Final Screw- Unigrip

19.027

14.001 14.002 14.003

Impression Transfer

17.041 17.042

Straight Titanium Abutment

Price

Includes both open & closed tray screw

Single Unit $13$90

$13$90

$39

$49

Titanium Analog - For 3D Printed Models

10 Pack

Titanium Healing Abutment

3mm4mm5mm

$24

15º25º

Angled Titanium Abutment $75

Use same analog for both 3D printing and stone model

Page 1 of 10

Single Unit

EXTERNAL HEX UNIVERSAL - Compatible with Nobel Branemark®

RP NP4.1

10 Pack DLC Coated* Single Unit

5.0

35 ncm torque- Use Nobel or DESS unigrip star driver. DESS has drivers on page 9 and screw dimensions on page 10.

WP

19.027-P10$20

14.002-P10

17.043

20.001/3 20.002/3 20.003/3

20.001/4 20.002/4 20.003/4

20.001/5 20.002/5 20.003/5

13.001 13.002 13.003

22.001 22.002 22.003

23.002

3.5

collar height

19.227

2mm straight polished collar with 7mm chimney with SelectGrip sandblasted surface 35 ncm torque. Includes final screw. NP is 19.027, RP is 19.030, and WP is 19.229

2mm straight polished collar with 7mm chimney with SelectGrip sandblasted surface 35 ncm torque. Includes final screw. NP is 19.027, RP is 19.030, and WP is 19.229

* DLC Coating is a diamond like coating that reduces friction to deliver a higher gripping force at lower tightening torque value.

19.028 19.028-P1019.228

19.029 19.029-P1019.229

$27$90

$27

$90

$45

$31

All Plastic Castable Abutment

ø10mmD

ø14mmD

$38

$45

Premilled Abutment BlankTitanium

Chrome Cobalt

$25

Page 2 of 10

Titanium Temporary Abutment

$49

Chrome Cobalt Abutment

31.001

24.001 24.002 24.003

25.001 25.002 25.003

28.001 28.002 28.003

11.002-P10

29.001 29.002 29.003

12.002-P10

61.001 61.002 61.003

71.001 71.002 71.003

52.001 52.002 52.003

30.001 30.002 30.00331.002 31.003

EXTERNAL HEX UNIVERSAL - Compatible with Nobel Branemark®

ENE

Includes final screw. NP is 19.027, RP is 19.030, and WP is 19.229 - 35ncm torque

Single Unit

E

NE

ENE

Single Unit10 Pack

10 Pack

Single unit includes final screw. NP is 19.027, RP is 19.030, and WP is 19.229 - 35ncm torque.10 packs the screws are sold seperately

Includes wax up sleeve and final screw. NP is 19.027, RP is 19.030, and WP is 19.229 - 35ncm torque

Volume discounts available - Please contact us for details. Includes final screw.

NP is 19.027, RP is 19.030, and WP is 19.229 - 35ncm torque.

Desktop Scan Body - Round top

50.001 50.002 50.003

Screw sold seperately - NP is 19.027, RP is 19.030, and WP is 19.229

Intraoral Scan Body

E Engaging NE Non Engaging

ENE

Price

RP NP4.1 5.0

WP 3.5

$55Intra Oral Scan Body Driver

DTPEI

Hand driver for tightening and loosening of ALL DESS intraoral scan bodies (parts 52.xxx).

Made of PEEK, autoclavable, multiple use, hand tighten. The top part has an embedded screw for correct positioning, flat top and triangle for accurate scanning. The bottom part has internal screw threads to ensure the screw correctly engages into the implant every time. 7.5mm height x 4mm width. Also available in titanium with hard anodized surface - contact use for details. Hand tighten or use IO scan body driver part DTPEI.

