Expert at car bodywork repair.
Since more than a decade, the company has exclusively dedicated itself to the automotive sector through the manufacture and distribution of special products used for the manufacture, repair and maintenance of car bodywork.
As an experienced multinational group, Car Repair System has always focused its activity on markets needs and research and development relevance for a continuing progress.
For this reason, through the whole range of products commercialized under the company’s brand that includes products as chemicals, polishers, accessories and complements, protective materials, abrasives, machines, tools and body shop equipment, the company intends to satisfy every car body shop need.
International presence.
Behind those efforts since several years, Car Repair System group is now present all over the world trough subsidiaries and distribution agreements. As consequences, the opening of a recent subsidiary in Italy and the good performance of its known subsidiaries in Spain, France, Portugal and Morocco.
To be present anywhere, the group has succeeded in getting distribution agreements in the rest of Europe and with local importers in Northern Africa, the Middle East, Angola, Mozambique, Cape Verde, Uruguay and Australia.
Quality for system.
Since its inception, Car Repair System’s priority is to ensure the quality of its products and services. As a consequence, the Quality Department keeps putting all its efforts into working in this direction. This is one of the reasons why the company obtained a certification of quality only half a year after its foundation.
Paying a special attention to markets evolution and new technologies, the development of an active Research & Development Department has become essential. The R&D team, whole sole concern is excellence and pioneering in the sector, updates constantly the range of products.
In this day and age, Car Repair System has managed to establish a new embedded system to check Quality, R&D, Environmental and Social Responsibility management.
This allows the company to obtain and maintain the following certification:
• ISO9001:2008 Certificationofqualitysince2001. • ISO14001:2004 Certificationofenvironmentalprotectionsince2005. • UNE166002:2006 Certificationofresearch&developmentsince2011. • SA8000:2008 Certificationofsocialresponsibilitysince2012.
CAR REPAIR SYSTEM GROUP
04/09
10/15
16/19
20/27
28/31
32/41
42/47
FILLING & CARBON REPAIR Polyester Fillers and Carbon Fibre Repair
SEAL REPAIRWindscreen Adhesives and Bodywork Sealers
PROTECT REPAIR Anti-Corrosive Coatings
PLASTIC REPAIR
TECHNO REPAIR Technical Paints
FILLER, CLEAR COAT & MATT FINISHING REPAIRFiller, Clear Coat, Matt Finish, Thinner and Degreaser
PAINT PREPARATION SYSTEMS
COMPOUNDING REPAIRVehicle Polishing, Buffering and Protection
CAR CAREVehicle Cleaning, Care and Protection
MASKING SYSTEM & PROTECTION
PERSONAL PROTECTION EQUIPMENT
ABRASIVES
BODYSHOP EQUIPMENT
ALPHABETICAL INDEX BY DESCRIPTION
48/53
54/57
58/65
66/73
74/87
88/94
95/104
INORDERTOFINDTHEPRODUCTYOUARELOOKINGFOR:Should you know the description of the product, you will find it in the “ INDEX BY DESCRIPTION” (page95/104)
Filling & Carbon Repair / Polyester Fillers and Carbon Fibre Repair
Filling & Carbon Repair – Polyester Fillers
5
1
P150-P320
FILL UNIVERSAL LIGHT BEIGE · Ultra-LightweightFiller
Ultra-light filler of an especially lowweight (950g/l). Easy to spreadwith a spatula,extremely compact and totally non-porous. Easy to sand, then reducing drastically sanding steps and saving time. Its elasticity and shock absorption sets it apart as an outstanding product. Putty with adherent charges and resins over aluminium.
Ref. 5001-1090 Beige 1000 ml 10 Un.
3-5’ 16-25’
FILL LIGHT PLUS · LightweightFiller
Exceptionally low weight ultra-light filler, that allows for exceptional sanding, minimum humidity absorption and has great adhesive power over zinc and aluminium. Since it contains no mineral charges, the dust is significantly reduced during sanding in comparison to other traditional fillers. Putty with adherent charges and resins over aluminium.
Ref. 5001-1082 Blue 1000 ml 12 Un.3-5’ 25’ P80-P220
FILL MULTILIGHT PLUS · LightweightFiller
Exceptionally low weight ultra-light filler. Extremely compact and easy to spread with a spatula. Exceptional sanding, minimum humidity absorption, great adhesive power and excellent finish. Since it contains no mineral charges, dust is significantly reduced during sanding in comparison to other traditional fillers. Putty with adherent charges and resins over aluminium.
Ref. 5001-6106 White 1000 ml 12 Un.3-5’ 25’ P150-P220
FILL SOFT WHITE · Traditional Filler
Traditional filler with excellent adhering properties on tin, steel, galvanised steel and wood.Idealforlargerfillingsandeasytosand.Availablein2-kgcartridgesthatcomewith a manual applicator and hardener.
Ref. 5001-1083 White Tin 2Kg 12 Un.
Ref. 5001-1081 White Cartridge 2Kg 12 Un.
Ref. 5001-1079 - Dispenser - 1 Un.2-4’ 20’ P80-P220
Filling & Carbon Repair – Polyester Fillers
6
FILL MULTISOFT BEIGE · Traditional Filler
Traditional beige polyester filler for any kind of repair. Very creamy and compact. Easy to sand and fast drying. Especially indicated for large ridges.
Ref. 5001-1086 Beige 1,8Kg 10 Un.
Ref. 5001-1092 Beige 3Kg 4 Un.2-4’ 20’ P80-P220
FILL METAL · Special Filler
Polyester filler with a high-density content of aluminium that makes it strongly adhesive on steel, galvanised steel, aluminium, fibreglass, wood, etc. Strong filling power, flexible and easy to sand. Efficient anti-corrosive protection.
Ref. 5001-1125 DarkGrey 1,5Kg 12 Un.2-4’ 20’ P80-P220
FILL GLASS · Special Filler
Fibreglass polyester filler created especially for filling larger imperfections and rusted areas. It sticks directly to the steel surface or body. Easy to sand.
Ref. 5001-1031 Green 1,8Kg 12 Un.2-4’ 25’ P160-P150
FILL EASY SAND · Special Filler
Liquidfillerespeciallyindicatedinthefillingofminorimperfections,pores,andsandingscratches.Extremelyeasytosandevenwithfinegrains(P320,P400).Itactslikeanitroputty,butisatwo-componentproduct.VOCapproved.
Ref. 5001-1087 White 880 ml 6 Un.4-5’ 25’ P280-P360
Filling & Carbon Repair – Polyester Fillers
7
1
NITRO PUTTY 1K
Nitro putty especially indicated in filling pores and light scratches. Fast drying.
Ref. 5000-0001 Grey Tube 180 g 24 Un.
FILL POLISPRAY · LiquidFiller
Polyester filler to be spread with a two-component application gUn. Used for the filling ofshallowsandingmarksandscratches.Fastdrying.Easytosand.Hardenerincluded.
Ref. 5001-0032 LightGrey 1,5 kg 6 Un.20’ 2-3 h 2-3,5 mm
FILL FIBER TECH · Special Filler
High-techfillerwithahighfibreglasscontent,strengthenedwithKevlar,whichmakesit extremely resistant even when applied in thin layers. Ideal when a structure needs reinforcingwithoutaddingaweightylayer.Itiscommercialisedinaconvenient709-mlbag.
Ref. 5001-1089 DarkGrey 709 ml 6 Un.3-5’ 30’ P80-P150
KIT FIBER REPAIR
Kit for fixing fibreglass, metal and other materials. Best used for general repair onindustrial vehicles or auto bodywork, as well as tuning.Composition: Polyester resin: 750 ml • Hardener: 30 g • Fibreglass cloth: 500 x 500 mm • Mixing cup and brush.
Ref. 5001-1128 Kit 6 Un.2-5’ 30’ P60-P150
Filling & Carbon Repair – Polyester Fillers
8
SPATULA CLEANER
Cleaner tank for spatulas. Especially designed to ensure a fast and efficient cleaning. Compatible with all cleaning solvents. Spatulas cleaning process: introduce the spatula through the groove. The friction betweentheinnerfibreandthesolvent(orwater)permitsaperfectcleaning,freeofresidues.
Ref. 2004-1700 2 Un.
STAR BRITE FOR SPATULA CLEANER
Syntheticfeltforcleaningspatulasintosolvent.Packof5unitsforSpatula Cleaner.
Ref. 2004-1701 1 Pack 5 Un.
SET OF 4 METAL SPATULAS
Set of four different-sized metal spatulas.
Ref. 2004-1720 50, 80, 100 and 200 mm 10 Sets 4 Un.
SET OF 5 PLASTIC SPATULAS
Set of five hard plastic spatulas for filler application. Best used for the application of adhesives and stickers.
Ref. 2004-1620 5 x 100 mm 10 Sets 5 Un.
WHITE RUBBER SPATULAS
Flexible rubber spatula used for applying filler on curved surfaces. It adapts to the shape making for an even spread. Resistant to cleaning solvents.
Ref. 2004-1540 100 mm 1 Set 24 Un.
Filling & Carbon Repair – Carbon Fibre Repair
1
9
FILL BLACK CARBON
Black polyester filler for carbon repair. Apply with a spatula. Fast drying and easy to sand. Compatible with all primers or fillers.
Ref. 5001-1454 Black 500 ml 12 Un.2-4’ 30’ P120-P220
FILL TRANSPARENT CARBON
Bicomponent transparent polyester filler for carbon fibre parts repair. Used with transparentMEKhardener.Lowdrying
Ref. 5001-1456 Transparent 500 ml 12 Un.6-8’ 60-90’ P220
Ref. 5009-1458 Black 1 kg 12 Un.
FILLER CARBON FIBER
Manually-applied monocomponent that covers pores. Best used for carbon fibre repairs. Easy to apply. Recommended to be spread with the Hitex 4000 cloth and sand the excessive residues with an ultra-fine abrasive sponge, once dry.
15’
Seal Repair / Windscreen Adhesives and Bodywork Sealers
Seal Repair – Windscreen Adhesives and Bodywork Sealers
11
2
QUICK SEAL · StandardWindscreenGlue
Single-component polyurethane adhesive for direct windscreen gluing. Viscous sealer with dynamic drying. Polymerises whilst in contact with humidity. Apply with a manual or air extrusion gun.
Skinformingtime:40min.Deliveryofvehiclewithoutairbag:2hours.Withairbag:6hours.
Ref. 5002-1062 Black Cartridge 310 ml 12 Un.
Ref. 5002-1045 Black Cartridge 310 ml 12 Un.
QUICK SEAL PLUS · QuickWindscreenGlue
Polyurethane quick adhesive for direct windscreen gluing. Viscous sealant with dynamic drying.
Skinformingtime:25min.Deliveryofvehiclewithoutairbag:1,5hour.Withairbag:3hours.
Ref. 5002-1107 Black Cartridge 290 ml 12 Un.
QUICK SEAL MS 974 · WindscreenMSGlue
Quick single-component adhesive made of MS polymer, a next-generation product for direct windscreen gluing, with high thixotropic properties and dynamic drying. No need to use with Quick Primer Glass.
Ref. 5002-1061 KitDGQuickSeal Standard 6 Un.
Ref. 5002-1060 KitDGQuickSealPlus Quick 6 Un.
Quick Seal Quick Seal Plus
OneStepGlassPrimer OneStepGlassPrimer
Cleaning Cloth Cleaning Cloth
KIT DG QUICK SEAL / SEAL PLUS · WindscreenGlueSet
Kit DG Quick Seal Kit DG Quick Seal Plus
Seal Repair – Windscreen Adhesives and Bodywork Sealers
12
QUICK PRIMER AND ACTIV GLASS · PrimerandActivatorforGlassSurfaces
Universal primer and activator for glass surfaces, ceramic screen printing and painted surfaces.
Ref. 5002-1109 30 ml 10 Un.
Ref. 5002-1108 30 ml 25 Un.
PRIMER APPLICATOR
Cotton swab for applying Quick Primer Glass and Activ Glass.
Ref. 2004-1160 100 Un.
ONE STEP GLASS PRIMER
Black primer that forms a hard and opaque film once dry, improving its adhesion on polyurethane adhesives during gluing of glass, varnish and plastic (PVC, ABS, PMMA andSMC).
Ref. 5002-1110 Black Tube 24 Un.
CLEANING CLOTH
Cleaning and degreasing wipe.
Ref. 2003-2400 Wipe 12 Un.
MANUAL GUN CRS 2050
Manual gun for cartridges or bags of bodywork sealers and windscreen adhesives.
Ref. 1010-7522 1 Un.
PNEUMATIC GUN CRS 4547
Pneumaticgunforcartridgesorbagsupto310mlofbodyworksealersandwindscreenadhesives.
Ref. 1010-1188 1 Un.
Seal Repair – Windscreen Adhesives and Bodywork Sealers
13
2
QUICK FILL · Bodywork Sealer
Quick polyurethane single-component adhesive sealer. Used for joining, sealing and fillingbodyworkpieces.Overpaintableoncedry.Canbesandedeasily.
Ref. 5003-1041 Black Cartridge 310 ml 12 Un.
Ref. 5003-1052 White Cartridge 310 ml 12 Un.
Ref. 5003-1094 Grey Cartridge 310 ml 12 Un.
QUICK MS ECO · Body MS Sealer
Ecopolymericmultifunctional single-component sealer. VOC content: 0%.Doesnotturnyellowovertime.Immediatelyoverpaintable(wetonwet),doesnotgetreducedafter the application.
Ref. 5003-6032 966 White Cartridge 290 ml 12 Un.
Ref. 5003-6038 965 Black Cartridge 290 ml 12 Un.
QUICK FLEX MS · Sprayable Sealer
Single-component bodywork sealer spray to be used on different metallic (steel, galvanisedsteel,stainlesssteel,tin),paintedorprimedsurfacesandplasticmaterials.Elastic. Immediately overpaintable.
Ref. 5003-1043 White Cartridge 290 ml 12 Un.
MULTIFUNCTIONAL PNEUMATIC GUN CRS 2100
Multifunctional pneumatic gun for sprayable sealers, cartridges and bags of windscreen adhesives.
Ref. 1010-7524 1 Un.
Seal Repair – Windscreen Adhesives and Bodywork Sealers
14
QUICK FILL BRUSH · Brush-Designed Sealer
Single-component sealer for leak-free gaskets to be used with a brush. Fast drying. Overpaintablewithanykindofpaintsystemoncetotallydry.
Ref. 5003-1037 Gris Tin 1 kg 12 Un.
Ref. 2004-4030 12 Un.
DOUBLE NYLON BRUSH
Hard nylon fibre brush especially designed for applyingwatertightness sealers andpermitting to obtain a new perfect finish.
Ref. 5011-1077 Colourless Spay 400 ml 12 Un.
QUICK GLUE · Adhesive Spray
Adhesive spray to be used on fabric, felt, tapestry, rubber, plastic, vinyl, polystyrene foam, cardboard, paper as well as on carpets and rugs.
Ref. 2002-1980 50 mm x 300 mm Pack 10 Un. 5 Packs
LOGO TAPE · Sticking Strips
Sticking strips to recover logos and imprints.
Auto-adhesive prefabricated butyl cord for sealing joints, headlights, car step,… Moisture protectionandacousticisolation.Thickness:8mm.Length:4,5m.
BUTYL CORD
Ref. 5003-1001 Black Roll 20 Rolls
Butyl filler for sealing and waterproofing. Can be used on joints, headlights, car steps,…
BUTYL FILLER
Ref. 5003-1002 Black Cartridge 300 ml 12 Un.
Seal Repair – Windscreen Adhesives and Bodywork Sealers
15
2
PREFABRICATED PU CORD
PrefabricatedPUcordfordoor,bootandcarbonnetsealing.Originalfinishguaranteed.Always use PU cords with a primer.
Ref. 2008-56250 Roll 8 mm x 16 m 10 Rolls
Ref. 2008-56260 Roll 10 mm x 16 m 10 Rolls
QUICK METAL BONDING · Epoxy Adhesive
Two-component, modified, epoxy-based adhesive for sealing metals quickly. Recommended for the substitution of non-structural panels like roofs, doors, side panels, etc. Sticks on steel, galvanised steel and tin. Abides by General Motors 6449Grules & regulations for post-sale repair. Provided with a mixing cannula.
Ref. 5003-1045 Black Cartridge 250 ml 6 Un.
PU CORD ACCESSORIES
PRIMER FOR PU CORD
PU CORD APPLICATOR ROLLER
Sprayable primer. Guarantees adhesion of the prefabricated PU cord and prevents corrosion.
Prefabricated PU applicator. Allows the adherence and adaptation to the bodywork, ensuring its perfect positioning.
Ref. 2008-56290 Colourless Spray 400 ml 6 Un.
Ref. 2008-56295 6 Un.
Protect Repair / Anti-Corrosive Protection
Protect Repair – Anti-Corrosive Protection
17
3
STONE CHIP PROTECTION KS-2000
Overpaintable textured stone chip protection. Perfectly protects and isolates thebodywork from the gravel. Its density permits to obtain very similar texture as originally. Anti-corrosive product, overpaintable, can be diluted.
Ref. 5008-1042 Black Tin 1000 ml 12 Un.
Ref. 5008-1053 Grey Tin 1000 ml 12 Un.
Ref. 5008-1054 White Tin 1000 ml 12 Un.
QUICK SHIELD 2K PU · HSStoneChipProtection–Hardener
HSstonechipprotectionmadeoftwo-componentpolyurethane,idealforreinforcingbodywork sealing and protection. Can be used directly on metal, treated surfaces, paint or other reinforced resins.
Ref. 5008-1038 Black Tin 500 g 12 Un.
Ref. 5008-1039 Beige Tin 500 g 12 Un.
QUICK SHIELD · Stone Chip Protection Spray
Overpaintabletexturedstonechipspray.Excellentprotectiveandanti-corrosivepower.
Ref. 5008-1055 Black Spray 500 ml 12 Un.
STONE CHIP PROTECTION WB
Water-based stone chip protection. Protects the paint from the road gravel and prevents the corrosion. Its elastic and hermetic properties guarantee the required protection by vehicles manufacturer after any paint process.
Ref. 5008-1043 Black Tin 1000 ml 12 Un.
Ref. 5008-1044 Grey Tin 1000 ml 12 Un.
Protect Repair – Anti-Corrosive Protection
18
STONE CHIP STANDARD GUN
Gunforapplyinganti-gravelproducts,eitherwater-basedoracrylic.
Ref. 1009-7519 1 Un.
STONE CHIP QS 2K GUN
Gunwithadisposabletip,specificallydesignedforapplyinganti-gravelproducts.Disposable tips for applying two- and single-component anti-gravel products.
Ref. 1009-7520 Gun 1 Un.
Ref. 1009-3090 Tip for 1 l 12 Un.
Ref. 1009-7521 TipforQS2K 12 Un.
Ref. 5008-1066 Yellow Tin 1000 ml 12 Un.
Ref. 5008-1036 Yellow Spray 400 ml 12 Un.
QUICK WAX · Cavity Wax
Cavity-protecting wax with anti-corrosive properties, especially indicated for inside door panels, headlights, bumpers, bonnets, boots, etc.
Ref. 2005-6000 50 cm x 50 cm x 2 mm 10 Un.
SOUNDPROOF SHEET
Flexible sheets that reduce vibrations and increase insulation.
Protect Repair – Anti-Corrosive Protection
33
Plastic Repair
Plastic Repair
21
4
SP WELDING
Welding machine for plastic. Can fix any piece of car or motorbike bodywork (bumpers, aisles, headlights, footrests, grills, dashboards,mouldings, wheel arches, etc.). Easilyand rapidly fixes, strengthens or redesigns any of these elements. Enables to fix without dismantling. Reduces work time and material costs. Three available intensities and three repair angles to permit an easy access to damaged area, even in hard-to-reach ones.
Ref. 1016-10001 1 Un.
