Date post: | 15-Apr-2017 |
Category: |
Services |
Upload: | fairmate-construction-chemicals |
View: | 25 times |
Download: | 4 times |
FAIRMATE GEOCELWATERGUARD SELF ADHESIVE FLASHING TAPE
FAIRMATE GEOCELWATERGUARD SELF ADHESIVE FLASHING TAPE
May 3, 2023
Benefits Instant waterproof seal, even in damp conditions. Quick and easy to apply, no specialist tools required. 4 layers or protection: lacquer foil, membrane and bitumen adhesive. Superior temperature resistance from -10°C to +100°C Easily moulds to
contours. Long lasting protection, at least 15 years. Available in a wide range of sizes.
May 3, 2023
Description
FAIRMATE GEOCEL WATERGUARD SELF ADHESIVE FLASHING
TAPE can be used for general flashing applications, sealing glazing bars,
sealing leaks in gutters, valleys, down pipes, capping, and various
corrugated and flat roofs. Also suitable for sealing roof lights and repairs to
cracked glass.
May 3, 2023
Application Instructions
Surface Preparation : All surfaces must be smooth, clean, dry and dust free. Any
loose matter must be removed with a wire brush. Porous or rough surfaces should
be primed using Bitumen Primer, which should be allowed to dry before applying
FAIRMATE GEOCEL WATERGUARD SELF ADHESIVE FLASHING TAPE.
Application : Cut tape to the required length, remove the release film and press
down the adhesive bitumen to the previously prepared surface. Ensure full contact
by smoothing down with a cloth by taking care to eliminate air bubbles. Final rolling
down of the edges should with a wallpaper roller which ensure a good edge seal. All
overlaps should be a minimum of 25mm and well rolled down.
May 3, 2023
Packing
FAIRMATE GEOCEL WATERGUARD SELF ADHESIVE
FLASHING TAPE is available in the following lengths :
10m x 75mm, 10m x 100mm, 10m x 150mm, 10m x 225mm,
10m x 300mm, 10m x 450mm, 3m x 100mm, 3m x 150mm,
3m x 225mm
May 3, 2023