NP RP WPGREEN3.5

PURPLE4.5

YELLOW5.7

$39Straight Ti base

AngleBase® Ti Base $39

Collar Height

0,3mm 15.001 15.002 15.003

1,5mm 15.201 15.202 15.203

3,0mm 15.301 15.302 15.303

0,3mm 16.001 16.002 16.003

1,5mm 16.201 16.202 16.203

3,0mm 16.301 16.302 16.303

36.001 36.00237.001 37.002

EXTERNAL HEX UNIVERSAL - Compatible with Nobel Branemark®

Price

RP NP4.1 5.0

WP 3.5

Scan Body on Tibase $59

53.100P10 53.200P10E

NE

E

NE

E

NENE

E

Includes final screw. NP is 19.027, RP is 19.030, and WP is 19.229 - 35ncm torque.

$5032.001-P5

33.001-P5

Plastic sleeves for Straight Ti base

ENE

5 Pack

For custom restorations that are cemented to the tibase, not for direct casting. For all platforms.

Up to 25º Angulated Screw Channel

24mm 35mm

DT24TB06 DT35TB06

$47

Total Length: 20mm

AngleBase® Latch Driver

DT20TB06

$13

Includes screw part#19.401 (for NP) and screw part# 19.402(for RP).Includes final screw part # 19.442 . Torque is 35 ncm. Requires Angle Base latch driver.

AngleBase® Final Screw

Torque is 35 ncm. Requires Angle Base latch driver.

19.401 19.402

Page 3 of 10

0º

10º

20º

$5033.100-P533.101-P5

33.102-P5NENE

NE

E Engaging NE Non Engaging

Plastic sleeves for AngleBase®

The internal connection of this castable sleeve is non engaging.The angle base ti base is not designed to be casted so when using this sleeve you would cement the restoration onto the anglebase.

Slides on tibase or AngleBase and can be scanned intraorally or with a lab scanner. FREE STL file - send request to info@dess-usa.com. For more information click this web link - CLICK HERE

Engaging Non Engaging

53.100P10 53.200P10

53.100P10 53.200P10

DESS LOC

1.0mm 88.001/1 88.002/1

2.0mm 88.001/2 88.002/2

3.0mm 88.001/3 88.002/3

4.0mm 88.002/4

$65

DESS LOC Analog

14.054Pack of 10 14.054-P10

DESS LOC Transfer

Closed tray made of POM 17.054

DESS LOC Retention Kits

x1 DLRK-P1 $25

$49divergence up to 20º

x2 DLRK-P2

divergence up to 40ºx1 DLER-P1

x2 DLER-P2

$13

$90

$21

$25

$49

Torque is 30ncm

DESS LOC is compatible with Zest® instruments, inserts, and housings.

Page 4 of 10

20º x4 1.5 Ibs / 680g DLN2-P4

20º x4 3.0 Ibs / 1360g DLN3-P4

20º x4 5.0 Ibs / 2270g DLN4-P4

40º x4 1.0 Ibs / 450g DLN1-P4

40º x4 2.0 Ibs / 910g DLN6-P440º x4 4.0 Ibs/ 1810g DLN7-P4

divergencebetweenimplants

up to

up to

up to

up to

up toup to

Inserts $21

Inserts sold in pack of 4

Single Unit

Gingival Height

88.002/55.0mm

DESS LOC for Nobel Branemark®

Price

DESS LOC is compatible with Zest® instruments, inserts, and housings.We have other collar heights and angled Locators - contact us for info.

RP NP4.13.5

DESS Multiunits for Nobel Branemark®

$60

$84

MULTI-UNIT PLATFORM

4.8

3.5/NP 4.1/RP

$40

All multiunits includes DLC screw. Straight multiunit torque is 35ncm. Use Straight multiunit driver from Nobel or DESS part DTMURP.Angled multiunit torque is 20ncm. Use Nobel Unigrip star driver.

