1

FASTENER GUIDE

Assembly Screws 4-6

Drywall Screws 6

Pocket Hole/Face Frame Screws 7

Face Frame Screws 7

Installation Screws 8

Drawer Front Adjusting Screws 8

Hardware Screws 9

Machine Screws 10

Euro Screws 10

Washers 10

Draw Bolts 10

Anchors 10

Connecting Screws 11

Closet Hardware 11

Insert Bits and Set 12

Bit Holders 13

Screwdrivers 13

Staples 14

Nails, Brads and Pins 14-15

Index

3

Drives

AWPatented drive system which eliminates spin/cam out

PhillipsMost common drive for wood applications

Robertson®

Square DriveImproves engagement and reduces spin/cam out

Recex® ComboSquare/Phillips combo drive provides high torque and reduces spin/cam out

Pozi Provides higher torque in hand driving operations

Phillips/Slotted Primarily found in truss head machine screws

Heads

Threads

Fastener Guide

Flat Flat with Nibs

PanFillister Round Washer

Low Profile Round

Washer

TrussModified Truss

Bugle Trim Undercut

Points

Standard Type 17 Drill Needle Blunt ASSY ASSY Plus Drill

ASSY® PLUS patented Asymmetrical/Symmetrical plus a drill bit cutter head for clean, fast, non-splitting drive into all woods and near edges

Fine for general woodworking use primarily with hardwood - requires pre-drilling and pre-countersinking

Coarse for soft wood, MDF and particle board - best results require pre-drilling and countersinking

HI-LO multi-purpose thread designed for greater holding and less strip-out in all woods

Turbo serrated thread outperforms Type 17 fasteners, reduces splitting - virtually eliminates pre-drilling/countersinking

Twinfast twin lead screw primarily used in hardwoods

Machine Screws M4/8-32 for attaching decorative hardware

ASSY® patented Asymmetrical/Symmetrical thread geometry and 30˚ point locates screw precisely, drives fast, with 40% higher torque than ordinary screws

4

ASSY

• Better torque transfer due to the surface contact points• Combined cylindrical and conical shape prevents cam-out • Longer bit life • Flat head, coarse thread, AW drive • For particleboard, MDF, solid wood• Thin shank and nibbed head reduce splitting

size box qty zinc #6 x ” 1,000 017043516#6 x ” 1,000 01513520#8 x ½” 1,000 1513513#8 x 1” 1,000 1511425#8 x 1 ” 500 1511430#8 x 1 ” 500 1511435#8 x 1 ” 500 1511440#8 x 1¾” 500 1511445#8 x 2” 500 1511450#8 x 2 ” 250 1511460

ASSY 3.0 Plus

• Pre-drills and self-countersinks in solid wood without splitting • Flat head, coarse thread, AW drive • Drill tip, thin shank and nibbed head make this screw

particularly well suited for MDF, particleboard or solid wood • Nibs also allow easy, clean countersinking

size box qty zinc stainless steel #8 x ” 500 — 016614560#8 x ” 500 — 016614540#8 x 1” 1,000 0165914025 —#8 x 1 ” 500 0165914030 —#8 x 1 ” 500 0165914035 —#8 x 1 ” 500 0165914040 —#8 x 1¾” 500 0165914045 —#8 x 2” 500 0165914050 016614550#8 x 2 ” 250 0165914060 —#8 x 2¾” 200 0165914070 016614570#9 x 3 ” 200 0165914580 016614580

size box qty zinc #8 x 1” 1,000 017014025#8 x 1 ” 500 017014030#8 x 1 ” 500 017014035#8 x 1 ” 500 017014040#8 x 1¾” 500 017014045#8 x 2” 500 017014050#8 x 2 ” 250 017014060#8 x 2¾” 200 017014070