Ref. 1016-10003 1 Un.
SP WELDING POCKET
STAPLES SPW
Cordless welding machine equipped with a nickel–metal hydride battery. Its designenablesamoreversatile,preciseuseandtotalfreedomofmovement.Ledlidintegratedbetween the two staple-holders electrodes for a better visibility of the repair area. Securitysystemtoavoidinadvertentlyswitchingon.Batterylife:upto600staples.Three available intensities and three repair angles to permit an easy access to damaged area, even in hard-to-reach ones.
Ten compatible shapes of stainless staples for SP Welding Conventional and SP Welding Pocket.
Ref. 1016-10016 Staples SPW16 100Un./bag 1 Bag
Ref. 1016-10018 Staples SPW18 100Un./bag 1 Bag
Ref. 1016-10026 Staples SPW26 100Un./bag 1 Bag
Ref. 1016-10028 Staples SPW28 100Un./bag 1 Bag
Ref. 1016-10038 Staples SPW38 100Un./bag 1 Bag
Ref. 1016-10047 Staples SPW47 100Un./bag 1 Bag
Ref. 1016-10058 Staples SPW58 100Un./bag 1 Bag
Ref. 1016-10068 Staples SPW68 100Un./bag 1 Bag
Ref. 1016-10078 Staples SPW78 100Un./bag 1 Bag
Ref. 1016-10099 Staples SPW99 25Un./bag 1 Bag
SPW16
SPW47
SPW18
SPW58
SPW26
SPW68
SPW28
SPW78
SPW38
SPW99
Plastic Repair
22
QUICK MIX 4013 · Universal Epoxy Plastic Repair
Two Tubes of epoxy to be used for all types of plastic repair (including oleofinic types suchasTPO,PP,XENOYandPPO).Easytosand.VOCcontent:0%.
Ref. 5006-6029 2 Tubes 2 x 250 g 3 Sets
FILL PLAS · Plastic Filler
Polyester filler with plastic fibre charges, designed especially for filling repairs on plastic surfaces. Flexible and extremely easy to sand.
Ref. 5006-1126 DarkGrey Tin 1,5 kg 12 Un.
FILL FLEX · Plastic Filler
Filler for plastic repair. Easy to sand.
Ref. 5006-1081 DarkGrey Tin 1 kg 6 Un.
Plastic Repair
23
4
ADHESIVE FIBRE
Adhesive fibre roll to reinforce during repairs.
Ref. 5006-1098 50 mm x 20 m 10 Rolls
QUICK MIX GUN
Application gun to be used with Quick Mix cartridges.
Ref. 1010-7525 50 ml Cartridge 1 Un.
QUICK MIX MIXING TIP
Dynamic tip to be used with Quick Mix.
Ref. 5006-1099 Mixing Tip for 50 ml Cartridges 12 Un.
QUICK MIX UNIVERSAL · Universal Plastic Repair
Quick Mix Universal has been designed for quick repair and reinforcing of all plastics, includingthemostdifficulttorepair(PP,EPDM,TPO,XENOY,ABS,PPO,SAN,RRIM,HBA).Itis100%solidandprovidesexcellentjoining.Included:2mixingtipsandaheatresistantfilmtoimprovetherepair.
Ref. 5006-1093 Cartridge 50 ml 12 Un.3’ 10’ 1h
QUICK MIX EXPRESS · Quick Plastic Repair
QUICK MIX CONSUMABLES
Quick Mix Express isindicatedinquickrepairswheresettingtimeislessthan50seconds.Welds, repairs and refills. Included:2mixingtipsandaheatresistantfilmtoimprovetherepair.
Ref. 5006-1096 Cartridge 50 ml 12 Un.
40” 4’ 25’
Plastic Repair
24
QUICK TEX · Textured Paint
Single-component textured paint to paint bumpers and other plastic surfaces for a rough finish.Createsathinprotectiveshield.Overpaintable.
Ref. 5004-1035 - Black Tin 1000 ml 12 Un.
Ref. 5004-1050 - Grey Tin 1000 ml 12 Un.
Ref. 5004-1036 Thick Black Tin 1000 ml 6 Un.
Ref. 5004-1037 Thick Grey Tin 1000 ml 6 Un.
QUICK TEX · Textured Paint Spray
Single-component textured paint spray to paint bumpers and other plastic surfaces for a roughfinish.Createsathinprotectiveshield.Overpaintable.
Ref. 5004-1034 Black Spray 400 ml 12 Un.
Ref. 5004-1049 Grey Spray 400 ml 12 Un.
QUICK RCOLOR · Renewal Paint
Plastic-based paint for vinyl and plastic repair. Completely covers stains on bumpers.
Ref. 5004-1047 Black Spray 400 ml 12 Un.
Ref. 5004-1048 DarkGrey Spray 400 ml 12 Un.
TEXTURED ADHESIVE PLASTIC
Auto-adhesive tape with a textured finish touch that imitates original finish on door frames of certain car models. Easy to lay.
Ref. 2001-1585 Roll 150 mm x 5 m 1 Un.
Plastic Repair
25
4
QUICK PLAST-GEL · Dye
Water-based dye, especially designed for plastic surfaces and bumper moulding. Apply with sponge or Hitex 4000 cloth.
Ref. 5004-1083 Black Plastic Bottle 1000 ml 6 Un.
Ref. 5004-1085 DarkGrey Plastic Bottle 1000 ml 6 Un.
Ref. 5004-1084 Black Tube 150 ml 15 Un.
Ref. 5004-1086 DarkGrey Tube 150 ml 15 Un.
QUICK PLASTIC PRIMER · Transparent Plastic Primer
Transparent primer created especially to guarantee adhesion of any type of paint used on plastic surfaces.
Ref. 5004-1106 Colourless Spray 400 ml 12 Un.
Ref. 5004-1107 Colourless Tin 1000 ml 12 Un.
QUICK ADHESION PROMOTER
Mixture of different resin properties created to generate a chemical union on difficult plastic surfaces, enhancing adhesion during repair.
Ref. 5006-1091 Colourless Spray 400 ml 12 Un.
QUICK RSTORE · Plastic Renovator
Renovatinggelforrenewalofoutdoorplastics(bumpers,spoilers,mirrorbrackets,etc.)and rubbers. Non-stick, long-lasting action and silicone free.
Ref. 5005-1137 Transparent Blue Bottle 1000 ml 12 Un.
Plastic Repair
26
QUICK CYAN · Cyanoacrylate
QUICK CYAN ACTIVATOR · Cyanoacrylate Activator
Fast-drying liquid cyanoacrylate that generates chemical unions on most surfaces. When used together with Quick Cyan Activator, drying is guaranteed even at lower temperatures.
Thisproductguaranteesdryingatlowtemperatures,evenbelow0ºC.
Ref. 5007-1088 Colourless Bottle 20 g 20 Un.
Ref. 5007-1089 Colourless Spray 200 ml 12 Un.
Plastic Repair
4SPW16
SPW47
SPW18
SPW58
SPW26
CONVENTIONAL
SPW68
SPW28
SPW78
SPW38
SPW99
Techno Repair / Technical Paints
Techno Repair – Technical Paints
29
5
QUICK PIERRE FUSIL · Pierre Fusil Paint
Two layers solvent based paint. Renault code: Pierre Fusil. Indicated to be used on car mouldings, body side mouldings, bumpers,… To be covered with an acrylic clear coat. Recommended clear coat: Quick Clear Lacquer-M 500 ml.
Ref. 5011-1054 Spray 400 ml 12 Un.
QUICK RALLY BLACK · Black Paint
Nitro-based, plastified, single-component acrylic paint for surface repainting. Available in three finishes: matt, satin or gloss.
Ref. 5004-6023 Matt Black Tin 1000 ml 12 Un.
Ref. 5004-6024 Satin Black Tin 1000 ml 12 Un.
Ref. 5004-6039 GlossBlack Tin 1000 ml 12 Un.
QUICK HEATPROOF · Heat-ResistingPaint
Anti-heat paint for treating areas exposed to high temperatures. Silver:upto360ºC.Black:upto600ºC.
Ref. 5011-1116 Silver Spray 400 ml 12 Un.
Ref. 5011-1117 Black Spray 400 ml 12 Un.
QUICK RALLY BLACK AND WHITE · Spray Paint
Universal nitrocellulose paint. Available in four finishes: matt, satin and gloss black and glossywhite(RAL9010).
Ref. 5011-6023 Matt Black Spray 500 ml 12 Un.
Ref. 5011-6024 Satin Black Spray 500 ml 12 Un.
Ref. 5011-6039 GlossBlack Spray 500 ml 12 Un.
Ref. 5011-6040 GlossWhite Spray 500 ml 12 Un.
Techno Repair – Technical Paints
30
ALUMINIUM WHEEL KIT
Kitforrepairingandpaintingalloyrims.Kitcomposedbyanaluminiumputtyandsixacrylicpaint sprays in different grey tonalities (from the lighter and finer grey to the darker and thickergrey,includingananthracitegrey).Thekitcontainsacolourcharttochoicetherightcolour and to apply directly, without mixtures. Includes also some masking cards for rims, a very resistant clear coat and its hardener to finish the repair.
Ref. 5014-1000 Kit 1 Un.
Ref. 5011-1000 Aluminium Paint Ultra Fine B01 Spray 400 ml 12 Un.
Ref. 5011-1001 Aluminium Paint Fine B02 Spray 400 ml 12 Un.
Ref. 5011-1002 Aluminium Paint Medium B03 Spray 400 ml 12 Un.
Ref. 5011-1003 Aluminium Paint Sparkling B04 Spray 400 ml 12 Un.
Ref. 5011-1004 Aluminium Paint Super Sparkling B05 Spray 400 ml 12 Un.
Ref. 5011-1005 Aluminium Paint Dark B06 Spray 400 ml 12 Un.
Ref. 5001-1000 FillMetal+Hardener Tin 750 g 18 Un.
Ref. 5009-1005 StarLackThermoCeramicClearCoat Tin 1 l 12 Un.
Ref. 5009-1006 StarLackThermoCeramicHardener Tin 0,5 l 24 Un.
QUICK WHEEL SILVER · Tin for Alloys
Nitro-based, plastified, single-component acrylic paint for final retouching of surfaces.
Ref. 5004-1136 GreyAluminium Tin 1000 ml 12 Un.
QUICK WHEEL SILVER · Alloy Spray
Acrylic, resin-based spray designed for painting alloys, metals and hard plastics. Fast drying.
Ref. 5011-1136 GreyAluminium Spray 500 ml 12 Un.
CHROME EFFECT · Chrome paint
Special chrome effect paint to apply in a three layers system. The paint has to be applied onahighqualitymonolayerglossyblackbase.Oncedry,itisrecommendedtoapplyaclear coat to ensure the durability.
Ref. 5004-6040 Chrome Tin 750 ml 6 Un.
Techno Repair – Technical Paints
5
Filler, Clear Coat & Matt Finishing Repair / Filler, Clear Coat, Matt Finish, Thinner and Degreaser
Filler, Clear Coat & Matt Finishing Repair – Fillers
33
6
FILLER AND SURFACER HS 540 + HARDENER
Extremely thick filler provided with its extra fast hardener. Fast drying and easy to sand. Available in three colours: pure white, grey and black. With the option to mix them to obtain different shades of grey. Can be used with an accelerator to achieve even faster drying.Mixingproportions4:1.
Ref. 5009-1160 Grey Tin 1 l + 250 ml 6 Un.
Ref. 5009-1161 Black Tin 1 l + 250 ml 6 Un.
Ref. 5009-1163 White Tin 1 l + 250 ml 6 Un. 4:1 150-300 µ 4-8 h
EASY FILLER 4000
Next-generation filler, created especially for an easy application and sanding. Available intwoshadesofgrey,lightanddark.Highdensityfillerspeciallydevelopedtoachievea better finish in car bodywork repair. Better application and sanding. Providing a satin effect once dry. Both light and dark grey colourscanbemixedtoobtainvariousgreycolourschemes.Mixingproportions5:1.
Ref. 5009-1220 LightGrey Tin 4 l 4 Un.
Ref. 5009-1221 DarkGrey Tin 4 l 4 Un.
EASY FILLER HARDENER
Ref. 5009-1222 Standard 800 ml 6 Un.
Ref. 5009-1223 Extra fast 800 ml 6 Un.5:1 150-240 µ 3-5 h
FILLER AND SURFACER HS 540
Extremely thick filler. Fast drying and easy to sand. Available in three colours: pure white, grey and black. With the option to mix them to obtain different shades of grey. Canbeusedwithanacceleratortoachieveevenfasterdrying.Mixingproportions4:1.
Ref. 5009-1146 White Tin 3,6 l 4 Un.
Ref. 5009-1147 Grey Tin 3,6 l 4 Un.
Ref. 5009-1150 Black Tin 3,6 l 4 Un.
HS FILLER HARDENER
Ref. 5009-1154 541 Extra fast 900 ml Tin 12 Un.
Ref. 5009-1159 541 Standard 900 ml Tin 12 Un.4:1 150-300 µ 4-8 h
Filler, Clear Coat & Matt Finishing Repair – Fillers
34
QUICK 1K HIGH BUILDER · Quick Filler Spray
Quick spray with enhanced filling properties. Fast drying and easy to sand. Applied directly to metals, fillers or properly sanded and worn-out painted areas. Compatible with all repainting systems.
Ref. 5011-1068 LightGrey Spray 450 ml 12 Un.
Ref. 5011-1069 DarkGrey Spray 450 ml 12 Un.
Ref. 5011-1070 White Spray 450 ml 12 Un.
QUICK BODYPRIMER HS · HighSolidFillerSpray
Flexible high solid filler to be used on metal, wood and plastic. Enhanced filling properties. Can also be used as adhesive base.
Ref. 5011-1056 Black Spray 500 ml 12 Un.
Ref. 5011-1057 Grey Spray 500 ml 12 Un.
Ref. 5011-1058 White Spray 500 ml 12 Un.
QUICK WASH PRIMER · Quick Primer Spray
Primer/Adherencepromoterapplieddirectlytobaremetalssuchassteel,zincandtin.Fast drying and overpaintable even wet on wet after evaporation. Excellent anti-corrosive properties. To be used before any filler or primer.
Ref. 5011-1067 Grey Spray 400 ml 12 Un.
QUICK ZINC · Zinc Primer
Semi-glossy,epoxy-basedzincspraytobeusedonmetals.Highzinccontent(90,5%oncedry).Excellentanti-corrosiveproperties.
Ref. 5011-1073 Spray 400 ml 12 Un.
QUICK ZINC-ALU · Zinc–AluminiumPrimer
Silver-coloured, satin paint that provides great anti-corrosive protection for metals, thankstoitshighpurezincVOCcontentanditsaluminiumpigments.
Ref. 5011-1075 Spray 400 ml 12 Un.
Filler, Clear Coat & Matt Finishing Repair – Clear Coats
35
6
STAR LACK CLEAR COAT UHS 4000
STAR LACK CLEAR COAT HS LVC 4020
STAR LACK CLEAR COAT HS 4050 PLUS
STAR LACK HARDENER UHS
STAR LACK HARDENER HS LVC
STAR LACK HARDENER HS *
Next-generationUHSclearcoattobeusedforrepaintingcarbodiespartiallyorcompletely.Easy to apply. Excellent finish. Can be used in any repaint procedure thanks to its versatility andtherangeofitshardeners.Mixingproportion2:1.
Next-generationHS clear coatwith a high solid content that creates a strongglosseffect. Perfect for any type of repair: does not wear away. There is a large range of compatible hardeners for this product. Mixingproportions2:1.
HSclearcoatwithanti-scratchproperties.Fastdrying.Producesahighlyeffectivefinish.Easy to apply. Does not require thinner. There is a large range of compatible hardeners forthisproduct.Mixingproportion2:1.
*This last generation clear coat formula is compatiblewith the clear coat 4000 UHShardeners for a best finishing. Mixture more solid, best thixotropy and wear resistance.
Ref. 5009-1110 Tin 5 l 4 Un.
Ref. 5009-1116 Tin 1 l 12 Un.
Ref. 5009-1195 Tin 5 l 4 Un.
Ref. 5009-1202 Tin 1 l 6 Un.
Ref. 5009-1022 Tin 5 l 4 Un.
Ref. 5009-1021 Tin 1 l 18 Un.
Ref. 5009-1111 1000 Fast 2,5 l 4 Un.
Ref. 5009-1112 2000 Normal 2,5 l 4 Un.
Ref. 5009-1113 3000 Slow 2,5 l 4 Un.
Ref. 5009-1117 2000 Normal 0,5 l 6 Un.
Ref. 5009-1197 1020 Fast 2,5 l 4 Un.
Ref. 5009-1198 1030 Normal 2,5 l 4 Un.
Ref. 5009-1203 1030 Normal 0,5 l 6 Un.
Ref. 5009-1199 1040 Slow 2,5 l 4 Un.
Ref. 5009-1200 1050 Extra slow 2,5 l 4 Un.
Ref. 5009-1138 2010 Slow 2,5 l 4 Un.
Ref. 5009-11017 2020 Normal 0,5 l 12 Un.
Ref. 5009-1026 2020 Normal 2,5 l 4 Un.
Ref. 5009-1141 2030 Fast 2,5 l 4 Un.
2:1 1+1 3-4 h
2:1 1+1 4-5 h
2:1 ½+1 5-6 h
Filler, Clear Coat & Matt Finishing Repair – Clear Coats
36
STAR LACK 1K
Single-component acrylic clear coat for interiors. Long-lasting, glossy finish. Driesnaturally, does not turn yellow. Can be thinned. Apply two layers with a 10-minuteintervalbetweeneach.Dust-freein10minutesanddryin2hours.Without Pot Life.
Ref. 5009-1250 Tin 1 l 12 Un.
QUICK SPOTBLENDER · Thinner for Blenders
Mixture of high-quality thinners to be used for paint blending during repairs. Fine mist spray. To be used with an application gun or directly with the spray.
Ref. 5011-1155 Spray 400 ml 12 Un.
Ref. 5011-1156 Tin 1000 ml 12 Un.
STARMATE · Matt Clear Coat
STARMATE HARDENER
Two-component acrylic clear coat for two-layer matt finish systems. Mixingproportion5:1.Fastdryingandevenfinish.
Ref. 5009-1300 Clear Coat 1 l 12 Un.
Ref. 5009-1301 Standard 0,5 l 5 Un.
Ref. 5009-1302 Fast 0,5 l 5 Un.
STAR LACK EXPRESS
Lastgenerationclearcoatwithairdryingtechnology,withnoneedtouseheatdryingsystems altough the products allows it perfectly. Especially developed for all kind of painting works, including flat parts such as roofs, hoods, complete sides… Allows to paint one part after another thanks to its spraying acceptance time of a standard clear coat.
At20ºC: Operable in: 40 minutes / Imperfection cutting - polishing: 90 minutes / Total dry -Overpaintable:4hours.
Ref. 5009-1114 Clear Coat Tin 2,5 l 4 Un.
Ref. 5009-1115 Hardener Tin 2,5 l 4 Un.1:1 1+1 90’
5:1 1+1 4h
Filler, Clear Coat & Matt Finishing Repair – Special Finishes
37
6
HEADLIGHTS KIT
Kit includingahigh resistant clear coatwith itshardener andanadditiveespeciallysuitable for UV light-protection. This additive protects the polycarbonate panels after repair.
Ref. 5006-1101 Kit 1 Un.
HEADLIGHTS REPAIR KIT
Set for repairing and recovering polycarbonate screens, used for car, industrial vehicle and motorcycle headlight production. Comes with different sanding grains for rectifying minor superficial damage and restoring worn-out surfaces. Includes a two-component polyester with anti-shock effect to protect the screen after repair.
Ref. 3001-5003 Kit 1 Un.
