Material: Zinc Alloy

The CEO 1

Cover has snap in mechanism with bristle hair cable management opening.2 sizes available

Two piece square cover with wire management slot gives a sleek modern look.

Cover has snap in mechanism withremovable flexi-cap management opening.2 sizes available

A

B

C

2-3/8” or 3-1/8”

Drill Hole Size

3-1/8”

Drill Hole Size

Two piece square cover with bristle hair cable management opening slot.

Two piece round cap has a 1-3/8” diameter opening when installed.

The CEO executive grommet

2-3/8” or 3-1/8”

Drill Hole Size

3-1/8”

Drill Hole Size

3-1/8”

Drill Hole Size

SAFE - DURABLE - SHATTER RESISTANT

• Electronically fused steel to carbide tip makes a tough, strong tool you can be proud to own!

• Carbide tipped deep throat hole saws are designed to safely extend the usual range of your portable drill, drill press and lathe. For fast, easy production cutting of abrasive construction materials such as fiberglass, plywood, plasterboard, transite, flakeboard, fiberboard & wood. You can expect this saw to outlast 5 regular saws. Arbor (pictured right) uses a 1/4” pilot drill.

1-3/4” DEEP CUTTING

Material: Zamak

The Secretariat 2

Material: ABS

The Capital 3

Material: ABS

The Empire 4

Material: ABS

The Java 5

F-2 OUTWATER PLASTICS INDUSTRIES, INC. • www.outwater.com

Number Part # FinishA

(Diameter)B

(Depth)C

(Drill Hole Size)Wire Exit Opening

1M-60P* Polished Chrome (*PC)

Satin Nickel (*SN)Stainless Steel (*SS)

2-5/8” (68mm) 55/64” (21.6mm) 2-3/8” (60mm) 2.30” x .835”

M-80P* 3-15/32” (88mm) 55/64” (21.6mm) 3-1/8” (80mm) 3.14” x .832”

2M-60E* Polished Chrome (*PC)

Brushed Nickel (*BN)2-5/8” (68mm) 13/16” (21mm) 2-3/8” (60mm) 1.368” x 1.053”

M-80E* 3-1/2” (90mm) 13/16” (21mm) 3-1/8” (80mm) 1.405” x 1.0115”

Number Part #A

(Diameter/Width)B

(Depth)C

(Drill Hole Size)Wire Exit Opening

3 P-C80* 3-45/64” (94mm) 55/64” (21.6mm) 3-1/8” (80mm) 2.1865” x .597”4 P-M80* 3-43/64 (93mm) 55/64” (21.6mm) 3-1/8” (80mm) 2.715” x .5435”5 P-J80* 3-3/4” (95mm) 55/64” (21.6mm) 3-1/8” (80mm) 1.3”

Part # Hole Dia. Cuts Inserts For:FHC-2 2” #31-2” Round

FHC-275 2-3/4” #35-3” RoundFHC-4125 4-1/8” #37 Wine RingFHC-2125 2-1/8” 2-1/8” Dia.

Part # DescriptionFHA-335 Arbor

METAL

ABS

Executive Series GrommetsExecutive Series Grommets

Grommet Hole CuttersGrommet Hole Cutters

CLICK PART# TO VIEW PRODUCT

A

B

C

For 31 & 35 Series only

Liner

2”

Drill Hole Size

2”

2”

Drill Hole Size

3”

Material: ABS

2”

Drill Hole Size

1-1/8”

Material: High Impact Styrene

2”

Drill Hole Size

1”

Material: ABS

Removable Cap Liner

Set Includes:

Material: ABS

CapTab

Shown: 31DG

Liner

Set Includes:

31 & 35 Series Liners also available separately (BK ONLY) see chart below

31 Series Grommet Sets

26 Series: USB/iPhone Wire Grommet Sets

27 Series: Round Wire Gripping Grommets

36 Series Grommet Sets

Removable tab stores underneath grommet

No More

Lost tabs!

2

5

3

2”

Drill Hole Size

2-3/4”

Material: ABS

35 Series Grommet Sets

Cap w/Tab

Shown: 35BK

Liner

Set Includes:

4

1

2”

Drill Hole Size

2” (T31 Series)

2-3/4” (T35 Series)

Lift up tab and push down into grommet

HiNged

tab!

Material: ABS

2” (T31BK) 2-3/4” (T35BK)

Econo Series Grommet Sets w/Textured Cap

TexturedCap w/Tab

Shown: T35BK

Liner

Set Includes:

6

31 & 35 Series Liners also available separately (BK ONLY) see chart below

Lift up tab and push down into grommet

HiNged

tab!

Lift up tab and push down into grommet

HiNged

tab!

Textured Cap

Cap w/Tab

Shown: 36BK

Liner

Set Includes:

F-3Phone:1-800-631-8375 • Fax:1-800-888-3315

Number Part # Color A B C1 26* Black (*BK), White (*WH) 1-1/8” 1/2” 1”

2 27* Brown (*BR), Black (*BK), White (*WH) 1.23” .295” 1.125”

331* Dove Gray (*DG), Brown (*BR),

Black (*BK), Putty (*PT), White (*WH) 2-1/4” 1” 2”

31BK-LIN Black Liner (for 31* only) 2” 1” 2”

435* Dove Gray (*DG), Brown (*BR),

Black (*BK), Putty (*PT), White (*WH) 3” 1-1/8” 2-3/4”

35BK-LIN Black Liner (for 35* only) 2-3/4” 1-1/8” 2-3/4”

5 36* Black (*BK), White (*WH) 3-1/4” 1” 3”

6T31-BK Black 2-1/4” 1” 2”

T35-BK Black 3” 1” 2-3/4”

Round Wire Management GrommetsRound Wire Management GrommetsCLICK PART# TO VIEW PRODUCT

Spring Loaded Cap Liner

Set Includes:

• Easy access to wires; simply push down on door & slide left or right

• Cap has one piece construction

• 3 sizes available

• Hinged cover• Bristle hair cable management opening

Material: ABS Material: Clear Anodized Aluminum

SPG Series: Spring Loaded Grommet Sets Executive Edge Grommets

2”

Drill Hole Size

1-15/16” (SPG50*)

2-21/64”(SPG60*)

3-1/8” (SPG80*)

A

B

C

A

B

E

C

D

Open

Round Grommet with Lid Square Grommet with Lid

• Self-leveling lid• Horizontal use only

Material: 304 Stainless Steel

• Self-leveling lid• Horizontal use only

Material: 304 Stainless Steel

147R6

147

Cut Out Dimensions

+1 0

+10

Soft-Close

1.2

36(75°)

146

4×R3170

170

(90)

(6-11/16")

