EXCLUSIVE TO ANDREW PAGE! your loCal andrew 0845 602 3436 page branCh or Call us on see pAge 18 To...

AmAzing deAls on big nAme brAnds for cAr & cV workshopsAmAzing de

The new megA wisebUYs is broUghT To YoU bY Andrew pAge

0845 602 3436ContaCt your loCal andrew page branCh or Call us on

see pAge 18 To 20 for deAls

FEEL THE HEAT

see pAges 06 To 10 for besT deAls & spAres

fUll rAnge of heATing from Thermobile

EXCLUSIVE TO ANDREW PAGE!

see pAge 24 for deAls

megAmoUnTeliTe

TYre eQUipmenTsee pAge 27for deAls

inTrodUcing…

January/March 2015

January/March 2015

2 Turn To page 46-47 To find your local branch

MG MOTORS IN ELGIN RACE TO MOT APPROVALWhen Mike Grant of MG Motors in Elgin decided to enter into MOT testing he needed a distributor of MOT equipment and a quality manufacturer to support his plans. After carefully researching the market he teamed up with Niall Farmer from Andrew Page and Richard Blunt from Crypton. Mike commented that he really liked their professional combined approach and were on hand from the initial planning stage to the completed installation. Mike also said “They covered everything from assistance

with the VT01 MOT application form to site meetings with all the tradesman”Mike opted for the scissor lift ATL bay and loves the fact there are no columns and that the lift has a lovely diamond chequer plate finish.

Mike is certainly used to the chequred flag in his favourite pass time of racing. We would like to offer our very best wishes to Mike for putting his faith in Andrew Page and Crypton for his MOT venture.

Mike and Richard discuss the civil works

YOU CAN CONTACT MIkE ON

01343 544 855

The Crypton scissor lift with chequer plated platforms for durability

Mike of MG Motors, Elgin, Scotland.

January/March 2015

3www.andrewpage.com 0845 602 3436

ScoTland regionniall farmer amimiGE SPECiALiSTTEL 07860 [email protected]

norThern regionCALL 0845 602 3436

midlandSCALL 0845 602 3436 SouTh eaSTern regionJohn duckerGE SPECiALiSTTEL 07774 [email protected] SouTh weSTJohn baronGE SPECiALiSTTEL 07771 [email protected] london & home counTieS andy goldupGE SPECiALiSTTEL 07889 [email protected]

conTAcT YoUr locAl gArAge eQUipmenT speciAlisT now

regionAl mAp

January/March 2015

Turn To page 46-47 To find your local branch4

contents6/9 waSTe oil heaTer offerS from Thermobile

10 Thermobile waSTe oil heaTer SpareS, be ready for winTer

11 new range of german Two poST and mid riSe SciSSor lifTS from crypTon

12 new ccp800 crypTon emiSSionS analySer dealS

13 crypTon aTl packageS wiTh emiSSionS analySer and 3 year warranTy

14 fabricaTed JaS STeel workbencheS

14 maJorlifT Jacking beam offerS wiTh 5 year warranTy

15 fpS piSTon & Screw compreSSor range

16/17 karcher winTer cleaning offerS

18 bradbury Two poST hydraulic lifTS

19 bradbury aTl & opTl wiTh 3 year warranTy

20 bradbury Tyre changer balancer offer

21 geT a Spray booTh from dalby

22 launch diagnoSTicS available now

23 lighT up your winTer wiTh elwiS

24 hofmann megaplan premium Tyre equipmenT

25 give yourSelf a lifT wiTh caScoS

26 ring auTomoTive lighTing and charging offerS

27 JbT excluSive andrew page budgeT Tyre changer and balancer offerS

27 feel The impacT of aircaT air ToolS

28 omega Space heaTing and power ToolS

29 Sip workShop equipmenT offerS

30 new range of forTron Service and fluShing equipmenT from SykeS pickavanT

31 STrike a good deal wiTh wilkinSon STar welding and air equipmenT

32 lifTing offerS from TecalemiT

33 wheel and Tyre SpecialS from TecalemiT

34/35 laTeST aTl offerS from TecalemiT

36 new vdo diagnoSTic range from conTinenTal

37 fund you equipmenT purchaSe wiTh kenneT, The ‘loan arranger’

38 greaSe The wheelS wiTh lumaTic lubricaTion equipmenT

39 air Tool offerS from chicago pneumaTic

40 a greaT deal on our faSTeST moving oil drainer from lumaTic

41 alba diagnoSTicS uSeful workShop ToolS

43 our range of imi approved Training courSeS

44 end of SeaSon air con clearance - grab a bargain

45 rock boTTom priceS on clearance lineS - when They’re gone, They’re gone

46/47 find an andrew page branch near you

48 auTo inSider live - don’T miSS ouT on The Trade evenT near you!

January/March 2015


44

22

11 15

38

34/3530

06/09

46/47grab a bargainEND OF SEASON AiR CON CLEARANCE

need a lifT?NEW 2 POST RANGE FROM CRYPTON

launch inTo diagnoSTicSWiTH THE X431PRO3

pump iT up!AiR COMPRESSORS FROM FPS

TeSTing TimeSWiTH THE ATL FROM TECALEMiT

feeling drained?LUBRiCATiON EQUiPMENT FROM LUMATiC

clean up!NEW RANGE OF FLUSHiNG EQUiPMENT

find your local branchUk MAP OF ANDREW PAGE BRANCHES

The heaT iS onTHERMOBiLE

AmAzing deAls on big nAme brAnds for cAr & cV workshops

January/March 2015


Thermobile

oil fired cAbineT heATers

proheAT cAbineT oil fired wiTh flUe connecTion And bUilT-in fUel TAnk

sTAinless sTeel flUe kiTs for cAbineT heATers

sTAinless sTeel flUe kiTs for proheAT models

BSO Models for use with 28 or 35 second heating oil• Complete with thermostat and time control• Complete with oil filter & fire valve• Combustion air inlet kit supplied as standard• Main fan filter kits available for use in

dusty and hazardous applications• Four pass combustion chamber/

heat exchanger assembly provides improved thermal efficiency

• Stainless steel chamber is combined with a high efficiency cross flow tubular heat exchanger to achieve thermal efficiency in excess of 91%

• 13 Models available with heat outputs up to 381Kw (1,300,000 Bthu/hr.)

• Low-noise radial fan• Large air volumes guarantee

quick heating• Equipped with thermostat• Capacities of 42, 64 and 84kW

net, with an efficiency of 91%• Four-sided adjustable outlet opening

guarantees equal air distribution

• Combustion chamber and heat exchanger of heat resistant steel

• Control panel fitted with switches and warning lights

• Equipped with summer/winter circuit for heating or ventilation

• For use with 28 or 35 second heating oil• Electric supply 230 volt 50Hz.

The STD flue kit provides for approximately 4.6 metres (15ft) ground clearance• 3 x 1 Metre flue pipes• 1 x Terminal• 1 x Storm collar• 2 x Adjustable wall fixing brackets• 1 x Silicone rubber pipe flashing & fixing kit

for profiled or corrugated roof & cladding• Minimum flue requirement is 3 metres

The STD flue kit provides for approximately 5.2 metres (17ft) ground clearance• 4 x 1 Metre flue pipes• 1 x Terminal• 2 x Adjustable wall fixing brackets• 1 x High temperature silicone rubber roof seal &

fixing kit for profiled or corrugated roof & cladding.• 1 Tee-Piece (flue to heater)

PART NO. MAX. OUTPUT (Btu/hr) OFFER PRICE 5YR LEASE PW

BSO30 109,000 £2050 £10.88BSO40 146,440 £2150 £11.41BSO60 203,330 £2450 £13.00BSO85 280,530 £2650 £14.07BSO120 418,000 £3199 £16.98

PART NO. MAX. OUTPUT (Btu/hr) OFFER PRICE

FK5 Flue kit for BSO30 & BSO40 £279FK6 Flue kit for BSO60 £289FK7 Flue kit for BSO85 & BSO120 £299

PART NO. MAX. OUTPUT (Btu/hr) OFFER PRICE

FKPH40 Flue kit for PrOHeat40 £259FKPH60 Flue kit for PrOHeat60 £279FKPH80 Flue kit for PrOHeat80 £299

no spAce for A bUlk fUel TAnk? …Then proheAT is YoUr solUTion

PART NO.HEAT

OUTPUT (Btu/hr)

MAX. APROX.

kW

APPROX. FUEL CONSUMPTION

(Ltrs/Hr)

HEATED AIR FLOW

M3/Hr

TANK CAPACITY

(ltrs) OFFER PRICE

5YR LEASE

PW

PrOHeat40 145,200 42 4.7 2,800 55 £2099 £11.14PrOHeat60 221,600 64 7.2 4,500 75 £2399 £12.73PrOHeat80 290,850 84 9.5 5.300 105 £2699 £14.33

January/March 2015


direcT oil fired spAce heATers

heAVY dUTY propAne gAs fired heATers

rAdiAnT hAlogen elecTric heATer

elecTric fAn heATer

infrA-red rAdiAnT oil fired heATers

• Very mobile, economic and highly reliable• Robust, compact design• High efficiency combustion• Stainless steel combustion chamber• Use with paraffin or diesel• Fast temperature rise• Room ventilation is required

• Piezo push button ignition• Thermo couple

flame protection• Safety shutdown

on gas/flame/fan failure & overheat

• Complete with gas hose & regulator

• Room ventilation is required • 3Kw = 10,236 Btu/hr.

• Robust metal design.• 2 Fan Speeds.• Adjustable thermostat• 230 Volt.• Weight 5Kg• Dimensions: L=270mm,

W=260mm, H=360mm

Features:• Photocell flame control• High pressure burner• Spot heating with no airflow• Fuel Gauge• Room ventilation is required

Applications: Motor trade• Workshop personnel heating• Drying and curing in body shopsIndustry• Spot heating in workshops, transit depots and warehouses• Warming up and defrosting machines

• 3Kw = 10,236 Bthu/hr.• Heavy duty construction• Quick to heat and fully portable• 2 Heat settings• Tip over safety cut out• Overheat safety cut out• Carry handle & cord storage• Castors for easy mobility• 220-240 volt• Weight 16Kg• Dimensions: H=89cm,W=55cm,D=49cm

speciAl offer

£179.00Part No: eh0208

speciAl offer

£79.00

Part No: eh1366

PART NO.MAX. HEAT

OUTPUT (Btu/hr)

HEATED AIR FLOW (m³/hr)

APPROXIMATE CONSUMPTION

(Ltrs/Hr)

TANK CAPACITY

(ltrs)

ELECTRIC SUPPLY (Volts)

OFFER PRICE

tC25 92,000 400 2.51 34 230 £299tC40 122,000 900 3.30 41 230 £339

PART NO.HEAT

OUTPUT (Btu/hr)

MAX. APROX.

kW

APPROX. FUEL CONSUMPTION

(Ltrs/Hr)

TANK CAPACITY

(ltrs) DIMENSIONS LxWxH (mm)

OFFER PRICE

5YR LEASE

PW

VaL 6 1SteP 140,000 40 3.7 40 1200x620x930 £1199 £6.29

VaL MIDI 112,000 33 3.3 35 710x660x810 £1099 £5.77IFt 21 70,000 20 1.5 15 530x360x560 £375 -

PART NO.NETT HEAT

OUTPUT (Btu/hr)

HEATED AIR FLOW (m³/hr)

APPROXIMATE CONSUMPTION

(Kg/Hr)

ELECTRIC SUPPLY (Volts)

OFFER PRICE

G17 60,000 500 1.25 230 £115G29 65 - 100,000 800 1.4 - 2.0 230 £169G57 135 - 200,000 2100 2.9 - 4.1 230 £249G81 180 - 270,000 2100 3.9 - 5.6 230 £299

Part No: ifT 21 Part No: val 6 1STep

Part No: val midi

Thermobile

January/March 2015


defra is conducting a review of the guidance on the implementation of

the waste incineration directive (wid) and it’s application to small waste

oil burners (swobs). This is ongoing and no time scale has been set.

• Clean combustion and high efficiency• High capacity air distribution fans• Supplied with manual dial type remote

thermostat and 5 metres of cable• Optional extra is a digital thermostat and time control• Summer ventilation facility• Models SB80 and SB110-package includes motor

and pump kit for connection to bulk fuel tank with bottom outlet and a maximum distance of 15 metres (pipework and electric cable not included). For top outlet bulk tanks and/or distances above 15 metres, a pneumatic pump kit is available at an extra cost

• Complete flue kit provides for approximately 6 metres (19 feet) ground clearance AND NOW includes Roof Seal & Fitting Kit plus two Wall Bands

• Compressed air supply required for burner• Burners adjustable to use heating oil/diesel

IMPORT ANT:In order to burn waste oil, you will need to register with your local authority, there is an initial cost to do this followed by a chargeable annual update license.