QUICK CLEAR LACQUER · Acrylic Clear Coat Spray
Monocomponentacrylicclearcoatspraywithanewformula.Lastgenerationproduct.Generalusefortwolayersbased-waterorsolventpaintsprocess.Highqualityresinthatguaranteesahighlevelrepair.Gloss,satinormattfinish.
Ref. 5011-6021 Colourless Gloss 500 ml 12 Un.
Ref. 5011-6020 Colourless Satin 500 ml 12 Un.
Ref. 5011-6019 Colourless Matt 500 ml 12 Un.
STARLIGHT · Polyester for Polycarbonates
Two-component polyester with anti-scratch effect to protect polycarbonate surfaces. Creates a shieldover thewindscreen.Protects fromgravel and insects.Guarantees clearvisibility. Extra-fast hardener. Mixingproportion2:1.
Ref. 5009-1001 Polyester Tin 1 l 1 Un.
Ref. 5009-1002 Hardener Tin 0,5 l 1 Un.2:1 ½+1 90’
Filler, Clear Coat & Matt Finishing Repair – Thinners and Degreasers
38
IONISEUR WB
Thinner for water-based paint. It is a solution ionised with magnetic charges so that when in contact with paint, positive charges are transferred to the mixture, obtaining a higher paint transfer to the surface being painted. Considerably reduces drying time and prevents stains and streaks from appearing. Compatible with all water-based systems that admit thinning.
Ref. 5009-1190 Bottle 1 l 14 Un.
Ref. 5009-1189 Cylinder 5 l 4 Un.
ACELERATOR FOR ACRYLICS
Accelerating additive for paints, fillers and primers. Reduces drying time.
Ref. 5009-1155 Colourless Tin 1000 ml 12 Un.
DEGREASER CARS
Degreaser with intense cleansing power. Removes wax and silicone surplus.
Ref. 5009-1144 9410 Slow Tin 1 l 12 Un.
Ref. 5009-1145 9410 Slow Tin 5 l 4 Un.
Ref. 5009-1033 0467 Fast Tin 1 l 12 Un.
Ref. 5009-1025 0467 Fast Tin 5 l 4 Un.
THINNER UNIVERSAL CARS
Acrylic thinner for paints, clear coat and acrylic fillers.
Ref. 5009-1018 Slow Tin 1 l 12 Un.
Ref. 5009-1016 Slow Tin 5 l 4 Un.
Ref. 5009-1019 Standard Tin 1 l 12 Un.
Ref. 5009-1020 Standard Tin 5 l 4 Un.
QUICK HYDROCLEANER · Water-Based Degreaser
Water-based cleansing degreasers for cleaning the surface before painting with hydrosoluble products. It is recommended to use together with Hitex 4000.
Ref. 5009-1194 Cylinder 5 l 4 Un.
Filler, Clear Coat & Matt Finishing Repair – Application Equipment and Accessories
39
6
TechnologyAir consumptionWorking pressureAir entryDeposit capacityTransfer rateOpeningwidth
TechnologyAir consumptionWorking pressureAir entryDeposit capacityTransfer rateOpeningwidth
TechnologyAir consumptionWorking pressureAir entryDeposit capacityTransfer rateOpeningwidthOpeningwidth
TechnologyAir consumptionWorking pressureAir entryDeposit capacityTransfer rateOpeningwidthOpeningwidth
L.V.M.P.(R.P.)280l/m2,5 bar¼600 ml65%1,3 mm
L.V.L.P255l/m1,8 bar¼600 ml70%1,3 mm
L.V.M.P.(R.P.)270l/m3,0 bar¼600 ml60%1,8mm/Filler2,5mm/Polyestermastic
H.V.L.P.(CRS-ST3000)andL.V.M.P(LM3000)110l/m2,0 bar¼250 ml70%0,8mm(CRS-ST3000)1,0mm(LM3000)
CRS-PRO CLEAR 2011 GUN
LVLP CRS-007X BASE PAINT GUN
CRS-W400 FILLER AND PUTTY GUN
MINI TOUCH UP GUN
Ref. 1001-7105 Gun 1,3 mm 1 Un.
Ref. 1002-7119 Cup PVC 0,6 l 1 Un.
Ref. 1002-7101 Projection kit 1,3 mm 1 Un.
Ref. 1001-7101 Gun 1,3 mm 1 Un.
Ref. 1002-7107 Cup PVC 0,6 l 1 Un.
Ref. 1002-7104 Projection kit 1,3 mm 1 Un.
Ref. 1002-7105 Projection kit 1,4 mm 1 Un.
Ref. 1001-7100 Gun 1,8 mm 1 Un.
Ref. 1002-7108 Cup PVC 0,6 l 1 Un.
Ref. 1002-7106 Projection kit 1,8 mm 1 Un.
Ref. 1002-7111 Projection kit 2,0 mm 1 Un.
Ref. 1002-7112 Projection kit 2,5 mm 1 Un.
Ref. 1001-7103 CRS-ST3000 0,8 mm 1 Un.
Ref. 1001-7104 LM3000 1,0 mm 1 Un.
Ref. 1002-7109 Non-drip PVC cup 250 ml 1 Un.
Ref. 1002-7110 Projection kit 0,8 mm 1 Un.
Ref. 1002-7103 Projection kit 1,0 mm 1 Un.
Filler, Clear Coat & Matt Finishing Repair – Application Equipment and Accessories
40
PRESSURISED PULVERISER
Pressurised pulveriser with a safety valve and gaskets that resist different chemical products, including acids, solvents and alkalines. Fan-shaped spraying head that can be tilted vertically as well as horizontally. Maximum application pressure allowed by the valve:2bar(58psi).
Ref. 2004-0002 Spray bottle 1 l 5 Un.
AIR REGULATOR CRS
Analog air pressure regulator for painting guns. Includes an indicating manometer and a control pad.
Ref. 1002-7102 1 Un.
MAGNETIC GUN BRACKET
Magnetic bracket for two gravity guns. Provides a reliable fix on metals.
Ref. 2004-3000 1 Un.
DUST REMOVAL NEEDLES
Stand-alone, flexible steel needles with a microscopic tip for removing dust particles, hairs, insects or other objects that might stick to fresh paint.
Ref. 2004-1240 Set 6 needles 1 Set
Ref. 2004-1770 Kit10needles+pen 1Kit
Equipment cleaning
SPRAY GUN CLEANER · GunCleaner
Water-based soap for cleaning guns, application equipment and water-based clear coats. Spray directly on paint residue, even dry ones, the soap will dissolve them easily without damaging the equipment.
Ref. 5012-1000 Cylinder 25 l 1 Un.
Ref. 5012-1001 Cylinder 5 l 4 Un.
SPRAY GUN CLEANER KIT
Guncleanersetmadeofdifferent-sizedbrushes.
Ref. 2004-3020 Kit 5Kits
Filler, Clear Coat & Matt Finishing Repair – Pre-paint Cleaning
41
6
POLYTEX CRS · Degreaser Cloth
Cleaning and degreasing cloth for painting process. Its structure is composed by inserted polypropylene making the cloth more adaptable and elastic. Excellent absorption.Usefulrollof500precut320x380mmcloths.
Ref. 2003-1040 Blue 32 cm x 38 cm 1 Roll 500 Un.
Ref. 2003-1050 Blue 38 cm x 30 cm 1 Dispenser box 150 Un.
HITEX 4000 · Non-woven Degreasing Cloth
Degreasing cloth made of a non-woven fabric. Especially resistant to thinners, degreasers and anti-silicone products. Strong absorption power and resistance.
Ref. 2003-2550 Blue 32 cm x 60 cm 6 Boxes Box of 50 Un.
TACK RAG SPECIAL WATER-BASED PAINT · Anti-Dust Cloth
Anti-dust cloth for cleaning surfaces to be painted with water-based paint. Does not leave resin. Porous fabric designed to trap dust. Comes in individual bags.
Ref. 2003-1030 White 50 cm x 75 cm 6 Boxes Box of 50 Un.
TACK RAG · Anti-Dust Cloth
White anti-dust cloth. Does not leave resin nor fibre marks. Comes in individual bags.
Ref. 2004-0001 Dispenser for paper rolls and polytex 1 Un.
Paint Preparation System
Paint Preparation System
43
7
Ref. 2012-1420 Cup 385 ml 200 Un.
Ref. 2012-1440 Cup 750 ml 200 Un.
Ref. 2012-1500 Cup 1400 ml 200 Un.
Ref. 2012-1520 Cup 2300 ml 100 Un.
Ref. 2012-1430 Lid 385 ml 200 Un.
Ref. 2012-1450 Lid 750 ml 200 Un.
Ref. 2012-1510 Lid 1400 ml 200 Un.
Ref. 2012-1530 Lid 2300 ml 200 Un.
MIXING CUPS & LIDS
Disposable mixing cups for precise preparation of all types of paint. Air-tight seal. Scale from 1:1to5:1.
Ref. 2012-1421 Cup+Lid 0,5 l 100 Un.
Ref. 2012-1422 Cup+Lid 1 l 100 Un.
Ref. 2012-1423 Cup+Lid 1,8 l 100 Un.
PAINT PLASTIC CUP AND LID
Opaquecupforpreparingpaintaccordingtoweight,andforconservingit.Lightresistant.
Ref. 2012-2390 Cup 600 ml 200 Un.
PAPER MIXING CUP
Disposable paper mixing cup.
Paint Preparation System
44
DISPOSABLE MIXING STIRRERS CRS
Disposable mixing sticks for paint.
Ref. 2012-1333 20 cm 4 Boxes Box of 500 Un.
MIXING RULER CRS
Mixing ruler for HS Filler 4:1 and Star Lack LVC 2:1.
Ref. 2012-1334 5 Un.
PAPER PAINT STRAINERS
Disposable paper strainers for paint, with a nylon mesh.
Ref. 2006-70103 190 Microns 1 Box 1000 Un.
Ref. 2006-70104 125 Microns 1 Box 1000 Un.
PLASTIC PAINT STRAINERS
Washable and reusable plastic strainers for paint, with a nylon mesh.
Ref. 2006-2590 Mesh 2000 Water-based paints 25 Un.
Ref. 2006-1060 Mesh 5000 - 25 Un.
Ref. 2006-1070 Mesh 10000 - 25 Un.
Paint Preparation System
45
7
MICROBRUSH REGULAR BLUE · Disposable Brushes
Disposable brushes with a flexible tip for precision retouching work. Securely capped to guarantee hygiene.
Ref. 1008-2000 Dispenser of 100 units 4 Boxes
OX-EAR HAIR PAINT BRUSHES
Paint brushes for retouching. Available in different sizes.
Ref. 2004-4040 Paintbrushnº0 12 Un.
Ref. 2004-4050 Paintbrushnº1 12 Un.
Ref. 2004-4060 Paintbrushnº2 12 Un.
Ref. 2004-4070 Paintbrushnº4 12 Un.
Ref. 2004-4080 Paintbrushnº6 12 Un.
Ref. 2004-4090 Paintbrushnº8 12 Un.
Ref. 2004-5000 Paintbrushnº10 12 Un.
Ref. 2004-5010 Paintbrushnº12 12 Un.
Ref. 2004-5020 Paintbrushnº14 12 Un.
MINI BOTTLE FOR PAINT SAMPLE
Bottleforpaintsamples:60ml.
Ref. 2004-7025 Bottle with paint brush 60 ml 1 Box 50 Un.
Paint Preparation System
46
GRAVITY FILTER
Filter for paint gravity gun.
Ref. 2006-1050 1 Box 12 Un.
METALIC SUCTION FILTER
Metallic suction filter.
Ref. 2006-2290 1 Box 12 Un.
PLATES FOR PAINT SAMPLES
Metallicplate(105mmx150mm)withablackmiddlebandforpaintsamples.
Ref. 2004-1690 1 Bag 200 Un.
UNIVERSAL SUCTION FILTER
Filter for universal suction gun.
Ref. 2006-1040 Medium filter 12 Un.
Ref. 2006-2200 Largefilter 12 Un.
Paint Preparation System
7
Compounding Repair / Vehicle Polishing, Buffering and Protection
Compounding Repair – Vehicle Polishing, Buffering and Protection
49
8
Ref. 5010-0001 1Kg 1 Box 6 Un.
DIAMOND 1500
Fast cut polishing compound especially indicated for new generation clear coats and finishes.UsedwiththeDiamond1500pad,itschemicalpropertyasemulsionpermitsto obtain a perfect cut and high gloss finish in one step. Removes easily any sanding marksfromgrit1500.Providesadeepbrightness.
Ref. 2004-0101 Blue 1 Box 12 Un.
DIAMOND 1500 WOOL PAD
BluewoolpadtobeusedwithDiamond1500polishingcompound.Mediumdensityfibertoremoverapidlyanysandingmarksfromgrit1500providingahighglosslevel.
Ref. 5010-0002 1Kg 1 Box 6 Un.
QUARTZ 2500
Medium cut polishing compound indicated to restore paints losing their original gloss,not completely curedclear coatsor to remove sandingmarks fromgrit 2500.RecommendedtobeusedwiththeQuartz2500padforaprofessionalresult.
Ref. 5010-0003 1 l 1 Box 6 Un.
CRYSTAL 4000
Highglosspolishingcompoundprovidingalastingfinishwithanycarbodypolishingprocess. Application by hand or machine. Recommended to be used with the Crystal 4000pad.
Ref. 2004-0103 Black 1 Box 12 Un.
CRYSTAL 4000 FOAM PAD
Low density foam polishing pad. Its innovating polishing surface, in striated relief,retains the emulsion inside the surface to avoid any splashing or loss of product. This special striated surface reduces the formation of holograms as preventing the same pattern to be drawn twice.
Ref. 2004-0102 Yellow 1 Box 12 Un.
QUARTZ 2500 FOAM PAD
Medium density foam polishing pad. Its innovating polishing surface, in striated relief, retains the emulsion inside the surface to avoid any splashing or loss of product. This special striated surface reduces the formation of holograms as preventing the same pattern to be drawn twice.
Ref. 5010-0004 1 l 1 Box 6 Un.
ECLIPSE
Perfumed protective wax that seals and protects recent polished or painted surfaces. Seals the surface avoiding dust, water or any other contaminants deposit that could prematurely wear out the gloss. Can be used on the whole car body, glasses, painted plastics.RecommendedtobeappliedbyhandwithourYellowMicrofibreClothCRS.
Compounding Repair – Vehicle Polishing, Buffering and Protection
50
Ref. 5010-1124 Sprayer 1 l 16 Un.
Ref. 5010-1046 Cylinder 5 l 6 Un.
QUICK POLISH MOON · Protective Wax
Polishsprayforfreshorjust-polishedpaints.Getsridofpolishresidueswhileprovidinglong-lasting protection, so producing a thorough and long-lasting wet-look effect. It is recommended to apply by hand with a microfibre cloth.
Ref. 5009-1305 Kit 1 Un.
MATT PROTECT KIT
Two-component nanometric system for matt finish paint protection. Creates an invisible protective film on the surface, avoiding a progressive waste of matt clear coats.
Ref. 5009-1304 Cylinder 5 l 2Kits
CLEAR CAR MATT
Liquidsoapformattfinishsurfaces.Doesnotfoam.Applymanuallyusingamicrofibreglove. Kit composedby a 5 l cylinder ofClear Car Matt, the applying spray and the special glove.
Compounding Repair – Vehicle Polishing, Buffering and Protection
51
8
Ref. 2004-0104 Beige 6,5” 6 Un.
CARS MEDIUM POLISHING PAD
Medium hardness foam polishing pad. Its innovating polishing surface, in striated relief, retains the emulsion inside the surface to avoid any splashing or loss of product. This special striated surface reduces the formation of holograms as preventing the same pattern to be drawn twice.
Ref. 2004-7000 White 6” 12 Un.
CARS POLISHING PAD
White polishing pad. Hook & Loop system.
Ref. 2004-7001 Black 6” 12 Un.
CARS BUFFING PAD
Black buffing pad. Hook & Loop system.
Ref. 2004-7002 Black 14 mm 6” 12 Un.
CARS POLISHER PLATE
Place to be used with polishing and buffing sponges. Hook & Loop system.
Electric polisher for general polishing and buffering works. Plate included.
Ref. 1014-5020 1 Un.
ELECTRIC POLISHER CRS DS13-1 1200 W
VoltagePower SpeedWeightCable length
VWrpmgm
220/2401200600/300021006
Compounding Repair – Vehicle Polishing, Buffering and Protection
52
Ref. 8010-0001 1 Un.
CRS DECONTAMINATION MITT
Oneside,microfibermittandtheotherside,rubbermittcoatedwithhightechnologypolymer for eliminating contaminants during the car wash. Suitable for eliminating contaminants before painting, polishing or waxing.
Ref. 2003-7029 Yellow 40 cm x 40 cm 1 Box 10 Un.
MICROFIBRE CLOTH
Microfibre cloth with multiple uses: cleaning, polishing and absorption.Seams are protected so as not to leave streaks. Useful for manual application of polishes. It is the most recommended option for final cleaning of polished surfaces. Washable and long lasting.
Ref. 2004-2770 135 mm x 30 mm x 95 mm 10 Un.
CELLULOSE SPONGE
Spongemanufacturedfromvegetableextracts.100%biodegradable.
Ref. 2004-2760 215 mm x 65 mm x 120 mm 10 Un.
JUMBO SPONGE
Strongly absorbent and long-lasting nylon sponge.
Ref. 2003-1010 White Roll 28 cm x 40 cm 1 Box 250 Un.
SOFTEX · Polishing and Buffering Cloth
Special non-woven cloth for polishing and buffering. Strong absorption power and very soft. Does not leave dust. Antistatic.
Compounding Repair – Vehicle Polishing, Buffering and Protection
53
8
Ref. 2004-85840 1 Un.
PAINT RUN REMOVER
Entirely redesigned blade made of a special material, used to cut off and remove drops, runs and specks from painted surfaces.
Ref. 2004-7089 1 Un.
PAD CLEANER TOOL
Tool for cleaning woollen polishing pads.
Ref. 2004-2670 1 Un.
HYDRA FLEXI BLADE · Surface Drying Tool
Specific tool for drying all types of surfaces. Save time in auto drying thanks to its flexible silicone blade that adapts to any surface.
Ref. 1007-5001 Kit - 1 Un.
Ref. 9004-1072 Plate 30 mm 1 Un.
Ref. 9004-1071 Plate 75 mm 1 Un.
SMART REPAIR KIT
·Minisandingmachine–pneumaticpolishingmachine
Kitformendingminorimperfectionsandsmallexpressrepairs.Contains:
Length
Weight
Orbit
Plates
Maximum Speed
Air Consumption
Entry thread diameter
· 30 mm plate
· 75 mm plate
· Smart Repair Compounding Foam 3’’
· Smart Repair Polishing Foam 3’’
· Air regulator
· Spare plate
· Dismantling spanner key set
·DisquesF1BlueLine75mm(P1200,1500,2500and3000).Samples.
·DisquesF1BlueLine35mm(P1500,2500and3000).Samples.
109 mm x 47 mm
340 g
3 mm
75and35mm/M6
16500 rpm
368l/m
¼
Car Care / Car Cleaning, Care and Protection
Car Care – Car Cleaning, Care and Protection
55
9
Ref. 8010-0002 Sprayer 250 ml 1 Box 6 Un.
LEATHER CARE
Moisturizing cream suitable for natural leather or synthetic vinyl. Deeply nourishes the dry and dehydrated leather to be restored to its original appearance.
Ref. 8010-0003 Tube 75 ml 1 Box 12 Un.
LEATHER CLEANER
Active cleaner for aged or damaged leather. Removes dirt buildup and slightly polishes the worn surface. Must be used with Leather Care for surface rehydrating and to complete the treatment.
Ref. 8010-0004 Sprayer 250 ml 1 Box 12 Un.
PLASTIC CARE
Regenerating compound for any plastic surface. Nourishes and renews the aged plastics.
Ref. 8010-0005 Tube 75 ml 1 Box 12 Un.