(6-1

1/16

")

136

170(6-11/16")

(1-7/16")

146

F-3aPhone:1-800-631-8375 • Fax:1-800-888-3315

Full LineMaster

Distributor

Full LineMaster

DistributorClick To View

Part # Color A B CSPG50-*

Black (*BK), Silver (*SL)

2-9/16” 13/16” 1-15/16”SPG60-* 2-13/16” 25/32” 2-21/64”SPG80-* 3-3/4” 13/16” 3-1/8”

Part # A B C D E

E80-160-S 80MM (3-1/8”)

160MM (6-5/16”)

68MM (2-11/16”)

28MM (1-1/8”)

148MM (5-13/16”)

E80-275-S 80MM (3-1/8”)

275MM (10-13/16”)

68MM (2-11/16”)

28MM (1-1/8”)

264MM (10-3/8”)

Part # FinishAD-DH015 Brushed

Part # FinishAD-KH015-HL Brushed

Wire Management GrommetsWire Management Grommets

Multi-Purpose GrommetsMulti-Purpose Grommets

New

New New

CLICK PART# TO VIEW PRODUCT

• Can fit oversized cords• Can handle multiple cords

• Can close wire cover when not in use

• Can handle multiple cords

1-3/4” x 3-1/4”

4.65” x2.38”

D

EB

C

ALENGTH WIDTH

• Bushings: Deep for wood application, shallow for metal application

• Cap Styles: Circular opening (-2), Oval (-4)

1-7/8” x 3-1/4” with 5/16” radius corners

17.156”x 1.67”

D

EB

C

ALENGTH WIDTH

• 2 insert depths included ( 3/4”-1-13/16” & 1”-1-1/16”)• Accommodates paper up to 17”

Set Includes:

Cap

Liner

CAP #4 (OVAL)

B1⁄16”

A

• Allows for easy maneuvering of wires 2”

Drill Hole Size

2.38” (G31 Series)

3.2” (G32 Series)

Set Includes:

Cap Liner

Set Includes:

Cap Liner

Material: Nylon

Material: ABS

Material: ABS

32 Series: Wire Grommets1

Material: Polystyrene

39 Series Grommet Sets1

Material: ABS

33 Series: Paper Slot Grommets2

Material: ABS

OV32 Series Grommet Sets2

Set Includes:

2-piece Cap

Liner

CAP #2 (CIRCULAR)

A

B

C

Black White Beige Silver Gray Almond Gray Brown

F-4 OUTWATER PLASTICS INDUSTRIES, INC. • www.outwater.com

Number Part # Color A B C D E1 39* Black (*BK), White (*WH), Gray (*GR) 3-1/2” 3-1/4” 9/16” 2” 1-3/4”2 OV32-BK Black only 5” 4.65” .98” 2.77” 2.38”

Part #Hole

DiameterA

Head Dia.B

Thickness Max WireAF-0625 5/8" 0.718" 0.406" 0.437"AF-0750 3/4" 0.859" 0.390" 0.500"AF-0812 13/16" 0.890" 0.390" 0.500"AF-0875 7/8" 0.937" 0.453" 0.562"AF-1000 1" 1.062 0.453" 0.750"AF-1093 1-3/32" 1.156" 0.453" 0.812"AF-1250 1-1/4" 1.360" 0.453" 0.875"

Part # Color A B CG31-* Black (*BK), White (*WH), Beige (*BE),

Silver Gray (*SG), Almond (*AL), Gray (*GY) Brown (*BR), 2.816” .75” 2.375”

G32-* 3.595” .75” 3.195”

Number Part # Cap Style Color A B C D E

1

32BK-2 Oval (-4) Black 3-1/2” 3-1/4” 5/8” 2” 1-3/4”32BK-4 Oval (-4) Black 3-1/2” 3-1/4” 5/8” 2” 1-3/4”

32BKD-2 Oval (-4) Black 3-1/2” 3-1/4” 1-1/4” 2” 1-7/8”32BKD-4 Round (-2) Black 3-1/2” 3-1/4” 1-1/4” 2” 1-7/8”

2 33BK N/A Black 17-7/8” 17.156” 13/16” 2-3/8” 1.67”

Oval Wire Management GrommetsOval Wire Management Grommets

Rectangular Wire ManagementRectangular Wire Management& Paper Slot Grommets& Paper Slot Grommets

REACH & ROHS REACH & ROHS COMPLIANTCOMPLIANT

All-Fit Adjustable Bushing In BlackAll-Fit Adjustable Bushing In Black

Flex Series GrommetsFlex Series Grommets

New

CLICK PART# TO VIEW PRODUCT

• Material: ABS • Clean up electrical cut outs• Available for single or double gang boxes• 1-1/4” Depth with trim lines every 1/4”

Black*(BK)

HardrockMaple *(HM)

Almond*(AL)

Colors Available:White*(WH)

Black HardrockMaple

AlmondColors Available:

WhiteA

B C

2-1/2”

2-1/4”

• Material: ABS • Finishes both sides of the hole• Fits material thickness 3/4” to 2-1/2”• Trimmable - Markings every 1/4”• 2-1/4” ID

• Material: Styrene • 4-7/16” x 6-7/16” Overall• 11/16” Deep• 3-13/16” x 5-13/16” Hole size

Dually Grommet

Electrical Trim Ring

F-4a OUTWATER PLASTICS INDUSTRIES, INC. • www.outwater.com CATALOG IS PRICED CATALOG IS PRICED IN U.S. DOLLARSIN U.S. DOLLARS

Click Here

Click Here

Part # ColorG1032-BK BlackG1032-WH White

Part # Description Color

ETR-S-* SingleHole Size: 3-1/2” x 5-1/4”

White (*WH), Black (*BK),

Almond (*AL), &Hardrock Maple (*HM)ETR-D-* Double

Hole Size: 5-1/4” x 5-1/4”

Part # Color A B CDG25-WH White 3-1/4” 2-1/2” 2-1/2”DG25-BK Black 3-1/4” 2-1/2” 2-1/2”DG25-AL Almond 3-1/4” 2-1/2” 2-1/2”DG25-HM Hardrock Maple 3-1/4” 2-1/2” 2-1/2”

Electrical Trim Ring & Dually GrommetElectrical Trim Ring & Dually Grommet

Outlet Accessory GrommetOutlet Accessory Grommet

CLICK PART# TO VIEW PRODUCT

2”

Drill Hole Size

4”, 6”, 10” & 12”

Material- 304 Stainless Steel

4”, 6”,10’’ or 12”1”, 2” or 6”

3/8”

Material Thickness: .020”

• Brushed finish• Perfect for use in restaurants, doctor’s offices, hospitals, boats, RV’s and public restrooms.• Overlapping trim edge gives professional finished look.

