes it a high precision balance Quick and easy weighing in the lab or in the field Splash proof keyboard and display Multiple weighing units: G, Oz, CT

2 years limited warranty

Model # OPK-P250 OPK-P500 OPK-P2500 OPK-P5000 OPK-S250 OPK-S500 OPK-S2500 OPK-S5000

Pan Material Plastic Stainless Steel

Capacity 250g 500g 2500g 5000g 250g 500g 2500g 5000g

Readability 0.1g 0.1g 1g 2g 0.1g 0.1g 1g 2g

Repeatability 0.1g 0.1g 1g 2g 0.1g 0.1g 1g 2g

Linearity 0.1g 0.1g 1g 2g 0.1g 0.1g 1g 2g

Dimension 9" x 16" x 1.6" (23 x 40 x 4cm)

Pan Size 7" x 7 (17.5 x 17.5cm 5.7" x 5.7" (14.5 x 14.5cm)

Input 100V adapter or 4 AA batteries (not included)

Power Output 6vDC-9vDC/600mA


Weight 0.4 kgs (1 lb)

Retail $60 $65 $70 $75 $75 $95 $105 $125

OP-915 Bench Scale Features: Durable structure w/over protection Stainless steel cover Warranty: 2 yrs on platform, 1 yr on electronics

Includes: Column Display with Rechargeable battery Adjustable Level Feet

NN=Not legal for trade

Product No. Capacity IP Rating Pan Size Material Weight Retail

OP-915-1212-100 100lb x 0.02lb

Splashproof IP65

12" x 12" C.S. deck; S.S. cover 26lbs $395

OP-915-1212-100-NN 100lb x 0.02lb 12" x 12" C.S. deck; S.S. cover 26lbs $450

OP-915-1616-300 300lb x 0.05lb 16" x 16" C.S. deck; S.S. cover 31lbs $495 OP-915-1616-300-NN 300lb x 0.05lb 16" x 16" C.S. deck; S.S. cover 31lbs $450 OP-915S-1616-300 300lb x 0.05lb Washdown IP67 16" x 16" All Stainless Steel 41lbs $895

OP-915-1620-400 400lb x 0.05lb

Splashproof IP65

16" x 20" C.S. deck; S.S. cover 38lbs $495 OP-915B-1824-500 500lb x 0.1lb 18" x 24" C.S. deck; S.S. cover 87lbs $550 OP-915B-1824-1000 1000lb x 0.2 lb 18" x 24" C.S. deck; S.S. cover 89lbs $595 OP-915BW-1824-500 500lb x 0.1lb 18" x 24" C.S. deck; S.S. cover 90lbs $650

OP-915BW-1824-1000 1000lb x 0.2 lb 18" x 24" C.S. deck; S.S. cover 92lbs $695

OP-915-2424-500 500lb x 0.1lb 24" x 24" C.S. deck; S.S. cover 66lbs $625 OP-915-2424-500-NN 500lb x 0.1lb 24" x 24" C.S. deck; S.S. cover 66lbs $550 OP-915-2424-1000 1000lb x 0.2 lb 24" x 24" C.S. deck; S.S. cover 84lbs $695

OP-915S-2424-500 500lb x 0.1lb Washdown IP67 24" x 24" All Stainless Steel 66lbs $995

OP-915-BW-2432-1000 500lb x 0.2lb Splashproof IP65 24" x 32" Diamond Plate cover 146lbs $695



OP-916 Floor Scale Features: Heavy Duty and Low Profile (Add ramp 4x4=$350 / 5x4=$425)

OP-917 Drum Scale (built-in ramps) Features: -Large checkered safety plate platform with integral ramps

-Ultra low profile

-Live rails, weighing directly or placing a pallet across the rails

-4” long integral ramped end -Warranty: 2 yrs on platform, 1 yr on electronics

NTEP-Legal for Trade

Product No. Capacity Weighing Platform Additional Features Weight Retail

OP-917-PT-1000 1000 lb x 0.2(lb) 30"(L) x 32"(W) x1.5"(H) Handles and wheels for easy move 135 lbs $1,195