ASSY Ecofast

• Flat head, coarse thread, AW drive screws with nibs • For particleboard, MDF and melamine • Nibs allow easy, clean counter-sinking into composite

materials • Thin shank and nibbed head reduce splitting

Flat Head#2 Recex® Combo DriveNibs and Type 17 PointCoarse Thread

size box qty black zinc

#8 x 1” 1,000 WW36710 WW3682011,000 WW36715 —

#8 x 1¼” 1,000 WW36720 WW368229,000 WW36725 WW36830

#8 x 1½” 1,000 WW36730 WW368357,000 WW36735 WW36840

#8 x 1¾”1,000 WW36750 —4,800 WW36755 —

#8 x 2” 1,000 WW36760 WW368704,000 WW36765 WW36875

#8 x 2¼”1,000 WW36770 —3,500 WW36775 WW36885

#8 x 2½”1,000 WW36780 WW368902,500 WW36785 WW36895

#8 x 3”1,000 WW36790 —2,000 WW36793 WW36910

Assembly Screws

5

size box qty lube#8 x ¾“ 15,000 WW31950

#8 x 1“ 1,000 WW3200010,000 WW32100

#8 x 1 ” 1,000 WW322008,000 WW32300

#8 x 1¼” 1,000 WW324007,500 WW32500

#8 x 1 ” 1,000 WW326005,000 WW32700

#8 x 1½” 1,000 WW328005,000 WW32900

#8 x 1¾“ 1,000 WW330004,000 WW33100

#8 x 2“1,000 WW332003,500 WW33300

#8 x 2¼” 1,000 WW334003,000 WW33500

#8 x 2½“ 1,000 WW336002,500 WW33700

#8 x 2¾” 1,000 WW338002,000 WW33900

#8 x 3“1,000 WW340001,500 WW34100

Flat Head#2 Recex® Combo DriveNibsTurbo Thread

size box qty black#8 x ¾“ 1,000 WW30605#8 x 1“ 1,000 WW30615

#8 x 1¼“ 1,000 WW306259,000 WW30630

#8 x 1½“ 1,000 WW306357,000 WW30640

#8 x 1¾“ 1,000 WW306454,000 WW30650

#8 x 2“1,000 WW306553,000 WW30660

#8 x 2½“ 1,000 WW306652,800 WW30670

#8 x 3”1,000 WW306752,000 WW30680

Flat Head#2 Robertson® Square DriveCoarse Thread

Flat Head#2 Robertson® Square DriveNibs and Type 17 PointCoarse Thread

size box qty black zinc

#8 x 1“ 1,000 WW37100 WW3160011,000 WW37120 WW31700

#8 x 1¼” 1,000 WW37140 WW318009,000 WW37160 WW31900

#8 x 1½” 1,000 WW37180 WW388007,000 WW37200 WW38900

#8 x 1 ”1,000 WW37220 WW390005,500 WW37240 WW39100

#8 x 1¾”1,000 WW37260 WW391104,800 WW37265 WW39120

#8 x 2”1,000 WW37280 WW392004,000 WW37300 WW39300

#8 x 2¼” 1,000 WW37305 WW394003,500 WW37310 WW39500

#8 x 2½” 1,000 WW37340 WW397102,500 WW37350 WW39715

#8 x 3”1,000 WW37380 WW398002,000 WW37390 WW39900

Flat Head#2 Phillips DriveCoarse Thread

size box qty black#8 x 1 1,000 WW38340

#8 x 1¼”1,000 WW383509,000 WW38355

#8 x 1½” 1,000 WW383607,000 WW38365

#8 x 1 ” 5,500 WW38375#8 x 1¾” 4,000 WW38385

#8 x 2”1,000 WW383904,000 WW38395

#8 x 2½” 1,000 WW384102,500 WW38415

#8 x 3”1,000 WW384252,000 WW38430

Assembly Screws

6

size box qty black#8 x 1” 11,000 WW30912

#8 x 1¼” 1,000 WW309159,000 WW30920

#8 x 1½” 1,000 WW309257,000 WW30930

#8 x 1¾” 4,800 WW30940

#8 x 2”1,000 WW309553,500 WW30960

#8 x 2¼” 3,000 WW30970#8 x 2½” 2,800 WW30980#8 x 3” 2,000 WW30985#10 x 3”* 1,500 WW30990