Red & GreenFOR HAZMAT & RECYCLABLES WASTE2 Colors

2”

Drill Hole Size

6”

Material: ABS38 SERIES

• Polished Stainless• Super strong• Multiple styles available for

maximum storage ability

BLOW DRYER HOLDER RING• Holds nozzle up to 3” in diameter• Open bottom

3”

3”

3-3/8”

4”

2”

2-1/4”

4”

1-1/2”

1-3/4”

4”

2-3/4”

3-1/2”

3” 2-1/4”• Holds iron up to

1-1/2” in diameter• Open bottom

CURLING IRON RING • Holds standard size irons

(2-1/4” to 2-1/2”)• Closed bottom

CURLING IRON RING

• Holds iron up to 2” in diameter

• Open bottom

FLAT IRON HOLDER

Material:304 Stainless Steel

F-5Phone:1-800-631-8375 • Fax:1-800-888-3315

Part #Drill Hole Diameter Color

38BK 6” Black38WH 6” White

Part #BSH-BD3

Part #BSH-CU15

Part #BSH-CU2

Part # FinishBSH-FL Brushed Stainless

Part #Drill Hole Diameter Color

38GR 6” Green38RD 6” Red

Other Sizes Available

Part # Diameter HeightTL-041 4” 1”TL-061

6”1”

TL-062 2”TL-066 6”TL-101 10” 1”TL-102 2”TL-121 12” 1”

New

Stainless Steel Trash LinersStainless Steel Trash Liners

Plastic Trash Receptacle GrommetPlastic Trash Receptacle Grommet

Beauty Salon Steel HardwareBeauty Salon Steel Hardware

CLICK PART# TO VIEW PRODUCT

WIRE MANAGEMENT FOR 2-3/8”(60mm)

ROUND TABLE LEGSChannels are supplied with self adhesive tape. This product is used to store and organize wire, computer cable, phone/fax lines, electrical cords and other wiring devices on such items as entertainment centers, computer work stations, desks & home theater systems.

LOCK CLOSE CHANNEL

Lengths: 5 Ft.w/Adhesive Back

Material: Black PVC

OPEN CHANNEL

• Material: Rigid ABS Plastic• Lengths : 8 Ft.• Available In White & Black

(Can Be Painted To Match Wall Colors)

• Accommodates standard household cords

• Material: Polycarbonate• Finish: White• Lengths: 18”• 3M Adhesive• Conceal a low-voltage cable

or wire (Up to 22 gauge wire)• 1/4” height when assembled

SELF ADHESIVE ELECTRICAL WIRE COVER SYSTEM

Material: Black PVC • Lengths: 8 Ft.

1⁄4”

1⁄16”

7⁄16”

3⁄8”3⁄16”

3⁄16”

7⁄16”7⁄16” Tape

Open Channel

Lock Close Channel

BA

C

D

E

F(Tape Width)

BA

C

D

E

F(Tape Width)

1” LONG CLIP CHANNEL

WIRE & CABLE ORGANIZATION CHANNEL Material: Black Virgin Vinyl • Lengths: 8 Ft.

.745” .775”-.785”

1.135”-1.145”

1.015”

.750” Tape.660”

.660”

.795-.805”

.770”-.780”

.500” Tape

.515”

.375”.275”

.250” Tape.440”

1.150”1.230”-1.250” .815”

.900”-1.000”

.750” Tape

.625”.720”

1.900”.250” Tape

1.250”

All Inside Dimensions Are Approximate

F-6 OUTWATER PLASTICS INDUSTRIES, INC. • www.outwater.com

OUTWATER USES ONLY HIGH QUALITY, GENERAL USE ADHESIVE TAPES. EACH CUSTOMER ASSUMES RESPONSIBILITY OF TESTING THE PRODUCT FOR THEIR SPECIFIC APPLICATION. OUTWATER WILL SUPPLY SAMPLES FOR THIS PURPOSE. SPECIAL NEEDS CAN BE ACCOMMODATED ON A PER RUN BASIS.

WE USE ONLY HIGH QUALITY, GENERAL USE ADHESIVE TAPES. EACH CUSTOMER ASSUMES RESPONSIBILITY OF TESTING THE PRODUCT FOR THEIR SPECIFIC APPLICATION. WE WILL SUPPLY SAMPLES FOR THIS PURPOSE. SPECIAL NEEDS CAN BE ACCOMMODATED ON A PER RUN BASIS.

Part # A B C D E FCWM30-BK .365” .650” .143” .770” .410” .625”CWM50-BK .474” .900” .194” 1.01” .550” .750”CWM10-BK .750” 1.335” .242” 1.510” .770” 1.250”

Part #5200-BK

Part #2243-BK

Part# Description

1300-WH 8 Ft. Wire Cover-White w/Adhesive

1300-BK 8 Ft. Wire Cover-Black w/Adhesive

Part#WM-01-WH

Part # A B C D E FCWM15-BK 1.410” .925” .753” 1.061” 2.344” .500”

Part #5230-BK

Part # Description A B C D E FCWM15-BK32 Open Channel 1.410” .925” .753” 1.061” 2.344” .500”CWM10-BK32 Lock Close Channel .750” 1.335” .242” 1.510” .770” 1.250”

PART #CWM-1575-BK

Wire Management ExtrusionsWire Management Extrusions

HideacordHideacord®®

Slide-n-HideSlide-n-Hide

CLICK PART# TO VIEW PRODUCT

• Accessories are compatible, fits both Wire Hider and Snap Latching • UL94VO/5A fire retardant ABS material with a UV stabilizer to prevent color fading

Material: White (*WH) or Clear (*CL) PVC • Lengths: 6 Ft.

Material: White PVC • Lengths: 6 Ft.