17º

30º

Straight Multiunit Abutment

1,0mm

2,0mm

3,0mm

4,0mm

4,0mm

5,0mm

5,0mm

2,0mm

3,0mm

4,0mm

40.001/1 40.002/1 40.003/1

40.001/2 40.002/2 40.003/2

40.001/3 40.002/3 40.003/3

40.002/4

40.002/5

41.701/2** 41.702/2

41.701/3** 41.702/3

41.702/4

43.002/4

43.002/4R

43.002/5

43.002/5R

5.0/WP

4.8 6.5

17.05017.007

collar height

collar height

17º 17º & 30º

30º

17º

Price

4,0mm

5,0mm

NENENENENE

EEE

ENE

NE

Impression Transfer for Multiunit

Includes both open & closed tray screw

17.007

Hand tightens onto multiunit. Available as single and pack of 4 (P4)

17.50717.507-P417.80717.807-P4

$16$58$16$58

Height 5mm5mm8mm8mm

Closed Tray Impression Transfer for Multiunit Platform 4.8

These will not work on Nobel WP, use impression transfer 17.050.

14.00714.007-P10

$13$9010 Pack

Single Unit

Use same analog for both 3D printing and stone model.14.047 is for the 6.5 wide platform MUA only.

Titanium Multiunit Analog - for 3D Printed Models

14.04714.047-P10

Page 5 of 10E Engaging NE Non Engaging

WP- 6.5

WP- 6.5

Angled Multiunit Abutment

E

Compatible with Nobel Branemark® Multiunit and DESS Multiunits for Branemark®

Price

Page 5 of 10

Multiunit Titanium Healing Abutment

$24

$25

$49

20.100 Use Nobel driver to tighten/loosen healing abutment

$55Intra Oral Scan Body Driver

DTPEI

Hand driver for tightening and loosening of ALL DESS intraoral scan bodies (parts 52.xxx).

52.007

Desktop Scan Body for Multiunit

50.007Screw sold seperately. Use screw part #19.106 or any multiunit screw on page 4.

Intra Oral Scan Body for Multiunit

$3915.00715.007/8

6.0mm vertical wall shaft

8.0mm vertical wall shaft

Presandblasted for you.Includes multiunit screw part #19.006 for Nobel unigrip/star driver. For Bulk orders we can package it with any screw you wish.

Straight Multiunit Ti Bases

$13Multiunit Screw - Nobel Unigrip

19.00619.006 - P10 $90

Single Unit10 PackTorque screw to 15ncm

This screw will fit into the tops of the following multiunits - Nobel, DESS, BioHorizons, 3i, Megagen, Hiossen, Neodent, Astra EV Multibase. Additional screws on page 8 and Screw measurement information on page 9.

BULK ORDER PRICING AVAILABLE

All of these components will work on top of the following multiunit abutments which all have a 4.8 diameter Nobel, BioHorizons, 3i, Megagen, Hiossen, Neodent, BSB, Astra EV Multibase, and DESS Multiunits.The Branemark 5.0 Multiunits have a 6.5 platform.

15.054

50.047

52.047

WP6.5

RP4.8

20.054

19.03119.031 - P10

A hard anodized matted surface ideal for scanning, made of titanium, autoclavable, and for multiple use. The top part has an embedded screw for correct positioning, flat top and triangle for accurate scanning. The bottom part has internal screw threads to ensure the screw correctly engages into the implant every time. 7.5mm height x 4mm width. Hand tighten or use IO scan body driver part DTPEI.

Peek Titanium PeekTitanium

53.007FREE

Multiunit Scan Body on Ti base - FREE STL File only

NE

Slides on top of parts 15.007 or 36.007 only. STL available by emailing info@dess-usa.com. For more information click this web link - CLICK HERE

Compatible with Nobel Branemark® Multiunit and DESS Multiunits for Branemark®

Page 6 of 10

$39

$13

19.306

Screw for AngleBase Ti Base for Multiunit

Torque screw to 15ncm

DT20TB06 DT24TB06 DT35TB06

$47

Total Length: 20mm 24mm 35mm

AngleBase Ti Base for Multiunit

36.007 36.0544.5mm vertical wall shaft for maximum bond retentionPresandblasted for youIncludes AngleBase screw part #19.306 (4.8) and 19.331 (6.5). Requires AngleBase Latch Driver

Up to 25º Angulated Screw

Channel

Price

28.007Single UnitPack of 10 11.007-P10

$27

$90

$45

$31Titanium Temporary Abutment on top of Multiunit

24.007

Includes multiunit screw part #19.006 (4.8) and 19.031 (6.5) . Use the Nobel unigrip/star driver. See page 9 for drivers. 1.5 collar height, total height including collar is 12mm.