All prices on This pAge Are sUpplY onlY Uk mAinlAnd – insTAllATionAVAilAble AT AddiTionAl cosT

model sb40 & sb60

model sb80 & sb110

Also AVAilAble oil & gAs fired sUspended UniT heATers

part no. oFFer prICe 5yr lease prICeSB40Package £3895 £20.67pwSB60Package £4295 £22.80pwSB80Package £6195 £32.88pwSB110Package £6795 £36.07pw

PART NO. HEAT CAPACITY (Btu/hr) AIR MOVEMENT (m³/hr) FUEL TANK (ltrs) FUEL CONSUMPTION (ltrs/hr) COMPRESSED AIR DISPLACEMENT ELECTRIC SUPPLY (volts)

SB40Package 153,000 3200 80 4.6 1 - 1.3 CFM 230

SB60Package 204,000 4100 80 6.0 1.5 - 1.8 CFM 230

SB80Package 306,000 6200 130 9.0 2 - 2.6 CFM 400 + N

SB110Package 436,000 8100 130 12.8 3 - 3.6 CFM 400 + N

TechnicAl dATA

The above packages include a complete flue kit and for models sb80 & 110 a standard motor & pump kit..Additional flue, fire valves, magnetic valves and high pressure filters are available at an additional cost

AUTomATic igniTion wAsTe oil heATers

Thermobile

January/March 2015


Thermobile

mAnUAl igniTion wAsTe oil heATers

cAll 0845 602 3436 or YoUr locAl Andrew pAge brAnch

• High/Low manual heat regulation

• Efficient, clean, virtually soot-free combustion using: used (waste) oil, diesel, heating oil or any combination of these

• All models complete with built-in fuel tank, filters & fuel pump

• Equipped with overflow, overheat and flame failure systems

• AT400 & AT500 incorporate a burner drawer system for easier lighting and cleaning plus a heat exchanger for higher efficiency

• Heaters that have a perforated combustion chamber (models AT306 & AT306THERMO) are not recommended for use in workshops where there are explosive vapours present (i.e. petrol vapour)

• Combustion air intake kits are available for extra safety in garage workshops, either horizontally through an outside wall or vertically taking air into the combustion chamber from two metres above ground level. Except models AT306 and AT306THERMO

• Complete flue kit provides for approximately 6 metres (19 feet) ground clearance AND is legislation compliant PG1/1(04) includes roof seal & fitting kit plus two wall bands.

• Heat capacity: 85,000 Btu/hr min. to 146,000 Btu/hr max.• Fuel consumption: 2,5 Litres/hr min. to 4,3 Litres/hr max.• Fuel tank capacity: 55 Litres• Fan capacity: 3000 m3/hr• Heat exchanger for higher efficiency• Burner drawer system for ease

of lighting & maintenance

• Minimum heat capacity: 68,000 Btu/hr• Maximum heat capacity: 102,000 Btu/hr• Minimum fuel consumption: 2 Litres/hr• Maximum fuel consumption: 3 Litres/hr• Fuel tank capacity: 50 Litres• Fan capacity: 1000 m3/hr

• Minimum heat capacity: 68,000 Btu/hr• Maximum heat capacity: 102,000 Btu/hr• Minimum fuel consumption: 2 Litres/hr• Maximum fuel consumption: 3 Litres/hr• Fuel tank capacity: 50 Litres• Radiant heat only • Minimum heat capacity:

68,000 Btu/hr• Maximum heat capacity:

102,000 Btu/hr• Minimum fuel

consumption: 2 Litres/hr• Maximum fuel

consumption: 3 Litres/hr• Fuel tank capacity: 50 Litres• Fan capacity: 1000 m3/hr

• Heat capacity: 130,000 Btu/hr min. to 210,000 Btu/hr max.• Fuel consumption: 3,8 Litres/hr min. to 6,2 Litres/hr max.• Fuel tank capacity: 55 Litres• Fan capacity: 3000 m3/hr• Heat exchanger for higher efficiency• Burner drawer system for ease

of lighting & maintenance

speciAl offer

£2195.005 year lease from £11.65pw

Part No: aT400package

speciAl offer



speciAl offer


Part No: aT306Thermopackage speciAl offer



AT400 pAckAge

AT500 pAckAge

AT306Thermo pAckAge AT306 pAckAge

AT307 pAckAge

inclUdes

flUe kiT

inclUdes

flUe kiT

AT400 & AT500 AT307 AT306Thermo & AT306

AT307

AT400 & AT500

High capacity axial fan for heat distribution

Closed combustionchamber

Built-in fuel tank

Separate combustion air intake fan - can beconnected to outsidesupply

‘Thermo’ (Standard on AT306THERMO, optional extra on AT306)Fan assisted airdistribution

Perforated combustionchamber (not suitable near explosive vapours)

Built-in fuel tank

AT306/AT306THERMO

Fan assisted airdistribution

Closed combustionchamber

Built-in fuel tank

Separate combustion air intake fan - can beconnected to outsidesupply

sUper bUY!

All prices on This pAge Are sUpplY onlY Uk mAinlAnd – insTAllATionAVAilAble AT AddiTionAl cosT

speciAl offer



January/March 2015


HEAtEr spArEsTemperATUre sensor

combUsTion dish

oil inleT TUbe

drAUghT sTAbiliser for flUe

bUrner ring

combUsTion dish

limiT ThermosTAT wiTh reseT

seAling cord for Top of combUsTion chAmber

seAling cord for combUsTion dish holder

speciAl offer

£12.50*

Part No: 40000167

speciAl offer

£28.50*

Part No: 41900521

speciAl offer

£5.95*

Part No: 41906010

speciAl offer

Part No: 40000238

speciAl offer

£33.00*

Part No: 41900784

speciAl offer

£75.00*

Part No: 41910145

speciAl offer

£16.00*

Part No: 41000206

speciAl offer

£6.38*

Part No: 41900805

speciAl offer

£12.95*

Part No: 41910196

All AT Models

AT302/303/305/306 & 307

AT306/307

All AT and SB Models

Models AT303/307/400 & 500

Models AT400/AT500

Models AT303/307/400 & 500

AT400/500

*THERMOBILE SPARES PRICES MAY BE SUBJECT TO A CARRIAGE CHARGE PLEASE CHECK WHEN ORDERING

£32.50*

Thermobile

Models AT303/AT306THERMO/AT307/AT400/AT500

January/March 2015


electro-mechanical 2 post lift - 3 tonne• Suitable for lifting passenger cars, car derived vans and many light commercial vehicles• Telescopic asymmetric arms provide optimal door clearance to access the vehicle interior• Two synchronised motors ensure perfect balance of both lifting columns • Adjustable height and width structure• Baseless frame• Low lifting point

crYpTon

crYpTon - TAking YoU To new heighTs

hydraulic 2 post lift - 4.5 tonne• A top quality hydraulic two-post lift• Suitable for lifting cars and light commercial vehicles• Overhead gantry with an automatic shut off sensor• Electro-magnetic locking system• Adjustable lowering speed for safe lifting and lowering• Telescopic asymmetric arms provide optimal door clearance to access the vehicle interior• Low lifting point

3YEAR

WARRANTY!3YEAR

WARRANTY!

Crypton • a Brand of the Contnental Corporation

• Made in Germany - Rely on quality, strength and reliability

• The lifts achieve quality and strength by thoughtful design and applying the latest manufacturing techniques, such as folded steel beams, resulting in increased strength and eliminating potential corrosion found in conventional welded structures• 2-Post lifts manufactured with hard chrome cylinders and galvanised covers • Low maintenance costs• Long service life

part no: c2l3000e

OUR SPECIAL OFFER!

£2795LEASE FROM £14.84 PER WEEK

3YEAR

WARRANTY!

part no: c2l4500h

OUR SPECIAL OFFER!


part no: cml3000

OUR SPECIAL OFFER!


portable mid rise lift - 3 tonne• For underbody servicing, painting and bodywork repair• Lifts vehicles to a comfortable 1 metre lifting height• Covers a large range of activities• Portable lift with the optional ‘Mobile-Set’• Suitable for garages that need the ability to shift their work areas around• Can be installed without permanent mounting on most flat surfaces• Easy and quick set-up

Winter Warmer 2014 - A4.indd 1 12/12/2014 12:38:04

January/March 2015


3YeAr wArrAnTY

MARkET LEADER

AS USED bY NATIONAL FAST FITSThe Crypton 800 series emission analyser is DVSA approved for MOT testing.

The CCP800 series is an integrated gas and smoke analyser combining state of the art digital technology.

The unit comes complete with the following as standard:

• Oil temperature probe

• Battery RPM measurement (petrol & diesel)

• Colour A4 printer

• 23” IBA Widescreen monitor

• All housed in a high quality roll-around cabinet

• Ergonomic, space-saving design

• Integral keyboard cover for dust/grease protection

A2C95212000 800 SERIES EMISSIONS ANALYSER CABLED VERSION £4250.00 £22.56

A2C95214000 800 SERIES EMISSIONS ANALYSER BLUETOOTH VERSION £4850.00 £25.74

A2C87760800 5 YR TOTAL CARE PACKAGE INCLUDING VOSA UPDATES £2950.00 £15.15

PART NO. DESCRIPTION PRICE PRICE PW

crYpTon


January/March 2015


Choose your lift Take your pick between a class iV or class Vii package and select the lift that is most suited to your needs. 4 Post OR scissor.

Once you’ve selected our emissions analyser, this will be the heart of your ATL bay, then go ahead and pick your brake tester, headlamp aligner, mirrors and jacking beam.

If you can’t find what you are looking for, call us on 0113 397 0210 and our specialist team will assist.

ATV Class IV – NEW LOWER PRICESDescription

*Class IV Pit Package (excl pit)

*Class iV 4 Post ATL PkG 4t, 4.5m

*Class iV Scissor ATL PkG 4t, 4.6m

Part No.

CPL740-C-EN560

C4L741-C-EN560

CTL740-C-EN560

Offer price 5 year lease

£17,999

£22,999

£23,999

£95.53

£122.07

£127.38

ATV Class VII – NEW LOWER PRICESDescription

*Class VII Pit Package (excl pit)

*Class Vii 4 Post ATL PkG 5t, 5.7m

*Class Vii Scissor STL PkG 5t, 5.5m

Part No.

CPL770-C-EN560

C4L773-C-EN560

CTL773-C-EN560

Offer price 5 year lease

£21,999

£24,999

£28,195

£116.76

£132.69

£151.26

ALL ThE ABOVE LISTEd ARE AVAILABLE wITh OPTIONAL ExTRA BRAkE TESTER RECESS STEEL FRAME - ENABLES EASIER ANd MORE ACCuRATE RECESS FABRICATION - £399 FOR CLASS IV, £449 FOR CLASS VII * wIRELESS EMiSSiONS AVAiLABLE FOR ADDiTiONAL £500

all our aTl packageS include a combined emiSSionS analySer

free on siTe sUrVeY

3 YeAr wArrAnTY free brAke TesTer frAme!

crYpTon


January/March 2015


STEEL TOP WORkbENCHES

MObILE STEEL bENCHES

Heavy duty workbenches are fully welded (not flat pack)• Constructed from steel angle with braced galvanized tops or 45mm timber top. Super

heavy duty with galvanized steel on top of 45mm timber also available• All benches come with bottom shelf and cupboard with vice plate welded underneath

Other sizes available, normal height 840mm.

Other sizes available, normal height 840mm. Wood/steel worktops also available at additional cost!

PART NO. LENGTH X WIDTH DESCRIPTION PRICE

1260SC 1200mm x 600mm Steel top £269



sTATic workbenches – sTeel workTops

PART NO. LENGTH X WIDTH DESCRIPTION PRICE

1260SCP 1200mm x 600mm Steel top with Cupboard £359

1575SCP 1500mm x 750mm Steel top with Cupboard £379

mobile workbenches

proUd To be Uk designed And

mAnUfAcTUred

proUd To be Uk designed And

mAnUfAcTUred

JAcking beAmshigher And wider AT no eXTrA cosT!2.0 TONNE FOR CLASS 4 MOT TESTiNG2.8 TONNE FOR CLASS 7 MOT TESTiNG

feaTureS• Top beam now a massive 1700m/m wide fitted as standard• Pressure relief valve [prevents overloading]• Hose burst valves [avoids accidental lowering]• Support arms tailor made to suit all makes of lift• Easy glide rollers, permits smooth running along lift platform• Range of extra accessories to fit onto top beam, which will increase lifting safety

mAJorlifT

Part No: hpJ2 (2T)

£749.00

£1099.00

Part No: hpJ28 (2.8T)

JAs

• Choice of manual or air/hydraulic operation

• All Majorlift products are manufactured in our high tech factory in Gloucestershire with 95% of the product made in house

• We are a BS EN ISO 9001;2008 registered company

• 5 YEAR WARRANTY (Subject to 3 year servicing intervals to comply with H&S regulations)

raiSer blockS• Universal fitting suitable for all

makes of jacking beam

• Rubber non slip exterior which moulds to your customer’s vehicle underbody allowing you to work in total confidence

• Light, strong and easy to use

5YrwArrAnTY

5 year lease from £5.84pw

part no. description price per pair1590l 120x230x140mm (hxwxd) £63.001590M 70x200x100mm (hxwxd) £33.001590s 40x200x100mm (hxwxd) £25.001590 Full set £98.00

January/March 2015

www.andrewpage.com 0845 602 3436

15

fini nUAir

Part No. Model CFM (disp.)