OP-917-PT-2000 2000 lb x 0.5(lb) 30"(L) x 32"(W) x1.5"(H) Handles and wheels for easy move 135 lbs $1,295

OP-917-HD-5000 5000lb x 1(lb) 52"(L) x 48"(W) x1.5"(H) Heavy duty, large platform size 305 lbs $1,495

Product No. Capacity Platform Construction Weight Retail

OP-916-2x2-5 5,000 lb x 1 lb / 2500kg 2' x 2' x 3.5" (H) Welded Steel, tread plate 82 lbs $595

OP-916-2x2-5-NN 5,000 lb x 1 lb / 2500kg 2' x 2' x 3.5" (H) Welded Steel, tread plate 82 lbs $550

OP-916-3x3-5 5,000 lb x 1 lb / 2500kg 3' x 3' x 3.5" (H) Welded Steel, tread plate 194 lbs $795

OP-916-3x3-5-NN 5,000 lb x 1 lb / 2500kg 3' x 3' x 3.5" (H) Welded Steel, tread plate 194 lbs $750

OP-916-4x4-2 2k lb x 0.5 lb / 1000kg 4' x 4' x 3.5" (H) Welded Steel, tread plate 270 lbs $895

OP-916-4x4-5 5,000 lb x 1 lb / 2500kg 4' x 4' x 3.5" (H) Welded Steel, tread plate 270 lbs $1,295

OP-916-4x4-5-NN 5,000 lb x 1 lb / 2500kg 4' x 4' x 3.5" (H) Welded Steel, tread plate 250 lbs $1,195

OP-916S-4x4-5 5,000 lb x 1 lb / 2500kg 4' x 4' x 3.5" (H) All Stainless Steel, smooth top 270 lbs $1,895



OP-916-4x4-10-PF 10,000 lb x 2 lb / 5000kg 4' x 4' x 3.5" (H) Welded Steel, tread plate 320 lbs $1,395

OP-916S-4x5-5 5,000 lb x 1 lb / 2500kg 4' x 4' x 3.5" (H) Welded Steel, tread plate 340 lbs $1,395

OP-916S-4x5-10 10,000 lb x 2 lb / 5000kg 4' x 4' x 3.5" (H) Welded Steel, tread plate 340 lbs $1,495





OP-916-5x5-10-PF 10,000 lb x 2 lb / 5000kg 5' x 5' x 3.5" (H) Welded Steel, tread plate 480 lbs $1,695






Warranty: 2 yrs platform; 1 yr electronics NN=Not legal for trade



OP-921 Drum Scale/Low Profile Scale with 2 Ramps Features: Ultra low profile with self-aligned two ramps Live side rails can weigh items that extend beyond the scale Warranty: 2 yrs on platform, 1 yr on electronics

Includes: NTEP LED Display with Rechargeable Battery Options: Stainless Steel Construction (call for pricing)

Product No. Capacity Weighing Platform D Shipping Weight Retail

OP-921-5000 5000 lbs 36" x 36" x 1.5"(H) 290 lbs $1,495

OP-918 Pallet Jack Scale Features: Unique and user-friendly design for you to work with Rechargeable battery lasts 72 hrs in operation Warranty: 2 years on platform, 1 yr on electronics LED display

Options: Built-in printer: add $195

Product No. Capacity Weighing Platform Fork Height Weight Retail

OP-918-3000 3000 lb x 1 (lb) 4' x 2.5' 3" 360 lbs $1,695

OP-918-5000 5000 lb x 1 (lb) 4' x 2.5' 3" 360 lbs $1,895

OP-920 Portable Livestock Scale Features: Ramped ends Thread Plate Top with Handles and Wheels Warranty: 2 yrs on platform, 1 yr on electronics

Includes: LCD display with rechargeable battery Options: Stainless Steel Construction: add $________