PLASTIC CLEANER
Plastic cleaner especially indicated for interior plastic surfaces. Removes dirt buildup and glass enhancer rests having formed with time a superficial film, which avoids the inside of the car to keep a clean appearance.
Car Care – Car Cleaning, Care and Protection
56
Ref. 8010-0006 Bottle 250 ml 1 Box 12 Un.
METAL POLISH LIQUID
Liquidpolishingcompoundforcleaningandremovingdirtandpollutantsovermetallicor stainless surfaces.
Ref. 8010-0007 Sprayer 500 ml 1 Box 12 Un.
GLASS CLEANER EXTRA STRONG
Liquidcleaninganddescalingcompoundforglass.Easilyremovesresinsandinsectsremainders.
Ref. 8010-0008 Sprayer 500 ml 1 Box 12 Un.
WHEEL CLEANER EXTRA STRONG
Detergent to remove brake pads residues, oils and others pollutants from the rims and carunderside.Highdescalingformula.
Ref. 8010-0009 Sprayer 250 ml 1 Box 12 Un.
TIRE SHINE
Tire shine that gives a long lasting shine without grease buildup.
Ref. 8010-0010 Sprayer 500 ml 1 Box 12 Un.
INSECT REMOVER EXTRA STRONG
Detergent to eliminate insect remainders, resins and other pollutants from car bodywork.Highdescalingformula.
Car Care–Car Cleaning, Care and Protection
9
57
REQUIRED COMPLEMENTS FOR ITS APPLICATION:
Ref. 8010-0001 1 Un.
CRS DECONTAMINATION MITT
Ref. 2003-7029 Yellow 40 cm x 40 cm 1 Box 10 Un.
MICROFIBRE CLOTH
Ref. 2003-1010 White Roll 28 cm x 40 cm 1 Box 250 Un.
SOFTEX · Polishing and Buffering Cloth
Ref. 2004-2670 1 Un.
HYDRA FLEXI BLADE · Surface Drying Tool
Masking System & Protection
Masking System & Protection
59
10
Plastic film with double protection. Inside sticks electrostatically to the surface to protect. Resiststemperaturesofupto120ºC.Designedforpaintingwithanypaintsystem.Waterproof25mmmaskingtapethatdoesnotleaveglueresidue.
Ref. 2001-3525 35 cm x 25 m 20 Un.
Ref. 2001-6025 60 cm x 25 m 20 Un.
Ref. 2001-2580 90 cm x 25 m 20 Un.
Ref. 2001-12025 120 cm x 25 m 20 Un.
Ref. 2001-18025 180 cm x 25 m 20 Un.
Ref. 2001-1330 35 cm x 25 y 20 Un.
Ref. 2001-1340 60 cm x 25 y 20 Un.
Ref. 2001-1350 90 cm x 25 y 20 Un.
Ref. 2001-1360 120 cm x 25 y 20 Un.
Ref. 2001-1370 180 cm x 25 y 20 Un.
PLASTIC FILM WITH MASKING TAPE
Ref. 2001-1581 400 cm x 300 m 10 microns - 20 Un.
Ref. 2001-1582 400 cm x 150 m 10 microns - 20 Un.
Ref. 2001-1583 400 cm x 150 m 24 microns HighTemperature(HT)200ºC 20 Un.
MASKING FILM OF 4 M
Plasticfilm(10and24-micronsformat)forquickmaskingofcarbodywork.Theoutsidehas been treated with special products so as to guarantee paint spray adhesion. The inside sticks electrostatically to the car body. The outside has the brand’s name printed on so as to allow for correct laying.
Ref. 2004-1184 1 Un.
MAGNETIC STAND FOR FILM
Magnetic stand to place directly a film roll over the painting cabin walls. Shorten the spaceandtheworktime.Forfilmfrom150to300metres.
Ref. 2004-1186 1 Un.
MASKING FILM DISPENSER
Mobile dispenser for film rolls. Easily transportable and highly durable.
Ref. 2004-4010 10 Un.
CUTTING PLASTIC “POLYCUT” BLADE
Blade designed especially for precise cutting of masking plastic film.
Masking System & Protection
60
Ref. 2001-2440 25 m 1 Un.
PERFECT FOAM “T”
Auto-adhesive masking foam tape in the shape of a “T”. The middle of its basis is composed by an adhesive part resisting to drying temperatures of infrared dryers, endothermic panels or air heating. Both sides of the “T” are lightly elevated to obtain an homogeneous and invisible spray application. Ideal for areas with small spaces.
Ref. 2001-2450 50 m 1 Un.
TRIANGULAR MASKING FOAM TAPE
Adhesiveless foam tape in the shape of a triangle and indicated to avoid the fillers spraying to pass through the panels gaps such as doors gaps, hoods, car boots… To apply it easily, place it into the gaps and just pressure on it with no need of opening the doors. The few remaining spray mist would be easily removed during the sanding process.
Ref. 2001-2480 35 mm x 28 m 10 Un.
2 IN 1 MASKING FOAM TAPE
Double function foam tape that allows a unique application for a two step process. Composed by an outer perforated part and another inner adhesive one. During a wet on wet application, the external part avoids particles build up in the gaps between panels.The outer piece has to be removed before applying the paint; the inner adhesive piece could then be used as a standard masking foam tape.
Ref. 2001-2490 22 mm x 35 m 10 Un.
PRIME PROTECT MASKING FOAM TAPE
Ovaladhesivelessfoamtapecomposedoftwodifferentsizesparts,touseaccordingthe working process. Specifically indicated for outer application when there is a need to open doors, hoods or boots. Introduce between the vehicle gaps with the door closed and put a slight pressure on it. Fast and efficient working process.
Ref. 2001-2460 13 mm x 50 m 1 Un.
Ref. 2001-2470 18 mm x 40 m 1 Un.
AUTOADHESIVE MASKING FOAM TAPE
Auto-adhesivemaskingfoamtapemadeofpolyesterfoamwitha28kg/m3 density, for masking doors, boots, bonnets or any other openings.
Masking System & Protection
61
10
Ref. 2001-1860 40 g 45 cm x 400 m 1 Un.
Ref. 2001-1870 40 g 60 cm x 400 m 1 Un.
Ref. 2001-1880 40 g 90 cm x 400 m 1 Un.
Ref. 2001-1890 40 g 120 cm x 400 m 1 Un.
KRAFT MASKING PAPER
Masking paper. Treated so as not to let paint or clear coat pass through. Each measure comes in an individual bag. Weight:40g/m2.
Ref. 2002-1730 18 mm x 45 m Box of 96 Un.
Ref. 2002-1740 24 mm x 45 m Box of 72 Un.
Ref. 2002-1750 36 mm x 45 m Box of 48 Un.
Ref. 2002-1760 48 mm x 45 m Box of 36 Un.
MASKING TAPE
Professionaltapeforvehiclemasking.Resistsupto80ºCfor30minutes.Doesnotleaveglue residue.
Ref. 2002-7020 18 mm x 45 m Box of 48 Un.
Ref. 2002-7021 24 mm x 45 m Box of 36 Un.
Ref. 2002-7022 36 mm x 45 m Box of 24 Un.
Ref. 2002-7023 48 mm x 45 m Box of 24 Un.
“TOP” MASKING TAPE
Professional tape for vehiclemasking. Resists up to 100ºC for 30minutes.Does notleave glue residue.
Ref. 2002-1000 19 mm x 50 m Box of 48 Un.
Ref. 2002-0012 50 mm x 50 m Box of 16 Un.
EU ORANGE MASKING TAPE
Highperformancetapeforvehiclemasking.Strongadhesiononmetal,glass,plasticandrubber.ResistsUVrays.Doesnotleaveglueresidue,evenaftera6-monthapplicationperiod.Resistsupto100ºCfor30minutes.
Masking System & Protection
62
Ref. 2002-3071 10 mm x 10 m 12 Un.
Ref. 2002-3072 15 mm x 10 m 12 Un.
Ref. 2001-1570 20 mm x 10 m 10 Un.
PRE-CUT LIFTING TAPE
Plastic strip on auto-adhesive tape for masking new windscreens and windowpanes. Pre-cut and very flexible for easy masking of curves.
Ref. 2002-3080 25 mm x 14 m 10 Un.
STRIPPING TAPE
Specialoutliningtapeforvehiclemasking. Itcomeswithpre-cut,1-mmbandssoastoobtainmultiplecombinations.Veryflexible.Anyshapeeasilycovered.Littlepaintaccumulation.
Ref. 2002-1990 50 mm x 50 m 18 Un.
ALU TAPE
Silver, woven tape, covered by a protective film with strong adhesion power. Waterproof and abrasive-resistant.
Ref. 2002-11921 3 mm x 66 m 10 Un.
Ref. 2002-11922 6 mm x 66 m 10 Un.
Ref. 2002-11923 9 mm x 66 m 10 Un.
Ref. 2002-11924 12 mm x 66 m 10 Un.
Ref. 2002-11925 19 mm x 66 m 10 Un.
Ref. 2002-11970 25 mm x 55 m 10 Un.
LIFTING TAPE
Outliningtapeforvehiclemasking.Doesnotcrumplenorfoldupatcorners.Followscurvesperfectlyandadaptstoanyshape.Littlepaintaccumulation.
Masking System & Protection
63
10
Ref. 2001-1585 Roll 150 mm x 5 m 1 Un.
TEXTURED ADHESIVE PLASTIC
Auto-adhesive tape with a textured finish that imitates original finish on some model door frames. Easy to apply.
Ref. 2001-1470 Roll 1 Un. 50 sheets
DOOR SKIN PLASTIC SHEET
Pre-cut plastic sheet for protecting interior door panels so as to obtain an original finish. Protects against humidity and soundproofs the vehicle. Therollispre-cutinto50sheetsof700mmx1m.
Ref. 2002-1780 6 mm x 10 m 10 Un.
Ref. 2002-0910 9 mm x 10 m 10 Un.
Ref. 2002-1210 12 mm x 10 m 10 Un.
Ref. 2002-1910 19 mm x 10 m 10 Un.
Ref. 2002-2510 25 mm x 10 m 10 Un.
DOUBLE-SIDED TAPE
Double-sided adhesive tape recommended for fixing moulds, emblems and accessories.
Ref. 2002-5006 9 mm x 10 m 10 Un.
Ref. 2002-5007 12 mm x 10 m 10 Un.
Ref. 2002-5008 19 mm x 10 m 10 Un.
DOUBLE-SIDED ACRYLIC TAPE
Double-sided adhesive tape recommended for fixing moulds, emblems and accessories. Resists high temperatures. Strong adhesion on metal, glass and most plastics.
Masking System & Protection
64
Ref. 2001-1480 Roll 650 mm x 50 m 1 Un.
DOOR SKIN REPLACEMENT FILM
Pre-cut adhesive plastic sheet for protecting interior door panels so as to obtain an original finish when repaired. Protects against humidity and soundproofs the vehicle.
Ref. 2001-1490 Roll 600 mm x 10 m 1 Un.
DOOR SKIN REPLACEMENT FOAM
Auto-adhesive foam for protecting interior door panels so as to obtain an original finish when repaired. Protects against humidity and soundproofs the vehicle.
Ref. 2001-2370 10 Packs Pack of 4 Un.
WHEEL COVER-PP
Reusablewheelcover.Resistantfabric.Onesizefitsall.
Ref. 2001-1410 1 Roll 250 Un.
WHEEL COVER-PLASTIC
Disposable wheel cover made of transparent plastic.
Masking System & Protection
65
10
Ref. 2011-1394 820 mm x 1350 mm 1 Roll 500 Un.
SEAT COVER
Seat cover with a non-slip inside and a non-sticky outside.Highresistancetotearing.13microns.
Ref. 2011-1392 490 mm x 150 mm 1 Roll 500 Un.
STEERING WHEEL COVER
Disposable13-micronrugforprotectingrugsandcarpetsduringrepair.
Ref. 2011-1395 400 mm x 550 mm 1 Roll 500 Un.
PAPER PROTECTING CARPET
Disposable13-micronrugforprotectingrugsandcarpetsduringrepair.
Ref. 2011-1396 6,3 m x 4 m 1 Roll 25 Un.
PLASTIC CAR COVER
Pre-cut covers dispensed in a roll, for vehicle protection.
Ref. 2011-1397 140 cm x 140 cm 1 Pack Pack of 8 Un.
WHEEL RIM PROTECTOR FOR PAINTING
Tyre protector for wheel rim painting. This new solution allows for tyre masking without having to dismantle the entire wheel. The wheel needs deflating slightly, then the opening edge of the cover can be fixed under the wheel rim, then the cover can be adjusted to the whole tyre. There is no need for masking tape nor paper, so reducingmaskingprocessfrom15minutestojust2!Thankstoitsecopolimericnature,the cover is very flexible and adapts to all types of tyres, including those of trucks and buses.20microns.
Personal Protection Equipment
Personal Protection Equipment
67
11
Ref. 2015-1001 30 Un.
MASK SUPERONE 3203 (5185) FFP1 · Valve-free Anti-Dust Mask
Disposable hard mask. Filtration capacity FFPI.
Ref. 2015-1000 20 Un.
MASK SUPERONE 3206 (5211) FFP2 · Anti-Dust Mask with Valve
Disposablehardmaskwithavalveandadjustablenoseseal.FiltrationcapacityFFP2.
Ref. 2015-1002 12 Un.
MASK CLASSIC CRS (5209) FFP2 · Anti-Dust Mask with Valve
Disposablemaskwithavalveandadjustablenoseseal.FiltrationcapacityFFP2.
Ref. 2015-1003 20 Un.
MASK CLASSIC CRS (5110) FFP2 · Valve-free Anti-Dust Mask
Disposablevalve-freemaskwithanadjustablenoseseal.FiltrationcapacityFFP2.
Ref. 2015-1004 12 Un.
FOLDED MASK CRS (4211) FFP2 · Anti-Dust Mask with Valve
Disposablefoldedmaskwithavalveandadjustablenoseseal.FiltrationcapacityFFP2.
Personal Protection Equipment
68
Ref. 2015-1006 5230 FFA2P3 - 1 Un.
Ref. 2015-1005 5120 FFA1P2RD - 1 Un.
Ref. 2015-1007 Pre-filter 5991 1 Pack 10 Un.
MOLDEX COMPACT MASK
Light and comfortablemask.Others personal protection equipmentsmaybeworn:solder mask, glasses, etc. The exhalation valve has big openings to optimize the air circulation. Better visibility and perfect respiratory protection thanks to an horizontal lining up of the filters.
Ref. 4001-5595 20 Un.
MASK 5251 · Mask for Protection against Solid Particles
Maskwithavalve.ComplieswithEN149:2000standards,filtrationcapacityFFP2(D)againstwelding fumes, organic steams, etc. Edges: boomerang. Nose seal: brown.
Ref. 4001-1573 1 Un.
VALUAIR PLUS MASK · Mask for Protection against Solid Particles
Mask made of elastomeric rubber to be used with bayonet-mounted filters. Frontal exhalation valve. Can be used with graduate or protective eyewear.
Ref. 4001-1583 Bayonet-mountedfilter/A2P3 (A) 2 Un.
Ref. 4001-1619 Bayonet-mountedfilter/A1 (B) 2 Un.
Ref. 4001-2800 Pre-filter P1 (C) 20 Un.
Ref. 4001-2801 Pre-filter P2 (D) 20 Un.
Ref. 4001-1590 Retainer (E) 20 Un.
VALUAIR PLUS FILTER
Ref. 4001-1592 A1P1 1 Un.
Ref. 4001-1591 A2P3 1 Un.
FREEDOM MASK · Mask for Protection against Solid Particles
Long-lastingdisposablemask.Canbeusedwithgraduateorprotectiveeyewear.AvailablewithA1P1/A2P3filters.
Personal Protection Equipment
69
11
Ref. 2009-2330 Plastic PP 100 Un.
Ref. 2009-2340 TYVEK®white 100 Un.
Ref. 2009-1680 Non woven 100 Un.
Ref. 2009-2310 Plastic PP 100 Un.
Ref. 2009-2320 TYVEK® 100 Un.
HOOD FOR PAINTER
SHOES COVER
Ref. 4002-2783 10 Un.
FOGBAN BLUE GLASSES · ProtectiveGlasses
Protective glasses with a one-piece wraparound polycarbonate lens, coated for resisting superficial damage. Shock-resistant polyamide frame.Ocularprotectionspecification:EN166-F,3-1.2D1F.
Ref. 4003-5821 1 Un.
BLUE COMFORT EARMUFFS
Earmuffs with three-position adjustable headband, highly comfortable even over extended periods of use. For moderate sound levels. Can be used while wearing other protective accessories such as masks, face shields or hard hats. SNR26dB.
Ref. 4002-6193 10 Un.
Ref. 4002-6437 Pack 10 Un.
V-MAXX GLASSES · ProtectiveGoggles
V-MAXX LENS PROTECTIVE FILM
Indirect vented goggles with a Fogban® anti-fog lens and elastic headband. Can be used over prescription eyewear. With small hooks for holding protective film. Ocularprotectionspecification:3-1.21B349.
Disposable protective lens with a polyester cover to be used on V-Maxx goggles.
Personal Protection Equipment
70
Ref. 2009-1005 Size M 1 Un.
Ref. 2009-1006 SizeL 1 Un.
Ref. 2009-1007 SizeXL 1 Un.
Ref. 2009-1008 SizeXXL 1 Un.
POLYESTER WHITE COAT
Breathable polyester coat with adjustable sleeves and front pocket.
Ref. 2009-10001 Size M 1 Un.
Ref. 2009-10002 SizeL 1 Un.
Ref. 2009-10003 SizeXL 1 Un.
Ref. 2009-10004 SizeXXL 1 Un.
POLYESTER OVERALL
Painter’s hooded coverall with elastic at wrists, waist and hood.
Ref. 2009-0090 Size M 1 Un.
Ref. 2009-0100 SizeL 1 Un.
Ref. 2009-0110 SizeXL 1 Un.
Ref. 2009-0120 SizeXXL 1 Un.
TYVEK PRO-TECH® OVERALL
Painter’s hooded coverall with elastic at wrists, waist and hood. Complies with EU standards for personal protection gear, category II.
Ref. 4005-11433 Size M 1 Un.
Ref. 4005-21433 SizeL 1 Un.
Ref. 4005-31433 SizeXL 1 Un.
Ref. 4005-41433 SizeXXL 1 Un.
MUTEXIL® OVERALL
Painter’shoodedcoverall,madeofwhitenon-wovenpolypropylene(30g/m2)materialwith a waterproof and breathable coating. Antistatic properties on both inside and outside.
Personal Protection Equipment
71
11
Ref. 2010-2491 Size M 10 Pairs
Ref. 2010-2492 SizeL 10 Pairs
Ref. 2010-2493 SizeXL 10 Pairs
WORKEASY BLACK GLOVES · ProtectiveGloves
Polyesterglovescoveredontheinside(palmandfingers)byathinlayerofblackpolyurethanethat waterproofs the area and keeps dust and oil from penetrating, allowing full touch.Breathable and elastic.
Ref. 4004-2244 Size M 10 Pairs
Ref. 4004-2245 SizeL 10 Pairs
Ref. 4004-2246 SizeXL 10 Pairs
PERFECT CUTTING GLOVES · ProtectiveGloves
Whiteknitglovescoveredontheinside(palmandfingertips)byathinlayerofpolyurethane.Suitable for manipulating sharp pieces in either dry or greasy conditions. Allows full touch.Donotexposetoheat:CEEN420.
Ref. 4004-0250 Size M 10 Pairs
Ref. 4004-0251 SizeL 10 Pairs
Ref. 4004-0252 SizeXL 10 Pairs
POLY GREY GLOVES · ProtectiveGloves
Lightweightgloveswithfull touchforhandlingdelicatepieces.Madeofgreypolyamide.Gauge:15.Coveredontheinside(palmandfingertips)byathinlayerofgreypolyurethane.
