For Punching/Profiling/Routing

Compa�bility and stability

Interac�ve or fully automa�c nes�ng JETCAM Expert

www.jetcam.cominfo@jetcam.com

+44 (0)870 760 6469

JETCAM Expert provides a fully automa�c solu�on to create or import your CAD files, apply cu�ng informa�on and generate nests/NC code for your CNC machines. You can interact with the system at every stage - whether you need to amend a part’s geometry, modify how it is cut or change the sequence of cu�ng on the nest. Using RCP (Remote Control Processing), JETCAM Expert can be controlled fully automa�cally, via JETCAM Orders Controller (JOC), CrossTrack or external MRP systems, crea�ng a fully automated ‘black box’ CAM and nes�ng solu�on.

®

Developed since 1986, JETCAM Expert supports all 2D cu�ng technologies such as punch, laser, combina�on, rou�ng, plasma/oxyfuel, sonic knife and waterjet technologies. Hardware support is available for right angle shears, rou�ng rivet/screw inser�on, load/unload, etc., along with other automa�on features such as parametr ic programming, JET-Cut automa�c fly cu�ng, Automa�c Sheet Processing (ASP), common cu�ng, and more. Once set up, JETCAM generates 100% accurate NC code every �me.

Support for virtually every punch/profiling CNC available.

Interac�on and automa�on at every stage as required.

Scalable solu�on - entry level through to full automa�on.

Built-in CAD facility for making quick part amendments.

*Remote Control Processing op�on for unmanned nes�ng .

Tooling for mul�ple CNCs stored in one component file.

Automa�c report genera�on and report designer.

**Easily link to MRP systems for import/export of data .

Part and nest simulator, with run�me es�ma�on for cos�ng.

Flexible licensing, and ability to add JOC/CrossTrack later.

†Support for all major CAD formats .

Advanced features such as fly-cu�ng, auto sheet processing.

* Requires Expert Premium Connected Automa�on or JOC/CrossTrack.** Certain features require Expert Premium Connected Automa�on.† Expert 1 and above. Expert Lite supports DXF import only.

FeaturesE x p e r t V e r s i o n s

1 Premium

Interactive CAD with DXF viewing and export facility

Automatic tool selection

Interactive nesting (arrays, bump nesting (free hand) and mosaic nesting)

User definable machine macro commands

Automatic repositioning and continuation of a cut over a reposition where required

Automatic turret/magazine loading and Automatic Turret Nesting

Automatic placement of special tools, with new ‘exit direction’ feature to avoid collisions

Heat avoidance

CAD drawing import for popular CAD and machine tool vendor formats

Component revision control, providing safety when generating static or dynamic nests

Automatic micro-joints, lead-ins/outs, loops etc. Intelligently applied to parts nested at specific angles

Automatic nesting of a single component at 0 and 90 degrees

Automatic tool path and tool rotation optimisation with highly efficient sequencing of final cuts

Automatic parting and unloading of components at any angle

Multiple tool libraries

Full simulation capabilities with runtime estimation data available for costing

Bevelling support

© JETCAM International s.a.r.l. All trademarks acknowledged. E & O E. Certain features may be machine-dependant.

Automatic hazard avoidance (holes and forms)

Automatic sheet processing, including skeleton destruction, common line punching/cutting

Support for complex machines (i.e. FMC, FMS etc.) or machines with optional extras (tapping units etc)

Support for combination machines

Lite

DXF Only

Options

Single Component Automatic Processing (S.C.A.P.)

CAD Filtering (auto-repairing of ‘dirty’ CAD files)

Tool Teach Mode - ability to ‘learn’ preferred tooling methods

Remnant Material Management

N/A N/A

Automatic rectangular nesting of dissimilar components (RAN), with high performance nesting included (HP-RAN)

Parametric programming - Interactive

Automatic Punch Press/Right Angle Shear combination support

Automatic free form nesting of dissimilar components (FFAN), or high performance nesting module option (FFHPN)

Parametric programming - Automatic batch processing

Complex Loader/Unloader support (i.e. Finn-Power, Sheetmaster, Trumalift, Tecnology Italiana, Rainer, Pullmax etc.)

Interface to external data or MRP production control systems/built in material stock and order handling

Remote Control Processing (RCP) for full ‘black-box’ hands-off automation

Routing modules inc. 2D & 3D (double-sided) and automatic screw/rivet insertion/removal

Cutting machine module, for handling all aspects of composite and other material type cutting

Free Form Automatic nesting module option with read only materials and orders database

CA

Complete remote control ‘Connected Automation’ from external systems (e.g. MRP etc)

N/A

JET-Cut fully automatic Fly Cutting/JET-Optimizer

Industry-leading automation since 1986JETCAM Expert provides a wide range of

features to simplify the CAM and nes�ng

process. Func�ons such as JET-Cut,

Automa�c Sheet Processing (ASP), JET-

Op�mizer, Single Component Automa�c

Processing (SCAP), High Performance nes�ng

and Remote Control Processing (RCP) all play

a part in reducing machine run�me,

improving material efficiency, and reducing

programming �me/errors. Choose the

system you need now and upgrade in the

future, only paying the difference in price.