l Versatile Machine for drilling - milling & boring operations. l Heavy duty & sturdy machine made with a generous size meehanite casting. l Rated for continuous use & long life expectancy. l Made to accurate engineering tolerances by highly skilled engineers during manufacture.l 3 HP Motor allows larger cuts to be taken during production runs. l R8 spindle allows a large selection of standard tooling to be used.l Automatic stop to up/down feed at the end of the preset travel. l Angular positioning to left/right through worm & gear for ease. l Reversible switch allows the spindle to run clockwise & anti-clockwise. l Centralised one shot lubrication ensures lubrication to all parts that are otherwise inaccessible. l DRO allows you to work in either imperial or metric calibrations. l Hardened slide ways give the machine a much longer production life. l Quill feed at 3 rates of Feed give you the option to select the correct feed to quill to suit your individual production requirements. l Servo type variable & rapid feeds are available for both longitudinal & cross feeds.l Electrically Interlocked spindle guard conforms to the latest CE regulations & health & safety standards.l 3 Axis DRO
Features 2VS & 3VS
Integrated switch panel& DRO
Milling headpivoting ± 45°
Depth stopadjustable
X axis servo type table feed .Continously variable & rapid traverse.
Large base tray
Y and Z axis servo type table feed. Continously variable & rapid traverse.
Included as standard:l Power Feed to Quill – 3 Ratesl Servo Type Longitudinal, Cross & Vertical Feed & Rapidl One Shot Lubricationl Coolant Systeml Electrically Interlocked Spindle Guardl Low Volt Machine Light.
Optional Tooling/Accessories:
Optional Attachments:HMA-R8 Hori. Mill Att. R8 2VS/3VS 1-200-908RAA-R8 Right Angle Att. R8 2VS/3VS 1-200-909PD150 Power Draw Bar 2VS/3VS 1-200-986
l Versatile Machine for drilling - milling & boring operations. l Heavy duty & sturdy machine made with a generous size meehanite casting. l Rated for continuous use & long life expectancy. l Made to accurate engineering tolerances by highly skilled engineers during manufacture.l 3 HP Motor allows larger cuts to be taken during production runs. l R8 spindle allows a large selection of standard tooling to be used.l Automatic stop to up/down feed at the end of the preset travel. l Angular positioning to left/right through worm & gear for ease. l Reversible switch allows the spindle to run clockwise & anti-clockwise. l Centralised one shot lubrication ensures lubrication to all parts that are otherwise inaccessible. l DRO allows you to work in either imperial or metric calibrations. l Hardened slide ways give the machine a much longer production life. l Quill feed at 3 rates of Feed give you the option to select the correct feed to quill to suit your individual production requirements. l Servo type variable & rapid feeds are available for both longitudinal & cross feeds.l Electrically Interlocked spindle guard conforms to the latest CE regulations & health & safety standards.l 3 Axis DRO
Features 4VS & 5VS
Integrated switch panel& DRO
Milling headpivoting ± 45°
Depth stopadjustable
X axis servo type table feed .Continously vari-able & rapid traverse.
Large base tray
.
Z axis Motorised up and down
Y axis servo type table feed. Continously variable & rapid traverse
Optional Attachments:HMA-ISO 40 Hor. Mill. Att. 4VS/5VS 1-200-940RAA-ISO 40 Right Angle Att. 4VS/5VS 1-200-941PD 200 Power Draw Bar 4VS/5VS 1-200-987
l Power Feed to Quill-3 ratel Servo Type Feed & Rapid for Longitudinal & Cross.l Motorised Up & Down Movement l One Shot Lubrication l Coolant Systeml Electrically Interlocked Spindle Guardl Large Size Base Trayl Low Volt Machine Lightl 3 Axis DRO
Included as standard:Electrical Connection 400V. 3ph.50HZTable Size LxW (mm) 1370 x 254 1500 x 305Table Slot Size (mm) 16mm / 3Table Travel (Long) (mm) 920 (820) 1000 (900)Saddle Travel (Cross) (mm) 410 (370) 360 (320)
Knee Travel (Vertical) (mm) 400 380Quill Travel (mm) 127Ram Travel (mm) 470 500Spindle Motor 3.75 kW (5 Hp)Spindle Taper ISO 40Quill Power Feeds (3) 0.04, 0.08, 0.15 mm/rev Spindle Speeds (Rpm) 65 - 3750Spindle to Table (mm) 0 - 400 0 - 350Spindle to Column (mm) 110 - 455 130 - 760Head Tilts L/R ± 90°Head Tilts F/B ± 45°
Dims (LxWxH) cm 255 x 220 x 224 260 x 220 x 230Weight Kg 1590 1700
Specification ETM 4VS ETM 5VS
Excel Turet Mill
See pages 102 - 128
Integrated switch panel& DRO
Milling headpivoting ± 45°
Depth stopadjustable
X axis servo type table feed .Continously variable & rapid traverse.
Large base tray
Y axis servo type table feed. Continously variable & rapid traverse.
Z axis Motorised up and down
Power Feed & DRO reduces travels(X by 100mm)(Y by 40mm)
l Heavy, solid design using premium cast meehanite l Excellent concentricity thanks to tapered roller bearings, better than 0.01mm measured in the spindle sleeve l Automatic spindle sleeve feed l Right and left hand rotation for thread tapping l X and Z axis with adjustable dovetail guide l Coolant System
Features MF 2V :l Y axis with adjustable dovetail guide
MF 4V :l Y axis with flat guide l Large Y axis stroke of 400 mml Motorised table height adjustment with rapid motion (Z axis).
Optional Attachments:
Power Draw Bar 0335-2394
l Power Feed to Quill-3 ratel Servo Type Feed & Rapid for Longitudinal l Up & down Motorised for MF4Vl One Shot Lubrication l Coolant System
Included as standard:
Optional Tooling/Accessories:
l Electrically Interlocked Spindle Guardl Large Size Base Trayl Low Volt Machine Lightl 3 Axis DROl Frequency inverter Siemens
See pages 102 - 128
Electrical Connection 400V. 3ph. 50 HZTotal Connected Load 2.2 kW 4 kW Spindle Drive Motor 1.5 kW 3.0 kW Coolant Pump 100 WDrilling Capacity in Steel Ø 24 mm Ø 32 mmContinous Drilling in Steel Ø 20 mm Ø 28 mm
Face Mill Capacity Ø 76 mm Ø 100 mmEnd Mill Capacity Ø 18 mm Ø 20 mmSpindle Sleeve Travel 127 mm Spindle Taper ISO 40 Din 2080Spindle to Column 213 - 533 mm 200 - 680 mmSpindle Speeds RPM 10 - 5,100 9 - 6,750Gears 6 speed electronic control 8 speed electronic control Head Swivel ± 45° Automatic Spindle Feeds 3 steps 0.04 - 0.15mm/revSpindle to Table 57 - 463 mm 40 - 446 mm
Table Size LxW 1,244 x 230 mm 1,370 x 254 mmCross Table Max Load 230 Kg 275 KgTable T-Slots (size/amount/spacing) 16mm / 3 / 63 X axis Travel (Manual/Automatic) Man. 800 mm /Auto. 730 mm Man. 930 mm / Auto. 850 mmY axis Travel (Manual) Manual 305 mm Manual 400 mm Z axis Travel Manual 406 mm Manual 406 mm/Auto 350 mmDims LxWxH (cm) 140 x 145 x 215 150 x 145 x 220 Weight Kgs 950 1150