Material: White ABS

• Flexible vinyl flap design that keeps wire in place during installation, ideal for ceiling application • Solid cover lids (can be latex painted to match decor)• UL94VO rated • Adhesive back for easy installation • Clear color (for visual cable identification)

• Can be used with or without cover lid (sold separately)

• Economical one piece latching system • UL94VO rated • Latex paintable PVC surface • Adhesive back for easy installation

Ceiling Drop

Outside Corner

Coupler(Wire Hider Only)

Coupler(Latching Only)

End Cap Inside Corner

Right Angle Tee Connector

CWM-FSMEX-WH CWM-FSM-WH

B A

C (Tape Width)

Wire Hider with pressure sensitive adhesive

With pressure sensitive adhesive

BA

C (Tape Width)

A

B

BA

C (Tape Width)

A

B

Wire Hider Cover Lid - White Only

F-7Phone:1-800-631-8375 • Fax:1-800-888-3315

Part # Description A B CCWMH-50-* 1/2” Wire Cover .380” .520” .375”CWMH-1-* 1” Wire Cover .545” 1.085” .750”

CWMH-15-* 1-1/2” Wire Cover .687” 1.5” 1.000”

Part # Description A BCWMC-50-WH 1/2” Wire Cover Lid .535” .645”CWMC-1-WH 1” Wire Cover Lid .605” 1.225”

CWMC-15-WH 1-1/2” Wire Cover Lid .875” 1.687”

Part # Description A B CCWML-50-WH 1/2” Snap Latching Duct .390” .475” .375”CWML-1-WH 1” Snap Latching Duct .545” 1.085” .750”

CWML-15-WH 1-1/2” Snap Latching Duct .687” 1.5” .750”

Part # SizeOC-50-WH 1/2” OC-1-WH 1”

OC-15-WH 1-1/2”

Part # SizeCD-50-WH 1/2” CD-1-WH 1”

CD-15-WH 1-1/2”

Part # SizeCOU-50-WHW 1/2” COU-1-WHW 1”

COU-15-WHW 1-1/2”

Part # SizeCOU-50-LDW 1/2” COU-1-LDW 1”

COU-15-LDW 1-1/2”

Part # Size

CWM-FSMEX-WH1” deep box extender

for CWM-FSM

CWM-FSM-WH1.6” deep single gang

surface mount

Part # SizeEC-50-WH 1/2” EC-1-WH 1”

EC-15-WH 1-1/2”

Part # SizeIC-50-WH 1/2” IC-1-WH 1”

IC-15-WH 1-1/2”

Part # SizeRA-50-WH 1/2” RA-1-WH 1”

RA-15-WH 1-1/2”

Part # SizeT-50-WH 1/2” T-1-WH 1”

T-15-WH 1-1/2”

Accessories

Wire Management / Trunking Cable SystemWire Management / Trunking Cable System

Wire Hider / Cover Lid

Snap Latching Duct

CLICK PART# TO VIEW PRODUCT

These nylon cable clamps are perfect for applications in electronics, automotive, air craft, appliance and many other industries.The Standard Series has a 3/8" wide contact area and is designed for medium to lightweight applications.

STANDARD

* USE #10 PANHEAD FOR ALL

NATURAL NYLON

HEAVY DUTY

These adhesive backed nylon wire & cable clips are used to route wire & cables. The parts are backed with polyurethane foam tape & feature a releasable clip so wires can be removed after assembly if desired.

AWC-0125 AWC-0375

NATURAL NYLON WITH ADHESIVE

Larger Sizes Available up to 1-1/2"

WCA-4

1/4”

5/8”

1/8”

1/4”

5/8”0.51”

0.118” Diameter

1⁄32” Thick Adhesive

0.47”

0.20”

0.20”

0.51”

0.118” Diameter

1⁄32” Thick Adhesive

0.47”

0.20”

0.20”

3⁄4”

3⁄4”

0.46”

0.31”

3⁄8”

3⁄4”

3⁄4”

0.46”

0.31”

3⁄8”

F-8 OUTWATER PLASTICS INDUSTRIES, INC. • www.outwater.com

Part # D W H ECC-0187 3/16" 3/8" .140 (#6) .430CC-0250 1/4" 3/8" .167 (#8) .410CC-0312 5/16" 3/8" .167 (#8) .495CC-0375 3/8" 3/8" .167 (#8) .595CC-0500 1/2" 3/8" .167 (#8) .605

Part # D W H * EHDCC-018 3/16" 1/2" .203 .425HDCC-025 1/4" 1/2" .203 .410HDCC-031 5/16" 1/2" .203 .500HDCC-037 3/8" 1/2" .203 .530HDCC-050 1/2" 1/2" .203 .595HDCC-062 5/8" 1/2" .203 .655HDCC-075 3/4" 1/2" .203 .780

Part # Color LengthBundle Dia.Min – Max

Tensile Strength

NCT-400 Natural 4" 1/16" – 7/8" 18 lbs.NCT-400BK Black 4" 1/16" – 7/8" 18 lbs.

NCT-550 Natural 5-1/2" 1/16" – 1-1/4" 40 lbs.NCT-550BK Black 5-1/2" 1/16" – 1-1/4" 40 lbs.

NCT-800 Natural 8" 1/16" – 2-1/8" 40 lbs.NCT-800BK Black 8" 1/16" – 2-1/8" 40 lbs.NCT-1500 Natural 15" 1/16" – 4" 50 lbs.

NCT-1500BK Black 15" 1/16" – 4" 50 lbs.

Part # Description Inside Dimension

50 FT.COIL

FWF-25511 1/4” White .255" x .125"FWF-25521 1/4” Beige .255" x .125"FWF-14511 3/8” White .375" x .375"FWF-14521 3/8” Beige .375" x .375"FWF-05511 1/2” White .475" x .475"FWF-05521 1/2” Beige .475" x .475"FWF-10511 1” White 1.085" x .545"FWF-10521 1” Beige 1.085" x .545"

100 FT.COIL

FWF-14111 3/8” White .375" x .375"FWF-14121 3/8” Beige .375" x .375"

• Material: PVC - UL94VO Rated - flame retardant• Folds into a rigid PVC channel for wire or cable installations• Easy for storage for up to 50 ft. and 100 ft. of raceway• High quality• Perfect for around windows and doors• Adhesive backing for fast-easy installation

Part # SizeAWC-0125 1/8"AWC-0375 3/8"

AWC-0375BK 3/8"WCA-4 1/4"

REACH & ROHS REACH & ROHS COMPLIANTCOMPLIANT

REACH & ROHS REACH & ROHS COMPLIANTCOMPLIANT

Cable ClampsCable Clamps

Quick Release Cable ClampsQuick Release Cable Clamps

Nylon Cable TiesNylon Cable Ties

Raceway On-A RollRaceway On-A Roll

New

CLICK PART# TO VIEW PRODUCT

By eliminating wall cutouts, show off your backsplash or showcase without the interruption of obtrusive outlets and extension cords!

Angle Power Strip with Tamper-Resistant Receptacles Slim Profile

APT Series

It is recommended that all electrical products be installed by a licensed electrician.

When purchasing 12” or 18” APS seriesyou must specify left or right wire entry.

L = Left Wire Entry

R = Right Wire Entry

All other sizes have a knockout oneither side, so that wiring can

be done in the field.

