Facility Implants Placement Techniques

Surgical Kit

1a Drill: Starter

To pass trough the cortical

1a Drill: Twister 2.0

Osteotomy deep in accordance with the implants length

14

12

10

For flapless surgeries, use the above mark as reference (2mm above)

Osteotomy in accordance with the planed implant length

Drill sequence in accordance with the planed implant length.

Osteotomy

1st Bone Level mark

2nd Gingival level mark

Attention: 2nd mark 2mm above, for flapless surgery.

Radiographic positioner

Osteotomy deep probe using the Radiographic

Bone tap, for bones I and II

Use 30RPM e 30N.cm is recommended to use the bone tap.

Spiral development according to the planed implant legth.

Facility Implant 12mm

Facility Implant 12mm

Contra-Angle Facility Connection

Implants capture directly from the package.

Implant placement with Contra-angle Facility connection.

Use 30RPM e 35N.cm is recommended to place the implant with the contra-Angle.

If is needed, use the Torque Ratchet to place the implant.

Placed Implant

Available Prosthetic Components

•Anatomic Post 1,5; 2,5 and 3,5 high

• Micro Abutment 1,5; 2,5 and 3,5 high

• Attachment Ball 1,5; 2,5 and 3,5 high

The components do not have spirals. To fix the abutments is required to tap it over the implant.

Anatomic Post placed

THANK YOU!