Installation Instructions
860648837 Rev A
TC-40163-IP-EN Rev. A March 2019
Visit our website or contact your local CommScope ® representative for more information. www.commscope.comAll trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc. © 2019 CommScope, Inc. All Rights ReservedThis product may be covered by one or more U.S. patents or their foreign equivalents. For patents, see www.cs-pat.comFor technical assistance, customer service, or to report any missing/damaged parts, visit us at: http://www.commscope.com/SupportCenter
For optimal jumper management and ease of installation, color code labels can be placed on the side of the FACT-trumpets. The color coding will work in combination with the FACT FRAME color label on the frame backside and on the frame drums.
1. Select the color code based on the color selection table. Color selection is defined by the mounting position in the frame.
2. Place the color code label on the side of the trumpet on the FACT- element.
3. Check correct label placement: colors on FACT trumpets should match the color coding on the frame back plate.
Numbering labels can be placed on the frontside of FACT-elements. Location and sequence can be defined by the customer.
8 FACT-elementscolor coded “A”
8 FACT-elementscolor coded “B”
8 FACT-elementscolor coded “D”
8 FACT-elementscolor coded “E”
8 FACT-elementscolor coded “F”
8 FACT-elementscolor coded “G”
8 FACT-elementscolor coded “C”
color selection table
Color Code Labels:
Page 1 of 2
FACT Trumpet Color Coding - FACT FRAME
a1
a1 a7
a2
a3
a4
a5
a6
a7
to
Numbering Labels: b1
Installation Instructions
860648837 Rev A
TC-40163-IP-EN Rev. A March 2019
Visit our website or contact your local CommScope ® representative for more information. www.commscope.comAll trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc. © 2019 CommScope, Inc. All Rights ReservedThis product may be covered by one or more U.S. patents or their foreign equivalents. For patents, see www.cs-pat.comFor technical assistance, customer service, or to report any missing/damaged parts, visit us at: http://www.commscope.com/SupportCenter
For optimal jumper management and ease of installation, color code labels can be placed on the side of the FACT-trum-pets. The color coding will work in com-bination with the FIST-GR3 color label on the frame back plate and on the frame drums.
1. Select the color code based on the color selection table. Color selection is defined by the mounting position in the frame.
2. Place the color code label on the side of the trumpet on the FACT- element.
3. Check correct label placement: colors on FACT trumpets should match the color coding on the frame back plate.
8 FACT-elementscolor coded with red
8 FACT-elementscolor coded with blue
8 FACT-elementscolor coded with green
8 FACT-elementscolor coded with black
8 FACT-elementscolor coded with orange
8 FACT-elementscolor coded with purple
8 FACT-elementscolor coded with yellow
color selection table
Page 2 of 2
FACT Trumpet Color Coding - FIST GR3
a8
a9
a10
a11
a12
a13
a14
Color Code Labels: a8 a14to