All Plastic Castable Abutment on top of Multiunit

BULK ORDER PRICING AVAILABLE

Single unit includes multiunit screw part #19.006(4.8) or for Nobel unigrip/star driver. Pack of 10 - screw is sold seperately

Chrome Cobalt Abutment on top of Multiunit

30.007

Includes multiunit screw part #19.006 (4.8) and 19.031 (6.5). Use the for Nobel unigrip/star driver. See page 9 for drivers.

DESS LOC on top of Multiunit 88.007

$65

Zest® CompatibleTotal height is 4.30mm, with collar height of 2.80mm and 1.50mm is for metal housing and insert. 20ncm torque.

All of these components will work on top of the following multiunit abutments which all have a 4.8 platform diameter Nobel, BioHorizons, 3i, Megagen, Hiossen, Neodent, BSB, Astra EV Multibase, and DESS Multiunits.The Branemark 5.0 Multiunits have a 6.5 platform.

AngleBase Latch Driver

19.331

24.030

28.05411.054-P10

30.054

WP

6.5

RP

4.8

32.007-P5 Pack of 5$50

All plastic castable sleeve for on top of multiunit tibase 15.007

Plastic sleeves for casting or pressing. Castable should be cemented to ti base only. Screw sold seperately.

32.054-P5

Page 7 of 10 BULK ORDER PRICING AVAILABLE

$13

This screw will fit into the tops of the following multiunits - Nobel, DESS, BioHorizons, 3i, Megagen, Hiossen, Neodent, Astra EV Multibase. Screw measurement information on page 10

.048/1.20 hex screw for Multiunit - use .048 Driver from 3i , Megagen, Hiossen

DLC Coated screw for Multiunit - use staru unigrip driver from Nobel or DESS

19.206 $20

$13.0501.27 hex screw for Multiunit - use .050 Driver from Zimmer, BioHorizons, DESS

19.110

$1319.105

19.105-P10Single Unit10 Pack $90

Torque screw to 15ncm

Torque screw to 15ncm

Torque screw to 15ncm

Price

$13Torque screw to 15ncm Single Unit 19.041

Flat head Torx screw for Straumann Multi-base - use driver from Straumann or DESS

This screw will fit into the tops of the following multiunits - Nobel, DESS, BioHorizons, 3i, Megagen, Hiossen, Neodent, Astra EV Multibase. Screw measurement information on page 10

This screw will fit into the top of the Straumann Multi-base only.

Beveled head Torx screw for Straumann Multi-base - use driver from Straumann or DESS

This screw will fit into the top of the Straumann Multi-base only.

Compatible with Nobel Branemark® Multiunit and DESS Multiunits for Branemark® All of these components will work on top of the following multiunit abutments which all have a 4.8 platform diameter Nobel, BioHorizons, 3i, Megagen, Hiossen, Neodent, BSB, Astra EV Multibase, and DESS Multiunits.The Branemark 5.0 Multiunits have a 6.5 platform.

19.231

WP6.5

RP4.8

19.106- for 3i Low Abutment OnlyTorque screw to 10ncm

If you wish to use the DESS multiunit tibases with a .048/1.2 hex screw use part TL.106. Contact us to order.

Drivers, Handles, and Adaptors

DT35U

Page 8 of 10

$35

Price

$35

Unigrip/ Star - Latch Driver ( for Nobel) - Laser Mark UG

DT20U DT24U

Torx® Latch Driver (for Straumann) - Laser Mark T06

$35

DT20T06 DT24T06 DT35T06

.050/1.27mm Hex Latch Driver (for Zimmer, BioHorizons, Astra, ID)- Laser Mark 1.27 $35