Flat Head #2/#3* Phillips Drive Twinfast Thread

size box qty black

#6 x 1 ”100 WW240001,000 WW24010

#6 x 2¼” 100 WW241001,000 WW24120

#8 x 3“ 100 WW24200

Trim Head#2 Robertson® Square DriveFine Thread (Type A)

size box qty zinc #8 x 2½” 2,000 WW39770#8 x 3” 1,500 WW39785#10 x 3” 500 WW39370

Round Washer Head#2 Recex® Combo DriveCoarse Thread

Assembly Screws, Drywall Screws

size box qty black

#7 x 1”1,000 WW2200011,000 WW22100

#7 x 1 ”1,000 WW223005,500 WW22400

#8 x 2½”

1,000 WW226003,000 WW22700

#9 x 2½” 1,000 WW229002,000 WW23000

#9 x 3” 1,000 WW232002,000 WW23300

Bugle Head#2 Robertson® Square DriveCoarse Thread

size box qty black

#7 x 1”1,000 WW1900010,000 WW19010

#7 x 1 ” 1,000 WW1910010,000 WW19110

#7 x 1¼”1,000 WW192008,000 WW19210

#7 x 1½”1,000 WW204006,000 WW20500

#7 x 1 ”1,000 WW193005,000 WW19310

#7 x 2”1,000 WW194003,500 WW19410

#7 x 2¼”1,000 WW195003,000 WW19510

#8 x 2½” 1,000 WW210002,500 WW21100

#8 x 3” 1,000 WW213002,000 WW21400

Bugle Head#2 Phillips DriveCoarse Thread

size box qty black zinc

#8 x 1”1,000 WW34200 WW3000011,000 WW34220 WW30100

#8 x 1¼” 1,000 WW34240 WW302009,000 WW34260 WW30300

#8 x 1½” 1,000 WW34280 WW304007,000 WW34300 WW30500

#8 x 1 ”1,000 WW34320 WW306005,500 WW34340 WW30700

#8 x 1¾” 1,000 WW34350 WW307954,800 WW34360 WW30798

#8 x 2”1,000 WW34400 WW308004,000 WW34420 WW30900

#8 x 2¼” 1,000 WW34440 WW310003,500 WW34460 WW31100

#8 x 2½” 1,000 WW34480 WW312002,500 WW34500 WW31300

#8 x 3”1,000 WW34560 WW314002,000 WW34580 WW31500

Flat Head#2 Phillips DriveNibs and Type 17 PointCoarse Thread

7

Pocket Hole/Face Frame ScrewsASSY Face Frame

• Half the work —twice the strength• Modified pan head• ASSY® double thread pitch• Case hardened, zinc-plated• AW20 drive bit included

size box qty zinc #6 x 1¼” 1,000 015303530#6 x 1 ” 1,000 015303535#6 x 1½” 500 015303540

