Date post: | 20-Jan-2015 |
Category: |
Technology |
Upload: | abrish-gebru |
View: | 1,705 times |
Download: | 33 times |
2-1 2-1 Fasteners and FasteningFasteners and Fastening2-22-2 Threaded FastenersThreaded Fasteners2-32-3 Screw and Screw Thread Screw and Screw Thread 2-42-4 Screw Thread TerminologyScrew Thread Terminology2-52-5 Basic Profiles of Screw ThreadsBasic Profiles of Screw Threads2-62-6 Types of V-threadsTypes of V-threads2-72-7 Profile of Square Thread and its Profile of Square Thread and its modificationsmodifications2-82-8 Right-Hand and Left-Hand ThreadsRight-Hand and Left-Hand Threads2-92-9 Single-start and Multi-start ThreadsSingle-start and Multi-start Threads2-102-10 Bolts and NutsBolts and Nuts2-112-11 Chamfering of Bolts and NutsChamfering of Bolts and Nuts2-122-12 Washer facing of the hexagonal bolts and Washer facing of the hexagonal bolts and nutsnuts2-132-13 Counter-sinking of the nutCounter-sinking of the nut2-142-14 Method of drawing hexagonal head bolt Method of drawing hexagonal head bolt and nutand nut2-152-15 Method of drawing a square head bolt and Method of drawing a square head bolt and nutnut
CH-8
LE
C 33
Slide
3
A mechanical element which holds two or more parts of a
machine or a structure is known as fastener. The process is
called fastening.
Permanent fastening: it involves destruction during
separation
press fits
shrink fits
rivets
welding, brazing, and soldering
adhesives
Temporary fastening: it doesn’t involve destruction
during separation
Bolts and nuts
studs and nuts
screws
keys
pins, etc…
Externally threaded fasteners
Internally threaded fasteners
CH-8
LE
C 33
Slide
6
Use:
to fasten parts together
for the relative adjustment of the adjacent parts
CH-8
LE
C 33
Slide
7
To transmit motion and
power
Lead=L=n pn = number of start
Figure 2-1Terminology of screw threads. Sharp Vee Threads shown for clarity; the crests and roots are actually flattened or rounded during the forming operation
V-thread
Square thread
CH-8
LE
C 33
Slide 10
CH-8
LE
C 33
Slide 11
Right-hand thread – A screw thread that is screwed in by rotating CW.
Left-hand thread – A screw thread that is screwed in by rotating CCW.
(a) Single (STANDARD) (b) double (c) triple threaded
2-102-10 Bolts and NutsBolts and Nuts
Bolt . Threaded fastener designed topass through holes in mating members and to be secured by tightening a nut from the end opposite the head of the bolt.
2-112-11 Chamfering of Bolts and Chamfering of Bolts and NutsNuts
2-112-11 Chamfering of Bolts and Chamfering of Bolts and NutsNuts
2-122-12 Washer facing of the hexagonal Washer facing of the hexagonal bolts and nutsbolts and nuts
The difference between a finished andUnfinished hex head bolt is a washerUnder the head of the finished bolt.
Finished vs.Unfinished Bolts:
2-132-13 Counter-sinking of the nutCounter-sinking of the nut
Countersinking of nut facilitates the gripping of the bolt end when the nut first enters while it is threaded on
2-142-14 Method of drawing Method of drawing hexagonal head bolt and nuthexagonal head bolt and nut
CH-8 LEC 33 Slide 20
2-142-14 Method of drawing Method of drawing hexagonal head bolt and nuthexagonal head bolt and nut
2-142-14 Method of drawing Method of drawing hexagonal head bolt and nuthexagonal head bolt and nut
2-142-14 Method of drawing Method of drawing hexagonal head bolt and nuthexagonal head bolt and nut
2-152-15 Method of drawing a square Method of drawing a square head bolt and nuthead bolt and nut
2-152-15 Method of drawing a square Method of drawing a square head bolt and nuthead bolt and nut
2-152-15 Method of drawing a square Method of drawing a square head bolt and nuthead bolt and nut
Conventional representati
ons of threads
2.17.Locking of nuts
2.21 Foundation bolts