Ref. 2010-2660 Size M 10 Boxes Box of 100 Un.
Ref. 2010-2220 SizeL 10 Boxes Box of 100 Un.
Ref. 2010-2670 SizeXL 10 Boxes Box of 100 Un.
CARS NITRILE GLOVES · ProtectiveGloves
Gloveshighlyresistanttothinner.AQL1.5.
Ref. 2010-1711 Size M 10 Boxes Box of 100 Un.
Ref. 2010-1710 SizeL 10 Boxes Box of 100 Un.
Ref. 2010-1712 SizeXL 10 Boxes Box of 100 Un.
CARS LATEX GLOVES · ProtectiveGloves
Single-uselatexgloves.AQL1.5.
Personal Protection Equipment
72
Ref. 2010-2487 Size M 10 Boxes Box of 50 Un.
Ref. 2010-2488 SizeL 10 Boxes Box of 50 Un.
Ref. 2010-2489 SizeXL 10 Boxes Box of 50 Un.
TOP PRO GLOVES · ReinforcedLatexGloves
Reinforced elastic latex gloves highly resistant to chemical products, especially cleaning solvents. Thickness:13Microns.Fitseitherhand.
Ref. 4004-5020 SizeL 10 Pairs
Ref. 4004-5021 SizeXL 10 Pairs
NEOPRENE GLOVES PERFECT FIT · ProtectiveGloves
Neoprene gloves with flockered cotton inside and non-slip finish. Thickness:0,6mm.Suitablewhenhandlingbatteries,aswellascertainthinnedacids.CEEN420.
Ref. 5013-1154 Bucket 4 kg 4 Un.
QUICK HAND CLEANER · HandCleaningPaste
Hand cleaning paste with great cleansing action for all types of cleaning. Apply ameasure of Quick Hand Cleaner over wet hands, extend and rinse off with abundant water.Doesnotcontainmineralabrasives.90%biodegradable.
Ref. 4004-4831 10 Pairs
NITRILE GLOVES PERFECT FIT · ProtectiveGloves
Nitrile glove with flockered cotton inside and non-slip finish. Polyvalent chemical resistance. Thickness:0,5mm.CEEN420.
Ref. 4004-4401 10 Pairs
LATEX GLOVES PERFECT FIT · ProtectiveGloves
Natural latex gloves with flockered cotton inside, non-slip finish. Thickness: 0,42 mm. Suitable when handling compound materials and lightweightobjectsinawetenvironment.CEEN420.
Personal Protection Equipment
11
Abrasives
Abrasives
75
12
Abrasive disc on flexible plastic backing: high quality output. Velcro system. 15 Holes.Diameter:150mm.Discsareavailablein100units’boxes.Salesunit:6boxes.
Ref. 2014-6114 150 mm P80
Ref. 2014-6115 150 mm P100
Ref. 2014-6116 150 mm P120
Ref. 2014-6117 150 mm P150
Ref. 2014-6118 150 mm P180
Ref. 2014-6119 150 mm P220
Ref. 2014-6120 150 mm P240
Ref. 2014-6122 150 mm P320
Ref. 2014-6133 150 mm P360
Ref. 2014-6123 150 mm P400
Ref. 2014-6124 150 mm P500
Ref. 2014-6125 150 mm P600
Ref. 2014-6126 150 mm P800
Ref. 2014-6127 150 mm P1200
Ref. 2014-6153 150 mm P1500
Ref. 2014-6128 150 mm P2000
Ref. 2014-6129 150 mm P2500
Ref. 2014-6130 150 mm P3000
F1 BLUE LINE DISC
Abrasive disc on flexible plastic backing: high quality output. Velcro system. No holes. Diameter:75mm.Discsareavailablein100units’boxes.Salesunit:1box.
Ref. 2014-6085 75 mm P80
Ref. 2014-6086 75 mm P120
Ref. 2014-6087 75 mm P150
Ref. 2014-6088 75 mm P180
Ref. 2014-6089 75 mm P240
Ref. 2014-6090 75 mm P320
Ref. 2014-6091 75 mm P360
Ref. 2014-6092 75 mm P400
Ref. 2014-6093 75 mm P600
Ref. 2014-6109 75 mm P800
Ref. 2014-6110 75 mm P1200
Ref. 2014-6111 75 mm P1500
Ref. 2014-6112 75 mm P2000
Ref. 2014-6113 75 mm P2500
Ref. 2014-6152 75 mm P3000
F1 BLUE LINE DISC
Abrasivedisconflexibleplasticbacking:highqualityoutput.Velcrosystem.Diameter:35mm. No holes.
Ref. 2014-6150 35 mm P1500 100 Un.
Ref. 2014-6131 35 mm P2000 100 Un.
Ref. 2014-6132 35 mm P2500 100 Un.
Ref. 2014-6151 35 mm P3000 100 Un.
F1 BLUE LINE MINI DISC
Abrasivedisconspongebacking.Diameter:150mm.15Holes.
Ref. 2107-1017 150 mm Fine grit 15 Un.
Ref. 2107-1018 150 mm Superfine grit 15 Un.
Ref. 2107-1019 150 mm Microfine grit 15 Un.
FOAM F1 LINE DISC
Abrasives
76
Traditionalabrasivediscsystemonpaperbacking.Velcrofixingsystem.Diameter:150mm.15Holes.Discsareavailablein100units’boxes.Salesunit:6boxes.
Ref. 2014-6136 150 mm 15Holes P80
Ref. 2014-6137 150 mm 15Holes P100
Ref. 2014-6138 150 mm 15Holes P120
Ref. 2014-6139 150 mm 15Holes P150
Ref. 2014-6140 150 mm 15Holes P180
Ref. 2014-6141 150 mm 15Holes P220
Ref. 2014-6142 150 mm 15Holes P240
Ref. 2014-6144 150 mm 15Holes P320
Ref. 2014-6145 150 mm 15Holes P360
Ref. 2014-6146 150 mm 15Holes P400
Ref. 2014-6147 150 mm 15Holes P500
Ref. 2014-6148 150 mm 15Holes P600
Ref. 2014-6149 150 mm 15Holes P800
F1 GOLD LINE + DISC
Roll of sandpaper on foam backing.
Ref. 2007-7085 115 mm x 25 m P240 1 Un.
Ref. 2007-1290 115 mm x 25 m P320 1 Un.
Ref. 2007-1300 115 mm x 25 m P400 1 Un.
Ref. 2007-1310 115 mm x 25 m P500 1 Un.
Ref. 2007-6014 115 mm x 25 m P600 1 Un.
Ref. 2007-1320 115 mm x 25 m P800 1 Un.
F1 GOLD LINE FOAM SANDPAPER
Roll of sandpaper for dry-sanding.
Ref. 2014-6159 115 mm x 25 m P40 1 Un.
Ref. 2014-6154 115 mm x 25 m P60 1 Un.
Ref. 2014-6155 115 mm x 25 m P80 1 Un.
Ref. 2014-6156 115 mm x 25 m P120 1 Un.
Ref. 2014-6158 115 mm x 25 m P240 1 Un.
F1 GOLD LINE DRY SANDPAPER
Abrasives
77
12Abrasive disc on latex-covered paper backing. Presents a double layer of bonding resin and aluminiumoxidegrainofsemi-openstructure.15Holes.Diameter:150mm.Discsareavailablein100units’boxes.Salesunit:6boxes.
Ref. 2014-700080 150 mm P80
Ref. 2014-700100 150 mm P100
Ref. 2014-700120 150 mm P120
Ref. 2014-700180 150 mm P180
Ref. 2014-700220 150 mm P220
Ref. 2014-700280 150 mm P280
Ref. 2014-700320 150 mm P320
F1 STAR LINE DISC
Porous abrasive disc that allows either dust particles to pass when dry-sanding or water whenwet-sanding.Diameter:150and75mm.Noholes.
Ref. 2014-6029 150 mm P500 90 Un.
Ref. 2014-6030 150 mm P1000 90 Un.
Ref. 2014-6031 150 mm P2000 90 Un.
Ref. 2014-6032 150 mm P3000 90 Un.
Ref. 2014-6035 150 mm P4000 90 Un.
Ref. 2014-6033 75 mm P2000 20 Un.
Ref. 2014-6034 75 mm P3000 20 Un.
F1 SKYLON DISC
Very flexible abrasive sponge allowing the sanding on any working area, even on the most difficult ones. Two sides, both recovered by an abrasive surface. Fine and perfect finishing.
Ref. 2007-1248 100 mm x 120 mm Blue Medium grit 50 Un.
Ref. 2007-1249 100 mm x 120 mm Brown Fine grit 50 Un.
Ref. 2007-1250 100 mm x 120 mm Green Superfine grit 50 Un.
Ref. 2007-1251 100 mm x 120 mm Violet Microfine grit 50 Un.
DOUBLE-SIDED ABRASIVE SPONGE
Abrasive sponge for sanding of hard-to-reach areas.
Ref. 2004-1200 115 mm x 140 mm Fine grit 100 Un.
Ref. 2004-1210 115 mm x 140 mm Superfine grit 100 Un.
Ref. 2004-1220 115 mm x 140 mm Microfine grit 100 Un.
Ref. 2004-1240 115 mm x 140 mm Ultrafine grit 100 Un.
ABRASIVE SPONGE
Abrasives
78
Ref. 2007-1080 150 mm x 250 mm Grey Ultrafine 10 Un.
Ref. 2007-1090 150 mm x 250 mm Red Very fine 10 Un.
STAR BRITE SHEET
Synthetic felt to be used on dry or wet surfaces. Ideal for matting.
Ref. 2007-1100 150 mm Grey Ultrafine 15 Un.
Ref. 2007-1110 150 mm Red Very fine 15 Un.
STAR BRITE DISC
Syntheticfelttobeusedondryorwetsurfaces.Idealformatting.Diameter:150mm.No holes.
Ref. 2007-1120 150 mm x 10 m Grey Ultrafine 1 Un.
Ref. 2007-1125 150 mm x 10 m Red Very fine 1 Un.
Ref. 2007-1280 150 mm x 10 m Green Generaluse 1 Un.
STAR BRITE ROLL
Synthetic felt to be used on dry or wet surfaces. Ideal for matting.
Abrasive paper sheet for wet-sanding of paints, clear coats, fillers, etc.Even and uniform sanding.
Ref. 2014-6094 230 mm x 280 mm P220 100 Un.
Ref. 2014-6095 230 mm x 280 mm P240 100 Un.
Ref. 2014-6096 230 mm x 280 mm P280 100 Un.
Ref. 2014-6097 230 mm x 280 mm P320 100 Un.
Ref. 2014-6098 230 mm x 280 mm P360 100 Un.
Ref. 2014-6099 230 mm x 280 mm P400 100 Un.
Ref. 2014-6100 230 mm x 280 mm P500 100 Un.
Ref. 2014-6101 230 mm x 280 mm P600 100 Un.
Ref. 2014-6102 230 mm x 280 mm P800 100 Un.
Ref. 2014-6103 230 mm x 280 mm P1200 100 Un.
Ref. 2014-6104 230 mm x 280 mm P1500 100 Un.
Ref. 2014-6105 230 mm x 280 mm P2000 100 Un.
F1 LINE WET PAPER SHEET
Abrasives
79
12
Rotating pad that gets rid of dust from surfaces and air. Universal system that contains: 2screws,5/16’’andM8.Diameter:150mm.Soft.Velcrosystem.
Ref. 2004-2700 150 mm 6+8+1Holes 1 Un.
Ref. 2004-7071 150 mm 21Holes 1 Un.
MULTI-PAD TWISTER PLATE
Sponge disc to be placed between the abrasive and the pad. Using it while sanding helps to obtainafinercutandtherefore,abetterfinish.Itisrecommendedtousefinegrains(P220andabove)withsuchinterfaces.Thickness:10mm.Velcrosystem.
Ref. 2004-2560 150 mm 6Holes 10 Un.
Ref. 2004-2570 150 mm 9Holes 10 Un.
Ref. 2004-7024 150 mm 15Holes 10 Un.
Ref. 2004-7022 150 mm 21Holes 10 Un.
SOFT INTERFACE · Sponge Disc
HardVelcropadforminisandingmachinesof75-mmdiameter.
Ref. 2004-7099 75 mm 3Holes 1 Un.
SANDING PLATE
Sponge disc to be placed between the abrasive and the pad. Using it while sanding helps to obtainafinercutandtherefore,abetterfinish.Itisrecommendedtousefinegrains(P220andabove)withsuchinterfaces.Noholes.Thickness:10mm.Velcrosystem.
Ref. 2004-2580 75 mm 10 Un.
SOFT INTERFACE 75 MM · Sponge Disc
Abrasives
80
Ref. 1013-0020 GPS304 Ø 5 mm 1 Un.
ROTATING ORBITAL SANDER GPS304
Pneumatic manual rotating orbital sander with dust removal device to connect to hoovers.Equipped with an auto-lock system for changing the pad with no need for keys. Work pressure regulator. Blowholeforblowingairoutduringworkandcleaningafterwork.Plate:150mm.Platenot included.
Ref. 1013-0021 GPS305 Ø 2,5 mm 1 Un.
ROTATING ORBITAL SANDER GPS305
Pneumatic manual rotating orbital sander with dust removal device to connect to hoovers.Equipped with an auto-lock system for changing the pad with no need for keys. Work pressure regulator. Blowholeforblowingairoutduringworkandcleaningafterwork.Plate:150mm.Platenot included.
Ref. 1013-0023 GPS306 Ø 2,5 mm 1 Un.
ROTATING ORBITAL SANDER GPS306
Pneumatic rotating orbital sander for 75-mm pads with an auto-locking system forchanging the pad with no need for keys. Plate not included.
GPS304 GPS305 GPS306
Air pressure atm 6.3 6.3 6.3
Air consumption l/min 270 270 270
Orbitdiameter mm 5 2,5 2,5
Orbitsperminute nº 12000 12000 12000
Dust extractor connection d.mm 29 29 29
Noise level dBA 84 84 81
Weight g 750 750 690
Size cm 20x15x12 20x15x12 17x7x8
Pad diameter mm 150 150 75
Technical Characteristics
Abrasives
81
12
Manual planer. Velcro system with extractor.
Ref. 2004-2260 70 mm x 400 mm 1 Un.
SANDING PLANE WITH DUST EXTRACTION
Manual planer. Velcro system with extractor.
Ref. 2004-2620 70 mm x 198 mm 1 Un.
SANDING PLANE WITH DUST EXTRACTION
Manual planer. Velcro system with extractor.
Ref. 2004-2610 70 mm x 125 mm 1 Un.
SANDING PLANE WITH DUST EXTRACTION
Manual planer. Velcro system with extractor.
Ref. 2004-2270 81 mm x 153 mm 1 Un.
SANDING PLANE WITH DUST EXTRACTION
Manual planer. Velcro system with extractor.
Ref. 2004-2280 115 mm x 230 mm 1 Un.
SANDING PLANE WITH DUST EXTRACTION
Abrasives
82
Flexible abrasive belt: high quality output. Velcro system. Artificial corundum abrasive. Bonder: polymerised Phenolic resin. Bonder additive: calcium carbonate. Backing: paper. 14Holes.
Ref. 2014-6060 70 mm x 420 mm 14Holes P80 100 Un.
Ref. 2014-6061 70 mm x 420 mm 14Holes P120 100 Un.
Ref. 2014-6062 70 mm x 420 mm 14Holes P150 100 Un.
Ref. 2014-6063 70 mm x 420 mm 14Holes P180 100 Un.
Ref. 2014-6064 70 mm x 420 mm 14Holes P220 100 Un.
ABRASIVE SHEET F1 GOLD LINE
Flexible abrasive belt: high quality output. Velcro system. Artificial corundum abrasive. Bonder: polymerised Phenolic resin. Bonder additive: calcium carbonate. Backing: paper. 8Holes.
Ref. 2014-6070 70 mm x 198 mm 8Holes P80 100 Un.
Ref. 2014-6071 70 mm x 198 mm 8Holes P120 100 Un.
Ref. 2014-6072 70 mm x 198 mm 8Holes P150 100 Un.
Ref. 2014-6073 70 mm x 198 mm 8Holes P180 100 Un.
Ref. 2014-6074 70 mm x 198 mm 8Holes P220 100 Un.
ABRASIVE SHEET F1 GOLD LINE
Flexible abrasive belt: high quality output. Velcro system. Artificial corundum abrasive. Bonder: polymerised Phenolic resin. Bonder additive: calcium carbonate. Backing: paper.8Holes.
Ref. 2014-6065 70 mm x 125 mm 8Holes P80 100 Un.
Ref. 2014-6066 70 mm x 125 mm 8Holes P120 100 Un.
Ref. 2014-6067 70 mm x 125 mm 8Holes P150 100 Un.
Ref. 2014-6068 70 mm x 125 mm 8Holes P180 100 Un.
Ref. 2014-6069 70 mm x 125 mm 8Holes P220 100 Un.
ABRASIVE SHEET F1 GOLD LINE
Flexible abrasive belt: high quality output. Velcro system. Artificial corundum abrasive. Bonder: polymerised Phenolic resin. Bonder additive: calcium carbonate. Backing: paper. 8Holes.
Ref. 2014-6075 81 mm x 153 mm 8Holes P80 100 Un.
Ref. 2014-6076 81 mm x 153 mm 8Holes P120 100 Un.
Ref. 2014-6077 81 mm x 153 mm 8Holes P150 100 Un.
Ref. 2014-6078 81 mm x 153 mm 8Holes P180 100 Un.
Ref. 2014-6079 81 mm x 153 mm 8Holes P220 100 Un.
ABRASIVE SHEET F1 GOLD LINE
Flexible abrasive belt: high quality output. Velcro system. Artificial corundum abrasive. Bonder: polymerised Phenolic resin. Bonder additive: calcium carbonate. Backing: paper.10Holes.
Ref. 2014-6080 115 mm x 230 mm 10Holes P80 100 Un.
Ref. 2014-6081 115 mm x 230 mm 10Holes P120 100 Un.
Ref. 2014-6082 115 mm x 230 mm 10Holes P150 100 Un.
Ref. 2014-6083 115 mm x 230 mm 10Holes P180 100 Un.
Ref. 2014-6084 115 mm x 230 mm 10Holes P220 100 Un.
ABRASIVE SHEET F1 GOLD LINE
Abrasives
83
12
Case containing one flat block, two concave blocks and three convex blocks that adapt to each other, making it easy to reach any area.
Ref. 2004-1610 1Kit Kitof6Un.
SANDING BLOCKS KIT
Minisandingblockof35-mmdiameterforadhesivediscsorVelcrodiscs.
Ref. 2007-2190 35 mm 1 Pack Pack of 5 Un.
MINI SANDING BLOCK
Nylonsandingblock.Dimensions:210mmx105mm.
Ref. 2004-2360 1 Un.
NYLON SANDING BLOCK
Rubber sanding block for wet-sanding.
Ref. 2004-2040 Brown 5 Un.
Ref. 2004-2450 Black 5 Un.
RUBBER SANDING BLOCK
SandingblockwithVelcrofixingsystemfordiscsof150-mmdiameter.Available:planeandconcave.
Ref. 2004-1790 Plane 6 Un.
Ref. 2004-2350 Concave 6 Un.
SANDING BLOCKS
Abrasives
84
Manual gun with tank designed for paint abrasion, serigraphs and elimination of superficial pollutants on metal. Specially indicated for precision work on very low or heat sensitive metals during the scraping due to the under pressure sandblasting process. Guncontentcapacity:1,2liters.Consumable:sodiumbicarbonate,availablein5litersbags.
Ref. 1001-7102 Gun 1,2 l 1 Un.
Ref. 1002-7100 Consumable sodium bicarbonate 5 l 1 Un.
SODA BLASTING GUN
Stripping gel to remove paints, primers, putties and powder coatings.