size box qty lube

#7 x 1¼” 1,000 WW150007,500 WW15100

#7 x 1½” 1,000 WW152006,000 WW15300

Fillister Head #2 Robertson® Square DriveType 17 PointHI-LO Thread

Fillister Head #2 Robertson® Square DriveExtra Long Type 17 PointCoarse Thread

size box qty lube

#7 x 1¼” 1,000 WW170007,500 WW17100

#7 x 1½” 1,000 WW172006,000 WW17300

size box qty lube

#7 x 1¼” 1,000 WW160007,500 WW16100

#7 x 1½” 1,000 WW162006,000 WW16300

Fillister Head #2 Robertson® Square DriveType 17 PointFine Thread

Pan Head#2 Robertson® Square DriveType 17 PointFine Thread

size box qty black

#6 x 1” 1,000 WW1235510,000 WW12350

#6 x 1¼” 1,000 WW1250010,000 WW12520

#6 x 1½” 1,000 WW128008,500 WW12820

size box qty black

#6 x 1¼” 1,000 WW1020010,000 WW18000

#6 x 1½” 1,000 WW105008,500 WW18200

Pan Head#2 Phillips DriveType 17 PointFine Thread

Pan Head#2 Robertson® Square DriveType 17 Point Coarse Thread

size box qty black

#7 x 1¼” 1,000 WW120007,500 WW12100

#7 x 1” 1,000 WW1150010,000 WW11505

#7 x 1½” 1,000 WW122006,000 WW12300

size box qty black

#7 x 1¼” 1,000 WW392478,000 WW39248

Round Washer Head#2 Robertson® Square DriveType 17 PointFine Thread

size box qty black

#8 x 1” 1,000 WW1830010,000 WW18305

#8 x 1¼” 1,000 WW185007,000 WW18520

#8 x 1½” 1,000 WW186005,000 WW18620

Round Washer Head#2 Recex Combo DriveType 17 PointCoarse Thread

size box qty lube

#8 x 1½” 1,000 WW392457,000 WW38910

Round Washer Head#2 Robertson® Square DriveType 17 PointCoarse Thread

8

Installation Screws, Drawer Front Adjusting ScrewsJAMO Installation Screws

• Flat head, coarse thread• AW drive with nibs and barbs • Adjustable distance mounting screws • No need for shims• No pre-drilling is required• Nibs allow easy, clean counter sinking

of 1/16” into mounting piece

size box qty zinc #13 x 2 ¾” 100 23446270#13 x 3 ” 100 23446280

Painted Round Washer Head#3 Recex® Combo DriveType 17 PointCoarse Thread

size box qty white#10 x 2½” 1,500 WW39320#10 x 3” 1,000 WW39335

3” Lag boltWS Type

diameter box qty zinc ” 100 WW37000

Painted Truss Head#3 Phillips DriveDrill PointFine Thread

size box qty white zinc #10 x 2½” 500 WW39180 WW39190#10 x 2½” 2,000 — WW39185

Painted Truss Head#2 Phillips DriveNeedle PointFine Thread

size box qty sand white zinc #8 x 2½” 2,000 WW39150 WW39140 WW39160

Painted Truss Head#3 Phillips DriveCoarse Thread

size box qty sand white zinc

#10 x 2½” 500 WW37020 — —1,500 — WW37015 —2,000 — — WW37045

#10 x 3” 500 WW37060 — WW370751,500 WW37065 WW37055 —

Modified Truss Head#2 Recex® Combo DriveType 17 PointCoarse Thread• ½” OD Washer

size box qty zinc

#8 x 1” 1,000 WW812007,000 WW81300

#8 x 1 ”1,000 WW815006,500 WW81600

#8 x1¼”1,000 WW818006,500 WW81900

Modified Truss Head#2 Phillips DriveType 17 PointCoarse Thread• ½” OD Washer

size box qty zinc #8 x ” 1,000 WW80000#8 x 1” 1,000 WW80330#8 x 1 ” 1,000 WW80450#8 x 1¼” 1,000 WW80750