WIRE ENTRYWIRE ENTRY

1-11/16”

1-1/2”

1-5/

8”

3/4”

7-1/8”

1-1/2” 1-1/2”

7-1/4” 7-1/4” 7-1/4” 7-1/8”36”

36” Fixture: APT-36

7”

7-1/8” 5-1/4” 5-1/4” 5-1/4” 7-1/8”

1-1/2” 1-1/2”

30” Fixture: APT-30

30”

7-1/8”7-1/8” 3-1/2”3-1/4” 3-1/4” 3-1/4” 7-1/8”

1-1/2” 1-1/2”

24” Fixture: APT-24

24”

7”2-1/2”2-1/2”

12” Fixture: APT-12

12”

1-1/2”

= Knock-out (all knock-outs are 1-1/2” from end)

= 15 amp receptacle available

4”3-1/2” 3-1/2”18” Fixture: APT-18

18”1-1/2”

7”

Standard Receptacle Color with Finish Option

Bronze (*BZ)

BlackBlack Black (*BK)

White(*WH)

WhiteSatin Nickel(*SN)

Gray

F-9Phone:1-800-631-8375 • Fax:1-800-888-3315

Part # Length# of Single

ReceptaclesBlack *BK (Receptacle Color: Black), Bronze *BZ (Receptacle Color: Black),

Satin Nickel *SN (Receptacle Color: Gray) & White White *WH (Receptacle Color: White) APT-12-* (L or R) 12” 2APT-18-* (L or R) 18” 3

APT-24-* 24” 4APT-30-* 30” 4APT-36-* 36” 4

Angled Power Strips (120V)Angled Power Strips (120V)NewCLICK PART# TO VIEW PRODUCT

It is recommended that all electrical products be installed by a licensed electrician.

By eliminating wall cutouts, show off your backsplash or showcase without the interruption of obtrusive outlets and extension cords!

Angle Power Strip with Tamper-Resistant Duplex Receptacles

Angle Power Strip with Tamper-Resistant Duplex Receptacles & USB Included

TR Series

TR-USB Series

7-1/2” 7-1/2”9”

1-1/2” 1-1/2”

24” Fixture: TR-24

24”

6” 6”

12” Fixture: TR-12

12”

1-1/2” 1-1/2”

6” 6” 6”18” Fixture: TR-18

18”1-1/2” 1-1/2”

10” 10” 10”

1-1/2” 1-1/2”

30” Fixture: TR-30

30”

12” 12” 12”

1-1/2” 1-1/2”

36”

36” Fixture: TR-36

= Knock-out (all knock-outs are 1-1/2” from end)

= 20 amp receptacle available

12” 12” 12”

1-1/2” 1-1/2”

36”

36” Fixture: TRU-36

6” 6”

12” Fixture: TRU-12

12”

1-1/2” 1-1/2”

6” 6” 6”18” Fixture: TRU-18

18”1-1/2” 1-1/2”

7-1/2” 7-1/2”9”

1-1/2” 1-1/2”

24” Fixture: TRU-24

24”

10” 10” 10”

1-1/2” 1-1/2”

30” Fixture: TRU-30

30”

= Knock-out (all knock-outs are 1-1/2” from end)

= 20 amp receptacle available

= USB/Receptacle combo 15 amp standard receptacle

2-1/4”

2-1/8”

2-1/

2”

7/8”

2-1/4”

2-1/8”

2-1/

2”

7/8”

Knockouts are located on either side, so that wiring can be done in the field.

WIRE ENTRYWIRE ENTRY

Knockouts are located on either side, so that wiring can be done in the field.

WIRE ENTRYWIRE ENTRY

Standard Receptacle Color with Finish Option

Bronze (*BZ)

Black (*BK)

White(*WH)

Satin Nickel(*SN)Gray White

Black Black

Standard Receptacle Color with Finish Option

Bronze (*BZ)

Black (*BK)

White(*WH)

Satin Nickel(*SN)Gray White

Black Black

F-9a OUTWATER PLASTICS INDUSTRIES, INC. • www.outwater.com

Part # Length# of Duplex Receptacles

Black *BK (Receptacle Color: Black), Bronze *BZ (Receptacle Color: Black), Satin Nickel *SN (Receptacle Color: Gray) & White White *WH (Receptacle Color: White)

TR-12-* 12” 2TR-18-* 18” 4TR-24-* 24” 4TR-30-* 30” 4TR-36-* 36” 4

Part # Length Receptacle InformationBlack *BK (Receptacle Color: Black), Bronze *BZ (Receptacle Color: Black),

Satin Nickel *SN (Receptacle Color: Gray) & White White *WH (Receptacle Color: White)

TRU-12-* 12” 1 Combination Receptacle with 1 Plug Outlet & 2 USB Ports

TRU-18-* 18” 2 Receptacles with 1 Duplex Plug Outlet & 1 Combination

Receptacle with 1 Plug Outlet & 2 USB Ports

TRU-24-* 24”TRU-30-* 30”TRU-36-* 36”

Angled Power Strips (120V)Angled Power Strips (120V) NewCLICK PART# TO VIEW PRODUCT

3.5” diameterPull up for easy access

Power Station

Housing: • Material: Aluminum • Color/Finish: Anodized

• Recommended material thickness: 5/16” to 1-3/4”• Reset Switch, Rated A 15A• LED Power Switch• For use in kitchen, plug into a GFCI outlet• Surge protection & Reset button• Locking ring holds unit firmly in place from underneath• Unit locks in its upper most position• Standard splash proof, water resistant seal when in recessed position• 12” Clearance under mounting surface required• 100% guarantee on normal wear and tear

Receptacles: • Material: ABS & Polycarbonate • Color/Finish: Black

Vertical Mount Power Dock • 120V

Pull-Out Handles

Waterproof SealMaster Switch

Power Receptacles

Stop/Release Button

Threaded Mounting CollarRubber Washer & Locking Ring

Holes for Optional Locking ScrewStop Anchor

PDS-MO-300-BK

231⁄32”47⁄16”

75⁄8”

1⁄16”

5⁄8”

1219⁄32”

41⁄16” Dia.