7mm MDTMAN7009mm MDTMAN900

$35

$65

$35

$45

$35

$45

$35

DT18H120 DT20H1DT20H120 DT24H120 DT35H120

Laboratory handle- for latch drivers MDTLAA

Thumb Knob handle for Latch Drivers

Latch style handpiece adaptor for 4x4 Square Connection

DTANGSQ

4x4 Square Driver for inserting Straight Multiunit Abutments

DTMURP

4x4 Square Driver for latch style driver

DTNBSQ

Adaptor from Straumann torque wrench to 4x4 square connection

$45

TWADAP

4x4 Square Driver for DESS LOC

DTLOC

Adaptor from Nobel torque wrench to 4x4 square connection

$45

$45

DTSTSQ

Nobel Biocare Contra Angle Adaptor

DTNBCA

Straumann Contra Angle Adaptor

DTC20H127 DT24H127 DT35H127

048/1.20mm Hex Latch Driver (for 3i, Megagen, Hiossen) - Laser Mark 1.2

DTSTCA

35mm

All drivers lengths are the overall length

18mm 20mm 24mm

DESSREFERENCE

EQUIVALENT REF.Nº OF ORIGINAL IMPLANT BRAND

PACK OF 10 AVAILABLE

PLATFORM 1. SCREW SOCKET

2. HEAD DIAMETER

19.027 31168available

NP UG 2,23

19.227 29282 NP UG 2,23

19.327 NP Torx® 06 2,30

19.101available

NP UG 2,23

19.028 29290available

RP UG 2,53

19.228 29283 RP UG 2,53

19.328 RP Torx® 06 2,60

19.029 31169available

WP UG 3,40

19.229 29284 WP UG 3,40

19.329 WP Torx® 06 3,40

19.401 NP Torx® 06 2,10

19.402 RP Torx® 06 2,50

standa

rd

standa

rd

standa

rd

DESSREFERENCE

EQUIVALENTREF.Nº OFORIGINALIMPLANTBRAND

PACKOF 10AVAILABLE

PLATFORM 1. SCREWSOCKET

2. HEADDIAMETER

3. HEAD BASE ANGLE

4. DISTANCEBETWEEN SCREW HEAD ANDIMPLANT PLATFORM

5. OVERALL LENGTH

6. HEAD LENGTH

7. DISTANCE FROM THREAD TO HEAD

8. THREAD LENGTH

9. THREAD KIND

RECOM-MENDED TORQUE

COMMENTSScrews fitting Nobel Brånemark® implants and similar external hex implant systems

19.027 31168available

NP UG 2,23

19.227 29282 NP UG 2,23

19.327 NP Torx® 06 2,30

19.101available

NP UG 2,23

19.028 29290available

RP UG 2,53

19.228 29283 RP UG 2,53

19.328 RP Torx® 06 2,60

19.029 31169available

WP UG 3,40

19.229 29284 WP UG 3,40

19.329 WP Torx® 06 3,40

19.401 NP Torx® 06 2,10

19.402 RP Torx® 06 2,50

72º 7,35 1,90 2,70 2,75 M1,6 35Ncm Standard screw

72º 7,35 1,90 2,70 2,70 M1,6 35Ncm 19.027 DLC coated version

0º 6,95 1,50 2,70 2,75 M1,6 35NcmSpecial screw head design Torx for angulated screw channels up to 25º

0º 1,80 7,35 1,90 2,70 2,75 M1,6 35NcmFlat seat screw. Better for bridges, structures and zirconia abutments.

0º 1,80 7,35 2,14 2,40 2,81 M2,0 35NcmStandard screw. Can be used for single crowns or bridges, structures and zirconia abutments.