9

Hardware ScrewsFlat Head#2 Phillips DriveCoarse Thread

size box qty black#8 x ¾” 1,000 WW38330

size box qty nickel zinc

#6 x ½” 1,000 WW54200 WW421005,000 WW54300 WW42150

#6 x ”1,000 WW54375 WW423005,000 WW54380 WW4239030,000 WW54400 WW42400

#6 x ¾” 1,000 WW54680 WW425005,000 WW54690 WW4315024,000 WW54700 —

#6 x 1” 1,000 WW54900 WW38120#6 x 1¼” 1,000 — WW38125#7 x ” 1,000 WW46800 —

#7 x ¾”1,000 WW43700 —5,000 WW43750 —

#8 x ¾” 15,000 — WW38165#8 x 1” 1,000 — WW38470

Flat Head, #2 Phillips Drive, Coarse Thread

Flat Head#2 Phillips Drive Type 17 PointCoarse Thread

size box qty zinc #6 x ½” 1,000 WW54360

#6 x ”1,000 WW430005,000 WW43020

#6 x ¾” 1,000 WW431005,000 WW54765

#8 x ” 1,000 WW38435#8 x ¾” 1,000 WW38445

Flat Head#1 Robertson® Square DriveType 17 PointCoarse Thread

size box qty zinc #6 x ” 1,000 WW30320

Pan Head, #2/*#3 Phillips Drive , Type 17 Point, Coarse Thread

size box qty nickel zinc #6 x ½” 1,000 — WW45230#6 x ” 1,000 — WW45340#8 x ” 1,000 — WW45560#8 x ¾” 1,000 — WW46500#10 x ”* 1,000 WW45630 —#10 x ¾ ”* 1,000 WW45820 —Round Washer Head

#2 Recex® Combo DriveType 17 PointCoarse Thread

size box qty zinc

#8 x ¾”1,000 WW5550010,000 WW55550

Modified Truss Head#2 Phillips DriveCoarse Thread

size box qty zinc #8 x ½” 1,000 WW46750

Truss Head#2 Phillips DriveType 17 PointCoarse Thread

size box qty zinc

#8 x ”1,000 WW5812010,000 WW58130

#8 x ¾” 1,000 WW5814010,000 WW58150

Undercut Head, #2 Phillips Drive, Coarse Thread

size box qty antique brass brite brass zinc

#6 x ½” 1,000 — — WW43250#6 x ” 1,000 WW43350 WW43300 WW43420

Flat Head, #2 Phillips Drive/*#1 Phillips Drive, Standard Thread

size box qty antique brass

brite brass bronze zinc

#4 x ½”* 1,000 — WW40100 — WW40000#4 x ”* 1,000 WW40190 — — WW40180#5 x ½” 1,000 WW40300 WW40400 — WW40200#5 x ” 1,000 WW40600 WW40700 WW40800 WW40500#6 x ½” 1,000 WW41000 WW41170 — WW41100#6 x ” 1,000 WW41300 WW41350 — WW41900

Truss Head, #2 Phillips Drive, Coarse Thread

size box qty black white zinc #8 x ” 1,000 WW46100 WW46200 WW46000

10

Machine Screws, Euro Screws, Draw Bolts, Anchors

size box qty zinc 8-32 x ½” 1,000 WW47120

8-32 x ¾”100 WW471001,000 WW47130

8-32 x ” 1,000 WW46950

8-32 x ”100 WW472001,000 WW47220

8-32 x 1”100 WW473001,000 WW47320

8-32 x 1 ” 100 WW474001,000 WW47420

8-32 x 1¼” 100 WW475001,000 WW47520

8-32 x 1 ” 100 WW476001,000 WW47620

8-32 x 1½” 100 WW477001,000 WW47720

8-32 x 1 ”100 WW478001,000 WW47820

8-32 x 1¾” 100 WW479001,000 WW47920

8-32 x 2” 100 WW480001,000 WW48020

Truss HeadPhillips/Slotted Drive8-32 Thread

Truss HeadPhillips/Slotted DriveM4 Thread

size box qty zinc M4 x 22mm 100 WW48340M4 x 25mm 100 WW48400M4 x 30mm 100 WW48450M4 x 35mm 100 WW48500M4 x 38mm 100 WW48550M4 x 39mm 100 WW48600M4 x 40mm 100 WW48620M4 x 45mm 100 WW48640M4 x 50mm 100 WW48660

Truss Head#2 Phillips/Slotted Drive8-32 Breakaway Thread

size box qty zinc

8-32 x 1¾” 100 WW487001,000 WW48720

M4 x 45mm100 WW489001,000 WW48920

Drywall Anchors

• Patented drive allows setting of the plug with a Phillips bit, AW bit or Torx bit

