Eng
lish
/ Ita
liano
LiquidsSolids
CreamsPackaging
Deep Draw ThermoformerFB 320 / FB 420FBZ 320 / FBZ 420
Automatic Deep Draw ThermoformerFB 320 / FBZ 320 FB420 / FBZ 420
High speed mechanical intermittent motion fully automatic packaging machine, balcony structure,independent servo-driven stations, stainless steel finish, PC-controlled.Designed to fit pharmaceutical-production environments, it thermoforms trays for vials, ampoules,syringes and similar products out of thermoformable films such as PVC, PET, Polystyrene (PS), PP,PLA, multilayer laminates etc.Its sturdiness, modular structure, simple operation and the easy, tool-less change over make it reliable,highly flexible, efficient and easy to service.
Main features:Independently servo-driven machine stationsMachine cycle-speed is adjustable from the main HMI, under size dedicated recipesTwo web-index grippers grant the highest precisionin pitch repeatabilityEasy, tool-less change over:index change and size-related parametersautomatically selected from HMI
Integrated Robomaster for products Pick-and-PlacePrepared for connection from/to in-lineintegrated machinesHigh-speed fully automatic positive products feeding systems are availableHigh draw depth (up to 42 mm)ZERO-WASTE version (FBZ) with quick die-cutter available(subject to the format configuration)
OptionsSeal Station (included in FBZ version)Perforating stationChillerPrintersVision/OCV systemsIntegrated synchronous connection to downstreamcartoner to deliver the finished, good packspositively and reliablyHanging slot or thumb-hole cuttersfor specially shaped blisters
FB 320 / FBZ 320 FB420 / FBZ 420Termoformatrice automatica ad alta profondità
Macchina per alte produzioni, in piano, a balcone, motorizzazione brushless indipendente per ciascunastazione, finitura acciaio inox, gestita da PC. Progettata per inserirsi in ambienti farmaceuticidi produzione, nel pieno rispetto delle norme GMP, forma cassonetti per fiale e/o flaconcini,siringhe e prodotti similari utilizzando materiali termoformabili come PVC, PET,Polistirolo (PS), PP, PLA, foglia multilamina, ecc.Robustezza, modularità, semplicità di funzionamento e facilità dei cambi formato rendono la macchinaaffidabile, flessibile, efficiente e di semplice manutenzione.
OpzioniStazione saldatura(inclusa nella versione FBZ)Stazione perforazioneRefrigeratore circuito chiusoStampanti
Caratteristiche principaliStazioni indipendenti con motorizzazione brushlessVelocità macchina regolabile da pannello,richiamando il formatoDoppio gruppo di traino a pinzegrande precisione del passoCambio formato rapido e semplice, senza l’ausilio di utensili:il passo ed i parametri a formato sono selezionati automaticamente dal pannello selezionando la ricetta a formato
Robomaster integrato per Pick-and-Place prodottiPredisposta per collegamenti in lineada/per macchine integrateAmpia gamma di sistemi di alimentazioneautomatica prodotti ad alta velocità, di tipo positivoAlta profondità di formatura (fino a 42 mm)Disponibile anche nella versione a SFRIDO ZERO (FBZ)con trancia veloce (a seconda della configurazione del formato)
‹ FBZ 420zerowasteversion
FBZ 420versionesfridozero
Sistemi visione/OCVSistemi collegamento integratie sincronizzati con astucciatricedi tipo positivoAsolatori e blister sagomati speciali
Size Range / Gamma Formati
Product presence detection(here through vision system)
Controllo presenza prodotto(qui con sistema visione)
Automatic product feedingwith integrated Robomaster
Alimentazione automaticaprodotti con Robomasterintegrato
Forming station
Stazione formatura
Servo-driven webindex gripper 1
Prima pinza traino conmotorizzazione brushless
Filmpreheating
Preriscaldo
Buffer for forming rollnon-stop splicing (option)
Polmone per giunzioneformatura "in corsa" (opzione)
PC-paneloperator Interfaceand machine control
Gestione macchinaed interfaccia operatorecon PC-panel
Heat-Sealingstation
Stazionesaldatura
FB 320 FBZ 320 FB 420 FBZ 420 42 mm 29 mm 42 mm 29 mm
8-50 cycles/min
8-50 8-50cycles/min cycles/min
50-300 50-300cycles/min cycles/min