Receiver ltr Phase HP Bar Offer Price Per

weekS-28Da504FPS032 NB2800B/50/3M tech 12.5 50 Single 2.2 10 £375.00 -

S-28Fa504FPS009 NB2800B/100/3M tech 12.5 100 Single 2.2 10 £375.00 -

S-28Ha504FPS051 NB2800B/150/3M tech 12.5 150 Single 2.2 10 £435.00 -

S-36HN504FPS012 NB38C/150 FM3 13.95 150 Single 3.0 10 £475.00 -

S-36LN504FPS014 NB38C/200 FM3 13.95 200 Single 3.0 10 £495.00 -

S-36NW505FPS038 NB38/270 tD tandem 27.9 270 Single 2 x 3.0 10 £1,395.00 £7.41

S-36HN541FPS013 NB38C/150 Ft3 13.95 150 three 3.0 10 £475.00 -

S-36LN541FPS015 NB38C/200 Ft3 13.95 200 three 3.0 10 £495.00 -

S-N7LN701FPS044 NB7/200 Ft 5 26.7 200 three 5.5 10 £695.00 -

S-N7NN801FPS018 NB7/270 Ft 7 29.7 270 three 7.5 10 £895.00 -

S-N1NN905FPS019 NB10/270 Ft 10 38.1 270 three 10.0 10 £1,395.00 £7.40

belt driven lubricated – Tech & blue star seriesProfessional and heavy duty, low speed workshop compressors.

Features

• 13 Amp, single & 3 phase models

• 230 and 400 Volts

• Fully automatic operation on all Tech series

• 3-10HP

• 50, 100, 150, 200 & 270 Ltr receivers

• Tandem models available

• Higher capacities

• Reduced RPM

• 2 Year warranty (T & Cs apply)

• Star Delta starting on 10 HP model

belt driven lubricated – pulsar concept silencedHigher output 3 phase professional silenced compressors offering capacity from 17 Cfm (disp.)

Features

• Three phase models

• 270 & 500 Litre receivers

• Floor mounted version available

• Noise levels as low as 69 dB(A)

• 4 to 10HP

• Star Delta starting available


• Refrigerated dryer options available

Part No. Model CFM (disp.)


week

BZNt601FNN040Pulsar Concept Se BK114-270F-4

17.0 270 three 4 10 £1,895.00 £10.06

BrNt701FPS031Pulsar Concept Se BK119-270F-5.5

23.8 270 three 5.5 10 £2,095.00 £11.12

BrNt701FNN224Pulsar Concept Se BK119-270F-7.5

29.7 270 three 7.5 10 £2,295.00 £12.19

Bttt905FNM953Pulsar Concept BK120-500F-10 SD

38.2 500 three 10 10 £3,395.00 £18.03

Part No. Model CFM (FAD)


weekF-V77Jt60FNM301 MICrO Se 310 M -200 10.2 200 Single 3 10 £2,395.00 £12.72

F-V77JQ72FNM001 MICrO Se 410-200 13.6 200 three 4 10 £2,495.00 £13.25

F-V77JP72FNM301 MICrO Se 510-200 17.1 200 three 5.5 10 £2,595.00 £13.78

F-V77JO92FNM301 MICrO ta 710-200 22.9 200 three 7.5 10 £2,695.00 £14.31

F-V91NH92FNM001 QUaDrO 1010-270F 35.3 270 three 10 10 £3,495.00 £18.56

F-V91NM92FNM001 QUaDrO 1510-270F 53.0 270 three 15 10 £3,695.00 £19.62

F-V83NQ92FNM001 QUaDrO 2010-500F 65.3 500 three 20 10 £4,395.00 £23.34

F-V83NY92FNM001 QUaDrO 2110-500F 72.4 500 three 20 10 £4,695.00 £24.93

micro & Quadro series - rotary screw compressorsBelt driven screw compressor from 2.2 to 15 kW

Features• Noise levels as low as 58 dB(A

• 12,000 Hour Poly-V belts

• Higher capacities

• Floor, tank mounted & tank mounted with dryer options.

• Star Delta starting from 5.5 kW

• Electronic controller from 5.5 kW

• 8 & 10 Bar as standard

• 13 Bar available on floor mounted


• Refrigerated dryer option

Vision series - rotary screw compressorsBelt driven screw compressors

from 7.5 to 22 kW

Features

• Noise levels as low as 62 dB(A)

• Modular design – floor, receiver mounted and receiver mounted with dryer

• Fixed speed drive

• 12,000 Hour Poly-V belts

• 8, 10 & 13 Bar options

• Lower service costs

• EasyTronic IV electronic controller

• Star Delta starting on all models

• Lower noise Levels

• Refrigerated dryer option

Part No. Model CFM (FAD)


weekF-V91SH92FNM001 VISION 1010-270F 35 270 three 10 10 £3,995.00 £21.21

F-V91SP92FNM001 VISION 1510-270F 53 270 three 15 10 £4,195.00 £22.28

F-V83SS92FNM001 VISION 2010-500F 65 500 three 20 10 £4,695.00 £24.93

F-V83SV92FNM001 VISION 2510-500F 88 500 three 25 10 £5,695.00 £30.24

F-V83SY92FNM001 VISION 3010-500F 106 500 three 30 10 £5,995.00 £31.83

free on-siTe commissioning

free on-siTe commissioning

January/March 2015


kÄrcher

HOT WATER & STEAM CLEANER

Part No: 11692190

£1399.00

MODEL hdS6/12C

PRESSURE 30-120 bar

WATER FLOW 240-560 litres/hour

POWER 3.0kw (240V)

Kärcher’s HDS 6/12 C is a powerful hot water high-pressure cleaner with steam function, ideal for medium duty cleaning of vehicles, machinery and yards. Featuring eco!efficiency mode for up to 20% fuel savings compared with previous models. The HDS 6/12 C delivers detergent at high pressure for a more powerful clean and features a servo-control on the gun for convenient water pressure/flow adjustment.

COLD WATER PRESSURE WASHERKärcher’s HD 6/13 C Plus is a compact and powerful high pressure cleaner designed for the demanding cleaning requirements of the automotive industry. High water flow and pressure ensure thorough cleaning results even when tackling the most stubborn dirt. With variable water pressure, triple nozzle and Dirtblaster nozzle as standard, this machine offers high performance cleaning producing fantastic results and quick turnarounds.

Part No: 15201620

£459.00MODEL hd6/13 C Plus

PRESSURE 170 bar


POWER 2.9kw (240V)

high performAnce

HOT WATER & STEAM CLEANERKärcher’s heavy-duty hot water high-pressure cleaner with steam function provides high levels of performance, reliability and economy. Featuring eco!efficiency mode for up to 20% fuel savings, 4-pole motor and machine protector system for prolonged service life. Ideal for cleaning commercial vehicles, machinery and yards.

leAse from £10.08pw Part No: 10774110

£1899.00

MODEL hdS7/10-4M

PRESSURE 30-100 bar


POWER 3.1kw (240V)

besT selling mAchine

MACHINE TRAINING ANDSERvICE CONTRACTS

AvAILABLE. ASk FOR DETAILS.

COLD WATER PRESSURE WASHERKärcher’s entry level professional pressure washer offers a new level of performance and durability compared to domestic machines. With stainless steel lance, three-piston axial pump, brass water inlet and cylinder head for long service life. Features triple nozzle (0°/25°/40°) as standard.

MODEL hd5/11C

PRESSURE 130 bar

WATER FLOW 500 litres/hour

POWER 2.2kw (240V) Part No: 15201180

£319.00

leAse from £7.43pw

UsUAl price £339.95

heAVY dUTY

Includes foam spray bottle & 2.5L Active Vehicle Wash detergent (worth £99)

MACHINE TRAINING ANDSERvICE CONTRACTS

AvAILABLE. ASk FOR DETAILS.

January/March 2015


kÄrcher

ADV DRY VACUUM CLEANERDesigned for professional use, the T 10/1 vacuum cleaner is equally at home cleaning carpeted areas, hard surfaces or vehicle interiors. This high performance dry vacuum cleaner can be used with or without a bag thanks to its high suction power. Features include an anti-static suction tube bend and an easy replacement 12m mains cable.

MODEL T10/1 Adv

CAPACITY 10 litres

AIR VOLUME 61 litres/sec

POWER 1100w (240V) Part No: 15274110

£79.95

MULTI-PURPOSE VACUUM CLEANERUnlike many wet or dry vacuum cleaners, kärcher’s xpert Vac features a superior filtration system allowing the operator to switch between wet or dry pick up without changing or damaging the filter. ideal for cleaning vehicle interiors or workshop spills. The perfect solution to quickly and easily remove the rain or melted snow and ice that can create a safety hazard in your workshop during the winter months.

PRO VALETING MACHINEkärcher’s Puzzi 10/1 spray extraction machine is designed for easy and efficient deep cleaning of upholstery, carpets and textile flooring and ideal for vehicle valeting. With a powerful 1 bar spray rate, the water and detergent solution is applied to the area being cleaned and picked up immediately by the flexible suction nozzle leaving only minimal residual moisture. Also includes hand tool for vehicle interiors and spot cleaning.

Part No: 95321990

£149.95

Part No: 11001320

£399.00

MODEL Puzzi 10/1

VACUUM 220 mbar

AIR FLOW 54 litres/sec

FRESH DIRTY/TANK 10/9 litres

MODEL Xpert NT 360

CAPACITY 35 litres

WATER FLOW 200 mbar

POWER 1380w (240V)

HEAVY DUTY FLOOR CLEANERkärcher’s BR 40/10 heavy duty scrubber drier makes cleaning small to medium hard floors easy, delivering outstanding results and helping to keep your workshop safe and compliant with VOSA regulations. Featuring twin counter-rotating brushes and twin rubber squeegees, the BR 40/10 cleans and dries hard floors in a single pass. By turning the vacuum system off, the machine can be used for deep cleaning of heavily soiled areas.

MODEL BR 40/10 C Adv

WORKING WIDTH 400 mm

FRESH/DIRTY TANK 10/10 litres

POWER 1400w (240V) leAse from £6.89pw Part No: 96217920

£1299.00

UsUAl price £89.95



January/March 2015


brAdbUrY

HyDRAuLIC BASELESS DESCRIPTION WEIGHT HEIGHT PHASE OFFER PRICE 5 yEAR LEASE

H2403G 2 POSt LIFt WItH GaNtrY 4 tONNe 4000MM 3 PHaSe £2995 £15.90


H2403HG 2 POSt LIFt WItH HIGH GaNtrY 4 tONNe 4400MM 3 PHaSe £3295 £17.50




aH100 100MM HIGH LIFt PaDS - - - £259 -



January/March 2015


brAdbUrY

CLASS 4 ATL BAy PART NO:

DESCRIPTION 4 TONNE PLATFORM LENGTH

BRAkE TESTER #

JACkING BEAM

OFFER PRICE 5 yEAR LEASE FROM

atL4H4403atLXL LONGeSt CLaSS 4 atL LIFt ON MarKet YeS 4780 Or 5280MM 1040atL 2 tONNe £22995 £122.85

atL4H4403atLSr FItS INtO 99% OF eXIStING reCeSSeS YeS 4345 Or 4845MM 1040atL 2 tONNe £21895 £116.21

atL4H4403atLSL FItS INtO MaNY eXIStING reCeSSeS YeS 4354 Or 4845MM 1040atL 2 tONNe £21895 £116.21

CLASS 4 & 7 ATL BAy PART NO:

DESCRIPTION WEIGHT PLATFORM LENGTH

BRAkE TESTER#

JACkING BEAM


atL7H4653atLLWB HeaVIeSt & LONGeSt atL LIFt ON MarKet 6.5 tONNe 6185 Or 6685MM 1070atL 2.8 tONNe £30995 £164.51

atL7H4523atLLWB LONGeSt atL LIFt ON MarKet 5.2 tONNe 6185 Or 6685MM 1070atL 2.8 tONNe £28795 £152.84

atL7H4483atLLWB FItS INtO MaNY eXIStING reCeSSeS 4 tONNe 5600 Or 6100MM 1070atL 2.8 tONNe £25995 £137.97

atL7H4483atL SPaCe SaVING CLaSS 7 LIFt Or eXtra LONG CLaSS 4 4.8 tONNe 5450/5950MM 1070atL 2.8 tONNe £24495 £130.01

OPTL OFFER PART NO:

DESCRIPTION WEIGHT PLATFORM LENGTH

BRAkE TESTER

JACkING BEAM


H4403atLSL - OPtLUP OPtL UPGraDe (NO BraKe teSter) 4 tONNe 4360MM NO 2 tONNe £12499 £66.34

*Warranty is subject to the equipment being serviced at the recommended intervals and the equipment is used in accordance with manufacturers guidelines.

