VF55mm is a unique two part glazing profile which integrates fully with Brett Martin Clickfix1040 modular polycarbonate glazing panels to create a seamless facade. For use in applications up to 6m, internally and externally, the patented design of VF55mm glazing bars provides for simple installation of the Marlon Clickfix1040 glazing panels which can be simply set into the system without rotation. Fully water managed, the panel is cantilevered within the profile over a concealed drainage channel allowing any water to freely drain via the shadow gap. Providing exceptional sealing capability the E gasket may be used throughout the system in 3 different sealing locations. www.marlonclickfix.com FACADES & CLADDING INSTALLATIONS UP TO 6m OTHER SYSTEMS • Marlon Clickfix1040 VF 90mm – Vertical Installations from 6-12m • Marlon Clickfix1040 RL 80mm – Rooflight Installations up to 6m (min pitch 5˚)
Transcript
VF55mm is a unique two part glazing profile which integrates fully with Brett Martin Clickfix1040 modular polycarbonate glazing panels to create a seamless facade. For use in applications up to 6m, internally and externally, the patented design of VF55mm glazing bars provides for simple installation of the Marlon Clickfix1040 glazing panels which can be simply set into the system without rotation. Fully water managed, the panel is cantilevered within the profile over a concealed drainage channel allowing any water to freely drain via the shadow gap. Providing exceptional sealing capability the E gasket may be used throughout the system in 3 different sealing locations.
www.marlonclickfix.com
FACADES & CLADDINGINSTALLATIONS UP TO 6m
OTHER SYSTEMS
• Marlon Clickfix1040 VF 90mm – Vertical Installations from 6-12m
• Marlon Clickfix1040 RL 80mm – Rooflight Installations up to 6m (min pitch 5˚)
ALUMINIUM PROFILE OPTIONS• Standard: Mill or Anodised finish
• Optional Extra: Super durable polyester powder coating from Akzo Nobel (semi-gloss/matt)
GLAZING OPTIONSVF55mm is glazed with Marlon Clickfix1040 multiwall polycarbonate glazing panels
• Thickness: 40mm 10 wall
• Protective coatings: Standard single sided UV protection (can be optimised for climatic conditions)
• Specials: Double sided UV protection
• Colours tints: Glass Clear, Pearlescent (special colours and colour matching available subject to minimum order quantities)
SYSTEM BENEFITS• Ease of installation
• Cost effective
• Seamless design
KEY BENEFITS• Discreet 55mm profile
• Pre-formed 90 degree corners
• Two part profile with unique rotational connection improving ease and speed of installation
• Same profile used in all orientations saving time and money
• Easy to secure in either plane, with hidden fixings providing a better aesthetic
• Allows removal and replacement of panels if required
• Water managed profile, drained via shadow gap so there are no visible drainage outlets
• External profile protects and hides base fixing
• Internal panel is cantilevered, improving ventilation
• Co-extruded temperature stable gasket used in all sealing locations
• Multi-functional bracket
• Moulded junction bracket with plate compression gaskets
• Anodised or polyester powder coated
• Patent Pending and European registered design
• Tested to relevant industry standards and performance criteria
SYSTEM CAPABILITIES• 6m height x any run length
APPLICATIONS Suitable for both internal and external applications including:
• Vertical facades
• Cladding
• Partitioning
• Rain screens Sheffield Academy
Quad One
LEISURE
Sainsbury’s
RETAIL
EDUCATION
INSTALLATION & COMPONENTSInstallation of VF55mm is straightforward. The system components are illustrated below. For full installation details please refer to the Installation Manual or contact the Technical Team.
COMPONENTS
TAPES
1
6 7 8 9 10
2 3 5
AC 412 A/4Internal Profile
AC 422 A/4Internal profile(thermally broken)
AC 401 E50Purlin Clip (50mm)
PST CF 1040Marlon Clickfix Panel
AC 415 BLinear Bracket
4
AC 414 ‘P’ Plate Gasket
AC 416 B/GLinear Sealing Bracket
AC 401 E50Purlin Clip
AC 416 B/GLinear Sealing Bracket
Pre-fabricated corner section
AC 421 A 90° Internal Corner
AC 420 ‘E’ Gasket
AC 419Alignment Bracket
AC 424 A90° Internal Corner(thermally broken)
AC 413 A/2/DExternal Profile with drainage holes
AC 413 A/2 External Profile
AC 407 EVentilating Tape
AC 406 ESealing Tape
5648-06-19.
SPANNING
Single spanning based on deflection limit span/40. Standard Clip
Single Span
Double Span
Multi-span
Global Sales Brett Martin Plastic Sheets24 Roughfort Road,Mallusk, Co. AntrimNorthern Ireland BT36 4RB
For the latest information visit the company’s web site:
www.marlonclickfix.com
All reasonable care has been taken in the compilation of the information contained within this literature. All recommendations on the use of our products are made without guarantee, as conditions of use are beyond the control of Brett Martin. It is the customer’s responsibility to ensure that the product is fit for its intended purpose and that the actual conditions of use are suitable. Brett Martin pursues a policy of continuous product development and reserves the right to amend specifications without prior notice.
Comprehensive sales and technical literature is available for each product range.
0.00
500 1000 1500 2000
Load (N/m2)
Span
(m
)
2500 3000
0.50
1.00
1.50
2.00
2.50
3.00
Panel Structure 10 wall
Panel Thickness 40mm ±0.5mm
Modular Width (nominal) 500
Overall Width (nominal) 526
Panel Length ≤ 5m -0 +10mm
> 5m -0 +25mm
U-Value 0.99 W/m²K
Light Transmission Clear (g) 52%
Pearlescent 44%
Colours Available on request
Hail Impact Diam. 20mm v ≥21m/sec
Temperature Resistance -40 up to +100
Linear Thermal Expansion 6.8 x 10-5m/m°C
Recommended Minimum Pitch 10°
Fire Class B-s1, d0 to EN13501-1
Non-Fragility Class B non-fragile to ACR[M]001 at 1200mm purlin centres
PROPERTIES
COLOUR LT SHGC SC
Clear (g)* 52% 0.42 0.48
Pearlescent 44% 0.28 0.032
Special colours and colour matching available on request. Minimum order quantities apply.