max 254 mm
220 mm 320 mm
248 mm 248 mm
210 mm 127 mm 310 mm 127 mm500 mm
350 mm
Max forming depth (mm) Profondità formatura max (mm)Mechanical speed Velocità meccanicaForming/Sealing Formatura/Saldatura(Intermittent motion) (moto alternato)
Mechanical speed Velocità meccanicaStandard Cutter Trancia standard
Mechanical speed Velocità meccanicaDie-Cutter Trancia(Continous motion) (moto continuo)
*Max forming area / Area formatura massima (mm)
Film width (A) Fascia (A)
Film index (B) Passo (B)
*Max die-cutting area / Area taglio massima (mm)
Film width (A) Fascia (A)
Film index (B) Passo (B)
‹ FBZ 320zerowasteversion
FBZ 320versionesfridozero
Lidding material unwinderand splice table
Svolgimento materialecopertura con pianogiunzione
Continuous-motionDie-cuttingstation
Stazionetrancia veloce
Separate rejectscollection bins (option)
Contenitori raccolta scartiseparati (opzione)
Servo-driven webindex gripper 2
Seconda pinza trainocon motorizzazione brushless
Preparation forperforating station (option)
Predisposizione stazioneperforazione (opzione)
1/2 mlAmpoules
Fiale
Output / Velocità
max 63.000/h max 84.000/h
max 24.000/h max 48.000/h
FB 320 FBZ 320 FB 420 FBZ 420
1 mlSyringesSiringhe
Thermoformable Film FeedingIncluding double reel holder, motor-driven roll unwinding,film end check with machine stop, splice table.Splice detection and film buffer for non-stopsplicing can be supplied as options.
Alimentazione Bobine di FormaturaCompleta di doppio portabobine, sistema svolgimentomotorizzato, controllo fine bobina con arrestomacchina, tavolo di giunzione.Controllo di giunzione, polmonatura filmper giunzione in corsa disponibili come opzionali.
Heating and Forming StationHardened non-sticking heating plates with individualtemperature controls. The film is heated up over multiplepitches. The plates open apart at each machine stop to avoidfilm overheating. Temperature controllers are integratedin the main HMI.
Forming station, mechanically driven throughservo motor. Mechanical pre-forming station.The thermoforming is achieved by the useof compressed air combined with the mechanicalplug-assist. The thermoforming mould is cooled down.
Stazione di Preriscaldo e FormaturaPiani riscaldanti a contatto, antiaderenti con controllotemperatura individuale. Il materiale è riscaldatosu passi multipli. Apertura dei piani ad ogni arrestomacchina per evitare surriscaldamento del materiale.I termoregolatori sono integrati nel pannello operatore.
Stazione formatura meccanica, azionata da motorebrushless. Stazione preformatura meccanica.La termoformatura è ottenuta utilizzando ariacompressa in combinazione al preformatore meccanico.Lo stampo di formatura è costantemente raffreddato.
Forming / Formatura
CHANGE OVERQuick and easy, tool-less change over.Size moulds, reduced length web guides and die cuttersslide into the stations from the operator side up to fixed mechanicalstops and are locked through quick release handles.All variable parameters are automatically recalled fromthe HMI under a size recipe. One dedicated trolley for the format partsis included in the standard supply.
CAMBIO FORMATOSemplice e veloce, senza l’utilizzo di utensili.Gli stampi, le guide ed il trancia scorrono nelle stazioni dal lato operatore,fino ad una posizione fissa e vengono bloccati con maniglie a ripresa.Tutti i parametri variabili sono selezionabili da pannello operatore,sotto ricetta a formato. Un apposito carrello portaformati è inclusonella fornitura della macchina base.
Work flowvials/ampoules configuration
Flusso di lavoroconfigurazione per flaconi/fiale
Feeding system / Alimentazione
ROBOMASTERIl sistema di alimentazione prodotti robotizzato è parte integrantedella macchina base.Il ROBOMASTER è stato specificatamente sviluppato per l’alimentazionee la manipolazione di prodotti delicati e fragili.La precisione nel prelievo e nel deposito, la sincronizzazione automaticadel sistema con le posizioni di presa prodotto e deposito nel nastroformato, assieme alla facilità di cambio formato rendono il sistemaaffidabile, efficace ed innovativo.