January/March 2015


brAdbUrY

TyRE EquIPMENT DESCRIPTION WEIGHT OFFER PRICE 5 yEAR LEASE FROM

WC5301aa + WC5521 tYre CHaNGer & WHeeL BaLaNCer PaCKaGe - £2595 £13.78

WC55301aa tYre CHaNGer WItH aSSISt arM - £1850 £9.82

WC5521 eLeCtrONIC WHeeL BaLaNCer - £1395 £7.41

MECHANICAL 2 POST LIFTS

DESCRIPTION WEIGHT OFFER PRICE 5 yEAR LEASE FROM

M2903CD 2 POSt LIFt WItH BaSe 3 tONNe £2395 £12.72

M2933 2 POSt LIFt WItH GaNtrY 3 tONNe £3095 £16.43

SCISSOR LIFTS DESCRIPTION WEIGHT OFFER PRICE 5 yEAR LEASE FROM

H8603e reCeSSeD LIFt, 3 PHaSe 3.6 tONNe £3495 £18.56

H8601e reCeSSeD LIFt, SINGLe PHaSe 3.6 tONNe £3595 £19.09

H8903e LOW PrOFILe SUrFaCe MOUNteD, 3 PHaSe 3.2 tONNe £3495 £18.56

H8901e LOW PrOFILe SUrFaCe MOUNteD, SINGLe PHaSe 3.2 tONNe £3595 £19.09

M2903/CD 3.0 Tonne Two Post Electro-Mechanical LiftFeatures• M2903 - Shaft drive• M2903CD - Chain drive• Safety nut• Automatic arm locking device• Dead man controls, 24 volt• Buzzer on last portion of descent stroke• Electro-mechanical safety device• Automatic lubrication• Complete with 60mm and 100mm pad height adaptors• Suitable for workshops with a low ceiling or roof• Reliable tried and tested quality design• Good all round purpose lift suitable for lifting small and large cars and up to car derived vans

M2933 3.0 tonne two post electro-mechanical liftFeatures• Twin motor• Nut breakage system• Cold-rolled spindle for very long life• Digitally controlled safety features• Anti-trap toe protection alarm when lowering• Posts are made of strong, hot rolled profiled steel• Electronic synchronisation system• Mechanical safety device• Automatic arm locking system• Double telescopic arms• Large adjustable screw lifting pads• Optional extras include a large range of high lift pads

• Hydraulically synchronised platforms.• Easy to handle run on/run off ramps.• Pneumatic mechanical safety locking system

• Hydraulic parachute safety valve• 3 Phase & single phase options• Includes delivery & installation

PACKAGE INCLUDESWC5301AA - Fully Automatic Tyre Changer with Assist Arm• Allows independents/MOT workshops to change low profile tyres)• 12” - 23” Outside diameter clamping.• 14” - 26” Inside diameter clamping.• Operating pressure: 8-10 bar (116-145 psi)

WC5521 - Electronic Wheel Balancer• Motorised machine designed for budget tyre workshops.• Rim width measuring caliper• Wheel weight pliers/hammer• 4 x Standard cones

Both pieces of equipment are single phase.

sAVing £650!

January/March 2015


dAlbY

TALK TO THE EXPERTS–TALK

TO DALBY

AVAilAble from sTock for QUick & eAsY self-bUild INSTALLATION • FULLY DETAILED INSTRUCTION BOOKLET PROVIDED • DEDICATED INSTALLATION HELPLINE

finAnce pAckAges AVAilAble from £55.70 pw (sUbJecT To sTATUs)fUllY insTAlled pAckAges from £13,495+VAT

whY bUY A cheAp booTh when YoU cAn bUY A QUAliTY low cosT booTh from The nAme YoU cAn TrUsT?

a revoluTionary deSign concepT

from The uk’S leading name

in Spray booThS

from £10,495.00 +VAT

proUd To be Uk designed And mAnUfAcTUred

EASYbOOTH• 7M long x 3.9M wide x 2.4M high cabin,

fits into almost any workshop• Spray & bake with full re-circulation facility to 80°C• Surface mounted with rear extraction chest (no pits required)• Fully assembled extraction system & heating

plant for quick & easy installation• Plug & socket wiring system – 2 hour total wiring time• Double skin front & doors with durable pre-

coated polyester white finish• Running costs of less than £2.50/hr (natural gas)• Ducting package included• Suitable for use with water based paints• Booths available from stock for quick & easy self-build installation• Detailed installation instructions provided• Dedicated installation helpline• Fully certificated and compliant with all current Health &

Safety & Environment Protection Act requirements

• Perfect finishing environment

• Quick & easy installation

• Will fit into almost any workshop

• Quality Assured BS EN 9001

• Running costs of less than £2.50/hr

you really

install your own

IN LESS THAN 2 DAYS!

canquality

spray booth

yes

TALK TO THE EXPERTS–TALK

TO DALBY

install your own

IN LESS THAN 2 DAYS!

canquality

spray quality

spray quality

booth

you reallyyes

January/March 2015


lAUnch LAUNCH Uk

X431 PRO III X431 PROThe Launch X431 Pro iii has been designed to connect vehicles and workshops, using wireless and bluetooth connectivity. A built-in social network service enables users to connect to a community for help with diagnosis, while remote diagnosis is possible with golo option. Users also have access to a car database and repair tips, allowing for faster and more efficient performance.

oTher feaTureS of The pro 3 include:• Full system diagnosis• Data stream storage and re-display• Coding, reset and programming functions• Online technical support and advice• Real time diagnosis for golo users• Special functions for specific manufacturers

X431 Pro III technical specifications:• 10.1 Inch, 1280x800 resolution touch screen• Quad core processor running at 1.2Ghz.• 1 GB Of RAM• 8 GB On board storage.• 16 Core GPU• 3.7v Ultra-long life battery 6600 mAh.• 0.3 Megapixel front camera, 3.2 Megapixel rear camera• Android 4.0 OS

OUR SPECIAL OFFER!


The CReader Pro CRP129 is the most up-to-date vehicle fault diagnosis tool in Launch’s line of handheld diagnostic tools. don’t let its size mislead you, the CReader Pro is a state-of-the-art tool and with innovative new designs in both its hardware and software it is one of the most reliable and accessible diagnosis tools on the market today.

key feaTureS:• MIL Indicator• Multiple car models (Over 40 prevalent

models from Asia, America & Europe)• Record, save and playback up to 8 hours of live data• I/M Readiness test• Enhanced data stream for ABS, SRS, transmission & engine.• Malfunction lamp status• Read vehicle information• O2 (Lambda) sensor test• Auto-vehicle ID, auto module search & ultra-fast protocol ID• EVAP System test• View live diagnostic data in graph or data format• View multiple data streams at the same time• View freeze frame data• Read current, pending and permanent DTC’s• Clear DTC’s• Support DTCs help, data stream wave displayFree internet updatesEnhanced help functionPrint data via PC

CRP 129

OUR SPECIAL OFFER!

£269

for YoUr on siTe demo, cAll 0845 602 3436 now

Part No: crp 129 Part No: x431 pro iii

Part No: x431 pro

As with all Launch diagnostic tools, the Pro covers a wide range of car models including European, Asian, American and Chinese. it also has a range of powerful test functions and provides extremely accurate test data.

oTher feaTureS of ThiS Tool include:• High configuration software that allows for high operating speeds• A multi-touch, tablet-style capacitor screen for quick, smooth use• Portable size makes it easy to use and transport• Brand new interface that’s much more user friendly• Users can install any Android software• Also has photo, video and multimedia functions,

as well as other software applications• Can graph live data when in use• Module coding, resets, relearns and

bi-directional capabilities also possible

now onlY! £1195

leAse from £6.34pw

700S7 ”S7”• Slim flashlight.• 2 x Duracell AAA batteries.• 2W CREE LED offering 110 lumens.• Pocket size.• Lanyard & clip.• Gift box.• IP65RRP £17.99

speciAl offer price

£14.99Part No: 700S7

700H1 “H1” • High specification headlamp• Optimized beam for large working area• 3 x Duracell AAA batteries• 3W LED with 2 light output modes • Unique fingerscrew tightens tilt• Super-lightweight, only 129g• 260 lumens• IP44RRP £29.99

speciAl offer price

£24.99Part No: 700h1

18310B “PF4” • Cordless SMD LED handlamp• 3 x SMD LEDs Offering 160 lumens• 3.5 Hours burn time. 2.5 hours charge• FLEX function for multi-position use• Mini USB charging cable included• Base magnet• Metal hook• IP20RRP £27.99

speciAl offer price

£21.99Part No: 18310b

January/March 2015


elwis

ELWIS C SERIES PROFESSIONAL COb LED HAND LAMPS• Innovative danish design hand lamps that set new standards for the durability of a high specification COB LED lamp.

• designed to provide a powerful and bright light output offering the professional a very convenient working light.

• The use of a wide beam angle makes C Series lamps capable of lighting up a large work area.• New design with stronger magnet.

14020B "C1" • Professional, cordless, hand lamp• 3W COB LED Offering 300 lumens.• 3.5 Hour burn time / 4 hour charge• 230V UK charger belt clip • Gift box• Rubberized ABS • Rear magnet • IP 54RRP £34.99

speciAl offer price

£29.95Part No: 14020b

14025B “C2” • Professional, cordless, hand lamp• 3W COB LED Offering 300 lumens• 4 Hour burn time / 4 hour charge• Flex function• Rubberized ABS base magnet • 12V Cigar charger • 230V UK Charger • Durable hook • Gift box• IP 54RRP £42.99

speciAl offer price

£34.99Part No: 14025b

14026B “C3” • Professional, cordless, mini hand lamp• 1.2W COB LED offering 120 lumens.• Rubberized ABS rear & base magnet • 3 our burn time / 4 hour charge.• 230V UK Charger • USB Charger • Belt clip • Gift box• IP 54RRP £24.99

speciAl offer price

£19.99Part No: 14026b

14027B “C4”• Professional, cordless, hand lamp• 3W COB LED Offering 300 lumens• 4 Hour burn time / 4 hour charge• Flex function• Docking station • Rubberized ABS • Base magnet • 230V UK Charger • Durable hook• Gift box• IP 54RRP £51.49

speciAl offer price

£39.99Part No: 14027b

60100 ”PF9”• High performance headlamp with battery holder at front.• Compact and lightweight. Fits easily into a pocket.• Adjustable beam angle up to 90 degrees.• 3W CREE LED offering 120 lumens.• 2 Light output settings – 50% & 100%.• Beam distance up to 150m.• Fitted with zoom function.• 3 x AAA (included).• IP44RRP £18.99

speciAl offer price

£15.99Part No: 60100

January/March 2015


hofmAnn megAplAn

UlTimATe TYre eQUipmenTmegaspin 420• Super automatic 3d operation using Sonar• world’s first balancer with ‘NO ChECkSPIN’ technology• Easier 6 O’clock position for weight application• Laser-guided weight placement• Automatic locking into position for weight application• handles rims up to 30” in diameter• The simplest and fastest balancer ever produced• 3 Year PCB warranty

£3,395

megamount elite• Premium quality, high performance tyre changer• 12” to 26” Clamping (24” external) • unique (patented) bead breaker with Run-Flat/standard settings• ‘megafit 2 xL’ assist arm for handling Run Flats etc• Industrial design with tapered column for max strength• Tool/valve storage box with built-in air gauge• Available in conventional lever or leverless versions

premiUm TYre eQUipmenTExceptional build quality and suitable for high volume use.

designed for those garages and tyre shops where, quite simply, only the best will do. A traditional build quality and focus on being ‘future-proof’ make these an excellent investment for those looking for reliability and performance long term.

megaspin 200-2 • 2d/3d Automatic operation • Compact yet capable in any environment• handles rims up to 30” in diameter• Simple and speedy operation• 3 Year PCB warranty

£1,995

megamount 503 racing • Premium quality, high performance tyre changer• 10” to 24” Clamping (22” external) • ‘megafit 2 xL’ assist arm for handling Run-Flats etc

£2,995

BuY ANY ChANGER & BALANCER PACkAGE ANd geT a niTrogen inflaTion SySTem half priceNG90 Fully Auto - only £495 OR NG90-4 Fully Auto with 4 Outlets - only £595

megamount elite Super (leverless)

£5,395

megamount eliteStandard lever

£3,995

ecoline Series• Autodata database for comprehensive vehicle coverage• Customer printout• 19” Colour monitor• Call for a demonstration

ecoline 58 with traditional 4-point clamps

only £3,495ecoline 88 with 3-point ‘GrabClamps’ and even faster operation

only £5,495

megaline Ssence Series• Autodata database for comprehensive vehicle coverage• Customer printout• unrivalled software for speed and simplicity

megaline Ssence 400 Semi-automatic operation and 19” colour monitor

only £7,995megaline Ssence 600 Fully-automatic camera operation and 32” colour monitor

only £9,995

wheel AlignmenT

• Call for a demonstration

ith traditional 4-point clamps

ith 3-point ‘GrabClamps’

5 Year lease from £18.03pw 5 Year lease from £28.65pw 5 Year lease from £21.21pw

5 Year lease from £10.59pw







January/March 2015


hofmAnn megAplAn

cAscos Vehicle lifTsdo you want a lift that lasts like your old one did?cascos have been manufacturing lifts in Spain since 1965.in all that time, very little has changed about the way a Cascos is made, because Cascos have resisted the temptation to reduce costs by cutting corners. Essentially, a Cascos is the closest thing you will find to the lifts of the past that seemed to last forever!