Product No. Capacity Size (incl. ramped ends) Height Weight Retail

OP-920-1000 1,000 lbs 20" x 50" 2.5" 113 lbs $695

OP-918-5000 2,000 lbs 20" x 50" 2.5" 113 lbs $795

OP-922 Vet Scale Features: Solid Construction for Weighing Small to Large Animals Large 43”x20” Stainless Steel Cover with Anti-Skid Mat An alternative for weighing large boxes or cratesWarranty: 2 yrs on platform, 1 yr on

electronics Product No. Capacity Weighing Platform D Shipping Weight Retail

OP-922-500 500 lbs 43"(L) x 20"(W) x 2"(H) 58 lbs $895

OP-922-1000 1000 lbs 43"(L) x 20"(W) x 2"(H) 58 lbs $995

Includes: LED Display with Rechargeable Battery Options: Display stand in stainless steel: add $95



OP-923 Axle Scale Features: Large weighing surface and low profile for checking vehicle weight Can be used for both above ground or flush with ground Forklift portable NEMA 4 SS NTEP LCD Display with rechargeable battery

Warranty: 2 yrs on platform, 1 yr on electronics

Product No. Capacity Weighing Platform D Ramp Length Shipping Weight Retail

OP-923-60k 60k lbs 84"(L) x 30"(W) x 5.75"(H) 24" 1160 lbs $8,995

OP-925 Crane Scale Features: Provides solutions to most of your overhead weighing needs Durable construction, Heavy Duty Long-lasting rechargeable battery Warranty: 1 year Includes: LED Display with rechargeable battery

Wireless remote control with hold function

Product No. Capacity Weight Retail

OP-925-1000 1000 lbs 25lbs $695

OP-925-3000 3000 lbs 27 lbs $750

OP-925-6000 6000 lbs 30 lbs $950

OP-925-10000 10000 lbs 55 lbs $1,195

OP-925-20000 20000 lbs 106 lbs $1,295

OP-925-40000 40000 lbs 190 lbs $1,995

OP-925-W-10000 10000 lbs 110 lbs $2,495

OP-925-W-20000 20000 lbs 126 lbs $3,295

OP-925-W-40000 40000 lbs 200 lbs $7,995

OP-925-W-100000 100000 lbs 1040 lbs $14,950

OP-926 Hanging Scales Features: Affordable crane scale with highly accurate load cell Easy to install and operate Warranty: 1 yearIncludes: LED display with rechargeable battery

19’ load cell cable Eye bolts Carrying case

Product No. Capacity Weight Retail

OP-926-250 250 lbs 8 lbs $395

OP-926-500 500 lbs 8 lbs $425

OP-926-1000 1000 lbs 8 lbs $450

OP-926-2000 2000 lbs 8 lbs $475

OP-926-3000 3000 lbs 8 lbs $495

OP-926-5000 5000 lbs 10 lbs $525

OP-926-10000 10000 lbs 12 lbs $550

Options: Display stand in stainless steel: add $95

Options: Scoreboard indicator: add $295



OP-930 Cattle Scales Features: Great for weighing hogs, sheep, cattle Heavy duty Motion sensing technology for accuracy Warranty: 2 yrs on platform, 1 yr on electronics NTEP-Legal for trade Nema 4 Stainless Steel display with rechargeable battery Swivel casters

Product No. Capacity Platform Dimension Cage Height Weight Retail

OP-930-5x7 10,000 lbs 84"(L) x 60"(W) x 5"(H) 40" 560 lbs $4,995

OP-930-6x10 20,000 lbs 120"(L) x 72"(W) x 5"(H) 60" 980 lbs $7,995

OP-310 Single-Ended Shear Beam Load Cells Features: Ideal for process weighing and for use in low profile industry scales Easy to install and durable in the field Warranty: 2 years

NTEP-Legal for trade Environmental protection through water resistant potting and strain relieved cable

Product No. Capacity Material Cable Length Envelope Retail

OP310-0.5 500 lbs Plated Alloy Steel 20 ft Small $195

OP310-1 1000 lbs Plated Alloy Steel 20 ft Small $195

OP310SS-1 1000 lbs Stainless Steel 20 ft Small $250



OP310SS-2.5 2500 lbs Stainless Steel 20 ft Small $250





OP310LE-5 5000 lbs Plated Alloy Steel 20 ft Large $295




OP-311 Single-Point Load CellsFeatures: Highly accurate and low cost, ideal for OEM applications and highly resistant to eccentric loading and allowing direct mounting to the scale base and weighing platform Warranty: 2 years