• Anti-rotation feature

finish item nylon 0903251 metal 0903252

Hex Draw Bolts

• Designed for countertop installations• Zinc Finish

length thread box qty item 3½” ¼” -20 100 WW496003½” ¼” -20 500 WW497004” ¼” -20 350 WW49610

Finish Cup Washers

• No. 8 for #6 and #7 head screws• No. 10 for #8 and #9 head screws

size box qty nickel black#6 1,000 WW49025 WW49000#8 100 WW49100 —#8 1,000 WW49125 WW49175#10 100 WW49300 —#10 1,000 WW49400 WW49325#12 100 WW49200 —

Flat HeadPOZI Drive

size box qty nickel5 x 7.5mm 1,000 WW599205 x 10mm 1,000 WW600005 x 11.5mm 1,000 WW601005 x 13mm 1,000 WW602005 x 14.5mm 1,000 WW60300

5 x 20mm100 WW604001,000 WW60420

5 x 25mm100 WW605001,000 WW60520

5 x 30mm 100 WW60600

11

Connecting Screws, Closet HardwareFlat HeadPOZI Drive with HoleBlunt Point

size box qty zinc 7 x 50mm 2,000 WW70440

size box qty zinc 7 x 50mm 2,500 WW70460

Flat Head POZI Drive with HoleNibsSharp Point

description finish item no.suspension rail steel GR499831001719

rail coveralmond GR499831000153brown GR499831000158white GR499831000174

Suspension Rails and Covers

• Unique hole pattern allows installer to quickly locate studs

• Self-centering suspension• 8’ lengths

description size finish item no.

non-outrigger cam drop-on

16mm

almond 6383ALblack 6383BLbrown 6383BRwhite 6383WH

19mm

almond 6387ALblack 6387BLbrown 6387BRwhite 6387WH

outriggercam drop-on

16mm

almond 6439ALblack 6439BLbrown 6439BRwhite 6439WH

19mm

almond 6441ALblack 6441BLbrown 6441BRwhite 6441WH

RTA Fittings

• ‘Klix’ locking feature provides a strong vibration-proof connection• Compatible with all screw-in and Quickfit-6 dowels

size finish item no.16mm zinc 6414ZN19mm zinc 6416ZN

Double Ended Dowels

• Suitable for applications with all Titus Ø20mm and/or Ø25mm Expando-6 housings

• ‘Klix’ locking feature provides a strong, vibration-proof connection

description finish item no.suspension bracket LEFT steel GR499825401115suspension bracket RIGHT steel GR499825401215

cover cap LEFT

white GRF155145038133 almond GRF155145062133 brown GRF155145060133 black GRF155145061133

cover cap RIGHT

white GRF155145039133 almond GRF155145066133 brown GRF155145064133 black GRF155145065133

Suspension Brackets and Covers

• All metal brackets• Plastic cover caps available as shown• 286 lbs. carrying capacity per wall

cabinet

12

Phillips Drive Insert Bit size item #1 0614176274#2 0614176461#3 0614176648

Phillips Power Drivers size item1 x 1” WW921102 x 1” WW922102 x 2¾” WW922302 x 4½” WW922452 x 6” WW922603 x 2” WW92320

Combination Power Drivers

• Phillips/Robertson® square drive

size item#2 x 2½” WW94225

Square Power Drivers

• #2 Robertson® square drive

size item#2 x 1” WW93210#2 x 2” WW93220#2 x 2 ¾” WW93245#2 x 4½” WW93245#2 x 6” WW93260

size item#3 x 1” WW90310#3 x 2” WW90320#3 x 3” WW90330#3 x 4” WW90340#3 x 6” WW90360

Square Power Drivers

• #3 Robertson® square drive• Hardened tip

size item#2 x 2½” WW93225#2 x 3½” WW93235#2 x 2½” WW92225#2 x 3½” WW92235

Double Power Drivers

• No. 2 Recess both ends• Robertson Square Drive

Pozi Drive Insert Bitssize item1 x 1” WW951102 x 1” WW952102 x 2” WW952203 x 1” WW95310