To celebrate 50 Years, we are pleased to offer a model that we consider to be the most traditionally built and versatile lift on the market today. Just compare these features...

Solid steel profiles for the columns offer up to 60% more strength than those made from folded sheet steel, allowing us to use a much slimmer column, thus reducing footprint of the lift and increasing working area between the columns

Rubber buffers on inside of column ensure safe door opening

Useful tool trays located in all 4 arms

Triple-stage arms maximise minimum and maximum capacity for pick-up pointsSymmetric Arms enable bi-directional loading

of the vehicle, drive-on or reverse on

Unique arm locks use a spindle rod rather than a typical cog-style, giving universal positioning for the pick-up points and longer life

Storage device for an impact gun and sockets

ALL CASCOS LIFTS COME WITH AN UNRIVALLED

5 YeArWARRANTY*CONDITIONS APPLY

c3.5xl ‘50 Series’ - Two post lift, with base, 3500kg capacity - £3,995c3.5xl ‘50 Series Synchro’ - Two post lift, baseless, 3500kg capacity - £4,295

oTher modelS availablec2.32 - Two post lift, with base, 3200kg capacity - £2,995c2.32 Synchro - Two post lift, baseless, 3200kg capacity - £3,295

prices include delivery by two engineers on company-owned transport, and installation to a prepared site, plus free courtesy check within 3 months of installation.

example priceS c443 + ecoline 58 computerised alignerFlat-platform, 4.8m, 4000kg, four post lift and fully computerised aligner, ideal step up from laser alignment capacity

£9,995c445 + megaline Ssence 400 3d alignerFlat-platform, 4.8m, 4000kg, four post lift and fully computerised aligner, ideal step up from laser alignment capacity

£13,995

unbeatable ‘alignment bay’ packagesWe can offer a huge selection of lift and alignment options using the Cascos and Hofmann Megaplan range.• One supplier installs the whole package, eliminating any compatability issues• Industry leading alignment technology combined with one of the world’s longest serving lift manufacturers• Expert engineers see through whole installation from delivery to comprehensive on-site training

BaSeLeSS VerSION aLSO aVaILaBLe WItH OVerHeaD GaNtrY Or UNDerFLOOr CaBLe

5 Year lease from £21.21pw5 Year lease from £22.81pw





c125 Single post lift• Solid steel column profile• Industrial strength spindle & nut mechanism• Ideal for small garages or areas unable to accomodate a 2 post• 2500kg Lifting capacity• Exceeds Eu specifications & directives

£3,495 (3ph) £3,695 (1ph)5 Year lease from £18.56pw 5 Year lease from £19.62pw

Quick release or telescopic (double screw) extensions eliminate the need for costly and time-consuming optional extra pads

January/March 2015


ring

RIL4000 – Ultra Bright Magnetic Flexible Inspection Lamp• Rechargeable and cordless• New technology Strip LED provides a light output 4x brighter than the equivalent standard LED lamp• Provides a wide angle, uniform illumination LED torch function• Magnets for hands free use• Multi-positioning for directional lighting• 2 x Integral hanging hooks• Lithium ion battery for faster consistent recharging• Anti slip comfortable grip• Includes AC mains charger and 12v DC charging lead

Part No: ril4000

RT5185 – Hazard Safe ATEX LED Inspection Torch• Intrinsically safe for use in hazardous locations• Waterproof construction• Virtually unbreakable polycarbonate lens

Part No: rT5185

RT5197 - Ring Slimline LED Torch• 70 Lumens, beam distance 65m, white LED• High-low-off• Slim line design with clip• Spot to flood beam

Part No: rT5197

RPPM3000 – 3000A Metal TradeStart Power Pack• 12/24V, 3000A Professional metal cased power pack for car & commercial retailers, fleet operators and service engineers• Jump starts up to 5.5 litre truck engines • Heavy duty sealed lead acid batteries with up to 4 year service life• Battery status indicators• Reverse polarity warning buzzer and indicator

Part No: rppm3000

RSCPR50 - 12v, 2-50A SmartChargePro• 12v, 2-50A Programmable 8 stage battery smart charger with multiple charge rate settings• Multi-chemistry function to set the specific charge required for different battery types• Power supply function maintains the battery voltage when appliances connected and drawing power • Includes LCD display

Part No: rScpr50

RCBT35 – TradeCharge 35• Professional 35A metal cased bench charger with 180A jump starter• Selectable outputs for 12V and 24V vehicles • Dual charge rate settings with analogue ammeter• Rugged metal casing with high capacity cable and battery clamps• Suitable for intensive use in garages, workshops and commercial vehicle depots

Part No: rcbT35

OUR SPECIAL OFFER!

£23.95

OUR SPECIAL OFFER!

£89.95

OUR SPECIAL OFFER!

£229.95

OUR SPECIAL OFFER!

£42.95

OUR SPECIAL OFFER!

£249.95

OUR SPECIAL OFFER!

£6.50

oUr speciAl offers

Part No: rScpr50

January/March 2015


UNIVERSAL

AIR TOOLS

UniVersAl Air Tools

AIRCAT® Composite 3/4” Twin Hammer Impact Wrench 1,400 (ft-lb) Loosening torque. Best suited for bus/large automotive use, large agricultural service vehicles,large bolt assembly work4,500 RPM (Free speed) 85 dBa. (Decibels) 7.9 Lbs. (Net weight)“Super clutch mechanism” 2 Year parts & labor warrantyPart No: AC1600-Th

AIRCAT® Composite Super Clutch 1/2” Twin Hammer Impact Wrench 1,000 (ft-lb) Loosening torque. Great for general maintenance work.

85 dBa. (Decibels) 4.3 lbs. (Net Weight)

8,000 RPM (Free speed),

1,300 BPM (Under load)

2 Year parts & labor warranty Part No: AC1000-Th

£399.00 £179.00

NITROCAT® “Mini” Composite 3/8” “Xtreme Torque” Twin Hammer Impact Wrench 700 (ft-lb) Loosening torque. Patented quiet tuned exhaust. Great for brake calipers,transmission work. patented easy operation flip lever forward & reverse.10,000 RPM (Free speed), 1,750 BPM (Under load) 85 dBa. (Decibels) 2.7 Lbs.2 Year parts & labor warrantyPart No: AC1355-xl

NITROCAT® “Mini” Composite 1/2” “Xtreme Torque” Twin Hammer Impact Wrench 900 (ft-lb) Loosening torque. 1,750 blows per minute.

Great for brake calipers,transmission work.

85 dBa. (Decibels) 2.9 lbs. (Net weight)

Dark grey body, ergonomic handle design

2 Year parts & labor warrantyPart No: AC1375-xl

£199.00£199.00

JbT

Motorised Wheel Balancer• Smooth, quiet motorised operation• Italian design & traditional build quality• Premium quality 40mm balancing hardware• 2 Year warranty (1 year full, 1 year parts)

Part No: JbT1500

This incredible ‘JBT’ package has been created exclusively for Andrew Page by market leaders in tyre equipment, hofmann Megaplan. The JBT range is designed to meet the budgets of those looking for an economical route into tyres, without the risk associated with buying ‘budget’ brands. Expert training and long term support from an established and well respected supplier are examples of the assurances you have when you invest in this very well spec’d, uk-assembled equipment.

Fully-Automatic Tyre Changer with Assist Arm• 10” to 24” Clamping range (22” external)• Includes robotic assist arm for handling run-flat etc• Traditional European design and build quality• 2 Year warranty (1 year full, 1 year parts)

Part No: JbT201

OUR SPECIAL OFFER!


OUR SPECIAL OFFER!


By…pAckAgedeAl!

bUY boTh for JUsT5 YeAr leAse from £14.31 £2695 SAVING

£395

January/March 2015


omegA

INDUSTRIAL HEATERS DIESEL / kEROSENE

HRD70Heater output = 70,000 BtU ( 20.52KW)Fuel consumption = 1.7kg/htank size = 24Ltrair output = 600m3/h

HRD100Heater output = 100,000 BtU ( 29.31KW)Fuel consumption = 2.5kg/htank size = 24Ltrair output = 720 m3/h

speciAl offer

£229.00

Part No: hrd70

speciAl offer

£249.00

Part No: hrd100

INDUSTRIAL GAS HEATERS / LPG

speciAl offer

£89.00

Part No: hrp42

speciAl offer

£129.00

Part No: hrp100

HRP42Heater output = 42,000 BtU (12.31KW)Fuel consumption = 0.74kg/hair output = 320 m3/h

HRP100Heater output = 100,000 BtU (29.31KW)Fuel consumption = 2.18kg/hair output = 650 m3/h

Features:-• Portable air heater• Fuel type propane gas ( LPG )• Fitted with over heating protection• Safety cut off against gas leakage• Electric ignition ( Piezo )• Includes regulator & 1.5m hose

Features:-• Mobile air heater• Fuel type diesel or kerosene• Stainless steel combustion chamber with fan cooling• Built in flame sensor• Automatic heater cut off when fuel is low• Oil display unit• Cut off safety protection

Cordless Impact Wrench• 18V Interchangeable li-ion battery• No-load speed 0-1800/r.p.m• Max. torque 6000kg-cm/588 N.m/430ft-lb• Tool weight (with battery) 3kg (battery 0.53kg)• Capacity 1/2” (13mm)• Charging time 1 hour auto cut off• Inc. 2 batteries

Cordless Impact Wrench• 18V Interchangeable li-ion battery• No-load speed 0-2000/r.p.m• Max.torque 2450kg-cm/240 N.m/177ft-lb• Tool weight (with battery) 2kg (battery 0.53kg)• Capacity 3/8” (10mm)• Charging time 60-70 minutes auto cut off

speciAl offer

£379.00

Part No: m2033

speciAl offer

£289.00

Part No: m2038

IMPACT WRENCHES

January/March 2015


sip

500kg TrAnsmission JAck• Lifting capacity 500kg• Min. Height 1175mm• Max. Height 1995mm• Oversized foot pedal for easy lifting• Knurled air release valve• Spring loaded pressure released valve• Convenient foot pedal liftingPart No: 03871mw1

rescUe pAc 1600• Output voltage/s 12v• Battery capacity 22Ah• Boost peak rate 1600amp• Cranking rate 700amp• 12v DC output socket• LED Charge indicators• Cable length 800mmPart No: 03936mw1

sTAr bUY!

• Lithium ion (LiFePO4) 20Ah battery with 800amp peak rate - superior stability and higher cycle life than conventional batteries or most other Lithium batteries• Super powerful yet compact and lightweight - can be stored in a glovebox• Suitable for up to 5 litre petrol and 3.5 litre diesel engines• Laptop charging function• 2x USB (5v) Outputs - Safely charge a variety of electronic equipment• 12v DC Output style socket for use with a range of 12v equipment• LCD Status display shows battery charge level and mode functions• Test function for testing alternator and battery status• Integrated LED work lights• Complete with laptop adaptor set, AC charger, in-car charger, jump cable with heavy duty connector, test input cable, and high quality carry case with adjustable strap• Lightweight - just over 1kg

Part No: 03972mw1

pro boosTer 800li mUlTi-fUncTionAl boosTer And power pAck

AirmATe Tn3/100-d• 230v (13amp) Supply• 100 Litres air receiver size• 3.0hp (2.2kW) Motor• 14.0 CFM (397 litres/min) Piston displacement• 9.5 CFM (269 litres/min) Max. free air delivery (F.A.D.)• Cast iron barrel• Smooth ‘V-Twin’ aluminium pump• Wheel mounted for improved manoeuvrabilityPart No: 05299mw1

onlY £320.00

onlY £99.00

onlY £135.00

onlY £179.00

NEW!