È sviluppato per garantire:Massima semplicità nel cambio formato (senza utensili)e con regolazioni selezionabili sotto ricetta da pannelloGrande flessibilità nella gamma di prodotti trattabiliEfficienza e cura nel trattamento del prodottoOttimizzazione dei tempi di produzione grazie ad una maggiore velocitàMassima semplicità nella pulizia
Il ROBOMASTER è completato di volta in volta dal sistemadi ingresso prodotto più appropriato.
ROBOMASTERThe robotic product feeding system is integratedinto the basic machine.The ROBOMASTER has been specifically designedto gently handle and feed fragile products.The pick-and-place precision, its automatic synchronizationwith the product pick-up and the formed tray positionalong with the easy changeover make the systemhighly reliable, efficient and innovative.
Developed to guarantee:Quick and accurate tool-less changeover,selectable from the HMIHigh flexibility of product rangeEfficiency and care in the product handlingOptimization of production time thanks to a higher outputMaximum ease in cleaning and visibility
The ROBOMASTER is equipped with the most appropriateinfeed systems according to the product to be handled.
Syringes / Siringhe
The syringes arrive hanging in single line, from an upstreamconnected machine: a continuous motion synchrodynamicsystem lays the syringes down in pitch onto the plug-in conveyorpockets, from which they are positively picked-upby the Robomaster.
Le siringhe arrivano dalla macchina a monte appesesu fila singola: vengono messe a passo da unsincronizzatore che le deposita in continuo neicassetti del trasportatore plug-in, da cui vengonoprelevate in positivo dal Robomaster.
Work flowsyringes configuration
Flusso di lavoroconfigurazione per siringhe
AMPOULES, VIALS, CARTRIDGESand other similar cylindrical products
The linear feeding group is managed by the PC of the mainmachine and can be manual from tray or in-line from anupstream labeller. Products move forward along the vibratingtable equipped with servo-motor, which follows through theproducts until they reach a lining-up rail system that guidesthem into the cavities of a rotating drum.The products are then turned of 90° and put in horizontalposition in order to be easily picked up by the head of themachine robot, which places them into the tray or into thebucket chain. In case of pick-up fail, products are dischargedat the end of the vibratory table, on a chute. Products feedingspeed is adjusted from display.
FIALE, FLACONI, CARPULEe prodotti cilindrici simili
L’alimentazione in piano viene gestita dal PC della macchinaa cui è abbinata e può essere manuale da cassetta o in lineada etichettatrice a monte. L’avanzamento dei prodotti avvienemediante un piano vibrante dotato di motorizzazione brushless,il quale provvede ad accompagnare i prodotti fino adun sistema che li guida negli alveoli di un tamburo rotante.I prodotti vengono poi ruotati di 90° e disposti quindiin posizione orizzontale per prepararli alla presa da partedel robot con testa a ventose, che li deposita nel cassonettoo nella catena a cassetti. In caso di mancata presa, è previstolo scarto su scivolo a fine tavolo. La velocità di avanzamentodei prodotti è comandata da display.
Drum divided in two sections;it allows to feed two different products
using the same loader.
Il tamburo è diviso in due sezioni;consente di alimentare due distinti prodotti
usando lo stesso caricatore
Feeding system / Alimentazione
Example of combined feeding of two differentproducts: vials from the linear accumulationtable and syringes from the plug-inconveyor belt.All the systems can receive the productsdirectly in line from the upstream machines(labellers etc..)
Esempio di alimentazione combinata di dueprodotti diversi: flaconi da tavolo accumuloe siringhe da nastro plug-in.Tutti i sistemi possono ricevere i prodottidirettamente in linea dalle macchinea monte (etichettatrici etc…)
Possibility of feeding the machine from twodifferent vibrating tables to increase theflexibility of the tray configuration.
Possibilità di alimentare la macchina dadue tavoli vibranti distinti, per aumentare laflessibilità nella configurazione del prodotto.
