+ All Categories
Home > Documents > EXPANDED ALUMINIUM MESH - UltraguardAll dimensions and properties are reported as typical...

EXPANDED ALUMINIUM MESH - UltraguardAll dimensions and properties are reported as typical...

Date post: 13-Apr-2020
Category:
Upload: others
View: 1 times
Download: 0 times
Share this document with a friend
1
[email protected] www.ultraguard.com.au Free call: 1800 NOLEAF (1800 665 323) Fax: (02)9609 4170 HEAD OFFICE: 14/19-26 Durian Place Wetherill Park NSW 2164 ©Copyright Protected 2018 to Ultraguard. Copying or alteration of this information without written authorisation from UltraGuard is forbidden. Contents are strictly confidential and privileged. Information is to be used as a guide only. UltraGuard reserves the right to make changes without notice. The data contained in this publication are based on the knowledge available at the time of printing and may be subjected to amendments due to changes in the methods of testing and/or manufacturing. All dimensions and properties are reported as typical values.E&OE. 15 YEARS FACTORY WARRANTY *Conditions apply EXPANDED ALUMINIUM MESH TECHNICAL SPECIFICATIONS Material Exposure Grade Virgin Aluminium Aperture Shape Expanded – Diamond Shape Aperture Size 3.5 mm x 3.5 mm Wire Diameter 0.7 mm Material Thickness 0.5 mm Standard Mesh Widths 250, 500, 750, 1000 mm (other widths upon request) Length 10m, 15m, 30m Powder Coating Interpon D610 (UV Stabilized) Packaging Cardboard centre cores + clear wrap Colour Range Basalt, Cottage Green, Deep Ocean, Dune, Gully, Headland Ironstone, Jasper, Manor Red, Monument, Pale Eucalypt Paperbark, Shale Grey, Surfmist, Vincent Brown, Wallaby Windspray, Woodland Grey, Zincalume (uncoated) Testing & Accreditation CSIRO Flammability Index -Zero (0) AS1530.2 AWQC Water quality AS4020 Guarantee 15 years Applications Zincalume, Colorbond, Aluminium, Tile, Polycarbonate (Not Compatible with Stainless Steel or Galvanized)
Transcript
Page 1: EXPANDED ALUMINIUM MESH - UltraguardAll dimensions and properties are reported as typical values.E&OE. 15 YEARS FACTORY WARRANTY *Conditions apply EXPANDED ALUMINIUM MESH TECHNICAL

[email protected] www.ultraguard.com.au Free call: 1800 NOLEAF (1800 665 323) Fax: (02)9609 4170

HEAD OFFICE: 14/19-26 Durian Place Wetherill Park NSW 2164

©Copyright Protected 2018 to Ultraguard. Copying or alteration of this information without written authorisation from UltraGuard is forbidden. Contents are strictly con�dential and privileged. Information is to be used as a guide only. UltraGuard reserves the right to make changes without notice. The data contained in this publication are based on the knowledge available at the time of

printing and may be subjected to amendments due to changes in the methods of testing and/or manufacturing. All dimensions and properties are reported as typical values.E&OE.

15 YEARSFACTORYWARRANTY

*Conditions apply

EXPANDED ALUMINIUM MESH TECHNICAL SPECIFICATIONS

Material Exposure Grade Virgin Aluminium

Aperture Shape Expanded – Diamond Shape

Aperture Size 3.5 mm x 3.5 mm

Wire Diameter 0.7 mm

Material Thickness 0.5 mm

Standard Mesh Widths 250, 500, 750, 1000 mm (other widths upon request)

Length 10m, 15m, 30m

Powder Coating Interpon D610 (UV Stabilized)

Packaging Cardboard centre cores + clear wrap

Colour Range Basalt, Cottage Green, Deep Ocean, Dune, Gully, Headland

Ironstone, Jasper, Manor Red, Monument, Pale Eucalypt

Paperbark, Shale Grey, Surfmist, Vincent Brown, Wallaby

Windspray, Woodland Grey, Zincalume (uncoated)

Testing & Accreditation CSIRO Flammability Index -Zero (0) AS1530.2

AWQC Water quality AS4020

Guarantee 15 years

Applications Zincalume, Colorbond, Aluminium, Tile, Polycarbonate

(Not Compatible with Stainless Steel or Galvanized)

Recommended