AUToplUs 180sT mig welder• 230v (25amp) Supply• Dual purpose for welding with or without gas• 6 Power settings• Very high duty cycle: 145amp @ 15%• 30amp Low current performance for easy welding on thin bodywork• Variable wire spool size capability to accept 5kg and 15kg spools• Turbo fan cooled for increased duty cycle• Wheel mounted for excellent manoeuvrability

AUToplUs 210sT mig welder• 230v (35amp) Supply • Dual purpose for welding with or without gas• 6 Power settings• Very high duty cycle: 175amp @ 15%• 30amp Low current performance for easy welding on thin bodywork• Variable wire spool size capability to accept 5kg and 15kg spools• Turbo fan cooled for increased duty cycle• Wheel mounted for excellent manoeuvrability

part no: 05720part no: 05718

OUR SPECIAL OFFER!

£469.98

OUR SPECIAL OFFER!

£399.98

NEW! NEW!

hi-Tech plAsmA cUTTer - 230 VolTPlasma 46 is ideal for fast and accurate clean cutting. Lightweight with a superb duty cycle the Plasma 46 is great for cutting a variety of materials such as steel, stainless steel, copper, bronze and aluminium. Average air consumption - 150 l/min.Accessories included; Regulator and 4 meter air cooled torch.05502 Precision engineered replacement torch.• Euro MIG Torch (EP15)• Rating: 180amp @ 60% duty cycle• Cable/connection: 3 metres/Euro

part no: 05175

OUR SPECIAL OFFER!

£435.95

January/March 2015


sYkes pickAVAnT

serVice pro eQUipmenT rAngea new range of professional service stations to provide a quick and efficient way of servicing fluid systems

Fortron Coolant Flush Machine• Suitable for all types of coolants and vehicles• Includes a set of multi-application adaptor fittings• Effective way of flushing and exchanging the complete cooling system fluid• Air operated and portable

Part No: 53401500 OUR

SPECIAL OFFER!


SCAN THE qR CODE TO SEE THIS IN ACTION

Fortron Automatic Transmission Fluid Flush Machine – Fully Auto• Can replace up to 100% of transmission fluid• Ability to specify exact amount of fluid to change• Fully automatic and user friendly• Includes comprehensive adaptor set and Flush Service Kit• Safely cleans up and extends the service life of automatic transmissions

Part No: 53402500

OUR SPECIAL OFFER!



ATF Flush Service Kit• Includes bottle of Automatic Transmission Flush and tube of Auto Trans & Power Steering Concentrate

£11.49 Fortron Injector Max Machine• Suitable for petrol and diesel engines• Cleans the complete fluid systems without disturbing/removing any key components• Includes comprehensive adaptor set and Injector Max fluids - petrol & diesel• Air operated

Part No: 53403500


Injector Max Premix Solvent – Petrol

£17.99Part No: 53403600

Injector Max Premix Solvent – Diesel

£17.99Part No: 53403700

Fortron Power Steering Flush Machine• Replaces 100% of steering fluid• Takes on average 10 minutes per service• Extends the service life of (often overlooked) system• Revitalises and conditions ‘o’ rings and seals• Portable, sturdy design• Includes power steering flush service kit

Part No: 53404500

OUR SPECIAL OFFER!

£995Power Steering Flush Service Kit• Includes bottle of Power Steering Flush and 50ml tube of Auto Trans & Power Steering Concentrate

£11.49 Part No: 53404600

Part No: 53402600


inclUdes comprehensiVe AdApTor seT

OUR SPECIAL OFFER!


January/March 2015


wilkinson sTAr

WELDINGeUrosTAr 200Excellent weld performance• Easy to use• Euro torch connection• Suitable for steel, stainless, aluminium and MIG brazing• Includes 3mtr Euro connect torch, gas regulator • Current range 30-200A

onlY £495.00

Part No: Zxeuro 200

AIRworkhorse belT driVe compressors Workhorse Compressors provide more than just air – it’s dependable air delivery, designed and built to the highest European standards for heavy use

• Cast iron cylinder blocks on all models• Slow running pump speeds giving lower noise levels & longer life expectancy• Air receivers built to latest European standards 09/105 CE• Heavy duty industrial motors c/w overload protection• Twin cylinder pumps • Fitted after coolers • 2 Year warranty

model hp Air receiVer liTres

displAcemenTcfm

fAd cfm elecTricAl phAse

dimensionslxwxh price

fiAc workhorse belT driVe 230V (model picTUred wr3hp-50p)

wr3hp-50p 3 50 13 9 1 1010x360x730 £425

wr3hp-100p 3 100 13 9 1 1100x400x830 £455

fiAc workhorse belT driVe 400V

wr5.5hp-200s 5.5 200 21 17 3 1520x480x940 £875

fiAc TAndem belT driVe 230V

wrT28-250s* 2 X 3 250 26 18 1 1750x480x1100 £995

eUrosTAr 318• Easy to use• 10 Voltage settings• High power 4 roll drive• Suitable for steel, stainless, aluminium • Torch trigger latching, spot timer, burn back control• Includes 3mtr Euro connect torch, gas regulator • Current range 30-340A

onlY £895.00

Part No: Zxeuro 318

fiAc rUbber Air hose• BS5118/2• 20 bar Working pressure• 60 bar Burst pressure, 290 psi

onlY £12.95

onlY £19.95

Part No: ahr10m516

Part No: ahr20m516

10 Mtr x 5/16” hose c/w ¼” bsp fittings

20 Mtr x 5/16” hose c/w ¼” bsp fittings

All models maximum pressure 145 PSI/10 bar

Part No: wh04b

Part No: wh04fl onlY £34.95

onlY

£49.95 • Delay – Variable 0.1 to 0.8 secs• Lightweight nylon shell• Large viewing area• 2 Arc sensors

sTArpArTs AUTo dArkening welding helmeTs

January/March 2015


TecAlemiT

• General purpose service lift• Suitable for cars and car

derived vans up to long wheelbase vans (6T)

• Low access height• Mechanical and hydraulic

safety systems• Audible warning on descent

SF9250 SuPPLIED WITH 300kG TRANSMISSION JACk (WHILE STOCkS LAST)

PART NO. DESCRIPTION PRICE PER WEEk

SF9436/Sr FOUr POSt LIFt 3PH 3.5 tONNe £4,495.00 £23.87

SF9004 FOUr POSt LIFt 3PH 4.0 tONNe £4,995.00 £26.52

SF9084 FOUr POSt LIFt 3PH 4.0 tONNe £5,295.00 £28.12

SF9250 FOUr POSt LIFt 3PH 5.0 tONNe (5.2M) £6,995.00 £37.14

SF8976 FOUr POSt LIFt 3PH 6.0 tONNe (6.0M) £8,195.00 £43.52

SF9265/N FOUr POSt LIFt 3PH 5.0 tONNe MOt - NON atL (6.5M) £8,995.00 £47.76

• Suitable for lifting most passenger cars and car derived vans

• Automatic arm locking• 5 Year warranty on self-lubricating

Nylatron operating and safety nuts• Low minimum lifting pad height of

just 95mm• Foot/toe protection device fitted to

lifting arms

Combined Smoke Meter & 4 Gas Analyser• VOSA Approved for all classes of MOT testing • 1 Year manufacturers warranty • Mobile cabinet • A4 Printer• 1 Single annual calibration for both smoke and 4 gas• integral DiSpeed 492 engine RPM measurement • PC Operating platform • Large 19” flat screen monitor• Options include diagnostic modules part no: Tgd/mdS/1

OUR SPECIAL OFFER!


1 year Service & calibraTion package

TecalemiT emiSSionS analySerS, only one calibraTion per year on boTh peTrol & dieSel

3.0t Short Platform low riSe SciSSor lift - Sf 9130/Sikey features• 3.0t Lifting capacity• Low profile access of 95mm• Maximum working height of platforms 930mm• Electro-hydraulic operation• Fast lifting time of 30 seconds• Suitable for use in fast fits & tyre shops• Extendable lifting platforms• 1 Phase power supply

TROLLEY MOUNTED OUR SPECIAL OFFER!


part no: Sf9130/Si

4 posT lifTs

2 posT lifTs

emissions

part no: Sf9010/32

OUR SPECIAL OFFER!

£2695LEASE FROM £14.31PER WEEK

ALSO AVAILABLE 3.2 TONNE

sUper deAl!

deliVered for cUsTomer insTAllATion

Emission Analyser with 5 Year Total Care Package from £43.52 per week

Ts deAdeAde l!

geT This keepower bATTerY chArger

free!

part no: Sf8909

OUR SPECIAL OFFER!


2.8 TONNE

January/March 2015


TecAlemiT

OUR SPECIAL OFFER!


Automatic Tyre Changer• Pneumatic high pressure bead breaker• Pneumatic locking system for operating arm• 2 Direction turntable• Pneumatically controlled tilting column for improved accessibility• Extended clamping jaws for improved operation• ideal for working with run flats

part no: TTc/Tiro/1

wheel & TYre eQUipmenTElectronic Wheel Balancer• Suitable for balancing most types of car and car derived van wheels• Simple control panel for ease of use• LED Display• Foot brake

part no: Tbm/Tiro/2500

OUR SPECIAL OFFER!


Wheel Alignment• 4 Wheel laser alignment • Low ground clearance avoids fouling of front spoilers• Wall mounted or trolley mounted versions available• Rapid operation with ‘hang on’ heads• wheels from 12-23”

PACkAGE DEAL 1PROFESSIONAL RANGE

BUY BOTH TBM/TIRO/2500 & TTC/TIRO/1 TOGETHER FOR

ONLY £14.31 per week

£2695SAVE £395

OUR SPECIAL OFFER!


Automatic Tyre Changer• Extra height column to accommodate wheels up to 16” wide• Re-designed chassis allows increased overall wheel diameter of 46”• increased internal rim clamping of up to 23”• Re-designed double acting bead breaker blade for working on wider / larger wheels• improved roller design for run flat tyres• Technohelp arm fitted to make tyre changing even easier and minimise risk of damage to tyres

part no: TTc200/Th

Automatic Wheel Balancer• Automatic wheel balancer with data entry

• Split weight system

• Double LED display

• Wheel width measurement gauge

• Self diagnosis and user calibration for simple maintenance

• 5 ALU Programs plus static and standard programs

• Foot brake for locking the wheel

part no: Tbm200

OUR SPECIAL OFFER!


Self diagnosis and user calibration for

PACkAGE DEAL 2PROFESSIONAL RANGEBUY BOTH TTC200/TH & TBM200 TOGETHER FOR ONLY £21.74 per week

£4095SAVE £595

WALL MOUNTED OUR SPECIAL OFFER!


part no: gTr400w

OUR SPECIAL OFFER!

£425

part no: gTr400cTd

CASTOR CAMBER GAUGEPACkAGE DEAL 3

PROFESSIONAL RANGEBUY BOTH GTR400W &

GTR400CTD TOGETHER FOR ONLY £10.59 per week

£1995SAVE £125

• Built in turn disc for caster swing measurement (digital turn disc in CTd version)• Simultaneous dual axis measurements• Plus & minus 45 degree measurement• Magnetic adaptor for easy hub mounting• 0.1 Degree resolution• Auto power off

January/March 2015


TecAlemiT

free

2 YeArwArrAnTY

clAss iV

from £103.52 pw

SPECIAL OFFER £19,495

Part No: aTl/iv/poST

clAss Vii

from £122.10 pw

SPECIAL OFFER £22,995

Part No: aTl/vii/poST5

cAll 0845 602 3436 now for deTAilsinclUdes A free siTe sUrVeY And drAwing To

AssisT YoU wiTh YoUr VosA ApplicATion

ATl pAckAges

insTAlled,

cAlibrATed

& cerTified

bY TecAlemiT

fAcTorY TrAined

engineers

NEED EMISSIONS?

emiSSion upgrade

£3899when

purchaSed wiTh an aTl

package5yr leaSe form

£20.70pw. 2yr warranTy.Part No: mdS/2

UTILISING BRAKE TESTER DISPLAY

January/March 2015


TecAlemiT

JUsT look AT whAT YoU geT…

CLASS IV CLASS VIIPart No: aTl/iv/poST Part No: aTl/vii/poST5

4 Post, 4 Tonne vehicle lift complete with turning plates, play detectors,

2000kg jacking beam, 4500mm platform length, 3 phase, roller brake tester with intergrated weighing and

ATL functionality, single bed, 3 phase, rail mounted headlamp aligner

WITH 2 YEAR WARRANTY

4 Post, 5 Tonne vehicle lift complete with turning plates, play detectors,

3000kg jacking beam, 5700mm platform length, 3 phase roller brake tester with intergrated weighing and

ATL functionality, single bed, 3 phase, rail mounted headlamp aligner

WITH 2 YEAR WARRANTY

EASY SELF ASSEMBLY

FRAME 1800mm HEIGHT

HOLSTER

DIGITAL HOSE END METER

DRIP TRAY

HEAVY DUTY STEEL BUND

SUPPLIED WITH 2m AIR INLET

HOSE COMPLETE WITH AIR COUPLER

10m 1/2” HOSE

STEEL RECOIL REEL

3:1 PNEUMATIC PUMP

2” BUNG ADAPTER

STEEL RISER TUBE FOR 205L DRUMS

NON RETURN VALVE

FILTER

2 DRUM STAND

STEEL GRILL

MOVEABLE WITH PALLET TRUCK OR

FORK LIFT 2100mm x 2100mm BASE

OUR SPECIAL OFFER!