0º 1,80 7,35 2,14 2,40 2,81 M2,0 35Ncm 19.028 DLC coated version

0º 7,60 1,50 2,10 4,00 M2,0 35NcmSpecial screw head design Torx for angulated screw channels up to 25º

0º 2,00 7,10 1,40 2,70 3,00 M2,5 35NcmStandard screw. Can be used for single crowns or bridges, structures and zirconia abutments

0º 2,00 7,10 1,40 2,70 3,00 M2,5 35Ncm 19.029 DLC coated version

0º 7,20 1,50 2,70 3,00 M2,5 35NcmSpecial screw head design Torx for angulated screw channels up to 25º

0º 1,70 6,10 1,40 2,50 2,20 M1,6 35NcmReplacement screw for DESS ANGLEBase®

0º 1,80 5,90 1,40 1,65 2,80 M2,0 35NcmReplacement screw for DESS ANGLEBase®

Screw Dimensions

Page 8 of 10Page 8 of 10Page 8 of 10Page 8 of 10

Page 9 of 10

DESSREFERENCE

EQUIVALENT REF.Nº OF ORIGINAL IMPLANT BRAND

PACK OF 10 AVAILABLE

PLATFORM 1. SCREW SOCKET

2. HEAD DIAMETER

Screws fitting Multi-unit® implant systems

19.006 29287available

RP (4,8) UG 2,00

19.206 29285 RP (4,8) UG 2,00

19.306 RP (4,8) Torx® 06 2,20

19.031 31163available

WP (6,0) UG 2,50

19.231 29286 WP (6,0) UG 2,50

19.331 WP (6,0) Torx® 06 2,50

standa

rd

standa

rd

DESSREFERENCE

EQUIVALENTREF.Nº OFORIGINALIMPLANTBRAND

PACKOF 10AVAILABLE

PLATFORM 1. SCREWSOCKET

2. HEADDIAMETER

3. HEAD BASE ANGLE

4. DISTANCEBETWEEN SCREW HEAD ANDIMPLANT PLATFORM

5. OVERALL LENGTH

6. HEAD LENGTH

7. DISTANCE FROM THREAD TO HEAD

8. THREAD LENGTH

9. THREAD KIND

RECOM-MENDED TORQUE

COMMENTS

Screws fitting Multi-unit® implant systems

19.006 29287available

RP (4,8) UG 2,00

19.106 LPCTSHavailable

RP (4,8) H1,20 2,25

19.206 29285 RP (4,8) UG 2,00

19.306 RP (4,8) Torx® 06 2,20

19.110 H1,27 2,00

19.031 31163available

WP (6,0) UG 2,50

19.231 29286 WP (6,0) UG 2,50

19.300 RP (4,8) Torx® 06 2,15

19.331 WP (6,0) Torx® 06 2,50

0º 2,80 3,45 1,35 0,00 2,10 M1,4 15NcmStandard screw. Can be used for bridges, structures and Zirconia abutments

0º 2,80 3,45 1,35 0,00 2,10 M1,4 15Ncm 19.006 DLC coated version

0º 3,60 1,50 0,00 2,00 M1,4 15NcmReplacement screw for DESS ANGLEBase®. Special screw head design Torx for angulated screw channels up to 25º

0º 4,35 1,65 0,00 2,70 M1,8 15NcmStandard screw. Can be used for bridges, structures and Zirconia abutments

0º 4,35 1,65 0,00 2,70 M1,8 15Ncm 19.031 DLC coated version

0º 4,20 1,50 0,00 2,70 M1,8 15NcmReplacement screw for DESS ANGLEBase®. Special screw head design Torx for angulated screw channels up to 25º

