Eliminates drips and removesrequirement for messy andunreliable lube systems
www.SmartLubeSolutions.com
Solid fill acts as barrier to contaminations and delivers dry lubricant to the bearing
Applications• Bearings with inside diameter as small as 1/4” or up to 25”outside diameter (620 MM)
• Overhead trolley, crane wheels and turn rolls
• Food grade H1 requirement
• Paint line carriage systems and powder coat
• Heat treat
• Furnace /oven high temperature / Baking
• Table rolls/transfer tables
• Freezer or cryogenic
• Wire mill coiling tube
• Conveyor wheels
• Kiln carts
• Cooling bed rolls
• Hot saw rolls
• Printing
• Radiation
Limitations• High shock or excessive vibration.
• SmartLUBE is not a corrosion inhibitor. SmartLUBE HP should be considered in corrosive applications.
• Although most applications will fall within the speed capabilities of SmartLUBE, some high speed applications may be not suitable for SmartLUBE.
• In some high temperature applications, extra internal clearance and heat stabilized bearings may improve the performance of SmartLUBE.
FormulationsSmartLUBE • Extreme high temperature formula used primarily in heat treat, oven and furnace applications up to 660°F / 350°C
• Extreme low temperature –250°F / –160°C
• Heat stabilized bearings can be used
• Food Grade NSF H1
SmartLUBE HP• Increases speed capabilities
• Enhanced performance formula that treats raceways and rolling elements with special coating
• Reduces corrosion from oxidation
SmartLUBE VACUUM• MoS2 formula used in vacuum applications
Examples of bearings that benefit from SmartLUBE!
OverviewSmartLUBE Solid Lubricants enhance rolling element bearings by inserting a patented combination of graphite and other materials between the raceways and rolling elements.
Reduced maintenance costs and increased uptime by keeping bearings lubricated where normal grease and oil would otherwise lose film lubricant and fail.
Consistent low starting torque reduces energy costs and reduced maintenance costs increasing uptime by improving motor life.
Scrap and rework volumes are reduced increasing throughput.
Increased uptime and decreased maintenance costs and productivity losses with longer lasting bearings.
Bearings do not need to be re-lubricated after each cleaning cycle.
Energy savings and lower maintenance costs on drive systems results in longer gear and motor life.
Significant long term cost savings, increase uptime and peace of mind!
Delivers lubricant to rolling elements in high temperature up
to 660°F / 350°C.
Delivers lubricant to rolling elements in low temperature down
to –250°F / –160°C.
Dry lubricant that will not drip on finished or painted products.
Protects rolling element and raceway by creating physical barrier
to contaminants.
Solid lubricant will not wash away during sanitary cleaning processes.
Greatly minimized starting and running torque reduces AMP draw
on motors and drives.
Proven to be successful in a wide range of applications across
all industries.
Features Benefits+
Eliminates drips and removesrequirement for messy andunreliable lube systems
www.SmartLubeSolutions.com
Solid fill acts as barrier to contaminations and delivers dry lubricant to the bearing
Applications• Bearings with inside diameter as small as 1/4” or up to 25”outside diameter (620 MM)
• Overhead trolley, crane wheels and turn rolls
• Food grade H1 requirement
• Paint line carriage systems and powder coat
• Heat treat
• Furnace /oven high temperature / Baking
• Table rolls/transfer tables
• Freezer or cryogenic
• Wire mill coiling tube
• Conveyor wheels
• Kiln carts
• Cooling bed rolls
• Hot saw rolls
• Printing
• Radiation
Limitations• High shock or excessive vibration.
• SmartLUBE is not a corrosion inhibitor. SmartLUBE HP should be considered in corrosive applications.
• Although most applications will fall within the speed capabilities of SmartLUBE, some high speed applications may be not suitable for SmartLUBE.
• In some high temperature applications, extra internal clearance and heat stabilized bearings may improve the performance of SmartLUBE.
FormulationsSmartLUBE • Extreme high temperature formula used primarily in heat treat, oven and furnace applications up to 660°F / 350°C
• Extreme low temperature –250°F / –160°C
• Heat stabilized bearings can be used
• Food Grade NSF H1
SmartLUBE HP• Increases speed capabilities
• Enhanced performance formula that treats raceways and rolling elements with special coating
• Reduces corrosion from oxidation
SmartLUBE VACUUM• MoS2 formula used in vacuum applications
Examples of bearings that benefit from SmartLUBE!
OverviewSmartLUBE Solid Lubricants enhance rolling element bearings by inserting a patented combination of graphite and other materials between the raceways and rolling elements.
Reduced maintenance costs and increased uptime by keeping bearings lubricated where normal grease and oil would otherwise lose film lubricant and fail.
Consistent low starting torque reduces energy costs and reduced maintenance costs increasing uptime by improving motor life.
Scrap and rework volumes are reduced increasing throughput.
Increased uptime and decreased maintenance costs and productivity losses with longer lasting bearings.
Bearings do not need to be re-lubricated after each cleaning cycle.
Energy savings and lower maintenance costs on drive systems results in longer gear and motor life.
Significant long term cost savings, increase uptime and peace of mind!
Delivers lubricant to rolling elements in high temperature up
to 660°F / 350°C.
Delivers lubricant to rolling elements in low temperature down
to –250°F / –160°C.
Dry lubricant that will not drip on finished or painted products.
Protects rolling element and raceway by creating physical barrier
to contaminants.
Solid lubricant will not wash away during sanitary cleaning processes.
Greatly minimized starting and running torque reduces AMP draw
on motors and drives.
Proven to be successful in a wide range of applications across
![Page 1: Extend Bearing Life | Increase Uptime! The Leader in Solidadmin.bdi-usa.com/FileUploads/CMSFiles/SmartLube_4SinglePages[1].pdf · Extend Bearing Life | Increase Uptime! The Leader](https://reader033.documents.pub/reader033/viewer/2022041423/5e20a637b79f7546a113ed81/html5/thumbnails/1.jpg)
![Page 2: Extend Bearing Life | Increase Uptime! The Leader in Solidadmin.bdi-usa.com/FileUploads/CMSFiles/SmartLube_4SinglePages[1].pdf · Extend Bearing Life | Increase Uptime! The Leader](https://reader033.documents.pub/reader033/viewer/2022041423/5e20a637b79f7546a113ed81/html5/thumbnails/2.jpg)
![Page 3: Extend Bearing Life | Increase Uptime! The Leader in Solidadmin.bdi-usa.com/FileUploads/CMSFiles/SmartLube_4SinglePages[1].pdf · Extend Bearing Life | Increase Uptime! The Leader](https://reader033.documents.pub/reader033/viewer/2022041423/5e20a637b79f7546a113ed81/html5/thumbnails/3.jpg)
![Page 4: Extend Bearing Life | Increase Uptime! The Leader in Solidadmin.bdi-usa.com/FileUploads/CMSFiles/SmartLube_4SinglePages[1].pdf · Extend Bearing Life | Increase Uptime! The Leader](https://reader033.documents.pub/reader033/viewer/2022041423/5e20a637b79f7546a113ed81/html5/thumbnails/4.jpg)