Part No: LA738/COMP

2 drUm reel

sTAnd

key Features:• Cable tidy system (lift)

• robust steel workstation containing PC, printer & screen

• electronic brake tester LeD display

• Flush fitting hydraulic play detectors

• electronic decelerometer

• towing socket tester

• MOT Ancillary & sign pack

LUbRICATION STATION

January/March 2015


Vdo AUTodiAgnos

Vci(UniT onlY)

£1995Only £10.47pw on

a 5 year lease

Vdo diAgnosTics

AUTodiAgnos VciThe all-rounder for every workshop offers solutions for every conceivable variant of vehicle diagnostics. This multifunctional diagnostics solution was developed to satisfy the extensive demands placed in the service area.

in combination with the simple, intuitively operated Autodiagnos DSi computer software, the vehicle interface is capable of turning your PC into a powerful diagnostic tool by communicating with any Windows PC via a modern, secure WLAN connection.

Also, remain up-to-date with the ContiSys Update Plus software updating service.

Basic functions:

• Automatic identification of control units

• Read and delete fault memory

• Read/record/reproduce current data and measured values

• Address components

• EOBd Modes

• Guided troubleshooting (haynesPro VESA)

• Technical bulletins (haynesPro SmartFix)

Complete with:

• Carry case

• One year of free ContiSys data software updates

• Online updates

• Extended software updates (optional)

• Large vehicle coverage

• 3 Year warranty

• Touchpad (optional)

MuLTI-FuNCTIONAL dIAGNOSTICS SOLuTION wITh AuTOdIAGNOS VCI

haynespro veSa (vehicle electronics Smart assistant)

• Intelligent, step-by-step diagnostics

• helps mechanics to diagnose fault codes and component errors

• Generates component diagrams

• Automatically generates diagnostic solutions

haynespro SmartfixTm

• Diagnose and repair common faults

• Covers a wide range of vehicles

• Technical service bulletins and recall data

3YEAR WARRANTY!

Vdo AUTodiAgnos

Vci + pAnAsonic ToUghbook

£3750Only £19.91pw on

a 5 year leaseVDO • a Brand of the Contnental Corporation

NEW!

WiTH iNTEGRATED GUiDED DiAGNOSTiCS

Part No: a2c93600500 Part No: a2c95588500

January/March 2015


do YoU need To inVesT in new gArAge eQUipmenT? if so, hAVe

YoU considered leAsing iT?Lease repayments are fixed for the full duration of the term (excl VAT). All lease payments are subject to tax relief - see

samples below. Increase your cash flow to use for other profitable activities. 1, 2, 3, 4 and 5 year lease packages available to suit your business needs. Let the equipment pay for itself, as it earns for itself. Minimum or nil deposit packages available.

2 YeAr leAse

leAse Term 2 YeArsweeklY pAYmenT £23.30firsT pAYmenT £100.9523 monThlY pAYmenTs £100.95ToTAl cosT £2,422.79

TAX relief @ 20% £484.56neT cosT of finAnce £1,938.23

3 YeAr leAse



4 YeAr leAse



5 YeAr leAse



eQUipmenT VAlUe (eX VAT) £1,999.00

All payments shown are subject to businesses trading in excess of 3 years, status and Vat. New start businesses may require a higher rate. The tax relief shown is for illustration purposes only. For further information regarding leasing options please contact Tony Devenney on 01675 469 208. Andrew Page are regulated by the Financial Conduct Authority (FCA) reference number 496906.

kenneT leAsing

January/March 2015


chicAgo pneUmATic

feaTureSMax torque 610Nm (450 ft-lbs)Working torque 138-420Nm (102-310 ft-lbs)Best power to weight ratio 450 ft-lbs. / 610 NmUltra compact 4.4 in. / 112 mm longEasy to use One hand operation trigger by either left or right handed users, 3 settings in both directionsDurable impact mechanism housing made of steel and aluminiumRugged and lightweight Steel front cover and aluminium body, 1.3kg (2.86 lbs)

oUrspeciAl offer

£109.95Part No: cp7732

1/2” sTUbbY impAcT wrench

UlTrA compAcT

Standard waste oil drainer• 76 Litre capacity• Low pressure compressed air discharge 0.5 bar• Large capacity 20 litre drain bowl• Oversize anti splash funnel and filter• Drain bowl height adjustment• Vacuum facility for dip stick tube evacuation• Set of six extraction probes• Adaptors for BMW, Mercedes, Vw & Citroen• Graduated oil inspection chamber• Oil resistant wheels• Removable tool tray• Level gauge with shroud protection• discharge hose c/w hooked nozzle • Comfy grip handle

part no: ge24176

OUR SPECIAL OFFER!

£199

oil dispensing kits for engine, gear and hydraulic oilsThe kit includes:• 01 x 3;1 Ratio air operated pump 27 l/p/m

• 01 x Cased hose reel c/w 9m x ½” hose

• 01 x Standard oil gun c/w anti drip nozzle

OUR SPECIAL OFFER!

£349

OUR SPECIAL OFFER!

£349

kit for 205 litre drumspart no: ge82009

kit for 4’ high Tankspart no: ge2125kTank

To suit 12.5kg grease kegsThis model comes with a carrying handle onlypart no: ge13020

To suit 50kg grease kegsThis model comes with a trolley as per the picturepart no: ge13050

OUR SPECIAL OFFER!

£249

OUR SPECIAL OFFER!

£249

for all purchases of the grease or oil kits we will supply free 1 x 5 litre measure with screw cap

for all purchases of the grease or oil kits we will supply litre measure with screw cap

lUmATic

air operated grease pump kits• High pressure air operated • 50:1 Ratio grease pump • 800 grams per minute delivery• Drum cover• Follower plate• 4 metre high pressure • Delivery hose• Control valve with Z-swivel

January/March 2015


Features• Pinless closed reinforced rocking

dog impact mechanism• Socket retainer ring combined

with hole retainer• Regulator with integrated forward

reverse with 3 position power settings in both directions

Benefits• High efficiency motor• High power for the toughest of jobs

max Torque reverse: 2600nm

part no: cp7782-6

OUR SPECIAL OFFER!

£389.95

Features• dYNA-PACT Oil bath clutch• One handed push button forward/ reverse with 4 positive power settings• Full power in reverse• Comfortable contoured handle grip

Benefits• Smoothest operating tool with unmatched durability


part no: cp772h

OUR SPECIAL OFFER!

£99.95

Features• One handed push button forward/

reverse with 4 positive power settings• Full power in reverse• Compact and ergonomic with

rubber handle cover

Benefits• Smoothest operating tool with

unmatched durability


part no: cp734h

OUR SPECIAL OFFER!

£149.95

Features• Handle in composite material• universal & durable twin hammer mechanism• Full teasing ergonomically developed trigger• 360

o Air inlet swivel

Benefits• Reduced operator fatigue• Extremely fast rundown for quick work max Torque reverse: 1250nm

part no: cp7748

OUR SPECIAL OFFER!

£299.95

Features• i nsulating and lightweight composite handle• Side to side easy forward/reverse• Full teasing trigger• Low air consumption motor

Benefits• Productive and lightweight tool• Low air consumption results

in energy savings


part no: cp7769

OUR SPECIAL OFFER!

£319.95

OUR SPECIAL OFFER!

£99.95

OUR SPECIAL OFFER!

£149.95OUR

SPECIAL OFFER!

£299.95

OUR SPECIAL OFFER!

£319.95

impAcTwrenches1/2” impAcT wrench

1/2” impAcT wrench

1” impAcT wrench



besT prices!

chicAgo pneUmATic

January/March 2015


combinATion wAsTe oil drAiner

onlY

£229.00

Part No: ge25076

Oversized Funnel andAnti-Splash Filter

Large Capacity 20 LitreDrain Bowl with Swivel

Comfort Grip Handle

Removable Tool Tray complete with three Dipstick Tube Adaptors to suit Merc, BMW, VW & Citroen Models

5 x 700mm & 1 x 1000mm Dipstick Probes

Dipstick Probes Holster

Pressure Discharge SafetyValve Set at 1bar

Discharge Hose with Handleand Hooked End

Strengthened Oil ResistantWheels & Casters

Adjustable FunnelHeight Adjuster on

Lockable Tube

New Design Low NoiseVacuum Pump

Compressed Air ConnectionPoint with Shut Off Valve &

Pressure Gauge. Only 0.5 Barrequired to discharge the oil

Dipstick Waste OilSuction Facility

Large 76 Litre Capacity Tank

Level Gauge with ShroudProtection

When using the Vacuum Suction facility you do not need a permanent Compressed Air Connection. Once the Vacuum has been created, the drainer will work autonomously anywhere. One charge of Vacuum will allow you to suck the oil from several vehicles or until the tank is approximately 66% Full.

greAT deAl!

lUmATic

January/March 2015

www.andrewpage.com 0845 602 3436

41

AlbA

• For the safe and quick removal & installation of GEN2 type Hub Bearings• Reduces risk of damage to ABS sensor rings• Specially designed centre alignment adaptor to ensure perfect alignment when re-fitting bearings• Hydraulic upgrade option available

Applications: • VAG ( 72mm ) - Audi A1, Audi A2, Seat Cordoba, Seat Ibiza, Skoda Fabia, Skoda Roomster, VW Polo, VW Touran • Ford / Volvo ( 78mm ) - Ford Focus II, Ford C-Max, Mazda 3, Volvo C30, Volvo C70, S40, V50 • Ford / LR / Volvo ( 82mm ) - Mondeo 2007 on, Galaxy, S-Max 2006 on, Land Rover Freelander 2 2006 on, Volvo S80, V70, XC60, XC70 2006 on

HUb & bEARING REMOVER / INSTALLER SET

- Audi A1, Audi A2, Seat Cordoba, Seat Ibiza, Skoda Fabia,

Part No: alb40215

£749.00

• Full fluid change can be completed by a single operator in approx. 15 minutes• Portable: operates off 12v supply (vehicle battery)• Capacity 1.25Ltrs• Supplied with ALB30564B multi vehicle cap adaptor kit• Suitable for clutch bleed as well as brake bleed

• Includes FREE ALB30630 10PCS Pro Brake Service Kit

PRESSURE bRAkE bLEEDER

• Suitable for clutch bleed as well as brake bleed

Part No: alb560Tk

£335.00

• Tests – Starter, grounding contact & alternator • Tests a wide range of batteries including: AGM, VRLA, SMF, GEL etc • Print & save own branded results to PC via USB link, ideal for giving to customers • Reports easily customised • Extremely fast, accurate & consistent results • Illuminated LED display

• Includes FREE ALB30719 Maxi Current Tester 30amp

bATTERY TESTER

Part No: alb40034cT

£198.00

• Auto levelling upper arms allow the machine to work easily on both conical & misaligned springs • Cylinder made from light alloy & nylon resin with fiberglass to avoid corrosion & oxidation• Foot-pedal works only when the safety valve is closed • Supplied with small & large jaws & strut vice• Working pressure: Min 6 bar - max 10 bar• Cylinder stroke: 330 mm • Ideal for working on conical, side load & heavy duty springs

HEAVY DUTY SUSPENSION WORkSTATION kIT

£1495.00

• Stainless steel construction with venturi type suction system• Suitable for petrol or diesel• Fume extraction system for added safety• CE Certified for fuel handling• Supplied with: suction hose with valve3x flexible suction probes, earthingconnections, set of 8 fittings & hose forextraction via fuel supply lines

FUEL RETRIEVER 40LTR

Part No: alb30914kiT

£399.00

• Stainless steel construction with venturi type suction system • Stainless steel construction with venturi type suction system• Suitable for petrol or diesel• Fume extraction system for added safety• CE Certified for fuel handling• Supplied with: suction hose with valve3x flexible suction probes, earthingconnections, set of 8 fittings & hose forextraction via fuel supply lines

FUEL RETRIEVER 90LTR

Part No: alb30634kiT

£795.00

kiT inclUdes :Alb40175 speciAl mercedes JAw seTAlb30956 shock Absorber mAsTer Tool kiT

A workshop kit of bush removal sleeves, and press support block for use on workshop press consists of:

Bearing Press Support – ALB40097• Press bearings easily on a variety of different suspension arms• The three point contact will guarantee a perfect, safe support

Bush Sleeve kit – ALB40045S• Universal set of sleeves for removing & installing bushes, bearings etc.• For use in conjunction with Bearing Press Support block and Workshop Press• Standard universal applications: Car, HGV, LCV • 20 Bush Sleeves – ID range: 34 - 72mm, OD Range: 44 - 82mm • Adaptor plate for use with Press Block

bEARING PRESS bUSH REMOVAL kIT

Part No: alb40045pk

£249.00


Comes with FREE ALB30951 Fuel Tank Sender Removal Tool Comes with FREE ALB30951 Fuel Tank Sender Removal Tool

January/March 2015


POWERED FOR MOT GROWTH IN THE HIGHLANDSWhen Sandy Mackenzie of Goodtread Tyre & Motor Factors in Alness Ross-shire decided to upgrade his existing MOT bay he knew immediately where to turn. He called in Niall Farmer of Andrew Page and Richard Blunt of Continental owned Crypton to design and project manage an upgrade to OPTL Testing.