9’ Cord

35⁄32” Dia.(80mm)

Bore Hole

3 ProngPlug In

Housing & Receptacles: • Material: ABS • Color/Finish: Black

• Recommended material thickness: 3/4” to 3”• Each outlet faces a different direction minimizing

issues caused by oversized plugs• Unit locks in its upper most position• 12” clearance under mounting surface required• 3 year warranty

2.95”

3.5”

8 ft. Cord

3 ProngPlug In

3” Bore Hole

10.14”

PDS-NL-300

PDS-LE-220

Waterproof Ring

F-10 OUTWATER PLASTICS INDUSTRIES, INC. • www.outwater.com

Click Here

Click Here

Plug USBPart # Receptacles Rating Ports Rating

PDS-LE-220-BK 2 AC 125V/12A Max 2 2.1A SharedPDS-NL-300-BK 3 AC 125V/12A Max 0 n/a

PlugPart # Receptacles Rating

PDS-MO-300-BK 3 15A/125V/AC

Power HubsPower Hubs we’ve got thewe’ve got the POWERPOWER!!!CLICK PART# TO VIEW PRODUCT

Housing & Receptacles: • Material: Polycarbonate • Color/Finish: Black

• Recommended material thickness: 1/2” to 1-3/4”• Available in White, Green & Orange, please inquire.• 1 year warranty

Housing & Receptacles: • Material: Flame Retardant ABS • Color/Finish: Black

• Recommended material thickness: up to 1-1/2”• Surge protection• 1 year warranty

Power Dome

Flip-Up Pull Ring

Surge Protection Light

Outlet Folds Over

Grommet Lowers Into Hole

Reset Button

2.86”

11.62”

3 Prong Plug In

10’ Power Cord

Bore Hole2-3/8” (60mm)

PDS-CA-420-BK

Housing & Receptacles: • Material: ABS • Color/Finish: Black

• Recommended material thickness: 5/8” to 1”• Two high speed ethernet jacks & two RJ11 phone jacks• Supports Windows 98, 2000, ME, XP & Mac OSX• Can support up to 4 high speed downstream devices up to 480 bps• Circuit breaker & surge protection• Two 2.0A USB smart phone charging ports - 1 primary, 1 secondary• 1 year warranty

411⁄16”

411⁄16”

3 Prong Plug In

Bore Hole23⁄8” ~ 23⁄4”

(60mm~70mm)6’

Power Cord

PDD-HC-240-BK

33⁄4”

11⁄2”

21⁄2”

Fits 1⁄2” - 13⁄4” Work Surface Thickness 3”

Bore Hole 72”Power Cord

3 Prong Plug In

Stores Flat When Not In Use

F-11Phone:1-800-631-8375 • Fax:1-800-888-3315Click Here

Click Here

Click Here

Plug USBPart # Receptacles Rating Ports Rating

PDS-CA-420-BK 4 12A, 125V, 50/60HZ 2 5V/2.1A Max Total

Plug USBPart # Receptacles Rating Ports Rating

PDG-BEH-220-BK 2 15A 2 2A Shared

Plug USBPart # Receptacles Rating Ports Rating

PDD-HC-240-BK 2 10A, 1250V Max 4 2.0A Each

Power HubsPower Hubs

New

New

New

we’ve got thewe’ve got the POWERPOWER!!!CLICK PART# TO VIEW PRODUCT

Power Pyramid

Power Bar

Housing: • Material: Polycarbonate • Color/Finish: Gloss Black

• Recommended material thickness: 1/4” to 1-1/4”• Available in Gloss White, please inquire.• Optional surge protection available, please inquire.• 1 year warranty

Receptacles: • Material: Polycarbonate • Color/Finish: Black

Housing: • Material: Polycarbonate • Color/Finish: Gloss Black

• Recommended material thickness: 1/4” to 1-1/2”• Available in Gloss White, please inquire.• Optional surge protection available, please inquire.• 1 year warranty

Receptacles: • Material: Polycarbonate • Color/Finish: Black

31⁄2”

23⁄4”

21⁄16”

75⁄16”

2”

Fits 1⁄4” - 11⁄2” Work Surface

Thickness

21⁄4”Bore Hole

72” Power Cord

3 Prong Plug In

37⁄8”

37⁄8”2”

4”

25⁄16”

Fits 1⁄4” - 11⁄4” Work Surface

Thickness

3” Bore Hole

72”Power Cord

3 Prong Plug In

Plug Plug Plug

USB

USB

USB

Includes 3Decorative Insert OptionsAdditional options and customization available, please inquire.

Includes 3Decorative Insert OptionsAdditional options and customization available, please inquire.

F-12 OUTWATER PLASTICS INDUSTRIES, INC. • www.outwater.com Click Here

Click Here

Plug USBPart # Receptacles Rating Ports Rating

PDD-BEM-240-BK 2 15A 4 2A Shared per Module

Plug USBPart # Receptacles Rating Ports Rating

PDD-BEB-240-BK 2 15A 4 2A Shared per Module

Power HubsPower Hubs

New

New

we’ve got thewe’ve got the POWERPOWER!!!CLICK PART# TO VIEW PRODUCT

Housing & Receptacles: • Material: ABS • Color/Finish: Black

• Recess Mounts in an 80mm (3-1/8”) Dia. Hole • Recommended material thickness: 3/4” to 3”• 1 year warranty

PDG-FE-120

1”

1⁄16”

31⁄2”

3”31⁄2”

Bore Hole Dia. 31⁄8”

Hole for Wires

One 3 Prong

120V Outlet

Two USB

Charging Ports

5 ft. Power Cable

with3 Prong

Grounded 120V Plug

3 ft. USB Cable

with Detachable

Charging USB Adaptor

Power Center Grommets • 120V

PDG-FE-040

PDG-FE-200

1”

1⁄16”

31⁄2”

3”31⁄2”

Bore Hole Dia. 31⁄8”

Hole for Wires

Four USB Charging

Ports

Two 3 ft. USB Cables

with Detachable

Charging USB Adaptors

1”

1⁄16”

31⁄2”

3”31⁄2”

Bore Hole Dia. 31⁄8”

Hole for Wires

Two 5 ft.

Power Cables with

3 Prong Grounded 120V Plugs

Two 3 Prong

120V Outlets

F-13Phone:1-800-631-8375 • Fax:1-800-888-3315

Plug USBPart # Receptacles Rating Ports Rating

PDG-FE-200-BK 2 AC120V/10A 0 -

Plug USBPart # Receptacles Rating Ports Rating

PDG-FE-120-BK 1 AC120V/10A 2 2A

Plug USBPart # Receptacles Rating Ports Rating

PDG-FE-040-BK 0 - 4 0.5A each

New

Power HubsPower Hubswe’ve got thewe’ve got the POWERPOWER!!!CLICK PART# TO VIEW PRODUCT

Power RotateHousing & Receptacles: • Material: Polycarbonate • Color/Finish: Black

• Recommended material thickness: 3/4” to 1-1/2”• Rotates to hide away• Available in White, Green & Orange, please inquire.• 1 year warranty

51⁄2”Nut Width

47⁄8”

3⁄16”

33⁄8”

Fits 3⁄4” - 41⁄2” Work Surface Thickness

41⁄2”Bore Hole 72”

Power Cord

3 Prong Plug In

Housing & Receptacles: • Material: ABS • Color/Finish: Black

• Recommended material thickness: 3/4” to 2”• Flip top lid/ABS plastic• Surge protection• 3 year warranty

PDG-NL-120-BK

10’ Power Cord

3” Bore Hole

Flip Lid

3 Prong Plug In 14AWG

3.54” Dia.