POZI Drive Insert Bit size item #1-25mm 0614176651#2-25mm 0614176652#3-25mm 0614176653

TORX Drive Insert Bitsize item T x 25 06145225T x 30 06143130T x 40 06145140

drive length itemAW10 1” (25mm) 06145210AW20 1” (25mm) 06145220AW25 1” (25mm) 06145225AW30 1” (25mm) 06145230AW40 1” (25mm) 06145240

AW Drive Insert Bits

AW Drive Bit Set and Bit Holder

description item 11 pieces 061425040

Insert Bits and Sets

13

Quick Change Bit Holder • Quick-change mechanism provides a firm connection between the holder and the bit• Only a slight forward motion of the locking sleeve is needed to unlock the bit for a quick change

description length item magnetic 3” 614176708non-magnetic 2” 614176711for double end bits 2¼” WW99010

Magnetic Bit Holder

• High energy magnet alleviates the problem of lost bits• 3” overall length

description item for ¼” insert bits 614176702for 1” long insert bits WW99005

drive item Slotted 0613321045Phillips #2 061323202AW20 061343720

Wurth Zebra Screwdrivers

• Ergonomically shaped handle• Nickel plated shaft for corrosion protection

drive item Phillips #2 06132522Slotted 0613251065

Wurth Zebra Mini Screwdrivers

• Ergonomically shaped handle• Nickel plated shaft for corrosion protection

Robertson® Square Drive Screwdrivers

size recess size/type item#1 x 3” #1 Robertson® WW99130#1 x 7½” #1 Robertson® WW99180#1 x 10” #1 Robertson® WW99110#2 x 3” #2 Robertson® WW99230#2 x 7½” #2 Robertson® WW99275#2 x 10” #2 Robertson® WW99210#3 x 7½” #3 Robertson® WW99375#3 x 10” #3 Robertson® WW99310

item 0614250500

Insert Bit Set

• 90 Pieces

Bit Holders, Screwdrivers

14

crown length box qty item

”

¾” 5,000 S18075N” 5,000 S18088N

1” 5,000 S18100N1 ” 5,000 S18113N1 ” 5,000 S18119N1¼” 5,000 S18125N

¼”

½” 5,000 S18050KT” 5,000 S18063KT

¾” 5,000 S18075KT” 5,000 S18088KT

1” 5,000 S18100KT1 ” 5,000 S18113KT1¼” 5,000 S18125KT1½” 5,000 S18150KT

”

½” 5,000 S18050M” 5,000 S18063M

¾” 5,000 S18075M1” 5,000 S18100M

18 Gauge Staples

Fits Tools: Würth 703555, 7035551; Porter Cable NS150A, NS100; Senco FinishPro 2N1, LN4450, KMN4450, SLS25XP, SLS20L, SLS15L, SLS18L, SLS18NR, SKS-L; Fasco F21P 90-25A, F21T 90-40A, F3C 90-40CT and similar models

crown length box qty item

”

1” 10,000 S16100L1¼” 10,000 S16125L1½” 10,000 S16150L1¾” 10,000 S16175L2” 10,000 S16200L

16 Gauge Staples

Fits Tools: Senco SKS-N, SNS41, SNS50, SNS45, SNS40, M2, M1; Porter Cable MS200 ; Hitachi 5008 Series; Duo-Fast DS and MS7664; Fasco F45C G-55 SS, F3C, G-40 CT and similar models

length box qty item ½” 5,000 N18050A

” 5,000 N18063A¾” 5,000 N18075A1” 5,000 N18100A1 ” 5,000 N18113A1 ” 5,000 N18119A1¼” 5,000 N18125A1½” 5,000 N18150A1 ” 5,000 N18156A1¾” 5,000 N18175A2” 5,000 N18200A