Sandy commented “We had a professional, efficient and competitive response from Niall and Richard” he then went on to say “installation changes went smoothly without disruption and i would recommend Andrew Page and Crypton”

Andrew Page and Crypton would like to wish Sandy the very best with his new OPTL venture.

YOU CAN CONTACT GOODTREAD ON

01349 882 206 or visit: www.goodtread.com

January/March 2015


TechnicAl TrAining

Our new courses are a truly cost effective and convenient way to get up to speed on the latest automotive systems! Covering a wide range of subjects, these courses have been written and developed by our own fully qualified technical trainers and are all now quality assured by iMi Awards. Each course includes both practical and theory sessions and culminates with a written test paper where technicians will receive a pass certificate upon successful completion. With venues available at many Uk locations and course durations of just one day, we aim to minimise the impact on your business but feel sure that the benefits of the skills gained will far outweigh the short time out of the workshop.

courses available:

APB1 Basic Brake TheoryAPB2 Advanced BrakingAPB3 Fast Fit Braking CourseAPFE3 Fundamental ElectronicsAPCD4 Common Rail DieselAPiS5 ignition SystemsAPEM6 Engine ManagementAPDPF7 Catalytic Converters and DPFAPSC10 Diagnosis Using an OscilloscopeAPGDi11 Gasoline Direct injectionAPCRD12 Common Rail Diagnosis

NEW! ANDREW PAGE ONE-DAY TECHNICAL TRAINING COURSES HAVE ARRIVED!

now available! Find dates and details at: www.autoeducation.co.uk

QUALITY ASSURED

bY IMI AWARDS

ANDREW PAGE NOW AN IMI AWARDS APPROVED ASSESSMENT CENTRE!

All Andrew Page one-day technical courses are now quality assured by IMI Awards!

IMI Awards are the market leader for automotive qualifications and

accreditations, their approved courses are the industry standard for

automotive training and are widely recognised by employers. Start your journey with IMI Awards by visiting imiawards.org.uk or on 01992 519038

IMI Awards provides expert guidance for training providers within the UK retail motor industry. We are the market leader for automotive qualifi cations

and accreditations; off ering the widest range of courses, reliable and fast certifi cate delivery and dedicated customer support.

imiawards.org.uk

imiawards.org.uk

Start your journey with iMi Awards by visiting imiawards.org.uk or tel: 01992 519038

imiawards.org.uk

January/March 2015


Dual operational mode:• Quick access or detail mode possible• Automated management of recovery and recycling• Manual or automated use• Multi-phase recycling• Programmable vacuum phase• Automated re-filling• Integrated, guided pressure test for the system• Automated oil recovery and filling• Automated UV dye injection• Automated removal of non-condensable gasses• Programmable maintenance• Multi-lingual software• Intelligent filling quantity control• Integrated flushing program• Data transfer with Smart Key

BOSCh ACS611 & 511The unit automatically controls every phase of maintenance, including oil and refrigerant recovery, recycling and refilling, without needing direct intervention from a technician. However, the manual mode allows the user to control all aspects individually if so desired.The powerful two-phase vacuum pump of the ACS611 assures quick and effective evacuation of the system and, as with all Bosch units, it comes equipped with a database to provide the necessary oil and refrigerant quantities for the specific vehicle’s air con system. The ACS611 also has an integrated printer to provide detailed reports.As an alternative, for garages with low service levels, we also offer the ACS511, which has a less powerful compressor yet still meets the requirements for a professional A/C service, without compromising on the quality expected from Bosch.

£1695.00LEASE FROM £9.00 PER WEEK

ACS511 MACHINE ONLY

£1895.00LEASE FROM £10.06 PER WEEK

ACS611 MACHINE ONLY

part no: Sp00000001

part no: Sp00000002

end of seAson Air con cleArAnce!

cleArAnce iTems, limiTed sTock

pAckAges AVAilAble. Ask for deTAils


cleArAnce iTems, limiTed sTock

limiTed sTock!ROLSON MINI PLASTIC VICE • Manufactured from PP and rubber• Plastic vacuum base with • 25mm maximum jaw opening• Simply pull locking lever down to fasten on most smooth surfaces• Jaw width 35mm

cleArAnce offer

£1.95UsUAl TrAde price £3.62

Part No: 59148

cleArAnce offer


Part No: chT741

CLARkE 20 PIECE WIRE bRUSH SET • 6” Extension allows rapid changing of brushes when used with power tools.• Soft grip handle with quick release chuck.• Includes steel, brass and nylon brushes with 1/4” hex shanks• Brush sizes: 9mm,11mm,13mm,15mm,• Supplied with a handy storage wallet

CLARkE 20 PIECE DRILL & DRIVER SET A useful 20 piece drill and driver set containing:• 1/4in (6.35mm) Quick change chuck• 8 Hex shank drill bits ( 2x 1.5mm, 2 x 2.5mm, 3mm, 4mm, 5mm & 6mm)• 8 x 50mm Long screwdriver bits (Slotted: 5mm & 6mm, Philips: #1, 2x #2 & #3, Torx T15 and Square #2)• 3 x Hex shank nut drivers (5, 6 and 8mm)• Tough plastic storage case

cleArAnce offer


Part No: chT760

bLUE PRINT FUEL FILTER REMOVAL TOOL An OE developed tool that makes replacement of the fuel filter element on vehicles fitted with the JTD type engine a much quicker and easier job and, most importantly, greatly reduces the risk of damage to the intricate and expensive plastic filter housing or fastening ring.

• Fits multiple makes/models fitted with a JTD style diesel fuel filter

• Chevrolet, Fiat, Peugeot, Saab, Suzuki and Vauxhall applications

cleArAnce offer


Part No: adk85502

cleArAnce offer


Part No: m0003

OMEGA 3 PIECE MINI RATCHET SET

cleArAnce offer


Part No: 313

OMEGA 12” HACkSAW

January/March 2015

46 Turn To page 03 To See our regional map

aldershot 01252 328 088 Andover 01264 363 344 Barnsley 01226 241 127Basingstoke 01256 469 521 Beverley 01482 887 766Birmingham 01213 287 611Blackburn 01254 278 078Bolton 01204 396 105Boston 01205 358 350Bradford 01274 723 156Bramley 01132 362 122Bournemouth 01202 651 100Bristol 01179 350 022Bury 01617 631 515Bury St. Edmunds 01284 753 170Byfleet 01932 353 222Cambridge 01223 425 481Carlisle 01228 524 161Castleford 01977 511 000Chelmsford 01245 491 150Chesterfield 01246 237 207Chichester 01243 780 072Chippenham 01249 460 111Colchester 01206 752 038Coventry 02476 637 181Crawley 01293 428 208Croydon 02086 847 464 CV Spares 01753 680 404Darlington 01325 488 777Derby 01332 343 999Doncaster 01302 886 611Durham 01913 757 577eastleigh 02380 610 061ellesmere Port 01513 563 882Fareham 01329 235 182 Farnborough 01252 518 222Felixstowe 01394 277 917

Gloucester 01452 386 177Great Yarmouth 01493 653 653Grimsby 01472 346 777Guildford 01483 579 383Halifax 01422 355 366Harrogate 01423 568 181Heeley 01142 554 405Hove 01273 775 488Huddersfield 01484 420 077Hull 01482 586 155Ipswich 01473 463 621Isle of Wight 01983 528 866Keighley 01535 610 999Kettering 01536 513 967 King’s Lynn 01553 782 950Kings Norton 01214 862 144 Kingston 02085 461 244Leatherhead 01372 373 595 Leeds 01132 001 000Leicester 01162 854 371Lincoln 01522 539 444Liphook 01428 724 801Loughborough 01509 264 509Louth 01507 605 226Luton 01582 402 722Lytham 01253 722 772 Malton 01653 690 990 Manchester 01618 487 557 Mansfield 01623 648 555 Midsomer Norton 01761 417 570Milton Keynes 01908 372 358 Morley 01132 526 600Newburn 01912 678 999 Newcastle 01912 242 345Northallerton 01609 776 441Northampton 01604 721 770 Norwich 01603 301 346

Nottingham 01159 700 444 Oldbury 01215 527 555 Oldham 01616 336 331 Oxford 01865 749 996 Peterborough 01733 340 177 Portsmouth 023 9266 9745 Preston 01772 258 326 rawdon 01132 506 644 reading 01189 873 333Salisbury 01722 333 321 Scarborough 01723 341 122Scunthorpe 01724 865 458 Selby 01757 290 290 Sheffield 0114 243 0301Shrewsbury 01743 467 536Southampton 023 8078 7142Stafford 01785 223 451 Staines 01784 459 071 Sth Manchester 0161 477 2662 Stockport 01614 806 914Stoke-on-trent 01782 209 938 Sunderland 01915 484 484 Swindon 01793 532 891teesside 01642 677 413 thirsk 01845 526 688 Wakefield 01924 365 727Wallsall 01922 632 233 Warrington 01925 635 352Wigan 01942 231 231Wisbech 01945 461 285 Wolverhampton 01902 738 878 Worcester 01905 611 023Worthing 01903 200 200 Yeovil 01935 474 447York 01904 414 466

brAnch locATions

CONTACT YOUR LOCAL ANdRew pAge BRANCH NOw OR CALL Ap-TeCH ON 0845 602 3436.

01159 700 44401215 527 55501616 336 33101865 749 99601733 340 177023 9266 974501772 258 32601132 506 64401189 873 33301722 333 32101723 341 12201724 865 45801757 290 2900114 243 030101743 467 536023 8078 714201785 223 45101784 459 0710161 477 266201614 806 91401782 209 93801915 484 48401793 532 89101642 677 41301845 526 68801924 365 72701922 632 23301925 635 35201942 231 23101945 461 28501902 738 87801905 611 02301903 200 20001935 474 44701904 414 466

January/March 2015


Andrew Page LtdApson House, Colton Mill, Bullerthorpe Lane, Leeds LS15 9JNTel: +44 (0) 113 3970210Fax: +44 (0) 113 3970298Email: [email protected] Registration No. 1502616

• Lease example: KARHDS601CECO Steam Cleaner – Offer Price £1399 5 Year Lease Plan: Advance Rental £32.18+VAT, followed by 59 rentals of £32.18+VAT. Set up and document fees apply, please ask for details

• All lease rental prices shown assume advance rental equivalent to 1 months rental and all subsequent rentals payable monthly

• All prices shown are subject to VAT and subject to status• All offers are subject to availability and applicable to UK mainland only• All offers available until 31st March 2015• All pictures shown are for illustration purposes only• Lease figures may vary according to status and are for illustration purposes only.• All lease transactions are subject to a documentation fee• Any additional costs incurred concerning LOLER, PUWER and

BS7980 regulations are the customers responsibility• Please make sure your site meets the relevant requirements for the

equipment purchased. If in doubt please contact your area GE Specialist• Prices and specifications subject to change without notice• E and OEPart NO: MWB2015-1

19th March Stoneleigh Park,

WarWickShire

14th May SandoWn Park, Surrey

18th June Metro arena, neWcaStle

22nd october iMPerial War MuSeuM,

duxford

26th noveMber doncaSter race courSe,

yorkShire

DON’T MISS OUT ON OUR 2015 EVENTS!

Free entry & Free parking.Food & refreshments available all day.

PluS: the great britiSh brake off!EntEr our national sEriEs of challEngEs to Win a Mini!

Date post:	29-Apr-2018
Category:	Documents
Upload:	hoangdiep
View:	225 times
Download:	8 times

EXCLUSIVE TO ANDREW PAGE! your loCal andrew 0845 602 3436 page branCh or Call us on see pAge 18 To...

Documents