Ref. 5015-0001 Tin 1 kg 1 Box 12 Un.
Ref. 5015-0002 Cylinder 5 kg 1 Box 4 Un.
STRIPPING GEL
Fibre disc designed for getting rid of oxide residue, rust, paint, synthetic material, etc.Diameter:150mm.
Ref. 2013-1140 150 mm 15 Un.
CARBON FIBRE DISC
Fibre disc specifically used for removing residue and waste as well as oxide and paint.Diameter:115mm.
Ref. 2007-2090 115 mm Grit16 25 Un.
Ref. 2007-2100 115 mm Grit24 25 Un.
Ref. 2007-2110 115 mm Grit36 25 Un.
Ref. 2007-2120 115 mm Grit60 25 Un.
FIBRE DISC
Fibre disc specifically used for removing residue and waste as well as oxide and paint.Diameter:178mm.
Ref. 2007-2130 178 mm Grit16 25 Un.
Ref. 2007-2140 178 mm Grit24 25 Un.
Ref. 2007-2150 178 mm Grit36 25 Un.
Ref. 2007-2160 178 mm Grit60 25 Un.
FIBRE DISC
Abrasives
85
12
Lubricatingspraytobeusedwithwater-based,manualorpowerabrasivesaswellaswith spray removal abrasive rubbers. When used with finish sandpapers like SKYLON, it reduces temperature during sanding, therefore, increasing output and improving finish.
Ref. 2007-1150 Cylinder 5 l 6 Un.
Ref. 2007-2520 Sprayer 1 l 16 Un.
EASY SANDING · Lubricant
Sanding control manual applicator. Presents two interchangeable containers. To be placed directly on the bodywork, then sprayed and finally spread over surface to sand.
Ref. 2004-0010 1 Un.
DRY COAT CONTROL · Sanding Control
Sanding control spray. Fast drying. Fat and silicone-free.
Ref. 5011-6022 Spray 500 ml 12 Un.
QUICK SANDING CONTROL · Sanding Control Spray
Fast-drying, sanding control powder. Does not need masking since it does not stain.
Ref. 5011-6034 Spray 400 ml 12 Un.
QUICK BLACK SPY · Sanding Control Powder
Abrasive rubber for removing paint spray, metal, dust, etc., from painted surfaces without damage.Blue: fine grain.Pink: medium grain.
Ref. 2007-55330 Blue 3 Un.
Ref. 2007-55340 Pink 3 Un.
ABRASIVE RUBBER
Abrasives
86
Pneumatic tool for adhesive-remover rubber discs.
Ref. 1007-7530 1 Un.
STRIPPING TOOL CRS
Rubber disc for removing adhesives and moulding residues without scratching nor damaging paint work.
Ref. 2013-1111 6 Un.
ADHESIVE REMOVAL RUBBER DISC - STANDARD
Rubber disc for removing adhesives and moulding residues without scratching nor damaging paint work. The fan system makes work easier and cleaner.
Ref. 2013-1112 6 Un.
ADHESIVE REMOVAL RUBBER DISC - VENTILATED
Handyadapterforplacingdecaloradhesiveremovaldiscs.
Ref. 2013-1113 1 Un.
ADAPTER FOR REMOVAL DISCS
Abrasives
12
Bodyshop Equipment
Bodyshop Equipment
89
13Cordless rechargeable lamp for a perfect colours perception. This lamp is equipped with a lithium battery and a charge indicator. Enables a perfect colours perception thanks to two natural light intensities. The LED characteristics makes the lamp perfect forpreparing, painting, polishing and cleaning tasks. Adaptable hook and magnetic base for comfortable work and easy movements.Twoavailablepowers.Batterylife:upto3hours.Automaticshutdownsensorafterthreeminutes at maximum power.
Ref. 1008-1800 Lampe 1 Un.
OPTIMUM LIGHT
Thermometer equipped with an infrared sensor and an ultrasound transmitter to measure exactlyanysurfacetemperature.Fastandaccurate.DisplayonLCDscreen,inCelsiusorFahrenheitdegrees.Temperaturemeasurement:-50ºCto380ºC/-58ºFto716ºF.Especially indicated when direct contact with the surface is not recommended or considered as dangerous.
Ref. 1014-5000 1 Un.
INFRARED THERMOMETER CRS
Drying gun with abundant air flow and acute blowing precision. Includes a plastic tip to protect bodywork while blowing.
Ref. 1008-7109 1 Un.
CRS-BG1 AIR GUN
Complete blow gun.
Ref. 1008-7518 1 Un.
DUSTER CRS-2012 AIR GUN
Highvolumeblowgun.
Ref. 1008-7550 1 Un.
HIGH VOLUME AIR GUN
Bodyshop Equipment
90
Pair of two clamps with a powerful magnetic base. Allows to maintain small and difficult to pain pieces by placing the clamps on the car or the paint cabin walls.
Ref. 1008-1810 2 Un.
MAGNETIC CLAMPS
Mobile trolley for storing dismantled pieces during repair in bodyshop.
Ref. 2004-1813 1 Un.
STAND FOR DISMANTLED PARTS
Application stand with a wide rotating angle. Easy and quick to move.
Ref. 2004-1187 1 Un.
EASY QUICK ROTATING STAND
Stand for horizontal and vertical holding of door panels and other items. Equipped with arotatingsystem(upto360º)controlledbyapedal.Includesanextensionthatallowsworkingwith2itemsatatime.Dimensions,includingextension:2100mmx810mmx1050mm.
Ref. 2004-2050 1 Un.
HOLDING STAND
Stand for horizontal and vertical holding of all types of items. Made of galvanised steel. Dimensions:1060mmx1300mmx60mm.Adjustableheight:46,69,88,104and117cm.
Ref. 2004-1810 1 Un.
JUMBO STAND
Stand for pieces and mirrors. Stable and handy. Includes three clamps for holding small piecesand1mirrorholder.
Ref. 2004-1811 Stand 1 Un.
Ref. 1008-1811 Clamp 1 Un.
Ref. 1008-1812 Mirror holder 1 Un.
STAND FOR SMALL PARTS
Bodyshop Equipment
91
13Stand designed to fix the bumpers in a stable and security way. The bumpers are quickly secured onto the stand with the use of its extensible arms and its fixing clamps. Stand enablespanelstoberotated180degreestogainaccesstothemostdifficultareas.
Ref. 2004-1802 1 Un.
MULTIFLEX STAND FOR BUMPERS
Very compact and resistant stand for panels, doors, aisles, hoods, boot’s doors… Adaptable to any panel thanks to its flexible attachments. Thanks to rotation control and according to fitting, the panel can be positioned in the desired angle to gain access to interior and exterior parts and to the edges. Available compatible accessories to fix hard parts.
Ref. 2004-1801 1 Un.
EASYFLEX STAND FOR PANELS
Kitcomposedby4stainlessstealrodswith4,5,6&8mmmaleandfemalethreads.Easyto screw up the spoiler thanks to its quick attachment.
Ref. 2004-1803 1 Un.
FLEX SPOLIERS KIT
Adjustable grip to hold the door handles, grilles, covers, mouldings, etc. Easy to fit to two stands (Multiflex and Easyflex) thanks to a quick attachment.
Ref. 2004-1805 1 Un.
FLEX STABLE GRIP
Holdsallsmallparts(covers,moulding…)inneedofpainting.
Ref. 2004-1806 1 Un.
FLEX GRIP WITH BRACKETS
Clamps for holding on to any and all items that can only be held on to from within (squeezeout).
Ref. 2004-1807 1 Un.
FLEX PRESS OUT CLAMPS
MULTIFLEX AND EASYFLEX ACCESSORIES
Bodyshop Equipment
92
Time indicator
4Memories
Emitter selection
Flash time programming
Continued time programming
Distance sensor
On/Off
Power
This short-wave infrared system (CRS-3C)issuitablefordryingtwo-componentproductsused in bodywork repair. Its main characteristics are deep reach, reduced drying time, lowpowerconsumption,maximumadaptabilityanduseefficiency.Highlyflexibleandeasy to move.
Equipped with distance sensor.
The CRS-3C lamp is equipped with a timer that determines both drying level and time. Theequipmentdistanceandheightcanbeeasilyadjusted.Heights:40and200cm.Comeswith4digitalmemoriesthatstoredryingtimeforeachproduct.
Ref. 1011-7768 1 Un.
Input power 13.7 A
Voltage 220-240V/50HZ
Short-wave infrared quartz halogen emitter 3 × 1050 W
Maximum power 3200 W
Time ranges 2 × 35 min
Drying surface 1.0 × 0.8 m
Drying temperature 60°C - 70°C
INFRARED CRS-3C WITH DISTANCE SENSOR
Bodyshop Equipment
93
13
Flash time programming
Continued time programming
Power
Input power 4.6 A
Voltage 220-240V/50HZ
Short-wave infrared quartz halogen emitter 1 × 1050 W
Maximum power 1100 W
Time ranges 2 × 35 min
Drying surface 0,6 × 0.4 m
Drying temperature 60ºC-70ºC
This infrared system (CRS-1C) is suitable fordrying two-componentproductsused inbodywork repair. Its main characteristics are deep reach, reduced drying time, low powerconsumption,maximumadaptabilityanduseefficiency.Highlyflexibleandeasyto move.
The CRS-1C lamp is equipped with a timer that determines both drying level and time. Theequipmentdistanceandheightcanbeeasilyadjusted.Heightiscomprisedbetween20cmand160cm.
Ref. 1011-7769 1 Un.
INFRARED CRS-1C
Bodyshop Equipment
94
Transparent water-based emulsion for protection of painting cabins. Creates an adhesive layer on which dust and paint spray can stick. Biodegradable.
Ref. 5012-1070 Cylinder 5 l 4 Un.
QUICK GEL CABIN · ProtectiveGel
Transparent water-based emulsion for protection of painting cabins. Creates a peel-off adhesive layer (peel-offclear coat) toprotectwindowsandwalls fromsprays. Easilyremoved by pulling, blowing or wetting.
Ref. 5012-0024 Cylinder 5 l 4 Un.
QUICK PRO-PEEL CABIN · Protective Film
Special liquid product designed for reducing dust particles in the cabin atmosphere. Easy to apply by spraying the floor with a normal gun. Ionises all dust particles for a periodof1to2weeks.
Ref. 5012-1119 Cylinder 5 l 4 Un.
QUICK DUST CABIN · Dust Ioniser
14Index / Alphabetical Index by Description
Index / Alphabetical Index by Description
96
2007-55330 P-85 ABRASIVE RUBBER BLUE
2007-55340 P-85 ABRASIVE RUBBER PINK
2014-6065 P-82ABRASIVE SHEET F1 GOLD LINE 70 MM x 125 MM 8 HOLES P80
2014-6066 P-82ABRASIVE SHEET F1 GOLD LINE 70 MM x 125 MM 8 HOLES P120
2014-6067 P-82ABRASIVE SHEET F1 GOLD LINE 70 MM x 125 MM 8 HOLES P150
2014-6068 P-82ABRASIVE SHEET F1 GOLD LINE 70 MM x 125 MM 8 HOLES P180
2014-6069 P-82ABRASIVE SHEET F1 GOLD LINE 70 MM x 125 MM 8 HOLES P220
2014-6070 P-82ABRASIVE SHEET F1 GOLD LINE 70 MM x 198 MM 8 HOLES P80
2014-6071 P-82ABRASIVE SHEET F1 GOLD LINE 70 MM x 198 MM 8 HOLES P120
2014-6072 P-82ABRASIVE SHEET F1 GOLD LINE 70 MM x 198 MM 8 HOLES P150
2014-6073 P-82ABRASIVE SHEET F1 GOLD LINE 70 MM x 198 MM 8 HOLES P180
2014-6074 P-82ABRASIVE SHEET F1 GOLD LINE 70 MM x 198 MM 8 HOLES P220
2014-6060 P-82ABRASIVE SHEET F1 GOLD LINE 70 MM x 420 MM 14 HOLES P80
2014-6061 P-82ABRASIVE SHEET F1 GOLD LINE 70 MM x 420 MM 14 HOLES P120
2014-6062 P-82ABRASIVE SHEET F1 GOLD LINE 70 MM x 420 MM 14 HOLES P150
2014-6063 P-82ABRASIVE SHEET F1 GOLD LINE 70 MM x 420 MM 14 HOLES P180
2014-6064 P-82ABRASIVE SHEET F1 GOLD LINE 70 MM x 420 MM 14 HOLES P220
2014-6075 P-82ABRASIVE SHEET F1 GOLD LINE 81 MM x 153 MM 8 HOLES P80
2014-6076 P-82ABRASIVE SHEET F1 GOLD LINE 81 MM x 153 MM 8 HOLES P120
2014-6077 P-82ABRASIVE SHEET F1 GOLD LINE 81 MM x 153 MM 8 HOLES P150
2014-6078 P-82ABRASIVE SHEET F1 GOLD LINE 81 MM x 153 MM 8 HOLES P180
2014-6079 P-82ABRASIVE SHEET F1 GOLD LINE 81 MM x 153 MM 8 HOLES P220
2014-6080 P-82ABRASIVE SHEET F1 GOLD LINE 115 MM x 230 MM 10 HOLES P80
2014-6081 P-82ABRASIVE SHEET F1 GOLD LINE 115 MM x 230 MM 10 HOLES P120
2014-6082 P-82ABRASIVE SHEET F1 GOLD LINE 115 MM x 230 MM 10 HOLES P150
2014-6083 P-82ABRASIVE SHEET F1 GOLD LINE 115 MM x 230 MM 10 HOLES P180
2014-6084 P-82ABRASIVE SHEET F1 GOLD LINE 115 MM x 230 MM 10 HOLES P220
2007-1200 P-77 ABRASIVE SPONGE 115 MM x 140 MM FINE GRIT
2007-1220 P-77 ABRASIVE SPONGE 115 MM x 140 MM MICROFINE GRIT
2007-1210 P-77 ABRASIVE SPONGE 115 MM x 140 MM SUPERFINE GRIT
2007-1240 P-77 ABRASIVE SPONGE 115 MM x 140 MM ULTRAFINE GRIT
5009-1155 P-38 ACELERATOR FOR ACRYLICS
2013-1113 P-86 ADAPTER FOR REMOVAL DISCS
5006-1098 P-23 ADHESIVE FIBRE
2013-1111 P-86 ADHESIVE REMOVAL RUBBER DISC-STANDARD
2013-1112 P-86 ADHESIVE REMOVAL RUBBER DISC-VENTILATED
1002-7102 P-40 AIR REGULATOR CRS
2002-1990 P-62 ALU TAPE
5011-1005 P-30 ALUMINIUM PAINT DARK B06
5011-1001 P-30 ALUMINIUM PAINT FINE B02
5011-1002 P-30 ALUMINIUM PAINT MEDIUM B03
5011-1003 P-30 ALUMINIUM PAINT SPARKLING B04
5011-1004 P-30 ALUMINIUM PAINT SUPER SPARKLING B05
5011-1000 P-30 ALUMINIUM PAINT ULTRA FINE B01
5014-1000 P-30 ALUMINIUM WHEEL KIT
2001-2460 P-60 AUTOADHESIVE MASKING FOAM TAPE 13 MM X 50 M
2001-2470 P-60 AUTOADHESIVE MASKING FOAM TAPE 18 MM X 50 M
4003-5821 P-69 BLUE COMFORT EARMUFFS
5003-1001 P-14 BUTYL CORD
5003-1002 P-14 BUTYL FILLER
2013-1140 P-84 CARBON FIBRE DISC 150 MM
2004-7001 P-51 CARS BUFFING PAD
2010-1711 P-71 CARS LATEX GLOVES SIZE M
2010-1710 P-71 CARS LATEX GLOVES SIZE L
2010-1712 P-71 CARS LATEX GLOVES SIZE XL
2004-0104 P-51 CARS MEDIUM POLISHING PAD BEIGE
2010-2660 P-71 CARS NITRILE GLOVES SIZE M
2010-2220 P-71 CARS NITRILE GLOVES SIZE L
2010-2670 P-71 CARS NITRILE GLOVES SIZE XL
2004-7002 P-51 CARS POLISHER PLATE
2004-7000 P-51 CARS POLISHING PAD WHITE
2004-2770 P-52 CELLULOSE SPONGE
5004-6040 P-30 CHROME EFFECT
1008-1811 P-90 CLAMP FOR STAND FOR SMALL PARTS
2003-2400 P-12 CLEANNING CLOTH
5009-1304 P-50 CLEAR CAR MATT
1002-7100 P-84 CONSUMABLE SODIUM BICARBONATE
8010-0001 P-52 CRS DECONTAMINATION MITT
1008-7109 P-89 CRS-BG1 AIR GUN
1001-7105 P-39 CRS-PRO CLEAR 2011 GUN 1,3 MM
1001-7100 P-39 CRS-W400 FILLER AND PUTTY GUN
5010-0003 P-49 CRYSTAL 4000
14
97
5004-0103 P-49 CRYSTAL 4000 FOAM PAD
1002-7119 P-39 CUP PVC CRS-PRO 2011
1002-7108 P-39 CUP PVC CRS-W400