Page 10 of 10

Screw Dimensions

130130

DESSREFERENCE

EQUIVALENT REF.Nº OF ORIGINAL IMPLANT BRAND

PACK OF 10 AVAILABLE

PLATFORM 1. SCREW SOCKET

2. HEAD DIAMETER

DESS

Screws fitting Nobel Replace® implants and similar tri-lobe implant systems

19.004 31170available

NP UG 2,45

19.204 36818 NP UG 2,45

19.304 NP Torx® 06 2,50

19.005 29293available

RP/WP UG 2,45

19.205 29475 RP/WP UG 2,45

19.305 RP/WP Torx® 06 2,60

19.404 NP Torx® 06 2,30

19.405 RP/WP Torx® 06 2,45

Screws fitting Nobel ActiveTM implants and similar implant systems

19.027 31168available

NP UG 2,23

19.227 29282 NP UG 2,23

19.101available

NP UG 2,23

19.327 NP Torx® 06 2,30

19.030 28815available

RP UG 2,53

19.230 36918 RP UG 2,53

19.328 RP Torx® 06 2,60

19.441 NP Torx® 06 2,10

19.442 RP Torx® 06 2,45

SCREW SELECTION GUIDE

standa

rd

standa

rd

standa

rd

standa

rd

SCRE

W SE

LECT

ION

GUI

DE

131131

DESSREFERENCE

EQUIVALENTREF.Nº OFORIGINAL IMPLANT BRAND

PACKOF 10 AVAILABLE

PLATFORM 1. SCREW SOCKET

2. HEAD DIAMETER

3. HEAD BASE ANGLE

4. DISTANCEBETWEEN SCREW HEAD ANDIMPLANT PLATFORM

5. OVERALL LENGTH

6. HEAD LENGTH

7. DISTANCE FROM THREAD TO HEAD

8. THREAD LENGTH

9. THREAD KIND

RECOM-MENDED TORQUE

COMMENTS

Screws fitting Nobel Replace® implants and similar tri-lobe implant systems

19.004 31170available

NP UG 2,45

19.204 36818 NP UG 2,45

19.304 NP Torx® 06 2,50

19.005 29293available

RP/WP UG 2,45

19.205 29475 RP/WP UG 2,45

19.305 RP/WP Torx® 06 2,60

19.404 NP Torx® 06 2,30

19.405 RP/WP Torx® 06 2,45

Screws fitting Nobel ActiveTM implants and similar implant systems

19.027 31168available

NP UG 2,23

19.227 29282 NP UG 2,23

19.101available

NP UG 2,23

19.327 NP Torx® 06 2,30

19.030 28815available

RP UG 2,53

19.230 36918 RP UG 2,53

19.328 RP Torx® 06 2,60

19.441 NP Torx® 06 2,10

19.442 RP Torx® 06 2,45

0º 0,80 8,30 1,70 4,00 2,60 M1,8 35NcmStandard screw. Can be used for single crowns or bridges, structures and zirconia abutments

0º 0,80 8,30 1,70 4,00 2,60 M1,8 35Ncm 19.004 DLC coated version

0º 8,10 1,50 4,00 2,60 M1,8 35NcmSpecial screw head design Torx for angulated screw channels up to 25º

0º 0,80 9,90 1,50 4,90 3,50 M2,0 35NcmStandard screw. Can be used for single crowns or bridges, structures and zirconia abutments

0º 0,80 9,90 1,50 4,90 3,50 M2,0 35Ncm 19.005 DLC coated version

0º 9,90 1,50 4,90 3,50 M2,0 35NcmSpecial screw head design Torx for angulated screw channels up to 25º

0º 0,50 7,20 1,40 3,53 2,25 M1,8 35NcmReplacement screw for DESS ANGLEBase®

0º 0,50 8,05 1,40 4,60 2,05 M2,0 35NcmReplacement screw for DESS ANGLEBase®

72º 7,35 2,20 2,40 2,75 M1,6 35Ncm Standard screw

72º 7,35 2,20 2,40 2,75 M1,6 35Ncm 19.027 DLC coated version

0º 0,50 7,35 1,90 2,70 2,75 M1,6 35NcmFlat seat screw. Better for bridges, structures and zirconia abutments

0º 6,95 1,50 2,70 2,75 M1,6 35NcmSpecial screw head design Torx for angulated screw channels up to 25º

54º 7,35 2,30 2,24 2,81 M2,0 35Ncm Standard screw

54º 7,35 2,30 2,24 2,81 M2,0 35Ncm 19.030 DLC coated version

0º 7,60 1,50 2,10 4,00 M2,0 35NcmSpecial screw head design Torx for angulated screw channels up to 25º

0º 1,00 7,30 1,40 3,90 2,00 M1,6 35Ncm Replacement screw for DESS ANGLEBase®

0º 0,70 7,20 1,40 3,75 2,05 M2,0 35NcmReplacement screw for DESS ANGLEBase®

DESS

SCREW SELECTION GUIDE

SCRE

W SE

LECT

ION

GUID

E