Multiple kit feeding / Alimentazioni multiple kit
Buffer can be implemented throughout theline, to balance the individual machines stopsand drastically increase line efficiency.The Robomaster is programmed withpersonalized production logics accordingto the product configuration.
Possibilità di configurare la linea con sistemidi buffer per garantire continuità massimaalla linea di produzione. Il Robomaster vieneprogrammato con logiche di produzionepersonalizzate a seconda dellaconfigurazione definita.
Heat-sealing station includes:lidding foil unwinder from roll, with splice table.Servo-driven lower seal station. High-pressure pneumatic upperstation, for immediate station opening upon machine stop.Integrated temperature controller into the HMI.Cooling circuit into and after sealing stationto remove induced heat from the pack.Print registration and splice detectionsavailable as option.*Movable cooling plate (option).
Die-cutting unit and product outfeedFB: multiple die cutting stationwith cutter ejectors to positively lay-downcut trays onto the outfeed conveyor.Integrated waste materialcutter with waste collection.
Stazione di taglio e uscita prodottoFB: stazione trancia multiplocompleta di deposito per aspirazionedei cassonetti su nastro uscita.Taglia-sfrido integrato consistema raccolta.
Die cutting unit and product outfeedFBZ: high-speed die-cutter, for zerocross-waste, to cut one tray at a timewithout cross-waste.Positive cut tray lay-down, flightedoutfeed conveyor and side-waste aspirationsystem are included.
Stazione di taglio e uscita prodottoFBZ: stazione trancia veloce, sfrido zero,per taglio di un singolo tray alla voltasenza sfrido trasversale.Deposito positivo su nastro uscitaa tasche ed aspirazione sfridi laterali.
Stazione saldatura a caldo completa di:svolgimento materiale copertura da bobina,con tavolo giunzione. Stazione inferiore con motorizzazionebrushless. Stazione superiore con sistema pneumatico ad altapressione, per una apertura immediata in caso di arresto macchina.Termoregolatore stazione integrato in pannello operatore.Stazione con circuito raffreddamento per rimuovere dalla confezioneil calore indotto. Centratura stampa e controllo giunzionedisponibili come opzione.*Piano raffreddamento mobile (opzionale).
Sealing, cutting and outfeed / Saldatura, taglio ed uscita
Des
ign
Arg
en
to e
Ch
ina
- p
h.
C. B
erto
lini
Ed
itio
n o
cto
ber
201
5
Marchesini Group Div. Farconvia G. Bellodi, 441012 Carpi - Modena - Italytel +39 059 64 76 11 - fax +39 059 69 70 90
Headquarters:Marchesini Group S.p.A.via Nazionale, 10040065 Pianoro - Bologna - Italytel +39 051 65 187 11 - fax +39 051 65 164 [email protected] - www.marchesini.com
Size range may change in accordance withthe different applications.
I limiti di formato possono cambiare a secondadelle diverse applicazioni.
The technical specifications given hereby are subjectto change without prior notice or without liability.
Le specifiche tecniche qui riportatesono perciò suscettibili di cambiamento.
The Marchesini Group continuously updatetheir products to market needs.
Marchesini Group adatta costantementei propri prodotti alle esigenze del mercato.
FB / FBZ Deep Draw ThermoformerTechnical data (base machine only) Dati tecnici (macchina base) FB 320 FB 420Outfeed height Altezza di uscita 800-860 mm 800-860 mmPower installed Potenza installatamachine with sealing station macchina con stazione saldatura 31 KW 36 KW
Power installed Potenza installatamachine without sealing station macchina senza stazione saldatura 28 KW 30 KW
Compressed air consumption (6-8 bar) Consumo aria compressa (6-8 bar)machine with sealing station macchina con saldatura 1100 Nl/min 1150 Nl/min
Compressed air consumption (6-8 bar) Consumo aria compressa (6-8 bar)machine without sealing station macchina senza saldatura 950 Nl/min 1000 Nl/min
Cooling water consumption Consumo acqua raffreddamentomachine with sealing station macchina con stazione saldatura ca. 300 L/h ca. 370 L/h
Cooling water consumption Consumo acqua raffreddamentomachine without sealing station macchina senza stazione saldatura ca. 250 L/h ca. 300 L/h
Net weight Peso netto ca. 6000 Kg ca. 7000 Kg
Divisione