1002-7107 P-39 CUP PVC LVLP CRS-007X
2004-4010 P-59 CUTTING PLASTIC "POLYCUT" BLADE
5009-1033 P-38 DEGREASER CARS 0467 FAST 1 L
5009-1025 P-38 DEGREASER CARS 0467 FAST 5 L
5009-1144 P-38 DEGREASER CARS 9410 SLOW 1 L
5009-1145 P-38 DEGREASER CARS 9410 SLOW 5 L
5010-0001 P-49 DIAMOND 1500
2004-0101 P-49 DIAMOND 1500 WOOL PAD
2004-0001 P-41 DISPENSER FOR PAPER ROLLS AND POLYTEX
2012-1333 P-44 DISPOSABLE MIXING STIRRERS CRS
2001-1470 P-63 DOOR SKIN PLASTIC SHEET
2001-1480 P-64 DOOR SKIN REPLACEMENT FILM
2001-1490 P-64 DOOR SKIN REPLACEMENT FOAM
2004-4030 P-14 DOUBLE NYLON BRUSH
2002-5006 P-63 DOUBLE-SIDE ACRYLIC TAPE 9 MM x 10 M
2002-5007 P-63 DOUBLE-SIDE ACRYLIC TAPE 12 MM x 10 M
2002-5008 P-63 DOUBLE-SIDE ACRYLIC TAPE 19 MM x 10 M
2007-1248 P-77DOUBLE-SIDED ABRASIVE SPONGE 100 M X 120 MM BLUE MEDIUM GRIT
2007-1249 P-77DOUBLE-SIDED ABRASIVE SPONGE 100 M X 120 MM BROWM FINE GRIT
2007-1250 P-77DOUBLE-SIDED ABRASIVE SPONGE 100 M X 120 MM GREEN SUPERFINE GRIT
2007-1251 P-77DOUBLE-SIDED ABRASIVE SPONGE 100 M X 120 MM VIOLET SUPERFINE GRIT
2002-1780 P-63 DOUBLE-SIDED TAPE 6 MM x 10 M
2002-0910 P-63 DOUBLE-SIDED TAPE 9 MM x 10 M
2002-1210 P-63 DOUBLE-SIDED TAPE 12 MM x 10 M
2002-1910 P-63 DOUBLE-SIDED TAPE 19 MM x 10 M
2002-2510 P-63 DOUBLE-SIDED TAPE 25 MM x 10 M
2004-0010 P-85 DRY COAT CONTROL
2004-1770 P-40 DUST REMOVAL NEEDLES KIT 10 NEEDLES + PEN
2004-1240 P-40 DUST REMOVAL NEEDLES SET 6 NEEDLES
1008-7518 P-89 DUSTER CRS-2012 AIR GUN
5009-1221 P-33 EASY FILLER 4000 DARK GREY
5009-1220 P-33 EASY FILLER 4000 LIGHT GREY
5009-1223 P-33 EASY FILLER HARDENER EXTRA FAST
5009-1222 P-33 EASY FILLER HARDENER STANDARD
2004-1187 P-90 EASY QUICK ROTATING STAND
2007-2520 P-85 EASY SANDING 1 L
2007-1150 P-85 EASY SANDING 5 L
2004-1801 P-91 EASYFLEX STAND FOR PANELS
5010-0004 P-49 ECLIPSE
1014-5020 P-51 ELECTRIC POLISHER CRS DS13-1 1200W
2002-1000 P-61 EU ORANGE MASKING TAPE 19 MM x 50 M
2002-0012 P-61 EU ORANGE MASKING TAPE 50 MM x 50 M
2014-6085 P-75 F1 BLUE LINE DISC 75 MM P80
2014-6086 P-75 F1 BLUE LINE DISC 75 MM P120
2014-6087 P-75 F1 BLUE LINE DISC 75 MM P150
2014-6088 P-75 F1 BLUE LINE DISC 75 MM P180
2014-6089 P-75 F1 BLUE LINE DISC 75 MM P240
2014-6090 P-75 F1 BLUE LINE DISC 75 MM P320
2014-6091 P-75 F1 BLUE LINE DISC 75 MM P360
2014-6092 P-75 F1 BLUE LINE DISC 75 MM P400
2014-6093 P-75 F1 BLUE LINE DISC 75 MM P600
2014-6109 P-75 F1 BLUE LINE DISC 75 MM P800
2014-6110 P-75 F1 BLUE LINE DISC 75 MM P1200
2014-6111 P-75 F1 BLUE LINE DISC 75 MM P1500
2014-6112 P-75 F1 BLUE LINE DISC 75 MM P2000
2014-6113 P-75 F1 BLUE LINE DISC 75 MM P2500
2014-6152 P-75 F1 BLUE LINE DISC 75 MM P3000
2014-6114 P-75 F1 BLUE LINE DISC 150 MM P80
2014-6115 P-75 F1 BLUE LINE DISC 150 MM P100
2014-6116 P-75 F1 BLUE LINE DISC 150 MM P120
2014-6117 P-75 F1 BLUE LINE DISC 150 MM P150
2014-6118 P-75 F1 BLUE LINE DISC 150 MM P180
2014-6119 P-75 F1 BLUE LINE DISC 150 MM P220
2014-6120 P-75 F1 BLUE LINE DISC 150 MM P240
2014-6122 P-75 F1 BLUE LINE DISC 150 MM P320
2014-6133 P-75 F1 BLUE LINE DISC 150 MM P360
2014-6123 P-75 F1 BLUE LINE DISC 150 MM P400
2014-6124 P-75 F1 BLUE LINE DISC 150 MM P500
2014-6125 P-75 F1 BLUE LINE DISC 150 MM P600
Index / Alphabetical Index by Description
98
2014-6126 P-75 F1 BLUE LINE DISC 150 MM P800
2014-6127 P-75 F1 BLUE LINE DISC 150 MM P1200
2014-6153 P-75 F1 BLUE LINE DISC 150 MM P1500
2014-6128 P-75 F1 BLUE LINE DISC 150 MM P2000
2014-6129 P-75 F1 BLUE LINE DISC 150 MM P2500
2014-6130 P-75 F1 BLUE LINE DISC 150 MM P3000
2014-6150 P-75 F1 BLUE LINE MINI DISC 35 MM P1500
2014-6131 P-75 F1 BLUE LINE MINI DISC 35 MM P2000
2014-6132 P-75 F1 BLUE LINE MINI DISC 35 MM P2500
2014-6151 P-75 F1 BLUE LINE MINI DISC 35 MM P3000
2014-6136 P-76 F1 GOLD LINE + DISC 150 MM 15 HOLES P80
2014-6137 P-76 F1 GOLD LINE + DISC 150 MM 15 HOLES P100
2014-6138 P-76 F1 GOLD LINE + DISC 150 MM 15 HOLES P120
2014-6139 P-76 F1 GOLD LINE + DISC 150 MM 15 HOLES P150
2014-6140 P-76 F1 GOLD LINE + DISC 150 MM 15 HOLES P180
2014-6141 P-76 F1 GOLD LINE + DISC 150 MM 15 HOLES P220
2014-6142 P-76 F1 GOLD LINE + DISC 150 MM 15 HOLES P240
2014-6144 P-76 F1 GOLD LINE + DISC 150 MM 15 HOLES P320
2014-6145 P-76 F1 GOLD LINE + DISC 150 MM 15 HOLES P360
2014-6146 P-76 F1 GOLD LINE + DISC 150 MM 15 HOLES P400
2014-6147 P-76 F1 GOLD LINE + DISC 150 MM 15 HOLES P500
2014-6148 P-76 F1 GOLD LINE + DISC 150 MM 15 HOLES P600
2014-6149 P-76 F1 GOLD LINE + DISC 150 MM 15 HOLES P800
2014-6159 P-76 F1 GOLD LINE DRY SANDPAPER 115 MM x 25 M P40
2014-6154 P-76 F1 GOLD LINE DRY SANDPAPER 115 MM x 25 M P60
2014-6155 P-76 F1 GOLD LINE DRY SANDPAPER 115 MM x 25 M P80
2014-6156 P-76 F1 GOLD LINE DRY SANDPAPER 115 MM x 25 M P120
2014-6158 P-76 F1 GOLD LINE DRY SANDPAPER 115 MM x 25 M P240
2007-7085 P-76 F1 GOLD LINE FOAM SANDPAPER 115 MM x 25 M P240
2007-1290 P-76 F1 GOLD LINE FOAM SANDPAPER 115 MM x 25 M P320
2007-1300 P-76 F1 GOLD LINE FOAM SANDPAPER 115 MM x 25 M P400
2007-1310 P-76 F1 GOLD LINE FOAM SANDPAPER 115 MM x 25 M P500
2007-6014 P-76 F1 GOLD LINE FOAM SANDPAPER 115 MM x 25 M P600
2007-1320 P-76 F1 GOLD LINE FOAM SANDPAPER 115 MM x 25 M P800
2014-6094 P-78 F1 LINE WET PAPER SHEET 230 x 280 MM P220
2014-6095 P-78 F1 LINE WET PAPER SHEET 230 x 280 MM P240
2014-6096 P-78 F1 LINE WET PAPER SHEET 230 x 280 MM P280
2014-6097 P-78 F1 LINE WET PAPER SHEET 230 x 280 MM P320
2014-6098 P-78 F1 LINE WET PAPER SHEET 230 x 280 MM P360
2014-6099 P-78 F1 LINE WET PAPER SHEET 230 x 280 MM P400
2014-6100 P-78 F1 LINE WET PAPER SHEET 230 x 280 MM P500
2014-6101 P-78 F1 LINE WET PAPER SHEET 230 x 280 MM P600
2014-6102 P-78 F1 LINE WET PAPER SHEET 230 x 280 MM P800
2014-6103 P-78 F1 LINE WET PAPER SHEET 230 x 280 MM P1200
2014-6104 P-78 F1 LINE WET PAPER SHEET 230 x 280 MM P1500
2014-6105 P-78 F1 LINE WET PAPER SHEET 230 x 280 MM P2000
2014-6033 P-77 F1 SKYLON DISC 75 MM P2000
2014-6034 P-77 F1 SKYLON DISC 75 MM P3000
2014-6029 P-77 F1 SKYLON DISC 150 MM P500
2014-6030 P-77 F1 SKYLON DISC 150 MM P1000
2014-6031 P-77 F1 SKYLON DISC 150 MM P2000
2014-6032 P-77 F1 SKYLON DISC 150 MM P3000
2014-6035 P-77 F1 SKYLON DISC 150 MM P4000
2014-700080 P-77 F1 STAR LINE DISC 150 MM P80
2014-700100 P-77 F1 STAR LINE DISC 150 MM P100
2014-700120 P-77 F1 STAR LINE DISC 150 MM P120
2014-700180 P-77 F1 STAR LINE DISC 150 MM P180
2014-700220 P-77 F1 STAR LINE DISC 150 MM P220
2014-700280 P-77 F1 STAR LINE DISC 150 MM P280
2014-700320 P-77 F1 STAR LINE DISC 150 MM P320
2007-2090 P-84 FIBRE DISC 115 MM GRIT 16
2007-2100 P-84 FIBRE DISC 115 MM GRIT 24
2007-2110 P-84 FIBRE DISC 115 MM GRIT 36
2007-2120 P-84 FIBRE DISC 115 MM GRIT 60
2007-2130 P-84 FIBRE DISC 178 MM GRIT 16
2007-2140 P-84 FIBRE DISC 178 MM GRIT 24
2007-2150 P-84 FIBRE DISC 178 MM GRIT 36
2007-2160 P-84 FIBRE DISC 178 MM GRIT 60
5001-1454 P-09 FILL BLACK CARBON
5001-1087 P-06 FILL EASY SAND
5001-1089 P-07 FILL FIBER TECH
5006-1081 P-22 FILL FLEX
14
99
5001-1031 P-06 FILL GLASS
5001-1082 P-05 FILL LIGHT PLUS
5001-1125 P-06 FILL METAL
5001-1000 P-30 FILL METAL + HARDENER
5001-6106 P-05 FILL MULTILIGHT PLUS
5001-1086 P-06 FILL MULTISOFT BEIGE 1,8 KG
5001-1092 P-06 FILL MULTISOFT BEIGE 3 KG
5006-1126 P-22 FILL PLAS
5001-0032 P-07 FILL POLISPRAY
5001-1079 P-05 FILL SOFT DISPENSER
5001-1081 P-05 FILL SOFT WHITE CARTRIDGE
5001-1083 P-05 FILL SOFT WHITE TIN
5001-1456 P-09 FILL TRANSPARENT CARBON
5001-1090 P-05 FILL UNIVERSAL LIGHT BEIGE
5009-1150 P-33 FILLER AND SURFACER HS 540 BLACK
5009-1161 P-33 FILLER AND SURFACER HS 540 BLACK + HARDENER
5009-1147 P-33 FILLER AND SURFACER HS 540 GREY
5009-1160 P-33 FILLER AND SURFACER HS 540 GREY + HARDENER
5009-1146 P-33 FILLER AND SURFACER HS 540 WHITE
5009-1163 P-33 FILLER AND SURFACER HS 540 WHITE + HARDENER
5009-1458 P-09 FILLER CARBON FIBER
2004-1806 P-91 FLEX GRIP WITH BRACKETS
2004-1807 P-91 FLEX PRESS OUT CLAMPS
2004-1803 P-91 FLEX SPOLIERS KIT
2004-1805 P-91 FLEX STABLE GRIP
2107-1017 P-75 FOAM F1 LINE DISC 150 MM FINE GRIT
2107-1019 P-75 FOAM F1 LINE DISC 150 MM MICROFINE GRIT
2107-1018 P-75 FOAM F1 LINE DISC 150 MM SUPERFINE GRIT
4002-2783 P-69 FOGBAN BLUE GLASSES
4001-1592 P-68 FREEDOM MASK A1P1
4001-1591 P-68 FREEDOM MASK A2P3
8010-0007 P-56 GLASS CLEANER EXTRA STRONG
2006-1050 P-46 GRAVITY FILTER
5006-1101 P-37 HEADLIGHTS KIT
3001-5003 P-37 HEADLIGHTS REPAIR KIT
1008-7550 P-89 HIGH VOLUME AIR GUN
2003-1050 P-41 HITEX 4000
2004-2050 P-90 HOLDING STAND
2009-2330 P-69 HOOD FOR PAINTER PLASTIC PP
2009-2340 P-69 HOOD FOR PAINTER TYVEK® WHITE
5009-1154 P-33 HS FILLER HARDENER 541 EXTRA FAST
5009-1159 P-33 HS FILLER HARDENER 541 STANDARD
2004-2670 P-53 HYDRA FLEXI BLADE
1011-7769 P-93 INFRARED CRS-1C
1011-7768 P-92 INFRARED CRS-3C WITH DISTANCE SENSOR
1014-5000 P-89 INFRARED THERMOMETER CRS
8010-0010 P-56 INSECT REMOVER EXTRA STRONG
5009-1190 P-38 IONISEUR WB 1 L
5009-1189 P-38 IONISEUR WB 5 L
2004-2760 P-52 JUMBO SPONGE
2004-1810 P-90 JUMBO STAND
5002-1060 P-11 KIT DG QUICK SEAL PLUS QUICK
5002-1061 P-11 KIT DG QUICK SEAL STANDARD
5001-1128 P-07 KIT FIBER REPAIR
2001-1860 P-61 KRAFT MASKING PAPER 40 G 45 CM x 400 M
2001-1870 P-61 KRAFT MASKING PAPER 40 G 60 CM x 400 M
2001-1880 P-61 KRAFT MASKING PAPER 40 G 90 CM x 400 M
2001-1890 P-61 KRAFT MASKING PAPER 40 G 120 CM x 400 M
4004-4401 P-72 LATEX GLOVES PERFECT FIT
8010-0002 P-55 LEATHER CARE
8010-0003 P-55 LEATHER CLEANER
2002-11921 P-62 LIFTING TAPE 3 MM x 66 M
2002-11922 P-62 LIFTING TAPE 6 MM x 66 M
2002-11923 P-62 LIFTING TAPE 9 MM x 66 M
2002-11924 P-62 LIFTING TAPE 12 MM x 66 M
2002-11925 P-62 LIFTING TAPE 19 MM x 66 M
2002-11970 P-62 LIFTING TAPE 25 MM x 55 M
2002-1980 P-14 LOGO TAPE
1001-7101 P-39 LVLP CRS-007X BASE PAINT GUN 1,3 MM
1008-1810 P-90 MAGNETIC CLAMPS
2004-3000 P-40 MAGNETIC GUN BRACKET
2004-1184 P-59 MAGNETIC STAND FOR FILM
Index / Alphabetical Index by Description
100
1010-7522 P-12 MANUAL GUN CRS 2050
4001-5595 P-68 MASK 5251
2015-1003 P-67 MASK CLASSIC CRS (5110) FFP2
2015-1004 P-67 MASK FOLDED CRS (4211) FFP2
2015-1001 P-67 MASK SUPERONE 3203 (5185) FFP1
2015-1000 P-67 MASK SUPERONE 3206 (5211) FFP2
2015-1002 P-67 MASKCLASSIC CRS (5209) FFP2
2001-1582 P-59 MASKING FILM 400 CM x 150 M
2001-1583 P-59 MASKING FILM 400 CM x 150 M HT (200ºC)
2001-1581 P-59 MASKING FILM 400 CM x 300 M
2004-1186 P-59 MASKING FILM DISPENSER
2002-1730 P-61 MASKING TAPE 18 MM x 45 M
2002-1740 P-61 MASKING TAPE 24 MM x 45 M
2002-1750 P-61 MASKING TAPE 36 MM x 45 M
2002-1760 P-61 MASKING TAPE 48 MM x 45 M
5009-1305 P-50 MATT PROTECT KIT
8010-0006 P-56 METAL POLISH LIQUID
2006-2290 P-46 METALIC SUCTION FILTER
1008-2000 P-45 MICROBRUSH REGULAR BLUE
2003-7029 P-52 MICROFIBRE CLOTH
2004-7025 P-45 MINI BOTTLE FOR PAINT SAMPLE
2007-2190 P-83 MINI SANDING BLOCK
1001-7103 P-39 MINI TOUCH UP GUN CRS-ST 3000
1001-7104 P-39 MINI TOUCH UP GUN LM3000
1008-1812 P-90 MIRROR HOLDER FOR STAND FOR SMALL PARTS
2012-1420 P-43 MIXING CUP 385 ML
2012-1440 P-43 MIXING CUP 750 ML
2012-1500 P-43 MIXING CUP 1400 ML
2012-1520 P-43 MIXING CUP 2300 ML
2012-1430 P-43 MIXING LID 385 ML
2012-1450 P-43 MIXING LID 750 ML
2012-1510 P-43 MIXING LID 1400 ML
2012-1530 P-43 MIXING LID 2300 ML
2012-1334 P-44 MIXING RULER CRS
2015-1005 P-68 MOLDEX 5120 FFA1P2RD
2015-1006 P-68 MOLDEX COMPACT MASK 5230 FFA2P3
2015-1007 P-68 MOLDEX COMPACT PRE-FILTER 5991
2004-1802 P-91 MULTIFLEX STAND FOR BUMPERS
1010-7524 P-13 MULTIFUNCTIONAL PNEUMATIC GUN CRS 2100
2004-7071 P-79 MULTI-PAD TWISTER PLATE 150 MM 21 HOLES
2004-2700 P-79 MULTI-PAD TWISTER PLATE 150 MM 6 + 8 + 1 HOLES
4005-11433 P-70 MUTEXIL® OVERALL SIZE M
4005-21433 P-70 MUTEXIL® OVERALL SIZE L
4005-31433 P-70 MUTEXIL® OVERALL SIZE XL
4005-41433 P-70 MUTEXIL® OVERALL SIZE XXL
4004-5020 P-72 NEOPRENE GLOVES PERFECT FIT SIZE L
4004-5021 P-72 NEOPRENE GLOVES PERFECT FIT SIZE XL
4004-4831 P-72 NITRILE GLOVES PERFECT FIT
5000-0001 P-07 NITRO PUTTY
1002-7109 P-39 NON-DRIP PVC CUP
2004-2360 P-83 NYLON SANDING BLOCK
5002-1110 P-12 ONE STEP GLASS PRIMER
1008-1800 P-89 OPTIMUM LIGHT
2004-4040 P-45 OX-EAR HAIR PAINT BRUSH Nº 0
2004-4050 P-45 OX-EAR HAIR PAINT BRUSH Nº 1
2004-4060 P-45 OX-EAR HAIR PAINT BRUSH Nº 2
2004-4070 P-45 OX-EAR HAIR PAINT BRUSH Nº 4
2004-4080 P-45 OX-EAR HAIR PAINT BRUSH Nº 6
2004-4090 P-45 OX-EAR HAIR PAINT BRUSH Nº 8
2004-5000 P-45 OX-EAR HAIR PAINT BRUSH Nº 10
2004-5010 P-45 OX-EAR HAIR PAINT BRUSH Nº 12
2004-5020 P-45 OX-EAR HAIR PAINT BRUSH Nº 14
2004-7089 P-53 PAD CLEANER TOOL
2012-1421 P-43 PAINT PLASTIC CUP AND LID 0,5 L
2012-1422 P-43 PAINT PLASTIC CUP AND LID 1 L
2012-1423 P-43 PAINT PLASTIC CUP AND LID 1,8 L
2004-85840 P-53 PAINT RUN REMOVER
2012-2390 P-43 PAPER MIXING CUP