Product No. Capacity Material Cable Length Retail

OP311-50KG 50 kg Aluminum 12 ft $150








OP-312 Tension S-type Load Cells Features: Offers precision for both tension and compression Sealed with the latest compounds to withstand most challenges Warranty: 2 years NTEP Approved

Product No. Capacity Material Cable Length Retail

OP312-0.2 200 lbs Plated Alloy Steel 20 ft $275



OP312-1 1000 lbs Plated Alloy Steel 20 ft $295









OP-730 Single-Ended Beam Mounts (Tank Cell) Features: Ideal for making any tank of vessel into a scale NTEP Approved Warranty: 2 years

Product No. Max. Capacity Material Cable Length Envelope Retail

OP-730-2.5 2500 lbs Plated Alloy Steel 20 ft Small $495

OP-730-5 5000 lbs Plated Alloy Steel 20 ft Small $495

OP-730LE-5 5000 lbs Plated Alloy Steel 20 ft Large $550




OP-710 Wireless Transmitter/Receiver Module Features: Replaces the load cell cable Up to 300” transmission range IP65 metal enclosure Power: Standard 110VAC (call for battery options) Warranty: 1 year

Product No. Material Retail (transmitter + receiver)

OP-710 Mild Steel $495



OP-100 Series Test Weight Kits Features: Metric test weights Industry standard high accuracy High quality aluminum case with professional tweezer Call for individual test weights (1mg --- 20kg)

Product No. Standard Includes Retail

OP-100M1-200 M1 (1) 1mg; (2) 2mg; (1) 5mg; (1) 10mg; (2) 20mg; (1) 50mg; (1) 100mg; (2) 200mg; (1) 500mg; (1) 1g; (2) 2g; (1) 5g; (1) 10g; (2) 20g; (1) 50g; (1) 100g; (2) 200g

$295

OP-100F2-200 F2 $350

OP-100F1-200 F1 $425

OP-100M1-500 M1 (1) 1mg; (2) 2mg; (1) 5mg; (1) 10mg; (2) 20mg; (1) 50mg; (1) 100mg; (2) 200mg; (1) 500mg; (1) 1g; (2) 2g; (1) 5g; (1) 10g; (2) 20g; (1) 50g; (1) 100g; (2) 200g; (1) 500g

$350

OP-100F2-500 F2 $395

OP-100F1-500 F1 $495

OP-100M1-1000 M1 (1) 1mg; (2) 2mg; (1) 5mg; (1) 10mg; (2) 20mg; (1) 50mg; (1) 100mg; (2) 200mg; (1) 500mg; (1) 1g; (2) 2g; (1) 5g; (1) 10g; (2) 20g; (1) 50g; (1) 100g; (2) 200g; (1) 500g; (1) 1,000g

$395

OP-100F2-1000 F2 $450

OP-100F1-1000 F1 $550

OP-100M1-2000 M1 (1) 1mg; (2) 2mg; (1) 5mg; (1) 10mg; (2) 20mg; (1) 50mg; (1) 100mg; (2) 200mg; (1) 500mg; (1) 1g; (2) 2g; (1) 5g; (1) 10g; (2) 20g; (1) 50g; (1) 100g; (2) 200g; (1) 500g; (1) 1,000g; (2) 2,000g

$450

OP-100F2-2000 F2 $550

OP-100F1-2000 F1 $695

OP-100M1-5000 M1

(1) 1kg; (2) 2kg; (1) 5kg

$695

OP-100F2-5000 F2 $795

OP-100F1-5000 F1 $895

OPPL-S Data Logging Software and Wireless Module

Features: Log, save, and print reading with a click of a button Saved log data can be imported to other spreadsheet program such as Excel