3.35”

PDG-NL-200-BK

F-13a OUTWATER PLASTICS INDUSTRIES, INC. • www.outwater.com

Click Here

Click Here

Plug USBPart # Receptacles Rating Ports Rating

PDG-BEE-300-BK 3 15A - -PDG-BEE-220-BK 2 15A 2 2A Shared

Plug USBPart # Receptacles Rating Ports Rating

PDG-NL-200-BK 2 125V, 15A - -PDG-NL-120-BK 1 125V, 15A 2 4.2A Shared

New

New

Power HubsPower Hubs we’ve got thewe’ve got the POWERPOWER!!!CLICK PART# TO VIEW PRODUCT

2-1/16”

1-3/4”7-1/4” Cut Out

Overall Size8-1/4”

10 ft. Cord

3 ProngPlug In

1-3/4”

Horizontal Power DocksHousing: • Material: Aluminum • Color/Finish: Matte Black

• Recommended material thickness: 5/8” to 2-3/8”• Can be locked into position at 45º or 60º to allow easy access• Cover can be closed with cords in place, concealed by a flexible strip• 2 Category 5E data modules (Note: Data modules are un-wired)• 100% guarantee on normal wear and tear• Clear Anodized housing available, please inquire

Receptacles: • Material: ABS • Color/Finish: Black

Opening

6”

125⁄8”

31⁄8”

43⁄4”

9’ Cord

3 ProngPlug In

51⁄4” x 113⁄4” Cut Out

ResetButton

31⁄8”

59º

Opening

6”

125⁄8”

31⁄8”

43⁄4”

9’ Cord

3 ProngPlug In

51⁄4” x 113⁄4” Cut Out

ResetButton

31⁄8”

59º

Power Distribution CenterHousing & Receptacles: • Material: ABS • Color/Finish: Black

• Recommended material thickness: 1-1/2”• 1 year warranty

PDC-BY-320-BK

F-13bPhone:1-800-631-8375 • Fax:1-800-888-3315Click Here

Click Here

PlugPart # Receptacles Rating

PDC-MO-300-BK 3 15A/125VAC

Plug USBPart # Receptacles Rating Ports Rating

PDC-BY-320-BK 3 125V/60HZ/12A 2 2.1A Shared

Power HubsPower Hubswe’ve got thewe’ve got the POWERPOWER!!!CLICK PART# TO VIEW PRODUCT

Housing: • Material: Aluminum • Color/Finish: Black, Satin Aluminum

• Recommended material thickness: 3/4” to 3”• Pop-up spring loaded• Optional surge protection available, please inquire.• 3 year warranty

Receptacles: • Material: ABS Plastic • Color/Finish: Black

PDC-NL-120

PDC-NL-200

PDC-NL-220

3 Prong Plug In 14AWG

10’ Power Cord

1.417”

5.118”

4.362”

4.882” 4.016”

Cut Out

3 Prong Plug In 14AWG

10’ Power Cord

1.417”

5.118”

4.362”

4.882” 4.016”

Cut Out

3 Prong Plug In 14AWG

10’ Power Cord

1.417”

6.417”4.362”

6.622”4.016”

Cut Out

F-13c OUTWATER PLASTICS INDUSTRIES, INC. • www.outwater.com Click Here

Click Here

Click Here

HousingColor

Plug USBPart # Receptacles Rating Ports Rating

PDC-NL-220-BK Black 2 125V, 12A 2 4.2A SharedPDC-NL-220-SA Satin Aluminum 2 125V, 12A 2 4.2A Shared

HousingColor

Plug USBPart # Receptacles Rating Ports Rating

PDC-NL-200-BK Black 2 125V, 12A - -PDC-NL-200-SA Satin Aluminum 2 125V, 12A - -

HousingColor

Plug USBPart # Receptacles Rating Ports Rating

PDC-NL-120-BK Black 1 125V, 12A 2 4.2A SharedPDC-NL-120-SA Satin Aluminum 1 125V, 12A 2 4.2A Shared

New

Power HubsPower Hubs we’ve got thewe’ve got the POWERPOWER!!!CLICK PART# TO VIEW PRODUCT

PDC-BT-320-SA-M Housing: • Material: Anodized Aluminum • Color/Finish: Silver/Aluminum

• Recommended material thickness: 3/4” to 2-1/4”• 1 year warranty

Receptacles: • Material: ABS Plastic • Color/Finish: Black

• Manual rotate to hide away

PDC-BT-320-SA

12.636”

4.331”

4.055”

11.575” 4.095”

3 Prong Plug In

79” Power Cord

Cut Out

• Motorized rotation, Dual IC protection, Photoelectric detection

4.331”

14.449”

13.740”

4.331”

4.095”

3 Prong Plug In

79” Power Cord

Cut Out

Buttons to Show/Hide Outlet

ROTATION

F-13dPhone:1-800-631-8375 • Fax:1-800-888-3315

Click Here

Click Here

Plug USBPart # Receptacles Rating Ports Rating

PDC-BT-320-SA 3 110V 2 5V 2.5A Each

Plug USBPart # Receptacles Rating Ports Rating

PDC-BT-320-SA-M 3 110V 2 5V 2.5A Each

New

Power HubsPower Hubswe’ve got thewe’ve got the POWERPOWER!!!CLICK PART# TO VIEW PRODUCT

Housing: • Material: Flame Retardant ABS • Color/Finish: Black

• Recommended material thickness: Up to 3”• 1 year warranty

PDG-BY-020-BK

PDC-BY-120-*Housing: • Material: Aluminum / ABS • Color/Finish: Brushed Chrome & Black • Recommended material thickness: Up to 1-1/2”• 1 year warranty

Receptacles: • Material: Flame Retardant ABS • Color/Finish: Black

1-5/8”

4-3/8”2-1/2”

2”

Cut Out

3-1/4”

1-1/2”

2” Dia.

1-1/2”Bore Hole

2 Prong Plug In

5 ft. Cord

3 Prong Plug In

10 ft. Cord

F-13e OUTWATER PLASTICS INDUSTRIES, INC. • www.outwater.com

Click Here

Click Here

Plug USBPart # Receptacles Rating Ports Rating

PDC-BY-120-BCHR 1 120V, 12A 2 2.1A Shared

Plug USBPart # Receptacles Rating Ports Rating

PDG-BY-020-BK 0 - 2 2@2.1A Each

Power HubsPower Hubs we’ve got thewe’ve got the POWERPOWER!!!

