1
-945 2 -946 2 Expanded Metal Mesh Unframed / Framed Type MMaterial SSurface Treatment Color EXPM SUS304 - Silver EXPMB SS400 Cathodic Electrodeposition Paint Black Part Number - A - B EXPM31 - A325 - B255 EXPM EXPMB (Cathodic Electrodeposition, Black) QUnframed Type W B ±1.5 A ±1.5 T W SW t SW LW t Caution Handle with care as cut surfaces and framework inside surfaces are sharp. ECut surface of EXPMB are not surface treated. Part Number - A - B - d EXPMF4H31 - A600 - B400 - 5.5 Caution Handle with care as cut surfaces and framework inside surfaces are sharp. EXPMF EXPMFB (Cathodic Electrodeposition, Black) QFramed Type No Hole NH 4 Holes 4H 6 Holes 6H 6 Holes 6HV 8 Holes 8H 7.5 B A 7.5 7.5 7.5 d B A 7.5 B/2 7.5 B A 7.5 7.5 A/2 d 7.5 7.5 B A 7.5 7.5 A/2 d B/2 7.5 7.5 B A 7.5 7.5 d 1.5 T 30 30 30 30 30 15 7.5 7.5 EFrames spot-welded with EXPM. EA≥B EPositional relationship between frame and expanded metal mesh is random. EThere are 2 welded portions on the frame and some grinding marks remain. Frame Part Close-up B A 1.5 T 30 15 7.5 7.5 Type Expanded Metal Mesh, Frame MMaterial SSurface Treatment Color EXPMF SUS304 - Silver EXPMFB SS400 Cathodic Electrodeposition Paint Black t 30 40 45 8 11.5 12 Groove depth when slot cover is installed. Series t HSCA HSCA6 EXPM HFS6-3030 N N g A 900 W A B 900 B H Bracket Single Joint (P.609) Narrow Type (P.609) Single Joint QInstallation of Unframed Expanded Metal Mesh Putting into Aluminum Frame Grooves When putting expanded metal mesh into aluminum frame grooves, insert the slot cover (HSCA on P.773) into the aluminum frame as shown on the right-hand drawing to make it serve as a holder. Connection of Aluminum Frames When forming a frame with aluminum frames, use Single Joint Kit Narrow Type for Blind Joint on each frame connection (P.609). Brackets and single/double joint for blind joint may become obstacles upon installation of slot covers and Expanded Metal Mesh Size Specifications of Expanded Metal Mesh When putting expanded metal mesh into grooves in aluminum frames with outer dimension WxH as shown on the drawing below, the dimension AxB of the expanded metal mesh can be calculated by the following equation. A = W - (Frame Width - Groove Depth) x 2 - 2 B = H - Frame Width x 1.5+ Groove Depth x 2 - 2 Ex.) When outer dimension is W(900)xH(900) • For Slot Width 8, 30 Square Type: A=900-(30-8)x2-2=854 B=900-30x1.5+8x2-2=869 • For Slot Width 10, 40 Square Type: A=900-(40-11.5)x2-2=841 B=900-40x1.5+11.5x2-2=861 • For Slot Width 10, 45 Square Type: A=900-(45-12)x2-2=832 B=900-45x1.5+11.5x2-2=853. ≈853 Part Number 1mm Increment T SW LW W t Mass kg/m 2 Type No. A B EXPM EXPMB 31 100~1200 100~1000 3.5 12 30.5 1.5 1.2 2.36 42 5.3 22 50.8 2.5 2.3 4.1 QUnit Price of Unframed Type Part Number A Unit Price Type No. B 100~200 201~300 301~400 401~500 501~600 601~700 701~800 801~900 901~1000 EXPM 31 100~200 - - - - - - - - 201~300 - - - - - - - 301~400 - - - - - - 401~500 - - - - - 501~600 - - - - 601~700 - - - 701~800 - - 801~900 - 901~1000 1001~1100 1101~1200 42 100~200 - - - - - - - - 201~300 - - - - - - - 301~400 - - - - - - 401~500 - - - - - 501~600 - - - - 601~700 - - - 701~800 - - 801~900 - 901~1000 1001~1100 1101~1200 EXPMB 31 100~200 - - - - - - - - 201~300 - - - - - - - 301~400 - - - - - - 401~500 - - - - - 501~600 - - - - 601~700 - - - 701~800 - - 801~900 - 901~1000 1001~1100 1101~1200 42 100~200 - - - - - - - - 201~300 - - - - - - - 301~400 - - - - - - 401~500 - - - - - 501~600 - - - - 601~700 - - - 701~800 - - 801~900 - 901~1000 1001~1100 1101~1200 Part Number 1mm Increment d Selection T Type Nominal No. A B EXPMF EXPMFB NH 4H 6H 6HV 8H 31 100~700 100~700 4.5 5.5 6.5 9 3.5 42 5.3 >> (Ex.) (Standard Type Unit Price)+(Hole Machining Charge)= Hole Type Price E Price of Framed Type = Standard Type Unit Price + Hole Machining Charge Part Number - A - B - d EXPMF4H31 - A600 - B400 - 5.5 QHole Machining Charge of Framed Type Hole Fabrication Nominal Hole Machining Charge d (Through Hole) NH 4H 6H 6HV 8H QFramed Type Unit Price Part Number A Unit Price Type Nominal No. B 100~200 201~300 301~400 401~500 501~600 601~700 EXPMF NH 4H 6H 6HV 8H 31 100~200 - - - - - 201~300 - - - - 301~400 - - - 401~500 - - 501~600 - 601~700 42 100~200 - - - - - 201~300 - - - - 301~400 - - - 401~500 - - 501~600 - 601~700 EXPMFB 31 100~200 - - - - - 201~300 - - - - 301~400 - - - 401~500 - - 501~600 - 601~700 42 100~200 - - - - - 201~300 - - - - 301~400 - - - 401~500 - - 501~600 - 601~700
![Metal Fittings - Parts Plaza...[高さ] L D 鉄 Iron 真鍮 Brass アルミ Aluminum 塗装可 Enameled ステン SUS304 本金メッキ Real Gold Plated ステン Stainless Steel](https://static.documents.pub/doc/80x56/5ee223c9ad6a402d666cbfff/metal-fittings-parts-plaza-e-l-d-e-iron-coee-brass-ff-aluminum.jpg)