Finish Nails, 18 Gauge

Fits Tools: Würth 703546; Senco FinishPro 25XP, FinishPro18, FinishPro15, FinishPro 2N1, AF25, SLP20, Any Senco AX tool; Porter Cable BN125A, BN200A ; Bostitch BT125K-2, BT200K-2, SB-1850BN Fasco F21P GN-31A, F21T GN-40A and similar models

Finish Nails, 16 Gauge

Fits Tools: Würth 703545 ; Senco: FP32; Porter Cable: FN250B, CFN250B; Bostitch: FN16550K-2, SB-1664FN; Fasco: F3T FN-70 CT and similar models

length box qty item ¾” 5,000 N16075D1” 5,000 N16100D1¼” 5,000 N16125D1½” 5,000 N16150D1¾” 5,000 N16175D2” 5,000 N16200D2½” 5,000 N16250D

Staples and Nails

15

Micro Brads, 23 Gauge

Fits Tools: Würth 11191F

length box qty item ” 10,000 N23088B

1” 10,000 N23100B1 ” 10,000 N23119B1 ” 10,000 N23138B

Headless Micro Pins, 23 Gauge

Fits Tools: Würth 11191F; Porter Cable PIN100; Senco FinishPro10, SHP10; Fasco F1B A64-12/18 and similar models.

length box qty item ½” 10,000 N23050F10

” 10,000 N23058F10¾” 10,000 N23075F101” 10,000 N23100F10

Slight Head Brad Nails, 18 Gauge

Fits Tools: Würth 703546; Same as Brad Nails 18 Gauge

length box qty item ” 5,000 N18063B

¾” 5,000 N18075B1” 5,000 N18100B

Angled Finish Nails, 15 Gauge

Fits Tools: Senco FinishPro 41XP; Air Free 41XP; FinishPro 35, SFN2B, SFN30, SFN40, SNI; Porter Cable DA250B and similar models

length box qty item 1” 4,000 N15100E1¼” 4,000 N15125E1½” 4,000 N15150E1¾” 4,000 N15175E2” 4,000 N15200E2¼” 4,000 N15225E2½” 4,000 N15250E

Nails, Brads and Pins

16

ATLANTA GA5075 North Buford Hwy

Suite 100Norcross, GA 30071

678.924.0386 888.924.0386

FAX 678.924.0391

CHATTANOOGA TN234 Direct Connection Drive

Rossville, GA 30741706.891.2000800.506.9663

FAX 706.891.4229

RALEIGH NC4213 Poole Road

Raleigh, NC 27610919.231.6620800.982.0999

FAX 919.231.9687

BALTIMORE MD6660 Santa Barbara Road

Elkridge, MD 21075410.796.7600800.935.6229

FAX 410.796.7729

GREENSBORO NC1819 Baker Road

High Point, NC 27263336.431.2712800.662.9060

FAX 336.431.2750

RICHMOND VA1701 Rhoadmiller Street

Richmond, VA 23320804.359.1374800.552.4046

FAX 804.353.3206

CHARLESTON SC4325 Lear Avenue

N. Charleston, SC 29418843.529.0808800.466.8499

FAX 843.529.0805

GREENVILLE SC1441 Hwy 101 South

Greer, SC 29652864.877.7328800.868.9669

FAX 864.877.7413

ROANOKE VA701 Gainsboro RoadRoanoke, VA 24016

540.344.2079800.948.7156

FAX 540.344.2306

CHARLOTTE NC4250 Golf Acres DriveCharlotte NC 28208

704.394.9479800.868.0291

FAX 704.398.2162

NORFOLK VA3307 Chesapeake Blvd

Norfolk, VA 23513757.855.3908800.277.4254

FAX 757.857.6133

TAMPA FL5102-B W. Hanna Avenue

Tampa, FL 33634 800.432.1149888.432.1149

FAX 813.887.1902

Build something great www.wurthwoodgroup.com1 877 GO WURTH

FG 5.12