2006-70104 P-44 PAPER PAINT STRAINERS 125 MICRONS
2006-70103 P-44 PAPER PAINT STRAINERS 190 MICRONS
2011-1395 P-65 PAPER PROTECTING CARPET
4004-2244 P-71 PERFECT CUTTING GLOVES SIZE M
14
101
4004-2245 P-71 PERFECT CUTTING GLOVES SIZE L
4004-2246 P-71 PERFECT CUTTING GLOVES SIZE XL
2001-2440 P-60 PERFECT FOAM "T"
2011-1396 P-65 PLASTIC CAR COVER
8010-0004 P-55 PLASTIC CARE
8010-0005 P-55 PLASTIC CLEANER
2001-3525 P-59 PLASTIC FILM WITH MASKING TAPE 35 CM x 25 M
2001-6025 P-59 PLASTIC FILM WITH MASKING TAPE 60 CM x 25 M
2001-2580 P-59 PLASTIC FILM WITH MASKING TAPE 90 CM x 25 M
2001-12025 P-59 PLASTIC FILM WITH MASKING TAPE 120 CM x 25 M
2001-18025 P-59 PLASTIC FILM WITH MASKING TAPE 180 CM x 25 M
2001-1330 P-59 PLASTIC FILM WITH MASKING TAPE 35 CM x 25 Y
2001-1340 P-59 PLASTIC FILM WITH MASKING TAPE 60 CM x 25 Y
2001-1350 P-59 PLASTIC FILM WITH MASKING TAPE 90 CM x 25 Y
2001-1360 P-59 PLASTIC FILM WITH MASKING TAPE 120 CM x 25 Y
2001-1370 P-59 PLASTIC FILM WITH MASKING TAPE 180 CM x 25 Y
2006-2590 P-44 PLASTIC PAINT STRAINERS MESH 2000
2006-1060 P-44 PLASTIC PAINT STRAINERS MESH 5000
2006-1070 P-44 PLASTIC PAINT STRAINERS MESH 10000
9004-1072 P-53 PLATE SMART REPAIR 30 MM
9004-1071 P-53 PLATE SMART REPAIR 75 MM
2004-1690 P-46 PLATES FOR PAINT SAMPLES
1010-1188 P-12 PNEUMATIC GUN CRS 4547
4004-0250 P-71 POLY GREY GLOVES SIZE M
4004-0251 P-71 POLY GREY GLOVES SIZE L
4004-0252 P-71 POLY GREY GLOVES SIZE XL
2009-10001 P-70 POLYESTER OVERALL SIZE M
2009-10002 P-70 POLYESTER OVERALL SIZE L
2009-10003 P-70 POLYESTER OVERALL SIZE XL
2009-10004 P-70 POLYESTER OVERALL SIZE XXL
2009-1005 P-70 POLYESTER WHITE COAT SIZE M
2009-1006 P-70 POLYESTER WHITE COAT SIZE L
2009-1007 P-70 POLYESTER WHITE COAT SIZE XL
2009-1008 P-70 POLYESTER WHITE COAT SIZE XXL
2003-1040 P-41 POLYTEX CRS
2002-3071 P-62 PRE-CUT LIFTING TAPE 10 MM x 10 M
2002-3072 P-62 PRE-CUT LIFTING TAPE 15 MM x 10 M
2002-1570 P-62 PRE-CUT LIFTING TAPE 20 MM x 10 M
2008-56250 P-15 PREFABRICATED PU CORD 8 MM X 16 M
2008-56260 P-15 PREFABRICATED PU CORD 10 MM x 16 M
2004-0002 P-40 PRESSURISED PULVERISER
2001-2490 P-60 PRIME PROTECT MASKING FOAM TAPE
2004-1160 P-12 PRIMER APPLICATOR
2008-56290 P-15 PRIMER FOR PU CORD
1002-7101 P-39 PROJECTION KIT CRS-PRO 2011 1,3 MM
1002-7106 P-39 PROJECTION KIT CRS-W400 1,8 MM
1002-7111 P-39 PROJECTION KIT CRS-W400 2 MM
1002-7112 P-39 PROJECTION KIT CRS-W400 2,5 MM
1002-7104 P-39 PROJECTION KIT LVLP CRS-007X 1,3 MM
1002-7105 P-39 PROJECTION KIT LVLP CRS-007X 1,4 MM
1002-7110 P-39 PROJECTION KIT MINI TOUCH UP GUN 0,8 MM
1002-7103 P-39 PROJECTION KIT MINI TOUCH UP GUN 1,00 MM
2008-56295 P-15 PU CORD APPLICATOR ROLLER
5010-0002 P-49 QUARTZ 2500
5010-0102 P-49 QUARTZ 2500 FOAM PAD
5011-1069 P-34 QUICK 1K HIGH BUILDER DARK GREY
5011-1068 P-34 QUICK 1K HIGH BUILDER LIGHT GREY
5011-1070 P-34 QUICK 1K HIGH BUILDER WHITE
5002-1108 P-12 QUICK ACTIV GLASS
5006-1091 P-25 QUICK ADHESION PROMOTER
5011-6034 P-85 QUICK BLACK SPY
5011-1056 P-34 QUICK BODYPRIMER HS BLACK
5011-1057 P-34 QUICK BODYPRIMER HS GREY
5011-1058 P-34 QUICK BODYPRIMER HS WHITE
5011-6021 P-37 QUICK CLEAR LACQUER GLOSS
5011-6019 P-37 QUICK CLEAR LACQUER MATT
5011-6020 P-37 QUICK CLEAR LACQUER SATIN
5007-1088 P-26 QUICK CYAN
5007-1089 P-26 QUICK CYAN ACTIVATOR
5012-1119 P-94 QUICK DUST CABIN
5003-1041 P-13 QUICK FILL BLACK
5003-1037 P-14 QUICK FILL BRUSH
Index / Alphabetical Index by Description
102
5003-1094 P-13 QUICK FILL GREY
5003-1052 P-13 QUICK FILL WHITE
5003-1043 P-13 QUICK FLEX MS
5012-1070 P-94 QUICK GEL CABIN
5011-1077 P-14 QUICK GLUE
5013-1154 P-72 QUICK HAND CLEANER
5011-1117 P-29 QUICK HEATPROOF BLACK
5011-1116 P-29 QUICK HEATPROOF SILVER
5009-1194 P-38 QUICK HYDROCLEANER
5003-1045 P-15 QUICK METAL BONDING
5006-6029 P-22 QUICK MIX 4013
5006-1096 P-23 QUICK MIX EXPRESS
1010-7525 P-23 QUICK MIX GUN
5006-1099 P-23 QUICK MIX MIXING TIP
5006-1093 P-23 QUICK MIX UNIVERSAL
5003-6038 P-13 QUICK MS ECO 965 BLACK
5003-6032 P-13 QUICK MS ECO 966 WHITE
5011-1054 P-29 QUICK PIERRE FUSIL
5004-1083 P-25 QUICK PLAST-GEL BLACK 1000 ML
5004-1084 P-25 QUICK PLAST-GEL BLACK 150 ML
5004-1085 P-25 QUICK PLAST-GEL DARK GREY 1000 ML
5004-1086 P-25 QUICK PLAST-GEL DARK GREY 150 ML
5004-1107 P-25 QUICK PLASTIC PRIMER 1000 ML
5004-1106 P-25 QUICK PLASTIC PRIMER 400 ML
5010-1124 P-50 QUICK POLISH MOON 1 L
5010-1046 P-50 QUICK POLISH MOON 5 L
5002-1109 P-12 QUICK PRIMER GLASS
5012-0024 P-94 QUICK PRO-PEEL CABIN
5011-6039 P-29 QUICK RALLY GLOSS BLACK 500 ML
5004-6039 P-29 QUICK RALLY GLOSS BLACK 1000 ML
5011-6040 P-29 QUICK RALLY GLOSS WHITE
5011-6023 P-29 QUICK RALLY MATT BLACK 500 ML
5004-6023 P-29 QUICK RALLY MATT BLACK 1000 ML
5011-6024 P-29 QUICK RALLY SATIN BLACK 500 ML
5004-6024 P-29 QUICK RALLY SATIN BLACK 1000 ML
5004-1047 P-24 QUICK RCOLOR BLACK
5004-1048 P-24 QUICK RCOLOR DARK GREY
5005-1137 P-25 QUICK RSTORE
5011-6022 P-85 QUICK SANDING CONTROL
5002-1062 P-11 QUICK SEAL
5002-1107 P-11 QUICK SEAL MS 974
5002-1045 P-11 QUICK SEAL PLUS
5008-1055 P-17 QUICK SHIELD
5008-1039 P-17 QUICK SHIELD 2K PU BEIGE + HARDENER
5008-1038 P-17 QUICK SHIELD 2K PU BLACK + HARDENER
5011-1155 P-36 QUICK SPOTBLENDER 400 ML
5011-1156 P-36 QUICK SPOTBLENDER 1000 ML
5004-1034 P-24 QUICK TEX BLACK 400 ML
5004-1035 P-24 QUICK TEX BLACK 1000 ML
5004-1049 P-24 QUICK TEX GREY 400 ML
5004-1050 P-24 QUICK TEX GREY 1000 ML
5004-1036 P-24 QUICK TEX THICK BLACK 1000 ML
5004-1037 P-24 QUICK TEX THICK GREY 1000 ML
5011-1067 P-34 QUICK WASH PRIMER
5008-1036 P-18 QUICK WAX 400 ML
5008-1066 P-18 QUICK WAX 1000 ML
5011-1136 P-30 QUICK WHEEL SILVER 500 ML
5004-1136 P-30 QUICK WHEEL SILVER 1000 ML
5011-1073 P-34 QUICK ZINC
5011-1075 P-34 QUICK ZINC-ALU
1013-0020 P-80 ROTATING ORBITAL SANDER GPS304 - Ø 5 MM
1013-0021 P-80 ROTATING ORBITAL SANDER GPS305 - Ø 2,5 MM
1013-0023 P-80 ROTATING ORBITAL SANDER GPS306 - Ø 2,5 MM
2004-2450 P-83 RUBBER SANDING BLOCK BLACK
2004-2040 P-83 RUBBER SANDING BLOCK BROWN
2004-2350 P-83 SANDING BLOCKS CONCAVE
2004-1610 P-83 SANDING BLOCKS KIT
2004-1790 P-83 SANDING BLOCKS PLANE
2004-2610 P-81 SANDING PLANE WITH DUST EXTRACTION 70 MM x 125 MM
2004-2620 P-81 SANDING PLANE WITH DUST EXTRACTION 70 MM x 198 MM
2004-2260 P-81 SANDING PLANE WITH DUST EXTRACTION 70 MM x 400 MM
2004-2270 P-81 SANDING PLANE WITH DUST EXTRACTION 81 MM x 153 MM
14
103
2004-2280 P-81 SANDING PLANE WITH DUST EXTRACTION 115 MM x 230 MM
2004-7099 P-79 SANDING PLATE 75 MM 3 HOLES
2011-1394 P-65 SEAT COVER
2004-1720 P-08 SET OF 4 METAL SPATULAS (50, 80, 100 AND 200 MM)
2004-1620 P-08 SET OF 5 PLASTIC SPATULAS (5X100 MM)
2009-1680 P-69 SHOES COVER NON WOVEN
2009-2310 P-69 SHOES COVER PLASTIC PP
2009-2320 P-69 SHOES COVER TYVEK®
1007-5001 P-53 SMART REPAIR KIT
1001-7102 P-84 SODA BLASTING GUN
2004-2580 P-79 SOFT INTERFACE 75 MM
2004-2560 P-79 SOFT INTERFACE 150 MM 6 HOLES
2004-2570 P-79 SOFT INTERFACE 150 MM 9 HOLES
2004-7024 P-79 SOFT INTERFACE 150 MM 15 HOLES
2004-7022 P-79 SOFT INTERFACE 150 MM 21 HOLES
2003-1010 P-52 SOFTEX
2005-6000 P-18 SOUNDPROOF SHEET
1016-10001 P-21 SP WELDING
1016-10003 P-21 SP WELDING POCKET
2004-1700 P-08 SPATULA CLEANER
5012-1001 P-40 SPRAY GUN CLEANER 5 L
5012-1000 P-40 SPRAY GUN CLEANER 25 L
2004-3020 P-40 SPRAY GUN CLEANER KIT
2004-1813 P-90 STAND FOR DISMANTLED PARTS
2004-1811 P-90 STAND FOR SMALL PARTS
1016-10016 P-21 STAPLES SPW16
1016-10018 P-21 STAPLES SPW18
1016-10026 P-21 STAPLES SPW26
1016-10028 P-21 STAPLES SPW28
1016-10038 P-21 STAPLES SPW38
1016-10047 P-21 STAPLES SPW47
1016-10058 P-21 STAPLES SPW58
1016-10068 P-21 STAPLES SPW68
1016-10078 P-21 STAPLES SPW78
1016-10099 P-21 STAPLES SPW99
2007-1100 P-78 STAR BRITE DISC 150 MM GREY ULTRAFINE
2007-1110 P-78 STAR BRITE DISC 150 MM RED VERY FINE
2004-1701 P-08 STAR BRITE FOR SPATULA CLEANER
2007-1280 P-78 STAR BRITE ROLL 150 MM x 10 M GREEN GENERAL USE
2007-1120 P-78 STAR BRITE ROLL 150 MM x 10 M GREY ULTRA FINE
2007-1125 P-78 STAR BRITE ROLL 150 MM x 10 M RED VERY FINE
2007-1080 P-78 STAR BRITE SHEET 150 x 250 MM GREY ULTRAFINE
2007-1090 P-78 STAR BRITE SHEET150 x 250 MM RED VERY FINE
5009-1250 P-36 STAR LACK 1K
5009-1021 P-35 STAR LACK CLEAR COAT HS 4050 PLUS 1 L
5009-1022 P-35 STAR LACK CLEAR COAT HS 4050 PLUS 5 L
5009-1202 P-35 STAR LACK CLEAR COAT HS LVC 4020 1 L
5009-1195 P-35 STAR LACK CLEAR COAT HS LVC 4020 5 L
5009-1116 P-35 STAR LACK CLEAR COAT UHS 4000 1 L
5009-1110 P-35 STAR LACK CLEAR COAT UHS 4000 5 L
5009-1114 P-36 STAR LACK EXPRESS CLEAR COAT
5009-1115 P-36 STAR LACK EXPRESS HARDENER
5009-1138 P-35 STAR LACK HARDENER HS 2010 SLOW
5009-11017 P-35 STAR LACK HARDENER HS 2020 STANDARD 0,5 L
5009-1026 P-35 STAR LACK HARDENER HS 2020 STANDARD 2,5 L
5009-1141 P-35 STAR LACK HARDENER HS 2030 FAST
5009-1197 P-35 STAR LACK HARDENER HS LVC 1020 FAST
5009-1203 P-35 STAR LACK HARDENER HS LVC 1030 STANDARD 0,5 L
5009-1198 P-35 STAR LACK HARDENER HS LVC 1030 STANDARD 2,5 L
5009-1199 P-35 STAR LACK HARDENER HS LVC 1040 SLOW
5009-1200 P-35 STAR LACK HARDENER HS LVC 1050 EXTRA SLOW
5009-1111 P-35 STAR LACK HARDENER UHS 1000 FAST
5009-1117 P-35 STAR LACK HARDENER UHS 2000 STANDARD 0,5 L
5009-1112 P-35 STAR LACK HARDENER UHS 2000 STANDARD 2,5 L
5009-1113 P-35 STAR LACK HARDENER UHS 3000 SLOW
5009-1005 P-30 STAR LACK THERMO CERAMIC CLEAR COAT
5009-1006 P-30 STAR LACK THERMO CERAMIC HARDENER
5009-1002 P-37 STARLIGHT HARDENER
5009-1001 P-37 STARLIGHT POLYESTER
5009-1300 P-36 STARMATE CLEAR COAT
5009-1302 P-36 STARMATE HARDENER FAST 0,5 L
5009-1301 P-36 STARMATE HARDENER STANDARD 0,5 L
Index / Alphabetical Index by Description
104
2011-1392 P-65 STEERING WHEEL COVER
5008-1042 P-17 STONE CHIP PROTECTION KS-2000 BLACK
5008-1053 P-17 STONE CHIP PROTECTION KS-2000 GREY
5008-1054 P-17 STONE CHIP PROTECTION KS-2000 WHITE
5008-1043 P-17 STONE CHIP PROTECTION WB BLACK
5008-1044 P-17 STONE CHIP PROTECTION WB GREY
1009-7520 P-18 STONE CHIP QS 2K GUN
1009-7519 P-18 STONE CHIP STANDARD GUN
5015-0001 P-84 STRIPPING GEL 1 KG
5015-0002 P-84 STRIPPING GEL 5 KG
2002-3080 P-62 STRIPPING TAPE
1007-7530 P-86 STRIPPING TOOL CRS
2003-1030 P-41 TACK RAG
2003-2550 P-41 TACK RAG SPECIAL WATER-BASED PAINT
2001-1585 P-24 / 63 TEXTURED ADHESIVE PLASTIC
5009-1018 P-38 THINNER UNIVERSAL CARS SLOW 1 L
5009-1016 P-38 THINNER UNIVERSAL CARS SLOW 5 L
5009-1019 P-38 THINNER UNIVERSAL CARS STANDARD 1 L
5009-1020 P-38 THINNER UNIVERSAL CARS STANDARD 5 L
1009-3090 P-18 TIP FOR STONE CHIP 1 L GUN
1009-7521 P-18 TIP FOR STONE CHIP QS 2 K GUN
8010-0009 P-56 TIRE SHINE
2010-2487 P-72 TOP PRO GLOVES SIZE M
2010-2488 P-72 TOP PRO GLOVES SIZE L
2010-2489 P-72 TOP PRO GLOVES SIZE XL
2002-7020 P-61 “TOP” MASKING TAPE 18 MM x 45 M
2002-7021 P-61 “TOP” MASKING TAPE 24 MM x 45 M
2002-7022 P-61 “TOP” MASKING TAPE 36 MM x 45 M
2002-7023 P-61 “TOP” MASKING TAPE 48 MM x 45 M
2001-2450 P-60 TRIANGULAR MASKING FOAM TAPE
2009-0090 P-70 TYVEK PRO-TECH® OVERALL SIZE M
2009-0100 P-70 TYVEK PRO-TECH® OVERALL SIZE L
2009-0120 P-70 TYVEK PRO-TECH® OVERALL SIZE XXL
2009-0110 P-70 TYVEK PRO-TECH® OVERALL SIZE XL
2006-2200 P-46 UNIVERSAL SUCTION FILTER LARGE
2006-1040 P-46 UNIVERSAL SUCTION FILTER MEDIUM
4001-1619 P-68 VALUAIR PLUS BAYONET-MOUNTED FILTER A1
4001-1583 P-68 VALUAIR PLUS BAYONET-MOUNTED FILTER A2P3
4001-1590 P-68 VALUAIR PLUS FILTER RETAINER
4001-1573 P-68 VALUAIR PLUS MASK
4001-2800 P-68 VALUAIR PLUS PRE-FILTER P1
4001-2801 P-68 VALUAIR PLUS PRE-FILTER P2
4002-6193 P-69 V-MAXX GLASSES
4002-6437 P-69 V-MAXX LENS PROTECTIVE FILM
8010-0008 P-56 WHEEL CLEANER EXTRA STRONG
2001-1410 P-64 WHEEL COVER-PLASTIC
2001-2370 P-64 WHEEL COVER-PP
2011-1397 P-65 WHEEL RIM PROTECTOR FOR PAINTING
2004-1540 P-08 WHITE RUBBER SPATULAS
2010-2491 P-71 WORKEASY BLACK GLOVES SIZE M
2010-2492 P-71 WORKEASY BLACK GLOVES SIZE L
2010-2493 P-71 WORKEASY BLACK GLOVES SIZE XL
2001-2480 P-60 2 IN 1 MASKING FOAM TAPE
8010-0008 P-56 WHEEL CLEANER EXTRA STRONG
Polg. Ind. La Ermita, Centro de Empresas Granada,Edi�cio B, 2ª Planta, O�cinas 35-3818230 Atarfe (Granada) · ESPAÑA
Tel. (+34) 902 180 470 · Fax. (+34) 902 180 [email protected]
45 Rue de Villeneuve, Parc Tertiaire Silic94573 Rungis · FRANCE
Tel. (+33) (0) 141 735 438 · Fax. (+33) (0) 141 735 [email protected]
Ribeira de Eiras, Adémia3020 · 326 Coimbra · PORTUGAL
Tel. (+351) 239 433 720 · Fax. (+351) 239 433 [email protected]
Via Campazzi, 2321040 Gerenzano (Varese) · ITALIA
Tel. (+39) (0) 2 968 9862 · Fax. (+39) (0) 2 964 [email protected]
127, Rue Zoubeir Ibnou Al AouameRésidence Dounia, Quartier Des Roches Noires
20290 Casablanca · MAROCTél. (+212) (0) 522 247 811 · Fax. (+212) (0) 522 247 807