Product No. Description Retail

OPPL-S-101 Wired Version $155

OPPL-S-102 Wireless module (1pc to 1 $595

Additional wireless module $295



WEIGH FILL SCALES

S-4 S-4 shown with S-5 Bulk FillSB-20 continuous band sealer

Can be used with bags or rigid containers to pack dry bulk product from powders to parts, 3.5 cu ft supply hopper, readout from 1 gram to .001 lbs, up to 10 lb, One year warranty


S-4 All contact surfaces are stainless steel with powder coated chassis, self-adjusting bulk and dribble speed control, 600-800 fill/hr, 120 volt, 5 amp, .25 cfm

$7,500

PP-1120L Entry level Vertical continuous band sealer Right Feed , ½ HP motor, Dry Ink Coding, Sealing speed 0-315”/min, 8mm wide seal, 11.8” wide conveyor.

Stainless Steel Frame

$5,295

SB-20 Shown in picture above

High Speed / High Quality continuous band sealer with conveyor, left to right feed, sealing speeds of up to 780”/min

$15,550

SB-20 Option Bag Top Trimmer $1,765

S-5 Bulk filling for weights up to 75 lbs, on the fly self adjusting bulk and dribble speed, 300-400 fill/hour.

$6,500



WEIGH FILL SCALES

S-6 Cascading Scale S-7 Dual Scale


S-6 The S-6 is designed to fill harder to run products like crackers, chips and other non-free flowing products. All contact surfaces are stainless steel with powder coated chassis. Cascading feed pan, 24” x 24” hopper (3.5cubic ft) controller range to 10 lbs, 600-800 fill/hr, 120 volt, 5 amp, Air is .25 cfm at 30 psi

$11,750

S-7 Dual lanes for twice the speed, 36” x 24” (5.1 cubic ft) supply hopper can reach twice the speed of a standard S-4 unit. (600-1200 fill/hour)

$14,250

Additional Options: Dribble Feed Gate Increases speed of machine $850

Fill Spouts Made to fit bag size. $195

240 volt Non-Standard voltage $195



X-Ray Inspection Equipment

Model C3 Safeline Model X-33


C3-1006 FDA Concept- 3 X-Ray system is specifically designed for the rapid

automatic inspection of small to medium sized packaged products up to 10” W x 6” H. Includes pusher rejecter

$62,475

C3-1408 FDA Concept- 3 X-Ray system is specifically designed for the rapid

automatic inspection of small to medium sized packaged products up to 14” W x 8” H. Includes pusher rejecter

$74,995

C4-1006 USDA Concept -4 X-Ray system is specifically designed for the rapid automatic inspection of small to medium sized packaged products up to

10” W x 6” H. where environmental conditions require high pressure

and hygienic sanitizing. Includes pusher rejecter

$81,350

C4-1608-USDA Concept -4 X-Ray system is specifically designed for the rapid

automatic inspection of small to medium sized packaged products up to

16” W x 8” H. where environmental conditions require high pressure and hygienic sanitizing. Includes pusher rejecter

$98,175

C5-0609-FDA Concept-5 X-Ray system is specifically designed for the rapid automatic

inspection of jars, bottles, and other tall product up to 9” tall x 6” diameter. Includes pusher rejecter.

$79,275

X-33 Mettler Toledo X-33 Series X-Ray machine is the most advanced X-Ray

machine on the market today with the ability to detect contaminants as small as 0.8mm at speeds up to 250 fpm all while using only 20watts

of power.

Call for Pricing



Band Sealers - Page 5 Paper Banding Machine - Page 7

For more detailed product questions: [email protected]

V-15 4-1-2015 www.amerpkg.com

Conveyors - Page 20

American Packaging 1515 Alvarado Street San Leandro, CA 94577 Phone: 510.877.9000

Label Machines - Page 54 Metal Detectors - Page 57 Poly Bundlers - Page 60

Strapping Machines - Page 73 Vacuum Sealers - Page 87

http://www.excelpackagingequipment.com/Model-1120C-Band-Sealer.html

http://www.excelpackagingequipment.com/PL-211-Top-Labeler.html

Date post:	08-Jul-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

Excel Packaging| 1601 S. Cucamonga Ave., Ontario, CA 91761 | … · American Packaging • 1515...

Documents