New

New

CLICK PART# TO VIEW PRODUCT

Housing & Receptacles: • Material: Flame Retardant ABS • Color/Finish: Black

• Recommended material thickness: Up to 1-1/2”• 1 year warranty

PDC-BY-220-BK

PDC-BY-320-BKSHousing & Receptacles: • Material: Flame Retardant ABS • Color/Finish: Black

• Recommended material thickness: Up to 1-1/2”• Reset On/Off Switch• 1 year warranty

1-3/4”

8-1/4”

2-1/16”

1-3/4”

Cut Out

7-1/4”

1-3/4”

4-7/8”

1-13/16”

1-11/16”Cut Out

3-3/4”

3 Prong Plug In

10 ft. Cord

3 Prong Plug In

10 ft. Cord

F-13fPhone:1-800-631-8375 • Fax:1-800-888-3315

Click Here

Click Here

Plug USBPart # Receptacles Rating Ports Rating

PDC-BY-320-BKS 3 120V, 12A 2 2.1A Shared

Plug USBPart # Receptacles Rating Ports Rating

PDC-BY-220-BK 2 120V, 12A 2 2.1A Shared

Power HubsPower Hubswe’ve got thewe’ve got the POWERPOWER!!!

New

New

CLICK PART# TO VIEW PRODUCT

Housing: • Material: Polycarbonate • Color/Finish: Black • Pop up with USB ports for charging• Recommended material thickness: 2-1/8”• 1 year warranty

Housing: • Material: Polycarbonate • Color/Finish: Black • Recommended material thickness: 1-1/16”• 1 year warranty

WCD-NL-150-BK (Wireless Charging & USB)

WCD-NL-950-BK & WCD-NL-951-BK (Wireless Charging)

96” Cord

96” Cord

2 Prong Plug In

2 Prong Plug In

3.41”

2.68”

2.97”

2.24”

3.50”

2.95”

1.14”

Works With All Glass Back Cell Phones • Overcharge Protection: Phone will not continue to charge once at 100%

F-13g OUTWATER PLASTICS INDUSTRIES, INC. • www.outwater.com

Plug USBPart # Output Rating Ports Rating

WDC-NL-150-BK 5W 5V/5A 3 1@2.4A Each2@1A Each

Plug USBPart # Output Rating Ports Rating

WCD-NL-950-BK 5W 5V/2A - -WCD-NL-951-BK 10W 9V/1.67A - -

QI ChargersQI Chargers we’ve got thewe’ve got the POWERPOWER!!!

New

New

CLICK PART# TO VIEW PRODUCT

Housing: • Material: Polycarbonate • Color/Finish: Black • Can be installed on top or under desk• Recommended material thickness: 1/8”• 1 year warranty

Housing: • Material: ABS • Color/Finish: Black• Compatible with iPhone XS/MAX/XR/X/8/8+ & Samsung Galaxy Note 9/S9/S9+/Note8/S8.• Recommended material thickness: .866”• 1 year warranty

WCD-NL-900-BK (Wireless Charging)

PDG-HP-010-BK & PDG-SH-000-BK (Wireless Charging & USB)

MountingHardware Included

96” Cord

2 Prong Plug In 6.06” .55”

5.20”1”

.1”

Wall Adapter (Optional)

PDG-SH-000-BK

3.3 Ft. CordUSB Plug

3”

2.36”

.85”

.83”

1.6”

1.37”

Decal Not Included

Works With All Glass Back Cell Phones • Overcharge Protection: Phone will not continue to charge once at 100%

F-13hPhone:1-800-631-8375 • Fax:1-800-888-3315

Plug USBPart # Output Rating Ports Rating

WCD-NL-900-BK 5W 12V/1A - -

Plug USBPart # Output Rating Ports Rating

PDG-HP-010-BK 10W 5V/2A 1 2.0APDG-SH-000-BK 10W 5V/2A 1 2.0A

QI ChargersQI Chargerswe’ve got thewe’ve got the POWERPOWER!!!

New

New

CLICK PART# TO VIEW PRODUCT

C

POWDER COATED STEEL • POWDERED COATED CAST ALUMINUM

* VESA is a registered trademark (video electronics, standards association) It is recommended to always mount into a wood or metal stud using appropriate anchors.

Tilts 0 deg to 8 degLockable

1.25 inchoff the wall

This universal mounting system fits most large flat panel plasma and LCD TVs. Mounts flat to the wall. Made of steel. Locks in place! VESA* compliant.

• Holds 30” - 63” TVs, up to 165 lbs.• Features locking cleats to keep TV safe and secure to wall• Its low profile allows TV to be mounted only 1.25” off the wall• Mounting plate is 32” wide• All mounting hardware included

LCD DOUBLE PIVOT MOUNT

TV-DPMLCD SINGLEPIVOT MOUNT

TV-SFM

POWDER COATED BLACK/HEAVY GAUGE STEEL

LCD FIXED MOUNTTVL-FM

TRIPLE PIVOT MOUNTTV-APM

D

TILT DOWN MOUNTTV-TDME

Under Cabinet, Shaft, or ceiling mount

B

A

F-15Phone:1-800-631-8375 • Fax:1-800-888-3315

PART# TVPL-FM

Part # TV SizeWeight

Capacity Finish Projection Pivot Vesa Plate Size

A TVL-FM 12”-42” 70 lbs Powder Coated Black/ Steel 1/2” off Wall N/A 75 x 75 &

100 x 100 5-1/2” x 5”H

B TV-SFM 12”-27” 25 lbs Powder Coated Silver/Cast Aluminum

2” (Arm can extend 1”)

160ˆ Horizontally45ˆ Vertically

75 x 75 &100 x 100 1-3/4” x 6-3/4”H

C TV-DPM 12”-27” 27 lbs Powder Coated Silver/Cast Aluminum 1-1/2” to 9-1/2” 180ˆ Horizontally

45ˆ Vertically75 x 75 &100 x 100 1-3/4” x 6-3/4”H

D TV-APM 15”-30” 30 lbs Powder Coated Black, Aluminum & Steel 3” -16-1/2”

180ˆ Horizontally7 degrees up

15 degrees down

45 x 45, 75 x 75 & 100 x 100

2-1/2” x 8-1/4”H

E TV-TDM 12”-24” 25 lbs Powder Coated Black & Chrome Cast Aluminum

9” Rod Extension

Drops down 105ˆ and swivels 180ˆ

75 x 75 & 100 x 100 2-1/4” x 5-3/4”H

LCD Wall MountsLCD Wall Mounts

Plasma/LCD Fixed Mount For Flat Panel TV’sPlasma/LCD Fixed Mount For Flat Panel TV’s

CLICK PART# TO VIEW PRODUCT