(L) Rev. MANUAL NO. 994198
part no.89220Explosimeter®
combustiblegas indicatormodel 2Ainstruction manual
IMPORTANT WARNINGTHIS MANUAL MUST BE CAREFULLY READ BY ALL INDIVIDUALS WHO HAVE OR WILL HAVE THE RESPONSIBILITY FORINSTALLING, USING, OR SERVICING THE PRODUCT. Like any pieceof complex equipment, the Explosimeter® Combustible Gas IndicatorModel 2A will perform as designed only if it is installed, used and serviced in accordance with the manufacturer's instructions.OTHERWISE IT COULD FAIL TO PERFORM AS DESIGNED ANDPERSONS WHO RELY ON THIS PRODUCT FOR THEIR SAFETYCOULD SUSTAIN SEVERE BODILY INJURY OR DEATH.
The warranties made by Mine Safety Appliances Company with respectto the product are voided if the product is not installed, used and serviced in accordance with the instructions in this manual. Pleaseprotect yourself and your employees by following them. We encourageour customers to write or call for a demonstration of this equipmentprior to use or for any additional information relative to use or repairs.
Manufactured by
L 696 (L) Rev. 7 MANUAL NO. 994198
MINE SAFETY APPLIANCES COMPANYPITTSBURGH, PENNSYLVANIA U.S.A. 15230
Manufactured by
MINE SAFETY APPLIANCES COMPANYPITTSBURGH, PENNSYLVANIA U.S.A. 15230
ULR
part no.89220Explosimeter®
combustiblegas indicatormodel 2Ainstruction manual
IMPORTANT WARNINGTHIS MANUAL MUST BE CAREFULLY READ BY ALL INDIVIDUALS WHO HAVE OR WILL HAVE THE RESPONSIBILITY FORINSTALLING, USING, OR SERVICING THE PRODUCT. Like any pieceof complex equipment, the Explosimeter® Combustible Gas IndicatorModel 2A will perform as designed only if it is installed, used and serviced in accordance with the manufacturer's instructions.OTHERWISE IT COULD FAIL TO PERFORM AS DESIGNED ANDPERSONS WHO RELY ON THIS PRODUCT FOR THEIR SAFETYCOULD SUSTAIN SEVERE BODILY INJURY OR DEATH.
The warranties made by Mine Safety Appliances Company with respectto the product are voided if the product is not installed, used and serviced in accordance with the instructions in this manual. Pleaseprotect yourself and your employees by following them. We encourageour customers to write or call for a demonstration of this equipmentprior to use or for any additional information relative to use or repairs.
PRODUCT OF U.S. PRODUCT OF U.S.9
(L) Rev. MANUAL NO. 994198
part no.89220Explosimeter®
combustiblegas indicatormodel 2Ainstruction manual
IMPORTANT WARNINGTHIS MANUAL MUST BE CAREFULLY READ BY ALL INDIVIDUALS WHO HAVE OR WILL HAVE THE RESPONSIBILITY FORINSTALLING, USING, OR SERVICING THE PRODUCT. Like any pieceof complex equipment, the Explosimeter® Combustible Gas IndicatorModel 2A will perform as designed only if it is installed, used and serviced in accordance with the manufacturer's instructions.OTHERWISE IT COULD FAIL TO PERFORM AS DESIGNED ANDPERSONS WHO RELY ON THIS PRODUCT FOR THEIR SAFETYCOULD SUSTAIN SEVERE BODILY INJURY OR DEATH.
The warranties made by Mine Safety Appliances Company with respectto the product are voided if the product is not installed, used and serviced in accordance with the instructions in this manual. Pleaseprotect yourself and your employees by following them. We encourageour customers to write or call for a demonstration of this equipmentprior to use or for any additional information relative to use or repairs.
Manufactured by
L 696 (L) Rev. 7 MANUAL NO. 994198
MINE SAFETY APPLIANCES COMPANYPITTSBURGH, PENNSYLVANIA U.S.A. 15230
Manufactured by
MINE SAFETY APPLIANCES COMPANYPITTSBURGH, PENNSYLVANIA U.S.A. 15230
ULR
part no.89220Explosimeter®
combustiblegas indicatormodel 2Ainstruction manual
IMPORTANT WARNINGTHIS MANUAL MUST BE CAREFULLY READ BY ALL INDIVIDUALS WHO HAVE OR WILL HAVE THE RESPONSIBILITY FORINSTALLING, USING, OR SERVICING THE PRODUCT. Like any pieceof complex equipment, the Explosimeter® Combustible Gas IndicatorModel 2A will perform as designed only if it is installed, used and serviced in accordance with the manufacturer's instructions.OTHERWISE IT COULD FAIL TO PERFORM AS DESIGNED ANDPERSONS WHO RELY ON THIS PRODUCT FOR THEIR SAFETYCOULD SUSTAIN SEVERE BODILY INJURY OR DEATH.
The warranties made by Mine Safety Appliances Company with respectto the product are voided if the product is not installed, used and serviced in accordance with the instructions in this manual. Pleaseprotect yourself and your employees by following them. We encourageour customers to write or call for a demonstration of this equipmentprior to use or for any additional information relative to use or repairs.
PRODUCT OF U.S. PRODUCT OF U.S.9